Skip to contentSkip to conversation

Alter the trigger order for FE/BE DAI's based on command

RFC PATCH Superseded Ranjani Sridharan 3 participants 6 messages Oct 4, 2019

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Alter the trigger order for FE/BE DAI's based on command

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.

In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.

The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

My first thought was to use a BESPOKE trigger for the SOF driver but looking more into the implementation of the bespoke trigger in soc_pcm_bespoke_trigger() didnt indicate it had much to do with the ordering of the FE/BE DAI's but rather just use the bespoke trigger callbacks in the DAI driver.

More details on the SOF issue can be found in:
Github Issue: https://github.com/thesofproject/linux/issues/1160

Ranjani Sridharan (2):
ASoC: pcm: update FE/BE trigger order based on the command
ASoC: SOF: topology: set trigger order for FE DAI link

 sound/soc/soc-pcm.c      | 99 +++++++++++++++++++++++++++++-----------
 sound/soc/sof/topology.c |  4 ++
 2 files changed, 76 insertions(+), 27 deletions(-)
Signature · 6 lines
2.17.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#1 lore raw

RFC PATCH 1/2 ASoC: pcm: update FE/BE trigger order based on the command

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.

In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.

The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

Github Issue: https://github.com/thesofproject/linux/issues/1160

---
 sound/soc/soc-pcm.c | 99 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 72 insertions(+), 27 deletions(-)
sound/soc/soc-pcm.c +72 -27
index 66910500e3b6..8e5097eead27 100644
@@ -2340,42 +2340,85 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,
 }
 EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger);
 
+static int dpcm_dai_trigger_fe_first(struct snd_pcm_substream *substream,
+				     int cmd, bool fe_first)
+{
+	struct snd_soc_pcm_runtime *fe = substream->private_data;
+	int ret;
+
+	/* call trigger on the frontend before the backend. */
+	if (fe_first) {
+		dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n",
+			fe->dai_link->name, cmd);
+
+		ret = soc_pcm_trigger(substream, cmd);
+		if (ret < 0)
+			return ret;
+
+		ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
+		return ret;
+	}
+
+	/* call trigger on the frontend after the backend. */
+	ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(fe->dev, "ASoC: post trigger FE %s cmd %d\n",
+		fe->dai_link->name, cmd);
+
+	ret = soc_pcm_trigger(substream, cmd);
+
+	return ret;
+}
+
 static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *fe = substream->private_data;
-	int stream = substream->stream, ret;
+	int stream = substream->stream;
+	int ret = 0;
 	enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream];
 
 	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
 
 	switch (trigger) {
 	case SND_SOC_DPCM_TRIGGER_PRE:
-		/* call trigger on the frontend before the backend. */
-
-		dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n",
-				fe->dai_link->name, cmd);
-
-		ret = soc_pcm_trigger(substream, cmd);
-		if (ret < 0) {
-			dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret);
-			goto out;
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+		case SNDRV_PCM_TRIGGER_RESUME:
+		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, true);
+			break;
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, false);
+			break;
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, false);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
 		}
-
-		ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
 		break;
 	case SND_SOC_DPCM_TRIGGER_POST:
-		/* call trigger on the frontend after the backend. */
-
-		ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
-		if (ret < 0) {
-			dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret);
-			goto out;
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+		case SNDRV_PCM_TRIGGER_RESUME:
+		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, false);
+			break;
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, true);
+			break;
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, true);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
 		}
-
-		dev_dbg(fe->dev, "ASoC: post trigger FE %s cmd %d\n",
-				fe->dai_link->name, cmd);
-
-		ret = soc_pcm_trigger(substream, cmd);
 		break;
 	case SND_SOC_DPCM_TRIGGER_BESPOKE:
 		/* bespoke trigger() - handles both FE and BEs */
@@ -2384,10 +2427,6 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
 				fe->dai_link->name, cmd);
 
 		ret = soc_pcm_bespoke_trigger(substream, cmd);
-		if (ret < 0) {
-			dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret);
-			goto out;
-		}
 		break;
 	default:
 		dev_err(fe->dev, "ASoC: invalid trigger cmd %d for %s\n", cmd,
@@ -2396,6 +2435,12 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
 		goto out;
 	}
 
+	if (ret < 0) {
+		dev_err(fe->dev, "ASoC: trigger FE cmd: %d failed: %d\n",
+			cmd, ret);
+		goto out;
+	}
+
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
Signature · 6 lines
2.17.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#2 lore raw

Re: [alsa-devel] [RFC PATCH 1/2] ASoC: pcm: update FE/BE trigger order based on the command

Quoted 42 lines · Ranjani Sridharan

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.

In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.

The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

Github Issue: https://github.com/thesofproject/linux/issues/1160

---
  sound/soc/soc-pcm.c | 99 ++++++++++++++++++++++++++++++++-------------
  1 file changed, 72 insertions(+), 27 deletions(-)
sound/soc/soc-pcm.c +0 -0
index 66910500e3b6..8e5097eead27 100644

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, · line 2344

Quoted 5 lines
sound/soc/soc-pcm.c +2 -0
@@ -2340,42 +2340,85 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,
  }
  EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger);
 
+static int dpcm_dai_trigger_fe_first(struct snd_pcm_substream *substream,
+				     int cmd, bool fe_first)

the function name is odd with the fe_first repeat

maybe 'dpcm_dai_trigger_fe_be' ?

Quoted 54 lines
sound/soc/soc-pcm.c +35 -10
+{
+	struct snd_soc_pcm_runtime *fe = substream->private_data;
+	int ret;
+
+	/* call trigger on the frontend before the backend. */
+	if (fe_first) {
+		dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n",
+			fe->dai_link->name, cmd);
+
+		ret = soc_pcm_trigger(substream, cmd);
+		if (ret < 0)
+			return ret;
+
+		ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
+		return ret;
+	}
+
+	/* call trigger on the frontend after the backend. */
+	ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(fe->dev, "ASoC: post trigger FE %s cmd %d\n",
+		fe->dai_link->name, cmd);
+
+	ret = soc_pcm_trigger(substream, cmd);
+
+	return ret;
+}
+
  static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
  {
  	struct snd_soc_pcm_runtime *fe = substream->private_data;
-	int stream = substream->stream, ret;
+	int stream = substream->stream;
+	int ret = 0;
  	enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream];
 
  	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
 
  	switch (trigger) {
  	case SND_SOC_DPCM_TRIGGER_PRE:
-		/* call trigger on the frontend before the backend. */
-
-		dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n",
-				fe->dai_link->name, cmd);
-
-		ret = soc_pcm_trigger(substream, cmd);
-		if (ret < 0) {
-			dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret);
-			goto out;
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+		case SNDRV_PCM_TRIGGER_RESUME:

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, · line 2398

Quoted 10 lines
sound/soc/soc-pcm.c +10 -0
+		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, true);
+			break;
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, false);
+			break;
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, false);
+			break;

can we group these 3 cases together? The last two are identical.

Quoted 17 lines
sound/soc/soc-pcm.c +6 -8
+		default:
+			ret = -EINVAL;
+			break;
  		}
-
-		ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
  		break;
  	case SND_SOC_DPCM_TRIGGER_POST:
-		/* call trigger on the frontend after the backend. */
-
-		ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
-		if (ret < 0) {
-			dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret);
-			goto out;
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+		case SNDRV_PCM_TRIGGER_RESUME:

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, · line 2417

Quoted 10 lines
sound/soc/soc-pcm.c +10 -0
+		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, false);
+			break;
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, true);
+			break;
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			ret = dpcm_dai_trigger_fe_first(substream, cmd, true);
+			break;

can we group these 3 cases together? The last two are identical.

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, · line 2402

Quoted 4 lines
sound/soc/soc-pcm.c +3 -0
+		default:
+			ret = -EINVAL;
+			break;
  		}

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw

Re: [alsa-devel] [RFC PATCH 1/2] ASoC: pcm: update FE/BE trigger order based on the command

Quoted 47 lines · Pierre-Louis Bossart

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct

Quoted 42 lines · Ranjani Sridharan

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.

In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.

The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

Github Issue: https://github.com/thesofproject/linux/issues/1160

---
  sound/soc/soc-pcm.c | 99 ++++++++++++++++++++++++++++++++-------------
  1 file changed, 72 insertions(+), 27 deletions(-)
sound/soc/soc-pcm.c +0 -0
index 66910500e3b6..8e5097eead27 100644
@@ -2340,42 +2340,85 @@ int dpcm_be_dai_trigger(struct

snd_soc_pcm_runtime *fe, int stream,

Quoted 3 lines
sound/soc/soc-pcm.c +0 -0
  }
  EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger);
 
Quoted 8 lines

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct · line 2343

Quoted 1 line
sound/soc/soc-pcm.c +1 -0
+static int dpcm_dai_trigger_fe_first(struct snd_pcm_substream

*substream,

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, · line 2344

Quoted 1 line
sound/soc/soc-pcm.c +1 -0
+                                  int cmd, bool fe_first)

the function name is odd with the fe_first repeat

maybe 'dpcm_dai_trigger_fe_be' ?

Sure, will change in v2.

Quoted 64 lines
Quoted 22 lines
sound/soc/soc-pcm.c +21 -0
+{
+     struct snd_soc_pcm_runtime *fe = substream->private_data;
+     int ret;
+
+     /* call trigger on the frontend before the backend. */
+     if (fe_first) {
+             dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n",
+                     fe->dai_link->name, cmd);
+
+             ret = soc_pcm_trigger(substream, cmd);
+             if (ret < 0)
+                     return ret;
+
+             ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
+             return ret;
+     }
+
+     /* call trigger on the frontend after the backend. */
+     ret = dpcm_be_dai_trigger(fe, substream->stream, cmd);
+     if (ret < 0)
+             return ret;

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,

Quoted 10 lines
sound/soc/soc-pcm.c +9 -0
+
+     dev_dbg(fe->dev, "ASoC: post trigger FE %s cmd %d\n",
+             fe->dai_link->name, cmd);
+
+     ret = soc_pcm_trigger(substream, cmd);
+
+     return ret;
+}
+
  static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream,

int cmd)

Quoted 9 lines
sound/soc/soc-pcm.c +2 -1
  {
      struct snd_soc_pcm_runtime *fe = substream->private_data;
-     int stream = substream->stream, ret;
+     int stream = substream->stream;
+     int ret = 0;
      enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream];
 
      fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
 

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,

Quoted 10 lines
sound/soc/soc-pcm.c +0 -8
      switch (trigger) {
      case SND_SOC_DPCM_TRIGGER_PRE:
-             /* call trigger on the frontend before the backend. */
-
-             dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n",
-                             fe->dai_link->name, cmd);
-
-             ret = soc_pcm_trigger(substream, cmd);
-             if (ret < 0) {
-                     dev_err(fe->dev,"ASoC: trigger FE failed %d\n",

ret);

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,

Quoted 6 lines
sound/soc/soc-pcm.c +5 -1
-                     goto out;
+             switch (cmd) {
+             case SNDRV_PCM_TRIGGER_START:
+             case SNDRV_PCM_TRIGGER_RESUME:
+             case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+                     ret = dpcm_dai_trigger_fe_first(substream, cmd,

true);

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,

Quoted 4 lines
sound/soc/soc-pcm.c +4 -0
+                     break;
+             case SNDRV_PCM_TRIGGER_STOP:
+             case SNDRV_PCM_TRIGGER_SUSPEND:
+                     ret = dpcm_dai_trigger_fe_first(substream, cmd,
Quoted 9 lines

false);

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,

Quoted 3 lines
sound/soc/soc-pcm.c +3 -0
+                     break;
+             case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+                     ret = dpcm_dai_trigger_fe_first(substream, cmd,

false);

sound/soc/soc-pcm.c int dpcm_be_dai_trigger(struct · line 2398

Quoted 1 line
sound/soc/soc-pcm.c +1 -0
+                     break;

can we group these 3 cases together? The last two are identical.

Ahh yes, I originally intended to set the state here as well but changed my mind later on . Will fix in v2.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#4 lore raw

RFC PATCH 2/2 ASoC: SOF: topology: set trigger order for FE DAI link

In reply to Ranjani Sridharan

Set trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST to trigger the BE DAI's before the FE DAI's. This prevents the xruns seen on playback pipelines using the link DMA.

---
 sound/soc/sof/topology.c | 4 ++++
 1 file changed, 4 insertions(+)
sound/soc/sof/topology.c +4 -0
index 0aabb3190ddc..f00ecbc38c6c 100644
@@ -2827,6 +2827,10 @@ static int sof_link_load(struct snd_soc_component *scomp, int index,
 	if (!link->no_pcm) {
 		link->nonatomic = true;
 
+		/* set trigger order */
+		link->trigger[0] = SND_SOC_DPCM_TRIGGER_POST;
+		link->trigger[1] = SND_SOC_DPCM_TRIGGER_POST;
+
 		/* nothing more to do for FE dai links */
 		return 0;
 	}
Signature · 6 lines
2.17.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#5 lore raw
In reply to Ranjani Sridharan
Quoted 31 lines · Ranjani Sridharan

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.

In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.

The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

Quoted 8 lines

My first thought was to use a BESPOKE trigger for the SOF driver but looking more into the implementation of the bespoke trigger in soc_pcm_bespoke_trigger() didnt indicate it had much to do with the ordering of the FE/BE DAI's but rather just use the bespoke trigger callbacks in the DAI driver.

More details on the SOF issue can be found in:
Github Issue: https://github.com/thesofproject/linux/issues/1160

I am a bit confused because that GitHub link does not provide any test results, and the PR1277 CI results show only half of the platforms tested. not sure why. I also don't get if this is an issue specific to the HDaudio Link DMA or if this is a across-the-board issue.

The other comment is that I see quite a few legacy Intel machine drivers with the POST trigger hard-coded for front-ends, and we'd need to retest some of these platforms to see if this change broke them.

Quoted 9 lines

Ranjani Sridharan (2):
ASoC: pcm: update FE/BE trigger order based on the command
ASoC: SOF: topology: set trigger order for FE DAI link

  sound/soc/soc-pcm.c      | 99 +++++++++++++++++++++++++++++-----------
  sound/soc/sof/topology.c |  4 ++
  2 files changed, 76 insertions(+), 27 deletions(-)

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel