pico-imx7d: Remove specific code for fitImage
PATCH 1/1 pico-imx7d: Remove specific code for fitImage
This implementation is a specific utilisation with CONFIG_FIT. This feature use script for boot. With distrobootcmd is possible to load script.
Signed-off-by Joris Offouga <[email protected]>
--- include/configs/pico-imx7d.h | 30 ------------------------------ 1 file changed, 30 deletions(-)
include/configs/pico-imx7d.h +0 -30
@@ -45,21 +45,6 @@"/boot/imx7d-pico-pi.dtb ext4 0 1;" \"rootfs part 0 1\0" \ -/* When booting with FIT specify the node entry containing boot.scr */ -#if defined(CONFIG_FIT ) -#define PICO_BOOT_ENV \ - "bootscr_fitimage_name=bootscr\0" \ - "bootscriptaddr=0x83200000\0" \ - "fdtovaddr=0x83100000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "rootwait rw;\0" \ - "loadbootscript=" \ - "load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${bootscriptaddr}:${bootscr_fitimage_name}\0" -#else #define PICO_BOOT_ENV \"bootmenu_0=Boot using PICO-Hobbit baseboard=" \"setenv fdtfile imx7d-pico-hobbit.dtb\0" \
@@ -70,8 +55,6 @@"bootmenu_3=Boot using PICO-Pi baseboard=" \"setenv fdtfile imx7d-pico-pi.dtb\0" \ BOOTENV -#endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
@@ -105,19 +88,6 @@"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ PICO_BOOT_ENV -#if defined(CONFIG_FIT ) -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "iminfo ${bootscriptaddr};" \ - "if test $? -eq 1; then hab_failsafe; fi;" \ - "run bootscript; " \ - "else " \ - "echo Fail to load fitImage with boot script;" \ - "hab_failsafe;" \ - "fi; " \ - "fi"#endif #define BOOT_TARGET_DEVICES (func) \
Signature · 1 line
2.17.1
PATCH 1/1 pico-imx7d: Remove specific code for fitImage
Quoted 6 lines · Joris Offouga
This implementation is a specific utilisation with
CONFIG_FIT. This feature use script for boot. With distrobootcmd is possible to load script.Signed-off-by Joris Offouga <[email protected]>
Reviewed-by Otavio Salvador <[email protected]>
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750