ARM: dts: am43x-vpfe/ov2659.patch
Subsystems (2)
v2 cover ARM: dts: am43x-vpfe/ov2659.patch
This patch series adds the missing camera endpoint (ov2659) as well as the required source clocks nodes for the sensor.
On the am437x-sk-evm the camera sensor is sourced from clkout1 but that clock nodes/tree was removed as it was unsed at the time, we are re-adding the needed clock nodes here.
Changes since v1:
- Fix clock name to make it generic
- Add non-standard clock node naming to commit message as per Tony's comment
- Rename all clock nodes to use '-' instead of '_'
Benoit Parrot (2):
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
Tero Kristo (1):
ARM: dts: am43xx: add support for clkout1 clock
arch/arm/boot/dts/am437x-sk-evm.dts | 27 +++++++++++++- arch/arm/boot/dts/am43x-epos-evm.dts | 23 +++++++++++- arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++ 3 files changed, 102 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/3 ARM: dts: am43xx: add support for clkout1 clock
From: Tero Kristo <[email protected]>
clkout1 clock node and its generation tree was missing. Add this based on the data on TRM and PRCM functional spec.
commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for clkout1 clock") which is needed for the ov2659 camera sensor clock definition hence it is being re-applied here.
Note that because of the current dts node name dependency for mapping to clock domain, we must still use "clkout1-*ck" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes.
--- arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)
arch/arm/boot/dts/am43xx-clocks.dtsi +54 -0
@@ -704,6 +704,60 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; + + clkout1_osc_div_ck: clkout1-osc-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <20>; + ti,max-div = <4>; + reg = <0x4100>; + }; + + clkout1_src2_mux_ck: clkout1-src2-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>; + reg = <0x4100>; + }; + + clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4100>; + }; + + clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4100>; + }; + + clkout1_mux_ck: clkout1-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, + <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; + ti,bit-shift = <16>; + reg = <0x4100>; + }; + + clkout1_ck: clkout1-ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout1_mux_ck>; + ti,bit-shift = <23>; + reg = <0x4100>; + }; }; &prcm {
Signature · 1 line
2.17.1
Re: [Patch v2 1/3] ARM: dts: am43xx: add support for clkout1 clock
Quoted 15 lines · Benoit Parrot
From: Tero Kristo <[email protected]>
clkout1 clock node and its generation tree was missing. Add this based on the data on TRM and PRCM functional spec.
commit
664ae1ab2536("ARM: dts: am43xx: add clkctrl nodes") effectively reverted this commit8010f13a40d3("ARM: dts: am43xx: add support for clkout1 clock") which is needed for the ov2659 camera sensor clock definition hence it is being re-applied here.Note that because of the current dts node name dependency for mapping to clock domain, we must still use "clkout1-*ck" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes.
Quoted 4 lines
Fixes 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes")Signed-off-by Tero Kristo <[email protected]>Tested-by Benoit Parrot <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
Hmm I don't think I did any work on this, the above should be:
Quoted 78 lines
Signed-off-by Benoit Parrot <[email protected]>--- arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)arch/arm/boot/dts/am43xx-clocks.dtsi +54
-0@@ -704,6 +704,60 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; + + clkout1_osc_div_ck: clkout1-osc-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <20>; + ti,max-div = <4>; + reg = <0x4100>; + }; + + clkout1_src2_mux_ck: clkout1-src2-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>; + reg = <0x4100>; + }; + + clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4100>; + }; + + clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4100>; + }; + + clkout1_mux_ck: clkout1-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, + <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; + ti,bit-shift = <16>; + reg = <0x4100>; + }; + + clkout1_ck: clkout1-ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout1_mux_ck>; + ti,bit-shift = <23>; + reg = <0x4100>; + }; }; &prcm {Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 2/3 ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
In reply to Benoit ParrotAdd VPFE device nodes entries.
Add OmniVision OV2659 sensor device nodes and linkage.
The sensor clock (xvclk) is sourced from clkout1.
Add clock entries to properly select clkout1 and set its parent clock to sys_clkin_ck.
--- arch/arm/boot/dts/am437x-sk-evm.dts | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
arch/arm/boot/dts/am437x-sk-evm.dts +26 -1
@@ -272,6 +272,12 @@ >; }; + clkout1_pin: pinmux_clkout1_pin { + pinctrl-single,pins = < + 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */ + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */
@@ -593,6 +599,25 @@ pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&clkout1_pin>; + + clocks = <&clkout1_mux_ck>; + clock-names = "xvclk"; + assigned-clocks = <&clkout1_mux_ck>; + assigned-clock-parents = <&clkout1_osc_div_ck>; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; + edt-ft5306@38 { status = "okay"; compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
@@ -877,7 +902,7 @@ /* Camera port */ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>;
Signature · 1 line
2.17.1
PATCH v2 3/3 ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
In reply to Benoit ParrotAdd VPFE device nodes entries.
Add OmniVision OV2659 sensor device nodes and linkage.
Since Rev1.2a on this board the sensor source clock (xvclk) has a dedicated 12Mhz oscillator instead of using clkout1. Add 'audio_mstrclk' fixed clock object to represent it.
--- arch/arm/boot/dts/am43x-epos-evm.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)
arch/arm/boot/dts/am43x-epos-evm.dts +22 -1
@@ -145,6 +145,12 @@ system-clock-frequency = <12000000>; }; }; + + audio_mstrclk: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; }; &am43xx_pinmux {
@@ -696,6 +702,21 @@ IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&audio_mstrclk>; + clock-names = "xvclk"; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe1_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &i2c2 {
@@ -962,7 +983,7 @@ port { vpfe1_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>;
Signature · 1 line
2.17.1