ath11k: set TxBf parameters after vdev start
PATCH 1/1 ath11k: set TxBf parameters after vdev start
From: Bhagavathi Perumal S <[email protected]>
The channel info parameters are required by the firmware to process TxBf parameters. Currently TxBf is passed prior to the channel info. This patch moves TxBf setup after the channel setup.
--- drivers/net/wireless/ath/ath11k/mac.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath11k/mac.c +5 -6
@@ -4216,12 +4216,6 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw, arvif->vdev_id, ret); } - ret =ath11k_mac_set_txbf_conf (arvif); -if (ret) { -ath11k_warn (ar->ab,"failed to set txbf conf for vdev %d: %d\n" , - arvif->vdev_id, ret); - } -ath11k_dp_vdev_tx_attach (ar, arvif);mutex_unlock (&ar->conf_mutex);
@@ -4573,6 +4567,11 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif, arg.channel.freq, arg.vdev_id); } + ret =ath11k_mac_set_txbf_conf (arvif); +if (ret) +ath11k_warn (ab,"failed to set txbf conf for vdev %d: %d\n" , + arvif->vdev_id, ret); +return 0 ; }
Signature · 1 line
2.20.1
Quoted 7 lines · John Crispin
The channel info parameters are required by the firmware to process TxBf parameters. Currently TxBf is passed prior to the channel info. This patch moves TxBf setup after the channel setup.
Signed-off-by John Crispin <[email protected]>Signed-off-by Bhagavathi Perumal S <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
5815719dd271 ath11k: set TxBf parameters after vdev start
Signature · 3 lines
https://patchwork.kernel.org/patch/11298249/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 7 lines · John Crispin
The channel info parameters are required by the firmware to process TxBf parameters. Currently TxBf is passed prior to the channel info. This patch moves TxBf setup after the channel setup.
Signed-off-by John Crispin <[email protected]>Signed-off-by Bhagavathi Perumal S <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
5815719dd271 ath11k: set TxBf parameters after vdev start
Signature · 8 lines
https://patchwork.kernel.org/patch/11298249/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k