Skip to contentSkip to conversation

arm64: dts: rockchip: remove 408MHz operating point from px30

PATCH Applied Heiko Stuebner 1 participant 2 messages Nov 16, 2019 – Nov 18, 2019

Subsystems (2)
lore
Share & tools
lore

Heiko Stuebner

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: rockchip: remove 408MHz operating point from px30

From: Heiko Stuebner <[email protected]>

It looks like the px30 is running unstable at this 408MHz operating point. This shows in stalled threads and other big numbers of kernel exception.

At 600MHz and above it instead works stable and as expected. As the 408MHz point doesn't even decrease the voltage compared to 600MHz, just drop this 408MHz operating point for now.

---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
arch/arm64/boot/dts/rockchip/px30.dtsi +1 -6
index c68d6fede53d..ff53cc56f80f 100644
@@ -114,16 +114,11 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000 950000 1350000>;
-			clock-latency-ns = <40000>;
-			opp-suspend;
-		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1350000>;
 			clock-latency-ns = <40000>;
+			opp-suspend;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
Signature · 1 line
2.24.0
author maintainer Applied
#1 lore raw

Am Samstag, 16. November 2019, 10:52:20 CET schrieb Heiko Stuebner:

Quoted 10 lines

From: Heiko Stuebner <[email protected]>

It looks like the px30 is running unstable at this 408MHz operating point. This shows in stalled threads and other big numbers of kernel exception.

At 600MHz and above it instead works stable and as expected. As the 408MHz point doesn't even decrease the voltage compared to 600MHz, just drop this 408MHz operating point for now.

applied