Skip to contentSkip to conversation

ARM: dts: am43x-vpfe/ov2659.patch

PATCH Superseded Benoit Parrot 2 participants 5 messages Nov 12, 2019

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover ARM: dts: am43x-vpfe/ov2659.patch

This patch series adds the missing camera endpoint (ov2659) as well as the required source clocks nodes for the sensor.

On the am437x-sk-evm the camera sensor is sourced from clkout1 but that clock nodes/tree was removed as it was unsed at the time, we are re-adding the needed clock nodes here.

Changes since v1:
- Fix clock name to make it generic
- Add non-standard clock node naming to commit message as per Tony's comment
- Rename all clock nodes to use '-' instead of '_'

Benoit Parrot (2):
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries

Tero Kristo (1):
ARM: dts: am43xx: add support for clkout1 clock

 arch/arm/boot/dts/am437x-sk-evm.dts  | 27 +++++++++++++-
 arch/arm/boot/dts/am43x-epos-evm.dts | 23 +++++++++++-
 arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/3 ARM: dts: am43xx: add support for clkout1 clock

From: Tero Kristo <[email protected]>

clkout1 clock node and its generation tree was missing. Add this based on the data on TRM and PRCM functional spec.

commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for clkout1 clock") which is needed for the ov2659 camera sensor clock definition hence it is being re-applied here.

Note that because of the current dts node name dependency for mapping to clock domain, we must still use "clkout1-*ck" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes.

Fixes 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes")
---
 arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
arch/arm/boot/dts/am43xx-clocks.dtsi +54 -0
index 091356f2a8c1..c726cd8dbdf1 100644
@@ -704,6 +704,60 @@
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {
Signature · 1 line
2.17.1
Acked-by on v2 1/3
#2 lore raw

Re: [Patch v2 1/3] ARM: dts: am43xx: add support for clkout1 clock

Quoted 15 lines · Benoit Parrot

From: Tero Kristo <[email protected]>

clkout1 clock node and its generation tree was missing. Add this based on the data on TRM and PRCM functional spec.

commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for clkout1 clock") which is needed for the ov2659 camera sensor clock definition hence it is being re-applied here.

Note that because of the current dts node name dependency for mapping to clock domain, we must still use "clkout1-*ck" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes.

Quoted 4 lines
Fixes 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes")

Hmm I don't think I did any work on this, the above should be:

Quoted 78 lines
---
 arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
arch/arm/boot/dts/am43xx-clocks.dtsi +54 -0
index 091356f2a8c1..c726cd8dbdf1 100644
@@ -704,6 +704,60 @@
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#3 lore raw

PATCH v2 2/3 ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries

In reply to Benoit Parrot

Add VPFE device nodes entries.
Add OmniVision OV2659 sensor device nodes and linkage.

The sensor clock (xvclk) is sourced from clkout1.
Add clock entries to properly select clkout1 and set its parent clock to sys_clkin_ck.

---
 arch/arm/boot/dts/am437x-sk-evm.dts | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
arch/arm/boot/dts/am437x-sk-evm.dts +26 -1
index 74eaa6a3b258..25222497f828 100644
@@ -272,6 +272,12 @@
 		>;
 	};
 
+	clkout1_pin: pinmux_clkout1_pin {
+		pinctrl-single,pins = <
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
+		>;
+	};
+
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -593,6 +599,25 @@
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout1_pin>;
+
+		clocks = <&clkout1_mux_ck>;
+		clock-names = "xvclk";
+		assigned-clocks = <&clkout1_mux_ck>;
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
 	edt-ft5306@38 {
 		status = "okay";
 		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
@@ -877,7 +902,7 @@
 	/* Camera port */
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
Signature · 1 line
2.17.1
#4 lore raw

PATCH v2 3/3 ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries

In reply to Benoit Parrot

Add VPFE device nodes entries.
Add OmniVision OV2659 sensor device nodes and linkage.

Since Rev1.2a on this board the sensor source clock (xvclk) has a dedicated 12Mhz oscillator instead of using clkout1. Add 'audio_mstrclk' fixed clock object to represent it.

---
 arch/arm/boot/dts/am43x-epos-evm.dts | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)
arch/arm/boot/dts/am43x-epos-evm.dts +22 -1
index 95314121d111..b0df37014888 100644
@@ -145,6 +145,12 @@
 			system-clock-frequency = <12000000>;
 		};
 	};
+
+	audio_mstrclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
 };
 
 &am43xx_pinmux {
@@ -696,6 +702,21 @@
 		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
 		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&audio_mstrclk>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -962,7 +983,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
Signature · 1 line
2.17.1