Skip to contentSkip to conversation

ath11k: fix pdev when invoking ath11k_wmi_send_twt_enable_cmd()

PATCH In review John Crispin 2 participants 5 messages Dec 13, 2019 – Dec 18, 2019 Qualcomm Atheros ATH11K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 ath11k: fix pdev when invoking ath11k_wmi_send_twt_enable_cmd()

From: Pradeep Kumar Chitrapu <[email protected]>

The code currently uses the wrong pdev id when enabling TWT. Fix this by using the correct ones.

Fixes e65a616f4e74 ("ath11k: add TWT support")
---
 drivers/net/wireless/ath/ath11k/mac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath11k/mac.c +2 -2
index fec268b9b711..b229b0b3e0bd 100644
@@ -1917,9 +1917,9 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_TWT) {
 		if (info->twt_requester || info->twt_responder)
-			ath11k_wmi_send_twt_enable_cmd(ar, ar->pdev_idx);
+			ath11k_wmi_send_twt_enable_cmd(ar, ar->pdev->pdev_id);
 		else
-			ath11k_wmi_send_twt_disable_cmd(ar, ar->pdev_idx);
+			ath11k_wmi_send_twt_disable_cmd(ar, ar->pdev->pdev_id);
 		if (vif->type == NL80211_IFTYPE_AP)
 			ath11k_debugfs_twt(arvif, info->twt_requester);
 	}
Signature · 7 lines
2.20.1


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#1 lore raw

PATCH v2 2/2 ath11k: set the BA buffer size to 256 when HE is enabled

From: Pradeep Kumar Chitrapu <[email protected]>

This patch sets the correct BA buffer size when we are in HE mode. Without this change we are not able to receive 256 bitmapped BA frames.

---
 drivers/net/wireless/ath/ath11k/mac.c | 14 ++++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h |  2 ++
 2 files changed, 16 insertions(+)
drivers/net/wireless/ath/ath11k/mac.c +14 -0
index b229b0b3e0bd..82df8af57369 100644
@@ -1758,6 +1758,20 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 		if (ret)
 			ath11k_warn(ar->ab, "failed to update bcn template: %d\n",
 				    ret);
+
+		if (vif->bss_conf.he_support) {
+			ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+							    WMI_VDEV_PARAM_BA_MODE,
+							    WMI_BA_MODE_BUFFER_SIZE_256);
+			if (ret)
+				ath11k_warn(ar->ab,
+					    "failed to set BA BUFFER SIZE 256 for vdev: %d\n",
+					    arvif->vdev_id);
+			else
+				ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+					   "Set BA BUFFER SIZE 256 for VDEV: %d\n",
+					   arvif->vdev_id);
+		}
 	}
 
 	if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
drivers/net/wireless/ath/ath11k/wmi.h +2 -0
index f62f796305aa..284794dadd87 100644
@@ -54,6 +54,7 @@ struct wmi_tlv {
 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
 
+#define WMI_BA_MODE_BUFFER_SIZE_256  3
 /*
  * HW mode config type replicated from FW header
  * @WMI_HOST_HW_MODE_SINGLE: Only one PHY is active.
@@ -1004,6 +1005,7 @@ enum wmi_tlv_vdev_param {
 	WMI_VDEV_PARAM_HE_RANGE_EXT,
 	WMI_VDEV_PARAM_ENABLE_BCAST_PROBE_RESPONSE,
 	WMI_VDEV_PARAM_FILS_MAX_CHANNEL_GUARD_TIME,
+	WMI_VDEV_PARAM_BA_MODE = 0x7e,
 	WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE = 0x87,
 	WMI_VDEV_PARAM_PROTOTYPE = 0x8000,
 	WMI_VDEV_PARAM_BSS_COLOR,
Signature · 7 lines
2.20.1


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#2 lore raw
In reply to John Crispin
Quoted 7 lines · John Crispin

The code currently uses the wrong pdev id when enabling TWT. Fix this by using the correct ones.

Fixes e65a616f4e74 ("ath11k: add TWT support")

2 patches applied to ath-next branch of ath.git, thanks.

485add35771b ath11k: fix pdev when invoking ath11k_wmi_send_twt_enable_cmd() aacb46223e08 ath11k: set the BA buffer size to 256 when HE is enabled

Signature · 8 lines
https://patchwork.kernel.org/patch/11290725/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#3 lore raw
In reply to John Crispin
Quoted 7 lines · John Crispin

The code currently uses the wrong pdev id when enabling TWT. Fix this by using the correct ones.

Fixes e65a616f4e74 ("ath11k: add TWT support")

2 patches applied to ath-next branch of ath.git, thanks.

485add35771b ath11k: fix pdev when invoking ath11k_wmi_send_twt_enable_cmd() aacb46223e08 ath11k: set the BA buffer size to 256 when HE is enabled

Signature · 3 lines
https://patchwork.kernel.org/patch/11290725/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#4 lore raw
In reply to John Crispin
Quoted 8 lines · John Crispin

From: Pradeep Kumar Chitrapu <[email protected]>

The code currently uses the wrong pdev id when enabling TWT. Fix this by using the correct ones.

Fixes e65a616f4e74 ("ath11k: add TWT support")

I noticed only after I applied this, but the s-o-b line is in wrong order. Pradeep, being the author, should have his s-o-b line first.

Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches