ARM: dts: dra7: add vpe nodes
Subsystems (5)
v2 cover ARM: dts: dra7: add vpe nodes
This patch series adds the needed clkctrl and ty-sysc nodes for VPE module. We also document the VPE DT bindings.
Changes since v1:
- Added a patch to update the compatible in the driver
- Removed unnededed #cell #size properties
- Updated the compatible in dtsi to match binding
- Split off the clk code into its own patch
- Added device specific prefix
- Converted binding to dt schema
Benoit Parrot (5):
dt-bindings: media: ti-vpe: Document VPE driver
clk: ti: dra7: add vpe clkctrl data
ARM: dts: dra7: add vpe clkctrl node
ARM: dts: dra7: Add ti-sysc node for VPE
media: ti-vpe: vpe: fix compatible to match bindings
.../devicetree/bindings/media/ti,vpe.yaml | 64 +++++++++++++++++++ MAINTAINERS | 1 + arch/arm/boot/dts/dra7-l4.dtsi | 28 +++++++- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 +++++- drivers/clk/ti/clk-7xx.c | 6 ++ drivers/media/platform/ti-vpe/vpe.c | 2 +- include/dt-bindings/clock/dra7.h | 10 +++ 7 files changed, 123 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/ti,vpe.yaml
Signature · 1 line
2.17.1
PATCH v2 1/5 dt-bindings: media: ti-vpe: Document VPE driver
Device Tree bindings for the Video Processing Engine (VPE).
--- .../devicetree/bindings/media/ti,vpe.yaml | 64 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/ti,vpe.yaml
Documentation/devicetree/bindings/media/ti,vpe.yaml new file +64 -0
@@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,vpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings + +maintainers: + - Benoit Parrot <[email protected]> + +description: |- + The Video Processing Engine (VPE) is a key component for image post + processing applications. VPE consist of a single memory to memory + path which can perform chroma up/down sampling, deinterlacing, + scaling and color space conversion. + +properties: + compatible: + const: ti,dra7-vpe + + reg: + items: + - description: The VPE main register region + - description: Scaler (SC) register region + - description: Color Space Conversion (CSC) register region + - description: Video Port Direct Memory Access (VPDMA) register region + + reg-names: + items: + - const: vpe_top + - const: sc + - const: csc + - const: vpdma + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vpe: vpe@489d0000 { + compatible = "ti,dra7-vpe"; + reg = <0x489d0000 0x120>, + <0x489d0700 0x80>, + <0x489d5700 0x18>, + <0x489dd000 0x400>; + reg-names = "vpe_top", + "sc", + "csc", + "vpdma"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + }; + +...
MAINTAINERS +1 -0
@@ -16316,6 +16316,7 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ S: Maintained F: drivers/media/platform/ti-vpe/ F: Documentation/devicetree/bindings/media/ti,cal.yaml +F: Documentation/devicetree/bindings/media/ti,vpe.yaml TI WILINK WIRELESS DRIVERS L: [email protected]
Signature · 1 line
2.17.1
Re: [Patch v2 1/5] dt-bindings: media: ti-vpe: Document VPE driver
Quoted 15 lines · Benoit Parrot
Device Tree bindings for the Video Processing Engine (VPE).
Signed-off-by Benoit Parrot <[email protected]>--- .../devicetree/bindings/media/ti,vpe.yaml | 64 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/ti,vpe.yamlDocumentation/devicetree/bindings/media/ti,vpe.yaml new file +0
-0
Documentation/devicetree/bindings/media/ti,vpe.yaml line 1
Quoted 1 line
Documentation/devicetree/bindings/media/ti,vpe.yaml new file +1
-0@@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0)
For new bindings:
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
With that,
Quoted 78 lines
Documentation/devicetree/bindings/media/ti,vpe.yaml new file +63
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,vpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings + +maintainers: + - Benoit Parrot <[email protected]> + +description: |- + The Video Processing Engine (VPE) is a key component for image post + processing applications. VPE consist of a single memory to memory + path which can perform chroma up/down sampling, deinterlacing, + scaling and color space conversion. + +properties: + compatible: + const: ti,dra7-vpe + + reg: + items: + - description: The VPE main register region + - description: Scaler (SC) register region + - description: Color Space Conversion (CSC) register region + - description: Video Port Direct Memory Access (VPDMA) register region + + reg-names: + items: + - const: vpe_top + - const: sc + - const: csc + - const: vpdma + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vpe: vpe@489d0000 { + compatible = "ti,dra7-vpe"; + reg = <0x489d0000 0x120>, + <0x489d0700 0x80>, + <0x489d5700 0x18>, + <0x489dd000 0x400>; + reg-names = "vpe_top", + "sc", + "csc", + "vpdma"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + }; + +...MAINTAINERS +1
-0@@ -16316,6 +16316,7 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ S: Maintained F: drivers/media/platform/ti-vpe/ F: Documentation/devicetree/bindings/media/ti,cal.yaml +F: Documentation/devicetree/bindings/media/ti,vpe.yaml TI WILINK WIRELESS DRIVERS L: [email protected]Signature · 1 line
2.17.1
PATCH v2 2/5 clk: ti: dra7: add vpe clkctrl data
In reply to Benoit ParrotAdd clkctrl data for VPE.
--- drivers/clk/ti/clk-7xx.c | 6 ++++++ include/dt-bindings/clock/dra7.h | 10 ++++++++++ 2 files changed, 16 insertions(+)
drivers/clk/ti/clk-7xx.c +6 -0
@@ -146,6 +146,11 @@ static const struct omap_clkctrl_reg_data dra7_rtc_clkctrl_regs[] __initconst = { 0 }, }; +static const struct omap_clkctrl_reg_data dra7_vpe_clkctrl_regs[]__initconst = { + {DRA7_VPE_VPE_CLKCTRL ,NULL ,CLKF_HW_SUP ,"dpll_core_h23x2_ck" }, + {0 }, +}; +static const struct omap_clkctrl_reg_data dra7_coreaon_clkctrl_regs[]__initconst = { {DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL ,NULL ,CLKF_SW_SUP ,"wkupaon_iclk_mux" }, { DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
@@ -769,6 +774,7 @@ const struct omap_clkctrl_data dra7_clkctrl_data[] __initconst = { { 0x4a005550, dra7_ipu_clkctrl_regs }, { 0x4a005620, dra7_dsp2_clkctrl_regs }, { 0x4a005720, dra7_rtc_clkctrl_regs }, + { 0x4a005760, dra7_vpe_clkctrl_regs }, { 0x4a008620, dra7_coreaon_clkctrl_regs }, { 0x4a008720, dra7_l3main1_clkctrl_regs }, { 0x4a008920, dra7_ipu2_clkctrl_regs },
include/dt-bindings/clock/dra7.h +10 -0
@@ -29,6 +29,11 @@#define DRA7_RTC_CLKCTRL_INDEX (offset) ((offset) - DRA7_RTC_CLKCTRL_OFFSET)#define DRA7_RTCSS_CLKCTRL DRA7_RTC_CLKCTRL_INDEX(0x44) +/* vpe clocks */ +#define DRA7_VPE_CLKCTRL_OFFSET 0x60 +#define DRA7_VPE_CLKCTRL_INDEX (offset) ((offset) - DRA7_VPE_CLKCTRL_OFFSET) +#define DRA7_VPE_CLKCTRL DRA7_VPE_CLKCTRL_INDEX(0x64) +/* coreaon clocks */ #define DRA7_SMARTREFLEX_MPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)#define DRA7_SMARTREFLEX_CORE_CLKCTRL DRA7_CLKCTRL_INDEX(0x38)
@@ -192,6 +197,11 @@/* rtc clocks */ #define DRA7_RTC_RTCSS_CLKCTRL DRA7_CLKCTRL_INDEX(0x44) +/* vpe clocks */ +#define DRA7_VPE_CLKCTRL_OFFSET 0x60 +#define DRA7_VPE_CLKCTRL_INDEX (offset) ((offset) - DRA7_VPE_CLKCTRL_OFFSET) +#define DRA7_VPE_VPE_CLKCTRL DRA7_VPE_CLKCTRL_INDEX(0x64) +/* coreaon clocks */ #define DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)#define DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL DRA7_CLKCTRL_INDEX(0x38)
Signature · 1 line
2.17.1
PATCH v2 3/5 ARM: dts: dra7: add vpe clkctrl node
In reply to Benoit ParrotAdd clkctrl nodes for VPE module.
--- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
arch/arm/boot/dts/dra7xx-clocks.dtsi +16 -2
@@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core {
Signature · 1 line
2.17.1
Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
Hi,
Quoted 1 line · Benoit Parrot
Add clkctrl nodes for VPE module.
Can you please add a comment describing that we currently need to use custom node names here instead of the standard naming?
I can queue this and other dts change once I have an immutable clock changes branch from Tero.
Or if Tero wants to also pick up the clock node dtsi patch I can ack it, up to Tero.
Regards,
Tony
Quoted 46 lines
Signed-off-by Benoit Parrot <[email protected]>--- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)arch/arm/boot/dts/dra7xx-clocks.dtsi +16
-2@@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl";@@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core {Signature · 1 line
2.17.1
Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
Tony Lindgren <[email protected]> wrote on Fri [2019-Nov-08 08:55:54 -0800]:
Quoted 7 lines
Hi,
Quoted 1 line · Benoit Parrot
Add clkctrl nodes for VPE module.
Can you please add a comment describing that we currently need to use custom node names here instead of the standard naming?
Tony, what do you mean "custom node name" here?
I followed the exact same syntax that was already there... confused..
Benoit
Quoted 58 lines
I can queue this and other dts change once I have an immutable clock changes branch from Tero.
Or if Tero wants to also pick up the clock node dtsi patch I can ack it, up to Tero.
Regards,
Tony
Quoted 46 lines
Signed-off-by Benoit Parrot <[email protected]>--- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)arch/arm/boot/dts/dra7xx-clocks.dtsi +16
-2@@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl";@@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core {Signature · 1 line
2.17.1
Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
Quoted 11 lines · Benoit Parrot
Tony Lindgren <[email protected]> wrote on Fri [2019-Nov-08 08:55:54 -0800]:
Quoted 7 lines
Hi,
Quoted 1 line · Benoit Parrot
Add clkctrl nodes for VPE module.
Can you please add a comment describing that we currently need to use custom node names here instead of the standard naming?
Tony, what do you mean "custom node name" here?
I followed the exact same syntax that was already there... confused..
Oh sorry for being unclear. Yeah so the conclusion of the discussion was that we still need custom node names for now.
And for patch "[PATCH] clk: ti: add clkctrl data dra7 sgx" I added you to Cc, and it has this in the patch description:
"Note that because of the current dts node name dependency for mapping to
clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes."
So can you please add something similar to your clock node patches too to explain why we cannot use standard node names there?
Regards,
Tony
PATCH v2 4/5 ARM: dts: dra7: Add ti-sysc node for VPE
In reply to Benoit ParrotAdd VPE node as a child of l4 interconnect in order for it to probe using ti-sysc.
--- arch/arm/boot/dts/dra7-l4.dtsi | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-)
arch/arm/boot/dts/dra7-l4.dtsi +25 -3
@@ -4158,12 +4158,34 @@ ranges = <0x0 0x1b0000 0x10000>; }; - target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */ - compatible = "ti,sysc"; - status = "disabled"; + target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1d0010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1d0000 0x10000>; + + vpe: vpe@0 { + compatible = "ti,dra7-vpe"; + reg = <0x0000 0x120>, + <0x0700 0x80>, + <0x5700 0x18>, + <0xd000 0x400>; + reg-names = "vpe_top", + "sc", + "csc", + "vpdma"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; };
Signature · 1 line
2.17.1
PATCH v2 5/5 media: ti-vpe: vpe: fix compatible to match bindings
In reply to Benoit ParrotUpdate the compatible string to match the updated bindings.
--- drivers/media/platform/ti-vpe/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/ti-vpe/vpe.c +1 -1
@@ -2644,7 +2644,7 @@ static int vpe_remove(struct platform_device *pdev)#if defined(CONFIG_OF )static const struct of_device_id vpe_of_match[] = { { - .compatible ="ti,vpe" , + .compatible ="ti,dra7-vpe" , }, {}, };
Signature · 1 line
2.17.1