Fix locktest and add lease testing to it
cover Fix locktest and add lease testing to it
From: Ira Weiny <[email protected]>
Rather than have a separate lease test, combine the previously proposed lease tests[1] directly to locktest because they share so much code.
To make things cleaner update the lock test code and test script. This includes fixing a rather serious bug.
Finally update the error output to help identify any steps which fail during testing.
Ira
[1] https://www.spinics.net/lists/fstests/msg12467.html
Ira Weiny (13):
src/locktest: Remove unnecessary sleep src/locktest: Remove OPEN macro
src/locktest: Change command macro names src/locktest: Add get_cmd_str
src/locktest.c: Clean up client command passing src/locktest.c: Fix return code if last test fails generic/131: Clean up pid variables
generic/131: Save stderr for debugging src/locktest: Add simple lease testing src/locktest: Add lease testing for basic signal reception src/locktest: Add truncate lease tests src/locktest: Clean up error output src/locktest: Audit all debug output
src/locktest.c | 957 ++++++++++++++++++++++++++++++---------------- tests/generic/131 | 72 ++-- 2 files changed, 666 insertions(+), 363 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/13 src/locktest: Remove unnecessary sleep
From: Ira Weiny <[email protected]>
There is no need to sleep because we asked for debugging. Remove extra sleep code.
--- src/locktest.c | 5 ----- 1 file changed, 5 deletions(-)
src/locktest.c +0 -5
@@ -69,7 +69,6 @@ extern int h_errno;#define RAND () (rand())#define SRAND (s) (srand(s)) -#define SLEEP (s) (sleep(s))#define MIN (A ,B ) (((A)<(B))?(A):(B))#define MAX (A ,B ) (((A)>(B))?(A):(B))
@@ -1037,10 +1036,6 @@ main(int argc, char *argv[]) } } } -if (debug >1 ) { -fprintf (stderr,"server sleeping ...\n" ); -SLEEP (1 ); - }if (tests[index][TEST_NUM ] !=0 ) {if (last_test != tests[index][TEST_NUM ]) { test_count++;
Signature · 1 line
2.20.1
PATCH 2/13 src/locktest: Remove OPEN macro
In reply to [email protected]From: Ira Weiny <[email protected]>
The code is much cleaner without this macro. While here add extra debug output as well.
--- src/locktest.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
src/locktest.c +6 -3
@@ -61,7 +61,6 @@ extern int h_errno;#define HANDLE int#define INVALID_HANDLE -1 -#define OPEN (N ,F ) (open(N, F|O_CREAT|O_BINARY, 0644))#define SEEK (H ,O ) (lseek(H, O, SEEK_SET))#define READ (H ,B ,L ) (read(H, B, L))#define WRITE (H ,B ,L ) (write(H, B, L))
@@ -598,12 +597,16 @@ initialize(HANDLE fd)int do_open (int flag) { -if ((f_fd =OPEN (filename, flag)) ==INVALID_HANDLE ) { +int flags = flag|O_CREAT |O_BINARY ; + +if (debug >1 ) +fprintf (stderr,"do_open %s 0x%x\n" , filename, flags); + +if ((f_fd =open (filename, flags,0666 )) ==INVALID_HANDLE ) {perror ("shared file create" );return FAIL ;/*NOTREACHED*/ } -return PASS ; }
Signature · 1 line
2.20.1
PATCH 3/13 src/locktest: Change command macro names
In reply to [email protected]From: Ira Weiny <[email protected]>
The macro names for commands are not consistent. Change them such that they are not confused with other flags and macros within the test.
--- src/locktest.c | 546 ++++++++++++++++++++++++------------------------- 1 file changed, 273 insertions(+), 273 deletions(-)
src/locktest.c +273 -273
@@ -87,13 +87,13 @@ static SOCKET s_fd = -1; /* listen socket */static SOCKET c_fd =-1 ;/* IPC socket */ static HANDLE f_fd =INVALID_HANDLE ;/* shared file */ -#define WRLOCK 0 -#define RDLOCK 1 -#define UNLOCK 2 -#define F_CLOSE 3 -#define F_OPEN 4 -#define WRTEST 5 -#define RDTEST 6 +#define CMD_WRLOCK 0 +#define CMD_RDLOCK 1 +#define CMD_UNLOCK 2 +#define CMD_CLOSE 3 +#define CMD_OPEN 4 +#define CMD_WRTEST 5 +#define CMD_RDTEST 6#define PASS 1#define FAIL 0
@@ -175,361 +175,361 @@ static int64_t tests[][6] = {/* Various simple tests exercising the list */ -/* SECTION 1: WRITE and UNLOCK with the same process (SERVER) */ +/* SECTION 1: WRITE and CMD_UNLOCK with the same process (SERVER) */ /* Add a lock to an empty list */ - {1, WRLOCK, 1, 10, PASS, SERVER }, - {1, UNLOCK, 1, 10, PASS, SERVER }, + {1, CMD_WRLOCK, 1, 10, PASS, SERVER }, + {1, CMD_UNLOCK, 1, 10, PASS, SERVER },/* Add a lock to the start and end of a list - 1, 13 - no overlap */ - {2, WRLOCK, 10, 10, PASS, SERVER }, - {2, WRLOCK, 30, 10, PASS, SERVER }, - {2, WRLOCK, 50, 10, PASS, SERVER }, - {2, WRLOCK, 1, 5, PASS, SERVER }, - {2, WRLOCK, 70, 5, PASS, SERVER }, + {2, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {2, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {2, CMD_WRLOCK, 50, 10, PASS, SERVER }, + {2, CMD_WRLOCK, 1, 5, PASS, SERVER }, + {2, CMD_WRLOCK, 70, 5, PASS, SERVER }, - {2, UNLOCK, 10, 10, PASS, SERVER }, - {2, UNLOCK, 30, 10, PASS, SERVER }, - {2, UNLOCK, 50, 10, PASS, SERVER }, - {2, UNLOCK, 1, 5, PASS, SERVER }, - {2, UNLOCK, 70, 5, PASS, SERVER }, + {2, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {2, CMD_UNLOCK, 30, 10, PASS, SERVER }, + {2, CMD_UNLOCK, 50, 10, PASS, SERVER }, + {2, CMD_UNLOCK, 1, 5, PASS, SERVER }, + {2, CMD_UNLOCK, 70, 5, PASS, SERVER },/* Add a lock to the middle of a list - no overlap */ - {3, WRLOCK, 10, 10, PASS, SERVER }, - {3, WRLOCK, 30, 10, PASS, SERVER }, - {3, WRLOCK, 50, 10, PASS, SERVER }, - {3, WRLOCK, 42, 5, PASS, SERVER }, + {3, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {3, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {3, CMD_WRLOCK, 50, 10, PASS, SERVER }, + {3, CMD_WRLOCK, 42, 5, PASS, SERVER }, - {3, UNLOCK, 10, 10, PASS, SERVER }, - {3, UNLOCK, 30, 10, PASS, SERVER }, - {3, UNLOCK, 50, 10, PASS, SERVER }, - {3, UNLOCK, 42, 5, PASS, SERVER }, + {3, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {3, CMD_UNLOCK, 30, 10, PASS, SERVER }, + {3, CMD_UNLOCK, 50, 10, PASS, SERVER }, + {3, CMD_UNLOCK, 42, 5, PASS, SERVER },/* Add different lock types to middle of the list - overlap exact match - 3 */ - {4, WRLOCK, 10, 10, PASS, SERVER }, - {4, WRLOCK, 30, 10, PASS, SERVER }, - {4, WRLOCK, 50, 10, PASS, SERVER }, + {4, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {4, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {4, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Exact match - same lock type */ - {4, WRLOCK, 30, 10, PASS, SERVER }, + {4, CMD_WRLOCK, 30, 10, PASS, SERVER },/* Exact match - different lock type */ - {4, RDLOCK, 30, 10, PASS, SERVER }, + {4, CMD_RDLOCK, 30, 10, PASS, SERVER },/* Exact match - unlock */ - {4, UNLOCK, 30, 10, PASS, SERVER }, + {4, CMD_UNLOCK, 30, 10, PASS, SERVER },/* New lock - as above, inserting in the list again */ - {4, WRLOCK, 30, 10, PASS, SERVER }, + {4, CMD_WRLOCK, 30, 10, PASS, SERVER }, - {4, UNLOCK, 10, 10, PASS, SERVER }, - {4, UNLOCK, 30, 10, PASS, SERVER }, - {4, UNLOCK, 50, 10, PASS, SERVER }, + {4, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {4, CMD_UNLOCK, 30, 10, PASS, SERVER }, + {4, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock which completely overlaps any old lock in the list - 4,5,6 */ - {5, WRLOCK, 10, 10, PASS, SERVER }, - {5, WRLOCK, 30, 10, PASS, SERVER }, - {5, WRLOCK, 50, 10, PASS, SERVER }, + {5, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {5, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {5, CMD_WRLOCK, 50, 10, PASS, SERVER },/* The start is the same, end overlaps */ - {5, WRLOCK, 30, 15, PASS, SERVER }, + {5, CMD_WRLOCK, 30, 15, PASS, SERVER },/* The start is before, end is the same */ - {5, WRLOCK, 25, 20, PASS, SERVER }, + {5, CMD_WRLOCK, 25, 20, PASS, SERVER },/* Both start and end overlap */ - {5, WRLOCK, 22, 26, PASS, SERVER }, + {5, CMD_WRLOCK, 22, 26, PASS, SERVER }, - {5, UNLOCK, 10, 10, PASS, SERVER }, - {5, UNLOCK, 22, 26, PASS, SERVER }, - {5, UNLOCK, 50, 10, PASS, SERVER }, + {5, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {5, CMD_UNLOCK, 22, 26, PASS, SERVER }, + {5, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock which itself is completely overlaped by any old lock in the list - 7,8,10 */ - {6, WRLOCK, 10, 10, PASS, SERVER }, - {6, WRLOCK, 30, 10, PASS, SERVER }, - {6, WRLOCK, 50, 10, PASS, SERVER }, + {6, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {6, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {6, CMD_WRLOCK, 50, 10, PASS, SERVER },/* The start is the same, end is in the middle of old lock - NOP */ - {6, WRLOCK, 30, 5, PASS, SERVER }, + {6, CMD_WRLOCK, 30, 5, PASS, SERVER },/* The start and end are in the middle of old lock - NOP */ - {6, WRLOCK, 32, 6, PASS, SERVER }, + {6, CMD_WRLOCK, 32, 6, PASS, SERVER },/* Start in the middle and end is the same - NOP */ - {6, WRLOCK, 32, 8, PASS, SERVER }, + {6, CMD_WRLOCK, 32, 8, PASS, SERVER }, - {6, UNLOCK, 10, 10, PASS, SERVER }, - {6, UNLOCK, 30, 10, PASS, SERVER }, - {6, UNLOCK, 32, 8, PASS, SERVER }, - {6, UNLOCK, 50, 10, PASS, SERVER }, + {6, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {6, CMD_UNLOCK, 30, 10, PASS, SERVER }, + {6, CMD_UNLOCK, 32, 8, PASS, SERVER }, + {6, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock which starts before any old lock in the list - 2,9 */ - {7, WRLOCK, 10, 10, PASS, SERVER }, - {7, WRLOCK, 30, 10, PASS, SERVER }, - {7, WRLOCK, 50, 10, PASS, SERVER }, + {7, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {7, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {7, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Here is the new lock */ - {7, WRLOCK, 27, 10, PASS, SERVER }, + {7, CMD_WRLOCK, 27, 10, PASS, SERVER },/* Go again with the end of the new lock matching the start of old lock */ - {7, WRLOCK, 25, 2, PASS, SERVER }, + {7, CMD_WRLOCK, 25, 2, PASS, SERVER }, - {7, UNLOCK, 10, 10, PASS, SERVER }, - {7, UNLOCK, 25, 15, PASS, SERVER }, - {7, UNLOCK, 50, 10, PASS, SERVER }, + {7, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {7, CMD_UNLOCK, 25, 15, PASS, SERVER }, + {7, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock which starts in the middle of any old lock in the list and ends after - 11,12 */ - {8, WRLOCK, 10, 10, PASS, SERVER }, - {8, WRLOCK, 30, 10, PASS, SERVER }, - {8, WRLOCK, 50, 10, PASS, SERVER }, + {8, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {8, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {8, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Here is the new lock */ - {8, WRLOCK, 35, 10, PASS, SERVER }, + {8, CMD_WRLOCK, 35, 10, PASS, SERVER },/* Go again with the end of the new lock matching the start of old lock */ - {8, WRLOCK, 45, 2, PASS, SERVER }, + {8, CMD_WRLOCK, 45, 2, PASS, SERVER }, - {8, UNLOCK, 10, 10, PASS, SERVER }, - {8, UNLOCK, 30, 17, PASS, SERVER }, - {8, UNLOCK, 50, 10, PASS, SERVER }, -/* SECTION 2: Overlapping READ and WRITE and UNLOCK with the same process (SERVER) */ + {8, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {8, CMD_UNLOCK, 30, 17, PASS, SERVER }, + {8, CMD_UNLOCK, 50, 10, PASS, SERVER }, +/* SECTION 2: Overlapping READ and WRITE and CMD_UNLOCK with the same process (SERVER) */ /* Add different new lock types which completely overlaps any old lock in the list - 4,5,6 */ - {9, WRLOCK, 10, 10, PASS, SERVER }, - {9, WRLOCK, 30, 10, PASS, SERVER }, - {9, WRLOCK, 50, 10, PASS, SERVER }, + {9, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {9, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {9, CMD_WRLOCK, 50, 10, PASS, SERVER },/* The start is the same, end overlaps */ - {9, RDLOCK, 30, 15, PASS, SERVER }, + {9, CMD_RDLOCK, 30, 15, PASS, SERVER },/* The start is before, end is the same */ - {9, WRLOCK, 25, 20, PASS, SERVER }, + {9, CMD_WRLOCK, 25, 20, PASS, SERVER },/* Both start and end overlap */ - {9, RDLOCK, 22, 26, PASS, SERVER }, + {9, CMD_RDLOCK, 22, 26, PASS, SERVER }, - {9, UNLOCK, 10, 10, PASS, SERVER }, - {9, UNLOCK, 22, 26, PASS, SERVER }, - {9, UNLOCK, 50, 10, PASS, SERVER }, + {9, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {9, CMD_UNLOCK, 22, 26, PASS, SERVER }, + {9, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add different new locks which are completely overlaped by an old lock in the list - 7,8,10 */ - {10, WRLOCK, 10, 10, PASS, SERVER }, - {10, WRLOCK, 30, 10, PASS, SERVER }, - {10, WRLOCK, 50, 10, PASS, SERVER }, + {10, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {10, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {10, CMD_WRLOCK, 50, 10, PASS, SERVER },/* The start is the same, end is in the middle of old lock */ - {10, RDLOCK, 30, 5, PASS, SERVER }, + {10, CMD_RDLOCK, 30, 5, PASS, SERVER },/* The start and end are in the middle of a lock */ - {10, WRLOCK, 32, 2, PASS, SERVER }, + {10, CMD_WRLOCK, 32, 2, PASS, SERVER },/* Start in the middle and end is the same */ - {10, RDLOCK, 36, 5, PASS, SERVER }, + {10, CMD_RDLOCK, 36, 5, PASS, SERVER }, - {10, UNLOCK, 10, 10, PASS, SERVER }, - {10, UNLOCK, 30, 11, PASS, SERVER }, - {10, UNLOCK, 50, 10, PASS, SERVER }, + {10, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {10, CMD_UNLOCK, 30, 11, PASS, SERVER }, + {10, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add different new lock types which start before the old lock in the list - 2,9 */ - {11, WRLOCK, 10, 10, PASS, SERVER }, - {11, WRLOCK, 30, 10, PASS, SERVER }, - {11, WRLOCK, 50, 10, PASS, SERVER }, + {11, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {11, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {11, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Here is the new lock */ - {11, RDLOCK, 27, 10, PASS, SERVER }, + {11, CMD_RDLOCK, 27, 10, PASS, SERVER },/* Go again with the end of the new lock matching the start of lock */ - {11, WRLOCK, 25, 3, PASS, SERVER }, + {11, CMD_WRLOCK, 25, 3, PASS, SERVER }, - {11, UNLOCK, 10, 10, PASS, SERVER }, - {11, UNLOCK, 25, 15, PASS, SERVER }, - {11, UNLOCK, 50, 10, PASS, SERVER }, + {11, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {11, CMD_UNLOCK, 25, 15, PASS, SERVER }, + {11, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add different new lock types which start in the middle of an old lock in the list and end after - 11,12 */ - {12, WRLOCK, 10, 10, PASS, SERVER }, - {12, WRLOCK, 30, 10, PASS, SERVER }, - {12, WRLOCK, 50, 10, PASS, SERVER }, + {12, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {12, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {12, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Here is the new lock */ - {12, RDLOCK, 35, 10, PASS, SERVER }, + {12, CMD_RDLOCK, 35, 10, PASS, SERVER },/* Go again with the end of the new lock matching the start of old lock */ - {12, WRLOCK, 44, 3, PASS, SERVER }, + {12, CMD_WRLOCK, 44, 3, PASS, SERVER }, - {12, UNLOCK, 10, 10, PASS, SERVER }, - {12, UNLOCK, 30, 18, PASS, SERVER }, - {12, UNLOCK, 50, 10, PASS, SERVER }, + {12, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {12, CMD_UNLOCK, 30, 18, PASS, SERVER }, + {12, CMD_UNLOCK, 50, 10, PASS, SERVER }, -/* SECTION 3: Overlapping READ and WRITE and UNLOCK with the different processes (CLIENT/SERVER) */ +/* SECTION 3: Overlapping READ and WRITE and CMD_UNLOCK with the different processes (CLIENT/SERVER) */ /* Add new lock, differing types and processes, to middle of the list - exact overlap match - 3 */ - {13, WRLOCK, 10, 10, PASS, SERVER }, - {13, WRLOCK, 30, 10, PASS, SERVER }, - {13, RDLOCK, 50, 10, PASS, SERVER }, + {13, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {13, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {13, CMD_RDLOCK, 50, 10, PASS, SERVER },/* Same lock type, different process */ - {13, WRLOCK, 30, 10, FAIL, CLIENT }, - {13, RDLOCK, 50, 10, PASS, CLIENT }, + {13, CMD_WRLOCK, 30, 10, FAIL, CLIENT }, + {13, CMD_RDLOCK, 50, 10, PASS, CLIENT },/* Exact match - different lock type, different process */ - {13, RDLOCK, 30, 10, FAIL, CLIENT }, + {13, CMD_RDLOCK, 30, 10, FAIL, CLIENT },/* Exact match - unlock */ - {13, UNLOCK, 30, 10, PASS, CLIENT }, + {13, CMD_UNLOCK, 30, 10, PASS, CLIENT },/* New lock - as above, inserting in the list again */ - {13, UNLOCK, 30, 10, PASS, SERVER }, + {13, CMD_UNLOCK, 30, 10, PASS, SERVER },/* Exact match - same lock type, different process */ - {13, WRLOCK, 30, 10, PASS, CLIENT }, + {13, CMD_WRLOCK, 30, 10, PASS, CLIENT }, - {13, UNLOCK, 10, 10, PASS, SERVER }, - {13, UNLOCK, 30, 10, PASS, CLIENT }, - {13, UNLOCK, 50, 10, PASS, SERVER }, + {13, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {13, CMD_UNLOCK, 30, 10, PASS, CLIENT }, + {13, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock, differing types and processes, which completely overlap any of the locks in the list - 4,5,6 */ - {14, WRLOCK, 10, 10, PASS, SERVER }, - {14, WRLOCK, 30, 10, PASS, SERVER }, - {14, RDLOCK, 50, 10, PASS, SERVER }, + {14, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {14, CMD_WRLOCK, 30, 10, PASS, SERVER }, + {14, CMD_RDLOCK, 50, 10, PASS, SERVER },/* The start is the same, end overlaps */ - {14, RDLOCK, 30, 15, FAIL, CLIENT }, - {14, WRLOCK, 30, 15, FAIL, CLIENT }, + {14, CMD_RDLOCK, 30, 15, FAIL, CLIENT }, + {14, CMD_WRLOCK, 30, 15, FAIL, CLIENT },/* The start is before, end is the same */ - {14, RDLOCK, 25, 20, FAIL, CLIENT }, - {14, WRLOCK, 25, 20, FAIL, CLIENT }, + {14, CMD_RDLOCK, 25, 20, FAIL, CLIENT }, + {14, CMD_WRLOCK, 25, 20, FAIL, CLIENT },/* Both start and end overlap */ - {14, RDLOCK, 22, 26, FAIL, CLIENT }, - {14, WRLOCK, 22, 26, FAIL, CLIENT }, + {14, CMD_RDLOCK, 22, 26, FAIL, CLIENT }, + {14, CMD_WRLOCK, 22, 26, FAIL, CLIENT },/* The start is the same, end overlaps */ - {14, RDLOCK, 50, 15, PASS, CLIENT }, - {14, WRLOCK, 50, 17, FAIL, CLIENT }, + {14, CMD_RDLOCK, 50, 15, PASS, CLIENT }, + {14, CMD_WRLOCK, 50, 17, FAIL, CLIENT },/* The start is before, end is the same */ - {14, RDLOCK, 45, 20, PASS, CLIENT }, - {14, WRLOCK, 43, 22, FAIL, CLIENT }, + {14, CMD_RDLOCK, 45, 20, PASS, CLIENT }, + {14, CMD_WRLOCK, 43, 22, FAIL, CLIENT },/* Both start and end overlap */ - {14, RDLOCK, 42, 26, PASS, CLIENT }, - {14, WRLOCK, 41, 28, FAIL, CLIENT }, + {14, CMD_RDLOCK, 42, 26, PASS, CLIENT }, + {14, CMD_WRLOCK, 41, 28, FAIL, CLIENT }, - {14, UNLOCK, 10, 10, PASS, SERVER }, - {14, UNLOCK, 22, 26, PASS, SERVER }, - {14, UNLOCK, 42, 26, PASS, CLIENT }, + {14, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {14, CMD_UNLOCK, 22, 26, PASS, SERVER }, + {14, CMD_UNLOCK, 42, 26, PASS, CLIENT },/* Add new lock, differing types and processes, which are completely overlaped by an old lock in the list - 7,8,10 */ - {15, WRLOCK, 10, 10, PASS, SERVER }, - {15, RDLOCK, 30, 10, PASS, SERVER }, - {15, WRLOCK, 50, 10, PASS, SERVER }, + {15, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {15, CMD_RDLOCK, 30, 10, PASS, SERVER }, + {15, CMD_WRLOCK, 50, 10, PASS, SERVER },/* The start is the same, end is in the middle of old lock */ - {15, RDLOCK, 50, 5, FAIL, CLIENT }, - {15, WRLOCK, 50, 5, FAIL, CLIENT }, + {15, CMD_RDLOCK, 50, 5, FAIL, CLIENT }, + {15, CMD_WRLOCK, 50, 5, FAIL, CLIENT },/* The start and end are in the middle of old lock */ - {15, RDLOCK, 52, 6, FAIL, CLIENT }, - {15, WRLOCK, 52, 6, FAIL, CLIENT }, + {15, CMD_RDLOCK, 52, 6, FAIL, CLIENT }, + {15, CMD_WRLOCK, 52, 6, FAIL, CLIENT },/* Start in the middle and end is the same */ - {15, RDLOCK, 52, 8, FAIL, CLIENT }, - {15, WRLOCK, 52, 8, FAIL, CLIENT }, + {15, CMD_RDLOCK, 52, 8, FAIL, CLIENT }, + {15, CMD_WRLOCK, 52, 8, FAIL, CLIENT },/* The start is the same, end is in the middle of old lock */ - {15, RDLOCK, 30, 5, PASS, CLIENT }, - {15, WRLOCK, 30, 5, FAIL, CLIENT }, + {15, CMD_RDLOCK, 30, 5, PASS, CLIENT }, + {15, CMD_WRLOCK, 30, 5, FAIL, CLIENT },/* The start and end are in the middle of old lock */ - {15, RDLOCK, 32, 6, PASS, CLIENT }, - {15, WRLOCK, 32, 6, FAIL, CLIENT }, + {15, CMD_RDLOCK, 32, 6, PASS, CLIENT }, + {15, CMD_WRLOCK, 32, 6, FAIL, CLIENT },/* Start in the middle and end is the same */ - {15, RDLOCK, 32, 8, PASS, CLIENT }, - {15, WRLOCK, 32, 8, FAIL, CLIENT }, + {15, CMD_RDLOCK, 32, 8, PASS, CLIENT }, + {15, CMD_WRLOCK, 32, 8, FAIL, CLIENT }, - {15, UNLOCK, 10, 10, PASS, SERVER }, - {15, UNLOCK, 30, 10, PASS, SERVER }, - {15, UNLOCK, 50, 10, PASS, SERVER }, + {15, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {15, CMD_UNLOCK, 30, 10, PASS, SERVER }, + {15, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock, differing types and processes, which start before a lock in the list - 2,9 */ - {16, RDLOCK, 10, 10, PASS, SERVER }, - {16, WRLOCK, 50, 10, PASS, SERVER }, + {16, CMD_RDLOCK, 10, 10, PASS, SERVER }, + {16, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Start is before, end is the start of the old lock in list */ - {16, RDLOCK, 5, 6, PASS, CLIENT }, - {16, WRLOCK, 5, 6, FAIL, CLIENT }, + {16, CMD_RDLOCK, 5, 6, PASS, CLIENT }, + {16, CMD_WRLOCK, 5, 6, FAIL, CLIENT },/* Start is before, end is in the middle of the old lock */ - {16, RDLOCK, 5, 10, PASS, CLIENT }, - {16, WRLOCK, 5, 10, FAIL, CLIENT }, + {16, CMD_RDLOCK, 5, 10, PASS, CLIENT }, + {16, CMD_WRLOCK, 5, 10, FAIL, CLIENT },/* Start is before, end is the start of the old lock in list */ - {16, RDLOCK, 45, 6, FAIL, CLIENT }, - {16, WRLOCK, 45, 6, FAIL, CLIENT }, + {16, CMD_RDLOCK, 45, 6, FAIL, CLIENT }, + {16, CMD_WRLOCK, 45, 6, FAIL, CLIENT },/* Start is before, end is in the middle of the old lock */ - {16, RDLOCK, 45, 10, FAIL, CLIENT }, - {16, WRLOCK, 45, 10, FAIL, CLIENT }, + {16, CMD_RDLOCK, 45, 10, FAIL, CLIENT }, + {16, CMD_WRLOCK, 45, 10, FAIL, CLIENT }, - {16, UNLOCK, 5, 15, PASS, CLIENT }, - {16, UNLOCK, 30, 10, PASS, SERVER }, - {16, UNLOCK, 50, 10, PASS, SERVER }, + {16, CMD_UNLOCK, 5, 15, PASS, CLIENT }, + {16, CMD_UNLOCK, 30, 10, PASS, SERVER }, + {16, CMD_UNLOCK, 50, 10, PASS, SERVER },/* Add new lock, differing types and processes, which starts in the middle of a lock, and ends after - 11,12 */ - {17, WRLOCK, 10, 10, PASS, SERVER }, - {17, RDLOCK, 30, 10, PASS, SERVER }, - {17, WRLOCK, 50, 10, PASS, SERVER }, + {17, CMD_WRLOCK, 10, 10, PASS, SERVER }, + {17, CMD_RDLOCK, 30, 10, PASS, SERVER }, + {17, CMD_WRLOCK, 50, 10, PASS, SERVER },/* Start in the middle, end after lock in list */ - {17, WRLOCK, 35, 10, FAIL, CLIENT }, + {17, CMD_WRLOCK, 35, 10, FAIL, CLIENT },/* Start matches end of lock in list */ - {17, RDLOCK, 35, 10, PASS, CLIENT }, - {17, RDLOCK, 44, 2, PASS, CLIENT }, + {17, CMD_RDLOCK, 35, 10, PASS, CLIENT }, + {17, CMD_RDLOCK, 44, 2, PASS, CLIENT },/* Start in the middle, end after lock in list */ - {17, RDLOCK, 55, 10, FAIL, CLIENT }, - {17, WRLOCK, 55, 10, FAIL, CLIENT }, + {17, CMD_RDLOCK, 55, 10, FAIL, CLIENT }, + {17, CMD_WRLOCK, 55, 10, FAIL, CLIENT },/* Start matches end of lock in list */ - {17, RDLOCK, 59, 5, FAIL, CLIENT }, - {17, WRLOCK, 59, 5, FAIL, CLIENT }, + {17, CMD_RDLOCK, 59, 5, FAIL, CLIENT }, + {17, CMD_WRLOCK, 59, 5, FAIL, CLIENT }, - {17, UNLOCK, 10, 10, PASS, SERVER }, - {17, UNLOCK, 30, 16, PASS, CLIENT }, - {17, UNLOCK, 50, 10, PASS, SERVER }, + {17, CMD_UNLOCK, 10, 10, PASS, SERVER }, + {17, CMD_UNLOCK, 30, 16, PASS, CLIENT }, + {17, CMD_UNLOCK, 50, 10, PASS, SERVER },/* SECTION 4: overlapping and EOF tests */ /* Acquire overlapping ranges */ - {18, WRLOCK, 11, 7, PASS, SERVER }, - {18, WRLOCK, 13, 8, FAIL, CLIENT }, - {18, UNLOCK, 11, 7, PASS, SERVER }, + {18, CMD_WRLOCK, 11, 7, PASS, SERVER }, + {18, CMD_WRLOCK, 13, 8, FAIL, CLIENT }, + {18, CMD_UNLOCK, 11, 7, PASS, SERVER },/* Acquire different ranges beyond EOF */ - {19, WRLOCK, 10, FILE_SIZE, PASS, SERVER }, - {19, WRLOCK, FILE_SIZE + 10, 10, PASS, CLIENT }, - {19, UNLOCK, 10, FILE_SIZE, PASS, SERVER }, - {19, UNLOCK, FILE_SIZE + 10, 10, PASS, CLIENT }, + {19, CMD_WRLOCK, 10, FILE_SIZE, PASS, SERVER }, + {19, CMD_WRLOCK, FILE_SIZE + 10, 10, PASS, CLIENT }, + {19, CMD_UNLOCK, 10, FILE_SIZE, PASS, SERVER }, + {19, CMD_UNLOCK, FILE_SIZE + 10, 10, PASS, CLIENT },/* Acquire same range beyong EOF */ - {20, WRLOCK, 10, FILE_SIZE, PASS, SERVER, }, - {20, WRLOCK, 10, FILE_SIZE, FAIL, CLIENT, }, - {20, UNLOCK, 10, FILE_SIZE, PASS, SERVER, }, + {20, CMD_WRLOCK, 10, FILE_SIZE, PASS, SERVER, }, + {20, CMD_WRLOCK, 10, FILE_SIZE, FAIL, CLIENT, }, + {20, CMD_UNLOCK, 10, FILE_SIZE, PASS, SERVER, }, /* Acquire whole file lock */ - {21, WRLOCK, 0, 0, PASS, SERVER, }, - {21, WRLOCK, 0, 0, FAIL, CLIENT, }, - {21, UNLOCK, 0, 0, PASS, SERVER, }, + {21, CMD_WRLOCK, 0, 0, PASS, SERVER, }, + {21, CMD_WRLOCK, 0, 0, FAIL, CLIENT, }, + {21, CMD_UNLOCK, 0, 0, PASS, SERVER, }, /* Acquire whole file lock, then range */ - {22, WRLOCK, 0, 0, PASS, SERVER, }, - {22, WRLOCK, 1, 5, FAIL, CLIENT, }, - {22, UNLOCK, 0, 0, PASS, SERVER, }, + {22, CMD_WRLOCK, 0, 0, PASS, SERVER, }, + {22, CMD_WRLOCK, 1, 5, FAIL, CLIENT, }, + {22, CMD_UNLOCK, 0, 0, PASS, SERVER, }, /* Acquire non-overlapping read locks */ - {23, RDLOCK, 1, 5, PASS, SERVER, }, - {23, RDLOCK, 7, 6, PASS, CLIENT, }, - {23, UNLOCK, 1, 5, PASS, SERVER, }, - {23, UNLOCK, 7, 6, PASS, CLIENT, }, + {23, CMD_RDLOCK, 1, 5, PASS, SERVER, }, + {23, CMD_RDLOCK, 7, 6, PASS, CLIENT, }, + {23, CMD_UNLOCK, 1, 5, PASS, SERVER, }, + {23, CMD_UNLOCK, 7, 6, PASS, CLIENT, }, /* Acquire overlapping read locks */ - {24, RDLOCK, 1, 5, PASS, SERVER, }, - {24, RDLOCK, 2, 6, PASS, CLIENT, }, - {24, UNLOCK, 1, 5, PASS, SERVER, }, - {24, UNLOCK, 1, 7, PASS, CLIENT, }, + {24, CMD_RDLOCK, 1, 5, PASS, SERVER, }, + {24, CMD_RDLOCK, 2, 6, PASS, CLIENT, }, + {24, CMD_UNLOCK, 1, 5, PASS, SERVER, }, + {24, CMD_UNLOCK, 1, 7, PASS, CLIENT, }, /* Acquire non-overlapping read and write locks */ - {25, RDLOCK, 1, 5, PASS, SERVER, }, - {25, WRLOCK, 7, 6, PASS, CLIENT, }, - {25, UNLOCK, 1, 5, PASS, SERVER, }, - {25, UNLOCK, 7, 6, PASS, CLIENT, }, + {25, CMD_RDLOCK, 1, 5, PASS, SERVER, }, + {25, CMD_WRLOCK, 7, 6, PASS, CLIENT, }, + {25, CMD_UNLOCK, 1, 5, PASS, SERVER, }, + {25, CMD_UNLOCK, 7, 6, PASS, CLIENT, }, /* Acquire overlapping read and write locks */ - {26, RDLOCK, 1, 5, PASS, SERVER, }, - {26, WRLOCK, 2, 6, FAIL, CLIENT, }, - {26, UNLOCK, 1, 5, PASS, SERVER, }, + {26, CMD_RDLOCK, 1, 5, PASS, SERVER, }, + {26, CMD_WRLOCK, 2, 6, FAIL, CLIENT, }, + {26, CMD_UNLOCK, 1, 5, PASS, SERVER, }, /* Acquire whole file lock, then close (without unlocking) */ - {27, WRLOCK, 0, 0, PASS, SERVER, }, - {27, WRLOCK, 1, 5, FAIL, CLIENT, }, - {27, F_CLOSE,0, 0, PASS, SERVER, }, - {27, WRLOCK, 1, 5, PASS, CLIENT, }, - {27, F_OPEN, O_RDWR, 0, PASS, SERVER, }, - {27, UNLOCK, 1, 5, PASS, CLIENT, }, + {27, CMD_WRLOCK, 0, 0, PASS, SERVER, }, + {27, CMD_WRLOCK, 1, 5, FAIL, CLIENT, }, + {27, CMD_CLOSE,0, 0, PASS, SERVER, }, + {27, CMD_WRLOCK, 1, 5, PASS, CLIENT, }, + {27, CMD_OPEN, O_RDWR, 0, PASS, SERVER, }, + {27, CMD_UNLOCK, 1, 5, PASS, CLIENT, }, /* Acquire two read locks, close one file and then reopen to check that first lock still exists */ - {28, RDLOCK, 1, 5, PASS, SERVER, }, - {28, RDLOCK, 1, 5, PASS, CLIENT, }, - {28, F_CLOSE,0, 0, PASS, SERVER, }, - {28, F_OPEN, O_RDWR, 0, PASS, SERVER, }, - {28, WRLOCK, 0, 0, FAIL, SERVER, }, - {28, UNLOCK, 1, 5, PASS, SERVER, }, + {28, CMD_RDLOCK, 1, 5, PASS, SERVER, }, + {28, CMD_RDLOCK, 1, 5, PASS, CLIENT, }, + {28, CMD_CLOSE,0, 0, PASS, SERVER, }, + {28, CMD_OPEN, O_RDWR, 0, PASS, SERVER, }, + {28, CMD_WRLOCK, 0, 0, FAIL, SERVER, }, + {28, CMD_UNLOCK, 1, 5, PASS, SERVER, }, /* Verify that F_GETLK for F_WRLCK doesn't require that file be opened for write */ - {29, F_CLOSE, 0, 0, PASS, SERVER, }, - {29, F_OPEN, O_RDONLY, 0, PASS, SERVER, }, - {29, WRTEST, 0, 0, PASS, SERVER, }, - {29, F_CLOSE,0, 0, PASS, SERVER, }, - {29, F_OPEN, O_RDWR, 0, PASS, SERVER, }, + {29, CMD_CLOSE, 0, 0, PASS, SERVER, }, + {29, CMD_OPEN, O_RDONLY, 0, PASS, SERVER, }, + {29, CMD_WRTEST, 0, 0, PASS, SERVER, }, + {29, CMD_CLOSE,0, 0, PASS, SERVER, }, + {29, CMD_OPEN, O_RDWR, 0, PASS, SERVER, }, #ifdef macosx /* Close the opened file and open the file with SHLOCK, other client will try to open with SHLOCK too */ - {30, F_CLOSE,0, 0, PASS, SERVER, }, - {30, F_OPEN, O_RDWR|O_SHLOCK|O_NONBLOCK, 0, PASS, SERVER, }, - {30, F_CLOSE,0, 0, PASS, CLIENT, }, - {30, F_OPEN, O_RDWR|O_SHLOCK|O_NONBLOCK, 0, PASS, CLIENT, }, + {30, CMD_CLOSE,0, 0, PASS, SERVER, }, + {30, CMD_OPEN, O_RDWR|O_SHLOCK|O_NONBLOCK, 0, PASS, SERVER, }, + {30, CMD_CLOSE,0, 0, PASS, CLIENT, }, + {30, CMD_OPEN, O_RDWR|O_SHLOCK|O_NONBLOCK, 0, PASS, CLIENT, }, /* Close the opened file and open the file with SHLOCK, other client will try to open with EXLOCK */ - {31, F_CLOSE,0, 0, PASS, SERVER, }, - {31, F_CLOSE,0, 0, PASS, CLIENT, }, - {31, F_OPEN, O_RDWR|O_SHLOCK|O_NONBLOCK, 0, PASS, SERVER, }, - {31, F_OPEN, O_RDWR|O_EXLOCK|O_NONBLOCK, 0, FAIL, CLIENT, }, + {31, CMD_CLOSE,0, 0, PASS, SERVER, }, + {31, CMD_CLOSE,0, 0, PASS, CLIENT, }, + {31, CMD_OPEN, O_RDWR|O_SHLOCK|O_NONBLOCK, 0, PASS, SERVER, }, + {31, CMD_OPEN, O_RDWR|O_EXLOCK|O_NONBLOCK, 0, FAIL, CLIENT, }, /* Close the opened file and open the file with EXLOCK, other client will try to open with EXLOCK too */ - {32, F_CLOSE,0, 0, PASS, SERVER, }, - {32, F_CLOSE,0, 0, FAIL, CLIENT, }, - {32, F_OPEN, O_RDWR|O_EXLOCK|O_NONBLOCK, 0, PASS, SERVER, }, - {32, F_OPEN, O_RDWR|O_EXLOCK|O_NONBLOCK, 0, FAIL, CLIENT, }, - {32, F_CLOSE,0, 0, PASS, SERVER, }, - {32, F_CLOSE,0, 0, FAIL, CLIENT, }, - {32, F_OPEN, O_RDWR, 0, PASS, SERVER, }, - {32, F_OPEN, O_RDWR, 0, PASS, CLIENT, }, + {32, CMD_CLOSE,0, 0, PASS, SERVER, }, + {32, CMD_CLOSE,0, 0, FAIL, CLIENT, }, + {32, CMD_OPEN, O_RDWR|O_EXLOCK|O_NONBLOCK, 0, PASS, SERVER, }, + {32, CMD_OPEN, O_RDWR|O_EXLOCK|O_NONBLOCK, 0, FAIL, CLIENT, }, + {32, CMD_CLOSE,0, 0, PASS, SERVER, }, + {32, CMD_CLOSE,0, 0, FAIL, CLIENT, }, + {32, CMD_OPEN, O_RDWR, 0, PASS, SERVER, }, + {32, CMD_OPEN, O_RDWR, 0, PASS, CLIENT, }, #endif /* macosx */ /* indicate end of array */ {0,0,0,0,0,SERVER},
@@ -962,25 +962,25 @@ main(int argc, char *argv[])if (tests[index][TEST_NUM ] !=0 ) {switch (tests[index][COMMAND ]) { -case WRLOCK : +case CMD_WRLOCK : result =do_lock (F_SETLK ,F_WRLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case RDLOCK : +case CMD_RDLOCK : result =do_lock (F_SETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case UNLOCK : +case CMD_UNLOCK : result =do_lock (F_SETLK ,F_UNLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case F_CLOSE : +case CMD_CLOSE : result =do_close ();break ; -case F_OPEN : +case CMD_OPEN : result =do_open (tests[index][FLAGS ]);break ; -case WRTEST : +case CMD_WRTEST : result =do_lock (F_GETLK ,F_WRLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case RDTEST : +case CMD_RDTEST : result =do_lock (F_GETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; }
@@ -989,10 +989,10 @@ main(int argc, char *argv[])/* We have a failure */ if (debug)fprintf (stderr,"Server failure in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , - ctl.test, tests[index][COMMAND ]==WRLOCK ?"write lock" : - tests[index][COMMAND ]==RDLOCK ?"read lock" : - tests[index][COMMAND ]==UNLOCK ?"unlock" : - tests[index][COMMAND ]==F_OPEN ?"open" :"clos" , + ctl.test, tests[index][COMMAND ]==CMD_WRLOCK ?"write lock" : + tests[index][COMMAND ]==CMD_RDLOCK ?"read lock" : + tests[index][COMMAND ]==CMD_UNLOCK ?"unlock" : + tests[index][COMMAND ]==CMD_OPEN ?"open" :"clos" , (long long )tests[index][OFFSET ], (long long )tests[index][LENGTH ], saved_errno,strerror (saved_errno));
@@ -1009,10 +1009,10 @@ main(int argc, char *argv[]) }if (debug >1 )fprintf (stderr,"Sending command to client (%d) - %s - %lld:%lld\n" , - index, tests[index][COMMAND ]==WRLOCK ?"write lock" : - tests[index][COMMAND ]==RDLOCK ?"read lock" : - tests[index][COMMAND ]==UNLOCK ?"unlock" : - tests[index][COMMAND ]==F_OPEN ?"open" :"clos" , + index, tests[index][COMMAND ]==CMD_WRLOCK ?"write lock" : + tests[index][COMMAND ]==CMD_RDLOCK ?"read lock" : + tests[index][COMMAND ]==CMD_UNLOCK ?"unlock" : + tests[index][COMMAND ]==CMD_OPEN ?"open" :"clos" , (long long )tests[index][OFFSET ], (long long )tests[index][LENGTH ]);/* get the client to do something */
@@ -1027,10 +1027,10 @@ main(int argc, char *argv[]) fail_flag++;if (debug)fprintf (stderr,"Client failure in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , - ctl.test, ctl.command==WRLOCK ?"write lock" : - ctl.command==RDLOCK ?"read lock" : - ctl.command==UNLOCK ?"unlock" : - ctl.command==F_OPEN ?"open" :"clos" , + ctl.test, ctl.command==CMD_WRLOCK ?"write lock" : + ctl.command==CMD_RDLOCK ?"read lock" : + ctl.command==CMD_UNLOCK ?"unlock" : + ctl.command==CMD_OPEN ?"open" :"clos" , (long long )ctl.offset, (long long )ctl.length, ctl.error,strerror (ctl.error)); fprintf(stderr, "Client failure in %lld:%s\n",
@@ -1074,25 +1074,25 @@ main(int argc, char *argv[]) ctl.offset = tests[index][OFFSET ]; ctl.length = tests[index][LENGTH ];switch (tests[index][COMMAND ]) { -case WRLOCK : +case CMD_WRLOCK : result =do_lock (F_SETLK ,F_WRLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case RDLOCK : +case CMD_RDLOCK : result =do_lock (F_SETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case UNLOCK : +case CMD_UNLOCK : result =do_lock (F_SETLK ,F_UNLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case F_CLOSE : +case CMD_CLOSE : result =do_close ();break ; -case F_OPEN : +case CMD_OPEN : result =do_open (tests[index][FLAGS ]);break ; -case WRTEST : +case CMD_WRTEST : result =do_lock (F_GETLK ,F_WRLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; -case RDTEST : +case CMD_RDTEST : result =do_lock (F_GETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; }
Signature · 1 line
2.20.1
PATCH 4/13 src/locktest: Add get_cmd_str
In reply to [email protected]From: Ira Weiny <[email protected]>
Rather than open code printing the strings, use a helper function.
--- src/locktest.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-)
src/locktest.c +18 -12
@@ -109,6 +109,19 @@ static HANDLE f_fd = INVALID_HANDLE; /* shared file */#define WHO 5#define FLAGS 2/* index 2 is also used for do_open() flag, see below */ +static char *get_cmd_str (int cmd) +{ +switch (cmd) { +case CMD_WRLOCK :return "write lock" ;break ; +case CMD_RDLOCK :return "read lock" ;break ; +case CMD_UNLOCK :return "unlock" ;break ; +case CMD_CLOSE :return "close" ;break ; +case CMD_OPEN :return "open" ;break ; +case CMD_WRTEST :return "Wait for SIGIO" ;break ; +case CMD_RDTEST :return "Truncate" ;break ; + } +return "unknown" ; +}/* * flags for Mac OS X do_open() * O_RDONLY 0x0000
@@ -989,10 +1002,8 @@ main(int argc, char *argv[])/* We have a failure */ if (debug)fprintf (stderr,"Server failure in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , - ctl.test, tests[index][COMMAND ]==CMD_WRLOCK ?"write lock" : - tests[index][COMMAND ]==CMD_RDLOCK ?"read lock" : - tests[index][COMMAND ]==CMD_UNLOCK ?"unlock" : - tests[index][COMMAND ]==CMD_OPEN ?"open" :"clos" , + ctl.test, +get_cmd_str (tests[index][COMMAND ]), (long long )tests[index][OFFSET ], (long long )tests[index][LENGTH ], saved_errno,strerror (saved_errno));
@@ -1009,10 +1020,8 @@ main(int argc, char *argv[]) }if (debug >1 )fprintf (stderr,"Sending command to client (%d) - %s - %lld:%lld\n" , - index, tests[index][COMMAND ]==CMD_WRLOCK ?"write lock" : - tests[index][COMMAND ]==CMD_RDLOCK ?"read lock" : - tests[index][COMMAND ]==CMD_UNLOCK ?"unlock" : - tests[index][COMMAND ]==CMD_OPEN ?"open" :"clos" , + index, +get_cmd_str (ctl.command), (long long )tests[index][OFFSET ], (long long )tests[index][LENGTH ]);/* get the client to do something */
@@ -1027,10 +1036,7 @@ main(int argc, char *argv[]) fail_flag++;if (debug)fprintf (stderr,"Client failure in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , - ctl.test, ctl.command==CMD_WRLOCK ?"write lock" : - ctl.command==CMD_RDLOCK ?"read lock" : - ctl.command==CMD_UNLOCK ?"unlock" : - ctl.command==CMD_OPEN ?"open" :"clos" , + ctl.test,get_cmd_str (ctl.command), (long long )ctl.offset, (long long )ctl.length, ctl.error,strerror (ctl.error)); fprintf(stderr, "Client failure in %lld:%s\n",
Signature · 1 line
2.20.1
PATCH 5/13 src/locktest.c: Clean up client command passing
In reply to [email protected]From: Ira Weiny <[email protected]>
The client was using the test index rather than the values being passed to it for a command. While this technically worked it is cleaner to fully initialize the command message and use the values in that message.
--- src/locktest.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-)
src/locktest.c +23 -13
@@ -670,6 +670,17 @@ int do_close(void)return PASS ; } +static void init_ctl (int32_t index) +{ + ctl.test= (int32_t )tests[index][TEST_NUM ]; + ctl.command = (int32_t )tests[index][COMMAND ]; + ctl.offset = tests[index][OFFSET ]; + ctl.length = tests[index][LENGTH ]; + ctl.index = index; + ctl.result = (int32_t )tests[index][RESULT ]; + ctl.error =0 ; +} +void send_ctl (void ) {
@@ -1018,6 +1029,8 @@ main(int argc, char *argv[]) ctl.test =0 ; end=1 ; } +/* get the client to do something */ +init_ctl (index);if (debug >1 ) fprintf(stderr, "Sending command to client (%d) - %s - %lld:%lld\n", index,
@@ -1074,20 +1087,16 @@ main(int argc, char *argv[]) end =1 ;break ; } - - ctl.command = tests[index][COMMAND ]; - ctl.offset = tests[index][OFFSET ]; - ctl.length = tests[index][LENGTH ]; -switch (tests[index][COMMAND ]) { +switch (ctl.command) {case CMD_WRLOCK : - result =do_lock (F_SETLK ,F_WRLCK , tests[index][OFFSET ], tests[index][LENGTH ]); + result =do_lock (F_SETLK ,F_WRLCK , ctl.offset, ctl.length);break ;case CMD_RDLOCK : - result =do_lock (F_SETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]); + result =do_lock (F_SETLK ,F_RDLCK , ctl.offset, ctl.length);break ;case CMD_UNLOCK : - result =do_lock (F_SETLK ,F_UNLCK , tests[index][OFFSET ], tests[index][LENGTH ]); + result =do_lock (F_SETLK ,F_UNLCK , ctl.offset, ctl.length);break ;case CMD_CLOSE : result =do_close ();
@@ -1096,21 +1105,22 @@ main(int argc, char *argv[]) result =do_open (tests[index][FLAGS ]);break ;case CMD_WRTEST : - result =do_lock (F_GETLK ,F_WRLCK , tests[index][OFFSET ], tests[index][LENGTH ]); + result =do_lock (F_GETLK ,F_WRLCK , ctl.offset, ctl.length);break ;case CMD_RDTEST : - result =do_lock (F_GETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]); + result =do_lock (F_GETLK ,F_RDLCK , ctl.offset, ctl.length);break ; } -if ( result != tests[index][RESULT ] ) { +if ( result != ctl.result ) {if (debug) -fprintf (stderr,"Got %d, wanted %lld\n" , result, - (long long )tests[index][RESULT ]); +fprintf (stderr,"Got %d, wanted %d\n" , + result, ctl.result); ctl.result =FAIL ; ctl.error = saved_errno; fail_count++; }else { ctl.result =PASS ; + ctl.error =0 ; }if (debug >2 )fprintf (stderr,"client: sending result to server (%d)\n" , ctl.index);
Signature · 1 line
2.20.1
PATCH 6/13 src/locktest.c: Fix return code if last test fails
In reply to [email protected]From: Ira Weiny <[email protected]>
If anything but the first step of the last test fails, the exit code (fail_count) was not properly set. Fix this such that follow on patches will be able to save error output and correctly inform the script that a failure has occurred rather than just expecting random output to fail the diff check.
The issue is last_test is not properly tracking which test the loop is currently on. Therefore fail_count would not be incremented correctly.
Remove the special case of checking for the end of the steps array and track last_test properly. Then adjust test_count to be correct for the new code.
--- src/locktest.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
src/locktest.c +9 -12
@@ -963,7 +963,7 @@ main(int argc, char *argv[])int end =0 ;int result =0 ;int last_test =0 ; -int test_count =0 ; +int test_count =-1 ;int fail_flag =0 ;while (!end) {if (server) {
@@ -1058,15 +1058,13 @@ main(int argc, char *argv[]) } } } -if (tests[index][TEST_NUM ] !=0 ) { -if (last_test != tests[index][TEST_NUM ]) { - test_count++; -if (fail_flag) - fail_count++; - fail_flag =0 ; - } - last_test = tests[index][TEST_NUM ]; +if (last_test != tests[index][TEST_NUM ]) { + test_count++; +if (fail_flag) + fail_count++; + fail_flag =0 ; + last_test = tests[index][TEST_NUM ]; } index++;
@@ -1126,9 +1124,8 @@ main(int argc, char *argv[])fprintf (stderr,"client: sending result to server (%d)\n" , ctl.index);/* Send result to the server */ send_ctl (); -if (tests[index][TEST_NUM ] !=0 ) { -if (last_test != tests[index][TEST_NUM ]) - test_count++; +if (last_test != tests[index][TEST_NUM ]) { + test_count++; last_test = tests[index][TEST_NUM ]; } }
Signature · 1 line
2.20.1
PATCH 7/13 generic/131: Clean up pid variables
In reply to [email protected]From: Ira Weiny <[email protected]>
Change the name of the variables to reflect the client vs server. This will help in future patches.
--- tests/generic/131 | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
tests/generic/131 +5 -5
@@ -17,8 +17,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { - kill $locktest_pid2 > /dev/null 2>&1 - kill $locktest_pid1 > /dev/null 2>&1 + kill $client_pid > /dev/null 2>&1 + kill $server_pid > /dev/null 2>&1 } # get standard environment, filters and checks
@@ -38,7 +38,7 @@ touch $TEST_DIR/server.out # Start the server src/locktest $TESTFILE 2>&1 > $TEST_DIR/server.out & -locktest_pid1=$! +server_pid=$! timeout=30 while [ $timeout -gt 0 ]; do
@@ -50,7 +50,7 @@ while [ $timeout -gt 0 ]; do fi # check the existence of server process - if ! kill -s 0 $locktest_pid1 >/dev/null 2>&1; then + if ! kill -s 0 $server_pid >/dev/null 2>&1; then echo "Server died abnormally" exit 1 fi
@@ -65,7 +65,7 @@ fi # Start the client src/locktest -p $PORT -h localhost $TESTFILE 2>&1 > $TEST_DIR/client.out -locktest_pid2=$! +client_pid=$! result=$? if [ $result -eq 0 ]; then echo success!
Signature · 1 line
2.20.1
PATCH 8/13 generic/131: Save stderr for debugging
In reply to [email protected]From: Ira Weiny <[email protected]>
Details of which internal step failed within a test are lost without additional debugging output. Save that output by separating stdout and stderr.
This allows the server port to be written solely to stdout for consumption by the script. Then all error output can be sent to the seqres.full file in the event of a failure. Then, depend on the return code of the server _and_ the client to detect failure and save the error output for inspection.
--- tests/generic/131 | 63 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 45 insertions(+), 18 deletions(-)
tests/generic/131 +45 -18
@@ -14,11 +14,15 @@ here=`pwd` tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 +debug="-d" + +TESTFILE=$TEST_DIR/lock_file _cleanup() { kill $client_pid > /dev/null 2>&1 kill $server_pid > /dev/null 2>&1 + rm -f $TESTFILE } # get standard environment, filters and checks
@@ -31,48 +35,71 @@ _supported_os Linux _require_test _require_test_fcntl_advisory_locks -TESTFILE=$TEST_DIR/lock_file +# set up log files +SERVER_LOG=$TEST_DIR/server.out +rm -f $SERVER_LOG +touch $SERVER_LOG +SERVER_PORT=$TEST_DIR/server.port +rm -f $SERVER_PORT +touch $SERVER_PORT +CLIENT_LOG=$TEST_DIR/client.out +rm -f $CLIENT_LOG +touch $CLIENT_LOG + +touch $TESTFILE + +function dump_logs_fail() +{ + fail_str=$1 -rm -f $TEST_DIR/server.out -touch $TEST_DIR/server.out + echo " ***** Client log *****" >> $seqres.full + cat $CLIENT_LOG >> $seqres.full + echo " ***** Server log *****" >> $seqres.full + cat $SERVER_LOG >> $seqres.full + echo " ***** End file details *****" >> $seqres.full + ls -la $TESTFILE >> $seqres.full + _fail $fail_str + exit 1 +} # Start the server -src/locktest $TESTFILE 2>&1 > $TEST_DIR/server.out & +src/locktest $debug $TESTFILE 2> $SERVER_LOG 1> $SERVER_PORT & server_pid=$! timeout=30 while [ $timeout -gt 0 ]; do sleep 1 - PORT=$(cat $TEST_DIR/server.out | grep "^server port: " | awk '{print $3}') + PORT=$(cat $SERVER_PORT | grep "^server port: " | awk '{print $3}') if [ -n "$PORT" ]; then break fi # check the existence of server process if ! kill -s 0 $server_pid >/dev/null 2>&1; then - echo "Server died abnormally" - exit 1 + dump_logs_fail "Server died abnormally" fi let timeout=timeout-1 done if [ -z "$PORT" ]; then - echo "Could not get server port" - exit 1 + dump_logs_fail "Could not get server port" fi # Start the client -src/locktest -p $PORT -h localhost $TESTFILE 2>&1 > $TEST_DIR/client.out + +src/locktest $debug -p $PORT -h localhost $TESTFILE 2> $CLIENT_LOG +client_result=$? client_pid=$! -result=$? -if [ $result -eq 0 ]; then - echo success! - status=0 -else - echo "Client reported failure ($result)" - cat $TEST_DIR/*.out +if [ $client_result -ne 0 ]; then + dump_logs_fail "Client reported failure ($client_result)" fi - +wait $server_pid +server_result=$? +if [ $server_result -ne 0 ]; then + dump_logs_fail "Server reported failure ($server_result)" +fi +echo success! +status=0 exit
Signature · 1 line
2.20.1
PATCH 9/13 src/locktest: Add simple lease testing
In reply to [email protected]From: Ira Weiny <[email protected]>
/* 33 */"Take Read Lease", /* 34 */"Take Write Lease", /* 35 */"Fail Write Lease if file is open somewhere else", /* 36 */"Fail Read Lease if opened with write permissions",
--- src/locktest.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 86 insertions(+), 5 deletions(-)
src/locktest.c +86 -5
@@ -1,11 +1,12 @@// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2000-2003 Silicon Graphics, Inc. +* Copyright (c) 2019 Intel Corp. * All Rights Reserved. */ /* -* Synchronized byte range lock exerciser +* Synchronized byte range lock and lease exerciser */ #include <stdio.h>
@@ -94,6 +95,8 @@ static HANDLE f_fd = INVALID_HANDLE; /* shared file */#define CMD_OPEN 4#define CMD_WRTEST 5#define CMD_RDTEST 6 +#define CMD_SETLEASE 7 +#define CMD_GETLEASE 8#define PASS 1#define FAIL 0
@@ -108,6 +111,7 @@ static HANDLE f_fd = INVALID_HANDLE; /* shared file */#define RESULT 4#define WHO 5#define FLAGS 2/* index 2 is also used for do_open() flag, see below */ +#define ARG FLAGS/* Arguments for Lease operations */ static char *get_cmd_str (int cmd) {
@@ -119,6 +123,8 @@ static char *get_cmd_str(int cmd)case CMD_OPEN :return "open" ;break ;case CMD_WRTEST :return "Wait for SIGIO" ;break ;case CMD_RDTEST :return "Truncate" ;break ; +case CMD_SETLEASE :return "Set Lease" ;break ; +case CMD_GETLEASE :return "Get Lease" ;break ; }return "unknown" ; }
@@ -176,15 +182,19 @@ char *descriptions[] = {/* 27 */ "Acquire whole file write lock and then close without unlocking (and attempt a lock)" ,/* 28 */ "Acquire two read locks, close and reopen the file, and test if the inital lock is still there" ,/* 29 */ "Verify that F_GETLK for F_WRLCK doesn't require that file be opened for write" , - #if defined(macosx) +/* if defined(macosx) ; These must be defined to keep the array intact */ /* 30 */ "Close the opened file and open the file with SHLOCK, other client will try to open with SHLOCK too" ,/* 31 */ "Close the opened file and open the file with SHLOCK, other client will try to open with EXLOCK" , -/* 32 */ "Close the opened file and open the file with EXLOCK, other client will try to open with EXLOCK too" - #endif +/* 32 */ "Close the opened file and open the file with EXLOCK, other client will try to open with EXLOCK too" , +/* endif */ +/* 33 */ "Take Read Lease" , +/* 34 */ "Take Write Lease" , +/* 35 */ "Fail Write Lease if file is open somewhere else" , + /* 36 */"Fail Read Lease if opened with write permissions", };static int64_t tests[][6 ] = -/* test # Action [offset|flags] length expected server/client */ +/* test # Action [offset|flags|arg] length expected server/client */ { /* Various simple tests exercising the list */
@@ -544,6 +554,38 @@ static int64_t tests[][6] = {32, CMD_OPEN, O_RDWR, 0, PASS, SERVER, }, {32, CMD_OPEN, O_RDWR, 0, PASS, CLIENT, }, #endif /* macosx */ + +/* SECTION 5: Simple verification of being able to take leases */ + /* Take Read Lease */ + {33, CMD_CLOSE, 0, 0, PASS, CLIENT }, + {33, CMD_OPEN, O_RDONLY, 0, PASS, CLIENT }, + {33, CMD_CLOSE, 0, 0, PASS, SERVER }, + {33, CMD_OPEN, O_RDONLY, 0, PASS, SERVER }, + {33, CMD_SETLEASE, F_RDLCK, 0, PASS, SERVER }, + {33, CMD_GETLEASE, F_RDLCK, 0, PASS, SERVER }, + {33, CMD_SETLEASE, F_UNLCK, 0, PASS, SERVER }, + {33, CMD_CLOSE, 0, 0, PASS, SERVER }, + {33, CMD_CLOSE, 0, 0, PASS, CLIENT }, + + /* Take Write Lease */ + {34, CMD_OPEN, O_RDWR, 0, PASS, SERVER }, + {34, CMD_SETLEASE, F_WRLCK, 0, PASS, SERVER }, + {34, CMD_GETLEASE, F_WRLCK, 0, PASS, SERVER }, + {34, CMD_SETLEASE, F_UNLCK, 0, PASS, SERVER }, + {34, CMD_CLOSE, 0, 0, PASS, SERVER }, + /* Fail Write Lease with other users */ + {35, CMD_OPEN, O_RDONLY, 0, PASS, CLIENT }, + {35, CMD_OPEN, O_RDWR, 0, PASS, SERVER }, + {35, CMD_SETLEASE, F_WRLCK, 0, FAIL, SERVER }, + {35, CMD_GETLEASE, F_WRLCK, 0, FAIL, SERVER }, + {35, CMD_CLOSE, 0, 0, PASS, SERVER }, + {35, CMD_CLOSE, 0, 0, PASS, CLIENT }, + /* Fail Read Lease if opened for write */ + {36, CMD_OPEN, O_RDWR, 0, PASS, SERVER }, + {36, CMD_SETLEASE, F_RDLCK, 0, FAIL, SERVER }, + {36, CMD_GETLEASE, F_RDLCK, 0, FAIL, SERVER }, + {36, CMD_CLOSE, 0, 0, PASS, SERVER }, + /* indicate end of array */ {0,0,0,0,0,SERVER}, {0,0,0,0,0,CLIENT}
@@ -653,6 +695,32 @@ static int do_lock(int cmd, int type, int start, int length)return (ret==0 ?PASS :FAIL ); } +static int do_lease (int cmd,int arg,int expected) +{ +int ret; + +if (debug >1 ) +fprintf (stderr,"do_lease: cmd=%d arg=%d exp=%X\n" , + cmd, arg, expected); + +if (f_fd <0 ) +return f_fd; + + errno =0 ; + + ret =fcntl (f_fd, cmd, arg); + saved_errno = errno; + +if (expected && (expected == ret)) + ret =0 ; + +if (debug >1 && ret) +fprintf (stderr,"%s do_lease: ret = %d, errno = %d (%s)\n" , + __FILE__, ret, errno,strerror (errno)); + +return (ret==0 ?PASS :FAIL ); +} +int do_close (void ) {if (debug >1 ) {
@@ -1007,6 +1075,12 @@ main(int argc, char *argv[])case CMD_RDTEST : result =do_lock (F_GETLK ,F_RDLCK , tests[index][OFFSET ], tests[index][LENGTH ]);break ; +case CMD_SETLEASE : + result =do_lease (F_SETLEASE , tests[index][ARG ],0 ); +break ; +case CMD_GETLEASE : + result =do_lease (F_GETLEASE , tests[index][ARG ], tests[index][ARG ]); +break ; }if ( result != tests[index][RESULT ]) { fail_flag++;
@@ -1108,6 +1182,13 @@ main(int argc, char *argv[])case CMD_RDTEST : result =do_lock (F_GETLK ,F_RDLCK , ctl.offset, ctl.length);break ; +/* NOTE offset carries the argument values */ +case CMD_SETLEASE : + result =do_lease (F_SETLEASE , ctl.offset,0 ); +break ; +case CMD_GETLEASE : + result =do_lease (F_GETLEASE , ctl.offset, ctl.offset); +break ; }if ( result != ctl.result ) {if (debug)
Signature · 1 line
2.20.1
PATCH 10/13 src/locktest: Add lease testing for basic signal reception
In reply to [email protected]From: Ira Weiny <[email protected]>
/* 37 */"Read lease gets SIGIO on write open", /* 38 */"Write lease gets SIGIO on read open", /* 39 */"Read lease does _not_ get SIGIO on read open", /* 40 */"Read lease gets SIGIO on write open",
--- src/locktest.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 132 insertions(+), 2 deletions(-)
src/locktest.c +132 -2
@@ -27,6 +27,8 @@#include <byteswap.h> #include <errno.h> #include <string.h> +#include <signal.h> +#define HEX_2_ASC (x) ((x) > 9) ? (x)-10+'a' : (x)+'0'#define FILE_SIZE 1024#define PLATFORM_INIT ()/*no-op*/
@@ -83,6 +85,7 @@ static int server = 1;static int port =0 ;static int testnumber =-1 ;static int saved_errno =0 ; +static int got_sigio =0 ;static SOCKET s_fd =-1 ;/* listen socket */ static SOCKET c_fd =-1 ;/* IPC socket */
@@ -97,6 +100,8 @@ static HANDLE f_fd = INVALID_HANDLE; /* shared file */#define CMD_RDTEST 6#define CMD_SETLEASE 7#define CMD_GETLEASE 8 +#define CMD_SIGIO 9 +#define CMD_WAIT_SIGIO 10#define PASS 1#define FAIL 0
@@ -112,6 +117,7 @@ static HANDLE f_fd = INVALID_HANDLE; /* shared file */#define WHO 5#define FLAGS 2/* index 2 is also used for do_open() flag, see below */ #define ARG FLAGS/* Arguments for Lease operations */ +#define TIME FLAGS/* Time for waiting on sigio */ static char *get_cmd_str (int cmd) {
@@ -125,6 +131,8 @@ static char *get_cmd_str(int cmd)case CMD_RDTEST :return "Truncate" ;break ;case CMD_SETLEASE :return "Set Lease" ;break ;case CMD_GETLEASE :return "Get Lease" ;break ; +case CMD_SIGIO :return "Setup SIGIO" ;break ; +case CMD_WAIT_SIGIO :return "Wait for SIGIO" ;break ; }return "unknown" ; }
@@ -191,10 +199,15 @@ char *descriptions[] = {/* 34 */ "Take Write Lease" ,/* 35 */ "Fail Write Lease if file is open somewhere else" ,/* 36 */ "Fail Read Lease if opened with write permissions" , +/* 37 */ "Read lease gets SIGIO on write open" , +/* 38 */ "Write lease gets SIGIO on read open" , +/* 39 */ "Read lease does _not_ get SIGIO on read open" , + /* 40 */"Read lease gets SIGIO on write open", };static int64_t tests[][6 ] =/* test # Action [offset|flags|arg] length expected server/client */ +/* [sigio_wait_time] */ { /* Various simple tests exercising the list */
@@ -586,6 +599,47 @@ static int64_t tests[][6] = {36, CMD_GETLEASE, F_RDLCK, 0, FAIL, SERVER }, {36, CMD_CLOSE, 0, 0, PASS, SERVER }, +/* SECTION 2: Proper SIGIO notifications */ +/* Get SIGIO when read lease is broken by write */ + {37, CMD_OPEN, O_RDONLY, 0, PASS, CLIENT }, + {37, CMD_SETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {37, CMD_GETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {37, CMD_SIGIO, 0, 0, PASS, CLIENT }, + {37, CMD_OPEN, O_RDWR, 0, PASS, SERVER }, + {37, CMD_WAIT_SIGIO, 5, 0, PASS, CLIENT }, + {37, CMD_CLOSE, 0, 0, PASS, SERVER }, + {37, CMD_CLOSE, 0, 0, PASS, CLIENT }, + +/* Get SIGIO when write lease is broken by read */ + {38, CMD_OPEN, O_RDWR, 0, PASS, CLIENT }, + {38, CMD_SETLEASE, F_WRLCK, 0, PASS, CLIENT }, + {38, CMD_GETLEASE, F_WRLCK, 0, PASS, CLIENT }, + {38, CMD_SIGIO, 0, 0, PASS, CLIENT }, + {38, CMD_OPEN, O_RDONLY, 0, PASS, SERVER }, + {38, CMD_WAIT_SIGIO, 5, 0, PASS, CLIENT }, + {38, CMD_CLOSE, 0, 0, PASS, SERVER }, + {38, CMD_CLOSE, 0, 0, PASS, CLIENT }, + +/* Don't get SIGIO when read lease is taken by read */ + {39, CMD_OPEN, O_RDONLY, 0, PASS, CLIENT }, + {39, CMD_SETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {39, CMD_GETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {39, CMD_SIGIO, 0, 0, PASS, CLIENT }, + {39, CMD_OPEN, O_RDONLY, 0, PASS, SERVER }, + {39, CMD_WAIT_SIGIO, 5, 0, FAIL, CLIENT }, + {39, CMD_CLOSE, 0, 0, PASS, SERVER }, + {39, CMD_CLOSE, 0, 0, PASS, CLIENT }, + +/* Get SIGIO when Read lease is broken by Write */ + {40, CMD_OPEN, O_RDONLY, 0, PASS, CLIENT }, + {40, CMD_SETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {40, CMD_GETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {40, CMD_SIGIO, 0, 0, PASS, CLIENT }, + {40, CMD_OPEN, O_RDWR, 0, PASS, SERVER }, + {40, CMD_WAIT_SIGIO, 5, 0, PASS, CLIENT }, + {40, CMD_CLOSE, 0, 0, PASS, SERVER }, + {40, CMD_CLOSE, 0, 0, PASS, CLIENT }, +/* indicate end of array */ {0,0,0,0,0,SERVER}, {0,0,0,0,0,CLIENT}
@@ -649,6 +703,67 @@ initialize(HANDLE fd) } } +void release_lease (int fd) +{ +int rc; + + rc =fcntl (fd,F_SETLEASE ,F_UNLCK ); +if (debug && rc !=0 ) +fprintf (stderr,"%s Failed to remove lease %d : %d %s\n" , + __FILE__, rc, errno,strerror (errno)); +} + +void lease_break (int sig,siginfo_t *info,void *p) +{ +if (debug >1 ) +fprintf (stderr,"lease break %d %p fd %d\n" , + sig, info, info->si_fd); + got_sigio =1 ; +release_lease (f_fd); +} + +struct sigaction lease_break_action = { + .sa_sigaction = lease_break, + .sa_flags =SA_SIGINFO , +}; + +int do_setup_sigio (int fd) +{ +int rc; + + got_sigio =0 ; + + rc =sigaction (SIGIO , &lease_break_action,NULL ); +if (rc !=0 ) +return FAIL ; + +if (debug >1 ) +fprintf (stderr,"Set '%s' sigaction on %d\n" , +strsignal (SIGIO ), fd); + + rc =fcntl (fd,F_SETSIG ,SIGIO ); +if (debug && rc) +fprintf (stderr,"%s Set '%s' sigaction on %d\n" , + __FILE__,strsignal (SIGIO ), fd); + +return (rc ==0 ?PASS :FAIL ); +} + +int do_wait_sigio (int32_t time) +{ +if (time <=0 ) +return FAIL ; + +while (!got_sigio && time--) { +sleep (1 ); + } + +if (debug >1 && !got_sigio) +fprintf (stderr,"%s failed to get sigio\n" , + __FILE__); + +return (got_sigio ?PASS :FAIL ); +}int do_open (int flag) {
@@ -790,10 +905,13 @@ void recv_ctl(void) {int nread; +again:if ((nread =SOCKET_READ (c_fd, (char *)&ctl,sizeof (ctl))) !=sizeof (ctl)) { -if (nread <0 ) +if (nread <0 ) { +if (errno ==EINTR ) + goto again;perror ("recv_ctl: read" ); -else { + }else {fprintf (stderr,"recv_ctl[%d]: read() returns %d, not %zu as expected\n" , ctl.test, nread,sizeof (ctl));fprintf (stderr,"socket might has been closed by other locktest\n" );
@@ -1081,6 +1199,12 @@ main(int argc, char *argv[])case CMD_GETLEASE : result =do_lease (F_GETLEASE , tests[index][ARG ], tests[index][ARG ]);break ; +case CMD_SIGIO : + result =do_setup_sigio (f_fd); +break ; +case CMD_WAIT_SIGIO : + result =do_wait_sigio (tests[index][TIME ]); +break ; }if ( result != tests[index][RESULT ]) { fail_flag++;
@@ -1189,6 +1313,12 @@ main(int argc, char *argv[])case CMD_GETLEASE : result =do_lease (F_GETLEASE , ctl.offset, ctl.offset);break ; +case CMD_SIGIO : + result =do_setup_sigio (f_fd); +break ; +case CMD_WAIT_SIGIO : + result =do_wait_sigio (ctl.offset); +break ; }if ( result != ctl.result ) {if (debug)
Signature · 1 line
2.20.1
PATCH 11/13 src/locktest: Add truncate lease tests
In reply to [email protected]From: Ira Weiny <[email protected]>
Add verification of signal reception on truncate:
/* 41 */"Write lease gets SIGIO on truncate", /* 42 */"Read lease gets SIGIO on truncate",
--- src/locktest.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)
src/locktest.c +50 -0
@@ -102,6 +102,7 @@ static HANDLE f_fd = INVALID_HANDLE; /* shared file */#define CMD_GETLEASE 8#define CMD_SIGIO 9#define CMD_WAIT_SIGIO 10 +#define CMD_TRUNCATE 11#define PASS 1#define FAIL 0
@@ -133,6 +134,7 @@ static char *get_cmd_str(int cmd)case CMD_GETLEASE :return "Get Lease" ;break ;case CMD_SIGIO :return "Setup SIGIO" ;break ;case CMD_WAIT_SIGIO :return "Wait for SIGIO" ;break ; +case CMD_TRUNCATE :return "Truncate" ;break ; }return "unknown" ; }
@@ -203,6 +205,8 @@ char *descriptions[] = {/* 38 */ "Write lease gets SIGIO on read open" ,/* 39 */ "Read lease does _not_ get SIGIO on read open" ,/* 40 */ "Read lease gets SIGIO on write open" , +/* 41 */ "Write lease gets SIGIO on truncate" , + /* 42 */"Read lease gets SIGIO on truncate", }; static int64_t tests[][6] =
@@ -640,6 +644,25 @@ static int64_t tests[][6] = {40, CMD_CLOSE, 0, 0, PASS, SERVER }, {40, CMD_CLOSE, 0, 0, PASS, CLIENT }, +/* Get SIGIO when Write lease is broken by Truncate */ + {41, CMD_OPEN, O_RDWR, 0, PASS, CLIENT }, + {41, CMD_SETLEASE, F_WRLCK, 0, PASS, CLIENT }, + {41, CMD_GETLEASE, F_WRLCK, 0, PASS, CLIENT }, + {41, CMD_SIGIO, 0, 0, PASS, CLIENT }, + {41, CMD_TRUNCATE, FILE_SIZE/2, 0, PASS, CLIENT }, + {41, CMD_WAIT_SIGIO, 5, 0, PASS, CLIENT }, + {41, CMD_CLOSE, 0, 0, PASS, CLIENT }, + +/* Get SIGIO when Read lease is broken by Truncate */ + {42, CMD_OPEN, O_RDONLY, 0, PASS, CLIENT }, + {42, CMD_SETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {42, CMD_GETLEASE, F_RDLCK, 0, PASS, CLIENT }, + {42, CMD_SIGIO, 0, 0, PASS, CLIENT }, + {42, CMD_TRUNCATE, FILE_SIZE/2, 0, PASS, SERVER }, + {42, CMD_WAIT_SIGIO, 5, 0, PASS, CLIENT }, + {42, CMD_CLOSE, 0, 0, PASS, CLIENT }, + +/* indicate end of array */ {0,0,0,0,0,SERVER}, {0,0,0,0,0,CLIENT}
@@ -703,6 +726,27 @@ initialize(HANDLE fd) } } +static int do_truncate (size_t length) +{ +int rc; + +if (debug >1 ) +fprintf (stderr,"truncating to %ld\n" , length); + +again: + rc =truncate (filename, length); +if (rc && errno ==EINTR ) + goto again; + + saved_errno = errno; + +if (debug && rc) +fprintf (stderr,"%s %d : %s\n" , + __FILE__, errno,strerror (errno)); + +return (rc ==0 ?PASS :FAIL ); +} +void release_lease (int fd) {int rc;
@@ -1205,6 +1249,9 @@ main(int argc, char *argv[])case CMD_WAIT_SIGIO : result =do_wait_sigio (tests[index][TIME ]);break ; +case CMD_TRUNCATE : + result =do_truncate (tests[index][OFFSET ]); +break ; }if ( result != tests[index][RESULT ]) { fail_flag++;
@@ -1319,6 +1366,9 @@ main(int argc, char *argv[])case CMD_WAIT_SIGIO : result =do_wait_sigio (ctl.offset);break ; +case CMD_TRUNCATE : + result =do_truncate (ctl.offset); +break ; }if ( result != ctl.result ) {if (debug)
Signature · 1 line
2.20.1
PATCH 12/13 src/locktest: Clean up error output
In reply to [email protected]From: Ira Weiny <[email protected]>
Add some debugging
Make sure all errors go to stderr
Clean up formatting and make failures stand out Report test results for the client not just the server
--- src/locktest.c | 45 ++++++++++++++++++++++----------------------- 1 file changed, 22 insertions(+), 23 deletions(-)
src/locktest.c +22 -23
@@ -1057,6 +1057,8 @@ main(int argc, char *argv[]) } filename=argv[optind]; +if (debug) +fprintf (stderr,"Working on file : %s\n" , filename);if (do_open (O_RDWR ) ==FAIL )exit (1 );
@@ -1135,10 +1137,10 @@ main(int argc, char *argv[])struct hostent *servInfo;if ((servInfo =gethostbyname (host)) ==NULL ) { -printf ("Couldn't get hostbyname for %s" , host); +fprintf (stderr,"Couldn't get hostbyname for %s" , host);if (h_errno ==HOST_NOT_FOUND ) -printf (": host not found" ); -printf ("\n" ); +fprintf (stderr,": host not found" ); +fprintf (stderr,"\n" );exit (1 );/*NOTREACHED*/ }
@@ -1256,16 +1258,14 @@ main(int argc, char *argv[])if ( result != tests[index][RESULT ]) { fail_flag++;/* We have a failure */ -if (debug) -fprintf (stderr,"Server failure in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , - ctl.test, -get_cmd_str (tests[index][COMMAND ]), - (long long )tests[index][OFFSET ], - (long long )tests[index][LENGTH ], - saved_errno,strerror (saved_errno)); -fprintf (stderr,"Server failure in %lld:%s\n" , - (long long )tests[index][TEST_NUM ], - descriptions[tests[index][TEST_NUM ] -1 ]); +fprintf (stderr," ***** Server failure *****\n" ); +fprintf (stderr," in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , + ctl.test,get_cmd_str (tests[index][COMMAND ]), + (long long )tests[index][OFFSET ], + (long long )tests[index][LENGTH ], + saved_errno,strerror (saved_errno)); +fprintf (stderr," %d:%s\n" , + ctl.test, descriptions[ctl.test -1 ]); } }/* else send it off to the client */
@@ -1292,14 +1292,13 @@ main(int argc, char *argv[])* not what the command returned */ if ( ctl.result ==FAIL ) { fail_flag++; -if (debug) -fprintf (stderr,"Client failure in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , +fprintf (stderr," ***** Client failure *****\n" ); +fprintf (stderr," in test %d, while %sing using offset %lld, length %lld - err = %d:%s\n" , ctl.test,get_cmd_str (ctl.command), (long long )ctl.offset, (long long )ctl.length, ctl.error,strerror (ctl.error)); -fprintf (stderr,"Client failure in %lld:%s\n" , - (long long )tests[index][TEST_NUM ], - descriptions[tests[index][TEST_NUM ] -1 ]); +fprintf (stderr," %d:%s\n" , + ctl.test, descriptions[ctl.test -1 ]); } } }
@@ -1371,9 +1370,10 @@ main(int argc, char *argv[])break ; }if ( result != ctl.result ) { -if (debug) -fprintf (stderr,"Got %d, wanted %d\n" , - result, ctl.result); +fprintf (stderr,"Failure in %d:%s\n" , + ctl.test, descriptions[ctl.test -1 ]); +fprintf (stderr," Got %d, wanted %d\n" , + result, ctl.result); ctl.result =FAIL ; ctl.error = saved_errno; fail_count++;
@@ -1391,8 +1391,7 @@ main(int argc, char *argv[]) } } } -if (server) -printf ("%d tests run, %d failed\n" , test_count, fail_count); +fprintf (stderr,"%d tests run, %d failed\n" , test_count, fail_count); }exit (fail_count);
Signature · 1 line
2.20.1
PATCH 13/13 src/locktest: Audit all debug output
In reply to [email protected]From: Ira Weiny <[email protected]>
Audit all the debug output to be more clear on what failed.
Remove the debug flag from around prints for system call errors and remove the debug flag from the script. This helps to indicate what happened when an individual test step fails.
Also, clean up the debug output to be a single level of test infrastructure prints.
--- src/locktest.c | 42 ++++++++++++++++++++++++------------------ tests/generic/131 | 5 ++--- 2 files changed, 26 insertions(+), 21 deletions(-)
src/locktest.c +24 -18
@@ -730,7 +730,7 @@ static int do_truncate(size_t length) {int rc; -if (debug >1 ) +if (debug)fprintf (stderr,"truncating to %ld\n" , length); again:
@@ -740,7 +740,7 @@ again: saved_errno = errno; -if (debug && rc) +if (rc)fprintf (stderr,"%s %d : %s\n" , __FILE__, errno,strerror (errno));
@@ -752,14 +752,14 @@ void release_lease(int fd)int rc; rc =fcntl (fd,F_SETLEASE ,F_UNLCK ); -if (debug && rc !=0 ) +if (rc !=0 )fprintf (stderr,"%s Failed to remove lease %d : %d %s\n" , __FILE__, rc, errno,strerror (errno)); }void lease_break (int sig,siginfo_t *info,void *p) { -if (debug >1 ) +if (debug)fprintf (stderr,"lease break %d %p fd %d\n" , sig, info, info->si_fd); got_sigio =1 ;
@@ -778,17 +778,20 @@ int do_setup_sigio(int fd) got_sigio =0 ; rc =sigaction (SIGIO , &lease_break_action,NULL ); -if (rc !=0 ) +if (rc !=0 ) { +fprintf (stderr,"%s Set '%s' sigaction failed %d\n" , + __FILE__,strsignal (SIGIO ), rc);return FAIL ; + } -if (debug >1 ) +if (debug)fprintf (stderr,"Set '%s' sigaction on %d\n" ,strsignal (SIGIO ), fd); rc =fcntl (fd,F_SETSIG ,SIGIO ); -if (debug && rc) -fprintf (stderr,"%s Set '%s' sigaction on %d\n" , - __FILE__,strsignal (SIGIO ), fd); +if (rc) +fprintf (stderr,"%s Set '%s' sigaction failed %d\n" , + __FILE__,strsignal (SIGIO ), rc);return (rc ==0 ?PASS :FAIL ); }
@@ -848,7 +851,7 @@ static int do_lock(int cmd, int type, int start, int length) ret =fcntl (filedes, cmd, &fl); saved_errno = errno; -if (debug >1 && ret) +if (ret)fprintf (stderr,"do_lock: ret = %d, errno = %d (%s)\n" , ret, errno,strerror (errno));return (ret==0 ?PASS :FAIL );
@@ -873,7 +876,7 @@ static int do_lease(int cmd, int arg, int expected)if (expected && (expected == ret)) ret =0 ; -if (debug >1 && ret) +if (ret)fprintf (stderr,"%s do_lease: ret = %d, errno = %d (%s)\n" , __FILE__, ret, errno,strerror (errno));
@@ -892,8 +895,11 @@ int do_close(void) saved_errno = errno; -if (errno) +if (errno) { +fprintf (stderr,"%s errno = %d (%s)\n" , + __FILE__, errno,strerror (errno));return FAIL ; + }return PASS ; }
@@ -913,7 +919,7 @@ send_ctl(void) {int nwrite; -if (debug >1 ) { +if (debug) {fprintf (stderr,"send_ctl: test=%d, command=%d offset=%" LL "d, length=%" LL "d, result=%d, error=%d\n" , ctl.test, ctl.command, (long long )ctl.offset, (long long )ctl.length,ctl.result, ctl.error); }
@@ -971,7 +977,7 @@ again: ctl.index=bswap_uint32 (ctl.index); ctl.error=bswap_uint32 (ctl.error); -if (debug >1 ) { +if (debug) {fprintf (stderr,"recv_ctl: test=%d, command=%d offset=%" LL "d, length=%" LL "d, result=%d, error=%d\n" , ctl.test, ctl.command, (long long )ctl.offset, (long long )ctl.length, ctl.result, ctl.error); }
@@ -1207,7 +1213,7 @@ main(int argc, char *argv[]) }/* If we have a server command, deal with it */ if (tests[index][WHO ] ==SERVER ) { -if (debug>1 ) +if (debug)fprintf (stderr,"Got a server command (%d)\n" , index);if (tests[index][TEST_NUM ] ==0 ) { index++;
@@ -1276,7 +1282,7 @@ main(int argc, char *argv[]) }/* get the client to do something */ init_ctl (index); -if (debug >1 ) +if (debug) fprintf(stderr, "Sending command to client (%d) - %s - %lld:%lld\n", index, get_cmd_str(ctl.command),
@@ -1313,7 +1319,7 @@ main(int argc, char *argv[]) index++; }else {/* CLIENT */ -if (debug >2 ) +if (debug)fprintf (stderr,"client: waiting...\n" );/* wait for the server to do something */ recv_ctl ();
@@ -1381,7 +1387,7 @@ main(int argc, char *argv[]) ctl.result =PASS ; ctl.error =0 ; } -if (debug >2 ) +if (debug)fprintf (stderr,"client: sending result to server (%d)\n" , ctl.index);/* Send result to the server */ send_ctl ();
tests/generic/131 +2 -3
@@ -14,7 +14,6 @@ here=`pwd` tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 -debug="-d" TESTFILE=$TEST_DIR/lock_file
@@ -63,7 +62,7 @@ function dump_logs_fail() } # Start the server -src/locktest $debug $TESTFILE 2> $SERVER_LOG 1> $SERVER_PORT & +src/locktest $TESTFILE 2> $SERVER_LOG 1> $SERVER_PORT & server_pid=$! timeout=30
@@ -89,7 +88,7 @@ fi # Start the client -src/locktest $debug -p $PORT -h localhost $TESTFILE 2> $CLIENT_LOG +src/locktest -p $PORT -h localhost $TESTFILE 2> $CLIENT_LOG client_result=$? client_pid=$! if [ $client_result -ne 0 ]; then
Signature · 1 line
2.20.1
Quoted 30 lines · On Tue, 2019-09-17 at 21:15 -0700, [email protected] wrote:
From: Ira Weiny <[email protected]>
Rather than have a separate lease test, combine the previously proposed lease tests[1] directly to locktest because they share so much code.
To make things cleaner update the lock test code and test script. This includes fixing a rather serious bug.
Finally update the error output to help identify any steps which fail during testing.
Ira
[1] https://www.spinics.net/lists/fstests/msg12467.html
Ira Weiny (13):
src/locktest: Remove unnecessary sleep src/locktest: Remove OPEN macro
src/locktest: Change command macro names src/locktest: Addget_cmd_str
src/locktest.c: Clean up client command passingsrc/locktest.c: Fix return code if last test fails generic/131: Clean up pid variables
generic/131: Save stderr for debugging src/locktest: Add simple lease testing src/locktest: Add lease testing for basic signal reception src/locktest: Add truncate lease tests src/locktest: Clean up error output src/locktest: Audit all debug output
Quoted 4 lines
src/locktest.c | 957 ++++++++++++++++++++++++++++++---------------- tests/generic/131 | 72 ++-- 2 files changed, 666 insertions(+), 363 deletions(-)
Nice work, Ira. This all looks like good cleanup (and at least one important bugfix).
Quoted 4 lines · On Tue, Sep 17, 2019 at 09:15:45PM -0700, [email protected] wrote:
From: Ira Weiny <[email protected]>
Rather than have a separate lease test, combine the previously proposed lease tests[1] directly to locktest because they share so much code.
Firstly, thanks for the revised version!
Then, I'm so sorry if I didn't explain clearly in previous review, we do need a separate lease test, e.g. a new generic/568 test, and don't want locktest.c to test both lock and lease in the same generic/131 case. But reuse & extend the src/locktest.c to test lease as well, and call src/locktest in the new generic/568 case.
e.g. introduce two test arrays, one for lock test and one for lease test, and add new commandline switch to src/locktest.c and use the correct test array according to the given commandline option.
Quoted 11 lines
To make things cleaner update the lock test code and test script. This includes fixing a rather serious bug.
Finally update the error output to help identify any steps which fail during testing.
Ira
Quoted 9 lines
Ira Weiny (13):
src/locktest: Remove unnecessary sleep src/locktest: Remove OPEN macro src/locktest: Change command macro names src/locktest: Addget_cmd_strsrc/locktest.c: Clean up client command passingsrc/locktest.c: Fix return code if last test fails generic/131: Clean up pid variables generic/131: Save stderr for debugging
Looks like above cleanups and bugfixes can be merged independently, but I'm not sure if you need to update them as well when introducing new test array and new test case, so I leave them unmerged for now.
Thanks!
Eryu
Quoted 13 lines
src/locktest: Add simple lease testing src/locktest: Add lease testing for basic signal reception src/locktest: Add truncate lease tests src/locktest: Clean up error output src/locktest: Audit all debug output
src/locktest.c | 957 ++++++++++++++++++++++++++++++---------------- tests/generic/131 | 72 ++-- 2 files changed, 666 insertions(+), 363 deletions(-)Signature · 1 line
2.20.1
Quoted 7 lines · On Tue, Sep 17, 2019 at 09:15:45PM -0700, [email protected] wrote:
Quoted 4 lines
From: Ira Weiny <[email protected]>
Rather than have a separate lease test, combine the previously proposed lease tests[1] directly to locktest because they share so much
code.
Quoted 7 lines
Firstly, thanks for the revised version!
Then, I'm so sorry if I didn't explain clearly in previous review, we do need a separate lease test, e.g. a new generic/568 test, and don't want
locktest.cto test both lock and lease in the same generic/131 case.
But reuse & extend thesrc/locktest.cto test lease as well, and call src/locktest in the new generic/568 case.
I can do that. IMO, this work was needed regardless.
Quoted 4 lines
e.g. introduce two test arrays, one for lock test and one for lease test, and add new commandline switch to
src/locktest.cand use the correct test array according to the given commandline option.
Sure I can do that without too much trouble.
Just to be clear are you ok with overloading the fields such that the test array format is the same? That will be easiest.
Quoted 22 lines
Quoted 12 lines
To make things cleaner update the lock test code and test script. This includes fixing a rather serious bug.
Finally update the error output to help identify any steps which fail during testing.
Ira
Quoted 9 lines
Ira Weiny (13):
src/locktest: Remove unnecessary sleep src/locktest: Remove OPEN macro src/locktest: Change command macro names src/locktest: Addget_cmd_strsrc/locktest.c: Clean up client command passingsrc/locktest.c: Fix return code if last test fails generic/131: Clean up pid variables generic/131: Save stderr for debugging
Quoted 3 lines
Looks like above cleanups and bugfixes can be merged independently, but I'm not sure if you need to update them as well when introducing new test array and new test case, so I leave them unmerged for now.
I don't think I will need to modify these per se. I'd probably introduce the mechanics as part of the first test below to add the basic testing. But it does not matter much. Feel free to merge them if you want.
Ira
Quoted 18 lines
Thanks!
Eryu
Quoted 13 lines
src/locktest: Add simple lease testing src/locktest: Add lease testing for basic signal reception src/locktest: Add truncate lease tests src/locktest: Clean up error output src/locktest: Audit all debug output
src/locktest.c | 957 ++++++++++++++++++++++++++++++---------------- tests/generic/131 | 72 ++-- 2 files changed, 666 insertions(+), 363 deletions(-)--
2.20.1
Quoted 18 lines · Ira
Quoted 7 lines · On Tue, Sep 17, 2019 at 09:15:45PM -0700, [email protected] wrote:
Quoted 4 lines
From: Ira Weiny <[email protected]>
Rather than have a separate lease test, combine the previously proposed lease tests[1] directly to locktest because they share so much
code.
Quoted 7 lines
Firstly, thanks for the revised version!
Then, I'm so sorry if I didn't explain clearly in previous review, we do need a separate lease test, e.g. a new generic/568 test, and don't want
locktest.cto test both lock and lease in the same generic/131 case.
But reuse & extend thesrc/locktest.cto test lease as well, and call src/locktest in the new generic/568 case.I can do that. IMO, this work was needed regardless.
Quoted 1 line
Quoted 7 lines
Quoted 3 lines
e.g. introduce two test arrays, one for lock test and one for lease test, and add new commandline switch to
src/locktest.cand use the correct test array according to the given commandline option.Sure I can do that without too much trouble.
Just to be clear are you ok with overloading the fields such that the test array format is the same? That will be easiest.
Yeah, I'm fine with that. Thanks!
Eryu