drm/sun4i: Allwinner A64 MIPI-DSI support
Subsystems (6)
v12 cover drm/sun4i: Allwinner A64 MIPI-DSI support
This is v12 version for Allwinner A64 MIPI-DSI support and here is the previous version set[1]
Changes for v12:
- use enum insted of oneOf+const
- handle bus clock using regmap attach clk
- tested on A64, A33 boards.
Changes for v11:
- fix dt-bindings for dphy
- fix dt-bindings for dsi controller
- add bus clock handling code
- tested on A64, A33 boards.
Changes for v10:
- updated dt-bindings as per .yaml format
- rebased on drm-misc/for-linux-next
Changes for v9:
- moved dsi fixes in separate series on top of A33
- rebase on linux-next
Changes for v8:
- rebased on drm-misc change along with linux-next
- reworked video start delay patch
- tested on 4 different dsi panels
- reworked commit messages
Changes for v7:
- moved vcc-dsi binding to required filed.
- drop quotes on fallback dphy bindings.
- drop min_rate clock pll-mipi patches.
- introduce dclk divider computation as like A64 BSP.
- add A64 DSI quark patches.
- fixed A64 DSI pipeline.
- add proper commit messages.
- collect Merlijn Wajer Tested-by credits.
Changes for v6:
- dropped unneeded changes, patches
- fixed all burst mode patches as per previous version comments
- rebase on master
- update proper commit message
- dropped unneeded comments
- order the patches that make review easy
Changes for v5:
- collect Rob, Acked-by
- droped "Fix VBP size calculation" patch
- updated vblk timing calculation.
- droped techstar, bananapi dsi panel drivers which may require bridge or other setup. it's under discussion.
Changes for v4:
- droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in nkm min, max rate patches
- create two patches for "Add Allwinner A64 MIPI DSI support" one for has_mod_clk quirk and other one for A64 support
- use existing driver code construct for hblk computation
- dropped "Increase hfp packet overhead" patch [2], though BSP added this but we have no issues as of now.
(no issues on panel side w/o this change)
- create separate function for vblk computation
- enable vcc-dsi regulator in dsi_runtime_resume
- collect Rob, Acked-by
- update MAINTAINERS file for panel drivers
- cleanup commit messages
- fixed checkpatch warnings/errors
[1] https://patchwork.freedesktop.org/series/68579/
Any inputs?
Jagan.
Jagan Teki (7):
dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback)
drm/sun4i: dsi: Add has_mod_clk quirk
drm/sun4i: dsi: Handle bus clock via regmap_mmio_attach_clk
drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support
arm64: dts: allwinner: a64: Add MIPI DSI pipeline
[DO NOT MERGE] arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel
.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 ++++- .../phy/allwinner,sun6i-a31-mipi-dphy.yaml | 6 +- .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 31 +++++++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 ++++++++ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 86 +++++++++++++++---- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 ++ 6 files changed, 164 insertions(+), 21 deletions(-)
Signature · 6 lines
2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v12 1/7 dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have DSI_SCLK gating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLK uses mod clock-names on dt-bindings, so the same is not required for A64.
On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocks
So, update dt-bindings so-that it can document both A33, A64 bindings requirements.
---
Changes for v12:
- Use 'enum' instead of oneOf+const
.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +18 -2
@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1
@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock
@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - port +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names + additionalProperties: false examples:
Signature · 1 line
2.18.0.321.gffc6fa0e3
Maxime Ripard
maintainerRe: [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
Quoted 62 lines · Jagan Teki
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have
DSI_SCLKgating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLKuses mod clock-names on dt-bindings, so the same is not required for A64.On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocksSo, update dt-bindings so-that it can document both A33, A64 bindings requirements.
Reviewed-by Rob Herring <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- Use 'enum' instead of oneOf+const.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +8
-2@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - port +allOf: + - if: + properties:
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml required: · line 88
Quoted 10 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +10
-0+ compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names +
Your else condition should check that the number of clocks items is 1 on the A64
Maxime
Re: [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
Quoted 61 lines · Maxime Ripard
Quoted 59 lines · Jagan Teki
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have
DSI_SCLKgating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLKuses mod clock-names on dt-bindings, so the same is not required for A64.On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocksSo, update dt-bindings so-that it can document both A33, A64 bindings requirements.
Reviewed-by Rob Herring <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- Use 'enum' instead of oneOf+const.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +5
-2@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - port
Quoted 16 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml required: · line 88
Quoted 13 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +13
-0+allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names +Your else condition should check that the number of clocks items is 1 on the A64
But the minItems mentioned as 1 in clocks, which is unchanged number by default. doesn't it sufficient?
Maxime Ripard
maintainerRe: [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
Quoted 79 lines · Jagan Teki
Quoted 61 lines · Maxime Ripard
Quoted 59 lines · Jagan Teki
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have
DSI_SCLKgating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLKuses mod clock-names on dt-bindings, so the same is not required for A64.On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocksSo, update dt-bindings so-that it can document both A33, A64 bindings requirements.
Reviewed-by Rob Herring <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- Use 'enum' instead of oneOf+const.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +5
-2@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - portQuoted 16 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml required: · line 88
Quoted 13 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +13
-0+allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names +Your else condition should check that the number of clocks items is 1 on the A64
Quoted 2 lines
But the minItems mentioned as 1 in clocks, which is unchanged number by default. doesn't it sufficient?
In the main schema, it's said that the clocks property can have one or two elements (to cover the A31 case that has one, and the A64 case that has 2).
This is fine.
Later on, you enforce that the A64 has two elements, and this is fine too.
However, you never check that on the A31 you only have one clock, and you could very well have two and no one would notice.
Maxime
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
Quoted 84 lines · Maxime Ripard
Quoted 79 lines · Jagan Teki
Quoted 61 lines · Maxime Ripard
Quoted 59 lines · Jagan Teki
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have
DSI_SCLKgating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLKuses mod clock-names on dt-bindings, so the same is not required for A64.On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocksSo, update dt-bindings so-that it can document both A33, A64 bindings requirements.
Reviewed-by Rob Herring <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- Use 'enum' instead of oneOf+const.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +5
-2@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - portQuoted 16 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml required: · line 88
Quoted 13 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +13
-0+allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names +Your else condition should check that the number of clocks items is 1 on the A64
Quoted 2 lines
But the minItems mentioned as 1 in clocks, which is unchanged number by default. doesn't it sufficient?
Quoted 8 lines
In the main schema, it's said that the clocks property can have one or two elements (to cover the A31 case that has one, and the A64 case that has 2).
This is fine.
Later on, you enforce that the A64 has two elements, and this is fine too.
Actually A31 case has 2 and A64 case has 1.
Quoted 3 lines
However, you never check that on the A31 you only have one clock, and you could very well have two and no one would notice.
I did check A31 case for 2 but not in A64. this is what you mean? so adding A64 check like below would fine?
allOf:
- if:
properties:
compatible:
contains:
const: allwinner,sun6i-a31-mipi-dsi
then:
properties:
clocks:
minItems: 2
required:
- clock-names
- if:
properties:
compatible:
contains:
const: allwinner,sun50i-a64-mipi-dsi
then:
properties:
clocks:
minItems: 1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Maxime Ripard
maintainerRe: [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
Quoted 103 lines · Jagan Teki
Quoted 84 lines · Maxime Ripard
Quoted 79 lines · Jagan Teki
Quoted 61 lines · Maxime Ripard
Quoted 59 lines · Jagan Teki
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have
DSI_SCLKgating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLKuses mod clock-names on dt-bindings, so the same is not required for A64.On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocksSo, update dt-bindings so-that it can document both A33, A64 bindings requirements.
Reviewed-by Rob Herring <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- Use 'enum' instead of oneOf+const.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +5
-2@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - portQuoted 16 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml required: · line 88
Quoted 13 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +13
-0+allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names +Your else condition should check that the number of clocks items is 1 on the A64
Quoted 2 lines
But the minItems mentioned as 1 in clocks, which is unchanged number by default. doesn't it sufficient?
Quoted 8 lines
In the main schema, it's said that the clocks property can have one or two elements (to cover the A31 case that has one, and the A64 case that has 2).
This is fine.
Later on, you enforce that the A64 has two elements, and this is fine too.
Actually A31 case has 2 and A64 case has 1.
Quoted 3 lines
However, you never check that on the A31 you only have one clock, and you could very well have two and no one would notice.
I did check A31 case for 2 but not in A64. this is what you mean? so adding A64 check like below would fine?
Quoted 6 lines
allOf:
- if:
properties:
compatible:
contains:
const: allwinner,sun6i-a31-mipi-dsi
You need a new line here
Quoted 1 line
then:
This is the wrong level of indentation, it needs to be at the same level than if
Quoted 3 lines
properties:
clocks:
minItems: 2
Newline
Quoted 2 lines
required:
- clock-names
Newline
Quoted 9 lines
- if:
properties:
compatible:
contains:
const: allwinner,sun50i-a64-mipi-dsi
then:
properties:
clocks:
minItems: 1
(and same thing here).
But yeah, otherwise that's what I meant
Maxime
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller
Quoted 105 lines · Maxime Ripard
Quoted 103 lines · Jagan Teki
Quoted 84 lines · Maxime Ripard
Quoted 79 lines · Jagan Teki
Quoted 61 lines · Maxime Ripard
Quoted 59 lines · Jagan Teki
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have
DSI_SCLKgating so it is valid to have separate compatible for A64 on the same driver.
DSI_SCLKuses mod clock-names on dt-bindings, so the same is not required for A64.On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocksSo, update dt-bindings so-that it can document both A33, A64 bindings requirements.
Reviewed-by Rob Herring <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- Use 'enum' instead of oneOf+const.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +5
-2@@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1@@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock@@ -63,13 +67,25 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - portQuoted 16 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml required: · line 88
Quoted 13 lines
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +13
-0+allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + then: + properties: + clocks: + minItems: 2 + required: + - clock-names +Your else condition should check that the number of clocks items is 1 on the A64
Quoted 2 lines
But the minItems mentioned as 1 in clocks, which is unchanged number by default. doesn't it sufficient?
Quoted 8 lines
In the main schema, it's said that the clocks property can have one or two elements (to cover the A31 case that has one, and the A64 case that has 2).
This is fine.
Later on, you enforce that the A64 has two elements, and this is fine too.
Actually A31 case has 2 and A64 case has 1.
Quoted 3 lines
However, you never check that on the A31 you only have one clock, and you could very well have two and no one would notice.
I did check A31 case for 2 but not in A64. this is what you mean? so adding A64 check like below would fine?
Quoted 8 lines
Quoted 6 lines
allOf:
- if:
properties:
compatible:
contains:
const: allwinner,sun6i-a31-mipi-dsiYou need a new line here
I couldn't see new line before then: in example schema -
https://elixir.bootlin.com/linux/v5.5-rc2/source/Documentation/devicetree/bindings/example-schema.yaml#L208
May be a new changes for this ML or so?
Quoted 4 lines
Quoted 2 lines
then:
This is the wrong level of indentation, it needs to be at the same level than if
True, I have seen it in example schema.
Quoted 22 lines
Quoted 4 lines
properties:
clocks:
minItems: 2Newline
Quoted 2 lines
required:
- clock-namesNewline
Quoted 9 lines
- if:
properties:
compatible:
contains:
const: allwinner,sun50i-a64-mipi-dsi
then:
properties:
clocks:
minItems: 1
Quoted 3 lines
(and same thing here).
But yeah, otherwise that's what I meant
Thanks for the detailed review.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v12 2/7 dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback)
In reply to Jagan TekiThe MIPI DSI PHY controller on Allwinner A64 is similar on the one on A31.
Add A64 compatible and append A31 compatible as fallback.
---
Changes for v12:
- none
.../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +5 -1
@@ -15,7 +15,11 @@ properties: const: 0 compatible: - const: allwinner,sun6i-a31-mipi-dphy + oneOf: + - const: allwinner,sun6i-a31-mipi-dphy + - items: + - const: allwinner,sun50i-a64-mipi-dphy + - const: allwinner,sun6i-a31-mipi-dphy reg: maxItems: 1
Signature · 1 line
2.18.0.321.gffc6fa0e3
Re: [PATCH v12 2/7] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback)
Quoted 5 lines · Jagan Teki
The MIPI DSI PHY controller on Allwinner A64 is similar on the one on A31.
Add A64 compatible and append A31 compatible as fallback.
Quoted 7 lines
Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- none.../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
PATCH v12 3/7 drm/sun4i: dsi: Add has_mod_clk quirk
In reply to Jagan TekiAs per the user manual, look like mod clock is not mandatory for all Allwinner MIPI DSI controllers, it is connected to CLK_DSI_SCLK for A31 and not available in A64.
So add has_mod_clk quirk and process the mod clk accordingly.
---
Changes for v12:
- none
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 38 ++++++++++++++++++-------- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 ++++ 2 files changed, 32 insertions(+), 11 deletions(-)
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +27 -11
@@ -11,6 +11,7 @@#include <linux/crc-ccitt.h> #include <linux/module.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/phy/phy-mipi-dphy.h> #include <linux/phy/phy.h> #include <linux/platform_device.h>
@@ -1093,6 +1094,7 @@ static int sun6i_dsi_probe(struct platform_device *pdev) dsi->dev = dev; dsi->host.ops = &sun6i_dsi_host_ops; dsi->host.dev = dev; + dsi->variant =of_device_get_match_data (dev); res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); base =devm_ioremap_resource (dev, res);
@@ -1120,17 +1122,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev)return PTR_ERR (dsi->reset); } - dsi->mod_clk =devm_clk_get (dev,"mod" ); -if (IS_ERR (dsi->mod_clk)) { -dev_err (dev,"Couldn't get the DSI mod clock\n" ); -return PTR_ERR (dsi->mod_clk); +if (dsi->variant->has_mod_clk) { + dsi->mod_clk =devm_clk_get (dev,"mod" ); +if (IS_ERR (dsi->mod_clk)) { +dev_err (dev,"Couldn't get the DSI mod clock\n" ); +return PTR_ERR (dsi->mod_clk); + } }/* * In order to operate properly, that clock seems to be always * set to 297MHz. */ -clk_set_rate_exclusive (dsi->mod_clk,297000000 ); +if (dsi->variant->has_mod_clk) +clk_set_rate_exclusive (dsi->mod_clk,297000000 ); dsi->dphy =devm_phy_get (dev,"dphy" );if (IS_ERR (dsi->dphy)) {
@@ -1160,7 +1165,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) err_pm_disable:pm_runtime_disable (dev); err_unprotect_clk: -clk_rate_exclusive_put (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_rate_exclusive_put (dsi->mod_clk);return ret; }
@@ -1172,7 +1178,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev)component_del (&pdev->dev, &sun6i_dsi_ops);mipi_dsi_host_unregister (&dsi->host);pm_runtime_disable (dev); -clk_rate_exclusive_put (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_rate_exclusive_put (dsi->mod_clk);return 0 ; }
@@ -1189,7 +1196,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) }reset_control_deassert (dsi->reset); -clk_prepare_enable (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_prepare_enable (dsi->mod_clk);/* * Enable the DSI block.
@@ -1217,7 +1225,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) {struct sun6i_dsi *dsi =dev_get_drvdata (dev); -clk_disable_unprepare (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_disable_unprepare (dsi->mod_clk);reset_control_assert (dsi->reset);regulator_disable (dsi->regulator);
@@ -1230,9 +1239,16 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { NULL) }; +static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi = { + .has_mod_clk = true, +}; +static const struct of_device_id sun6i_dsi_of_table[] = { - { .compatible ="allwinner,sun6i-a31-mipi-dsi" }, - { } + { + .compatible ="allwinner,sun6i-a31-mipi-dsi" , + .data = &sun6i_a31_mipi_dsi, + }, + {/* sentinel */ } };MODULE_DEVICE_TABLE (of, sun6i_dsi_of_table);
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +5 -0
@@ -15,6 +15,10 @@#define SUN6I_DSI_TCON_DIV 4 +struct sun6i_dsi_variant { +bool has_mod_clk; +}; +struct sun6i_dsi {struct drm_connector connector;struct drm_encoder encoder;
@@ -31,6 +35,7 @@ struct sun6i_dsi {struct sun4i_drv *drv;struct mipi_dsi_device *device;struct drm_panel *panel; +const struct sun6i_dsi_variant *variant; };static inline struct sun6i_dsi *host_to_sun6i_dsi (struct mipi_dsi_host *host)
Signature · 6 lines
2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v12 3/7] drm/sun4i: dsi: Add has_mod_clk quirk
Quoted 50 lines · Jagan Teki
As per the user manual, look like mod clock is not mandatory for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLKfor A31 and not available in A64.So add
has_mod_clkquirk and process the mod clk accordingly.Tested-by Merlijn Wajer <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- nonedrivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 38 ++++++++++++++++++-------- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 ++++ 2 files changed, 32 insertions(+), 11 deletions(-)drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +7
-4@@ -11,6 +11,7 @@#include <linux/crc-ccitt.h> #include <linux/module.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/phy/phy-mipi-dphy.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> @@ -1093,6 +1094,7 @@ static int sun6i_dsi_probe(struct platform_device *pdev) dsi->dev = dev; dsi->host.ops = &sun6i_dsi_host_ops; dsi->host.dev = dev; + dsi->variant =of_device_get_match_data (dev); res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); base =devm_ioremap_resource (dev, res);@@ -1120,17 +1122,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev)return PTR_ERR (dsi->reset); } - dsi->mod_clk =devm_clk_get (dev,"mod" ); -if (IS_ERR (dsi->mod_clk)) { -dev_err (dev,"Couldn't get the DSI mod clock\n" ); -return PTR_ERR (dsi->mod_clk); +if (dsi->variant->has_mod_clk) { + dsi->mod_clk =devm_clk_get (dev,"mod" ); +if (IS_ERR (dsi->mod_clk)) { +dev_err (dev,"Couldn't get the DSI mod clock\n" ); +return PTR_ERR (dsi->mod_clk);
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int sun6i_dsi_probe(struct platform_device *pdev) · line 1138
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +3
-1+ } }/* * In order to operate properly, that clock seems to be always * set to 297MHz. */ -clk_set_rate_exclusive (dsi->mod_clk,297000000 ); +if (dsi->variant->has_mod_clk) +clk_set_rate_exclusive (dsi->mod_clk,297000000 );
The clk API can handle NULL pointers, so you don't need to add the if here...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int sun6i_dsi_probe(struct platform_device *pdev) · line 1169
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1dsi->dphy =devm_phy_get (dev,"dphy" );if (IS_ERR (dsi->dphy)) {@@ -1160,7 +1165,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) err_pm_disable:pm_runtime_disable (dev); err_unprotect_clk: -clk_rate_exclusive_put (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_rate_exclusive_put (dsi->mod_clk);
and here...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int sun6i_dsi_remove(struct platform_device *pdev) · line 1182
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1return ret; }@@ -1172,7 +1178,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev)component_del (&pdev->dev, &sun6i_dsi_ops);mipi_dsi_host_unregister (&dsi->host);pm_runtime_disable (dev); -clk_rate_exclusive_put (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_rate_exclusive_put (dsi->mod_clk);
and here ...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) · line 1200
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1return 0 ; }@@ -1189,7 +1196,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) }reset_control_deassert (dsi->reset); -clk_prepare_enable (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_prepare_enable (dsi->mod_clk);
and here...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) · line 1229
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1/* * Enable the DSI block. @@ -1217,7 +1225,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) {struct sun6i_dsi *dsi =dev_get_drvdata (dev); -clk_disable_unprepare (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_disable_unprepare (dsi->mod_clk);
and here.
Quoted 27 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +9
-2reset_control_assert (dsi->reset);regulator_disable (dsi->regulator);@@ -1230,9 +1239,16 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { NULL) }; +static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi = { + .has_mod_clk = true, +}; +static const struct of_device_id sun6i_dsi_of_table[] = { - { .compatible ="allwinner,sun6i-a31-mipi-dsi" }, - { } + { + .compatible ="allwinner,sun6i-a31-mipi-dsi" , + .data = &sun6i_a31_mipi_dsi, + }, + {/* sentinel */ } };MODULE_DEVICE_TABLE (of, sun6i_dsi_of_table);drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +0
-0
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h line 21
Quoted 7 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +4
-0@@ -15,6 +15,10 @@#define SUN6I_DSI_TCON_DIV 4 +struct sun6i_dsi_variant { +bool has_mod_clk; +}; +
You could choose to put this above the probe function, since this isn't used anywhere else, and a pointer field doesn't need the full definition.
ChenYu
Quoted 12 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +1
-1struct sun6i_dsi {struct drm_connector connector;struct drm_encoder encoder;@@ -31,6 +35,7 @@ struct sun6i_dsi {struct sun4i_drv *drv;struct mipi_dsi_device *device;struct drm_panel *panel; +const struct sun6i_dsi_variant *variant; };static inline struct sun6i_dsi *host_to_sun6i_dsi (struct mipi_dsi_host *host) --
Quoted 2 lines
2.18.0.321.gffc6fa0e3
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v12 3/7] drm/sun4i: dsi: Add has_mod_clk quirk
Quoted 55 lines · Chen-Yu Tsai
Quoted 53 lines · Jagan Teki
As per the user manual, look like mod clock is not mandatory for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLKfor A31 and not available in A64.So add
has_mod_clkquirk and process the mod clk accordingly.Tested-by Merlijn Wajer <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v12:
- nonedrivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 38 ++++++++++++++++++-------- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 ++++ 2 files changed, 32 insertions(+), 11 deletions(-)drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +8
-4@@ -11,6 +11,7 @@#include <linux/crc-ccitt.h> #include <linux/module.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/phy/phy-mipi-dphy.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> @@ -1093,6 +1094,7 @@ static int sun6i_dsi_probe(struct platform_device *pdev) dsi->dev = dev; dsi->host.ops = &sun6i_dsi_host_ops; dsi->host.dev = dev; + dsi->variant =of_device_get_match_data (dev); res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); base =devm_ioremap_resource (dev, res);@@ -1120,17 +1122,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev)return PTR_ERR (dsi->reset); } - dsi->mod_clk =devm_clk_get (dev,"mod" ); -if (IS_ERR (dsi->mod_clk)) { -dev_err (dev,"Couldn't get the DSI mod clock\n" ); -return PTR_ERR (dsi->mod_clk); +if (dsi->variant->has_mod_clk) { + dsi->mod_clk =devm_clk_get (dev,"mod" ); +if (IS_ERR (dsi->mod_clk)) { +dev_err (dev,"Couldn't get the DSI mod clock\n" ); +return PTR_ERR (dsi->mod_clk); + } }
Quoted 9 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int sun6i_dsi_probe(struct platform_device *pdev) · line 1138
Quoted 7 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1/* * In order to operate properly, that clock seems to be always * set to 297MHz. */ -clk_set_rate_exclusive (dsi->mod_clk,297000000 ); +if (dsi->variant->has_mod_clk) +clk_set_rate_exclusive (dsi->mod_clk,297000000 );The clk API can handle NULL pointers, so you don't need to add the if here...
Ohh. I'm not aware of this. does it added recently?
Quoted 83 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int sun6i_dsi_probe(struct platform_device *pdev) · line 1169
Quoted 11 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1dsi->dphy =devm_phy_get (dev,"dphy" );if (IS_ERR (dsi->dphy)) {@@ -1160,7 +1165,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) err_pm_disable:pm_runtime_disable (dev); err_unprotect_clk: -clk_rate_exclusive_put (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_rate_exclusive_put (dsi->mod_clk);and here...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int sun6i_dsi_remove(struct platform_device *pdev) · line 1182
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1return ret; }@@ -1172,7 +1178,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev)component_del (&pdev->dev, &sun6i_dsi_ops);mipi_dsi_host_unregister (&dsi->host);pm_runtime_disable (dev); -clk_rate_exclusive_put (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_rate_exclusive_put (dsi->mod_clk);and here ...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) · line 1200
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1return 0 ; }@@ -1189,7 +1196,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) }reset_control_deassert (dsi->reset); -clk_prepare_enable (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_prepare_enable (dsi->mod_clk);and here...
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) · line 1229
Quoted 10 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +2
-1/* * Enable the DSI block. @@ -1217,7 +1225,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) {struct sun6i_dsi *dsi =dev_get_drvdata (dev); -clk_disable_unprepare (dsi->mod_clk); +if (dsi->variant->has_mod_clk) +clk_disable_unprepare (dsi->mod_clk);and here.
Quoted 30 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +9
-2reset_control_assert (dsi->reset);regulator_disable (dsi->regulator);@@ -1230,9 +1239,16 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { NULL) }; +static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi = { + .has_mod_clk = true, +}; +static const struct of_device_id sun6i_dsi_of_table[] = { - { .compatible ="allwinner,sun6i-a31-mipi-dsi" }, - { } + { + .compatible ="allwinner,sun6i-a31-mipi-dsi" , + .data = &sun6i_a31_mipi_dsi, + }, + {/* sentinel */ } };MODULE_DEVICE_TABLE (of, sun6i_dsi_of_table);drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +0
-0@@ -15,6 +15,10 @@#define SUN6I_DSI_TCON_DIV 4
Quoted 7 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h line 21
Quoted 4 lines
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +4
-0+struct sun6i_dsi_variant { +bool has_mod_clk; +}; +You could choose to put this above the probe function, since this isn't used anywhere else, and a pointer field doesn't need the full definition.
Okay. Will it be okay to check the compatibility directly on probe using of_device_is_compatible?
Jagan.
PATCH v12 4/7 drm/sun4i: dsi: Handle bus clock via regmap_mmio_attach_clk
In reply to Jagan Tekiregmap has special API to enable the controller bus clock while initializing register space, and current driver is using devm_regmap_init_mmio_clk which require to specify bus clk_id argument as "bus"
But, the usage of clocks are varies between different Allwinner DSI controllers. Clocking in A33 would need bus and mod clocks where as A64 would need only bus clock.
Since A64 support only single bus clock, it is optional to specify the clock-names on the controller device tree node. So using NULL on clk_id would get the attached clock.
To support clk_id as "bus" and "NULL" during clock enablement between controllers, this patch add generic code to handle the bus clock using regmap_mmio_attach_clk with associated regmap APIs.
---
Changes for v12:
- get bus clock only when mod clock present
- use regmap_mmio_attach_clk
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 43 +++++++++++++++++++++----- 1 file changed, 35 insertions(+), 8 deletions(-)
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +35 -8
@@ -1082,6 +1082,7 @@ static const struct component_ops sun6i_dsi_ops = {static int sun6i_dsi_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev; +const char *clk_name =NULL ;struct sun6i_dsi *dsi;struct resource *res;void __iomem *base;
@@ -1095,6 +1096,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) dsi->host.ops = &sun6i_dsi_host_ops; dsi->host.dev = dev; dsi->variant =of_device_get_match_data (dev); +if (dsi->variant->has_mod_clk) + clk_name ="bus" ; res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); base =devm_ioremap_resource (dev, res);
@@ -1109,24 +1112,35 @@ static int sun6i_dsi_probe(struct platform_device *pdev)return PTR_ERR (dsi->regulator); } - dsi->regs =devm_regmap_init_mmio_clk (dev,"bus" , base, - &sun6i_dsi_regmap_config); -if (IS_ERR (dsi->regs)) { -dev_err (dev,"Couldn't create the DSI encoder regmap\n" ); -return PTR_ERR (dsi->regs); - } - dsi->reset =devm_reset_control_get_shared (dev,NULL );if (IS_ERR (dsi->reset)) {dev_err (dev,"Couldn't get our reset line\n" );return PTR_ERR (dsi->reset); } + dsi->regs =devm_regmap_init_mmio (dev, base, &sun6i_dsi_regmap_config); +if (IS_ERR (dsi->regs)) { +dev_err (dev,"Couldn't init regmap\n" ); +return PTR_ERR (dsi->regs); + } + + dsi->bus_clk =devm_clk_get (dev, clk_name); +if (IS_ERR (dsi->bus_clk)) { +dev_err (dev,"Couldn't get the DSI bus clock\n" ); + ret =PTR_ERR (dsi->bus_clk); + goto err_regmap; + }else { + ret =regmap_mmio_attach_clk (dsi->regs, dsi->bus_clk); +if (ret) + goto err_bus_clk; + } +if (dsi->variant->has_mod_clk) { dsi->mod_clk =devm_clk_get (dev,"mod" );if (IS_ERR (dsi->mod_clk)) {dev_err (dev,"Couldn't get the DSI mod clock\n" ); -return PTR_ERR (dsi->mod_clk); + ret =PTR_ERR (dsi->mod_clk); + goto err_attach_clk; } }
@@ -1167,6 +1181,14 @@ static int sun6i_dsi_probe(struct platform_device *pdev) err_unprotect_clk:if (dsi->variant->has_mod_clk)clk_rate_exclusive_put (dsi->mod_clk); +err_attach_clk: +if (!IS_ERR (dsi->bus_clk)) +regmap_mmio_detach_clk (dsi->regs); +err_bus_clk: +if (!IS_ERR (dsi->bus_clk)) +clk_put (dsi->bus_clk); +err_regmap: +regmap_exit (dsi->regs);return ret; }
@@ -1181,6 +1203,11 @@ static int sun6i_dsi_remove(struct platform_device *pdev)if (dsi->variant->has_mod_clk)clk_rate_exclusive_put (dsi->mod_clk); +if (!IS_ERR (dsi->bus_clk)) +regmap_mmio_detach_clk (dsi->regs); + +regmap_exit (dsi->regs); +return 0 ; }
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v12 5/7 drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support
In reply to Jagan TekiThe MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have DSI_SCLK gating so add compatible for Allwinner A64 with uninitialized has_mod_clk driver.
---
Changes for v12:
- none
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +7 -0
@@ -1270,11 +1270,18 @@ static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi = { .has_mod_clk = true, }; +static const struct sun6i_dsi_variant sun50i_a64_mipi_dsi = { +}; +static const struct of_device_id sun6i_dsi_of_table[] = { { .compatible ="allwinner,sun6i-a31-mipi-dsi" , .data = &sun6i_a31_mipi_dsi, }, + { + .compatible ="allwinner,sun50i-a64-mipi-dsi" , + .data = &sun50i_a64_mipi_dsi, + }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, sun6i_dsi_of_table);
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v12 6/7 arm64: dts: allwinner: a64: Add MIPI DSI pipeline
In reply to Jagan TekiAdd MIPI DSI pipeline for Allwinner A64.
- dsi node, with A64 compatible since it doesn't support DSI_SCLK gating unlike A33
- dphy node, with A64 compatible with A33 fallback since DPHY on A64 and A33 is similar
- finally, attach the dsi_in to tcon0 for complete MIPI DSI
---
Changes for v12:
- none
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +37 -0
@@ -382,6 +382,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; };
@@ -1014,6 +1020,37 @@ status = "disabled"; }; + dsi: dsi@1ca0000 { + compatible = "allwinner,sun50i-a64-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; + }; + }; + }; + + dphy: d-phy@1ca1000 { + compatible = "allwinner,sun50i-a64-mipi-dphy", + "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi";
Signature · 6 lines
2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v12 7/7 arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel
In reply to Jagan TekiThis patch add support for Bananapi S070WV20-CT16 DSI panel to BPI-M64 board.
DSI panel connected via board DSI port with,
- DLDO1 as VCC-DSI supply
- DCDC1 as VDD supply
- PD7 gpio for lcd enable pin
- PD6 gpio for lcd reset pin
- PD5 gpio for backlight enable pin
---
Changes for v12:
- none
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +31 -0
@@ -45,6 +45,7 @@ #include "sun50i-a64.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "BananaPi-M64";
@@ -56,6 +57,14 @@ serial1 = &uart1; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <1 2 4 8 16 32 64 128 255>; + default-brightness-level = <2>; + enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PD5 */ + }; + chosen { stdout-path = "serial0:115200n8"; };
@@ -116,6 +125,24 @@ status = "okay"; }; +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; /* VCC3V3-DSI */ + status = "okay"; + + panel@0 { + compatible = "bananapi,s070wv20-ct16-icn6211"; + reg = <0>; + enable-gpios = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* LCD-PWR-EN: PD7 */ + reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD6 */ + vdd-supply = <®_dcdc1>; + backlight = <&backlight>; + }; +}; + &ehci0 { status = "okay"; };
@@ -206,6 +233,10 @@ status = "okay"; }; +&r_pwm { + status = "okay"; +}; + &r_rsb { status = "okay";
Signature · 6 lines
2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel