qemuboot-mips: Enable VGA device
PATCH 1/2 qemuboot-mips: Enable VGA device
This helps in booting weston images ( core-image-weston ) with fbdev backend, without this westons initialization of fbdev backend fails because it does not get correct frame buffer settings and exits pre-maturely
--- meta/conf/machine/include/qemuboot-mips.inc | 5 +++++ 1 file changed, 5 insertions(+)
meta/conf/machine/include/qemuboot-mips.inc +5 -0
@@ -5,3 +5,8 @@ QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" QB_OPT_APPEND = "-show-cursor -usb -device usb-tablet" # Add the 'virtio-rng-pci' device otherwise the guest may run out of entropy QB_OPT_APPEND += "-object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0" + +# For graphics to work we need to define the VGA device as well as the necessary USB devices +QB_OPT_APPEND = "-show-cursor -device VGA,edid=on" +QB_OPT_APPEND += "-device qemu-xhci -device usb-tablet -device usb-kbd" +
Signature · 1 line
2.24.1
PATCH 2/2 busybox: Update inittab
Add stdin/stdout/stderr symlinks in case when not using hotplug Disable ctrl+alt+del, not used much
Mount swap if defined
--- meta/recipes-core/busybox/files/inittab | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
meta/recipes-core/busybox/files/inittab +8 -4
@@ -8,11 +8,17 @@ ::sysinit:/bin/mkdir -p /dev/pts ::sysinit:/bin/mount -t devpts devpts /dev/pts ::sysinit:/bin/mount -a - +::sysinit:/sbin/swapon -a +null::sysinit:/bin/ln -sf /proc/self/fd /dev/fd +null::sysinit:/bin/ln -sf /proc/self/fd/0 /dev/stdin +null::sysinit:/bin/ln -sf /proc/self/fd/1 /dev/stdout +null::sysinit:/bin/ln -sf /proc/self/fd/2 /dev/stderr +# set hostname +null::sysinit:/bin/busybox hostname -F /etc/hostname ::sysinit:/etc/init.d/rcS # Stuff to do before rebooting -::ctrlaltdel:/sbin/reboot +#::ctrlaltdel:/sbin/reboot ::shutdown:/etc/init.d/rcK ::shutdown:/sbin/swapoff -a ::shutdown:/bin/umount -a -r
@@ -20,5 +26,3 @@ # Stuff to do when restarting the init process ::restart:/sbin/init -# set hostname -null::sysinit:/bin/busybox hostname -F /etc/hostname
Signature · 1 line
2.24.1
Re: [OE-core] [PATCH 2/2] busybox: Update inittab
Quoted 16 lines · Khem Raj
Add stdin/stdout/stderr symlinks in case when not using hotplug Disable ctrl+alt+del, not used much
Mount swap if definedSigned-off-by Khem Raj <[email protected]>--- meta/recipes-core/busybox/files/inittab | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)meta/recipes-core/busybox/files/inittab +0
-0@@ -8,11 +8,17 @@ ::sysinit:/bin/mkdir -p /dev/pts
meta/recipes-core/busybox/files/inittab line 17
Quoted 10 lines
meta/recipes-core/busybox/files/inittab +7
-1::sysinit:/bin/mount -t devpts devpts /dev/pts ::sysinit:/bin/mount -a - +::sysinit:/sbin/swapon -a +null::sysinit:/bin/ln -sf /proc/self/fd /dev/fd +null::sysinit:/bin/ln -sf /proc/self/fd/0 /dev/stdin +null::sysinit:/bin/ln -sf /proc/self/fd/1 /dev/stdout +null::sysinit:/bin/ln -sf /proc/self/fd/2 /dev/stderr +# set hostname +null::sysinit:/bin/busybox hostname -F /etc/hostname
Trying to send the output of these commands to /dev/null seems to go against the fix previously made to inittab to stop doing that?
https://git.openembedded.org/openembedded-core/commit/?id=82de49b899bca915259ea7ea149f50e1401c2426
Quoted 22 lines
meta/recipes-core/busybox/files/inittab +1
-4::sysinit:/etc/init.d/rcS # Stuff to do before rebooting -::ctrlaltdel:/sbin/reboot +#::ctrlaltdel:/sbin/reboot ::shutdown:/etc/init.d/rcK ::shutdown:/sbin/swapoff -a ::shutdown:/bin/umount -a -r@@ -20,5 +26,3 @@ # Stuff to do when restarting the init process ::restart:/sbin/init -# set hostname -null::sysinit:/bin/busybox hostname -F /etc/hostname --2.24.1
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Re: [OE-core] [PATCH 2/2] busybox: Update inittab
Quoted 32 lines · Andre McCurdy
Quoted 16 lines · Khem Raj
Add stdin/stdout/stderr symlinks in case when not using hotplug Disable ctrl+alt+del, not used much
Mount swap if definedSigned-off-by Khem Raj <[email protected]>--- meta/recipes-core/busybox/files/inittab | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)meta/recipes-core/busybox/files/inittab +0
-0@@ -8,11 +8,17 @@ ::sysinit:/bin/mkdir -p /dev/ptsmeta/recipes-core/busybox/files/inittab line 17
Quoted 10 lines
meta/recipes-core/busybox/files/inittab +7
-1::sysinit:/bin/mount -t devpts devpts /dev/pts ::sysinit:/bin/mount -a - +::sysinit:/sbin/swapon -a +null::sysinit:/bin/ln -sf /proc/self/fd /dev/fd +null::sysinit:/bin/ln -sf /proc/self/fd/0 /dev/stdin +null::sysinit:/bin/ln -sf /proc/self/fd/1 /dev/stdout +null::sysinit:/bin/ln -sf /proc/self/fd/2 /dev/stderr +# set hostname +null::sysinit:/bin/busybox hostname -F /etc/hostnameTrying to send the output of these commands to
/dev/nullseems to go against the fix previously made to inittab to stop doing that?
Quoted 2 lines
https://git.openembedded.org/openembedded-core/commit/?id=82de49b899bca915259ea7ea149f50e1401c2426
It was to avoid additional messages on stdout, so remove null there should be ok if it fixes initramfs please send a patch
Quoted 22 lines
Quoted 22 lines
meta/recipes-core/busybox/files/inittab +1
-4::sysinit:/etc/init.d/rcS # Stuff to do before rebooting -::ctrlaltdel:/sbin/reboot +#::ctrlaltdel:/sbin/reboot ::shutdown:/etc/init.d/rcK ::shutdown:/sbin/swapoff -a ::shutdown:/bin/umount -a -r@@ -20,5 +26,3 @@ # Stuff to do when restarting the init process ::restart:/sbin/init -# set hostname -null::sysinit:/bin/busybox hostname -F /etc/hostname --2.24.1
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Quoted 15 lines · Khem Raj
This helps in booting weston images ( core-image-weston ) with fbdev backend, without this westons initialization of fbdev backend fails because it does not get correct frame buffer settings and exits pre-maturely
Signed-off-by Khem Raj <[email protected]>--- meta/conf/machine/include/qemuboot-mips.inc | 5 +++++ 1 file changed, 5 insertions(+)meta/conf/machine/include/qemuboot-mips.inc +0
-0
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" · line 12
Quoted 8 lines
meta/conf/machine/include/qemuboot-mips.inc +5
-0@@ -5,3 +5,8 @@ QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" QB_OPT_APPEND = "-show-cursor -usb -device usb-tablet" # Add the 'virtio-rng-pci' device otherwise the guest may run out of entropy QB_OPT_APPEND += "-object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0" + +# For graphics to work we need to define the VGA device as well as the necessary USB devices +QB_OPT_APPEND = "-show-cursor -device VGA,edid=on" +QB_OPT_APPEND += "-device qemu-xhci -device usb-tablet -device usb-kbd" +
The change is probably good but it causes consistent failures in out testimage runs for mips and mips64:
https://autobuilder.yoctoproject.org/typhoon/#/builders/60/builds/1429
https://autobuilder.yoctoproject.org/typhoon/#/builders/102/builds/196
https://autobuilder.yoctoproject.org/typhoon/#/builders/74/builds/1431
all due to errors appearing in the logs.
Cheers,
Richard
Quoted 32 lines · Richard Purdie
Review
Quoted 11 lines · Khem Raj
This helps in booting weston images ( core-image-weston ) with fbdev backend, without this westons initialization of fbdev backend fails because it does not get correct frame buffer settings and exits pre-maturely
Signed-off-by Khem Raj <[email protected]>--- meta/conf/machine/include/qemuboot-mips.inc | 5 +++++ 1 file changed, 5 insertions(+)(quoted diff) +0
-0b/meta/conf/machine/include/qemuboot-mips.inc
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" · line 6
Quoted 6 lines
index
978820a2e0..52cb28a5d2100644meta/conf/machine/include/qemuboot-mips.inc +0
-0@@ -5,3 +5,8 @@ QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" QB_OPT_APPEND = "-show-cursor -usb -device usb-tablet" # Add the 'virtio-rng-pci' device otherwise the guest may run out ofentropy
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" · line 7
Quoted 1 line
meta/conf/machine/include/qemuboot-mips.inc +0
-0QB_OPT_APPEND += "-object rng-random,filename=/dev/urandom,id=rng0-device virtio-rng-pci,rng=rng0"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" · line 9
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +2
-0+ +# For graphics to work we need to define the VGA device as well as thenecessary USB devices
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 console=tty" · line 12
Quoted 3 lines
meta/conf/machine/include/qemuboot-mips.inc +3
-0+QB_OPT_APPEND = "-show-cursor -device VGA,edid=on" +QB_OPT_APPEND += "-device qemu-xhci -device usb-tablet -device usb-kbd" +The change is probably good but it causes consistent failures in out testimage runs for mips and mips64:
Quoted 5 lines
https://autobuilder.yoctoproject.org/typhoon/#/builders/60/builds/1429
https://autobuilder.yoctoproject.org/typhoon/#/builders/102/builds/196
https://autobuilder.yoctoproject.org/typhoon/#/builders/74/builds/1431all due to errors appearing in the logs.
Is it due to glibc 2.31 that we were discussing or a separate issue
Quoted 7 lines
Cheers,
Richard
Quoted 42 lines · Khem Raj
Quoted 38 lines · Richard Purdie
Quoted 1 line · Khem Raj
This helps in booting weston images ( core-image-weston ) with
fbdev
Quoted 1 line
backend, without this westons initialization of fbdev backend
fails
Review
Quoted 9 lines
because it does not get correct frame buffer settings and exits pre-maturely
Signed-off-by Khem Raj <[email protected]>--- meta/conf/machine/include/qemuboot-mips.inc | 5 +++++ 1 file changed, 5 insertions(+)(quoted diff) +0
-0b/meta/conf/machine/include/qemuboot-mips.inc
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0
Quoted 4 lines
index
978820a2e0..52cb28a5d2100644meta/conf/machine/include/qemuboot-mips.inc +0
-0@@ -5,3 +5,8 @@ QB_KERNEL_CMDLINE_APPEND = "console=ttyS0console=tty"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 6
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +0
-0QB_OPT_APPEND = "-show-cursor -usb -device usb-tablet" # Add the 'virtio-rng-pci' device otherwise the guest may runout of entropy
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 7
Quoted 1 line
meta/conf/machine/include/qemuboot-mips.inc +0
-0QB_OPT_APPEND += "-object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng- pci,rng=rng0"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 9
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +2
-0+ +# For graphics to work we need to define the VGA device as wellas the necessary USB devices
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 11
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +2
-0+QB_OPT_APPEND = "-show-cursor -device VGA,edid=on" +QB_OPT_APPEND += "-device qemu-xhci -device usb-tablet -deviceusb-kbd"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 12
Quoted 1 line
meta/conf/machine/include/qemuboot-mips.inc +1
-0+The change is probably good but it causes consistent failures in out
testimage runs for mips and mips64:
Quoted 7 lines
Quoted 5 lines
https://autobuilder.yoctoproject.org/typhoon/#/builders/60/builds/1429
https://autobuilder.yoctoproject.org/typhoon/#/builders/102/builds/196
https://autobuilder.yoctoproject.org/typhoon/#/builders/74/builds/1431all due to errors appearing in the logs.
Is it due to glibc 2.31 that we were discussing or a separate issue
Separate, there are two issues.
Cheers,
Richard
OK I can reproduce atleast couple of them
Quoted 58 lines · Richard Purdie
Quoted 42 lines · Khem Raj
Quoted 38 lines · Richard Purdie
Quoted 1 line · Khem Raj
This helps in booting weston images ( core-image-weston ) with
fbdev
Quoted 1 line
backend, without this westons initialization of fbdev backend
fails
Review
Quoted 9 lines
because it does not get correct frame buffer settings and exits pre-maturely
Signed-off-by Khem Raj <[email protected]>--- meta/conf/machine/include/qemuboot-mips.inc | 5 +++++ 1 file changed, 5 insertions(+)(quoted diff) +0
-0b/meta/conf/machine/include/qemuboot-mips.inc
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0
Quoted 4 lines
index
978820a2e0..52cb28a5d2100644meta/conf/machine/include/qemuboot-mips.inc +0
-0@@ -5,3 +5,8 @@ QB_KERNEL_CMDLINE_APPEND = "console=ttyS0console=tty"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 6
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +0
-0QB_OPT_APPEND = "-show-cursor -usb -device usb-tablet" # Add the 'virtio-rng-pci' device otherwise the guest may runout of entropy
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 7
Quoted 1 line
meta/conf/machine/include/qemuboot-mips.inc +0
-0QB_OPT_APPEND += "-object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng- pci,rng=rng0"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 9
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +2
-0+ +# For graphics to work we need to define the VGA device as wellas the necessary USB devices
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 11
Quoted 2 lines
meta/conf/machine/include/qemuboot-mips.inc +2
-0+QB_OPT_APPEND = "-show-cursor -device VGA,edid=on" +QB_OPT_APPEND += "-device qemu-xhci -device usb-tablet -deviceusb-kbd"
meta/conf/machine/include/qemuboot-mips.inc QB_KERNEL_CMDLINE_APPEND = "console=ttyS0 · line 12
Quoted 1 line
meta/conf/machine/include/qemuboot-mips.inc +1
-0+The change is probably good but it causes consistent failures in out
testimage runs for mips and mips64:Quoted 7 lines
Quoted 5 lines
https://autobuilder.yoctoproject.org/typhoon/#/builders/60/builds/1429
https://autobuilder.yoctoproject.org/typhoon/#/builders/102/builds/196
https://autobuilder.yoctoproject.org/typhoon/#/builders/74/builds/1431all due to errors appearing in the logs.
Is it due to glibc 2.31 that we were discussing or a separate issue
Separate, there are two issues.
Cheers,
Richard