Support distro boot in pico-imx7d BL33 case
Subsystems (2)
cover Support distro boot in pico-imx7d BL33 case
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definition
arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37 +++++++++++------------------------ 3 files changed, 13 insertions(+), 43 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/3 pico-imx7d: add config to enable CAAM
Add config to enable CAAM so that hardware random number generator works.
--- configs/pico-imx7d_bl33_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/pico-imx7d_bl33_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SECURE_BOOT=y CONFIG_TARGET_PICO_IMX7D=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y
Signature · 1 line
2.7.4
PATCH 2/3 pico-imx7d: Support distro boot for FIT image case
In reply to Jun NieSupport distro boot for pico imx7d in FIT image case.
--- include/configs/pico-imx7d.h | 37 +++++++++++-------------------------- 1 file changed, 11 insertions(+), 26 deletions(-)
include/configs/pico-imx7d.h +11 -26
@@ -55,17 +55,17 @@/* When booting with FIT specify the node entry containing boot.scr */ #if defined(CONFIG_FIT )#define PICO_BOOT_ENV \ - "bootscr_fitimage_name=bootscr\0" \ - "bootscriptaddr=0x83200000\0" \ - "fdtovaddr=0x83100000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "rootwait rw;\0" \ - "loadbootscript=" \ - "load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${bootscriptaddr}:${bootscr_fitimage_name}\0" + BOOTENV \ + "fdtovaddr=0x83100000\0" \ + "scriptaddr=0x83200000\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "rootwait rw\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "iminfo ${scriptaddr};" \ + "if test $? -eq 1; then hab_failsafe; fi;" \ + "source ${scriptaddr}:bootscr\0"#else #define PICO_BOOT_ENV \ "bootmenu_0=Boot using PICO-Hobbit baseboard=" \
@@ -107,21 +107,6 @@"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ PICO_BOOT_ENV -#if defined(CONFIG_FIT ) -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "iminfo ${bootscriptaddr};" \ - "if test $? -eq 1; then hab_failsafe; fi;" \ - "run bootscript; " \ - "else " \ - "echo Fail to load fitImage with boot script;" \ - "hab_failsafe;" \ - "fi; " \ - "fi" -#endif -#define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \
Signature · 1 line
2.7.4
PATCH 2/3 pico-imx7d: Support distro boot for FIT image case
Hi Jun,
Quoted 66 lines · Jun Nie
Support distro boot for pico imx7d in FIT image case.
Signed-off-by Jun Nie <[email protected]>--- include/configs/pico-imx7d.h | 37 +++++++++++-------------------------- 1 file changed, 11 insertions(+), 26 deletions(-)include/configs/pico-imx7d.h +11
-11@@ -55,17 +55,17 @@/* When booting with FIT specify the node entry containing boot.scr */ #if defined(CONFIG_FIT )#define PICO_BOOT_ENV \ - "bootscr_fitimage_name=bootscr\0" \ - "bootscriptaddr=0x83200000\0" \ - "fdtovaddr=0x83100000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "rootwait rw;\0" \ - "loadbootscript=" \ - "load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${bootscriptaddr}:${bootscr_fitimage_name}\0" + BOOTENV \ + "fdtovaddr=0x83100000\0" \ + "scriptaddr=0x83200000\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "rootwait rw\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "iminfo ${scriptaddr};" \ + "if test $? -eq 1; then hab_failsafe; fi;" \ + "source ${scriptaddr}:bootscr\0"#else #define PICO_BOOT_ENV \"bootmenu_0=Boot using PICO-Hobbit baseboard=" \include/configs/pico-imx7d.h +0
-16@@ -107,21 +107,6 @@"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ PICO_BOOT_ENV -#if defined(CONFIG_FIT ) -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "iminfo ${bootscriptaddr};" \ - "if test $? -eq 1; then hab_failsafe; fi;" \ - "run bootscript; " \ - "else " \ - "echo Fail to load fitImage with boot script;" \ - "hab_failsafe;" \ - "fi; " \ - "fi" -#endif -#define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ --2.7.4
Quoted 1 line
It's work from my side
for my setup i disable iminfo and hab_failsafe
See log:
run bootcmd
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
245 bytes read in 8 ms (29.3 KiB/s) Unknown command 'iminfo' - try 'help' Unknown command 'hab_failsafe' - try 'help' ## Executing script at 83200000
8961308 bytes read in 217 ms (39.4 MiB/s) ## Loading kernel from FIT Image at 86000000 ...
Using 'conf at imx7d-pico-pi.dtb' configuration Trying 'kernel at 1' kernel subimage
Description: Linux kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x86000114
Data Size: 8925040 Bytes = 8.5 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80008000
Entry Point: 0x80008000
Hash algo: sha1
Hash value: 7d8af1016b4cf8ea90fa1a767bfbeda052043f6c Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 86000000 ...
Using 'conf at imx7d-pico-pi.dtb' configuration Trying 'fdt at imx7d-pico-pi.dtb' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x86883188
Data Size: 34325 Bytes = 33.5 KiB Architecture: ARM
Hash algo: sha1
Hash value: 75c81556e9bb9681cd14c96c4627da04205b2583
Verifying Hash Integrity ... sha1+ OK Booting using the fdt blob at 0x86883188 Loading Kernel Image ... OK
Using Device Tree in place at 86883188, end 8688e79c
Starting kernel ...
Best Regards,
Joris Offouga
Quoted 5 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 2/3 pico-imx7d: Support distro boot for FIT image case
In reply to Jun NieQuoted 3 lines
Support distro boot for pico imx7d in FIT image case.
Signed-off-by Jun Nie <[email protected]>Tested-by Joris Offouga <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 3/3 pico-imx7d: polish uart clock id definition
In reply to Jun NiePolish uart clock id definition. Default IMX7 UART ID is UART1 as original parameter in imx_get_uartclk().
--- arch/arm/include/asm/arch-mx7/clock.h | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)
arch/arm/include/asm/arch-mx7/clock.h +1 -17
@@ -175,23 +175,7 @@ enum clk_root_index { CLK_ROOT_MAX, }; -#if (CONFIG_CONS_INDEX ==0 ) -#define UART_CLK_ROOT UART1_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==1 ) -#define UART_CLK_ROOT UART2_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==2 ) -#define UART_CLK_ROOT UART3_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==3 ) -#define UART_CLK_ROOT UART4_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==4 ) -#define UART_CLK_ROOT UART5_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==5 ) -#define UART_CLK_ROOT UART6_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==6 ) -#define UART_CLK_ROOT UART7_CLK_ROOT -#else -#error "Invalid IMX UART ID for serial console is defined" -#endif +#define UART_CLK_ROOT (UART1_CLK_ROOT + CONFIG_CONS_INDEX)struct clk_root_setting {enum clk_root_index root;
Signature · 1 line
2.7.4
PATCH 3/3 pico-imx7d: polish uart clock id definition
Hi Jun,
I am just trying to check if some patch was silently lost, I found yours:
Quoted 28 lines · Jun Nie
Polish uart clock id definition. Default IMX7 UART ID is UART1 as original parameter in
imx_get_uartclk().Signed-off-by Jun Nie <[email protected]>--- arch/arm/include/asm/arch-mx7/clock.h | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)arch/arm/include/asm/arch-mx7/clock.h +0
-11@@ -175,23 +175,7 @@ enum clk_root_index { CLK_ROOT_MAX, }; -#if (CONFIG_CONS_INDEX ==0 ) -#define UART_CLK_ROOT UART1_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==1 ) -#define UART_CLK_ROOT UART2_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==2 ) -#define UART_CLK_ROOT UART3_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==3 ) -#define UART_CLK_ROOT UART4_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==4 ) -#define UART_CLK_ROOT UART5_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==5 )
arch/arm/include/asm/arch-mx7/clock.h enum clk_root_index { · line 181
Quoted 10 lines
arch/arm/include/asm/arch-mx7/clock.h +1
-6-#define UART_CLK_ROOT UART6_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==6 ) -#define UART_CLK_ROOT UART7_CLK_ROOT -#else -#error "Invalid IMX UART ID for serial console is defined" -#endif +#define UART_CLK_ROOT (UART1_CLK_ROOT + CONFIG_CONS_INDEX)struct clk_root_setting {enum clk_root_index root;
It looks ok but CONFIG_CONS_INDEX *must* be set, else it breaks boards. Patch breaks at least the colibri boards.
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 3/3 pico-imx7d: polish uart clock id definition
Quoted 48 lines · Stefano Babic <[email protected]> 于2019年10月13日周日 下午9:35写道:
Hi Jun,
I am just trying to check if some patch was silently lost, I found yours:
Quoted 28 lines · Jun Nie
Polish uart clock id definition. Default IMX7 UART ID is UART1 as original parameter in
imx_get_uartclk().Signed-off-by Jun Nie <[email protected]>--- arch/arm/include/asm/arch-mx7/clock.h | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)arch/arm/include/asm/arch-mx7/clock.h +0
-11@@ -175,23 +175,7 @@ enum clk_root_index { CLK_ROOT_MAX, }; -#if (CONFIG_CONS_INDEX ==0 ) -#define UART_CLK_ROOT UART1_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==1 ) -#define UART_CLK_ROOT UART2_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==2 ) -#define UART_CLK_ROOT UART3_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==3 ) -#define UART_CLK_ROOT UART4_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==4 ) -#define UART_CLK_ROOT UART5_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==5 )arch/arm/include/asm/arch-mx7/clock.h enum clk_root_index { · line 181
Quoted 10 lines
arch/arm/include/asm/arch-mx7/clock.h +1
-6-#define UART_CLK_ROOT UART6_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==6 ) -#define UART_CLK_ROOT UART7_CLK_ROOT -#else -#error "Invalid IMX UART ID for serial console is defined" -#endif +#define UART_CLK_ROOT (UART1_CLK_ROOT + CONFIG_CONS_INDEX)struct clk_root_setting {enum clk_root_index root;It looks ok but
CONFIG_CONS_INDEX*must* be set, else it breaks boards. Patch breaks at least the colibri boards.
Quoted 2 lines
Best regards,
Stefano
Thanks for finding the bug! I will test more boards in next round. This patch is an independent optimization patch to other patches. So I will sumit next version later.
Regards,
Jun
PATCH 3/3 pico-imx7d: polish uart clock id definition
Quoted 49 lines · Jun Nie
Quoted 48 lines · Stefano Babic <[email protected]> 于2019年10月13日周日 下午9:35写道:
Hi Jun,
I am just trying to check if some patch was silently lost, I found yours:
Quoted 28 lines · Jun Nie
Polish uart clock id definition. Default IMX7 UART ID is UART1 as original parameter in
imx_get_uartclk().Signed-off-by Jun Nie <[email protected]>--- arch/arm/include/asm/arch-mx7/clock.h | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)arch/arm/include/asm/arch-mx7/clock.h +0
-11@@ -175,23 +175,7 @@ enum clk_root_index { CLK_ROOT_MAX, }; -#if (CONFIG_CONS_INDEX ==0 ) -#define UART_CLK_ROOT UART1_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==1 ) -#define UART_CLK_ROOT UART2_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==2 ) -#define UART_CLK_ROOT UART3_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==3 ) -#define UART_CLK_ROOT UART4_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==4 ) -#define UART_CLK_ROOT UART5_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==5 )arch/arm/include/asm/arch-mx7/clock.h enum clk_root_index { · line 181
Quoted 10 lines
arch/arm/include/asm/arch-mx7/clock.h +1
-6-#define UART_CLK_ROOT UART6_CLK_ROOT -#elif (CONFIG_CONS_INDEX ==6 ) -#define UART_CLK_ROOT UART7_CLK_ROOT -#else -#error "Invalid IMX UART ID for serial console is defined" -#endif +#define UART_CLK_ROOT (UART1_CLK_ROOT + CONFIG_CONS_INDEX)struct clk_root_setting {enum clk_root_index root;It looks ok but
CONFIG_CONS_INDEX*must* be set, else it breaks boards. Patch breaks at least the colibri boards.
Quoted 6 lines
Quoted 2 lines
Best regards,
StefanoThanks for finding the bug! I will test more boards in next round. This patch is an independent optimization patch to other patches. So I will sumit next version later.
Ok, thanks !
Regards,
Stefano
Quoted 4 lines
Regards,
Jun
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
cover Support distro boot in pico-imx7d BL33 case
In reply to Jun NieQuoted 5 lines · Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写道:
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Hi,
any comments?
Thanks!
Jun
cover Support distro boot in pico-imx7d BL33 case
In reply to Jun NieQuoted 10 lines · Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写道:
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definition
Quoted 6 lines
arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37 +++++++++++------------------------ 3 files changed, 13 insertions(+), 43 deletions(-)--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it now? Thanks!
Best Regards
Jun
cover Support distro boot in pico-imx7d BL33 case
Quoted 17 lines · Jun Nie <[email protected]> 于2019年8月8日周四 下午12:04写道:
Quoted 15 lines · Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写道:
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definitionarch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37 +++++++++++------------------------ 3 files changed, 13 insertions(+), 43 deletions(-)
Quoted 8 lines
Quoted 1 line
--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it now? Thanks!
Best Regards
Jun
Hi,
Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks!
Regards,
Jun
cover Support distro boot in pico-imx7d BL33 case
Hi Jun,
Quoted 28 lines
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Quoted 7 lines · Jun Nie <[email protected]> 于2019年8月8日周四 下午12:04写道:
Quoted 5 lines · Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写道:
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Quoted 8 lines
Quoted 8 lines
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definitionarch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37+++++++++++------------------------
Quoted 7 lines
Quoted 3 lines
3 files changed, 13 insertions(+), 43 deletions(-)--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it now?
Thanks!
Quoted 1 line
Quoted 7 lines
Quoted 2 lines
Best Regards
JunHi,
Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks!
I could merge this patchset into nxp-imx and send pull request to Stefano, if you are fine with that.
Regards,
Peng.
Quoted 3 lines
Regards,
Jun
cover Support distro boot in pico-imx7d BL33 case
Quoted 36 lines · Peng Fan <[email protected]> 于2019年9月3日周二 上午9:39写道:
Hi Jun,
Quoted 33 lines
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Quoted 7 lines · Jun Nie <[email protected]> 于2019年8月8日周四 下午12:04写道:
Quoted 5 lines · Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写道:
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Quoted 8 lines
Quoted 8 lines
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definitionarch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37+++++++++++------------------------
Quoted 7 lines
Quoted 3 lines
3 files changed, 13 insertions(+), 43 deletions(-)--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it now?
Thanks!
Quoted 3 lines
Best Regards
JunHi,
Quoted 8 lines
Quoted 2 lines
Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks!
I could merge this patchset into nxp-imx and send pull request to Stefano, if you are fine with that.
Regards,
Peng.
Hi Peng,
I am fine. Thank you!
Jun
Quoted 4 lines
Quoted 4 lines
Regards,
Jun
cover Support distro boot in pico-imx7d BL33 case
In reply to Peng FanQuoted 36 lines · Peng Fan <[email protected]> 于2019年9月3日周二 上午9:39写道:
Hi Jun,
Quoted 33 lines
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Quoted 7 lines · Jun Nie <[email protected]> 于2019年8月8日周四 下午12:04写道:
Quoted 5 lines · Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写道:
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Quoted 8 lines
Quoted 8 lines
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definitionarch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37+++++++++++------------------------
Quoted 7 lines
Quoted 3 lines
3 files changed, 13 insertions(+), 43 deletions(-)--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it now?
Thanks!
Quoted 3 lines
Best Regards
JunHi,
Quoted 8 lines
Quoted 2 lines
Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks!
I could merge this patchset into nxp-imx and send pull request to Stefano, if you are fine with that.
Regards,
Peng.
Peng,
It is appreciated to help on this. Any comments from Stefan? Thanks!
Regards,
Jun
Quoted 4 lines
Quoted 4 lines
Regards,
Jun
cover Support distro boot in pico-imx7d BL33 case
Quoted 57 lines
-----Original Message-----
From: Jun Nie <[email protected]>
Sent: 2019年9月9日 21:47
To: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>; Fabio Estevam <[email protected]>; Otavio Salvador <[email protected]>; Vanessa Maegima <[email protected]>; Bryan O'Donoghue <[email protected]>; U-Boot Mailing List <[email protected]>
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 caseQuoted 8 lines · Peng Fan <[email protected]> 于2019年9月3日周二 上午9:39写道:
Hi Jun,
Quoted 5 lines
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Quoted 2 lines · Jun Nie <[email protected]> 于2019年8月8日周四 下午12:04写道:
Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写
道:
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definitionarch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37Quoted 8 lines
Quoted 8 lines
+++++++++++------------------------
Quoted 7 lines
Quoted 3 lines
3 files changed, 13 insertions(+), 43 deletions(-)--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it
now?
Quoted 13 lines
Quoted 9 lines
Thanks!
Quoted 3 lines
Best Regards
JunHi,
Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks!
I could merge this patchset into nxp-imx and send pull request to Stefano, if you are fine with that.
Quoted 6 lines
Quoted 2 lines
Regards,
Peng.Peng,
It is appreciated to help on this. Any comments from Stefan? Thanks!
CI build failed:
https://travis-ci.org/MrVan/u-boot/jobs/583445551
I need drop your patchset.
Thanks,
Peng.
Quoted 7 lines
Regards,
JunQuoted 4 lines
Quoted 4 lines
Regards,
Jun
cover Support distro boot in pico-imx7d BL33 case
Quoted 63 lines · Peng Fan <[email protected]> 于2019年9月11日周三 下午2:02写道:
Quoted 63 lines
-----Original Message-----
From: Jun Nie <[email protected]>
Sent: 2019年9月9日 21:47
To: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>; Fabio Estevam <[email protected]>; Otavio Salvador <[email protected]>; Vanessa Maegima <[email protected]>; Bryan O'Donoghue <[email protected]>; U-Boot Mailing List <[email protected]>
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 caseQuoted 8 lines · Peng Fan <[email protected]> 于2019年9月3日周二 上午9:39写道:
Hi Jun,
Quoted 5 lines
Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Quoted 2 lines · Jun Nie <[email protected]> 于2019年8月8日周四 下午12:04写道:
Jun Nie <[email protected]> 于2019年7月16日周二 下午3:43写
道:
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Support distro boot in pico-imx7d BL33 case with changing the enviroment variables. While the other two patches are for polishing clock code and for feature enablement.
Jun Nie (3):
pico-imx7d: add config to enable CAAM
pico-imx7d: Support distro boot for FIT image case
pico-imx7d: polish uart clock id definitionarch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- configs/pico-imx7d_bl33_defconfig | 1 + include/configs/pico-imx7d.h | 37Quoted 8 lines
Quoted 8 lines
+++++++++++------------------------
Quoted 7 lines
Quoted 3 lines
3 files changed, 13 insertions(+), 43 deletions(-)--
Hi Vanessa,
Do you have any comments on these 3 patches? Or we can merge it
now?
Quoted 7 lines
Quoted 7 lines
Thanks!
Quoted 3 lines
Best Regards
JunHi,
Quoted 8 lines
Quoted 2 lines
Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks!
I could merge this patchset into nxp-imx and send pull request to Stefano, if you are fine with that.
Regards,
Peng.Peng,
Quoted 8 lines
Quoted 1 line
It is appreciated to help on this. Any comments from Stefan? Thanks!
CI build failed:
https://travis-ci.org/MrVan/u-boot/jobs/583445551
I need drop your patchset.Thanks,
Peng.
Thanks for the result. Can you help to only drop the patch for polishing clock? The three patches are not tightly coupled actually.
Regards,
Jun
Quoted 8 lines
Quoted 8 lines
Regards,
JunQuoted 4 lines
Quoted 4 lines
Regards,
Jun