arm64: dts: rockchip: remove 408MHz operating point from px30
Subsystems (2)
Heiko Stuebner
maintainerPATCH 1/1 arm64: dts: rockchip: remove 408MHz operating point from px30
From: Heiko Stuebner <[email protected]>
It looks like the px30 is running unstable at this 408MHz operating point. This shows in stalled threads and other big numbers of kernel exception.
At 600MHz and above it instead works stable and as expected. As the 408MHz point doesn't even decrease the voltage compared to 600MHz, just drop this 408MHz operating point for now.
--- arch/arm64/boot/dts/rockchip/px30.dtsi | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
arch/arm64/boot/dts/rockchip/px30.dtsi +1 -6
@@ -114,16 +114,11 @@ compatible = "operating-points-v2"; opp-shared; - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000 950000 1350000>; - clock-latency-ns = <40000>; - opp-suspend; - }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000 950000 1350000>; clock-latency-ns = <40000>; + opp-suspend; }; opp-816000000 { opp-hz = /bits/ 64 <816000000>;
Signature · 1 line
2.24.0
Am Samstag, 16. November 2019, 10:52:20 CET schrieb Heiko Stuebner:
Quoted 10 lines
From: Heiko Stuebner <[email protected]>
It looks like the px30 is running unstable at this 408MHz operating point. This shows in stalled threads and other big numbers of kernel exception.
At 600MHz and above it instead works stable and as expected. As the 408MHz point doesn't even decrease the voltage compared to 600MHz, just drop this 408MHz operating point for now.
Signed-off-by Heiko Stuebner <[email protected]>
applied