ARM: at91: Print CPU serial number in cpuinfo
RFC PATCH 1/1 ARM: at91: Print CPU serial number in cpuinfo
The SAMA5D2 and SAMA5D4 series SoCs have a 64-bit Serial Number (unique ID) burned in, which is displayed with 'print_cpuinfo()' now (in the same format the SAM-BA applet prints it).
Example output:
CPU: SAMA5D27 1G bits DDR2 SDRAM
Serial number 0: 0x4630394b
1: 0x190d2750 Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz
---
I looked over lots of other 'print_cpuinfo()' implementations for different SoCs and found none printing a unique ID at all. Is there another place for this? Is it just few SoCs have such a serial number at all? Or is it not desired to print those along with the other CPU info?
Greets
Alex
--- arch/arm/mach-at91/armv7/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/mach-at91/armv7/cpu.c +8 -0
@@ -13,6 +13,7 @@#include <asm/arch/hardware.h> #include <asm/arch/at91_pit.h> #include <asm/arch/at91_gpbr.h> +#include <asm/arch/at91_sfr.h> #include <asm/arch/clk.h> #ifndef CONFIG_SYS_AT91_MAIN_CLOCK
@@ -42,9 +43,16 @@ void arch_preboot_os(void)#if defined(CONFIG_DISPLAY_CPUINFO )int print_cpuinfo (void ) { +struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR ;char buf[32 ];printf ("CPU: %s\n" ,get_cpu_name ()); + +#if defined(CONFIG_SAMA5D2 ) || defined(CONFIG_SAMA5D4 ) +printf ("Serial number 0: 0x%08x\n" , sfr->sn0); +printf (" 1: 0x%08x\n" , sfr->sn1); +#endif +printf ("Crystal frequency: %8s MHz\n" ,strmhz (buf,get_main_clk_rate ())); printf("CPU clock : %8s MHz\n",
Signature · 1 line
2.20.1
RFC PATCH 1/1 ARM: at91: Print CPU serial number in cpuinfo
Quoted 13 lines · Alexander Dahl
The SAMA5D2 and SAMA5D4 series SoCs have a 64-bit Serial Number (unique ID) burned in, which is displayed with '
print_cpuinfo()' now (in the same format the SAM-BA applet prints it).Example output:
CPU: SAMA5D27 1G bits DDR2 SDRAM
Serial number 0:0x4630394b1: 0x190d2750 Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz
Quoted 9 lines
Signed-off-by Alexander Dahl <[email protected]>---
I looked over lots of other '
print_cpuinfo()' implementations for different SoCs and found none printing a unique ID at all. Is there another place for this? Is it just few SoCs have such a serial number at all? Or is it not desired to print those along with the other CPU info?
Hi Alex,
I do not have anything against it.
Nor do I have a strong opinion about which way to go. Is it better to just have a CMD that prints out this serial or print it at boot ? Maybe some other people have a different idea ?
Eugen
Quoted 40 lines
Greets
Alex--- arch/arm/mach-at91/armv7/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/mach-at91/armv7/cpu.c +8
-1@@ -13,6 +13,7 @@#include <asm/arch/hardware.h> #include <asm/arch/at91_pit.h> #include <asm/arch/at91_gpbr.h> +#include <asm/arch/at91_sfr.h> #include <asm/arch/clk.h> #ifndef CONFIG_SYS_AT91_MAIN_CLOCK @@ -42,9 +43,16 @@ void arch_preboot_os(void)#if defined(CONFIG_DISPLAY_CPUINFO )int print_cpuinfo (void ) { +struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR ;char buf[32 ];printf ("CPU: %s\n" ,get_cpu_name ()); + +#if defined(CONFIG_SAMA5D2 ) || defined(CONFIG_SAMA5D4 ) +printf ("Serial number 0: 0x%08x\n" , sfr->sn0); +printf (" 1: 0x%08x\n" , sfr->sn1); +#endif +printf ("Crystal frequency: %8s MHz\n" ,strmhz (buf,get_main_clk_rate ())); printf("CPU clock : %8s MHz\n", --2.20.1