dt-bindings: Add vendor prefix for Xinpeng Technology
Subsystems (4)
PATCH v4 1/3 dt-bindings: Add vendor prefix for Xinpeng Technology
From: Heiko Stuebner <[email protected]>
Shenzhen Xinpeng Technology Co., Ltd produces for example display panels.
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -1056,6 +1056,8 @@ patternProperties: description: Extreme Engineering Solutions (X-ES) "^xillybus,.*": description: Xillybus Ltd. + "^xinpeng,.*": + description: Shenzhen Xinpeng Technology Co., Ltd "^xlnx,.*": description: Xilinx "^xunlong,.*":
Signature · 6 lines
2.24.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v4 2/3 dt-bindings: display: panel: Add binding document for Xinpeng XPP055C272
From: Heiko Stuebner <[email protected]>
The XPP055C272 is a 5.5" 720x1280 DSI display.
changes in v4:
- fix id (Maxime)
- drop port (Maxime)
changes in v2:
- add size info into binding title (Sam)
- add more required properties (Sam)
--- .../display/panel/xinpeng,xpp055c272.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml new file +47 -0
@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <[email protected]> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: xinpeng,xpp055c272 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi@ff450000 { + panel@0 { + compatible = "xinpeng,xpp055c272"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +...
Signature · 6 lines
2.24.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4 2/3] dt-bindings: display: panel: Add binding document for Xinpeng XPP055C272
Quoted 11 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The XPP055C272 is a 5.5" 720x1280 DSI display.
changes in v4:
- fix id (Maxime)
- drop port (Maxime)
changes in v2:
- add size info into binding title (Sam)
- add more required properties (Sam)
Quoted 2 lines
Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Sam Ravnborg <[email protected]>
Thanks!
Maxime
Re: [PATCH v4 2/3] dt-bindings: display: panel: Add binding document for Xinpeng XPP055C272
In reply to Heiko StuebnerQuoted 11 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The XPP055C272 is a 5.5" 720x1280 DSI display.
changes in v4:
- fix id (Maxime)
- drop port (Maxime)
changes in v2:
- add size info into binding title (Sam)
- add more required properties (Sam)
Quoted 7 lines
Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Sam Ravnborg <[email protected]>--- .../display/panel/xinpeng,xpp055c272.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
PATCH v4 3/3 drm/panel: add panel driver for Xinpeng XPP055C272 panels
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
Base on the somewhat similar Rocktech driver but adapted for panel-specific init of the XPP055C272.
changes in v3:
- remove wrong negative sync flags from display-mode to fix a display artifact of the output getting move a tiny bit to the right
changes in v2:
- move to drm-panel-internal backlight handling (Sam)
- adapt to changes that happened to drm_panel structs+functions (Sam)
- sort includes (Sam)
- drop unnecessary DRV_NAME constant (Sam)
- do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on in panel prepare (not init_sequence) to keep symmetric (Sam)
--- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-xinpeng-xpp055c272.c | 400 ++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
drivers/gpu/drm/panel/Kconfig +10 -0
@@ -355,4 +355,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA help Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel + +config DRM_PANEL_XINPENG_XPP055C272 + tristate "Xinpeng XPP055C272 panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Xinpeng + XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI + system interfaces. endmenu
drivers/gpu/drm/panel/Makefile +1 -0
@@ -38,3 +38,4 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o +obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c new file +400 -0
400 lines not on this page · raw message
Signature · 6 lines
2.24.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4 3/3] drm/panel: add panel driver for Xinpeng XPP055C272 panels
Hi Sam,
Am Dienstag, 17. Dezember 2019, 23:29:06 CET schrieb Heiko Stuebner:
Quoted 16 lines
From: Heiko Stuebner <[email protected]>
Base on the somewhat similar Rocktech driver but adapted for panel-specific init of the XPP055C272.
changes in v3:
- remove wrong negative sync flags from display-mode to fix a display artifact of the output getting move a tiny bit to the right
changes in v2:
- move to drm-panel-internal backlight handling (Sam)
- adapt to changes that happened todrm_panelstructs+functions (Sam)
- sort includes (Sam)
- drop unnecessaryDRV_NAMEconstant (Sam)
- domipi_dsi_dcs_exit_sleep_modeandmipi_dsi_dcs_set_display_onin panel prepare (notinit_sequence) to keep symmetric (Sam)
Quoted 1 line
Signed-off-by Heiko Stuebner <[email protected]>
are you satisfied with the changes, requested last weekend?
Thanks
Heiko
Quoted 432 lines
--- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-xinpeng-xpp055c272.c | 400 ++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.cdrivers/gpu/drm/panel/Kconfig +10
-0@@ -355,4 +355,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA help Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel + +config DRM_PANEL_XINPENG_XPP055C272 + tristate "Xinpeng XPP055C272 panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Xinpeng + XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI + system interfaces. endmenudrivers/gpu/drm/panel/Makefile +1
-0@@ -38,3 +38,4 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o +obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.odrivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c new file +390
-0@@ -0,0 +1,400 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Xinpeng xpp055c272 5.5" MIPI-DSI panel driver +* Copyright (C) 2019 Theobroma Systems Design und Consulting GmbH +* +* based on +* +* Rockteck jh057n00900 5.5" MIPI-DSI panel driver +* Copyright (C) Purism SPC 2019 +*/ + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +/* Manufacturer specific Commands send via DSI */ +#define XPP055C272_CMD_ALL_PIXEL_OFF 0x22 +#define XPP055C272_CMD_ALL_PIXEL_ON 0x23 +#define XPP055C272_CMD_SETDISP 0xb2 +#define XPP055C272_CMD_SETRGBIF 0xb3 +#define XPP055C272_CMD_SETCYC 0xb4 +#define XPP055C272_CMD_SETBGP 0xb5 +#define XPP055C272_CMD_SETVCOM 0xb6 +#define XPP055C272_CMD_SETOTP 0xb7 +#define XPP055C272_CMD_SETPOWER_EXT 0xb8 +#define XPP055C272_CMD_SETEXTC 0xb9 +#define XPP055C272_CMD_SETMIPI 0xbA +#define XPP055C272_CMD_SETVDC 0xbc +#define XPP055C272_CMD_SETPCR 0xbf +#define XPP055C272_CMD_SETSCR 0xc0 +#define XPP055C272_CMD_SETPOWER 0xc1 +#define XPP055C272_CMD_SETECO 0xc6 +#define XPP055C272_CMD_SETPANEL 0xcc +#define XPP055C272_CMD_SETGAMMA 0xe0 +#define XPP055C272_CMD_SETEQ 0xe3 +#define XPP055C272_CMD_SETGIP1 0xe9 +#define XPP055C272_CMD_SETGIP2 0xea + +struct xpp055c272 { +struct device *dev; +struct drm_panel panel; +struct gpio_desc *reset_gpio; +struct regulator *vci; +struct regulator *iovcc; +bool prepared; +}; + +static inline struct xpp055c272 *panel_to_xpp055c272 (struct drm_panel *panel) +{ + return container_of(panel, struct xpp055c272, panel); +} + +#define dsi_generic_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static int xpp055c272_init_sequence (struct xpp055c272 *ctx) +{ +struct mipi_dsi_device *dsi =to_mipi_dsi_device (ctx->dev); +struct device *dev = ctx->dev; + +/* +* Init sequence was supplied by the panel vendor without much +* documentation. +*/ +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETEXTC ,0xf1 ,0x12 ,0x83 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETMIPI , +0x33 ,0x81 ,0x05 ,0xf9 ,0x0e ,0x0e ,0x00 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x44 ,0x25 , +0x00 ,0x91 ,0x0a ,0x00 ,0x00 ,0x02 ,0x4f ,0x01 , +0x00 ,0x00 ,0x37 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETPOWER_EXT ,0x25 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETPCR ,0x02 ,0x11 ,0x00 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETRGBIF , +0x0c ,0x10 ,0x0a ,0x50 ,0x03 ,0xff ,0x00 ,0x00 , +0x00 ,0x00 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETSCR , +0x73 ,0x73 ,0x50 ,0x50 ,0x00 ,0x00 ,0x08 ,0x70 , +0x00 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETVDC ,0x46 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETPANEL ,0x0b ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETCYC ,0x80 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETDISP ,0xc8 ,0x12 ,0x30 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETEQ , +0x07 ,0x07 ,0x0B ,0x0B ,0x03 ,0x0B ,0x00 ,0x00 , +0x00 ,0x00 ,0xFF ,0x00 ,0xC0 ,0x10 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETPOWER , +0x53 ,0x00 ,0x1e ,0x1e ,0x77 ,0xe1 ,0xcc ,0xdd , +0x67 ,0x77 ,0x33 ,0x33 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETECO ,0x00 ,0x00 ,0xff , +0xff ,0x01 ,0xff ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETBGP ,0x09 ,0x09 ); +msleep (20 ); + +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETVCOM ,0x87 ,0x95 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETGIP1 , +0xc2 ,0x10 ,0x05 ,0x05 ,0x10 ,0x05 ,0xa0 ,0x12 , +0x31 ,0x23 ,0x3f ,0x81 ,0x0a ,0xa0 ,0x37 ,0x18 , +0x00 ,0x80 ,0x01 ,0x00 ,0x00 ,0x00 ,0x00 ,0x80 , +0x01 ,0x00 ,0x00 ,0x00 ,0x48 ,0xf8 ,0x86 ,0x42 , +0x08 ,0x88 ,0x88 ,0x80 ,0x88 ,0x88 ,0x88 ,0x58 , +0xf8 ,0x87 ,0x53 ,0x18 ,0x88 ,0x88 ,0x81 ,0x88 , +0x88 ,0x88 ,0x00 ,0x00 ,0x00 ,0x01 ,0x00 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETGIP2 , +0x00 ,0x1a ,0x00 ,0x00 ,0x00 ,0x00 ,0x02 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x1f ,0x88 ,0x81 ,0x35 , +0x78 ,0x88 ,0x88 ,0x85 ,0x88 ,0x88 ,0x88 ,0x0f , +0x88 ,0x80 ,0x24 ,0x68 ,0x88 ,0x88 ,0x84 ,0x88 , +0x88 ,0x88 ,0x23 ,0x10 ,0x00 ,0x00 ,0x1c ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x30 ,0x05 , +0xa0 ,0x00 ,0x00 ,0x00 ,0x00 ); +dsi_generic_write_seq (dsi,XPP055C272_CMD_SETGAMMA , +0x00 ,0x06 ,0x08 ,0x2a ,0x31 ,0x3f ,0x38 ,0x36 , +0x07 ,0x0c ,0x0d ,0x11 ,0x13 ,0x12 ,0x13 ,0x11 , +0x18 ,0x00 ,0x06 ,0x08 ,0x2a ,0x31 ,0x3f ,0x38 , +0x36 ,0x07 ,0x0c ,0x0d ,0x11 ,0x13 ,0x12 ,0x13 , +0x11 ,0x18 ); + +msleep (60 ); + +DRM_DEV_DEBUG_DRIVER (dev,"Panel init sequence done\n" ); +return 0 ; +} + +static int xpp055c272_unprepare (struct drm_panel *panel) +{ +struct xpp055c272 *ctx =panel_to_xpp055c272 (panel); +struct mipi_dsi_device *dsi =to_mipi_dsi_device (ctx->dev); +int ret; + +if (!ctx->prepared) +return 0 ; + + ret =mipi_dsi_dcs_set_display_off (dsi); +if (ret <0 ) +DRM_DEV_ERROR (ctx->dev,"failed to set display off: %d\n" , + ret); + +mipi_dsi_dcs_enter_sleep_mode (dsi); +if (ret <0 ) { +DRM_DEV_ERROR (ctx->dev,"failed to enter sleep mode: %d\n" , + ret); +return ret; + } + +regulator_disable (ctx->iovcc); +regulator_disable (ctx->vci); + + ctx->prepared = false; + +return 0 ; +} + +static int xpp055c272_prepare (struct drm_panel *panel) +{ +struct xpp055c272 *ctx =panel_to_xpp055c272 (panel); +struct mipi_dsi_device *dsi =to_mipi_dsi_device (ctx->dev); +int ret; + +if (ctx->prepared) +return 0 ; + +DRM_DEV_DEBUG_DRIVER (ctx->dev,"Resetting the panel\n" ); + ret =regulator_enable (ctx->vci); +if (ret <0 ) { +DRM_DEV_ERROR (ctx->dev, +"Failed to enable vci supply: %d\n" , ret); +return ret; + } + ret =regulator_enable (ctx->iovcc); +if (ret <0 ) { +DRM_DEV_ERROR (ctx->dev, +"Failed to enable iovcc supply: %d\n" , ret); + goto disable_vci; + } + +gpiod_set_value_cansleep (ctx->reset_gpio,1 ); +/* T6: 10us */ +usleep_range (10 ,20 ); +gpiod_set_value_cansleep (ctx->reset_gpio,0 ); + +/* T8: 20ms */ +msleep (20 ); + + ret =xpp055c272_init_sequence (ctx); +if (ret <0 ) { +DRM_DEV_ERROR (ctx->dev,"Panel init sequence failed: %d\n" , + ret); + goto disable_iovcc; + } + + ret =mipi_dsi_dcs_exit_sleep_mode (dsi); +if (ret <0 ) { +DRM_DEV_ERROR (ctx->dev,"Failed to exit sleep mode: %d\n" , ret); + goto disable_iovcc; + } + +/* T9: 120ms */ +msleep (120 ); + + ret =mipi_dsi_dcs_set_display_on (dsi); +if (ret <0 ) { +DRM_DEV_ERROR (ctx->dev,"Failed to set display on: %d\n" , ret); + goto disable_iovcc; + } + +msleep (50 ); + + ctx->prepared = true; + +return 0 ; + +disable_iovcc: +regulator_disable (ctx->iovcc); +disable_vci: +regulator_disable (ctx->vci); +return ret; +} + +static const struct drm_display_mode default_mode = { + .hdisplay =720 , + .hsync_start =720 +40 , + .hsync_end =720 +40 +10 , + .htotal =720 +40 +10 +40 , + .vdisplay =1280 , + .vsync_start =1280 +22 , + .vsync_end =1280 +22 +4 , + .vtotal =1280 +22 +4 +11 , + .vrefresh =60 , + .clock =64000 , + .width_mm =68 , + .height_mm =121 , +}; + +static int xpp055c272_get_modes (struct drm_panel *panel, +struct drm_connector *connector) +{ +struct xpp055c272 *ctx =panel_to_xpp055c272 (panel); +struct drm_display_mode *mode; + + mode =drm_mode_duplicate (connector->dev, &default_mode); +if (!mode) { +DRM_DEV_ERROR (ctx->dev,"Failed to add mode %ux%u@%u\n" , + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); +return -ENOMEM ; + } + +drm_mode_set_name (mode); + + mode->type =DRM_MODE_TYPE_DRIVER |DRM_MODE_TYPE_PREFERRED ; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; +drm_mode_probed_add (connector, mode); + +return 1 ; +} + +static const struct drm_panel_funcs xpp055c272_funcs = { + .unprepare = xpp055c272_unprepare, + .prepare = xpp055c272_prepare, + .get_modes = xpp055c272_get_modes, +}; + +static int xpp055c272_probe (struct mipi_dsi_device *dsi) +{ +struct device *dev = &dsi->dev; +struct xpp055c272 *ctx; +int ret; + + ctx =devm_kzalloc (dev,sizeof (*ctx),GFP_KERNEL ); +if (!ctx) +return -ENOMEM ; + + ctx->reset_gpio =devm_gpiod_get_optional (dev,"reset" ,GPIOD_OUT_LOW ); +if (IS_ERR (ctx->reset_gpio)) { +DRM_DEV_ERROR (dev,"cannot get reset gpio\n" ); +return PTR_ERR (ctx->reset_gpio); + } + + ctx->vci =devm_regulator_get (dev,"vci" ); +if (IS_ERR (ctx->vci)) { + ret =PTR_ERR (ctx->vci); +if (ret != -EPROBE_DEFER ) +DRM_DEV_ERROR (dev, +"Failed to request vci regulator: %d\n" , + ret); +return ret; + } + + ctx->iovcc =devm_regulator_get (dev,"iovcc" ); +if (IS_ERR (ctx->iovcc)) { + ret =PTR_ERR (ctx->iovcc); +if (ret != -EPROBE_DEFER ) +DRM_DEV_ERROR (dev, +"Failed to request iovcc regulator: %d\n" , + ret); +return ret; + } + +mipi_dsi_set_drvdata (dsi, ctx); + + ctx->dev = dev; + + dsi->lanes =4 ; + dsi->format =MIPI_DSI_FMT_RGB888 ; + dsi->mode_flags =MIPI_DSI_MODE_VIDEO |MIPI_DSI_MODE_VIDEO_BURST | +MIPI_DSI_MODE_LPM |MIPI_DSI_MODE_EOT_PACKET ; + +drm_panel_init (&ctx->panel, &dsi->dev, &xpp055c272_funcs, +DRM_MODE_CONNECTOR_DSI ); + + ret =drm_panel_of_backlight (&ctx->panel); +if (ret) { +DRM_DEV_ERROR (dev,"Failed to find backlight: %d\n" , ret); +return ret; + } + +drm_panel_add (&ctx->panel); + + ret =mipi_dsi_attach (dsi); +if (ret <0 ) { +DRM_DEV_ERROR (dev,"mipi_dsi_attach failed: %d\n" , ret); +drm_panel_remove (&ctx->panel); +return ret; + } + +return 0 ; +} + +static void xpp055c272_shutdown (struct mipi_dsi_device *dsi) +{ +struct xpp055c272 *ctx =mipi_dsi_get_drvdata (dsi); +int ret; + + ret =drm_panel_unprepare (&ctx->panel); +if (ret <0 ) +DRM_DEV_ERROR (&dsi->dev,"Failed to unprepare panel: %d\n" , + ret); + + ret =drm_panel_disable (&ctx->panel); +if (ret <0 ) +DRM_DEV_ERROR (&dsi->dev,"Failed to disable panel: %d\n" , + ret); +} + +static int xpp055c272_remove (struct mipi_dsi_device *dsi) +{ +struct xpp055c272 *ctx =mipi_dsi_get_drvdata (dsi); +int ret; + +xpp055c272_shutdown (dsi); + + ret =mipi_dsi_detach (dsi); +if (ret <0 ) +DRM_DEV_ERROR (&dsi->dev,"Failed to detach from DSI host: %d\n" , + ret); + +drm_panel_remove (&ctx->panel); + +return 0 ; +} + +static const struct of_device_id xpp055c272_of_match[] = { + { .compatible ="xinpeng,xpp055c272" }, + {/* sentinel */ } +}; +MODULE_DEVICE_TABLE (of, xpp055c272_of_match); + +static struct mipi_dsi_driver xpp055c272_driver = { + .driver = { + .name ="panel-xinpeng-xpp055c272" , + .of_match_table = xpp055c272_of_match,
drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c line 400
Quoted 10 lines
drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c new file +10
-0+ }, + .probe = xpp055c272_probe, + .remove = xpp055c272_remove, + .shutdown = xpp055c272_shutdown, +}; +module_mipi_dsi_driver (xpp055c272_driver); + +MODULE_AUTHOR ("Heiko Stuebner <[email protected]>" ); +MODULE_DESCRIPTION ("DRM driver for Xinpeng xpp055c272 MIPI DSI panel" ); +MODULE_LICENSE ("GPL v2" );
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 10 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
Shenzhen Xinpeng Technology Co., Ltd produces for example display panels.
Signed-off-by Heiko Stuebner <[email protected]>Acked-by Sam Ravnborg <[email protected]>--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)