Skip to contentSkip to conversation

ARM: dts: imx51: Adjust CPU operating points

PATCH In review Fabio Estevam 2 participants 4 messages Oct 28, 2019 – Oct 29, 2019

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/2 ARM: dts: imx51: Adjust CPU operating points

Adjust the CPU operating points as per the characterized settings from the vendor BSP at:

https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm/mach-mx5/mx51_babbage.c?h=imx_2.6.35_caf#n1343

---
 arch/arm/boot/dts/imx51.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx51.dtsi +2 -2
index 0a4b9a5d9a9c..eec423785849 100644
@@ -83,8 +83,8 @@
 			clocks = <&clks IMX5_CLK_CPU_PODF>;
 			clock-names = "cpu";
 			operating-points = <
-				166000	1000000
-				600000	1050000
+				166250	850000
+				400000	1000000
 				800000	1100000
 			>;
 			voltage-tolerance = <5>;
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author reviewer
#1 lore raw

PATCH 2/2 ARM: dts: imx53: Adjust CPU operating points

Adjust the CPU operating points as per the characterized settings from the vendor BSP at:

https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm/mach-mx5/mx53_wp.c?h=imx_2.6.35_caf#n120

---
 arch/arm/boot/dts/imx53.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/imx53.dtsi +4 -4
index ed341cfd9d09..eb2ec28a8d1d 100644
@@ -58,10 +58,10 @@
 			voltage-tolerance = <5>;
 			operating-points = <
 				/* kHz */
-				 166666  850000
-				 400000  900000
-				 800000 1050000
-				1000000 1200000
+				 160000  950000
+				 400000  950000
+				 800000 1100000
+				1000000 1250000
 				1200000 1300000
 			>;
 		};
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw
In reply to Fabio Estevam
Quoted 4 lines · Fabio Estevam

Adjust the CPU operating points as per the characterized settings from the vendor BSP at:

https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm/mach-mx5/mx51_babbage.c?h=imx_2.6.35_caf#n1343

Does it match what datasheet says?

Shawn

Quoted 24 lines
---
 arch/arm/boot/dts/imx51.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx51.dtsi +2 -2
index 0a4b9a5d9a9c..eec423785849 100644
@@ -83,8 +83,8 @@
 			clocks = <&clks IMX5_CLK_CPU_PODF>;
 			clock-names = "cpu";
 			operating-points = <
-				166000	1000000
-				600000	1050000
+				166250	850000
+				400000	1000000
 				800000	1100000
 			>;
 			voltage-tolerance = <5>;
Signature · 1 line
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author reviewer
#3 lore raw

Hi Shawn,

Quoted 8 lines · Shawn Guo
Quoted 4 lines · Fabio Estevam

Adjust the CPU operating points as per the characterized settings from the vendor BSP at:

https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm/mach-mx5/mx51_babbage.c?h=imx_2.6.35_caf#n1343

Does it match what datasheet says?

It matches all operational points from the i.MX53 consumer datasheet.

On i.MX51 I noticed one discrepancy, so I will update it in v2.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel