ARM: dts: imx51: Adjust CPU operating points
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/2 ARM: dts: imx51: Adjust CPU operating points
Adjust the CPU operating points as per the characterized settings from the vendor BSP at:
--- arch/arm/boot/dts/imx51.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx51.dtsi +2 -2
@@ -83,8 +83,8 @@ clocks = <&clks IMX5_CLK_CPU_PODF>; clock-names = "cpu"; operating-points = < - 166000 1000000 - 600000 1050000 + 166250 850000 + 400000 1000000 800000 1100000 >; voltage-tolerance = <5>;
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 2/2 ARM: dts: imx53: Adjust CPU operating points
Adjust the CPU operating points as per the characterized settings from the vendor BSP at:
--- arch/arm/boot/dts/imx53.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/imx53.dtsi +4 -4
@@ -58,10 +58,10 @@ voltage-tolerance = <5>; operating-points = < /* kHz */ - 166666 850000 - 400000 900000 - 800000 1050000 - 1000000 1200000 + 160000 950000 + 400000 950000 + 800000 1100000 + 1000000 1250000 1200000 1300000 >; };
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 4 lines · Fabio Estevam
Adjust the CPU operating points as per the characterized settings from the vendor BSP at:
Does it match what datasheet says?
Shawn
Quoted 24 lines
Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/imx51.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/imx51.dtsi +2
-2@@ -83,8 +83,8 @@ clocks = <&clks IMX5_CLK_CPU_PODF>; clock-names = "cpu"; operating-points = < - 166000 1000000 - 600000 1050000 + 166250 850000 + 400000 1000000 800000 1100000 >; voltage-tolerance = <5>;Signature · 1 line
2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerHi Shawn,
Quoted 8 lines · Shawn Guo
Quoted 4 lines · Fabio Estevam
Adjust the CPU operating points as per the characterized settings from the vendor BSP at:
Does it match what datasheet says?
It matches all operational points from the i.MX53 consumer datasheet.
On i.MX51 I noticed one discrepancy, so I will update it in v2.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel