Skip to contentSkip to conversation

pico-imx7d: Remove specific code for fitImage

PATCH Superseded Joris Offouga 2 participants 2 messages Oct 13, 2019 Arm i.MX and Layerscape

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pico-imx7d: Remove specific code for fitImage

This implementation is a specific utilisation with CONFIG_FIT. This feature use script for boot. With distrobootcmd is possible to load script.

---
 include/configs/pico-imx7d.h | 30 ------------------------------
 1 file changed, 30 deletions(-)
include/configs/pico-imx7d.h +0 -30
index 5abf80a292..26eef59393 100644
@@ -45,21 +45,6 @@
 		"/boot/imx7d-pico-pi.dtb ext4 0 1;" \
 		"rootfs part 0 1\0" \
 
-/* When booting with FIT specify the node entry containing boot.scr */
-#if defined(CONFIG_FIT)
-#define PICO_BOOT_ENV \
-	"bootscr_fitimage_name=bootscr\0" \
-	"bootscriptaddr=0x83200000\0" \
-	"fdtovaddr=0x83100000\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"rootwait rw;\0" \
-	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-	"source ${bootscriptaddr}:${bootscr_fitimage_name}\0"
-#else
 #define PICO_BOOT_ENV \
 	"bootmenu_0=Boot using PICO-Hobbit baseboard=" \
 		"setenv fdtfile imx7d-pico-hobbit.dtb\0" \
@@ -70,8 +55,6 @@
 	"bootmenu_3=Boot using PICO-Pi baseboard=" \
 		"setenv fdtfile imx7d-pico-pi.dtb\0" \
 	BOOTENV
-#endif
-
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
@@ -105,19 +88,6 @@
 	"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
 	PICO_BOOT_ENV
 
-#if defined(CONFIG_FIT)
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev};" \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"iminfo ${bootscriptaddr};" \
-			"if test $? -eq 1; then hab_failsafe; fi;" \
-			"run bootscript; " \
-		"else " \
-			"echo Fail to load fitImage with boot script;" \
-			"hab_failsafe;" \
-		"fi; " \
-	"fi"
 #endif
 
 #define BOOT_TARGET_DEVICES(func) \
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 pico-imx7d: Remove specific code for fitImage

Quoted 6 lines · Joris Offouga

This implementation is a specific utilisation with CONFIG_FIT. This feature use script for boot. With distrobootcmd is possible to load script.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750