dt-bindings: sram: Convert SRAM bindings to json-schema
Subsystems (4)
PATCH v4 1/7 dt-bindings: sram: Convert SRAM bindings to json-schema
Convert generic mmio-sram bindings to DT schema format using json-schema. Require the address/size cells to be 1, not equal to root node. This also fixes the check for clocks property to be in main root node instead of children.
---
Changes since v3:
1. Integrate Samsung SRAM bindings here,
2. Move 'clocks' one level up (error in previous bindings),
3. Add 'additionalProperties: false',
4. Fix names of children in examples,
5. Fix children nodes address pattern,
6. Address other review comments
Changes since v2:
1. Add Rob as maintainer,
2. Use "contains" for compatible,
3. Fix address and size cells to 1,
4. Add maxitems to reg under children,
5. Remove unneeded string type from label.
Changes since v1:
1. Indent example with four spaces (more readable).
--- .../devicetree/bindings/sram/sram.txt | 80 ---------- .../devicetree/bindings/sram/sram.yaml | 137 ++++++++++++++++++ 2 files changed, 137 insertions(+), 80 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml
Documentation/devicetree/bindings/sram/sram.txt deleted +0 -80
@@ -1,80 +0,0 @@ -Generic on-chip SRAM - -Simple IO memory regions to be managed by the genalloc API. - -Required properties: - -- compatible : mmio-sram or atmel,sama5d2-securam - -- reg : SRAM iomem address range - -Reserving sram areas: ---------------------- - -Each child of the sram node specifies a region of reserved memory. Each -child node should use a 'reg' property to specify a specific range of -reserved memory. - -Following the generic-names recommended practice, node names should -reflect the purpose of the node. Unit address (@<address>) should be -appended to the name. - -Required properties in the sram node: - -- #address-cells, #size-cells : should use the same values as the root node -- ranges : standard definition, should translate from local addresses - within the sram to bus addresses - -Optional properties in the sram node: - -- no-memory-wc : the flag indicating, that SRAM memory region has not to - be remapped as write combining. WC is used by default. - -Required properties in the area nodes: - -- reg : iomem address range, relative to the SRAM range - -Optional properties in the area nodes: - -- compatible : standard definition, should contain a vendor specific string - in the form <vendor>,[<device>-]<usage> -- pool : indicates that the particular reserved SRAM area is addressable - and in use by another device or devices -- export : indicates that the reserved SRAM area may be accessed outside - of the kernel, e.g. by bootloader or userspace -- protect-exec : Same as 'pool' above but with the additional - constraint that code wil be run from the region and - that the memory is maintained as read-only, executable - during code execution. NOTE: This region must be page - aligned on start and end in order to properly allow - manipulation of the page attributes. -- label : the name for the reserved partition, if omitted, the label - is taken from the node name excluding the unit address. -- clocks : a list of phandle and clock specifier pair that controls the - single SRAM clock. - -Example: - -sram: sram@5c000000 { - compatible = "mmio-sram"; - reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5c000000 0x40000>; - - smp-sram@100 { - compatible = "socvendor,smp-sram"; - reg = <0x100 0x50>; - }; - - device-sram@1000 { - reg = <0x1000 0x1000>; - pool; - }; - - exported@20000 { - reg = <0x20000 0x20000>; - export; - }; -};
Documentation/devicetree/bindings/sram/sram.yaml new file +137 -0
137 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v4 2/7 dt-bindings: sram: Merge Samsung SRAM bindings into generic
The Samsung SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
---
Changes since v3:
1. New patch
--- .../devicetree/bindings/sram/samsung-sram.txt | 38 ------------------- .../devicetree/bindings/sram/sram.yaml | 29 ++++++++++++++ MAINTAINERS | 1 - 3 files changed, 29 insertions(+), 39 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/samsung-sram.txt
Documentation/devicetree/bindings/sram/samsung-sram.txt deleted +0 -38
@@ -1,38 +0,0 @@ -Samsung Exynos SYSRAM for SMP bringup: ------------------------------------- - -Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup -of the secondary cores. Once the core gets powered up it executes the -code that is residing at some specific location of the SYSRAM. - -Therefore reserved section sub-nodes have to be added to the mmio-sram -declaration. These nodes are of two types depending upon secure or -non-secure execution environment. - -Required sub-node properties: -- compatible : depending upon boot mode, should be - "samsung,exynos4210-sysram" : for Secure SYSRAM - "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM - -The rest of the properties should follow the generic mmio-sram discription -found in Documentation/devicetree/bindings/sram/sram.txt - -Example: - - sysram@2020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x54000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x54000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@53000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x53000 0x1000>; - }; - };
Documentation/devicetree/bindings/sram/sram.yaml +29 -0
@@ -64,6 +64,9 @@ patternProperties: description: Should contain a vendor specific string in the form <vendor>,[<device>-]<usage> + enum: + - samsung,exynos4210-sysram + - samsung,exynos4210-sysram-ns reg: description:
@@ -135,3 +138,29 @@ examples: export; }; }; + + - | + // Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup + // of the secondary cores. Once the core gets powered up it executes the + // code that is residing at some specific location of the SYSRAM. + // + // Therefore reserved section sub-nodes have to be added to the mmio-sram + // declaration. These nodes are of two types depending upon secure or + // non-secure execution environment. + sram@2020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + };
MAINTAINERS +0 -1
@@ -2235,7 +2235,6 @@ F: drivers/soc/samsung/ F: include/linux/soc/samsung/ F: Documentation/arm/samsung/ F: Documentation/devicetree/bindings/arm/samsung/ -F: Documentation/devicetree/bindings/sram/samsung-sram.txt F: Documentation/devicetree/bindings/power/pd-samsung.txt N: exynos
Signature · 1 line
2.17.1
PATCH v4 3/7 dt-bindings: sram: Merge Amlogic SRAM bindings into generic
In reply to Krzysztof KozlowskiThe Amlogic SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
---
Changes since v3:
1. New patch
--- .../bindings/arm/amlogic/smp-sram.txt | 32 ------------------- .../devicetree/bindings/sram/sram.yaml | 22 +++++++++++++ 2 files changed, 22 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt
Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt deleted +0 -32
@@ -1,32 +0,0 @@ -Amlogic Meson8 and Meson8b SRAM for smp bringup: ------------------------------------------------- - -Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. -Once the core gets powered up it executes the code that is residing at a -specific location. - -Therefore a reserved section sub-node has to be added to the mmio-sram -declaration. - -Required sub-node properties: -- compatible : depending on the SoC this should be one of: - "amlogic,meson8-smp-sram" - "amlogic,meson8b-smp-sram" - -The rest of the properties should follow the generic mmio-sram discription -found in ../../misc/sram.txt - -Example: - - sram: sram@d9000000 { - compatible = "mmio-sram"; - reg = <0xd9000000 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xd9000000 0x20000>; - - smp-sram@1ff80 { - compatible = "amlogic,meson8b-smp-sram"; - reg = <0x1ff80 0x8>; - }; - };
Documentation/devicetree/bindings/sram/sram.yaml +22 -0
@@ -65,6 +65,8 @@ patternProperties: Should contain a vendor specific string in the form <vendor>,[<device>-]<usage> enum: + - amlogic,meson8-smp-sram + - amlogic,meson8b-smp-sram - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns
@@ -164,3 +166,23 @@ examples: reg = <0x53000 0x1000>; }; }; + + - | + // Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. + // Once the core gets powered up it executes the code that is residing at a + // specific location. + // + // Therefore a reserved section sub-node has to be added to the mmio-sram + // declaration. + sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; + };
Signature · 1 line
2.17.1
PATCH v4 4/7 dt-bindings: sram: Merge Renesas SRAM bindings into generic
In reply to Krzysztof KozlowskiThe Renesas SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
---
Changes since v3:
1. New patch
--- .../bindings/sram/renesas,smp-sram.txt | 27 ------------------- .../devicetree/bindings/sram/sram.yaml | 15 +++++++++++ 2 files changed, 15 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt
Documentation/devicetree/bindings/sram/renesas,smp-sram.txt deleted +0 -27
@@ -1,27 +0,0 @@ -* Renesas SMP SRAM - -Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub -for secondary CPU bringup and CPU hotplug. -This memory is reserved by adding a child node to a "mmio-sram" node, cfr. -Documentation/devicetree/bindings/sram/sram.txt. - -Required child node properties: - - compatible: Must be "renesas,smp-sram", - - reg: Address and length of the reserved SRAM. - The full physical (bus) address must be aligned to a 256 KiB boundary. - - -Example: - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - }; - };
Documentation/devicetree/bindings/sram/sram.yaml +15 -0
@@ -67,6 +67,7 @@ patternProperties: enum: - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram + - renesas,smp-sram - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns
@@ -186,3 +187,17 @@ examples: reg = <0x1ff80 0x8>; }; }; + + - | + sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0xe63c0000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + };
Signature · 1 line
2.17.1
Re: [PATCH v4 4/7] dt-bindings: sram: Merge Renesas SRAM bindings into generic
Hi Krzysztof,
Quoted 4 lines · Krzysztof Kozlowski
The Renesas SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Thanks for your patch, whcih is now commit 0759b09eadd0d9a1 ("dt-bindings:
sram: Merge Renesas SRAM bindings into generic") in Rob's for-next branch.
Quoted 34 lines
Documentation/devicetree/bindings/sram/renesas,smp-sram.txt deleted +0
-26@@ -1,27 +0,0 @@ -* Renesas SMP SRAM - -Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub -for secondary CPU bringup and CPU hotplug. -This memory is reserved by adding a child node to a "mmio-sram" node, cfr. -Documentation/devicetree/bindings/sram/sram.txt. - -Required child node properties: - - compatible: Must be "renesas,smp-sram", - - reg: Address and length of the reserved SRAM. - The full physical (bus) address must be aligned to a 256 KiB boundary. - - -Example: - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - };
Documentation/devicetree/bindings/sram/sram.yaml examples: · line 194
Quoted 8 lines
Documentation/devicetree/bindings/sram/sram.yaml +5
-0@@ -186,3 +187,17 @@ examples: reg = <0x1ff80 0x8>; }; }; + + - | + sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0xe63c0000 0x1000>;
Is there any specific reason you converted the example from 64-bit to 32-bit addressing?
All Renesas SoCs using this have #address-cells and #size-cells = <2>.
Thanks!
Documentation/devicetree/bindings/sram/sram.yaml examples: · line 203
Quoted 9 lines
Documentation/devicetree/bindings/sram/sram.yaml +9
-0+ #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + };
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Re: [PATCH v4 4/7] dt-bindings: sram: Merge Renesas SRAM bindings into generic
Quoted 45 lines · Geert Uytterhoeven
Hi Krzysztof,
Quoted 4 lines · Krzysztof Kozlowski
The Renesas SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
Signed-off-by Krzysztof Kozlowski <[email protected]>Thanks for your patch, whcih is now commit
0759b09eadd0d9a1("dt-bindings:
sram: Merge Renesas SRAM bindings into generic") in Rob's for-next branch.Quoted 32 lines
Documentation/devicetree/bindings/sram/renesas,smp-sram.txt deleted +0
-26@@ -1,27 +0,0 @@ -* Renesas SMP SRAM - -Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub -for secondary CPU bringup and CPU hotplug. -This memory is reserved by adding a child node to a "mmio-sram" node, cfr. -Documentation/devicetree/bindings/sram/sram.txt. - -Required child node properties: - - compatible: Must be "renesas,smp-sram", - - reg: Address and length of the reserved SRAM. - The full physical (bus) address must be aligned to a 256 KiB boundary. - - -Example: - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - };Documentation/devicetree/bindings/sram/sram.yaml +0
-0
Quoted 13 lines
Documentation/devicetree/bindings/sram/sram.yaml examples: · line 194
Quoted 9 lines
Documentation/devicetree/bindings/sram/sram.yaml +5
-0@@ -186,3 +187,17 @@ examples: reg = <0x1ff80 0x8>; }; }; + + - | + sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0xe63c0000 0x1000>;Is there any specific reason you converted the example from 64-bit to 32-bit addressing?
All Renesas SoCs using this have #address-cells and #size-cells = <2>.
I should mention it in commit msg. The reason is because examples are compiled inside a {} with address/size cells of 1. Instead of conversion maybe it would be reasonable to put it inside additional node adjusting the address/size cells.
Best regards,
Krzysztof
Re: [PATCH v4 4/7] dt-bindings: sram: Merge Renesas SRAM bindings into generic
Hi Krzysztof,
Quoted 57 lines · Krzysztof Kozlowski
Quoted 42 lines · Geert Uytterhoeven
Quoted 4 lines · Krzysztof Kozlowski
The Renesas SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
Signed-off-by Krzysztof Kozlowski <[email protected]>Thanks for your patch, whcih is now commit
0759b09eadd0d9a1("dt-bindings:
sram: Merge Renesas SRAM bindings into generic") in Rob's for-next branch.Quoted 32 lines
Documentation/devicetree/bindings/sram/renesas,smp-sram.txt deleted +0
-26@@ -1,27 +0,0 @@ -* Renesas SMP SRAM - -Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub -for secondary CPU bringup and CPU hotplug. -This memory is reserved by adding a child node to a "mmio-sram" node, cfr. -Documentation/devicetree/bindings/sram/sram.txt. - -Required child node properties: - - compatible: Must be "renesas,smp-sram", - - reg: Address and length of the reserved SRAM. - The full physical (bus) address must be aligned to a 256 KiB boundary. - - -Example: - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - };Documentation/devicetree/bindings/sram/sram.yaml +0
-0Quoted 13 lines
Documentation/devicetree/bindings/sram/sram.yaml examples: · line 194
Quoted 9 lines
Documentation/devicetree/bindings/sram/sram.yaml +5
-0@@ -186,3 +187,17 @@ examples: reg = <0x1ff80 0x8>; }; }; + + - | + sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0xe63c0000 0x1000>;Is there any specific reason you converted the example from 64-bit to 32-bit addressing?
All Renesas SoCs using this have #address-cells and #size-cells = <2>.
Quoted 2 lines
I should mention it in commit msg. The reason is because examples are compiled inside a {} with address/size cells of 1. Instead of
Thanks, that's what I was already afraid of...
Quoted 2 lines
conversion maybe it would be reasonable to put it inside additional node adjusting the address/size cells.
I think it's fine to leave it as-as, though. If we ever get to DT-ize secondary CPU startup on EMMA Mobile EV2 or SH-Mobile AG5, we'll have users without LPAE ;-)
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
PATCH v4 5/7 dt-bindings: sram: Merge Rockchip SRAM bindings into generic
In reply to Krzysztof KozlowskiThe Rockchip SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
---
Changes since v3:
1. New patch
--- .../bindings/sram/rockchip-smp-sram.txt | 30 ------------------- .../devicetree/bindings/sram/sram.yaml | 15 ++++++++++ 2 files changed, 15 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/rockchip-smp-sram.txt
Documentation/devicetree/bindings/sram/rockchip-smp-sram.txt deleted +0 -30
@@ -1,30 +0,0 @@ -Rockchip SRAM for smp bringup: ------------------------------- - -Rockchip's smp-capable SoCs use the first part of the sram for the bringup -of the cores. Once the core gets powered up it executes the code that is -residing at the very beginning of the sram. - -Therefore a reserved section sub-node has to be added to the mmio-sram -declaration. - -Required sub-node properties: -- compatible : should be "rockchip,rk3066-smp-sram" - -The rest of the properties should follow the generic mmio-sram discription -found in Documentation/devicetree/bindings/sram/sram.txt - -Example: - - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - smp-sram@10080000 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x10080000 0x50>; - }; - };
Documentation/devicetree/bindings/sram/sram.yaml +15 -0
@@ -68,6 +68,7 @@ patternProperties: - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram - renesas,smp-sram + - rockchip,rk3066-smp-sram - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns
@@ -201,3 +202,17 @@ examples: reg = <0 0x10>; }; }; + + - | + sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smp-sram@10080000 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x10080000 0x50>; + }; + };
Signature · 1 line
2.17.1
Re: [PATCH v4 5/7] dt-bindings: sram: Merge Rockchip SRAM bindings into generic
Am Montag, 21. Oktober 2019, 18:13:49 CEST schrieb Krzysztof Kozlowski:
Quoted 4 lines
The Rockchip SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 78 lines
---
Changes since v3:
1. New patch--- .../bindings/sram/rockchip-smp-sram.txt | 30 ------------------- .../devicetree/bindings/sram/sram.yaml | 15 ++++++++++ 2 files changed, 15 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/rockchip-smp-sram.txtDocumentation/devicetree/bindings/sram/rockchip-smp-sram.txt deleted +0
-30@@ -1,30 +0,0 @@ -Rockchip SRAM for smp bringup: ------------------------------- - -Rockchip's smp-capable SoCs use the first part of the sram for the bringup -of the cores. Once the core gets powered up it executes the code that is -residing at the very beginning of the sram. - -Therefore a reserved section sub-node has to be added to the mmio-sram -declaration. - -Required sub-node properties: -- compatible : should be "rockchip,rk3066-smp-sram" - -The rest of the properties should follow the generic mmio-sram discription -found in Documentation/devicetree/bindings/sram/sram.txt - -Example: - - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - smp-sram@10080000 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x10080000 0x50>; - }; - };Documentation/devicetree/bindings/sram/sram.yaml +15
-0@@ -68,6 +68,7 @@ patternProperties: - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram - renesas,smp-sram + - rockchip,rk3066-smp-sram - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns@@ -201,3 +202,17 @@ examples: reg = <0 0x10>; }; }; + + - | + sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smp-sram@10080000 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x10080000 0x50>; + }; + };
PATCH v4 6/7 dt-bindings: sram: Merge Allwinner SRAM bindings into generic
In reply to Krzysztof KozlowskiThe Allwinner SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
---
Changes since v3:
1. New patch
--- .../bindings/arm/sunxi/smp-sram.txt | 44 ------------------- .../devicetree/bindings/sram/sram.yaml | 25 +++++++++++ 2 files changed, 25 insertions(+), 44 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt deleted +0 -44
@@ -1,44 +0,0 @@ -Allwinner SRAM for smp bringup: ------------------------------------------------- - -Allwinner's A80 SoC uses part of the secure sram for hotplugging of the -primary core (cpu0). Once the core gets powered up it checks if a magic -value is set at a specific location. If it is then the BROM will jump -to the software entry address, instead of executing a standard boot. - -Therefore a reserved section sub-node has to be added to the mmio-sram -declaration. - -Note that this is separate from the Allwinner SRAM controller found in -../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to -any device. - -Also there are no "secure-only" properties. The implementation should -check if this SRAM is usable first. - -Required sub-node properties: -- compatible : depending on the SoC this should be one of: - "allwinner,sun9i-a80-smp-sram" - -The rest of the properties should follow the generic mmio-sram discription -found in ../../misc/sram.txt - -Example: - - sram_b: sram@20000 { - /* 256 KiB secure SRAM at 0x20000 */ - compatible = "mmio-sram"; - reg = <0x00020000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00020000 0x40000>; - - smp-sram@1000 { - /* - * This is checked by BROM to determine if - * cpu0 should jump to SMP entry vector - */ - compatible = "allwinner,sun9i-a80-smp-sram"; - reg = <0x1000 0x8>; - }; - };
Documentation/devicetree/bindings/sram/sram.yaml +25 -0
@@ -65,6 +65,7 @@ patternProperties: Should contain a vendor specific string in the form <vendor>,[<device>-]<usage> enum: + - allwinner,sun9i-a80-smp-sram - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram - renesas,smp-sram
@@ -216,3 +217,27 @@ examples: reg = <0x10080000 0x50>; }; }; + + - | + // Allwinner's A80 SoC uses part of the secure sram for hotplugging of the + // primary core (cpu0). Once the core gets powered up it checks if a magic + // value is set at a specific location. If it is then the BROM will jump + // to the software entry address, instead of executing a standard boot. + // + // Also there are no "secure-only" properties. The implementation should + // check if this SRAM is usable first. + sram@20000 { + // 256 KiB secure SRAM at 0x20000 + compatible = "mmio-sram"; + reg = <0x00020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00020000 0x40000>; + + smp-sram@1000 { + // This is checked by BROM to determine if + // cpu0 should jump to SMP entry vector + compatible = "allwinner,sun9i-a80-smp-sram"; + reg = <0x1000 0x8>; + }; + };
Signature · 1 line
2.17.1
PATCH v4 7/7 dt-bindings: sram: Merge Socionext SRAM bindings into generic
In reply to Krzysztof KozlowskiThe Socionext SRAM bindings list only compatible so integrate them into generic SRAM bindings schema.
---
Changes since v3:
1. New patch
--- .../bindings/sram/milbeaut-smp-sram.txt | 24 ------------------- .../devicetree/bindings/sram/sram.yaml | 15 ++++++++++++ 2 files changed, 15 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt
Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt deleted +0 -24
@@ -1,24 +0,0 @@ -Milbeaut SRAM for smp bringup - -Milbeaut SoCs use a part of the sram for the bringup of the secondary cores. -Once they get powered up in the bootloader, they stay at the specific part -of the sram. -Therefore the part needs to be added as the sub-node of mmio-sram. - -Required sub-node properties: -- compatible : should be "socionext,milbeaut-smp-sram" - -Example: - - sram: sram@0 { - compatible = "mmio-sram"; - reg = <0x0 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x10000>; - - smp-sram@f100 { - compatible = "socionext,milbeaut-smp-sram"; - reg = <0xf100 0x20>; - }; - };
Documentation/devicetree/bindings/sram/sram.yaml +15 -0
@@ -72,6 +72,7 @@ patternProperties: - rockchip,rk3066-smp-sram - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns + - socionext,milbeaut-smp-sram reg: description:
@@ -241,3 +242,17 @@ examples: reg = <0x1000 0x8>; }; }; + + - | + sram@0 { + compatible = "mmio-sram"; + reg = <0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x10000>; + + smp-sram@f100 { + compatible = "socionext,milbeaut-smp-sram"; + reg = <0xf100 0x20>; + }; + };
Signature · 1 line
2.17.1
Quoted 24 lines · Krzysztof Kozlowski
Convert generic mmio-sram bindings to DT schema format using json-schema. Require the address/size cells to be 1, not equal to root node. This also fixes the check for clocks property to be in main root node instead of children.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v3:
1. Integrate Samsung SRAM bindings here,
2. Move 'clocks' one level up (error in previous bindings),
3. Add 'additionalProperties: false',
4. Fix names of children in examples,
5. Fix children nodes address pattern,
6. Address other review commentsChanges since v2:
1. Add Rob as maintainer,
2. Use "contains" for compatible,
3. Fix address and size cells to 1,
4. Add maxitems to reg under children,
5. Remove unneeded string type from label.
Quoted 9 lines
Changes since v1:
1. Indent example with four spaces (more readable).--- .../devicetree/bindings/sram/sram.txt | 80 ---------- .../devicetree/bindings/sram/sram.yaml | 137 ++++++++++++++++++ 2 files changed, 137 insertions(+), 80 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml
Applied the series, thanks.
Rob