RISC-V: virt: This is a "sifive,test1" test finisher
PATCH 1/1 RISC-V: virt: This is a "sifive,test1" test finisher
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
hw/riscv/virt.c +4 -1
@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ; +qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }qemu_fdt_setprop_cells (fdt, nodename,"reg" ,0x0 , memmap[VIRT_TEST ].base,0x0 , memmap[VIRT_TEST ].size);
Signature · 1 line
2.21.0
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0
hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;
Does this really work? Why not use qemu_fdt_setprop_cells()?
Alistair
Quoted 9 lines
hw/riscv/virt.c +2
-1+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }qemu_fdt_setprop_cells (fdt, nodename,"reg" ,0x0 , memmap[VIRT_TEST ].base,0x0 , memmap[VIRT_TEST ].size); --2.21.0
Quoted 29 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?
Quoted 4 lines
Alistair
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells() is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).
Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this. Oddly, given that it's used in the ubiquitous 'compatible' prop, the dtc Documentation/manual.txt doesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'. You have to dig through the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.
thanks
-- PMM
Palmer Dabbelt
maintainerQuoted 41 lines · Peter Maydell
Quoted 29 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?Quoted 4 lines
Alistair
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells()is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).
Quoted 9 lines
Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this. Oddly, given that it's used in the ubiquitous 'compatible' prop, the dtc
Documentation/manual.txtdoesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'. You have to dig through the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.
I copied this from hw/arm/virt.c, but messed up. There they use
const char compat[] = "arm,armv8-timer\0arm,armv7-timer";
qemu_fdt_setprop(vms->fdt, "/timer", "compatible",
compat, sizeof(compat));I'll send a v2, but I'd be happy to add some sort of setprop_stringlist function. Maybe we just indicate the length with two '\0's? IIRC that's how other similar-looking data structures are encoded.
Quoted 52 lines · Palmer Dabbelt
Quoted 41 lines · Peter Maydell
Quoted 29 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?Quoted 4 lines
Alistair
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells()is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).Quoted 9 lines
Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this. Oddly, given that it's used in the ubiquitous 'compatible' prop, the dtc
Documentation/manual.txtdoesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'. You have to dig through the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.
Quoted 5 lines
I copied this from
hw/arm/virt.c, but messed up. There they useconst char compat[] = "arm,armv8-timer\0arm,armv7-timer"; qemu_fdt_setprop(vms->fdt, "/timer", "compatible", compat, sizeof(compat));
I'm not sure what you're saying is messed up. AFAICT, this matches the code you have above, and both should be correct.
Quoted 4 lines
I'll send a v2, but I'd be happy to add some sort of
setprop_stringlistfunction. Maybe we just indicate the length with two '\0's? IIRC that's how other similar-looking data structures are encoded.
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
Quoted 53 lines · On Sun, 10 Nov 2019 13:10:33 PST (-0800), [email protected] wrote:
Quoted 52 lines · Palmer Dabbelt
Quoted 50 lines · Peter Maydell
Quoted 29 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?Quoted 4 lines
Alistair
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells()is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this. Oddly, given that it's used in the ubiquitous 'compatible' prop, the dtc
Documentation/manual.txtdoesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'. You have to dig through the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.
Quoted 8 lines
Quoted 5 lines
I copied this from
hw/arm/virt.c, but messed up. There they useconst char compat[] = "arm,armv8-timer\0arm,armv7-timer"; qemu_fdt_setprop(vms->fdt, "/timer", "compatible", compat, sizeof(compat));I'm not sure what you're saying is messed up. AFAICT, this matches the code you have above, and both should be correct.
Sorry, I must have been hallucinating. For some reason I though I wrote qemu_fdt_setprop_string(... compat).
I'd like to take this for 4.2 if possible, but I don't think I have a reviewed-by (I just got my email set up on my Google computer, so it might be messy for a bit). I'm happy to submit the cleaner valist version after 4.2, as per Peter's suggestion.
Alistair: are you OK with this?
Quoted 10 lines
Quoted 4 lines
I'll send a v2, but I'd be happy to add some sort of
setprop_stringlistfunction. Maybe we just indicate the length with two '\0's? IIRC that's how other similar-looking data structures are encoded.Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
Alistair Francis
Reviewed-byQuoted 67 lines · Palmer Dabbelt
Quoted 53 lines · On Sun, 10 Nov 2019 13:10:33 PST (-0800), [email protected] wrote:
Quoted 52 lines · Palmer Dabbelt
Quoted 50 lines · Peter Maydell
Quoted 29 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?Quoted 4 lines
Alistair
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells()is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this. Oddly, given that it's used in the ubiquitous 'compatible' prop, the dtc
Documentation/manual.txtdoesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'. You have to dig through the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.Quoted 8 lines
Quoted 5 lines
I copied this from
hw/arm/virt.c, but messed up. There they useconst char compat[] = "arm,armv8-timer\0arm,armv7-timer"; qemu_fdt_setprop(vms->fdt, "/timer", "compatible", compat, sizeof(compat));I'm not sure what you're saying is messed up. AFAICT, this matches the code you have above, and both should be correct.
Sorry, I must have been hallucinating. For some reason I though I wrote qemu_fdt_setprop_string(... compat).
Quoted 6 lines
I'd like to take this for 4.2 if possible, but I don't think I have a reviewed-by (I just got my email set up on my Google computer, so it might be messy for a bit). I'm happy to submit the cleaner valist version after 4.2, as per Peter's suggestion.
Alistair: are you OK with this?
Yeah, that works for me.
For 5.0 we can then merge Anup's patch and your series improving the multi compat support.
Alistair
Quoted 11 lines
Quoted 11 lines
Quoted 5 lines
I'll send a v2, but I'd be happy to add some sort of
setprop_stringlistfunction. Maybe we just indicate the length with two '\0's? IIRC that's how other similar-looking data structures are encoded.--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_| _way_ _around_!
Quoted 73 lines · On Thu, 21 Nov 2019 10:55:32 PST (-0800), [email protected] wrote:
Quoted 72 lines · Palmer Dabbelt
Quoted 53 lines · On Sun, 10 Nov 2019 13:10:33 PST (-0800), [email protected] wrote:
Quoted 52 lines · Palmer Dabbelt
Quoted 50 lines · Peter Maydell
Quoted 29 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?Quoted 4 lines
Alistair
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells()is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this. Oddly, given that it's used in the ubiquitous 'compatible' prop, the dtc
Documentation/manual.txtdoesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'. You have to dig through the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.Quoted 8 lines
Quoted 5 lines
I copied this from
hw/arm/virt.c, but messed up. There they useconst char compat[] = "arm,armv8-timer\0arm,armv7-timer"; qemu_fdt_setprop(vms->fdt, "/timer", "compatible", compat, sizeof(compat));I'm not sure what you're saying is messed up. AFAICT, this matches the code you have above, and both should be correct.
Sorry, I must have been hallucinating. For some reason I though I wrote qemu_fdt_setprop_string(... compat).
I'd like to take this for 4.2 if possible, but I don't think I have a reviewed-by (I just got my email set up on my Google computer, so it might be messy for a bit). I'm happy to submit the cleaner valist version after 4.2, as per Peter's suggestion.
Quoted 6 lines
Quoted 1 line
Alistair: are you OK with this?
Yeah, that works for me.
For 5.0 we can then merge Anup's patch and your series improving the multi compat support.
Sounds good. I think the syscon driver is the right way to go, but I don't think it's 4.2 material as it's all a bit late. This one at least fixes the bug where the DTS and hardware don't match.
Quoted 15 lines
Reviewed-by Alistair Francis <[email protected]>Alistair
Quoted 11 lines
Quoted 11 lines
Quoted 5 lines
I'll send a v2, but I'd be happy to add some sort of
setprop_stringlistfunction. Maybe we just indicate the length with two '\0's? IIRC that's how other similar-looking data structures are encoded.--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_| _way_ _around_!
Quoted 32 lines · Peter Maydell
Quoted 31 lines · Alistair Francis
Quoted 18 lines · Palmer Dabbelt
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board.
Fixes 9a2551ed6f ("riscv: sifive_test: Add reset functionality")Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>--- hw/riscv/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/riscv/virt.c +0
-0hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 363
Quoted 6 lines
hw/riscv/virt.c +2
-1@@ -359,7 +359,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, nodename =g_strdup_printf ("/test@%lx" , (long )memmap[VIRT_TEST ].base);qemu_fdt_add_subnode (fdt, nodename); -qemu_fdt_setprop_string (fdt, nodename,"compatible" ,"sifive,test0" ); + { +const char compat[] ="sifive,test1\0sifive,test0" ;Does this really work? Why not use
qemu_fdt_setprop_cells()?Alistair
Quoted 8 lines
Quoted 2 lines
hw/riscv/virt.c static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, · line 365
Quoted 2 lines
hw/riscv/virt.c +2
-0+qemu_fdt_setprop (fdt, nodename,"compatible" , compat,sizeof (compat)); + }
qemu_fdt_setprop_cells()is for "set this property to contain this list of 32-bit integers" (and it does a byteswap of each 32-bit value from host to BE). That's not what you want for a string (or a string list, which is what we have here).
Yes.
Quoted 2 lines
Cc'ing David Gibson who's our device tree expert to see if there's a nicer way to write this.
Not amongst the qemu wrappers AFAIK. With raw libfdt you could build it up in stages using fdt_setprop_string() followed by fdt_appendprop_string(), although that would require additional memmove()s to complete.
A stringlist setprop function using varargs might be a useful addition to libfdt. The tricky bit is that libfdt can be used in environments with no allocator, which makes implementation tricky.
Quoted 5 lines
Oddly, given that it's used in the
ubiquitous 'compatible' prop, the dtcDocumentation/manual.txtdoesn't say anything about properties being able to be 'string lists', only 'strings', '32 bit numbers', 'lists of 32-bit numbers' and 'byte sequences'.
Oof, yeah that manual hasn't really been updated for ages. That really only describes the pieces from which a property can be mode. You can then concatenate those together using ,. So in .dts you can make a string list as:
compatible = "foo", "bar";
The , is effectively a bytestring append operator.
Quoted 4 lines
You have to dig through
the header file comments to deduce that a string list is represented by a string with embedded NULs separating each list item.
Well, you can do that as well, but using commas is more common in modern dts files. The two are equivalent by construction (in .dtb properties are simply bytestrings).
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson