i2c: Fix Kconfig indentation
Subsystems (2)
PATCH v2 1/1 i2c: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
---
Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.
--- drivers/i2c/busses/Kconfig | 22 +++++++++++----------- drivers/i2c/muxes/Kconfig | 18 +++++++++--------- 2 files changed, 20 insertions(+), 20 deletions(-)
drivers/i2c/busses/Kconfig +11 -11
@@ -293,7 +293,7 @@ config I2C_VIA select I2C_ALGOBIT help If you say yes to this option, support will be included for the VIA - 82C586B I2C interface + 82C586B I2C interface This driver can also be built as a module. If so, the module will be called i2c-via.
@@ -678,11 +678,11 @@ config I2C_IMX_LPI2C tristate "IMX Low Power I2C interface" depends on ARCH_MXC || COMPILE_TEST help - Say Y here if you want to use the Low Power IIC bus controller - on the Freescale i.MX processors. + Say Y here if you want to use the Low Power IIC bus controller + on the Freescale i.MX processors. - This driver can also be built as a module. If so, the module - will be called i2c-imx-lpi2c. + This driver can also be built as a module. If so, the module + will be called i2c-imx-lpi2c. config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
@@ -1184,9 +1184,9 @@ config I2C_DIOLAN_U2C will be called i2c-diolan-u2c. config I2C_DLN2 - tristate "Diolan DLN-2 USB I2C adapter" - depends on MFD_DLN2 - help + tristate "Diolan DLN-2 USB I2C adapter" + depends on MFD_DLN2 + help If you say yes to this option, support will be included for Diolan DLN2, a USB to I2C interface.
@@ -1285,9 +1285,9 @@ config I2C_VIPERBOARD help Say yes here to access the I2C part of the Nano River Technologies Viperboard as I2C master. - See viperboard API specification and Nano - River Tech's viperboard.h for detailed meaning - of the module parameters. + See viperboard API specification and Nano + River Tech's viperboard.h for detailed meaning + of the module parameters. comment "Other I2C/SMBus bus drivers"
drivers/i2c/muxes/Kconfig +9 -9
@@ -109,14 +109,14 @@ config I2C_DEMUX_PINCTRL want to change the I2C master at run-time depending on features. config I2C_MUX_MLXCPLD - tristate "Mellanox CPLD based I2C multiplexer" - help - If you say yes to this option, support will be included for a - CPLD based I2C multiplexer. This driver provides access to - I2C busses connected through a MUX, which is controlled - by a CPLD register. - - This driver can also be built as a module. If so, the module - will be called i2c-mux-mlxcpld. + tristate "Mellanox CPLD based I2C multiplexer" + help + If you say yes to this option, support will be included for a + CPLD based I2C multiplexer. This driver provides access to + I2C busses connected through a MUX, which is controlled + by a CPLD register. + + This driver can also be built as a module. If so, the module + will be called i2c-mux-mlxcpld. endmenu
Signature · 1 line
2.7.4
Quoted 6 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */KconfigSigned-off-by Krzysztof Kozlowski <[email protected]>
Quoted 7 lines
---
Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.--- drivers/i2c/busses/Kconfig | 22 +++++++++++----------- drivers/i2c/muxes/Kconfig | 18 +++++++++---------
Peter, I'd like to apply this for 5.5. so we don't have to deal with whitespace conflicts during the next cycle. Are you fine with me picking it up for muxes?
Peter Rosin
Acked-byQuoted 15 lines · Wolfram Sang
Quoted 6 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */KconfigSigned-off-by Krzysztof Kozlowski <[email protected]>Quoted 7 lines
---
Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.--- drivers/i2c/busses/Kconfig | 22 +++++++++++----------- drivers/i2c/muxes/Kconfig | 18 +++++++++---------
Quoted 3 lines
Peter, I'd like to apply this for 5.5. so we don't have to deal with whitespace conflicts during the next cycle. Are you fine with me picking it up for muxes?
Absolutely!
Cheers,
Peter
Quoted 6 lines
Quoted 4 lines
Peter, I'd like to apply this for 5.5. so we don't have to deal with whitespace conflicts during the next cycle. Are you fine with me picking it up for muxes?
Absolutely!
Cool, thanks!
Wolfram Sang
AppliedQuoted 6 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */KconfigSigned-off-by Krzysztof Kozlowski <[email protected]>
Applied to for-next, thanks!