beagle-x15: add am5729-beagleboneai.dtb
PATCH 1/1 beagle-x15: add am5729-beagleboneai.dtb
--- conf/machine/beagle-x15.conf | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
conf/machine/beagle-x15.conf +4 -1
@@ -4,7 +4,10 @@ require conf/machine/include/dra7xx.inc -KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb" +KERNEL_DEVICETREE = " \ + am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ +" MACHINE_GUI_CLASS = "bigscreen"
Signature · 1 line
2.17.1
Quoted 3 lines · Theodore A. Roth
Signed-off-by Theodore A. Roth <[email protected]>--- conf/machine/beagle-x15.conf | 5 ++++-
Why add this to the X15 machine? The Beagebone AI is not an X15, the catch all for AM57xx machines seems to be am57xx-evm.conf, which already has the am5729-beagleboneai.dtb.
Thinking more about this, the defining features of the AI might warrant a new machine conf.
Andrew
Quoted 29 lines
1 file changed, 4 insertions(+), 1 deletion(-)conf/machine/beagle-x15.conf +4
-2@@ -4,7 +4,10 @@ require conf/machine/include/dra7xx.inc -KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb" +KERNEL_DEVICETREE = " \ + am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ +" MACHINE_GUI_CLASS = "bigscreen" -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
View/Reply Online (#12591): https://lists.yoctoproject.org/g/meta-ti/message/12591
Mute This Topic: https://lists.yoctoproject.org/mt/69386296/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Quoted 10 lines · Andrew F. Davis
Quoted 3 lines · Theodore A. Roth
Signed-off-by Theodore A. Roth <[email protected]>--- conf/machine/beagle-x15.conf | 5 ++++-Why add this to the X15 machine? The Beagebone AI is not an X15, the catch all for AM57xx machines seems to be am57xx-evm.conf, which already has the am5729-beagleboneai.dtb.
I tried building an image using the am57xx-evm.conf machine in the first place, but it didn't build the wic image, so I added it to the X15 (since they have the same processor). The X15 machine seemed a good place to put it due to the similarities. Seemed similar to what is going on in the beaglebone.conf machine file (lots of very different boards handled in a single machine file).
Quoted 3 lines
Thinking more about this, the defining features of the AI might warrant a new machine conf.
I'm not opposed to adding a new beagle-ai.conf machine. Looking at the X15 machine conf, it seems that there would not be much different for the BBAI other than possibly MACHINE_GUI_CLASS and SERIAL_CONSOLES.
Any ideas or hints on what would be different in the machine conf for BBAI versus the X15?
I'm also not sure why beagle-x15.conf has UBIFS stuff it it since that board has an eMMC nand flash device on it.
Thanks for the feedback.
Ted Roth
Quoted 33 lines
Andrew
Quoted 29 lines
1 file changed, 4 insertions(+), 1 deletion(-)conf/machine/beagle-x15.conf +4
-2@@ -4,7 +4,10 @@ require conf/machine/include/dra7xx.inc -KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb" +KERNEL_DEVICETREE = " \ + am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ +" MACHINE_GUI_CLASS = "bigscreen" -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
View/Reply Online (#12591): https://lists.yoctoproject.org/g/meta-ti/message/12591
Mute This Topic: https://lists.yoctoproject.org/mt/69386296/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Quoted 19 lines · Theodore A. Roth
Quoted 10 lines · Andrew F. Davis
Quoted 3 lines · Theodore A. Roth
Signed-off-by Theodore A. Roth <[email protected]>--- conf/machine/beagle-x15.conf | 5 ++++-Why add this to the X15 machine? The Beagebone AI is not an X15, the catch all for AM57xx machines seems to be am57xx-evm.conf, which already has the am5729-beagleboneai.dtb.
I tried building an image using the am57xx-evm.conf machine in the first place, but it didn't build the wic image, so I added it to the X15 (since they have the same processor). The X15 machine seemed a good place to put it due to the similarities. Seemed similar to what is going on in the beaglebone.conf machine file (lots of very different boards handled in a single machine file).
Quoted 1 line
Quoted 7 lines
Quoted 2 lines
Thinking more about this, the defining features of the AI might warrant a new machine conf.
I'm not opposed to adding a new beagle-ai.conf machine. Looking at the X15 machine conf, it seems that there would not be much different for the BBAI other than possibly
MACHINE_GUI_CLASSandSERIAL_CONSOLES.
Seems the only difference is in the display (the serial console looks the same for both).
The AM57xx-EVM is basically just an x15 but with a touchscreen attached:
MACHINE_FEATURES += "touchscreen"
The X15 on the other-hand uses HDMI:
MACHINE_GUI_CLASS = "bigscreen"
If we can remove these differences (auto detect them in userspace or something), then we can combine am57xx-evm.conf and beagle-x15.conf into just one machine target, which to me is the best way to it (reduce targets means less testing, etc..)
Quoted 2 lines
Any ideas or hints on what would be different in the machine conf for BBAI versus the X15?
Looks like for your wic image IMAGE_FSTYPES could be changed from "tar.xz" to "tar.xz wic.xz" so both are generated using the am57xx-evm.conf target. What do you use the wic image for anyway, I'm not familiar with it?
Quoted 4 lines
I'm also not sure why beagle-x15.conf has UBIFS stuff it it since that board has an eMMC nand flash device on it.
Possibly left over from when it was forked from am57xx-evm.conf. So as above, re-combining to one superset machine will help prevent this kind of thing.
Andrew
Quoted 37 lines
Thanks for the feedback.
Ted Roth
Quoted 33 lines
Andrew
Quoted 29 lines
1 file changed, 4 insertions(+), 1 deletion(-)conf/machine/beagle-x15.conf +4
-2@@ -4,7 +4,10 @@ require conf/machine/include/dra7xx.inc -KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb" +KERNEL_DEVICETREE = " \ + am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ +" MACHINE_GUI_CLASS = "bigscreen" -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
View/Reply Online (#12591): https://lists.yoctoproject.org/g/meta-ti/message/12591
Mute This Topic: https://lists.yoctoproject.org/mt/69386296/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Quoted 8 lines · Theodore A. Roth
Quoted 7 lines · Andrew F. Davis
Quoted 3 lines · Theodore A. Roth
Signed-off-by Theodore A. Roth <[email protected]>--- conf/machine/beagle-x15.conf | 5 ++++-
Quoted 6 lines
Quoted 3 lines
Why add this to the X15 machine? The Beagebone AI is not an X15, the catch all for AM57xx machines seems to be am57xx-evm.conf, which already has the am5729-beagleboneai.dtb.
I tried building an image using the am57xx-evm.conf machine in the first place, but it didn't build the wic image,
Well, wic image type can be added to "am57xx-evm" quite easily.
Quoted 4 lines
so I added it to the X15 (since they have the
same processor). The X15 machine seemed a good place to put it due to the similarities. Seemed similar to what is going on in the beaglebone.conf machine file (lots of very different boards handled in a single machine file).
Both "beaglebone" and "beagle-x15" machine types and configs were added only for user convenience, as it is not very obvious for newcomers that beaglebone == am335x-evm and beagle-x15 == am57xx-evm
Unfortunately, neither beaglebone nor beagle-x15 get enough testing attention, as they are normally tested as part of am335x-evm and am57xx-evm builds.
Another option considered was to simply have those as symlinks poiting to corresponding EVM configs. That would also alleviate the testing deficiency mentioned above.
Quoted 4 lines
Quoted 2 lines
Thinking more about this, the defining features of the AI might warrant a new machine conf.
I'm not opposed to adding a new beagle-ai.conf machine. Looking at
Well, I'm not convinced we need another machine definition that's not getting well tested on its own.
Quoted 2 lines
the X15 machine conf, it seems that there would not be much different for the BBAI other than possibly
MACHINE_GUI_CLASSandSERIAL_CONSOLES.
MACHINE_GUI_CLASS is somewhat outdated - it may have been used by X11 before, but right now the only place it's used is in meta-oe linux.inc to control the splash screen logo size. We don't use linux.inc from meta-oe anyway.
The difference in SERIAL_CONSOLES is more significant, but X15 uses the same UART as AM57 EVM, not sure about AI. Either way, different UARTs can be listed in SERIAL_CONSOLES, like we already do for am335x-evm:
+ # Normally AM335 boards use ttyS0, but ICE uses ttyS3, so try both
+ SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS3"
Quoted 5 lines
Any ideas or hints on what would be different in the machine conf for BBAI versus the X15?
I'm also not sure why beagle-x15.conf has UBIFS stuff it it since that board has an eMMC nand flash device on it.
Probably cut-n-paste error.
Signature · 1 line
Denys
Quoted 46 lines
Thanks for the feedback.
Ted Roth
Quoted 27 lines
Andrew
Quoted 23 lines
1 file changed, 4 insertions(+), 1 deletion(-)conf/machine/beagle-x15.conf +4
-2@@ -4,7 +4,10 @@ require conf/machine/include/dra7xx.inc -KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb" +KERNEL_DEVICETREE = " \ + am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ +" MACHINE_GUI_CLASS = "bigscreen" -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
Quoted 6 lines
Quoted 6 lines
View/Reply Online (#12591): https://lists.yoctoproject.org/g/meta-ti/message/12591
Mute This Topic: https://lists.yoctoproject.org/mt/69386296/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.View/Reply Online (#12596): https://lists.yoctoproject.org/g/meta-ti/message/12596
Mute This Topic: https://lists.yoctoproject.org/mt/69386296/1051543
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-