Skip to contentSkip to conversation

ARM: dts: aspeed-g6 lpc, rainier

PATCH In review Brad Bishop 3 participants 15 messages Sep 25, 2019 – Dec 10, 2020

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v4 cover ARM: dts: aspeed-g6 lpc, rainier

Quoted 5 lines

This is a quick attempt at wiring up some of the LPC bits on the AST2600, and then using it on a new board, Rainier, a new POWER system with an AST2600. The only verification performed was ensuring the kernel still booted and the ibt device probed using the Rainier device tree atop the ast2600-evb qemu model. Please review.

Changes since v3:
- commit message updates
- align rainier reserved memory
- reviews, acks

Changes since v2:
- split lpc, ipmi binding updates into separate patches
- split soc, ipmi, reset compatibles into separate patches
- moved sio_regs to separate G6 dtsi patch
- moved i2c and mac additions from rainier DT to separate patches

Changes since v1:
- split DT binding docs and driver changes into separate patches.
- reordered rainier DT elements (alphabetized).
- added rainier rtc, lpc-ctl, reserved memory, mac devices

Brad Bishop (10):
dt-bindings: aspeed-lpc: Add G6 compatible strings
dt-bindings: ipmi: Add aspeed-g6 compatible strings
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
ARM: dts: aspeed-g6: Add lpc devices
ARM: dts: aspeed: Add Rainier system
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
ARM: dts: aspeed: rainier: Add mac devices
ARM: dts: aspeed: rainier: Add i2c devices

 .../bindings/ipmi/aspeed,ast2400-ibt-bmc.txt  |   3 +-
 .../bindings/ipmi/aspeed-kcs-bmc.txt          |   7 +-
 .../devicetree/bindings/mfd/aspeed-lpc.txt    |   8 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts  | 464 ++++++++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi              |  91 ++++
 drivers/char/ipmi/bt-bmc.c                    |   1 +
 drivers/char/ipmi/kcs_bmc_aspeed.c            |   1 +
 drivers/reset/reset-simple.c                  |   1 +
 drivers/soc/aspeed/aspeed-lpc-ctrl.c          |   1 +
 drivers/soc/aspeed/aspeed-lpc-snoop.c         |   2 +
 11 files changed, 575 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
Signature · 1 line
2.21.0
#1 lore raw

PATCH v4 1/10 dt-bindings: aspeed-lpc: Add G6 compatible strings

The AST2600 datasheet indicates the same register set behind the LPC controller address space.

---
v4: fix commit message
v3: move ipmi binding updates to a separate patch
v2: new for v2

---
 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +7 -1
index 86446074e206..e1197bab57bb 100644
@@ -46,6 +46,7 @@ Required properties
 - compatible:	One of:
 		"aspeed,ast2400-lpc", "simple-mfd"
 		"aspeed,ast2500-lpc", "simple-mfd"
+		"aspeed,ast2600-lpc", "simple-mfd"
 
 - reg:		contains the physical address and length values of the Aspeed
                 LPC memory region.
@@ -64,6 +65,7 @@ BMC Node
 - compatible:	One of:
 		"aspeed,ast2400-lpc-bmc"
 		"aspeed,ast2500-lpc-bmc"
+		"aspeed,ast2600-lpc-bmc"
 
 - reg:		contains the physical address and length values of the
                 H8S/2168-compatible LPC controller memory region
@@ -74,6 +76,7 @@ Host Node
 - compatible:   One of:
 		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
 		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+		"aspeed,ast2600-lpc-host", "simple-mfd", "syscon"
 
 - reg:		contains the address and length values of the host-related
                 register space for the Aspeed LPC controller
@@ -128,6 +131,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lpc-ctrl";
 		"aspeed,ast2500-lpc-ctrl";
+		"aspeed,ast2600-lpc-ctrl";
 
 - reg:		contains offset/length values of the host interface controller
 		memory regions
@@ -168,6 +172,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lhc";
 		"aspeed,ast2500-lhc";
+		"aspeed,ast2600-lhc";
 
 - reg:		contains offset/length values of the LHC memory regions. In the
 		AST2400 and AST2500 there are two regions.
@@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose to modify this configuration.
 
 Required properties:
 
- - compatible:		"aspeed,ast2500-lpc-reset" or
+ - compatible:		"aspeed,ast2600-lpc-reset" or
+			"aspeed,ast2500-lpc-reset"
 			"aspeed,ast2400-lpc-reset"
  - reg:			offset and length of the IP in the LHC memory region
  - #reset-controller	indicates the number of reset cells expected
Signature · 1 line
2.21.0
Reviewed-by on v4 1/10
#2 lore raw

Re: [PATCH v4 linuux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings

Quoted 4 lines · Brad Bishop

The AST2600 datasheet indicates the same register set behind the LPC controller address space.

Quoted 67 lines

---
v4: fix commit message
v3: move ipmi binding updates to a separate patch
v2: new for v2

---
 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +5 -0
index 86446074e206..e1197bab57bb 100644
@@ -46,6 +46,7 @@ Required properties
 - compatible:	One of:
 		"aspeed,ast2400-lpc", "simple-mfd"
 		"aspeed,ast2500-lpc", "simple-mfd"
+		"aspeed,ast2600-lpc", "simple-mfd"
 
 - reg:		contains the physical address and length values of the Aspeed
                 LPC memory region.
@@ -64,6 +65,7 @@ BMC Node
 - compatible:	One of:
 		"aspeed,ast2400-lpc-bmc"
 		"aspeed,ast2500-lpc-bmc"
+		"aspeed,ast2600-lpc-bmc"
 
 - reg:		contains the physical address and length values of the
                 H8S/2168-compatible LPC controller memory region
@@ -74,6 +76,7 @@ Host Node
 - compatible:   One of:
 		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
 		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+		"aspeed,ast2600-lpc-host", "simple-mfd", "syscon"
 
 - reg:		contains the address and length values of the host-related
                 register space for the Aspeed LPC controller
@@ -128,6 +131,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lpc-ctrl";
 		"aspeed,ast2500-lpc-ctrl";
+		"aspeed,ast2600-lpc-ctrl";
 
 - reg:		contains offset/length values of the host interface controller
 		memory regions
@@ -168,6 +172,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lhc";
 		"aspeed,ast2500-lhc";
+		"aspeed,ast2600-lhc";
 
 - reg:		contains offset/length values of the LHC memory regions. In the
 		AST2400 and AST2500 there are two regions.
@@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose to 

modify this configuration.

Required properties:

- - compatible: "aspeed,ast2500-lpc-reset" or
+ - compatible: "aspeed,ast2600-lpc-reset" or

Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +1 -0
+			"aspeed,ast2500-lpc-reset"
 			"aspeed,ast2400-lpc-reset"
  - reg:			offset and length of the IP in the LHC memory region
  - #reset-controller	indicates the number of reset cells expected
Signature · 1 line
2.21.0
#3 lore raw

PATCH v4 2/10 dt-bindings: ipmi: Add aspeed-g6 compatible strings

In reply to Brad Bishop

The AST2600 SoC contains the same IPMI devices (KCS and BT) as the AST2500.

---
v4: add Andrew's review
v3: new for v3

---
 .../devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt    | 3 ++-
 Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt  | 7 ++++---
 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt +2 -1
index 028268fd99ee..4b43b7829bd9 100644
@@ -1,6 +1,6 @@
 * Aspeed BT (Block Transfer) IPMI interface
 
-The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+The Aspeed SOCs (AST2400, AST2500 and AST2600) are commonly used as BMCs
 (BaseBoard Management Controllers) and the BT interface can be used to
 perform in-band IPMI communication with their host.
 
@@ -9,6 +9,7 @@ Required properties:
 - compatible : should be one of
 	"aspeed,ast2400-ibt-bmc"
 	"aspeed,ast2500-ibt-bmc"
+	"aspeed,ast2600-ibt-bmc"
 - reg: physical address and size of the registers
 
 Optional properties:
Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt +4 -3
index d98a9bf45d6c..709c2efb80ef 100644
@@ -1,13 +1,14 @@
 * Aspeed KCS (Keyboard Controller Style) IPMI interface
 
-The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
-(Baseboard Management Controllers) and the KCS interface can be
-used to perform in-band IPMI communication with their host.
+The Aspeed SOCs (AST2400, AST2500 and AST200) are commonly used as BMCs
+(Baseboard Management Controllers) and the KCS interface can be used to
+perform in-band IPMI communication with their host.
 
 Required properties:
 - compatible : should be one of
     "aspeed,ast2400-kcs-bmc"
     "aspeed,ast2500-kcs-bmc"
+    "aspeed,ast2600-kcs-bmc"
 - interrupts : interrupt generated by the controller
 - kcs_chan : The LPC channel number in the controller
 - kcs_addr : The host CPU IO map address
Signature · 1 line
2.21.0
#4 lore raw

PATCH v4 3/10 soc: aspeed: lpc: Add G6 compatible strings

In reply to Brad Bishop

The AST2600(G6) has the same lpc-ctrl and lpc-snoop devices as the AST2500.

---
v4:
- no changes
v3:
- move ipmi, reset to a separate patch
v2:
- removed DT binding documentation changes

---
 drivers/soc/aspeed/aspeed-lpc-ctrl.c  | 1 +
 drivers/soc/aspeed/aspeed-lpc-snoop.c | 2 ++
 2 files changed, 3 insertions(+)
drivers/soc/aspeed/aspeed-lpc-ctrl.c +1 -0
index 01ed21e8bfee..12e4421dee37 100644
@@ -291,6 +291,7 @@ static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
 static const struct of_device_id aspeed_lpc_ctrl_match[] = {
 	{ .compatible = "aspeed,ast2400-lpc-ctrl" },
 	{ .compatible = "aspeed,ast2500-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2600-lpc-ctrl" },
 	{ },
 };
 
drivers/soc/aspeed/aspeed-lpc-snoop.c +2 -0
index 48f7ac238861..c7b4ac066b40 100644
@@ -325,6 +325,8 @@ static const struct of_device_id aspeed_lpc_snoop_match[] = {
 	  .data = &ast2400_model_data },
 	{ .compatible = "aspeed,ast2500-lpc-snoop",
 	  .data = &ast2500_model_data },
+	{ .compatible = "aspeed,ast2600-lpc-snoop",
+	  .data = &ast2500_model_data },
 	{ },
 };
 
Signature · 1 line
2.21.0
#6 lore raw

PATCH v4 4/10 ipmi: aspeed-g6: Add compatible strings

In reply to Brad Bishop

The AST2600 SoC contains the same IPMI (BT/KCS) devices as the AST2500.

---
v4: add Andrew's review
v3: new for v3

---
 drivers/char/ipmi/bt-bmc.c         | 1 +
 drivers/char/ipmi/kcs_bmc_aspeed.c | 1 +
 2 files changed, 2 insertions(+)
drivers/char/ipmi/bt-bmc.c +1 -0
index 40b9927c072c..0e600449931b 100644
@@ -513,6 +513,7 @@ static int bt_bmc_remove(struct platform_device *pdev)
 static const struct of_device_id bt_bmc_match[] = {
 	{ .compatible = "aspeed,ast2400-ibt-bmc" },
 	{ .compatible = "aspeed,ast2500-ibt-bmc" },
+	{ .compatible = "aspeed,ast2600-ibt-bmc" },
 	{ },
 };
 
drivers/char/ipmi/kcs_bmc_aspeed.c +1 -0
index 3c955946e647..a0a8bb89c9b3 100644
@@ -301,6 +301,7 @@ static int aspeed_kcs_remove(struct platform_device *pdev)
 static const struct of_device_id ast_kcs_bmc_match[] = {
 	{ .compatible = "aspeed,ast2400-kcs-bmc" },
 	{ .compatible = "aspeed,ast2500-kcs-bmc" },
+	{ .compatible = "aspeed,ast2600-kcs-bmc" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ast_kcs_bmc_match);
Signature · 1 line
2.21.0
#7 lore raw

PATCH v4 5/10 reset: simple: Add AST2600 compatibility string

In reply to Brad Bishop

The AST2600 SoC contains the same LPC register set as the AST2500.

---
v4: add Andrew's review
v3: new for v3

---
 drivers/reset/reset-simple.c | 1 +
 1 file changed, 1 insertion(+)
drivers/reset/reset-simple.c +1 -0
index 1154f7b1f4dd..2fe9c889a75a 100644
@@ -125,6 +125,7 @@ static const struct of_device_id reset_simple_dt_ids[] = {
 		.data = &reset_simple_active_low },
 	{ .compatible = "aspeed,ast2400-lpc-reset" },
 	{ .compatible = "aspeed,ast2500-lpc-reset" },
+	{ .compatible = "aspeed,ast2600-lpc-reset" },
 	{ .compatible = "bitmain,bm1880-reset",
 		.data = &reset_simple_active_low },
 	{ /* sentinel */ },
Signature · 1 line
2.21.0
#8 lore raw

PATCH v4 6/10 ARM: dts: aspeed-g6: Add lpc devices

In reply to Brad Bishop

Everything is the same as G5, except the devices have their own interrupt now.

---
v2: new for v2
v3: fixed broken ipmi/lpc interrupts
v4: add Andrew's ack

---
 arch/arm/boot/dts/aspeed-g6.dtsi | 87 ++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)
arch/arm/boot/dts/aspeed-g6.dtsi +87 -0
index 72038c16f541..3b42404b2ace 100644
@@ -249,6 +249,93 @@
 				status = "disabled";
 			};
 
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc@0 {
+					compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
+					reg = <0x0 0x80>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x0 0x80>;
+
+					kcs1: kcs1@0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <1>;
+						status = "disabled";
+					};
+					kcs2: kcs2@0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <2>;
+						status = "disabled";
+					};
+					kcs3: kcs3@0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <3>;
+						status = "disabled";
+					};
+				};
+
+				lpc_host: lpc-host@80 {
+					compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					kcs4: kcs4@0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <4>;
+						status = "disabled";
+					};
+
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2600-lpc-ctrl";
+						reg = <0x0 0x80>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lpc_snoop: lpc-snoop@0 {
+						compatible = "aspeed,ast2600-lpc-snoop";
+						reg = <0x0 0x80>;
+						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2600-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+					lpc_reset: reset-controller@18 {
+						compatible = "aspeed,ast2600-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
+					ibt: ibt@c0 {
+						compatible = "aspeed,ast2600-ibt-bmc";
+						reg = <0xc0 0x18>;
+						interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+				};
+			};
+
 			sdc: sdc@1e740000 {
 				compatible = "aspeed,ast2600-sd-controller";
 				reg = <0x1e740000 0x100>;
Signature · 1 line
2.21.0
#9 lore raw

PATCH v4 7/10 ARM: dts: aspeed: Add Rainier system

In reply to Brad Bishop

Rainier is a new IBM server with POWER host processors and an AST2600 BMC.

---
v4:
- align reserved memory region
v3:
- removed i2c, mac
- moved reserved memory
- set correct memory size
v2:
- reordered rainier DT elements (alphabetized).
- added rainier rtc, lpc-ctl, reserved memory, mac devices

---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 57 ++++++++++++++++++++
 2 files changed, 58 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
arch/arm/boot/dts/Makefile +1 -0
index 5af075c2f819..3ad9706337a2 100644
@@ -1278,6 +1278,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-wedge40.dtb \
 	aspeed-bmc-facebook-wedge100.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
 	aspeed-bmc-lenovo-hr630.dtb \
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts new file +57 -0

57 lines not on this page · raw message

Signature · 1 line
2.21.0
#11 lore raw

PATCH v4 8/10 ARM: dts: aspeed-g6: Expose SuperIO scratch registers

In reply to Brad Bishop

---
v4: add Andrew's ack
v3: new for v3

---
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/boot/dts/aspeed-g6.dtsi +4 -0
index 3b42404b2ace..d09f0bdefa43 100644
@@ -333,6 +333,10 @@
 						interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
 					};
+
+					sio_regs: regs {
+						compatible = "aspeed,bmc-misc";
+					};
 				};
 			};
 
Signature · 1 line
2.21.0
#12 lore raw

PATCH v4 9/10 ARM: dts: aspeed: rainier: Add mac devices

In reply to Brad Bishop

Rainier contains two network devices.

---
v4: add Andrew's review
v3: new for v3

---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +14 -0
index 080cd51b2a41..fd9f3529f0c3 100644
@@ -55,3 +55,17 @@
 	status = "okay";
 	memory-region = <&flash_memory>;
 };
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
Signature · 1 line
2.21.0
#13 lore raw

PATCH v4 10/10 ARM: dts: aspeed: rainier: Add i2c devices

In reply to Brad Bishop

---
v4: add Andrew's ack
v3: new for v3

---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 393 +++++++++++++++++++
 1 file changed, 393 insertions(+)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +393 -0
index fd9f3529f0c3..944ddc916ae7 100644
@@ -51,6 +51,399 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps2";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps2";
+		reg = <0x69>;
+	};
+
+	power-supply@6a {
+		compatible = "ibm,cffps2";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps2";
+		reg = <0x6b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	si7021-a20@20 {
+		compatible = "silabs,si7020";
+		reg = <0x20>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@b {
+		compatible = "ti,ucd90160";
+		reg = <0x0b>;
+	};
+
+	ucd90320@c {
+		compatible = "ti,ucd90160";
+		reg = <0x0c>;
+	};
+
+	ucd90320@11 {
+		compatible = "ti,ucd90160";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	ir35221@42 {
+		compatible = "infineon,ir35221";
+		reg = <0x42>;
+	};
+
+	ir35221@43 {
+		compatible = "infineon,ir35221";
+		reg = <0x43>;
+	};
+
+	ir35221@44 {
+		compatible = "infineon,ir35221";
+		reg = <0x44>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	ir35221@73 {
+		compatible = "infineon,ir35221";
+		reg = <0x73>;
+	};
+
+	ir35221@74 {
+		compatible = "infineon,ir35221";
+		reg = <0x74>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	ir35221@42 {
+		compatible = "infineon,ir35221";
+		reg = <0x42>;
+	};
+
+	ir35221@43 {
+		compatible = "infineon,ir35221";
+		reg = <0x43>;
+	};
+
+	ir35221@44 {
+		compatible = "infineon,ir35221";
+		reg = <0x44>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	ir35221@73 {
+		compatible = "infineon,ir35221";
+		reg = <0x73>;
+	};
+
+	ir35221@74 {
+		compatible = "infineon,ir35221";
+		reg = <0x74>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
 &lpc_ctrl {
 	status = "okay";
 	memory-region = <&flash_memory>;
Signature · 1 line
2.21.0
#14 lore raw
In reply to Brad Bishop

Hi Brad,

Will this series of patches submit to upstream?

Thanks,
Troy Lee
--
Yu-Ting Lee (Troy Lee) <[email protected]>

Quoted 51 lines · Brad Bishop
Quoted 6 lines

This is a quick attempt at wiring up some of the LPC bits on the AST2600, and then using it on a new board, Rainier, a new POWER system with an AST2600. The only verification performed was ensuring the kernel still booted and the ibt device probed using the Rainier device tree atop the ast2600-evb qemu model. Please review.

Changes since v3:
- commit message updates
- align rainier reserved memory
- reviews, acks

Changes since v2:
- split lpc, ipmi binding updates into separate patches
- split soc, ipmi, reset compatibles into separate patches
- moved sio_regs to separate G6 dtsi patch
- moved i2c and mac additions from rainier DT to separate patches

Changes since v1:
- split DT binding docs and driver changes into separate patches.
- reordered rainier DT elements (alphabetized).
- added rainier rtc, lpc-ctl, reserved memory, mac devices

Brad Bishop (10):
dt-bindings: aspeed-lpc: Add G6 compatible strings
dt-bindings: ipmi: Add aspeed-g6 compatible strings
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
ARM: dts: aspeed-g6: Add lpc devices
ARM: dts: aspeed: Add Rainier system
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
ARM: dts: aspeed: rainier: Add mac devices
ARM: dts: aspeed: rainier: Add i2c devices

 .../bindings/ipmi/aspeed,ast2400-ibt-bmc.txt  |   3 +-
 .../bindings/ipmi/aspeed-kcs-bmc.txt          |   7 +-
 .../devicetree/bindings/mfd/aspeed-lpc.txt    |   8 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts  | 464 ++++++++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi              |  91 ++++
 drivers/char/ipmi/bt-bmc.c                    |   1 +
 drivers/char/ipmi/kcs_bmc_aspeed.c            |   1 +
 drivers/reset/reset-simple.c                  |   1 +
 drivers/soc/aspeed/aspeed-lpc-ctrl.c          |   1 +
 drivers/soc/aspeed/aspeed-lpc-snoop.c         |   2 +
 11 files changed, 575 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts

--
2.21.0