ARM: dts: aspeed-g6 lpc, rainier
Subsystems (6)
v4 cover ARM: dts: aspeed-g6 lpc, rainier
Quoted 5 lines
This is a quick attempt at wiring up some of the LPC bits on the AST2600, and then using it on a new board, Rainier, a new POWER system with an AST2600. The only verification performed was ensuring the kernel still booted and the ibt device probed using the Rainier device tree atop the ast2600-evb qemu model. Please review.
Changes since v3:
- commit message updates
- align rainier reserved memory
- reviews, acks
Changes since v2:
- split lpc, ipmi binding updates into separate patches
- split soc, ipmi, reset compatibles into separate patches
- moved sio_regs to separate G6 dtsi patch
- moved i2c and mac additions from rainier DT to separate patches
Changes since v1:
- split DT binding docs and driver changes into separate patches.
- reordered rainier DT elements (alphabetized).
- added rainier rtc, lpc-ctl, reserved memory, mac devices
Brad Bishop (10):
dt-bindings: aspeed-lpc: Add G6 compatible strings
dt-bindings: ipmi: Add aspeed-g6 compatible strings
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
ARM: dts: aspeed-g6: Add lpc devices
ARM: dts: aspeed: Add Rainier system
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
ARM: dts: aspeed: rainier: Add mac devices
ARM: dts: aspeed: rainier: Add i2c devices
.../bindings/ipmi/aspeed,ast2400-ibt-bmc.txt | 3 +- .../bindings/ipmi/aspeed-kcs-bmc.txt | 7 +- .../devicetree/bindings/mfd/aspeed-lpc.txt | 8 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 464 ++++++++++++++++++ arch/arm/boot/dts/aspeed-g6.dtsi | 91 ++++ drivers/char/ipmi/bt-bmc.c | 1 + drivers/char/ipmi/kcs_bmc_aspeed.c | 1 + drivers/reset/reset-simple.c | 1 + drivers/soc/aspeed/aspeed-lpc-ctrl.c | 1 + drivers/soc/aspeed/aspeed-lpc-snoop.c | 2 + 11 files changed, 575 insertions(+), 5 deletions(-) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
Signature · 1 line
2.21.0
PATCH v4 1/10 dt-bindings: aspeed-lpc: Add G6 compatible strings
The AST2600 datasheet indicates the same register set behind the LPC controller address space.
---
v4: fix commit message
v3: move ipmi binding updates to a separate patch
v2: new for v2
--- Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +7 -1
@@ -46,6 +46,7 @@ Required properties - compatible: One of: "aspeed,ast2400-lpc", "simple-mfd" "aspeed,ast2500-lpc", "simple-mfd" + "aspeed,ast2600-lpc", "simple-mfd" - reg: contains the physical address and length values of the Aspeed LPC memory region.
@@ -64,6 +65,7 @@ BMC Node - compatible: One of: "aspeed,ast2400-lpc-bmc" "aspeed,ast2500-lpc-bmc" + "aspeed,ast2600-lpc-bmc" - reg: contains the physical address and length values of the H8S/2168-compatible LPC controller memory region
@@ -74,6 +76,7 @@ Host Node - compatible: One of: "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" + "aspeed,ast2600-lpc-host", "simple-mfd", "syscon" - reg: contains the address and length values of the host-related register space for the Aspeed LPC controller
@@ -128,6 +131,7 @@ Required properties: - compatible: One of: "aspeed,ast2400-lpc-ctrl"; "aspeed,ast2500-lpc-ctrl"; + "aspeed,ast2600-lpc-ctrl"; - reg: contains offset/length values of the host interface controller memory regions
@@ -168,6 +172,7 @@ Required properties: - compatible: One of: "aspeed,ast2400-lhc"; "aspeed,ast2500-lhc"; + "aspeed,ast2600-lhc"; - reg: contains offset/length values of the LHC memory regions. In the AST2400 and AST2500 there are two regions.
@@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose to modify this configuration. Required properties: - - compatible: "aspeed,ast2500-lpc-reset" or + - compatible: "aspeed,ast2600-lpc-reset" or + "aspeed,ast2500-lpc-reset" "aspeed,ast2400-lpc-reset" - reg: offset and length of the IP in the LHC memory region - #reset-controller indicates the number of reset cells expected
Signature · 1 line
2.21.0
Re: [PATCH v4 linuux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings
Quoted 4 lines · Brad Bishop
The AST2600 datasheet indicates the same register set behind the LPC controller address space.
Signed-off-by Brad Bishop <[email protected]>
Quoted 67 lines
---
v4: fix commit message
v3: move ipmi binding updates to a separate patch
v2: new for v2--- Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +5
-0@@ -46,6 +46,7 @@ Required properties - compatible: One of: "aspeed,ast2400-lpc", "simple-mfd" "aspeed,ast2500-lpc", "simple-mfd" + "aspeed,ast2600-lpc", "simple-mfd" - reg: contains the physical address and length values of the Aspeed LPC memory region.@@ -64,6 +65,7 @@ BMC Node - compatible: One of: "aspeed,ast2400-lpc-bmc" "aspeed,ast2500-lpc-bmc" + "aspeed,ast2600-lpc-bmc" - reg: contains the physical address and length values of the H8S/2168-compatible LPC controller memory region@@ -74,6 +76,7 @@ Host Node - compatible: One of: "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" + "aspeed,ast2600-lpc-host", "simple-mfd", "syscon" - reg: contains the address and length values of the host-related register space for the Aspeed LPC controller@@ -128,6 +131,7 @@ Required properties: - compatible: One of: "aspeed,ast2400-lpc-ctrl"; "aspeed,ast2500-lpc-ctrl"; + "aspeed,ast2600-lpc-ctrl"; - reg: contains offset/length values of the host interface controller memory regions@@ -168,6 +172,7 @@ Required properties: - compatible: One of: "aspeed,ast2400-lhc"; "aspeed,ast2500-lhc"; + "aspeed,ast2600-lhc"; - reg: contains offset/length values of the LHC memory regions. In the AST2400 and AST2500 there are two regions.@@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose tomodify this configuration.
Required properties:
- - compatible: "aspeed,ast2500-lpc-reset" or
+ - compatible: "aspeed,ast2600-lpc-reset" orDocumentation/devicetree/bindings/mfd/aspeed-lpc.txt +1
-0+ "aspeed,ast2500-lpc-reset" "aspeed,ast2400-lpc-reset" - reg: offset and length of the IP in the LHC memory region - #reset-controller indicates the number of reset cells expectedSignature · 1 line
2.21.0
PATCH v4 2/10 dt-bindings: ipmi: Add aspeed-g6 compatible strings
In reply to Brad BishopThe AST2600 SoC contains the same IPMI devices (KCS and BT) as the AST2500.
---
v4: add Andrew's review
v3: new for v3
--- .../devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt | 3 ++- Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt | 7 ++++--- 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt +2 -1
@@ -1,6 +1,6 @@ * Aspeed BT (Block Transfer) IPMI interface -The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs +The Aspeed SOCs (AST2400, AST2500 and AST2600) are commonly used as BMCs (BaseBoard Management Controllers) and the BT interface can be used to perform in-band IPMI communication with their host.
@@ -9,6 +9,7 @@ Required properties: - compatible : should be one of "aspeed,ast2400-ibt-bmc" "aspeed,ast2500-ibt-bmc" + "aspeed,ast2600-ibt-bmc" - reg: physical address and size of the registers Optional properties:
Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt +4 -3
@@ -1,13 +1,14 @@ * Aspeed KCS (Keyboard Controller Style) IPMI interface -The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs -(Baseboard Management Controllers) and the KCS interface can be -used to perform in-band IPMI communication with their host. +The Aspeed SOCs (AST2400, AST2500 and AST200) are commonly used as BMCs +(Baseboard Management Controllers) and the KCS interface can be used to +perform in-band IPMI communication with their host. Required properties: - compatible : should be one of "aspeed,ast2400-kcs-bmc" "aspeed,ast2500-kcs-bmc" + "aspeed,ast2600-kcs-bmc" - interrupts : interrupt generated by the controller - kcs_chan : The LPC channel number in the controller - kcs_addr : The host CPU IO map address
Signature · 1 line
2.21.0
PATCH v4 3/10 soc: aspeed: lpc: Add G6 compatible strings
In reply to Brad BishopThe AST2600(G6) has the same lpc-ctrl and lpc-snoop devices as the AST2500.
---
v4:
- no changes
v3:
- move ipmi, reset to a separate patch
v2:
- removed DT binding documentation changes
--- drivers/soc/aspeed/aspeed-lpc-ctrl.c | 1 + drivers/soc/aspeed/aspeed-lpc-snoop.c | 2 ++ 2 files changed, 3 insertions(+)
drivers/soc/aspeed/aspeed-lpc-ctrl.c +1 -0
@@ -291,6 +291,7 @@ static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)static const struct of_device_id aspeed_lpc_ctrl_match[] = { { .compatible ="aspeed,ast2400-lpc-ctrl" }, { .compatible ="aspeed,ast2500-lpc-ctrl" }, + { .compatible ="aspeed,ast2600-lpc-ctrl" }, { }, };
drivers/soc/aspeed/aspeed-lpc-snoop.c +2 -0
@@ -325,6 +325,8 @@ static const struct of_device_id aspeed_lpc_snoop_match[] = { .data = &ast2400_model_data }, { .compatible = "aspeed,ast2500-lpc-snoop", .data = &ast2500_model_data }, + { .compatible = "aspeed,ast2600-lpc-snoop", + .data = &ast2500_model_data }, { }, };
Signature · 1 line
2.21.0
Re: [PATCH v4 linuux dev-5.3 03/10] soc: aspeed: lpc: Add G6 compatible strings
Quoted 4 lines · Brad Bishop
The AST2600(G6) has the same lpc-ctrl and lpc-snoop devices as the AST2500.
Signed-off-by Brad Bishop <[email protected]>
Probably should be separate patches for upstream, but I'm not fussed for the moment.
PATCH v4 4/10 ipmi: aspeed-g6: Add compatible strings
In reply to Brad BishopThe AST2600 SoC contains the same IPMI (BT/KCS) devices as the AST2500.
---
v4: add Andrew's review
v3: new for v3
--- drivers/char/ipmi/bt-bmc.c | 1 + drivers/char/ipmi/kcs_bmc_aspeed.c | 1 + 2 files changed, 2 insertions(+)
drivers/char/ipmi/bt-bmc.c +1 -0
@@ -513,6 +513,7 @@ static int bt_bmc_remove(struct platform_device *pdev)static const struct of_device_id bt_bmc_match[] = { { .compatible ="aspeed,ast2400-ibt-bmc" }, { .compatible ="aspeed,ast2500-ibt-bmc" }, + { .compatible ="aspeed,ast2600-ibt-bmc" }, { }, };
drivers/char/ipmi/kcs_bmc_aspeed.c +1 -0
@@ -301,6 +301,7 @@ static int aspeed_kcs_remove(struct platform_device *pdev)static const struct of_device_id ast_kcs_bmc_match[] = { { .compatible ="aspeed,ast2400-kcs-bmc" }, { .compatible ="aspeed,ast2500-kcs-bmc" }, + { .compatible ="aspeed,ast2600-kcs-bmc" }, { } };MODULE_DEVICE_TABLE (of, ast_kcs_bmc_match);
Signature · 1 line
2.21.0
PATCH v4 5/10 reset: simple: Add AST2600 compatibility string
In reply to Brad BishopThe AST2600 SoC contains the same LPC register set as the AST2500.
---
v4: add Andrew's review
v3: new for v3
--- drivers/reset/reset-simple.c | 1 + 1 file changed, 1 insertion(+)
drivers/reset/reset-simple.c +1 -0
@@ -125,6 +125,7 @@ static const struct of_device_id reset_simple_dt_ids[] = { .data = &reset_simple_active_low }, { .compatible = "aspeed,ast2400-lpc-reset" }, { .compatible = "aspeed,ast2500-lpc-reset" }, + { .compatible = "aspeed,ast2600-lpc-reset" }, { .compatible = "bitmain,bm1880-reset", .data = &reset_simple_active_low }, { /* sentinel */ },
Signature · 1 line
2.21.0
PATCH v4 6/10 ARM: dts: aspeed-g6: Add lpc devices
In reply to Brad BishopEverything is the same as G5, except the devices have their own interrupt now.
---
v2: new for v2
v3: fixed broken ipmi/lpc interrupts
v4: add Andrew's ack
--- arch/arm/boot/dts/aspeed-g6.dtsi | 87 ++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+)
arch/arm/boot/dts/aspeed-g6.dtsi +87 -0
@@ -249,6 +249,93 @@ status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; + reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <3>; + status = "disabled"; + }; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + kcs4: kcs4@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <4>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lhc: lhc@20 { + compatible = "aspeed,ast2600-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + sdc: sdc@1e740000 { compatible = "aspeed,ast2600-sd-controller"; reg = <0x1e740000 0x100>;
Signature · 1 line
2.21.0
PATCH v4 7/10 ARM: dts: aspeed: Add Rainier system
In reply to Brad BishopRainier is a new IBM server with POWER host processors and an AST2600 BMC.
---
v4:
- align reserved memory region
v3:
- removed i2c, mac
- moved reserved memory
- set correct memory size
v2:
- reordered rainier DT elements (alphabetized).
- added rainier rtc, lpc-ctl, reserved memory, mac devices
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 57 ++++++++++++++++++++ 2 files changed, 58 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1278,6 +1278,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ aspeed-bmc-facebook-yamp.dtb \ + aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts new file +57 -0
57 lines not on this page · raw message
Signature · 1 line
2.21.0
Re: [PATCH v4 linuux dev-5.3 07/10] ARM: dts: aspeed: Add Rainier system
Quoted 4 lines · Brad Bishop
Rainier is a new IBM server with POWER host processors and an AST2600 BMC.
Signed-off-by Brad Bishop <[email protected]>
PATCH v4 8/10 ARM: dts: aspeed-g6: Expose SuperIO scratch registers
In reply to Brad Bishop---
v4: add Andrew's ack
v3: new for v3
--- arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/aspeed-g6.dtsi +4 -0
@@ -333,6 +333,10 @@ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + sio_regs: regs { + compatible = "aspeed,bmc-misc"; + }; }; };
Signature · 1 line
2.21.0
PATCH v4 9/10 ARM: dts: aspeed: rainier: Add mac devices
In reply to Brad BishopRainier contains two network devices.
---
v4: add Andrew's review
v3: new for v3
--- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +14 -0
@@ -55,3 +55,17 @@ status = "okay"; memory-region = <&flash_memory>; }; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; +};
Signature · 1 line
2.21.0
PATCH v4 10/10 ARM: dts: aspeed: rainier: Add i2c devices
In reply to Brad Bishop---
v4: add Andrew's ack
v3: new for v3
--- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 393 +++++++++++++++++++ 1 file changed, 393 insertions(+)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +393 -0
@@ -51,6 +51,399 @@ status = "okay"; }; +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps2"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps2"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps2"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps2"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; +}; + +&i2c7 { + status = "okay"; + + si7021-a20@20 { + compatible = "silabs,si7020"; + reg = <0x20>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@b { + compatible = "ti,ucd90160"; + reg = <0x0b>; + }; + + ucd90320@c { + compatible = "ti,ucd90160"; + reg = <0x0c>; + }; + + ucd90320@11 { + compatible = "ti,ucd90160"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c9 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; +}; + +&i2c10 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + &lpc_ctrl { status = "okay"; memory-region = <&flash_memory>;
Signature · 1 line
2.21.0
Hi Brad,
Will this series of patches submit to upstream?
Thanks,
Troy Lee
--
Yu-Ting Lee (Troy Lee) <[email protected]>
Quoted 51 lines · Brad Bishop
Quoted 6 lines
This is a quick attempt at wiring up some of the LPC bits on the AST2600, and then using it on a new board, Rainier, a new POWER system with an AST2600. The only verification performed was ensuring the kernel still booted and the ibt device probed using the Rainier device tree atop the ast2600-evb qemu model. Please review.
Changes since v3:
- commit message updates
- align rainier reserved memory
- reviews, acksChanges since v2:
- split lpc, ipmi binding updates into separate patches
- split soc, ipmi, reset compatibles into separate patches
- movedsio_regsto separate G6 dtsi patch
- moved i2c and mac additions from rainier DT to separate patchesChanges since v1:
- split DT binding docs and driver changes into separate patches.
- reordered rainier DT elements (alphabetized).
- added rainier rtc, lpc-ctl, reserved memory, mac devicesBrad Bishop (10):
dt-bindings: aspeed-lpc: Add G6 compatible strings
dt-bindings: ipmi: Add aspeed-g6 compatible strings
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
ARM: dts: aspeed-g6: Add lpc devices
ARM: dts: aspeed: Add Rainier system
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
ARM: dts: aspeed: rainier: Add mac devices
ARM: dts: aspeed: rainier: Add i2c devices.../bindings/ipmi/aspeed,ast2400-ibt-bmc.txt | 3 +- .../bindings/ipmi/aspeed-kcs-bmc.txt | 7 +- .../devicetree/bindings/mfd/aspeed-lpc.txt | 8 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 464 ++++++++++++++++++ arch/arm/boot/dts/aspeed-g6.dtsi | 91 ++++ drivers/char/ipmi/bt-bmc.c | 1 + drivers/char/ipmi/kcs_bmc_aspeed.c | 1 + drivers/reset/reset-simple.c | 1 + drivers/soc/aspeed/aspeed-lpc-ctrl.c | 1 + drivers/soc/aspeed/aspeed-lpc-snoop.c | 2 + 11 files changed, 575 insertions(+), 5 deletions(-) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts--
2.21.0