Skip to contentSkip to conversation

media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

PATCH In review Sasha Levin 2 participants 212 messages Jan 16, 2020 Page 2 of 2

Subsystems (44)
lore
Share & tools
lore
author maintainer
#199 lore raw

PATCH 239/251 packet: fix data-race in fanout_flow_is_huge()

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit b756ad928d98e5ef0b74af7546a6a31a8dadde00 ]

KCSAN reported the following data-race [1]

Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it.

Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value.

[1]

BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover

read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1:

 fanout_flow_is_huge net/packet/af_packet.c:1303 [inline]
 fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353
 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453
 deliver_skb net/core/dev.c:1888 [inline]
 dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958
 xmit_one net/core/dev.c:3195 [inline]
 dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215
 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179
 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795
 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173
 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471
 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657
 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311
 __sys_sendmmsg+0x123/0x350 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0:

 fanout_flow_is_huge net/packet/af_packet.c:1306 [inline]
 fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353
 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453
 deliver_skb net/core/dev.c:1888 [inline]
 dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958
 xmit_one net/core/dev.c:3195 [inline]
 dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215
 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179
 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795
 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173
 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471
 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657
 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311
 __sys_sendmmsg+0x123/0x350 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes 3b3a5b0aab5b ("packet: rollover huge flows before small flows")
Cc Willem de Bruijn <[email protected]>
---
 net/packet/af_packet.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
net/packet/af_packet.c +9 -3
index 47a862cc7b34..fb643945e424 100644
@@ -1332,15 +1332,21 @@ static void packet_sock_destruct(struct sock *sk)
 
 static bool fanout_flow_is_huge(struct packet_sock *po, struct sk_buff *skb)
 {
-	u32 rxhash;
+	u32 *history = po->rollover->history;
+	u32 victim, rxhash;
 	int i, count = 0;
 
 	rxhash = skb_get_hash(skb);
 	for (i = 0; i < ROLLOVER_HLEN; i++)
-		if (po->rollover->history[i] == rxhash)
+		if (READ_ONCE(history[i]) == rxhash)
 			count++;
 
-	po->rollover->history[prandom_u32() % ROLLOVER_HLEN] = rxhash;
+	victim = prandom_u32() % ROLLOVER_HLEN;
+
+	/* Avoid dirtying the cache line if possible */
+	if (READ_ONCE(history[victim]) != rxhash)
+		WRITE_ONCE(history[victim], rxhash);
+
 	return count > (ROLLOVER_HLEN >> 1);
 }
 
Signature · 1 line
2.20.1
author maintainer
#200 lore raw

PATCH 240/251 tty: serial: imx: use the sg count from dma_map_sg

In reply to Sasha Levin

From: Peng Fan <[email protected]>

[ Upstream commit 596fd8dffb745afcebc0ec6968e17fe29f02044c ]

The dmaengine_prep_slave_sg needs to use sg count returned by dma_map_sg, not use sport->dma_tx_nents, because the return value of dma_map_sg is not always same with "nents".

Fixes b4cdc8f61beb ("serial: imx: add DMA support for imx6q")
---
 drivers/tty/serial/imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/imx.c +1 -1
index 6d596c635159..e75bd8d7e6f6 100644
@@ -548,7 +548,7 @@ static void imx_dma_tx(struct imx_port *sport)
 		dev_err(dev, "DMA mapping error for TX.\n");
 		return;
 	}
-	desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
+	desc = dmaengine_prep_slave_sg(chan, sgl, ret,
 					DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 	if (!desc) {
 		dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
Signature · 1 line
2.20.1
author maintainer
#201 lore raw

PATCH 241/251 tty: serial: pch_uart: correct usage of dma_unmap_sg

In reply to Sasha Levin

From: Peng Fan <[email protected]>

[ Upstream commit 74887542fdcc92ad06a48c0cca17cdf09fc8aa00 ]

Per Documentation/DMA-API-HOWTO.txt,
To unmap a scatterlist, just call:

	dma_unmap_sg(dev, sglist, nents, direction);

.. note::

The 'nents' argument to the dma_unmap_sg call must be the _same_ one you passed into the dma_map_sg call, it should _NOT_ be the 'count' value _returned_ from the dma_map_sg call.

However in the driver, priv->nent is directly assigned with value returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap, this breaks the API usage.

So introduce a new entry orig_nent to remember 'nents'.

Fixes da3564ee027e ("pch_uart: add multi-scatter processing")
---
 drivers/tty/serial/pch_uart.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/tty/serial/pch_uart.c +4 -1
index 42caccb5e87e..30b577384a1d 100644
@@ -252,6 +252,7 @@ struct eg20t_port {
 	struct dma_chan			*chan_rx;
 	struct scatterlist		*sg_tx_p;
 	int				nent;
+	int				orig_nent;
 	struct scatterlist		sg_rx;
 	int				tx_dma_use;
 	void				*rx_buf_virt;
@@ -806,9 +807,10 @@ static void pch_dma_tx_complete(void *arg)
 	}
 	xmit->tail &= UART_XMIT_SIZE - 1;
 	async_tx_ack(priv->desc_tx);
-	dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
+	dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
 	priv->nent = 0;
+	priv->orig_nent = 0;
 	kfree(priv->sg_tx_p);
 	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 }
@@ -1033,6 +1035,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 		dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 		return 0;
 	}
+	priv->orig_nent = num;
 	priv->nent = nent;
 
 	for (i = 0; i < nent; i++, sg++) {
Signature · 1 line
2.20.1
author maintainer
#202 lore raw

PATCH 242/251 rtc: msm6242: Fix reading of 10-hour digit

In reply to Sasha Levin

From: Kars de Jong <[email protected]>

[ Upstream commit e34494c8df0cd96fc432efae121db3212c46ae48 ]

The driver was reading the wrong register as the 10-hour digit due to a misplaced ')'. It was in fact reading the 1-second digit register due to this bug.

Also remove the use of a magic number for the hour mask and use the define for it which was already present.

---
 drivers/rtc/rtc-msm6242.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/rtc/rtc-msm6242.c +2 -1
index c1c5c4e3b3b4..c981301efbe5 100644
@@ -132,7 +132,8 @@ static int msm6242_read_time(struct device *dev, struct rtc_time *tm)
 		      msm6242_read(priv, MSM6242_SECOND1);
 	tm->tm_min  = msm6242_read(priv, MSM6242_MINUTE10) * 10 +
 		      msm6242_read(priv, MSM6242_MINUTE1);
-	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10 & 3)) * 10 +
+	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10) &
+		       MSM6242_HOUR10_HR_MASK) * 10 +
 		      msm6242_read(priv, MSM6242_HOUR1);
 	tm->tm_mday = msm6242_read(priv, MSM6242_DAY10) * 10 +
 		      msm6242_read(priv, MSM6242_DAY1);
Signature · 1 line
2.20.1
author maintainer
#203 lore raw

PATCH 243/251 scsi: qla4xxx: fix double free bug

In reply to Sasha Levin

From: Pan Bian <[email protected]>

[ Upstream commit 3fe3d2428b62822b7b030577cd612790bdd8c941 ]

The variable init_fw_cb is released twice, resulting in a double free bug. The call to the function dma_free_coherent() before goto is removed to get rid of potential double free.

---
 drivers/scsi/qla4xxx/ql4_mbx.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/scsi/qla4xxx/ql4_mbx.c +0 -3
index c291fdff1b33..ea3b77ba12a2 100644
@@ -641,9 +641,6 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 
 	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
-		dma_free_coherent(&ha->pdev->dev,
-				  sizeof(struct addr_ctrl_blk),
-				  init_fw_cb, init_fw_cb_dma);
 		goto exit_init_fw_cb;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#204 lore raw

PATCH 244/251 scsi: bnx2i: fix potential use after free

In reply to Sasha Levin

From: Pan Bian <[email protected]>

[ Upstream commit 29d28f2b8d3736ac61c28ef7e20fda63795b74d9 ]

The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues.

Fixes a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr")
---
 drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/bnx2i/bnx2i_iscsi.c +1 -1
index 133901fd3e35..6d1f8b22bd83 100644
@@ -915,12 +915,12 @@ void bnx2i_free_hba(struct bnx2i_hba *hba)
 	INIT_LIST_HEAD(&hba->ep_ofld_list);
 	INIT_LIST_HEAD(&hba->ep_active_list);
 	INIT_LIST_HEAD(&hba->ep_destroy_list);
-	pci_dev_put(hba->pcidev);
 
 	if (hba->regview) {
 		pci_iounmap(hba->pcidev, hba->regview);
 		hba->regview = NULL;
 	}
+	pci_dev_put(hba->pcidev);
 	bnx2i_free_mp_bdt(hba);
 	bnx2i_release_free_cid_que(hba);
 	iscsi_host_free(shost);
Signature · 1 line
2.20.1
author maintainer
#205 lore raw

PATCH 245/251 scsi: target: core: Fix a pr_debug() argument

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit c941e0d172605731de9b4628bd4146d35cf2e7d6 ]

Print the string for which conversion failed instead of printing the function name twice.

Fixes 2650d71e244f ("target: move transport ID handling to the core")
Cc Christoph Hellwig <[email protected]>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/target/target_core_fabric_lib.c +1 -1
index cb6497ce4b61..6e75095af681 100644
@@ -130,7 +130,7 @@ static int srp_get_pr_transport_id(
 	memset(buf + 8, 0, leading_zero_bytes);
 	rc = hex2bin(buf + 8 + leading_zero_bytes, p, count);
 	if (rc < 0) {
-		pr_debug("hex2bin failed for %s: %d\n", __func__, rc);
+		pr_debug("hex2bin failed for %s: %d\n", p, rc);
 		return rc;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#206 lore raw

PATCH 246/251 powerpc/powernv: Disable native PCIe port management

In reply to Sasha Levin

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 9d72dcef891030545f39ad386a30cf91df517fb2 ]

On PowerNV the PCIe topology is (currently) managed by the powernv platform code in Linux in cooperation with the platform firmware. Linux's native PCIe port service drivers operate independently of both and this can cause problems.

The main issue is that the portbus driver will conflict with the platform specific hotplug driver (pnv_php) over ownership of the MSI used to notify the host when a hotplug event occurs. The portbus driver claims this MSI on behalf of the individual port services because the same interrupt is used for hotplug events, PMEs (on root ports), and link bandwidth change notifications. The portbus driver will always claim the interrupt even if the individual port service drivers, such as pciehp, are compiled out.

The second, bigger, problem is that the hotplug port service driver fundamentally does not work on PowerNV. The platform assumes that all PCI devices have a corresponding arch-specific handle derived from the DT node for the device (pci_dn) and without one the platform will not allow a PCI device to be enabled. This problem is largely due to historical baggage, but it can't be resolved without significant re-factoring of the platform PCI support.

We can fix these problems in the interim by setting the "pcie_ports_disabled" flag during platform initialisation. The flag indicates the platform owns the PCIe ports which stops the portbus driver from being registered.

This does have the side effect of disabling all port services drivers that is: AER, PME, BW notifications, hotplug, and DPC. However, this is not a huge disadvantage on PowerNV since these services are either unused or handled through other means.

Fixes 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
---
 arch/powerpc/platforms/powernv/pci.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/powerpc/platforms/powernv/pci.c +17 -0
index 98cc8ba07c23..00dbf1e895a9 100644
@@ -923,6 +923,23 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
+#ifdef CONFIG_PCIEPORTBUS
+	/*
+	 * On PowerNV PCIe devices are (currently) managed in cooperation
+	 * with firmware. This isn't *strictly* required, but there's enough
+	 * assumptions baked into both firmware and the platform code that
+	 * it's unwise to allow the portbus services to be used.
+	 *
+	 * We need to fix this eventually, but for now set this flag to disable
+	 * the portbus driver. The AER service isn't required since that AER
+	 * events are handled via EEH. The pciehp hotplug driver can't work
+	 * without kernel changes (and portbus binding breaks pnv_php). The
+	 * other services also require some thinking about how we're going
+	 * to integrate them.
+	 */
+	pcie_ports_disabled = true;
+#endif
+
 	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);
Signature · 1 line
2.20.1
author maintainer
#207 lore raw

PATCH 247/251 dmaengine: ti: edma: fix missed failure handling

In reply to Sasha Levin

From: Chuhong Yuan <[email protected]>

[ Upstream commit 340049d453682a9fe8d91fe794dd091730f4bb25 ]

When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it.

Fixes 1be5336bc7ba ("dmaengine: edma: New device tree binding")
---
 drivers/dma/edma.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/dma/edma.c +4 -2
index 72f31e837b1d..56ec72468745 100644
@@ -2340,8 +2340,10 @@ static int edma_probe(struct platform_device *pdev)
 
 		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
 					    sizeof(*ecc->tc_list), GFP_KERNEL);
-		if (!ecc->tc_list)
-			return -ENOMEM;
+		if (!ecc->tc_list) {
+			ret = -ENOMEM;
+			goto err_reg1;
+		}
 
 		for (i = 0;; i++) {
 			ret = of_parse_phandle_with_fixed_args(node, "ti,tptcs",
Signature · 1 line
2.20.1
author maintainer
#208 lore raw

PATCH 248/251 drm/radeon: fix bad DMA from INTERRUPT_CNTL2

In reply to Sasha Levin

From: Sam Bobroff <[email protected]>

[ Upstream commit 62d91dd2851e8ae2ca552f1b090a3575a4edf759 ]

The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always be safe.

Fixes d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
---
 drivers/gpu/drm/radeon/cik.c  | 4 ++--
 drivers/gpu/drm/radeon/r600.c | 4 ++--
 drivers/gpu/drm/radeon/si.c   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)
drivers/gpu/drm/radeon/cik.c +2 -2
index b99f3e59011c..5fcb5869a489 100644
@@ -7026,8 +7026,8 @@ static int cik_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* XXX this should actually be a bus address, not an MC address. same on older asics */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
drivers/gpu/drm/radeon/r600.c +2 -2
index f2eac6b6c46a..9569c35f8766 100644
@@ -3697,8 +3697,8 @@ int r600_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
drivers/gpu/drm/radeon/si.c +2 -2
index b75d809c292e..919d389869ce 100644
@@ -6018,8 +6018,8 @@ static int si_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#209 lore raw

PATCH 249/251 arm64: dts: juno: Fix UART frequency

In reply to Sasha Levin

From: Andre Przywara <[email protected]>

[ Upstream commit 39a1a8941b27c37f79508426e27a2ec29829d66c ]

Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT.

Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!).

Fix this to correct the baud rate divisor calculation on the Juno board.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf
[2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf

Fixes 71f867ec130e ("arm64: Add Juno board device tree.")
---
 arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/arm/juno-clocks.dtsi +2 -2
index 25352ed943e6..00bcbf7688c7 100644
@@ -8,10 +8,10 @@
  */
 
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7273800hz {
+	soc_uartclk: refclk7372800hz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <7273800>;
+		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
Signature · 1 line
2.20.1
author maintainer
#210 lore raw

PATCH 250/251 powerpc/archrandom: fix arch_get_random_seed_int()

In reply to Sasha Levin

From: Ard Biesheuvel <[email protected]>

[ Upstream commit b6afd1234cf93aa0d71b4be4788c47534905f0be ]

Commit 01c9348c7620ec65

powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*

updated arch_get_random_[int|long]() to be NOPs, and moved the hardware RNG backing to arch_get_random_seed_[int|long]() instead. However, it failed to take into account that arch_get_random_int() was implemented in terms of arch_get_random_long(), and so we ended up with a version of the former that is essentially a NOP as well.

Fix this by calling arch_get_random_seed_long() from arch_get_random_seed_int() instead.

Fixes 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*")
---
 arch/powerpc/include/asm/archrandom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/include/asm/archrandom.h +1 -1
index 85e88f7a59c0..9ff848e3c4a6 100644
@@ -27,7 +27,7 @@ static inline int arch_get_random_seed_int(unsigned int *v)
 	unsigned long val;
 	int rc;
 
-	rc = arch_get_random_long(&val);
+	rc = arch_get_random_seed_long(&val);
 	if (rc)
 		*v = val;
 
Signature · 1 line
2.20.1
author maintainer
#211 lore raw

PATCH 251/251 IB/iser: Fix dma_nents type definition

In reply to Sasha Levin

From: Max Gurtovoy <[email protected]>

[ Upstream commit c1545f1a200f4adc4ef8dd534bf33e2f1aa22c2f ]

The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid future mismatch between types, define dma_nents as an integer instead of unsigned.

Fixes 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL")
---
 drivers/infiniband/ulp/iser/iscsi_iser.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/ulp/iser/iscsi_iser.h +1 -1
index cb48e22afff7..a3614f7f0007 100644
@@ -197,7 +197,7 @@ struct iser_data_buf {
 	struct scatterlist *sg;
 	int                size;
 	unsigned long      data_len;
-	unsigned int       dma_nents;
+	int                dma_nents;
 };
 
 /* fwd declarations */
Signature · 1 line
2.20.1