backlight: gpio: simplify the driver
Subsystems (3)
v4 cover backlight: gpio: simplify the driver
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
The first patch adds all necessary data structures to ecovec24. Patch 2/7 unifies much of the code for both pdata and non-pdata cases. Patches 3-4/7 remove unused platform data fields. Last three patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvements
v2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local vars
v3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commit ec665b756e6f ("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7
Bartosz Golaszewski (7):
backlight: gpio: remove unneeded include
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for &pdev->dev
backlight: gpio: pull gpio_backlight_initial_power_state() into probe
arch/sh/boards/mach-ecovec24/setup.c | 33 ++++-- drivers/video/backlight/gpio_backlight.c | 107 +++++-------------- include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 52 insertions(+), 91 deletions(-)
Signature · 1 line
2.23.0
PATCH v4 1/7 backlight: gpio: remove unneeded include
From: Bartosz Golaszewski <[email protected]>
We no longer use any symbols from of_gpio.h. Remove this include.
--- drivers/video/backlight/gpio_backlight.c | 1 - 1 file changed, 1 deletion(-)
drivers/video/backlight/gpio_backlight.c +0 -1
@@ -12,7 +12,6 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/platform_data/gpio_backlight.h> #include <linux/platform_device.h> #include <linux/property.h>
Signature · 1 line
2.23.0
Re: [PATCH v4 1/7] backlight: gpio: remove unneeded include
Quoted 2 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Quoted 22 lines
We no longer use any symbols from
of_gpio.h. Remove this include.Signed-off-by Bartosz Golaszewski <[email protected]>--- drivers/video/backlight/gpio_backlight.c | 1 - 1 file changed, 1 deletion(-)drivers/video/backlight/gpio_backlight.c +0
-1@@ -12,7 +12,6 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/platform_data/gpio_backlight.h> #include <linux/platform_device.h> #include <linux/property.h> Signature · 1 line
2.23.0
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v4 1/7] backlight: gpio: remove unneeded include
In reply to Bartosz GolaszewskiQuoted 5 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
We no longer use any symbols from
of_gpio.h. Remove this include.Signed-off-by Bartosz Golaszewski <[email protected]>
Quoted 19 lines
--- drivers/video/backlight/gpio_backlight.c | 1 - 1 file changed, 1 deletion(-)drivers/video/backlight/gpio_backlight.c +0
-1@@ -12,7 +12,6 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/platform_data/gpio_backlight.h> #include <linux/platform_device.h> #include <linux/property.h> Signature · 1 line
2.23.0
Re: [PATCH v4 1/7] backlight: gpio: remove unneeded include
In reply to Bartosz GolaszewskiQuoted 5 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
We no longer use any symbols from
of_gpio.h. Remove this include.Signed-off-by Bartosz Golaszewski <[email protected]>
Thanks Bartosz,
Linus Walleij
PATCH v4 2/7 sh: ecovec24: add additional properties to the backlight device
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Add a GPIO lookup entry and a device property for GPIO backlight to the board file. Tie them to the platform device which is now registered using platform_device_register_full() because of the properties. These changes are inactive now but will be used once the gpio backlight driver is modified.
--- arch/sh/boards/mach-ecovec24/setup.c | 30 +++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-)
arch/sh/boards/mach-ecovec24/setup.c +25 -5
@@ -371,6 +371,19 @@ static struct platform_device lcdc_device = { }, }; +static struct gpiod_lookup_table gpio_backlight_lookup = { + .dev_id ="gpio-backlight.0" , + .table = { +GPIO_LOOKUP ("sh7724_pfc" ,GPIO_PTR1 ,NULL ,GPIO_ACTIVE_HIGH ), + { } + }, +}; + +static struct property_entry gpio_backlight_props[] = { +PROPERTY_ENTRY_BOOL ("default-on" ), + { } +}; +static struct gpio_backlight_platform_data gpio_backlight_data = { .fbdev = &lcdc_device.dev, .gpio =GPIO_PTR1 ,
@@ -378,13 +391,15 @@ static struct gpio_backlight_platform_data gpio_backlight_data = { .name = "backlight", }; -static struct platform_device gpio_backlight_device = { +static const struct platform_device_info gpio_backlight_device_info = { .name ="gpio-backlight" , - .dev = { - .platform_data = &gpio_backlight_data, - }, + .data = &gpio_backlight_data, + .size_data =sizeof (gpio_backlight_data), + .properties = gpio_backlight_props, }; +static struct platform_device *gpio_backlight_device; +/* CEU0 */ static struct ceu_platform_data ceu0_pdata = { .num_subdevs =2 ,
@@ -1006,7 +1021,6 @@ static struct platform_device *ecovec_devices[] __initdata = { &usb1_common_device, &usbhs_device, &lcdc_device, - &gpio_backlight_device, &keysc_device, &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1462,6 +1476,12 @@ static int __init arch_setup(void)#endif #endif +gpiod_add_lookup_table (&gpio_backlight_lookup); + gpio_backlight_device =platform_device_register_full ( + &gpio_backlight_device_info); +if (IS_ERR (gpio_backlight_device)) +return PTR_ERR (gpio_backlight_device); +return platform_add_devices (ecovec_devices,ARRAY_SIZE (ecovec_devices)); }
Signature · 1 line
2.23.0
PATCH v4 3/7 backlight: gpio: simplify the platform data handling
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Now that the last user of platform data (sh ecovec24) defines a proper GPIO lookup and sets the 'default-on' device property, we can drop the platform_data-specific GPIO handling and unify a big chunk of code.
The only field used from the platform data is now the fbdev pointer.
--- drivers/video/backlight/gpio_backlight.c | 62 +++++------------------- 1 file changed, 11 insertions(+), 51 deletions(-)
drivers/video/backlight/gpio_backlight.c +11 -51
@@ -6,7 +6,6 @@#include <linux/backlight.h> #include <linux/err.h> #include <linux/fb.h> -#include <linux/gpio.h> /* Only for legacy support */ #include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/kernel.h>
@@ -54,28 +53,6 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, }; -static int gpio_backlight_probe_dt (struct platform_device *pdev, -struct gpio_backlight *gbl) -{ -struct device *dev = &pdev->dev; -int ret; - - gbl->def_value =device_property_read_bool (dev,"default-on" ); - - gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS ); -if (IS_ERR (gbl->gpiod)) { - ret =PTR_ERR (gbl->gpiod); - -if (ret != -EPROBE_DEFER ) { -dev_err (dev, -"Error: The gpios parameter is missing or invalid.\n" ); - } -return ret; - } - -return 0 ; -} -static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl) {struct device_node *node = gbl->dev->of_node;
@@ -107,35 +84,18 @@ static int gpio_backlight_probe(struct platform_device *pdev) gbl->dev = &pdev->dev; -if (pdev->dev.fwnode) { - ret =gpio_backlight_probe_dt (pdev, gbl); -if (ret) -return ret; - }else if (pdata) { -/* -* Legacy platform data GPIO retrieveal. Do not expand -* the use of this code path, currently only used by one -* SH board. -*/ -unsigned long flags =GPIOF_DIR_OUT ; - +if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value = pdata->def_value; - flags |= gbl->def_value ?GPIOF_INIT_HIGH :GPIOF_INIT_LOW ; - - ret =devm_gpio_request_one (gbl->dev, pdata->gpio, flags, - pdata ? pdata->name :"backlight" ); -if (ret <0 ) { -dev_err (&pdev->dev,"unable to request GPIO\n" ); -return ret; - } - gbl->gpiod =gpio_to_desc (pdata->gpio); -if (!gbl->gpiod) -return -EINVAL ; - }else { -dev_err (&pdev->dev, -"failed to find platform data or device tree node.\n" ); -return -ENODEV ; + + gbl->def_value =device_property_read_bool (&pdev->dev,"default-on" ); + + gbl->gpiod =devm_gpiod_get (&pdev->dev,NULL ,GPIOD_ASIS ); +if (IS_ERR (gbl->gpiod)) { + ret =PTR_ERR (gbl->gpiod); +if (ret != -EPROBE_DEFER ) +dev_err (&pdev->dev, +"Error: The gpios parameter is missing or invalid.\n" ); +return ret; }memset (&props,0 ,sizeof (props));
Signature · 1 line
2.23.0
PATCH v4 4/7 sh: ecovec24: don't set unused fields in platform data
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Platform data fields other than fbdev are no longer used by the backlight driver. Remove them.
--- arch/sh/boards/mach-ecovec24/setup.c | 3 --- 1 file changed, 3 deletions(-)
arch/sh/boards/mach-ecovec24/setup.c +0 -3
@@ -386,9 +386,6 @@ static struct property_entry gpio_backlight_props[] = {static struct gpio_backlight_platform_data gpio_backlight_data = { .fbdev = &lcdc_device.dev, - .gpio =GPIO_PTR1 , - .def_value =1 , - .name ="backlight" , };static const struct platform_device_info gpio_backlight_device_info = {
Signature · 1 line
2.23.0
PATCH v4 5/7 backlight: gpio: remove unused fields from platform data
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Remove the platform data fields that nobody uses.
--- include/linux/platform_data/gpio_backlight.h | 3 --- 1 file changed, 3 deletions(-)
include/linux/platform_data/gpio_backlight.h +0 -3
@@ -9,9 +9,6 @@ struct device;struct gpio_backlight_platform_data {struct device *fbdev; -int gpio; -int def_value; -const char *name; };#endif
Signature · 1 line
2.23.0
PATCH v4 6/7 backlight: gpio: use a helper variable for &pdev->dev
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Instead of dereferencing pdev each time, use a helper variable for the associated device pointer.
--- drivers/video/backlight/gpio_backlight.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/video/backlight/gpio_backlight.c +9 -9
@@ -71,25 +71,25 @@ static int gpio_backlight_initial_power_state(struct gpio_backlight *gbl)static int gpio_backlight_probe (struct platform_device *pdev) { -struct gpio_backlight_platform_data *pdata = -dev_get_platdata (&pdev->dev); +struct device *dev = &pdev->dev; +struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev);struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl;int ret; - gbl =devm_kzalloc (&pdev->dev,sizeof (*gbl),GFP_KERNEL ); + gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )return -ENOMEM ; - gbl->dev = &pdev->dev; + gbl->dev = dev;if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (&pdev->dev,"default-on" ); + gbl->def_value =device_property_read_bool (dev,"default-on" ); - gbl->gpiod =devm_gpiod_get (&pdev->dev,NULL ,GPIOD_ASIS ); + gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) { ret =PTR_ERR (gbl->gpiod);if (ret != -EPROBE_DEFER )
@@ -101,11 +101,11 @@ static int gpio_backlight_probe(struct platform_device *pdev)memset (&props,0 ,sizeof (props)); props.type =BACKLIGHT_RAW ; props.max_brightness =1 ; - bl =devm_backlight_device_register (&pdev->dev,dev_name (&pdev->dev), - &pdev->dev, gbl, &gpio_backlight_ops, + bl =devm_backlight_device_register (dev,dev_name (dev), + dev, gbl, &gpio_backlight_ops, &props);if (IS_ERR (bl)) { -dev_err (&pdev->dev,"failed to register backlight\n" ); +dev_err (dev,"failed to register backlight\n" );return PTR_ERR (bl); }
Signature · 1 line
2.23.0
PATCH v4 7/7 backlight: gpio: pull gpio_backlight_initial_power_state() into probe
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
The probe function in the gpio-backlight driver is quite short. If we pull gpio_backlight_initial_power_state() into probe we can drop two more fields from struct gpio_backlight and shrink the driver code.
--- drivers/video/backlight/gpio_backlight.c | 36 ++++++++---------------- 1 file changed, 12 insertions(+), 24 deletions(-)
drivers/video/backlight/gpio_backlight.c +12 -24
@@ -17,11 +17,8 @@#include <linux/slab.h> struct gpio_backlight { -struct device *dev;struct device *fbdev; -struct gpio_desc *gpiod; -int def_value; };static int gpio_backlight_update_status (struct backlight_device *bl)
@@ -53,41 +50,24 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, }; -static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl) -{ -struct device_node *node = gbl->dev->of_node; - -/* Not booted with device tree or no phandle link to the node */ -if (!node || !node->phandle) -return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ; - -/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) -return FB_BLANK_POWERDOWN ; - -return FB_BLANK_UNBLANK ; -} - -static int gpio_backlight_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev); +struct device_node *of_node = dev->of_node;struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, def_value; gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )return -ENOMEM ; - gbl->dev = dev; -if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (dev,"default-on" ); + def_value =device_property_read_bool (dev,"default-on" ); gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) {
@@ -109,7 +89,15 @@ static int gpio_backlight_probe(struct platform_device *pdev)return PTR_ERR (bl); } - bl->props.power =gpio_backlight_initial_power_state (gbl); +/* Not booted with device tree or no phandle link to the node */ +if (!of_node || !of_node->phandle) + bl->props.power = def_value ?FB_BLANK_UNBLANK + :FB_BLANK_POWERDOWN ; +else if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) + bl->props.power =FB_BLANK_POWERDOWN ; +else + bl->props.power =FB_BLANK_UNBLANK ; + bl->props.brightness =1 ;backlight_update_status (bl);
Signature · 1 line
2.23.0
Re: [PATCH v4 7/7] backlight: gpio: pull gpio_backlight_initial_power_state() into probe
Quoted 28 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
The probe function in the gpio-backlight driver is quite short. If we pull
gpio_backlight_initial_power_state()into probe we can drop two more fields from structgpio_backlightand shrink the driver code.Signed-off-by Bartosz Golaszewski <[email protected]>--- drivers/video/backlight/gpio_backlight.c | 36 ++++++++---------------- 1 file changed, 12 insertions(+), 24 deletions(-)drivers/video/backlight/gpio_backlight.c +0
-3@@ -17,11 +17,8 @@#include <linux/slab.h> struct gpio_backlight { -struct device *dev;struct device *fbdev; -struct gpio_desc *gpiod; -int def_value; };static int gpio_backlight_update_status (struct backlight_device *bl)
drivers/video/backlight/gpio_backlight.c static const struct backlight_ops gpio_backlight_ops = { · line 56
Quoted 4 lines
drivers/video/backlight/gpio_backlight.c +0
-1@@ -53,41 +50,24 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, }; -static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl)
I'm inclined to view deleting this function as removing a comment (e.g. the function name helps us to read the code)!
Removing the variables from the context structure is good but why not just pass them to the function and let the compiler decided whether or not to inline.
Daniel.
Quoted 60 lines
drivers/video/backlight/gpio_backlight.c +12
-20-{ -struct device_node *node = gbl->dev->of_node; - -/* Not booted with device tree or no phandle link to the node */ -if (!node || !node->phandle) -return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ; - -/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) =0 ) -return FB_BLANK_POWERDOWN ; - -return FB_BLANK_UNBLANK ; -} - -static int gpio_backlight_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev); +struct device_node *of_node = dev->of_node;struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, def_value; gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl =NULL )return -ENOMEM ; - gbl->dev = dev; -if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (dev,"default-on" ); + def_value =device_property_read_bool (dev,"default-on" ); gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) {@@ -109,7 +89,15 @@ static int gpio_backlight_probe(struct platform_device *pdev)return PTR_ERR (bl); } - bl->props.power =gpio_backlight_initial_power_state (gbl); +/* Not booted with device tree or no phandle link to the node */ +if (!of_node || !of_node->phandle) + bl->props.power = def_value ?FB_BLANK_UNBLANK + :FB_BLANK_POWERDOWN ; +else if (gpiod_get_value_cansleep (gbl->gpiod) =0 ) + bl->props.power =FB_BLANK_POWERDOWN ; +else + bl->props.power =FB_BLANK_UNBLANK ; + bl->props.brightness =1 ;backlight_update_status (bl);Signature · 1 line
2.23.0
Re: [PATCH v4 7/7] backlight: gpio: pull gpio_backlight_initial_power_state() into probe
śr., 2 paź 2019 o 12:33 Daniel Thompson <[email protected]> napisał(a):
Quoted 33 lines · Bartosz Golaszewski
Quoted 31 lines
From: Bartosz Golaszewski <[email protected]>
The probe function in the gpio-backlight driver is quite short. If we pull
gpio_backlight_initial_power_state()into probe we can drop two more fields from structgpio_backlightand shrink the driver code.Signed-off-by Bartosz Golaszewski <[email protected]>--- drivers/video/backlight/gpio_backlight.c | 36 ++++++++---------------- 1 file changed, 12 insertions(+), 24 deletions(-)drivers/video/backlight/gpio_backlight.c +0
-3@@ -17,11 +17,8 @@#include <linux/slab.h> struct gpio_backlight { -struct device *dev;struct device *fbdev; -struct gpio_desc *gpiod; -int def_value; };static int gpio_backlight_update_status (struct backlight_device *bl)@@ -53,41 +50,24 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, };
Quoted 5 lines
drivers/video/backlight/gpio_backlight.c static const struct backlight_ops gpio_backlight_ops = { · line 56
Quoted 1 line
drivers/video/backlight/gpio_backlight.c +0
-1-static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl)I'm inclined to view deleting this function as removing a comment (e.g. the function name helps us to read the code)!
Right, but why not just add a comment then? The probe function is 50 lines long, there's really no need to split it. This will get inlined anyway too.
Bart
Quoted 68 lines
Removing the variables from the context structure is good but why not just pass them to the function and let the compiler decided whether or not to inline.
Daniel.
Quoted 60 lines
drivers/video/backlight/gpio_backlight.c +12
-21-{ -struct device_node *node = gbl->dev->of_node; - -/* Not booted with device tree or no phandle link to the node */ -if (!node || !node->phandle) -return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ; - -/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) -return FB_BLANK_POWERDOWN ; - -return FB_BLANK_UNBLANK ; -} - -static int gpio_backlight_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev); +struct device_node *of_node = dev->of_node;struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, def_value; gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )return -ENOMEM ; - gbl->dev = dev; -if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (dev,"default-on" ); + def_value =device_property_read_bool (dev,"default-on" ); gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) {@@ -109,7 +89,15 @@ static int gpio_backlight_probe(struct platform_device *pdev)return PTR_ERR (bl); } - bl->props.power =gpio_backlight_initial_power_state (gbl); +/* Not booted with device tree or no phandle link to the node */ +if (!of_node || !of_node->phandle) + bl->props.power = def_value ?FB_BLANK_UNBLANK + :FB_BLANK_POWERDOWN ; +else if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) + bl->props.power =FB_BLANK_POWERDOWN ; +else + bl->props.power =FB_BLANK_UNBLANK ; + bl->props.brightness =1 ;backlight_update_status (bl); --2.23.0
Re: [PATCH v4 7/7] backlight: gpio: pull gpio_backlight_initial_power_state() into probe
Quoted 34 lines · Bartosz Golaszewski
śr., 2 paź 2019 o 12:33 Daniel Thompson <[email protected]> napisał(a):
Quoted 33 lines · Bartosz Golaszewski
Quoted 31 lines
From: Bartosz Golaszewski <[email protected]>
The probe function in the gpio-backlight driver is quite short. If we pull
gpio_backlight_initial_power_state()into probe we can drop two more fields from structgpio_backlightand shrink the driver code.Signed-off-by Bartosz Golaszewski <[email protected]>--- drivers/video/backlight/gpio_backlight.c | 36 ++++++++---------------- 1 file changed, 12 insertions(+), 24 deletions(-)drivers/video/backlight/gpio_backlight.c +0
-3@@ -17,11 +17,8 @@#include <linux/slab.h> struct gpio_backlight { -struct device *dev;struct device *fbdev; -struct gpio_desc *gpiod; -int def_value; };static int gpio_backlight_update_status (struct backlight_device *bl)@@ -53,41 +50,24 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, };
Quoted 7 lines
Quoted 5 lines
drivers/video/backlight/gpio_backlight.c static const struct backlight_ops gpio_backlight_ops = { · line 56
Quoted 1 line
drivers/video/backlight/gpio_backlight.c +0
-1-static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl)I'm inclined to view deleting this function as removing a comment (e.g. the function name helps us to read the code)!
Right, but why not just add a comment then?
I guess you could add a comment but keeping it pulled out in a function makes it easier to compare against equivalent code in other drivers (such as pwm_bl).
Daniel.
Quoted 74 lines
The probe function is 50
lines long, there's really no need to split it. This will get inlined anyway too.Bart
Quoted 68 lines
Removing the variables from the context structure is good but why not just pass them to the function and let the compiler decided whether or not to inline.
Daniel.
Quoted 60 lines
drivers/video/backlight/gpio_backlight.c +12
-21-{ -struct device_node *node = gbl->dev->of_node; - -/* Not booted with device tree or no phandle link to the node */ -if (!node || !node->phandle) -return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ; - -/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) =0 ) -return FB_BLANK_POWERDOWN ; - -return FB_BLANK_UNBLANK ; -} - -static int gpio_backlight_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev); +struct device_node *of_node = dev->of_node;struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, def_value; gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl =NULL )return -ENOMEM ; - gbl->dev = dev; -if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (dev,"default-on" ); + def_value =device_property_read_bool (dev,"default-on" ); gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) {@@ -109,7 +89,15 @@ static int gpio_backlight_probe(struct platform_device *pdev)return PTR_ERR (bl); } - bl->props.power =gpio_backlight_initial_power_state (gbl); +/* Not booted with device tree or no phandle link to the node */ +if (!of_node || !of_node->phandle) + bl->props.power = def_value ?FB_BLANK_UNBLANK + :FB_BLANK_POWERDOWN ; +else if (gpiod_get_value_cansleep (gbl->gpiod) =0 ) + bl->props.power =FB_BLANK_POWERDOWN ; +else + bl->props.power =FB_BLANK_UNBLANK ; + bl->props.brightness =1 ;backlight_update_status (bl); --2.23.0
Re: [PATCH v4 7/7] backlight: gpio: pull gpio_backlight_initial_power_state() into probe
śr., 2 paź 2019 o 16:40 Daniel Thompson <[email protected]> napisał(a):
Quoted 42 lines · Bartosz Golaszewski
Quoted 40 lines
śr., 2 paź 2019 o 12:33 Daniel Thompson <[email protected]> napisał(a):
Quoted 38 lines · Bartosz Golaszewski
Quoted 28 lines
From: Bartosz Golaszewski <[email protected]>
The probe function in the gpio-backlight driver is quite short. If we pull
gpio_backlight_initial_power_state()into probe we can drop two more fields from structgpio_backlightand shrink the driver code.Signed-off-by Bartosz Golaszewski <[email protected]>--- drivers/video/backlight/gpio_backlight.c | 36 ++++++++---------------- 1 file changed, 12 insertions(+), 24 deletions(-)drivers/video/backlight/gpio_backlight.c +0
-3@@ -17,11 +17,8 @@#include <linux/slab.h> struct gpio_backlight { -struct device *dev;struct device *fbdev; -struct gpio_desc *gpiod; -int def_value; };static int gpio_backlight_update_status (struct backlight_device *bl)drivers/video/backlight/gpio_backlight.c static const struct backlight_ops gpio_backlight_ops = { · line 56
Quoted 4 lines
drivers/video/backlight/gpio_backlight.c +0
-1@@ -53,41 +50,24 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, }; -static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl)I'm inclined to view deleting this function as removing a comment (e.g. the function name helps us to read the code)!
Quoted 6 lines
Quoted 1 line
Right, but why not just add a comment then?
I guess you could add a comment but keeping it pulled out in a function makes it easier to compare against equivalent code in other drivers (such as
pwm_bl).
The pwm driver seems to be the only one that has this function and it's also much more complicated. Unless it's a hard NACK, I think that pulling all initialization into probe looks better and shrinks the driver visually.
Bart
Quoted 78 lines
Daniel.
Quoted 74 lines
The probe function is 50
lines long, there's really no need to split it. This will get inlined anyway too.Bart
Quoted 68 lines
Removing the variables from the context structure is good but why not just pass them to the function and let the compiler decided whether or not to inline.
Daniel.
Quoted 60 lines
drivers/video/backlight/gpio_backlight.c +12
-21-{ -struct device_node *node = gbl->dev->of_node; - -/* Not booted with device tree or no phandle link to the node */ -if (!node || !node->phandle) -return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ; - -/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) -return FB_BLANK_POWERDOWN ; - -return FB_BLANK_UNBLANK ; -} - -static int gpio_backlight_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev); +struct device_node *of_node = dev->of_node;struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, def_value; gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )return -ENOMEM ; - gbl->dev = dev; -if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (dev,"default-on" ); + def_value =device_property_read_bool (dev,"default-on" ); gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) {@@ -109,7 +89,15 @@ static int gpio_backlight_probe(struct platform_device *pdev)return PTR_ERR (bl); } - bl->props.power =gpio_backlight_initial_power_state (gbl); +/* Not booted with device tree or no phandle link to the node */ +if (!of_node || !of_node->phandle) + bl->props.power = def_value ?FB_BLANK_UNBLANK + :FB_BLANK_POWERDOWN ; +else if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) + bl->props.power =FB_BLANK_POWERDOWN ; +else + bl->props.power =FB_BLANK_UNBLANK ; + bl->props.brightness =1 ;backlight_update_status (bl); --2.23.0