Skip to contentSkip to conversation

hw: Convert various reset() handler to DeviceReset

PATCH Superseded Philippe Mathieu-Daudé 4 participants 24 messages Oct 8, 2019 – Oct 10, 2019

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover hw: Convert various reset() handler to DeviceReset

Since v1:
- Removed the pci-host devices
- Removed the vmcoreinfo conversion (elmarco) but add a comment.
- Added Igor's R-b tag.

Following the thread discussion between Peter/Markus/Damien about reset handlers:
https://www.mail-archive.com/[email protected]/msg617103.html
I started to remove qemu_register_reset() calls from few qdevified devices (the trivial ones).

Regards,

Phil.

v1: https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg06367.html

Philippe Mathieu-Daudé (8):
hw/acpi/piix4: Convert reset handler to DeviceReset hw/isa/piix4: Convert reset handler to DeviceReset hw/ide/piix: Convert reset handler to DeviceReset hw/ide/sii3112: Convert reset handler to DeviceReset hw/ide/via82c: Convert reset handler to DeviceReset hw/isa/vt82c686: Convert reset handler to DeviceReset hw/input/lm832x: Convert reset handler to DeviceReset hw/misc/vmcoreinfo: Document its reset handler

 hw/acpi/piix4.c      |  7 +++----
 hw/ide/piix.c        |  8 +++-----
 hw/ide/sii3112.c     |  7 +++----
 hw/ide/via.c         | 10 ++++------
 hw/input/lm832x.c    | 12 +++++-------
 hw/isa/piix4.c       |  7 +++----
 hw/isa/vt82c686.c    | 11 ++++-------
 hw/misc/vmcoreinfo.c |  1 +
 8 files changed, 26 insertions(+), 37 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH v2 1/8 hw/acpi/piix4: Convert reset handler to DeviceReset

The PIIX4/PM is a PCI device within the PIIX4 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/acpi/piix4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/acpi/piix4.c +3 -4
index 5742c3df87..4e079b39bd 100644
@@ -27,7 +27,6 @@
 #include "hw/pci/pci.h"
 #include "hw/qdev-properties.h"
 #include "hw/acpi/acpi.h"
-#include "sysemu/reset.h"
 #include "sysemu/runstate.h"
 #include "sysemu/sysemu.h"
 #include "qapi/error.h"
@@ -344,9 +343,9 @@ static const VMStateDescription vmstate_acpi = {
     }
 };
 
-static void piix4_reset(void *opaque)
+static void piix4_pm_reset(DeviceState *dev)
 {
-    PIIX4PMState *s = opaque;
+    PIIX4PMState *s = PIIX4_PM(dev);
     PCIDevice *d = PCI_DEVICE(s);
     uint8_t *pci_conf = d->config;
 
@@ -542,7 +541,6 @@ static void piix4_pm_realize(PCIDevice *dev, Error **errp)
 
     s->machine_ready.notify = piix4_pm_machine_ready;
     qemu_add_machine_init_done_notifier(&s->machine_ready);
-    qemu_register_reset(piix4_reset, s);
 
     piix4_acpi_system_hot_add_init(pci_address_space_io(dev),
                                    pci_get_bus(dev), s);
@@ -692,6 +690,7 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
     k->revision = 0x03;
     k->class_id = PCI_CLASS_BRIDGE_OTHER;
+    dc->reset = piix4_pm_reset;
     dc->desc = "PM";
     dc->vmsd = &vmstate_acpi;
     dc->props = piix4_pm_properties;
Signature · 1 line
2.21.0
Reviewed-by on v2 1/8
#2 lore raw

Re: [PATCH v2 1/8] hw/acpi/piix4: Convert reset handler to DeviceReset

Quoted 8 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:28写道:

The PIIX4/PM is a PCI device within the PIIX4 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

Quoted 51 lines
---
 hw/acpi/piix4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/acpi/piix4.c +2 -4
index 5742c3df87..4e079b39bd 100644
@@ -27,7 +27,6 @@
 #include "hw/pci/pci.h"
 #include "hw/qdev-properties.h"
 #include "hw/acpi/acpi.h"
-#include "sysemu/reset.h"
 #include "sysemu/runstate.h"
 #include "sysemu/sysemu.h"
 #include "qapi/error.h"
@@ -344,9 +343,9 @@ static const VMStateDescription vmstate_acpi = {
     }
 };
 
-static void piix4_reset(void *opaque)
+static void piix4_pm_reset(DeviceState *dev)
 {
-    PIIX4PMState *s = opaque;
+    PIIX4PMState *s = PIIX4_PM(dev);
     PCIDevice *d = PCI_DEVICE(s);
     uint8_t *pci_conf = d->config;
 
@@ -542,7 +541,6 @@ static void piix4_pm_realize(PCIDevice *dev, Error
 **errp)
 
     s->machine_ready.notify = piix4_pm_machine_ready;
     qemu_add_machine_init_done_notifier(&s->machine_ready);
-    qemu_register_reset(piix4_reset, s);
 
     piix4_acpi_system_hot_add_init(pci_address_space_io(dev),
                                    pci_get_bus(dev), s);
hw/acpi/piix4.c +1 -0
@@ -692,6 +690,7 @@ static void piix4_pm_class_init(ObjectClass *klass,
 void *data)
     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
     k->revision = 0x03;
     k->class_id = PCI_CLASS_BRIDGE_OTHER;
+    dc->reset = piix4_pm_reset;
     dc->desc = "PM";
     dc->vmsd = &vmstate_acpi;
     dc->props = piix4_pm_properties;

--
2.21.0

Reviewed-by on v2 1/8
#3 lore raw

Re: [PATCH v2 1/8] hw/acpi/piix4: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé
Quoted 7 lines · Philippe Mathieu-Daudé

The PIIX4/PM is a PCI device within the PIIX4 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

feel free to take through the misc tree.

Quoted 46 lines
---
 hw/acpi/piix4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/acpi/piix4.c +3 -4
index 5742c3df87..4e079b39bd 100644
@@ -27,7 +27,6 @@
 #include "hw/pci/pci.h"
 #include "hw/qdev-properties.h"
 #include "hw/acpi/acpi.h"
-#include "sysemu/reset.h"
 #include "sysemu/runstate.h"
 #include "sysemu/sysemu.h"
 #include "qapi/error.h"
@@ -344,9 +343,9 @@ static const VMStateDescription vmstate_acpi = {
     }
 };
 
-static void piix4_reset(void *opaque)
+static void piix4_pm_reset(DeviceState *dev)
 {
-    PIIX4PMState *s = opaque;
+    PIIX4PMState *s = PIIX4_PM(dev);
     PCIDevice *d = PCI_DEVICE(s);
     uint8_t *pci_conf = d->config;
 
@@ -542,7 +541,6 @@ static void piix4_pm_realize(PCIDevice *dev, Error **errp)
 
     s->machine_ready.notify = piix4_pm_machine_ready;
     qemu_add_machine_init_done_notifier(&s->machine_ready);
-    qemu_register_reset(piix4_reset, s);
 
     piix4_acpi_system_hot_add_init(pci_address_space_io(dev),
                                    pci_get_bus(dev), s);
@@ -692,6 +690,7 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
     k->revision = 0x03;
     k->class_id = PCI_CLASS_BRIDGE_OTHER;
+    dc->reset = piix4_pm_reset;
     dc->desc = "PM";
     dc->vmsd = &vmstate_acpi;
     dc->props = piix4_pm_properties;
Signature · 1 line
2.21.0
#4 lore raw

PATCH v2 2/8 hw/isa/piix4: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé

The PIIX4/ISA is a PCI device within the PIIX4 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/isa/piix4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/isa/piix4.c +3 -4
index 3294056cd5..890d999abf 100644
@@ -28,7 +28,6 @@
 #include "hw/isa/isa.h"
 #include "hw/sysbus.h"
 #include "migration/vmstate.h"
-#include "sysemu/reset.h"
 
 PCIDevice *piix4_dev;
 
@@ -40,9 +39,9 @@ typedef struct PIIX4State {
 #define PIIX4_PCI_DEVICE(obj) \
     OBJECT_CHECK(PIIX4State, (obj), TYPE_PIIX4_PCI_DEVICE)
 
-static void piix4_reset(void *opaque)
+static void piix4_isa_reset(DeviceState *dev)
 {
-    PIIX4State *d = opaque;
+    PIIX4State *d = PIIX4_PCI_DEVICE(dev);
     uint8_t *pci_conf = d->dev.config;
 
     pci_conf[0x04] = 0x07; // master, memory and I/O
@@ -97,7 +96,6 @@ static void piix4_realize(PCIDevice *dev, Error **errp)
         return;
     }
     piix4_dev = &d->dev;
-    qemu_register_reset(piix4_reset, d);
 }
 
 int piix4_init(PCIBus *bus, ISABus **isa_bus, int devfn)
@@ -118,6 +116,7 @@ static void piix4_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_0;
     k->class_id = PCI_CLASS_BRIDGE_ISA;
+    dc->reset = piix4_isa_reset;
     dc->desc = "ISA bridge";
     dc->vmsd = &vmstate_piix4;
     /*
Signature · 1 line
2.21.0
Reviewed-by on v2 2/8
#5 lore raw

Re: [PATCH v2 2/8] hw/isa/piix4: Convert reset handler to DeviceReset

Quoted 7 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:49写道:

The PIIX4/ISA is a PCI device within the PIIX4 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

Quoted 50 lines
---
 hw/isa/piix4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/isa/piix4.c +3 -4
index 3294056cd5..890d999abf 100644
@@ -28,7 +28,6 @@
 #include "hw/isa/isa.h"
 #include "hw/sysbus.h"
 #include "migration/vmstate.h"
-#include "sysemu/reset.h"
 
 PCIDevice *piix4_dev;
 
@@ -40,9 +39,9 @@ typedef struct PIIX4State {
 #define PIIX4_PCI_DEVICE(obj) \
     OBJECT_CHECK(PIIX4State, (obj), TYPE_PIIX4_PCI_DEVICE)
 
-static void piix4_reset(void *opaque)
+static void piix4_isa_reset(DeviceState *dev)
 {
-    PIIX4State *d = opaque;
+    PIIX4State *d = PIIX4_PCI_DEVICE(dev);
     uint8_t *pci_conf = d->dev.config;
 
     pci_conf[0x04] = 0x07; // master, memory and I/O
@@ -97,7 +96,6 @@ static void piix4_realize(PCIDevice *dev, Error **errp)
         return;
     }
     piix4_dev = &d->dev;
-    qemu_register_reset(piix4_reset, d);
 }
 
 int piix4_init(PCIBus *bus, ISABus **isa_bus, int devfn)
@@ -118,6 +116,7 @@ static void piix4_class_init(ObjectClass *klass, void
 *data)
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_0;
     k->class_id = PCI_CLASS_BRIDGE_ISA;
+    dc->reset = piix4_isa_reset;
     dc->desc = "ISA bridge";
     dc->vmsd = &vmstate_piix4;
     /*

--
2.21.0

#6 lore raw

PATCH v2 3/8 hw/ide/piix: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé

The PIIX3/IDE is a PCI device within the PIIX3 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/ide/piix.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
hw/ide/piix.c +3 -5
index fba6bc8bff..18b2c3b722 100644
@@ -30,7 +30,6 @@
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
 #include "sysemu/dma.h"
-#include "sysemu/reset.h"
 
 #include "hw/ide/pci.h"
 #include "trace.h"
@@ -103,9 +102,9 @@ static void bmdma_setup_bar(PCIIDEState *d)
     }
 }
 
-static void piix3_reset(void *opaque)
+static void piix3_ide_reset(DeviceState *dev)
 {
-    PCIIDEState *d = opaque;
+    PCIIDEState *d = PCI_IDE(dev);
     PCIDevice *pd = PCI_DEVICE(d);
     uint8_t *pci_conf = pd->config;
     int i;
@@ -154,8 +153,6 @@ static void pci_piix_ide_realize(PCIDevice *dev, Error **errp)
 
     pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode
 
-    qemu_register_reset(piix3_reset, d);
-
     bmdma_setup_bar(d);
     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
 
@@ -247,6 +244,7 @@ static void piix3_ide_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
+    dc->reset = piix3_ide_reset;
     k->realize = pci_piix_ide_realize;
     k->exit = pci_piix_ide_exitfn;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
Signature · 1 line
2.21.0
#7 lore raw

Re: [PATCH v2 3/8] hw/ide/piix: Convert reset handler to DeviceReset

Quoted 53 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:32写道:

The PIIX3/IDE is a PCI device within the PIIX3 chipset, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/ide/piix.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
hw/ide/piix.c +3 -5
index fba6bc8bff..18b2c3b722 100644
@@ -30,7 +30,6 @@
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
 #include "sysemu/dma.h"
-#include "sysemu/reset.h"
 
 #include "hw/ide/pci.h"
 #include "trace.h"
@@ -103,9 +102,9 @@ static void bmdma_setup_bar(PCIIDEState *d)
     }
 }
 
-static void piix3_reset(void *opaque)
+static void piix3_ide_reset(DeviceState *dev)
 {
-    PCIIDEState *d = opaque;
+    PCIIDEState *d = PCI_IDE(dev);
     PCIDevice *pd = PCI_DEVICE(d);
     uint8_t *pci_conf = pd->config;
     int i;
@@ -154,8 +153,6 @@ static void pci_piix_ide_realize(PCIDevice *dev, Error
 **errp)
 
     pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode
 
-    qemu_register_reset(piix3_reset, d);
-
     bmdma_setup_bar(d);
     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
@@ -247,6 +244,7 @@ static void piix3_ide_class_init(ObjectClass *klass,
 void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
+    dc->reset = piix3_ide_reset;
     k->realize = pci_piix_ide_realize;
     k->exit = pci_piix_ide_exitfn;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
Quoted 2 lines

--

Shouldn't we also add the reset callback for piix4 ide device?

Thanks,
Li Qiang

Quoted 4 lines

2.21.0

#8 lore raw

Re: [PATCH v2 3/8] hw/ide/piix: Convert reset handler to DeviceReset

Quoted 61 lines · Li Qiang

Philippe Mathieu-Daudé <[email protected] <mailto:[email protected]>> 于 2019年10月8日周二 下午10:32写道:

    The PIIX3/IDE is a PCI device within the PIIX3 chipset, it will be reset
    when the PCI bus it stands on is reset.

    Convert its reset handler into a proper Device reset method.

    Signed-off-by: Philippe Mathieu-Daudé <[email protected]
    <mailto:[email protected]>>
    ---
      hw/ide/piix.c | 8 +++-----
      1 file changed, 3 insertions(+), 5 deletions(-)

    diff --git a/hw/ide/piix.c b/hw/ide/piix.c
    index fba6bc8bff..18b2c3b722 100644
    --- a/hw/ide/piix.c
    +++ b/hw/ide/piix.c
    @@ -30,7 +30,6 @@
      #include "sysemu/block-backend.h"
      #include "sysemu/blockdev.h"
      #include "sysemu/dma.h"
    -#include "sysemu/reset.h"

      #include "hw/ide/pci.h"
      #include "trace.h"
    @@ -103,9 +102,9 @@ static void bmdma_setup_bar(PCIIDEState *d)
          }
      }

    -static void piix3_reset(void *opaque)
    +static void piix3_ide_reset(DeviceState *dev)
      {
    -    PCIIDEState *d = opaque;
    +    PCIIDEState *d = PCI_IDE(dev);
          PCIDevice *pd = PCI_DEVICE(d);
          uint8_t *pci_conf = pd->config;
          int i;
    @@ -154,8 +153,6 @@ static void pci_piix_ide_realize(PCIDevice *dev,
    Error **errp)

          pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode

    -    qemu_register_reset(piix3_reset, d);
    -
          bmdma_setup_bar(d);
          pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO,
    &d->bmdma_bar);

    @@ -247,6 +244,7 @@ static void piix3_ide_class_init(ObjectClass
    *klass, void *data)
          DeviceClass *dc = DEVICE_CLASS(klass);
          PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    +    dc->reset = piix3_ide_reset;
          k->realize = pci_piix_ide_realize;
          k->exit = pci_piix_ide_exitfn;
          k->vendor_id = PCI_VENDOR_ID_INTEL;
    -- 
Quoted 1 line

Shouldn't we also add the reset callback for piix4 ide device?

Yes! You catched a nice bug which would have rendered the Malta board broken on reboot, thanks a lot!

Phil.

#9 lore raw

PATCH v2 4/8 hw/ide/sii3112: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé

The SiI3112A SATA controller is a PCI device, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/ide/sii3112.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/ide/sii3112.c +3 -4
index 2181260531..06605d7af2 100644
@@ -15,7 +15,6 @@
 #include "qemu/osdep.h"
 #include "hw/ide/pci.h"
 #include "qemu/module.h"
-#include "sysemu/reset.h"
 #include "trace.h"
 
 #define TYPE_SII3112_PCI "sii3112"
@@ -237,9 +236,9 @@ static void sii3112_set_irq(void *opaque, int channel, int level)
     sii3112_update_irq(s);
 }
 
-static void sii3112_reset(void *opaque)
+static void sii3112_reset(DeviceState *dev)
 {
-    SiI3112PCIState *s = opaque;
+    SiI3112PCIState *s = SII3112_PCI(dev);
     int i;
 
     for (i = 0; i < 2; i++) {
@@ -290,7 +289,6 @@ static void sii3112_pci_realize(PCIDevice *dev, Error **errp)
         s->bmdma[i].bus = &s->bus[i];
         ide_register_restart_cb(&s->bus[i]);
     }
-    qemu_register_reset(sii3112_reset, s);
 }
 
 static void sii3112_pci_class_init(ObjectClass *klass, void *data)
@@ -303,6 +301,7 @@ static void sii3112_pci_class_init(ObjectClass *klass, void *data)
     pd->class_id = PCI_CLASS_STORAGE_RAID;
     pd->revision = 1;
     pd->realize = sii3112_pci_realize;
+    dc->reset = sii3112_reset;
     dc->desc = "SiI3112A SATA controller";
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 }
Signature · 1 line
2.21.0
Reviewed-by on v2 4/8
#10 lore raw

Re: [PATCH v2 4/8] hw/ide/sii3112: Convert reset handler to DeviceReset

Quoted 7 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:32写道:

The SiI3112A SATA controller is a PCI device, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

Quoted 52 lines
---
 hw/ide/sii3112.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
hw/ide/sii3112.c +2 -3
index 2181260531..06605d7af2 100644
@@ -15,7 +15,6 @@
 #include "qemu/osdep.h"
 #include "hw/ide/pci.h"
 #include "qemu/module.h"
-#include "sysemu/reset.h"
 #include "trace.h"
 
 #define TYPE_SII3112_PCI "sii3112"
@@ -237,9 +236,9 @@ static void sii3112_set_irq(void *opaque, int channel,
 int level)
     sii3112_update_irq(s);
 }
 
-static void sii3112_reset(void *opaque)
+static void sii3112_reset(DeviceState *dev)
 {
-    SiI3112PCIState *s = opaque;
+    SiI3112PCIState *s = SII3112_PCI(dev);
     int i;
 
     for (i = 0; i < 2; i++) {
hw/ide/sii3112.c +0 -1
@@ -290,7 +289,6 @@ static void sii3112_pci_realize(PCIDevice *dev, Error
 **errp)
         s->bmdma[i].bus = &s->bus[i];
         ide_register_restart_cb(&s->bus[i]);
     }
-    qemu_register_reset(sii3112_reset, s);
 }
 

static void sii3112_pci_class_init(ObjectClass *klass, void *data)

hw/ide/sii3112.c +1 -0
@@ -303,6 +301,7 @@ static void sii3112_pci_class_init(ObjectClass *klass,
 void *data)
     pd->class_id = PCI_CLASS_STORAGE_RAID;
     pd->revision = 1;
     pd->realize = sii3112_pci_realize;
+    dc->reset = sii3112_reset;
     dc->desc = "SiI3112A SATA controller";
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);

}
--
2.21.0

#11 lore raw

PATCH v2 5/8 hw/ide/via82c: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé

The VIA82C686B IDE controller is a PCI device, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/ide/via.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/ide/via.c +4 -6
index 7087dc676e..053622bd82 100644
@@ -29,7 +29,6 @@
 #include "migration/vmstate.h"
 #include "qemu/module.h"
 #include "sysemu/dma.h"
-#include "sysemu/reset.h"
 
 #include "hw/ide/pci.h"
 #include "trace.h"
@@ -120,10 +119,10 @@ static void via_ide_set_irq(void *opaque, int n, int level)
     }
 }
 
-static void via_ide_reset(void *opaque)
+static void via_ide_reset(DeviceState *dev)
 {
-    PCIIDEState *d = opaque;
-    PCIDevice *pd = PCI_DEVICE(d);
+    PCIIDEState *d = PCI_IDE(dev);
+    PCIDevice *pd = PCI_DEVICE(dev);
     uint8_t *pci_conf = pd->config;
     int i;
 
@@ -172,8 +171,6 @@ static void via_ide_realize(PCIDevice *dev, Error **errp)
     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
     dev->wmask[PCI_INTERRUPT_LINE] = 0xf;
 
-    qemu_register_reset(via_ide_reset, d);
-
     memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops,
                           &d->bus[0], "via-ide0-data", 8);
     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]);
@@ -229,6 +226,7 @@ static void via_ide_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
+    dc->reset = via_ide_reset;
     k->realize = via_ide_realize;
     k->exit = via_ide_exitfn;
     k->vendor_id = PCI_VENDOR_ID_VIA;
Signature · 1 line
2.21.0
Reviewed-by on v2 5/8
#12 lore raw

Re: [PATCH v2 5/8] hw/ide/via82c: Convert reset handler to DeviceReset

Quoted 7 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:36写道:

The VIA82C686B IDE controller is a PCI device, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

Quoted 56 lines
---
 hw/ide/via.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/ide/via.c +3 -6
index 7087dc676e..053622bd82 100644
@@ -29,7 +29,6 @@
 #include "migration/vmstate.h"
 #include "qemu/module.h"
 #include "sysemu/dma.h"
-#include "sysemu/reset.h"
 
 #include "hw/ide/pci.h"
 #include "trace.h"
@@ -120,10 +119,10 @@ static void via_ide_set_irq(void *opaque, int n, int
 level)
     }
 }
 
-static void via_ide_reset(void *opaque)
+static void via_ide_reset(DeviceState *dev)
 {
-    PCIIDEState *d = opaque;
-    PCIDevice *pd = PCI_DEVICE(d);
+    PCIIDEState *d = PCI_IDE(dev);
+    PCIDevice *pd = PCI_DEVICE(dev);
     uint8_t *pci_conf = pd->config;
     int i;
@@ -172,8 +171,6 @@ static void via_ide_realize(PCIDevice *dev, Error
 **errp)
     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
     dev->wmask[PCI_INTERRUPT_LINE] = 0xf;
 
-    qemu_register_reset(via_ide_reset, d);
-
     memory_region_init_io(&d->data_bar[0], OBJECT(d),
 &pci_ide_data_le_ops,
                           &d->bus[0], "via-ide0-data", 8);
     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]);
hw/ide/via.c +1 -0
@@ -229,6 +226,7 @@ static void via_ide_class_init(ObjectClass *klass,
 void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
+    dc->reset = via_ide_reset;
     k->realize = via_ide_realize;
     k->exit = via_ide_exitfn;
     k->vendor_id = PCI_VENDOR_ID_VIA;

--
2.21.0

#13 lore raw

PATCH v2 6/8 hw/isa/vt82c686: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé

The VIA VT82C686 Southbridge is a PCI device, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/isa/vt82c686.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
hw/isa/vt82c686.c +4 -7
index 50bd28fa82..616f67f347 100644
@@ -23,7 +23,6 @@
 #include "hw/isa/apm.h"
 #include "hw/acpi/acpi.h"
 #include "hw/i2c/pm_smbus.h"
-#include "sysemu/reset.h"
 #include "qemu/module.h"
 #include "qemu/timer.h"
 #include "exec/address-spaces.h"
@@ -116,11 +115,10 @@ static const MemoryRegionOps superio_ops = {
     },
 };
 
-static void vt82c686b_reset(void * opaque)
+static void vt82c686b_isa_reset(DeviceState *dev)
 {
-    PCIDevice *d = opaque;
-    uint8_t *pci_conf = d->config;
-    VT82C686BState *vt82c = VT82C686B_DEVICE(d);
+    VT82C686BState *vt82c = VT82C686B_DEVICE(dev);
+    uint8_t *pci_conf = vt82c->dev.config;
 
     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
@@ -476,8 +474,6 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
      * But we do not emulate a floppy, so just set it here. */
     memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
                                 &vt82c->superio);
-
-    qemu_register_reset(vt82c686b_reset, d);
 }
 
 ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn)
@@ -501,6 +497,7 @@ static void via_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
     k->class_id = PCI_CLASS_BRIDGE_ISA;
     k->revision = 0x40;
+    dc->reset = vt82c686b_isa_reset;
     dc->desc = "ISA bridge";
     dc->vmsd = &vmstate_via;
     /*
Signature · 1 line
2.21.0
Reviewed-by on v2 6/8
#14 lore raw

Re: [PATCH v2 6/8] hw/isa/vt82c686: Convert reset handler to DeviceReset

Quoted 7 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:39写道:

The VIA VT82C686 Southbridge is a PCI device, it will be reset when the PCI bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

Quoted 56 lines
---
 hw/isa/vt82c686.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
hw/isa/vt82c686.c +3 -5
index 50bd28fa82..616f67f347 100644
@@ -23,7 +23,6 @@
 #include "hw/isa/apm.h"
 #include "hw/acpi/acpi.h"
 #include "hw/i2c/pm_smbus.h"
-#include "sysemu/reset.h"
 #include "qemu/module.h"
 #include "qemu/timer.h"
 #include "exec/address-spaces.h"
@@ -116,11 +115,10 @@ static const MemoryRegionOps superio_ops = {
     },
 };
 
-static void vt82c686b_reset(void * opaque)
+static void vt82c686b_isa_reset(DeviceState *dev)
 {
-    PCIDevice *d = opaque;
-    uint8_t *pci_conf = d->config;
-    VT82C686BState *vt82c = VT82C686B_DEVICE(d);
+    VT82C686BState *vt82c = VT82C686B_DEVICE(dev);
+    uint8_t *pci_conf = vt82c->dev.config;
 
     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO |

PCI_COMMAND_MEMORY |

hw/isa/vt82c686.c +0 -2
@@ -476,8 +474,6 @@ static void vt82c686b_realize(PCIDevice *d, Error
 **errp)
      * But we do not emulate a floppy, so just set it here. */
     memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
                                 &vt82c->superio);
-
-    qemu_register_reset(vt82c686b_reset, d);
 }
 

ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn)

hw/isa/vt82c686.c +1 -0
@@ -501,6 +497,7 @@ static void via_class_init(ObjectClass *klass, void
 *data)
     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
     k->class_id = PCI_CLASS_BRIDGE_ISA;
     k->revision = 0x40;
+    dc->reset = vt82c686b_isa_reset;
     dc->desc = "ISA bridge";
     dc->vmsd = &vmstate_via;
     /*

--
2.21.0

#15 lore raw

PATCH v2 7/8 hw/input/lm832x: Convert reset handler to DeviceReset

In reply to Philippe Mathieu-Daudé

The LM8323 key-scan controller is a I2C device, it will be reset when the I2C bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

---
 hw/input/lm832x.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
hw/input/lm832x.c +5 -7
index a37eb854b9..aa629ddbf1 100644
@@ -24,7 +24,6 @@
 #include "migration/vmstate.h"
 #include "qemu/module.h"
 #include "qemu/timer.h"
-#include "sysemu/reset.h"
 #include "ui/console.h"
 
 #define TYPE_LM8323 "lm8323"
@@ -94,8 +93,10 @@ static void lm_kbd_gpio_update(LM823KbdState *s)
 {
 }
 
-static void lm_kbd_reset(LM823KbdState *s)
+static void lm_kbd_reset(DeviceState *dev)
 {
+    LM823KbdState *s = LM8323(dev);
+
     s->config = 0x80;
     s->status = INT_NOINIT;
     s->acttime = 125;
@@ -273,7 +274,7 @@ static void lm_kbd_write(LM823KbdState *s, int reg, int byte, uint8_t value)
 
     case LM832x_CMD_RESET:
         if (value == 0xaa)
-            lm_kbd_reset(s);
+            lm_kbd_reset(DEVICE(s));
         else
             lm_kbd_error(s, ERR_BADPAR);
         s->reg = LM832x_GENERAL_ERROR;
@@ -476,10 +477,6 @@ static void lm8323_realize(DeviceState *dev, Error **errp)
     s->pwm.tm[1] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm1_tick, s);
     s->pwm.tm[2] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm2_tick, s);
     qdev_init_gpio_out(dev, &s->nirq, 1);
-
-    lm_kbd_reset(s);
-
-    qemu_register_reset((void *) lm_kbd_reset, s);
 }
 
 void lm832x_key_event(DeviceState *dev, int key, int state)
@@ -507,6 +504,7 @@ static void lm8323_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
 
+    dc->reset = lm_kbd_reset;
     dc->realize = lm8323_realize;
     k->event = lm_i2c_event;
     k->recv = lm_i2c_rx;
Signature · 1 line
2.21.0
Reviewed-by on v2 7/8
#16 lore raw

Re: [PATCH v2 7/8] hw/input/lm832x: Convert reset handler to DeviceReset

Quoted 7 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:38写道:

The LM8323 key-scan controller is a I2C device, it will be reset when the I2C bus it stands on is reset.

Convert its reset handler into a proper Device reset method.

Quoted 64 lines
---
 hw/input/lm832x.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
hw/input/lm832x.c +4 -3
index a37eb854b9..aa629ddbf1 100644
@@ -24,7 +24,6 @@
 #include "migration/vmstate.h"
 #include "qemu/module.h"
 #include "qemu/timer.h"
-#include "sysemu/reset.h"
 #include "ui/console.h"
 
 #define TYPE_LM8323 "lm8323"
@@ -94,8 +93,10 @@ static void lm_kbd_gpio_update(LM823KbdState *s)
 {
 }
 
-static void lm_kbd_reset(LM823KbdState *s)
+static void lm_kbd_reset(DeviceState *dev)
 {
+    LM823KbdState *s = LM8323(dev);
+
     s->config = 0x80;
     s->status = INT_NOINIT;
     s->acttime = 125;
@@ -273,7 +274,7 @@ static void lm_kbd_write(LM823KbdState *s, int reg,
 int byte, uint8_t value)
 
     case LM832x_CMD_RESET:
         if (value == 0xaa)
-            lm_kbd_reset(s);
+            lm_kbd_reset(DEVICE(s));
         else
             lm_kbd_error(s, ERR_BADPAR);
         s->reg = LM832x_GENERAL_ERROR;
hw/input/lm832x.c +0 -4
@@ -476,10 +477,6 @@ static void lm8323_realize(DeviceState *dev, Error
 **errp)
     s->pwm.tm[1] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm1_tick, s);
     s->pwm.tm[2] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm2_tick, s);
     qdev_init_gpio_out(dev, &s->nirq, 1);
-
-    lm_kbd_reset(s);
-
-    qemu_register_reset((void *) lm_kbd_reset, s);
 }
 

void lm832x_key_event(DeviceState *dev, int key, int state)

hw/input/lm832x.c +1 -0
@@ -507,6 +504,7 @@ static void lm8323_class_init(ObjectClass *klass, void
 *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
 
+    dc->reset = lm_kbd_reset;
     dc->realize = lm8323_realize;
     k->event = lm_i2c_event;
     k->recv = lm_i2c_rx;

--
2.21.0

#17 lore raw

PATCH v2 8/8 hw/misc/vmcoreinfo: Add comment about reset handler

In reply to Philippe Mathieu-Daudé

The VM coreinfo device does not sit on a bus, so it won't be reset automatically. This is why it calls qemu_register_reset().

Add a comment about it, so we don't convert its reset handler to a DeviceReset method.

---
 hw/misc/vmcoreinfo.c | 4 ++++
 1 file changed, 4 insertions(+)
hw/misc/vmcoreinfo.c +4 -0
index 326a3ce8f4..a9d718fc23 100644
@@ -61,6 +61,10 @@ static void vmcoreinfo_realize(DeviceState *dev, Error **errp)
                              NULL, fw_cfg_vmci_write, s,
                              &s->vmcoreinfo, sizeof(s->vmcoreinfo), false);
 
+    /*
+     * This device requires to register a global reset because it is
+     * not plugged to a bus (which, as its QOM parent, would reset it).
+     */
     qemu_register_reset(vmcoreinfo_reset, dev);
     vmcoreinfo_state = s;
 }
Signature · 1 line
2.21.0
Reviewed-by on v2 8/8
#18 lore raw

Re: [PATCH v2 8/8] hw/misc/vmcoreinfo: Add comment about reset handler

Quoted 8 lines · Philippe Mathieu-Daudé

The VM coreinfo device does not sit on a bus, so it won't be reset automatically. This is why it calls qemu_register_reset().

Add a comment about it, so we don't convert its reset handler to a DeviceReset method.

Quoted 22 lines
---
 hw/misc/vmcoreinfo.c | 4 ++++
 1 file changed, 4 insertions(+)
hw/misc/vmcoreinfo.c +4 -1
index 326a3ce8f4..a9d718fc23 100644
@@ -61,6 +61,10 @@ static void vmcoreinfo_realize(DeviceState *dev, Error **errp)
                              NULL, fw_cfg_vmci_write, s,
                              &s->vmcoreinfo, sizeof(s->vmcoreinfo), false);
 
+    /*
+     * This device requires to register a global reset because it is
+     * not plugged to a bus (which, as its QOM parent, would reset it).
+     */
     qemu_register_reset(vmcoreinfo_reset, dev);
     vmcoreinfo_state = s;
 }
--

2.21.0

Reviewed-by on v2 8/8
#19 lore raw

Re: [PATCH v2 8/8] hw/misc/vmcoreinfo: Add comment about reset handler

In reply to Philippe Mathieu-Daudé
Quoted 8 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:40写道:

The VM coreinfo device does not sit on a bus, so it won't be reset automatically. This is why it calls qemu_register_reset().

Add a comment about it, so we don't convert its reset handler to a DeviceReset method.

There are some other device-related code using 'qemu_register_reset'. Maybe we can also add theses comment.

Thanks,
Li Qiang

Quoted 26 lines
---
 hw/misc/vmcoreinfo.c | 4 ++++
 1 file changed, 4 insertions(+)
hw/misc/vmcoreinfo.c +4 -0
index 326a3ce8f4..a9d718fc23 100644
@@ -61,6 +61,10 @@ static void vmcoreinfo_realize(DeviceState *dev, Error
 **errp)
                              NULL, fw_cfg_vmci_write, s,
                              &s->vmcoreinfo, sizeof(s->vmcoreinfo),
 false);
 
+    /*
+     * This device requires to register a global reset because it is
+     * not plugged to a bus (which, as its QOM parent, would reset it).
+     */
     qemu_register_reset(vmcoreinfo_reset, dev);
     vmcoreinfo_state = s;

}
--
2.21.0

#20 lore raw
In reply to Philippe Mathieu-Daudé
Quoted 3 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月8日周二 下午10:47写道:

Since v1:
- Removed the pci-host devices

Hello I want to know why remove this?

Thanks,
Li Qiang

Quoted 40 lines

- Removed the vmcoreinfo conversion (elmarco) but add a comment.
- Added Igor's R-b tag.

Following the thread discussion between Peter/Markus/Damien about reset handlers:
https://www.mail-archive.com/[email protected]/msg617103.html
I started to remove qemu_register_reset() calls from few qdevified devices (the trivial ones).

Regards,

Phil.

v1: https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg06367.html

Philippe Mathieu-Daudé (8):
hw/acpi/piix4: Convert reset handler to DeviceReset hw/isa/piix4: Convert reset handler to DeviceReset hw/ide/piix: Convert reset handler to DeviceReset hw/ide/sii3112: Convert reset handler to DeviceReset hw/ide/via82c: Convert reset handler to DeviceReset hw/isa/vt82c686: Convert reset handler to DeviceReset hw/input/lm832x: Convert reset handler to DeviceReset hw/misc/vmcoreinfo: Document its reset handler

 hw/acpi/piix4.c      |  7 +++----
 hw/ide/piix.c        |  8 +++-----
 hw/ide/sii3112.c     |  7 +++----
 hw/ide/via.c         | 10 ++++------
 hw/input/lm832x.c    | 12 +++++-------
 hw/isa/piix4.c       |  7 +++----
 hw/isa/vt82c686.c    | 11 ++++-------
 hw/misc/vmcoreinfo.c |  1 +
 8 files changed, 26 insertions(+), 37 deletions(-)

--
2.21.0

#21 lore raw

Hi Li,

Quoted 7 lines · Li Qiang

Philippe Mathieu-Daudé <[email protected] <mailto:[email protected]>> 于 2019年10月8日周二 下午10:47写道:

Since v1:
- Removed the pci-host devices

Hello  I want to know why  remove this?

I haven't removed the devices, I simply remove the patches converting them to DeviceReset, basically because I've not enough time to check if the are on a bus that would reset them. I added these devices on my TODO list for later, so meanwhile the other devices can be easily reviewed and merged. When few patches from a series are not reviewed or incorrect, sometime the rest of the series is not merged, so I prefer to split it and get these patches merged.

Quoted 25 lines

- Removed the vmcoreinfo conversion (elmarco) but add a comment.
- Added Igor's R-b tag.

Following the thread discussion between Peter/Markus/Damien about reset handlers:
https://www.mail-archive.com/[email protected]/msg617103.html
I started to remove qemu_register_reset() calls from few qdevified devices (the trivial ones).

Regards,

Phil.

v1: https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg06367.html

Philippe Mathieu-Daudé (8):
  hw/acpi/piix4: Convert reset handler to DeviceReset hw/isa/piix4: Convert reset handler to DeviceReset hw/ide/piix: Convert reset handler to DeviceReset hw/ide/sii3112: Convert reset handler to DeviceReset hw/ide/via82c: Convert reset handler to DeviceReset hw/isa/vt82c686: Convert reset handler to DeviceReset hw/input/lm832x: Convert reset handler to DeviceReset hw/misc/vmcoreinfo: Document its reset handler

#22 lore raw
Quoted 6 lines · Philippe Mathieu-Daudé <[email protected]> 于2019年10月10日周四 上午3:54写道:

Hi Li,

Quoted 3 lines · Li Qiang

Philippe Mathieu-Daudé <[email protected] <mailto:[email protected]>> 于 2019年10月8日周二 下午10:47写道:

Quoted 8 lines
Quoted 5 lines

Since v1:
- Removed the pci-host devices

Hello I want to know why remove this?

I haven't removed the devices, I simply remove the patches converting them to DeviceReset,

Yes, I mean the patches.

Quoted 2 lines

basically because I've not enough time to check if the are on a bus that would reset them.

IIUC, they are right.

Quoted 5 lines

I added these devices on my TODO
list for later, so meanwhile the other devices can be easily reviewed and merged. When few patches from a series are not reviewed or incorrect, sometime the rest of the series is not merged, so I prefer to split it and get these patches merged.

As far as I can see, most of the devices' usage of qemu_register_reset function can be
convert to 'dc->reset'. In the main function.

qemu_register_reset(qbus_reset_all_fn, sysbus_get_default());

The 'qbus_reset_all_fn' calls 'qbus_reset_all' from the 'main-sys-bus'. Then 'qdev_reset_one'
will call 'device_reset'. So IIUC every bus attached to 'main-sys-bus' can be reset through 'dc->reset'

So I'm quite sure most of the cases that devices use 'qemu_register_reset' can be changed to 'dc->reset'.
Seems you're busy, If you don't mind, I can do some of the work to convert 'reset' callback(not a patchset, one by one).

Thanks,
Li Qiang

Quoted 28 lines
Quoted 11 lines

- Removed the vmcoreinfo conversion (elmarco) but add a comment.
- Added Igor's R-b tag.

Following the thread discussion between Peter/Markus/Damien about reset handlers:
https://www.mail-archive.com/[email protected]/msg617103.html
I started to remove qemu_register_reset() calls from few qdevified devices (the trivial ones).

Quoted 5 lines

Regards,

Phil.

v1:

https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg06367.html

Quoted 10 lines

Philippe Mathieu-Daudé (8):
hw/acpi/piix4: Convert reset handler to DeviceReset hw/isa/piix4: Convert reset handler to DeviceReset hw/ide/piix: Convert reset handler to DeviceReset hw/ide/sii3112: Convert reset handler to DeviceReset hw/ide/via82c: Convert reset handler to DeviceReset hw/isa/vt82c686: Convert reset handler to DeviceReset hw/input/lm832x: Convert reset handler to DeviceReset hw/misc/vmcoreinfo: Document its reset handler

#23 lore raw
Quoted 39 lines · Li Qiang

Philippe Mathieu-Daudé <[email protected] <mailto:[email protected]>> 于 2019年10月10日周四 上午3:54写道:

Hi Li,

On 10/9/19 4:28 AM, Li Qiang wrote:
> Philippe Mathieu-Daudé <[email protected]
<mailto:[email protected]> <mailto:[email protected] <mailto:[email protected]>>> 于
> 2019年10月8日周二 下午10:47写道:
>
>     Since v1:
>     - Removed the pci-host devices
>
>
> Hello  I want to know why  remove this?

I haven't removed the devices, I simply remove the patches converting them to DeviceReset,

Yes, I mean the patches.

basically because I've not enough time to check if the are on a bus that would reset them.

IIUC, they are right.

I added these devices on my TODO
list for later, so meanwhile the other devices can be easily reviewed and merged. When few patches from a series are not reviewed or incorrect, sometime the rest of the series is not merged, so I prefer to
split it and get these patches merged.

As far as I can see, most of the devices' usage of qemu_register_reset function can be convert to 'dc->reset'. In the main function.

Quoted 7 lines

qemu_register_reset(qbus_reset_all_fn, sysbus_get_default());

The 'qbus_reset_all_fn' calls 'qbus_reset_all' from the 'main-sys-bus'. Then 'qdev_reset_one' will call 'device_reset'. So IIUC every bus attached to 'main-sys-bus' can be reset through 'dc->reset'

So I'm quite sure most of the cases that devices use 'qemu_register_reset' can be changed to 'dc->reset'. Seems you're busy,  If you don't mind, I can do some of the work to convert 'reset' callback(not a patchset, one by one).

I guess we are all busy ;) I'm just trying to prioritize here.
This series is not very important because what we have today works, and I would rather not introduce regressions. What happened then is it is the 3rd time at least I get confuse with the qemu_register_reset() function while reviewing code. Then my rule of thumb is if an improvement takes less than 1h, then I just do it and keep going, else if I postpone it I'll never go back to it. When a series start to take too much rework it means I might started it wrongly, or I underestimated the time required. Time that is taken of other more important tasks. Today I prefer merged a subset of the series that is correct, rather than aiming for the whole and never get it merged.

If you are interested in respining/fixing the pci-host devices I'd be very thankful! I appreciate your help (and reviews).

Regards,

Phil.

PD: I'll respin as v3 with your tags and the PIIX4_IDE fix.

Quoted 28 lines

>
>     - Removed the vmcoreinfo conversion (elmarco) but add a comment. >     - Added Igor's R-b tag.
>
>     Following the thread discussion between Peter/Markus/Damien about >     reset handlers:
> https://www.mail-archive.com/[email protected]/msg617103.html
>     I started to remove qemu_register_reset() calls from few
qdevified
>     devices (the trivial ones).
>
>     Regards,
>
>     Phil.
>
>     v1:
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg06367.html
>
>     Philippe Mathieu-Daudé (8):
>        hw/acpi/piix4: Convert reset handler to DeviceReset >        hw/isa/piix4: Convert reset handler to DeviceReset >        hw/ide/piix: Convert reset handler to DeviceReset >        hw/ide/sii3112: Convert reset handler to DeviceReset >        hw/ide/via82c: Convert reset handler to DeviceReset >        hw/isa/vt82c686: Convert reset handler to DeviceReset >        hw/input/lm832x: Convert reset handler to DeviceReset >        hw/misc/vmcoreinfo: Document its reset handler