Skip to contentSkip to conversation

media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

PATCH In review Sasha Levin 2 participants 212 messages Jan 16, 2020 Page 1 of 2

Subsystems (44)
lore
Share & tools
lore
author maintainer
#22 lore raw

PATCH 63/251 fbdev: chipsfb: remove set but not used variable 'size'

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 8e71fa5e4d86bedfd26df85381d65d6b4c860020 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/video/fbdev/chipsfb.c: In function 'chipsfb_pci_init':
drivers/video/fbdev/chipsfb.c:352:22: warning:
variable 'size' set but not used [-Wunused-but-set-variable]

Fixes 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK").
Cc Daniel Vetter <[email protected]>
Cc Christophe Leroy <[email protected]>
[b.zolnierkie: minor commit summary and description fixups]
---
 drivers/video/fbdev/chipsfb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/video/fbdev/chipsfb.c +1 -2
index 59abdc6a97f6..314b7eceb81c 100644
@@ -350,7 +350,7 @@ static void init_chips(struct fb_info *p, unsigned long addr)
 static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
 {
 	struct fb_info *p;
-	unsigned long addr, size;
+	unsigned long addr;
 	unsigned short cmd;
 	int rc = -ENODEV;
 
@@ -362,7 +362,6 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
 	if ((dp->resource[0].flags & IORESOURCE_MEM) = 0)
 		goto err_disable;
 	addr = pci_resource_start(dp, 0);
-	size = pci_resource_len(dp, 0);
 	if (addr = 0)
 		goto err_disable;
 
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 72/251 keys: Timestamp new keys

In reply to Sasha Levin

From: David Howells <[email protected]>

[ Upstream commit 7c1857bdbdf1e4c541e45eab477ee23ed4333ea4 ]

Set the timestamp on new keys rather than leaving it unset.

Fixes 31d5a79d7f3d ("KEYS: Do LRU discard in full keyrings")
---
 security/keys/key.c | 1 +
 1 file changed, 1 insertion(+)
security/keys/key.c +1 -0
index 7276d1a009d4..280b4feccdc0 100644
@@ -296,6 +296,7 @@ struct key *key_alloc(struct key_type *type, const char *desc,
 	key->gid = gid;
 	key->perm = perm;
 	key->restrict_link = restrict_link;
+	key->last_used_at = ktime_get_real_seconds();
 
 	if (!(flags & KEY_ALLOC_NOT_IN_QUOTA))
 		key->flags |= 1 << KEY_FLAG_IN_QUOTA;
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 80/251 drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit 13649101a25c53c87f4ab98a076dfe61f3636ab1 ]

Currently, the expression for calculating RON is always going to result in zero no matter the value of ram->mr[1] because the ! operator has higher precedence than the shift >> operator. I believe the missing parentheses around the expression before appying the ! operator will result in the desired result.

[ Note, not tested ]

Detected by CoveritScan, CID#1324005 ("Operands don't affect result")

Fixes c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
---
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/gddr3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nvkm/subdev/fb/gddr3.c +1 -1
index 60ece0a8a2e1..1d2d6bae73cd 100644
@@ -87,7 +87,7 @@ nvkm_gddr3_calc(struct nvkm_ram *ram)
 		WR  = (ram->next->bios.timing[2] & 0x007f0000) >> 16;
 		/* XXX: Get these values from the VBIOS instead */
 		DLL = !(ram->mr[1] & 0x1);
-		RON = !(ram->mr[1] & 0x300) >> 8;
+		RON = !((ram->mr[1] & 0x300) >> 8);
 		break;
 	default:
 		return -ENOSYS;
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 81/251 drm/nouveau/pmu: don't print reply values if exec is false

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit b1d03fc36ec9834465a08c275c8d563e07f6f6bf ]

Currently the uninitialized values in the array reply are printed out when exec is false and nvkm_pmu_send has not updated the array. Avoid confusion by only dumping out these values if they have been actually updated.

Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")

Fixes ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)")
---
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/memx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/nouveau/nvkm/subdev/pmu/memx.c +2 -2
index e6f74168238c..2ef9e942f43a 100644
@@ -87,10 +87,10 @@ nvkm_memx_fini(struct nvkm_memx **pmemx, bool exec)
 	if (exec) {
 		nvkm_pmu_send(pmu, reply, PROC_MEMX, MEMX_MSG_EXEC,
 			      memx->base, finish);
+		nvkm_debug(subdev, "Exec took %uns, PMU_IN %08x\n",
+			   reply[0], reply[1]);
 	}
 
-	nvkm_debug(subdev, "Exec took %uns, PMU_IN %08x\n",
-		   reply[0], reply[1]);
 	kfree(memx);
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 104/251 ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()

In reply to Sasha Levin

From: Tony Lindgren <[email protected]>

[ Upstream commit 7f0d078667a494466991aa7133f49594f32ff6a2 ]

Commit 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") made the call to _enable() conditional based on no oh->rst_lines_cnt. This caused the return value to be potentially uninitialized. Curiously we see no compiler warnings for this, probably as this gets inlined.

We call _setup_reset() from _setup() and only _setup_postsetup() if the return value is zero. Currently the return value can be uninitialized for cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set.

Fixes 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior")
Cc Paul Walmsley <[email protected]>
Cc Tero Kristo <[email protected]>
---
 arch/arm/mach-omap2/omap_hwmod.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/omap_hwmod.c +1 -1
index bfc74954540c..9421b78f869d 100644
@@ -2588,7 +2588,7 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh)
  */
 static int _setup_reset(struct omap_hwmod *oh)
 {
-	int r;
+	int r = 0;
 
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 107/251 spi: tegra114: clear packed bit for unpacked mode

In reply to Sasha Levin

From: Sowjanya Komatineni <[email protected]>

[ Upstream commit 7b3d10cdf54b8bc1dc0da21faed9789ac4da3684 ]

Fixes Clear packed bit when not using packed mode.

Packed bit is not cleared when not using packed mode. This results in transfer timeouts for the unpacked mode transfers followed by the packed mode transfers.

---
 drivers/spi/spi-tegra114.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/spi/spi-tegra114.c +2 -0
index 705f515863d4..d98c502a9c47 100644
@@ -730,6 +730,8 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi,
 
 	if (tspi->is_packed)
 		command1 |= SPI_PACKED;
+	else
+		command1 &= ~SPI_PACKED;
 
 	command1 &= ~(SPI_CS_SEL_MASK | SPI_TX_EN | SPI_RX_EN);
 	tspi->cur_direction = 0;
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 108/251 spi: tegra114: fix for unpacked mode transfers

In reply to Sasha Levin

From: Sowjanya Komatineni <[email protected]>

[ Upstream commit 1a89ac5b91895127f7c586ec5075c3753ca25501 ]

Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked mode when transfer length is not a multiple of requested bits per word.

unpacked mode transfers fails when the transfer includes partial bytes in the last word.

Total words to be written/read to/from FIFO is computed based on transfer length and bits per word. Unpacked mode includes 0 padding bytes for partial words to align with bits per word and these extra bytes are also accounted for calculating bytes left to transfer in the current driver.

This causes extra bytes access of tx/rx buffers along with buffer index position crossing actual length where remain_len becomes negative and due to unsigned type, negative value is a 32 bit representation of signed value and transferred bytes never meets the actual transfer length resulting in transfer timeout and a hang.

This patch fixes this with proper computation of the actual bytes to fill in FIFO during transmit and the actual bytes to read from FIFO during receive ignoring 0 padded bytes.

---
 drivers/spi/spi-tegra114.c | 43 +++++++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 7 deletions(-)
drivers/spi/spi-tegra114.c +36 -7
index d98c502a9c47..e37712bed0b2 100644
@@ -307,10 +307,16 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tegra_spi_writel(tspi, x, SPI_TX_FIFO);
 		}
+
+		tspi->cur_tx_pos += written_words * tspi->bytes_per_word;
 	} else {
+		unsigned int write_bytes;
 		max_n_32bit = min(tspi->curr_dma_words,  tx_empty_count);
 		written_words = max_n_32bit;
 		nbytes = written_words * tspi->bytes_per_word;
+		if (nbytes > t->len - tspi->cur_pos)
+			nbytes = t->len - tspi->cur_pos;
+		write_bytes = nbytes;
 		for (count = 0; count < max_n_32bit; count++) {
 			u32 x = 0;
 
@@ -319,8 +325,10 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tegra_spi_writel(tspi, x, SPI_TX_FIFO);
 		}
+
+		tspi->cur_tx_pos += write_bytes;
 	}
-	tspi->cur_tx_pos += written_words * tspi->bytes_per_word;
+
 	return written_words;
 }
 
@@ -344,20 +352,27 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf(
 			for (i = 0; len && (i < 4); i++, len--)
 				*rx_buf++ = (x >> i*8) & 0xFF;
 		}
-		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 		read_words += tspi->curr_dma_words;
+		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
+		u8 bytes_per_word = tspi->bytes_per_word;
+		unsigned int read_bytes;
 
+		len = rx_full_count * bytes_per_word;
+		if (len > t->len - tspi->cur_pos)
+			len = t->len - tspi->cur_pos;
+		read_bytes = len;
 		for (count = 0; count < rx_full_count; count++) {
 			u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask;
 
-			for (i = 0; (i < tspi->bytes_per_word); i++)
+			for (i = 0; len && (i < bytes_per_word); i++, len--)
 				*rx_buf++ = (x >> (i*8)) & 0xFF;
 		}
-		tspi->cur_rx_pos += rx_full_count * tspi->bytes_per_word;
 		read_words += rx_full_count;
+		tspi->cur_rx_pos += read_bytes;
 	}
+
 	return read_words;
 }
 
@@ -372,12 +387,17 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
 		unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
 
 		memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len);
+		tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		unsigned int i;
 		unsigned int count;
 		u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
 		unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
+		unsigned int write_bytes;
 
+		if (consume > t->len - tspi->cur_pos)
+			consume = t->len - tspi->cur_pos;
+		write_bytes = consume;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			u32 x = 0;
 
@@ -386,8 +406,9 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tspi->tx_dma_buf[count] = x;
 		}
+
+		tspi->cur_tx_pos += write_bytes;
 	}
-	tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 
 	/* Make the dma buffer to read by dma */
 	dma_sync_single_for_device(tspi->dev, tspi->tx_dma_phys,
@@ -405,20 +426,28 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf(
 		unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
 
 		memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len);
+		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		unsigned int i;
 		unsigned int count;
 		unsigned char *rx_buf = t->rx_buf + tspi->cur_rx_pos;
 		u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
+		unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
+		unsigned int read_bytes;
 
+		if (consume > t->len - tspi->cur_pos)
+			consume = t->len - tspi->cur_pos;
+		read_bytes = consume;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			u32 x = tspi->rx_dma_buf[count] & rx_mask;
 
-			for (i = 0; (i < tspi->bytes_per_word); i++)
+			for (i = 0; consume && (i < tspi->bytes_per_word);
+							i++, consume--)
 				*rx_buf++ = (x >> (i*8)) & 0xFF;
 		}
+
+		tspi->cur_rx_pos += read_bytes;
 	}
-	tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 
 	/* Make the dma buffer to read by dma */
 	dma_sync_single_for_device(tspi->dev, tspi->rx_dma_phys,
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 109/251 dccp: Fix memleak in __feat_register_sp

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 1d3ff0950e2b40dc861b1739029649d03f591820 ]

If dccp_feat_push_change fails, we forget free the mem which is alloced by kmemdup in dccp_feat_clone_sp_val.

Fixes e8ef967a54f4 ("dccp: Registration routines for changing feature values")
---
 net/dccp/feat.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
net/dccp/feat.c +6 -1
index f227f002c73d..db87d9f58019 100644
@@ -738,7 +738,12 @@ static int __feat_register_sp(struct list_head *fn, u8 feat, u8 is_local,
 	if (dccp_feat_clone_sp_val(&fval, sp_val, sp_len))
 		return -ENOMEM;
 
-	return dccp_feat_push_change(fn, feat, is_local, mandatory, &fval);
+	if (dccp_feat_push_change(fn, feat, is_local, mandatory, &fval)) {
+		kfree(fval.sp.vec);
+		return -ENOMEM;
+	}
+
+	return 0;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#70 lore raw

PATCH 111/251 spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios

In reply to Sasha Levin

From: Martin Sperl <[email protected]>

[ Upstream commit 509c583620e9053e43d611bf1614fc3d3abafa96 ]

The original driver by default defines num_chipselects as -1. This actually allicates an array of 65535 entries in of_spi_register_master.

There is a side-effect for buggy device trees that (contrary to dt-binding documentation) have no cs-gpio defined.

This mode was never supported by the driver due to limitations of native cs and additional code complexity and is explicitly not stated to be implemented.

To keep backwards compatibility with such buggy DTs we limit the number of chip_selects to 1, as for all practical purposes it is only ever realistic to use a single chip select in native cs mode without negative side-effects.

Fixes 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
---
 drivers/spi/spi-bcm2835aux.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/spi/spi-bcm2835aux.c +12 -1
index 5c89bbb05441..e075712c501e 100644
@@ -416,7 +416,18 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, master);
 	master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->num_chipselect = -1;
+	/* even though the driver never officially supported native CS
+	 * allow a single native CS for legacy DT support purposes when
+	 * no cs-gpio is configured.
+	 * Known limitations for native cs are:
+	 * * multiple chip-selects: cs0-cs2 are all simultaniously asserted
+	 *     whenever there is a transfer -  this even includes SPI_NO_CS
+	 * * SPI_CS_HIGH: is ignores - cs are always asserted low
+	 * * cs_change: cs is deasserted after each spi_transfer
+	 * * cs_delay_usec: cs is always deasserted one SCK cycle after
+	 *     a spi_transfer
+	 */
+	master->num_chipselect = 1;
 	master->transfer_one = bcm2835aux_spi_transfer_one;
 	master->handle_err = bcm2835aux_spi_handle_err;
 	master->prepare_message = bcm2835aux_spi_prepare_message;
Signature · 1 line
2.20.1
author maintainer
#91 lore raw

PATCH 132/251 dmaengine: tegra210-adma: restore channel status

In reply to Sasha Levin

From: Sameer Pujar <[email protected]>

[ Upstream commit f33e7bb3eb922618612a90f0a828c790e8880773 ]

Status of ADMA channel registers is not saved and restored during system suspend. During active playback if system enters suspend, this results in wrong state of channel registers during system resume and playback fails to resume properly. Fix this by saving following channel registers in runtime suspend and restore during runtime resume.
* ADMA_CH_LOWER_SRC_ADDR
* ADMA_CH_LOWER_TRG_ADDR
* ADMA_CH_FIFO_CTRL
* ADMA_CH_CONFIG
* ADMA_CH_CTRL
* ADMA_CH_CMD
* ADMA_CH_TC
Runtime PM calls will be inovked during system resume path if a playback or capture needs to be resumed. Hence above changes work fine for system suspend case.

Fixes f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
---
 drivers/dma/tegra210-adma.c | 46 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)
drivers/dma/tegra210-adma.c +45 -1
index e9e46a520745..8c3cab463354 100644
@@ -98,6 +98,7 @@ struct tegra_adma_chan_regs {
 	unsigned int src_addr;
 	unsigned int trg_addr;
 	unsigned int fifo_ctrl;
+	unsigned int cmd;
 	unsigned int tc;
 };
 
@@ -127,6 +128,7 @@ struct tegra_adma_chan {
 	enum dma_transfer_direction	sreq_dir;
 	unsigned int			sreq_index;
 	bool				sreq_reserved;
+	struct tegra_adma_chan_regs	ch_regs;
 
 	/* Transfer count and position info */
 	unsigned int			tx_buf_count;
@@ -635,8 +637,30 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
 static int tegra_adma_runtime_suspend(struct device *dev)
 {
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
+	struct tegra_adma_chan_regs *ch_reg;
+	struct tegra_adma_chan *tdc;
+	int i;
 
 	tdma->global_cmd = tdma_read(tdma, ADMA_GLOBAL_CMD);
+	if (!tdma->global_cmd)
+		goto clk_disable;
+
+	for (i = 0; i < tdma->nr_channels; i++) {
+		tdc = &tdma->channels[i];
+		ch_reg = &tdc->ch_regs;
+		ch_reg->cmd = tdma_ch_read(tdc, ADMA_CH_CMD);
+		/* skip if channel is not active */
+		if (!ch_reg->cmd)
+			continue;
+		ch_reg->tc = tdma_ch_read(tdc, ADMA_CH_TC);
+		ch_reg->src_addr = tdma_ch_read(tdc, ADMA_CH_LOWER_SRC_ADDR);
+		ch_reg->trg_addr = tdma_ch_read(tdc, ADMA_CH_LOWER_TRG_ADDR);
+		ch_reg->ctrl = tdma_ch_read(tdc, ADMA_CH_CTRL);
+		ch_reg->fifo_ctrl = tdma_ch_read(tdc, ADMA_CH_FIFO_CTRL);
+		ch_reg->config = tdma_ch_read(tdc, ADMA_CH_CONFIG);
+	}
+
+clk_disable:
 	clk_disable_unprepare(tdma->ahub_clk);
 
 	return 0;
@@ -645,7 +669,9 @@ static int tegra_adma_runtime_suspend(struct device *dev)
 static int tegra_adma_runtime_resume(struct device *dev)
 {
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
-	int ret;
+	struct tegra_adma_chan_regs *ch_reg;
+	struct tegra_adma_chan *tdc;
+	int ret, i;
 
 	ret = clk_prepare_enable(tdma->ahub_clk);
 	if (ret) {
@@ -654,6 +680,24 @@ static int tegra_adma_runtime_resume(struct device *dev)
 	}
 	tdma_write(tdma, ADMA_GLOBAL_CMD, tdma->global_cmd);
 
+	if (!tdma->global_cmd)
+		return 0;
+
+	for (i = 0; i < tdma->nr_channels; i++) {
+		tdc = &tdma->channels[i];
+		ch_reg = &tdc->ch_regs;
+		/* skip if channel was not active earlier */
+		if (!ch_reg->cmd)
+			continue;
+		tdma_ch_write(tdc, ADMA_CH_TC, ch_reg->tc);
+		tdma_ch_write(tdc, ADMA_CH_LOWER_SRC_ADDR, ch_reg->src_addr);
+		tdma_ch_write(tdc, ADMA_CH_LOWER_TRG_ADDR, ch_reg->trg_addr);
+		tdma_ch_write(tdc, ADMA_CH_CTRL, ch_reg->ctrl);
+		tdma_ch_write(tdc, ADMA_CH_FIFO_CTRL, ch_reg->fifo_ctrl);
+		tdma_ch_write(tdc, ADMA_CH_CONFIG, ch_reg->config);
+		tdma_ch_write(tdc, ADMA_CH_CMD, ch_reg->cmd);
+	}
+
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#95 lore raw

PATCH 136/251 platform/x86: alienware-wmi: printing the wrong error code

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 6d1f8b3d75419a8659ac916a1e9543bb3513a882 ]

The "out_data" variable is uninitialized at the point. Originally, this used to print "status" instead and that seems like the correct thing to print.

Fixes bc2ef884320b ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status")
---
 drivers/platform/x86/alienware-wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/alienware-wmi.c +1 -1
index fe419935041c..bee2115ecf10 100644
@@ -570,7 +570,7 @@ static ssize_t show_hdmi_source(struct device *dev,
 			return scnprintf(buf, PAGE_SIZE,
 					 "input [gpu] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI source status: %d\n", out_data);
+	pr_err("alienware-wmi: unknown HDMI source status: %u\n", status);
 	return scnprintf(buf, PAGE_SIZE, "input gpu [unknown]\n");
 }
 
Signature · 1 line
2.20.1
author maintainer
#96 lore raw

PATCH 137/251 netfilter: ebtables: CONFIG_COMPAT: reject trailing data after last rule

In reply to Sasha Levin

From: Florian Westphal <[email protected]>

[ Upstream commit 680f6af5337c98d116e4f127cea7845339dba8da ]

If userspace provides a rule blob with trailing data after last target, we trigger a splat, then convert ruleset to 64bit format (with trailing data), then pass that to do_replace_finish() which then returns -EINVAL.

Erroring out right away avoids the splat plus unneeded translation and error unwind.

Fixes 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
---
 net/bridge/netfilter/ebtables.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/bridge/netfilter/ebtables.c +3 -1
index 56b7197f0373..1d850edecd72 100644
@@ -2182,7 +2182,9 @@ static int compat_copy_entries(unsigned char *data, unsigned int size_user,
 	if (ret < 0)
 		return ret;
 
-	WARN_ON(size_remaining);
+	if (size_remaining)
+		return -EINVAL;
+
 	return state->buf_kern_offset;
 }
 
Signature · 1 line
2.20.1
author maintainer
#97 lore raw

PATCH 138/251 pwm: meson: Don't disable PWM when setting duty repeatedly

In reply to Sasha Levin

From: Bichao Zheng <[email protected]>

[ Upstream commit a279345807e1e0ae79567a52cfdd9d30c9174a3c ]

There is an abnormally low about 20ms,when setting duty repeatedly. Because setting the duty will disable PWM and then enable. Delete this operation now.

Fixes 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
[ Dropped code instead of hiding it behind a comment ]
---
 drivers/pwm/pwm-meson.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/pwm/pwm-meson.c +0 -5
index f58a4867b519..a196439ee14c 100644
@@ -320,11 +320,6 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->period != channel->state.period ||
 	    state->duty_cycle != channel->state.duty_cycle ||
 	    state->polarity != channel->state.polarity) {
-		if (channel->state.enabled) {
-			meson_pwm_disable(meson, pwm->hwpwm);
-			channel->state.enabled = false;
-		}
-
 		if (state->polarity != channel->state.polarity) {
 			if (state->polarity == PWM_POLARITY_NORMAL)
 				meson->inverter_mask |= BIT(pwm->hwpwm);
Signature · 1 line
2.20.1
author maintainer
#100 lore raw

PATCH 141/251 backlight: lm3630a: Return 0 on success in update_status functions

In reply to Sasha Levin

From: Brian Masney <[email protected]>

[ Upstream commit d3f48ec0954c6aac736ab21c34a35d7554409112 ]

lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() both return the brightness value if the brightness was successfully updated. Writing to these attributes via sysfs would cause a 'Bad address' error to be returned. These functions should return 0 on success, so let's change it to correct that error.

Fixes 28e64a68a2ef ("backlight: lm3630: apply chip revision")
---
 drivers/video/backlight/lm3630a_bl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/video/backlight/lm3630a_bl.c +2 -2
index 60d6c2ac87aa..1771220b2437 100644
@@ -200,7 +200,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 				      LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access\n");
@@ -277,7 +277,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 				      LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
Signature · 1 line
2.20.1
author maintainer
#102 lore raw

PATCH 143/251 dmaengine: tegra210-adma: Fix crash during probe

In reply to Sasha Levin

From: Jon Hunter <[email protected]>

[ Upstream commit b53611fb1ce9b1786bd18205473e0c1d6bfa8934 ]

Commit f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status") added support to save and restore the DMA channel registers when runtime suspending the ADMA. This change is causing the kernel to crash when probing the ADMA, if the device is probed deferred when looking up the channel interrupts. The crash occurs because not all of the channel base addresses have been setup at this point and in the clean-up path of the probe, pm_runtime_suspend() is called invoking its callback which expects all the channel base addresses to be initialised.

Although this could be fixed by simply checking for a NULL address, on further review of the driver it seems more appropriate that we only call pm_runtime_get_sync() after all the channel interrupts and base addresses have been configured. Therefore, fix this crash by moving the calls to pm_runtime_enable(), pm_runtime_get_sync() and tegra_adma_init() after the DMA channels have been initialised.

Fixes f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status")
---
 drivers/dma/tegra210-adma.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/dma/tegra210-adma.c +13 -13
index 8c3cab463354..2d4aeba579f7 100644
@@ -744,16 +744,6 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		return PTR_ERR(tdma->ahub_clk);
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0)
-		goto rpm_disable;
-
-	ret = tegra_adma_init(tdma);
-	if (ret)
-		goto rpm_put;
-
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < tdma->nr_channels; i++) {
 		struct tegra_adma_chan *tdc = &tdma->channels[i];
@@ -771,6 +761,16 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		tdc->tdma = tdma;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto rpm_disable;
+
+	ret = tegra_adma_init(tdma);
+	if (ret)
+		goto rpm_put;
+
 	dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
@@ -812,13 +812,13 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 dma_remove:
 	dma_async_device_unregister(&tdma->dma_dev);
-irq_dispose:
-	while (--i >= 0)
-		irq_dispose_mapping(tdma->channels[i].irq);
 rpm_put:
 	pm_runtime_put_sync(&pdev->dev);
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
+irq_dispose:
+	while (--i >= 0)
+		irq_dispose_mapping(tdma->channels[i].irq);
 
 	return ret;
 }
Signature · 1 line
2.20.1
author maintainer
#103 lore raw

PATCH 144/251 spi: spi-fsl-spi: call spi_finalize_current_message() at the end

In reply to Sasha Levin

From: Christophe Leroy <[email protected]>

[ Upstream commit 44a042182cb1e9f7916e015c836967bf638b33c4 ]

spi_finalize_current_message() shall be called once all actions are finished, otherwise the last actions might step over a newly started transfer.

Fixes c592becbe704 ("spi: fsl-(e)spi: migrate to generic master queueing")
---
 drivers/spi/spi-fsl-spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-fsl-spi.c +1 -1
index 8b290d9d7935..5419de19859a 100644
@@ -408,7 +408,6 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
 	}
 
 	m->status = status;
-	spi_finalize_current_message(master);
 
 	if (status || !cs_change) {
 		ndelay(nsecs);
@@ -416,6 +415,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
 	}
 
 	fsl_spi_setup_transfer(spi, NULL);
+	spi_finalize_current_message(master);
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#189 lore raw

PATCH 229/251 spi: atmel: fix handling of cs_change set on non-last xfer

In reply to Sasha Levin

From: Mans Rullgard <[email protected]>

[ Upstream commit fed8d8c7a6dc2a76d7764842853d81c770b0788e ]

The driver does the wrong thing when cs_change is set on a non-last xfer in a message. When cs_change is set, the driver deactivates the CS and leaves it off until a later xfer again has cs_change set whereas it should be briefly toggling CS off and on again.

This patch brings the behaviour of the driver back in line with the documentation and common sense. The delay of 10 us is the same as is used by the default spi_transfer_one_message() function in spi.c.

[gregory: rebased on for-5.5 from spi tree]
Fixes 8090d6d1a415 ("spi: atmel: Refactor spi-atmel to use SPI framework queue")
---
 drivers/spi/spi-atmel.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/spi/spi-atmel.c +3 -7
index 691c04b3e5b6..938840af9c50 100644
@@ -315,7 +315,6 @@ struct atmel_spi {
 	struct atmel_spi_dma	dma;
 
 	bool			keep_cs;
-	bool			cs_active;
 
 	u32			fifo_size;
 };
@@ -1404,11 +1403,9 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 				 &msg->transfers)) {
 			as->keep_cs = true;
 		} else {
-			as->cs_active = !as->cs_active;
-			if (as->cs_active)
-				cs_activate(as, msg->spi);
-			else
-				cs_deactivate(as, msg->spi);
+			cs_deactivate(as, msg->spi);
+			udelay(10);
+			cs_activate(as, msg->spi);
 		}
 	}
 
@@ -1431,7 +1428,6 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,
 	atmel_spi_lock(as);
 	cs_activate(as, spi);
 
-	as->cs_active = true;
 	as->keep_cs = false;
 
 	msg->status = 0;
Signature · 1 line
2.20.1
author maintainer
#205 lore raw

PATCH 245/251 scsi: target: core: Fix a pr_debug() argument

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit c941e0d172605731de9b4628bd4146d35cf2e7d6 ]

Print the string for which conversion failed instead of printing the function name twice.

Fixes 2650d71e244f ("target: move transport ID handling to the core")
Cc Christoph Hellwig <[email protected]>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/target/target_core_fabric_lib.c +1 -1
index cb6497ce4b61..6e75095af681 100644
@@ -130,7 +130,7 @@ static int srp_get_pr_transport_id(
 	memset(buf + 8, 0, leading_zero_bytes);
 	rc = hex2bin(buf + 8 + leading_zero_bytes, p, count);
 	if (rc < 0) {
-		pr_debug("hex2bin failed for %s: %d\n", __func__, rc);
+		pr_debug("hex2bin failed for %s: %d\n", p, rc);
 		return rc;
 	}
 
Signature · 1 line
2.20.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 41/251 media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

From: Pawe? Chmiel <[email protected]>

[ Upstream commit 19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ]

This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test.
Previously it was complaining that step was bigger than difference between max and min.

Fixes 15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support")
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/s5p-jpeg/jpeg-core.c +1 -1
index c89922fb42ce..a63f4eec366e 100644
@@ -1963,7 +1963,7 @@ static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx)
 
 		v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops,
 				  V4L2_CID_JPEG_RESTART_INTERVAL,
-				  0, 3, 0xffff, 0);
+				  0, 0xffff, 1, 0);
 		if (ctx->jpeg->variant->version == SJPEG_S5P)
 			mask = ~0x06; /* 422, 420 */
 	}
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 42/251 crypto: tgr192 - fix unaligned memory access

From: Eric Biggers <[email protected]>

[ Upstream commit f990f7fb58ac8ac9a43316f09a48cff1a49dda42 ]

Fix an unaligned memory access in tgr192_transform() by using the unaligned access helpers.

Fixes 06ace7a9bafe ("[CRYPTO] Use standard byte order macros wherever possible")
---
 crypto/tgr192.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
crypto/tgr192.c +3 -3
index 321bc6ff2a9d..904c8444aa0a 100644
@@ -25,8 +25,9 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <asm/byteorder.h>
 #include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
 
 #define TGR192_DIGEST_SIZE 24
 #define TGR160_DIGEST_SIZE 20
@@ -468,10 +469,9 @@ static void tgr192_transform(struct tgr192_ctx *tctx, const u8 * data)
 	u64 a, b, c, aa, bb, cc;
 	u64 x[8];
 	int i;
-	const __le64 *ptr = (const __le64 *)data;
 
 	for (i = 0; i < 8; i++)
-		x[i] = le64_to_cpu(ptr[i]);
+		x[i] = get_unaligned_le64(data + i * sizeof(__le64));
 
 	/* save */
 	a = aa = tctx->a;
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 43/251 ASoC: imx-sgtl5000: put of nodes if finding codec fails

In reply to Sasha Levin

From: Stefan Agner <[email protected]>

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec fails.

Fixes 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
---
 sound/soc/fsl/imx-sgtl5000.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/fsl/imx-sgtl5000.c +2 -1
index 8e525f7ac08d..3d99a8579c99 100644
@@ -119,7 +119,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 45/251 rtc: cmos: ignore bogus century byte

In reply to Sasha Levin

From: Eric Wong <[email protected]>

[ Upstream commit 2a4daadd4d3e507138f8937926e6a4df49c6bfdc ]

Older versions of Libreboot and Coreboot had an invalid value (`3' in my case) in the century byte affecting the GM45 in the Thinkpad X200. Not everybody's updated their firmwares, and Linux <= 4.2 was able to read the RTC without problems, so workaround this by ignoring invalid values.

Fixes 3c217e51d8a272b9 ("rtc: cmos: century support")
Cc Alexandre Belloni <[email protected]>
Cc Alessandro Zummo <[email protected]>
Cc Sylvain Chouleur <[email protected]>
Cc Patrick McDermott <[email protected]>
---
 drivers/rtc/rtc-mc146818-lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-mc146818-lib.c +1 -1
index 2f1772a358ca..18a6f15e313d 100644
@@ -82,7 +82,7 @@ unsigned int mc146818_get_time(struct rtc_time *time)
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century)
+	if (century > 20)
 		time->tm_year += (century - 19) * 100;
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 48/251 tty: ipwireless: Fix potential NULL pointer dereference

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 7dd50e205b3348dc7784efbdf85723551de64a25 ]

There is a potential NULL pointer dereference in case alloc_ctrl_packet() fails and returns NULL.

Fixes 099dc4fb6265 ("ipwireless: driver for PC Card 3G/UMTS modem")
---
 drivers/tty/ipwireless/hardware.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/tty/ipwireless/hardware.c +2 -0
index df0204b6148f..4417f7568422 100644
@@ -1515,6 +1515,8 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw)
 			sizeof(struct ipw_setup_get_version_query_packet),
 			ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
 			TL_SETUP_SIGNO_GET_VERSION_QRY);
+	if (!ver_packet)
+		return;
 	ver_packet->header.length = sizeof(struct tl_setup_get_version_qry);
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 50/251 ARM: dts: lpc32xx: add required clocks property to keypad device node

In reply to Sasha Levin

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit 3e88bc38b9f6fe4b69cecf81badd3c19fde97f97 ]

NXP LPC32xx keypad controller requires a clock property to be defined.

The change fixes the driver initialization problem:

lpc32xx_keys 40050000.key: failed to get clock
lpc32xx_keys: probe of 40050000.key failed with error -2

Fixes 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
---
 arch/arm/boot/dts/lpc32xx.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/lpc32xx.dtsi +1 -0
index 5fa3111731cb..da375813afd0 100644
@@ -462,6 +462,7 @@
 			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_KEY>;
 				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 53/251 ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property

In reply to Sasha Levin

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit 30fc01bae3cda747e7d9c352b1aa51ca113c8a9d ]

The originally added ARM PrimeCell PL111 clocks property misses the required "clcdclk" clock, which is the same as a clock to enable the LCD controller on NXP LPC3230 and NXP LPC3250 SoCs.

Fixes 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
---
 arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/lpc32xx.dtsi +2 -2
index 3adbbaff7971..2802c9565b6c 100644
@@ -142,8 +142,8 @@
 			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_LCD>;
-			clock-names = "apb_pclk";
+			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
 			status = "disabled";
 		};
 
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 54/251 ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage

In reply to Sasha Levin

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]

The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which supplies SD/MMC card's power, has a constant output voltage level of either 3.15V or 3.3V, the actual value depends on JP4 position, the power rail is referenced as VCC_SDIO in the board hardware manual.

Fixes d06670e96267 ("arm: dts: phy3250: add SD fixed regulator")
---
 arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/lpc3250-phy3250.dts +2 -2
index b7bd3a110a8d..dd0bdf765599 100644
@@ -49,8 +49,8 @@
 		sd_reg: regulator@2 {
 			compatible = "regulator-fixed";
 			regulator-name = "sd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio 5 5 0>;
 			enable-active-high;
 		};
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 58/251 thermal: mediatek: fix register index error

In reply to Sasha Levin

From: Michael Kao <[email protected]>

[ Upstream commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 ]

The index of msr and adcpnp should match the sensor which belongs to the selected bank in the for loop.

Fixes b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
---
 drivers/thermal/mtk_thermal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/thermal/mtk_thermal.c +4 -2
index 34169c32d495..ea9558679634 100644
@@ -348,7 +348,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	u32 raw;
 
 	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-		raw = readl(mt->thermal_base + conf->msr[i]);
+		raw = readl(mt->thermal_base +
+			    conf->msr[conf->bank_data[bank->id].sensors[i]]);
 
 		temp = raw_to_mcelsius(mt,
 				       conf->bank_data[bank->id].sensors[i],
@@ -485,7 +486,8 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
 	for (i = 0; i < conf->bank_data[num].num_sensors; i++)
 		writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-		       mt->thermal_base + conf->adcpnp[i]);
+		       mt->thermal_base +
+		       conf->adcpnp[conf->bank_data[num].sensors[i]]);
 
 	writel((1 << conf->bank_data[num].num_sensors) - 1,
 	       mt->thermal_base + TEMP_MONCTL0);
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 57/251 rtc: ds1672: fix unintended sign extension

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit f0c04c276739ed8acbb41b4868e942a55b128dca ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#138801 ("Unintended sign extension")

Fixes edf1aaa31fc5 ("[PATCH] RTC subsystem: DS1672 driver")
---
 drivers/rtc/rtc-ds1672.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/rtc/rtc-ds1672.c +2 -1
index 5c18ac7394c4..c911f2db0af5 100644
@@ -58,7 +58,8 @@ static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 		"%s: raw read data - counters=%02x,%02x,%02x,%02x\n",
 		__func__, buf[0], buf[1], buf[2], buf[3]);
 
-	time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	time = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+	       (buf[1] << 8) | buf[0];
 
 	rtc_time_to_tm(time, tm);
 
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 60/251 rtc: 88pm860x: fix unintended sign extension

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit dc9e47160626cdb58d5c39a4f43dcfdb27a5c004 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes 008b30408c40 ("mfd: Add rtc support to 88pm860x")
---
 drivers/rtc/rtc-88pm860x.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/rtc/rtc-88pm860x.c +14 -7
index 166faae3a59c..7d3e5168fcef 100644
@@ -115,11 +115,13 @@ static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -145,7 +147,8 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	base = ticks - data;
 	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -170,10 +173,12 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -198,11 +203,13 @@ static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 59/251 net: phy: fixed_phy: Fix fixed_phy not checking GPIO

In reply to Sasha Levin

From: Moritz Fischer <[email protected]>

[ Upstream commit 8f289805616e81f7c1690931aa8a586c76f4fa88 ]

Fix fixed_phy not checking GPIO if no link_update callback is registered.

In the original version all users registered a link_update callback so the issue was masked.

Fixes a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.")
---
 drivers/net/phy/fixed_phy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/phy/fixed_phy.c +3 -3
index eb5167210681..3ab2eb677a59 100644
@@ -67,11 +67,11 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
 			do {
 				s = read_seqcount_begin(&fp->seqcount);
 				/* Issue callback if user registered it. */
-				if (fp->link_update) {
+				if (fp->link_update)
 					fp->link_update(fp->phydev->attached_dev,
 							&fp->status);
-					fixed_phy_update(fp);
-				}
+				/* Check the GPIO for change in status */
+				fixed_phy_update(fp);
 				state = fp->status;
 			} while (read_seqcount_retry(&fp->seqcount, s));
 
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 61/251 rtc: 88pm80x: fix unintended sign extension

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit fb0b322537a831b5b0cb948c56f8f958ce493d3a ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension")

Fixes 2985c29c1964 ("rtc: Add rtc support to 88PM80X PMIC")
---
 drivers/rtc/rtc-88pm80x.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/rtc/rtc-88pm80x.c +14 -7
index 466bf7f9a285..7da2a1fb50f8 100644
@@ -116,12 +116,14 @@ static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	unsigned char buf[4];
 	unsigned long ticks, base, data;
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
-	base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
 
 	/* load 32-bit read-only counter */
 	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -144,7 +146,8 @@ static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* load 32-bit read-only counter */
 	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	base = ticks - data;
 	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -165,11 +168,13 @@ static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	int ret;
 
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
-	base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
 
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -192,12 +197,14 @@ static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0);
 
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
-	base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
 
 	/* load 32-bit read-only counter */
 	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 62/251 rtc: pm8xxx: fix unintended sign extension

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit e42280886018c6f77f0a90190f7cba344b0df3e0 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#1309693 ("Unintended sign extension")

Fixes 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
---
 drivers/rtc/rtc-pm8xxx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/rtc/rtc-pm8xxx.c +4 -2
index fac835530671..a1b4b0ed1f19 100644
@@ -186,7 +186,8 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		}
 	}
 
-	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+	       ((unsigned long)value[3] << 24);
 
 	rtc_time_to_tm(secs, tm);
 
@@ -267,7 +268,8 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 		return rc;
 	}
 
-	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+	       ((unsigned long)value[3] << 24);
 
 	rtc_time_to_tm(secs, &alarm->time);
 
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 65/251 iw_cxgb4: use tos when finding ipv6 routes

In reply to Sasha Levin

From: Steve Wise <[email protected]>

[ Upstream commit c8a7eb554a83214c3d8ee5cb322da8c72810d2dc ]

When IPv6 support was added, the correct tos was not passed to cxgb_find_route6(). This potentially results in the wrong route entry.

Fixes 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
---
 drivers/infiniband/hw/cxgb4/cm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/infiniband/hw/cxgb4/cm.c +3 -2
index a29fe11d688a..a04a53acb24f 100644
@@ -2135,7 +2135,8 @@ static int c4iw_reconnect(struct c4iw_ep *ep)
 					   laddr6->sin6_addr.s6_addr,
 					   raddr6->sin6_addr.s6_addr,
 					   laddr6->sin6_port,
-					   raddr6->sin6_port, 0,
+					   raddr6->sin6_port,
+					   ep->com.cm_id->tos,
 					   raddr6->sin6_scope_id);
 		iptype = 6;
 		ra = (__u8 *)&raddr6->sin6_addr;
@@ -3278,7 +3279,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 					   laddr6->sin6_addr.s6_addr,
 					   raddr6->sin6_addr.s6_addr,
 					   laddr6->sin6_port,
-					   raddr6->sin6_port, 0,
+					   raddr6->sin6_port, cm_id->tos,
 					   raddr6->sin6_scope_id);
 	}
 	if (!ep->dst) {
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 68/251 pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group

In reply to Sasha Levin

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit b9fd50488b4939ce5b3a026d29e752e17c2d1800 ]

The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected.

Fixes 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7792.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/sh-pfc/pfc-r8a7792.c +1 -0
index 21badb6166b9..97998929db93 100644
@@ -1863,6 +1863,7 @@ static const char * const vin1_groups[] = {
 	"vin1_data8",
 	"vin1_data24_b",
 	"vin1_data20_b",
+	"vin1_data18_b",
 	"vin1_data16_b",
 	"vin1_sync",
 	"vin1_field",
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 74/251 dmaengine: mv_xor: Use correct device for DMA API

In reply to Sasha Levin

From: Robin Murphy <[email protected]>

[ Upstream commit 3e5daee5ecf314da33a890fabaa2404244cd2a36 ]

Using dma_dev->dev for mappings before it's assigned with the correct device is unlikely to work as expected, and with future dma-direct changes, passing a NULL device may end up crashing entirely. I don't know enough about this hardware or the mv_xor_prep_dma_interrupt() operation to implement the appropriate error-handling logic that would have revealed those dma_map_single() calls failing on arm64 for as long as the driver has been enabled there, but moving the assignment earlier will at least make the current code operate as intended.

---
 drivers/dma/mv_xor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/mv_xor.c +1 -1
index 23f75285a4d9..5d524f29c5f1 100644
@@ -1044,6 +1044,7 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 		mv_chan->op_in_desc = XOR_MODE_IN_DESC;
 
 	dma_dev = &mv_chan->dmadev;
+	dma_dev->dev = &pdev->dev;
 	mv_chan->xordev = xordev;
 
 	/*
@@ -1076,7 +1077,6 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 	dma_dev->device_free_chan_resources = mv_xor_free_chan_resources;
 	dma_dev->device_tx_status = mv_xor_status;
 	dma_dev->device_issue_pending = mv_xor_issue_pending;
-	dma_dev->dev = &pdev->dev;
 
 	/* set prep routines based on capability */
 	if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 75/251 cdc-wdm: pass return value of recover_from_urb_loss

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 0742a338f5b3446a26de551ad8273fb41b2787f2 ]

'rv' is the correct return value, pass it upstream instead of 0

Fixes 17d80d562fd7 ("USB: autosuspend for cdc-wdm")
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/class/cdc-wdm.c +1 -1
index 217a479165e0..09337a973335 100644
@@ -1098,7 +1098,7 @@ static int wdm_post_reset(struct usb_interface *intf)
 	rv = recover_from_urb_loss(desc);
 	mutex_unlock(&desc->wlock);
 	mutex_unlock(&desc->rlock);
-	return 0;
+	return rv;
 }
 
 static struct usb_driver wdm_driver = {
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 84/251 NFS: Fix a soft lockup in the delegation recovery code

In reply to Sasha Levin

From: Trond Myklebust <[email protected]>

[ Upstream commit 6f9449be53f3ce383caed797708b332ede8d952c ]

Fix a soft lockup when NFS client delegation recovery is attempted but the inode is in the process of being freed. When the igrab(inode) call fails, and we have to restart the recovery process, we need to ensure that we won't attempt to recover the same delegation again.

Fixes 45870d6909d5a ("NFSv4.1: Test delegation stateids when server...")
---
 fs/nfs/delegation.c | 20 ++++++++++++--------
 fs/nfs/delegation.h |  1 +
 2 files changed, 13 insertions(+), 8 deletions(-)
fs/nfs/delegation.c +12 -8
index 9a8830a0f31f..014039618cff 100644
@@ -234,6 +234,8 @@ static struct inode *nfs_delegation_grab_inode(struct nfs_delegation *delegation
 	spin_lock(&delegation->lock);
 	if (delegation->inode != NULL)
 		inode = igrab(delegation->inode);
+	if (!inode)
+		set_bit(NFS_DELEGATION_INODE_FREEING, &delegation->flags);
 	spin_unlock(&delegation->lock);
 	return inode;
 }
@@ -867,10 +869,11 @@ void nfs_delegation_reap_unclaimed(struct nfs_client *clp)
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
 		list_for_each_entry_rcu(delegation, &server->delegations,
 								super_list) {
-			if (test_bit(NFS_DELEGATION_RETURNING,
-						&delegation->flags))
-				continue;
-			if (test_bit(NFS_DELEGATION_NEED_RECLAIM,
+			if (test_bit(NFS_DELEGATION_INODE_FREEING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_RETURNING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_NEED_RECLAIM,
 						&delegation->flags) == 0)
 				continue;
 			if (!nfs_sb_active(server->super))
@@ -975,10 +978,11 @@ void nfs_reap_expired_delegations(struct nfs_client *clp)
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
 		list_for_each_entry_rcu(delegation, &server->delegations,
 								super_list) {
-			if (test_bit(NFS_DELEGATION_RETURNING,
-						&delegation->flags))
-				continue;
-			if (test_bit(NFS_DELEGATION_TEST_EXPIRED,
+			if (test_bit(NFS_DELEGATION_INODE_FREEING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_RETURNING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_TEST_EXPIRED,
 						&delegation->flags) == 0)
 				continue;
 			if (!nfs_sb_active(server->super))
fs/nfs/delegation.h +1 -0
index 2c6cb7fb7d5e..f72095bf9e10 100644
@@ -33,6 +33,7 @@ enum {
 	NFS_DELEGATION_RETURNING,
 	NFS_DELEGATION_REVOKED,
 	NFS_DELEGATION_TEST_EXPIRED,
+	NFS_DELEGATION_INODE_FREEING,
 };
 
 int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 71/251 block: don't use bio->bi_vcnt to figure out segment number

In reply to Sasha Levin

From: Ming Lei <[email protected]>

[ Upstream commit 1a67356e9a4829da2935dd338630a550c59c8489 ]

It is wrong to use bio->bi_vcnt to figure out how many segments there are in the bio even though CLONED flag isn't set on this bio, because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't cause any performance loss now because the physical segment number is figured out in blk_queue_split() and BIO_SEG_VALID is set meantime since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting").

Fixes 76d8137a3113 ("blk-merge: recaculate segment if it isn't less than max segments")
---
 block/blk-merge.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
block/blk-merge.c +1 -7
index 2642e5fc8b69..66795cca662a 100644
@@ -305,13 +305,7 @@ void blk_recalc_rq_segments(struct request *rq)
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
 {
-	unsigned short seg_cnt;
-
-	/* estimate segment number by bi_vcnt for non-cloned bio */
-	if (bio_flagged(bio, BIO_CLONED))
-		seg_cnt = bio_segments(bio);
-	else
-		seg_cnt = bio->bi_vcnt;
+	unsigned short seg_cnt = bio_segments(bio);
 
 	if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags) &&
 			(seg_cnt < queue_max_segments(q)))
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 90/251 regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uA

In reply to Sasha Levin

From: Axel Lin <[email protected]>

[ Upstream commit c25d47888f0fb3d836d68322d4aea2caf31a75a6 ]

The wm831x_dcdc_ilim entries needs to be uA because it is used to compare with min_uA and max_uA.
While at it also make the array const and change to use unsigned int.

Fixes e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support")
---
 drivers/regulator/wm831x-dcdc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/wm831x-dcdc.c +2 -2
index 5a5bc4bb08d2..df591435d12a 100644
@@ -327,8 +327,8 @@ static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
 }
 
 /* Current limit options */
-static u16 wm831x_dcdc_ilim[] = {
-	125, 250, 375, 500, 625, 750, 875, 1000
+static const unsigned int wm831x_dcdc_ilim[] = {
+	125000, 250000, 375000, 500000, 625000, 750000, 875000, 1000000
 };
 
 static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 91/251 nios2: ksyms: Add missing symbol exports

In reply to Sasha Levin

From: Guenter Roeck <[email protected]>

[ Upstream commit 0f8ed994575429d6042cf5d7ef70081c94091587 ]

Building nios2:allmodconfig fails as follows (each symbol is only listed once).

ERROR: "__ashldi3" [drivers/md/dm-writecache.ko] undefined!
ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined!
ERROR: "__lshrdi3" [drivers/md/dm-zoned.ko] undefined!
ERROR: "flush_icache_range" [drivers/misc/lkdtm/lkdtm.ko] undefined!
ERROR: "empty_zero_page" [drivers/md/dm-mod.ko] undefined!

The problem is seen with gcc 7.3.0.

Export the missing symbols.

Fixes 2fc8483fdcde ("nios2: Build infrastructure")
---
 arch/nios2/kernel/nios2_ksyms.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
arch/nios2/kernel/nios2_ksyms.c +12 -0
index bf2f55d10a4d..4e704046a150 100644
@@ -9,12 +9,20 @@
 #include <linux/export.h>
 #include <linux/string.h>
 
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+
 /* string functions */
 
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memmove);
 
+/* memory management */
+
+EXPORT_SYMBOL(empty_zero_page);
+EXPORT_SYMBOL(flush_icache_range);
+
 /*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
@@ -31,3 +39,7 @@ DECLARE_EXPORT(__udivsi3);
 DECLARE_EXPORT(__umoddi3);
 DECLARE_EXPORT(__umodsi3);
 DECLARE_EXPORT(__muldi3);
+DECLARE_EXPORT(__ucmpdi2);
+DECLARE_EXPORT(__lshrdi3);
+DECLARE_EXPORT(__ashldi3);
+DECLARE_EXPORT(__ashrdi3);
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 77/251 regulator: pv88080: Fix array out-of-bounds access

In reply to Sasha Levin

From: Axel Lin <[email protected]>

[ Upstream commit 3c413f594c4f9df40061445667ca11a12bc8ee34 ]

Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1.

Fixes 99cf3af5e2d5 ("regulator: pv88080: new regulator driver")
---
 drivers/regulator/pv88080-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/pv88080-regulator.c +1 -1
index 954a20eeb26f..a40ecfb77210 100644
@@ -279,7 +279,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
 	int i;
 
 	/* search for closest to maximum */
-	for (i = info->n_current_limits; i >= 0; i--) {
+	for (i = info->n_current_limits - 1; i >= 0; i--) {
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 				return regmap_update_bits(rdev->regmap,
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 78/251 regulator: pv88090: Fix array out-of-bounds access

In reply to Sasha Levin

From: Axel Lin <[email protected]>

[ Upstream commit a5455c9159414748bed4678184bf69989a4f7ba3 ]

Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1.

Fixes c90456e36d9c ("regulator: pv88090: new regulator driver")
---
 drivers/regulator/pv88090-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/pv88090-regulator.c +1 -1
index 421641175352..789652c9b014 100644
@@ -157,7 +157,7 @@ static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
 	int i;
 
 	/* search for closest to maximum */
-	for (i = info->n_current_limits; i >= 0; i--) {
+	for (i = info->n_current_limits - 1; i >= 0; i--) {
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 			return regmap_update_bits(rdev->regmap,
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 95/251 net: sh_eth: fix a missing check of of_get_phy_mode

In reply to Sasha Levin

From: Kangjie Lu <[email protected]>

[ Upstream commit 035a14e71f27eefa50087963b94cbdb3580d08bf ]

of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails.

---
 drivers/net/ethernet/renesas/sh_eth.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/renesas/sh_eth.c +5 -1
index 49300194d3f9..6f8d4810ce97 100644
@@ -2929,12 +2929,16 @@ static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
 	struct device_node *np = dev->of_node;
 	struct sh_eth_plat_data *pdata;
 	const char *mac_addr;
+	int ret;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
 
-	pdata->phy_interface = of_get_phy_mode(np);
+	ret = of_get_phy_mode(np);
+	if (ret < 0)
+		return NULL;
+	pdata->phy_interface = ret;
 
 	mac_addr = of_get_mac_address(np);
 	if (mac_addr)
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 96/251 media: ivtv: update *pos correctly in ivtv_read_pos()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit f8e579f3ca0973daef263f513da5edff520a6c0d ]

We had intended to update *pos, but the current code is a no-op.

Fixes 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
---
 drivers/media/pci/ivtv/ivtv-fileops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/ivtv/ivtv-fileops.c +1 -1
index c9bd018e53de..e2b19c3eaa87 100644
@@ -420,7 +420,7 @@ static ssize_t ivtv_read_pos(struct ivtv_stream *s, char __user *ubuf, size_t co
 
 	IVTV_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc);
 	if (rc > 0)
-		pos += rc;
+		*pos += rc;
 	return rc;
 }
 
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 97/251 media: cx18: update *pos correctly in cx18_read_pos()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 7afb0df554292dca7568446f619965fb8153085d ]

We should be updating *pos. The current code is a no-op.

Fixes 1c1e45d17b66 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
---
 drivers/media/pci/cx18/cx18-fileops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/cx18/cx18-fileops.c +1 -1
index df837408efd5..0171dc5b8809 100644
@@ -490,7 +490,7 @@ static ssize_t cx18_read_pos(struct cx18_stream *s, char __user *ubuf,
 
 	CX18_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc);
 	if (rc > 0)
-		pos += rc;
+		*pos += rc;
 	return rc;
 }
 
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 83/251 fs/nfs: Fix nfs_parse_devname to not modify it's argument

In reply to Sasha Levin

From: "Eric W. Biederman" <[email protected]>

[ Upstream commit 40cc394be1aa18848b8757e03bd8ed23281f572e ]

In the rare and unsupported case of a hostname list nfs_parse_devname will modify dev_name. There is no need to modify dev_name as the all that is being computed is the length of the hostname, so the computed length can just be shorted.

Fixes dc04589827f7 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3")
---
 fs/nfs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/nfs/super.c +1 -1
index 42c31587a936..4c21e572f2d9 100644
@@ -1928,7 +1928,7 @@ static int nfs_parse_devname(const char *dev_name,
 		/* kill possible hostname list: not supported */
 		comma = strchr(dev_name, ',');
 		if (comma != NULL && comma < end)
-			*comma = 0;
+			len = comma - dev_name;
 	}
 
 	if (len > maxnamlen)
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 105/251 media: davinci-isif: avoid uninitialized variable use

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 0e633f97162c1c74c68e2eb20bbd9259dce87cd9 ]

clang warns about a possible variable use that gcc never complained about:

drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here

      [-Werror,-Wuninitialized]
                dm365_vpss_set_pg_frame_size(frame_size);
                                             ^~~~~~~~~~
drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here
        struct vpss_pg_frame_size frame_size;
        ^

1 error generated.

There is no initialization for this variable at all, and there has never been one in the mainline kernel, so we really should not put that stack data into an mmio register.

On the other hand, I suspect that gcc checks the condition more closely and notices that the global isif_cfg.bayer.config_params.test_pat_gen flag is initialized to zero and never written to from any code path, so anything depending on it can be eliminated.

To shut up the clang warning, just remove the dead code manually, it has probably never been used because any attempt to do so would have resulted in undefined behavior.

Fixes 63e3ab142fa3 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365")
---
 drivers/media/platform/davinci/isif.c | 9 ---------
 1 file changed, 9 deletions(-)
drivers/media/platform/davinci/isif.c +0 -9
index 78e37cf3470f..b51b875c5a61 100644
@@ -890,9 +890,7 @@ static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
 static int isif_config_ycbcr(void)
 {
 	struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
-	struct vpss_pg_frame_size frame_size;
 	u32 modeset = 0, ccdcfg = 0;
-	struct vpss_sync_pol sync;
 
 	dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
 
@@ -980,13 +978,6 @@ static int isif_config_ycbcr(void)
 		/* two fields are interleaved in memory */
 		regw(0x00000249, SDOFST);
 
-	/* Setup test pattern if enabled */
-	if (isif_cfg.bayer.config_params.test_pat_gen) {
-		sync.ccdpg_hdpol = params->hd_pol;
-		sync.ccdpg_vdpol = params->vd_pol;
-		dm365_vpss_set_sync_pol(sync);
-		dm365_vpss_set_pg_frame_size(frame_size);
-	}
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 94/251 xen, cpu_hotplug: Prevent an out of bounds access

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 201676095dda7e5b31a5e1d116d10fc22985075e ]

The "cpu" variable comes from the sscanf() so Smatch marks it as untrusted data. We can't pass a higher value than "nr_cpu_ids" to cpu_possible() or it results in an out of bounds access.

Fixes d68d82afd4c8 ("xen: implement CPU hotplugging")
---
 drivers/xen/cpu_hotplug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/xen/cpu_hotplug.c +1 -1
index f4e59c445964..17054d695411 100644
@@ -53,7 +53,7 @@ static int vcpu_online(unsigned int cpu)
 }
 static void vcpu_hotplug(unsigned int cpu)
 {
-	if (!cpu_possible(cpu))
+	if (cpu >= nr_cpu_ids || !cpu_possible(cpu))
 		return;
 
 	switch (vcpu_online(cpu)) {
Signature · 7 lines
2.20.1


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
author maintainer
#69 lore raw

PATCH 110/251 soc/fsl/qe: Fix an error code in qe_pin_request()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
---
 drivers/soc/fsl/qe/gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/soc/fsl/qe/gpio.c +3 -1
index 0aaf429f31d5..b5a7107a9c0a 100644
@@ -152,8 +152,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	if (err < 0)
 		goto err0;
 	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
+	if (WARN_ON(!gc)) {
+		err = -ENODEV;
 		goto err0;
+	}
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 113/251 scsi: qla2xxx: Unregister chrdev if module initialization fails

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit c794d24ec9eb6658909955772e70f34bef5b5b91 ]

If module initialization fails after the character device has been registered, unregister the character device. Additionally, avoid duplicating error path code.

Cc Himanshu Madhani <[email protected]>
Cc Giridhar Malavali <[email protected]>
Fixes 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35.
---
 drivers/scsi/qla2xxx/qla_os.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +21 -13
index 3bae56b202f8..e730aabc26d0 100644
@@ -6055,8 +6055,7 @@ qla2x00_module_init(void)
 	/* Initialize target kmem_cache and mem_pools */
 	ret = qlt_init();
 	if (ret < 0) {
-		kmem_cache_destroy(srb_cachep);
-		return ret;
+		goto destroy_cache;
 	} else if (ret > 0) {
 		/*
 		 * If initiator mode is explictly disabled by qlt_init(),
@@ -6075,11 +6074,10 @@ qla2x00_module_init(void)
 	qla2xxx_transport_template =
 	    fc_attach_transport(&qla2xxx_transport_functions);
 	if (!qla2xxx_transport_template) {
-		kmem_cache_destroy(srb_cachep);
 		ql_log(ql_log_fatal, NULL, 0x0002,
 		    "fc_attach_transport failed...Failing load!.\n");
-		qlt_exit();
-		return -ENODEV;
+		ret = -ENODEV;
+		goto qlt_exit;
 	}
 
 	apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops);
@@ -6091,27 +6089,37 @@ qla2x00_module_init(void)
 	qla2xxx_transport_vport_template =
 	    fc_attach_transport(&qla2xxx_transport_vport_functions);
 	if (!qla2xxx_transport_vport_template) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
 		ql_log(ql_log_fatal, NULL, 0x0004,
 		    "fc_attach_transport vport failed...Failing load!.\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto unreg_chrdev;
 	}
 	ql_log(ql_log_info, NULL, 0x0005,
 	    "QLogic Fibre Channel HBA Driver: %s.\n",
 	    qla2x00_version_str);
 	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
-		fc_release_transport(qla2xxx_transport_vport_template);
 		ql_log(ql_log_fatal, NULL, 0x0006,
 		    "pci_register_driver failed...ret=%d Failing load!.\n",
 		    ret);
+		goto release_vport_transport;
 	}
 	return ret;
+
+release_vport_transport:
+	fc_release_transport(qla2xxx_transport_vport_template);
+
+unreg_chrdev:
+	if (apidev_major >= 0)
+		unregister_chrdev(apidev_major, QLA2XXX_APIDEV);
+	fc_release_transport(qla2xxx_transport_template);
+
+qlt_exit:
+	qlt_exit();
+
+destroy_cache:
+	kmem_cache_destroy(srb_cachep);
+	return ret;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 115/251 hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

In reply to Sasha Levin

From: Guenter Roeck <[email protected]>

[ Upstream commit e95fd518d05bfc087da6fcdea4900a57cfb083bd ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized.

Fixes b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers")
---
 drivers/hwmon/w83627hf.c | 42 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 37 insertions(+), 5 deletions(-)
drivers/hwmon/w83627hf.c +37 -5
index 721295b9a051..43c0f89cefdf 100644
@@ -130,17 +130,23 @@ superio_select(struct w83627hf_sio_data *sio, int ld)
 	outb(ld,  sio->sioaddr + 1);
 }
 
-static inline void
+static inline int
 superio_enter(struct w83627hf_sio_data *sio)
 {
+	if (!request_muxed_region(sio->sioaddr, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x87, sio->sioaddr);
 	outb(0x87, sio->sioaddr);
+
+	return 0;
 }
 
 static inline void
 superio_exit(struct w83627hf_sio_data *sio)
 {
 	outb(0xAA, sio->sioaddr);
+	release_region(sio->sioaddr, 2);
 }
 
 #define W627_DEVID 0x52
@@ -1275,7 +1281,7 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 				struct w83627hf_sio_data *sio_data)
 {
-	int err = -ENODEV;
+	int err;
 	u16 val;
 
 	static __initconst char *const names[] = {
@@ -1287,7 +1293,11 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 	};
 
 	sio_data->sioaddr = sioaddr;
-	superio_enter(sio_data);
+	err = superio_enter(sio_data);
+	if (err)
+		return err;
+
+	err = -ENODEV;
 	val = force_id ? force_id : superio_inb(sio_data, DEVID);
 	switch (val) {
 	case W627_DEVID:
@@ -1641,9 +1651,21 @@ static int w83627thf_read_gpio5(struct platform_device *pdev)
 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int res = 0xff, sel;
 
-	superio_enter(sio_data);
+	if (superio_enter(sio_data)) {
+		/*
+		 * Some other driver reserved the address space for itself.
+		 * We don't want to fail driver instantiation because of that,
+		 * so display a warning and keep going.
+		 */
+		dev_warn(&pdev->dev,
+			 "Can not read VID data: Failed to enable SuperIO access\n");
+		return res;
+	}
+
 	superio_select(sio_data, W83627HF_LD_GPIO5);
 
+	res = 0xff;
+
 	/* Make sure these GPIO pins are enabled */
 	if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
 		dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
@@ -1674,7 +1696,17 @@ static int w83687thf_read_vid(struct platform_device *pdev)
 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int res = 0xff;
 
-	superio_enter(sio_data);
+	if (superio_enter(sio_data)) {
+		/*
+		 * Some other driver reserved the address space for itself.
+		 * We don't want to fail driver instantiation because of that,
+		 * so display a warning and keep going.
+		 */
+		dev_warn(&pdev->dev,
+			 "Can not read VID data: Failed to enable SuperIO access\n");
+		return res;
+	}
+
 	superio_select(sio_data, W83627HF_LD_HWM);
 
 	/* Make sure these GPIO pins are enabled */
Signature · 1 line
2.20.1
author maintainer
#82 lore raw

PATCH 123/251 packet: in recvmsg msg_name return at least sizeof sockaddr_ll

In reply to Sasha Levin

From: Willem de Bruijn <[email protected]>

[ Upstream commit b2cf86e1563e33a14a1c69b3e508d15dc12f804c ]

Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send.

This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length.

Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes.

Change v1->v2: do not overwrite zeroed padding again. use copy_len.

Fixes 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
---
 net/packet/af_packet.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
net/packet/af_packet.c +11 -2
index 40cade140222..47a862cc7b34 100644
@@ -3404,20 +3404,29 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
+		int copy_len;
+
 		/* If the address length field is there to be filled
 		 * in, we fill it in now.
 		 */
 		if (sock->type == SOCK_PACKET) {
 			__sockaddr_check_size(sizeof(struct sockaddr_pkt));
 			msg->msg_namelen = sizeof(struct sockaddr_pkt);
+			copy_len = msg->msg_namelen;
 		} else {
 			struct sockaddr_ll *sll = &PACKET_SKB_CB(skb)->sa.ll;
 
 			msg->msg_namelen = sll->sll_halen +
 				offsetof(struct sockaddr_ll, sll_addr);
+			copy_len = msg->msg_namelen;
+			if (msg->msg_namelen < sizeof(struct sockaddr_ll)) {
+				memset(msg->msg_name +
+				       offsetof(struct sockaddr_ll, sll_addr),
+				       0, sizeof(sll->sll_addr));
+				msg->msg_namelen = sizeof(struct sockaddr_ll);
+			}
 		}
-		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa,
-		       msg->msg_namelen);
+		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa, copy_len);
 	}
 
 	if (pkt_sk(sk)->auxdata) {
Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 125/251 usb: gadget: fsl: fix link error against usb-gadget module

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 2100e3ca3676e894fa48b8f6f01d01733387fe81 ]

The dependency to ensure this driver links correctly fails since it can not be a loadable module:

drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral':
phy-fsl-usb.c:(.text+0x2224): undefined reference to `usb_gadget_vbus_disconnect'

Make the option 'tristate' so it can work correctly.

Fixes 5a8d651a2bde ("usb: gadget: move gadget API functions to udc-core")
---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/phy/Kconfig +1 -1
index 19ce615455c1..de70e70d02be 100644
@@ -19,7 +19,7 @@ config AB8500_USB
 	  in host mode, low speed.
 
 config FSL_USB2_OTG
-	bool "Freescale USB OTG Transceiver Driver"
+	tristate "Freescale USB OTG Transceiver Driver"
 	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 129/251 net: ena: fix: Free napi resources when ena_up() fails

In reply to Sasha Levin

From: Sameeh Jubran <[email protected]>

[ Upstream commit b287cdbd1cedfc9606682c6e02b58d00ff3a33ae ]

ena_up() calls ena_init_napi() but does not call ena_del_napi() in case of failure. This causes a segmentation fault upon rmmod when netif_napi_del() is called. Fix this bug by calling ena_del_napi() before returning error from ena_up().

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/amazon/ena/ena_netdev.c +1 -0
index 961f31c8356b..da21886609e3 100644
@@ -1702,6 +1702,7 @@ static int ena_up(struct ena_adapter *adapter)
 err_setup_tx:
 	ena_free_io_irq(adapter);
 err_req_irq:
+	ena_del_napi(adapter);
 
 	return rc;
 }
Signature · 1 line
2.20.1
author maintainer
#89 lore raw

PATCH 130/251 net: ena: fix incorrect test of supported hash function

In reply to Sasha Levin

From: Sameeh Jubran <[email protected]>

[ Upstream commit d3cfe7ddbc3dfbb9b201615b7fef8fd66d1b5fe8 ]

ena_com_set_hash_function() tests if a hash function is supported by the device before setting it.
The test returns the opposite result than needed. Reverse the condition to return the correct value.
Also use the BIT macro instead of inline shift.

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/amazon/ena/ena_com.c +1 -1
index bcd993140f84..2d196d521b83 100644
@@ -1967,7 +1967,7 @@ int ena_com_set_hash_function(struct ena_com_dev *ena_dev)
 	if (unlikely(ret))
 		return ret;
 
-	if (get_resp.u.flow_hash_func.supported_func & (1 << rss->hash_func)) {
+	if (!(get_resp.u.flow_hash_func.supported_func & BIT(rss->hash_func))) {
 		pr_err("Func hash %d isn't supported by device, abort\n",
 		       rss->hash_func);
 		return -EPERM;
Signature · 1 line
2.20.1
author maintainer
#86 lore raw

PATCH 127/251 iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU

In reply to Sasha Levin

From: Lu Baolu <[email protected]>

[ Upstream commit 5daab58043ee2bca861068e2595564828f3bc663 ]

The kernel parameter igfx_off is used by users to disable DMA remapping for the Intel integrated graphic device. It was designed for bare metal cases where a dedicated IOMMU is used for graphic. This doesn't apply to virtual IOMMU case where an include-all IOMMU is used. This makes the kernel parameter work with virtual IOMMU as well.

Cc Ashok Raj <[email protected]>
Cc Jacob Pan <[email protected]>
Fixes c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
---
 drivers/iommu/intel-iommu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +4 -1
index 25cc6ae87039..5c6e0a9fd2f3 100644
@@ -3345,9 +3345,12 @@ static int __init init_dmars(void)
 		iommu_identity_mapping |= IDENTMAP_ALL;
 
 #ifdef CONFIG_INTEL_IOMMU_BROKEN_GFX_WA
-	iommu_identity_mapping |= IDENTMAP_GFX;
+	dmar_map_gfx = 0;
 #endif
 
+	if (!dmar_map_gfx)
+		iommu_identity_mapping |= IDENTMAP_GFX;
+
 	check_tylersburg_isoch();
 
 	if (iommu_identity_mapping) {
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#71 lore raw

PATCH 112/251 ehea: Fix a copy-paste err in ehea_init_port_res

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit c8f191282f819ab4e9b47b22a65c6c29734cefce ]

pr->tx_bytes should be assigned to tx_bytes other than rx_bytes.

Fixes ce45b873028f ("ehea: Fixing statistics")
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ibm/ehea/ehea_main.c +1 -1
index 2dd17e01e3a7..3692adb8902d 100644
@@ -1476,7 +1476,7 @@ static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
 
 	memset(pr, 0, sizeof(struct ehea_port_res));
 
-	pr->tx_bytes = rx_bytes;
+	pr->tx_bytes = tx_bytes;
 	pr->tx_packets = tx_packets;
 	pr->rx_bytes = rx_bytes;
 	pr->rx_packets = rx_packets;
Signature · 1 line
2.20.1
author maintainer
#104 lore raw

PATCH 145/251 crypto: ccp - fix AES CFB error exposed by new test vectors

In reply to Sasha Levin

From: "Hook, Gary" <[email protected]>

[ Upstream commit c3b359d6567c0b8f413e924feb37cf025067d55a ]

Updated testmgr will exhibit this error message when loading the ccp-crypto module:

alg: skcipher: cfb-aes-ccp encryption failed with err -22 on test vector 3, cfg="in-place"

Update the CCP crypto driver to correctly treat CFB as a streaming mode cipher (instead of block mode). Update the configuration for CFB to specify the block size as a single byte;

Fixes 2b789435d7f3 ('crypto: ccp - CCP AES crypto API support')
---
 drivers/crypto/ccp/ccp-crypto-aes.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/crypto/ccp/ccp-crypto-aes.c +4 -4
index 89291c15015c..3f768699332b 100644
@@ -1,7 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * AMD Cryptographic Coprocessor (CCP) AES crypto API support
  *
- * Copyright (C) 2013,2016 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2019 Advanced Micro Devices, Inc.
  *
  * Author: Tom Lendacky <[email protected]>
  *
@@ -79,8 +80,7 @@ static int ccp_aes_crypt(struct ablkcipher_request *req, bool encrypt)
 		return -EINVAL;
 
 	if (((ctx->u.aes.mode == CCP_AES_MODE_ECB) ||
-	     (ctx->u.aes.mode == CCP_AES_MODE_CBC) ||
-	     (ctx->u.aes.mode == CCP_AES_MODE_CFB)) &&
+	     (ctx->u.aes.mode == CCP_AES_MODE_CBC)) &&
 	    (req->nbytes & (AES_BLOCK_SIZE - 1)))
 		return -EINVAL;
 
@@ -291,7 +291,7 @@ static struct ccp_aes_def aes_algs[] = {
 		.version	= CCP_VERSION(3, 0),
 		.name		= "cfb(aes)",
 		.driver_name	= "cfb-aes-ccp",
-		.blocksize	= AES_BLOCK_SIZE,
+		.blocksize	= 1,
 		.ivsize		= AES_BLOCK_SIZE,
 		.alg_defaults	= &ccp_aes_defaults,
 	},
Signature · 1 line
2.20.1
author maintainer
#76 lore raw

PATCH 117/251 powerpc: vdso: Make vdso32 installation conditional in vdso_install

In reply to Sasha Levin

From: Ben Hutchings <[email protected]>

[ Upstream commit ff6d27823f619892ab96f7461764840e0d786b15 ]

The 32-bit vDSO is not needed and not normally built for 64-bit little-endian configurations. However, the vdso_install target still builds and installs it. Add the same config condition as is normally used for the build.

Fixes e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...")
---
 arch/powerpc/Makefile | 2 ++
 1 file changed, 2 insertions(+)
arch/powerpc/Makefile +2 -0
index a60c9c6e5cc1..de29b88c0e70 100644
@@ -373,7 +373,9 @@ vdso_install:
 ifeq ($(CONFIG_PPC64),y)
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
 endif
+ifdef CONFIG_VDSO32
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@
+endif
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
Signature · 1 line
2.20.1
author maintainer
#107 lore raw

PATCH 148/251 iommu: Use right function to get group for device

In reply to Sasha Levin

From: Lu Baolu <[email protected]>

[ Upstream commit 57274ea25736496ee019a5c40479855b21888839 ]

The iommu_group_get_for_dev() will allocate a group for a device if it isn't in any group. This isn't the use case in iommu_request_dm_for_dev(). Let's use iommu_group_get() instead.

Fixes d290f1e70d85a ("iommu: Introduce iommu_request_dm_for_dev()")
---
 drivers/iommu/iommu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iommu/iommu.c +3 -3
index 87d3060f8609..8163a42be9ff 100644
@@ -1581,9 +1581,9 @@ int iommu_request_dm_for_dev(struct device *dev)
 	int ret;
 
 	/* Device must already be in a group before calling this function */
-	group = iommu_group_get_for_dev(dev);
-	if (IS_ERR(group))
-		return PTR_ERR(group);
+	group = iommu_group_get(dev);
+	if (!group)
+		return -EINVAL;
 
 	mutex_lock(&group->mutex);
 
Signature · 1 line
2.20.1
author maintainer
#109 lore raw

PATCH 150/251 inet: frags: call inet_frags_fini() after unregister_pernet_subsys()

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit ae7352d384a552d8c799c242e74a934809990a71 ]

Both IPv6 and 6lowpan are calling inet_frags_fini() too soon.

inet_frags_fini() is dismantling a kmem_cache, that might be needed later when unregister_pernet_subsys() eventually has to remove frags queues from hash tables and free them.

This fixes potential use-after-free, and is a prereq for the following patch.

Fixes d4ad4d22e7ac ("inet: frags: use kmem_cache for inet_frag_queue")
---
 net/ieee802154/6lowpan/reassembly.c | 2 +-
 net/ipv6/reassembly.c               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
net/ieee802154/6lowpan/reassembly.c +1 -1
index c01df341b5f6..5936bfafb1c4 100644
@@ -633,7 +633,7 @@ int __init lowpan_net_frag_init(void)
 
 void lowpan_net_frag_exit(void)
 {
-	inet_frags_fini(&lowpan_frags);
 	lowpan_frags_sysctl_unregister();
 	unregister_pernet_subsys(&lowpan_frags_ops);
+	inet_frags_fini(&lowpan_frags);
 }
net/ipv6/reassembly.c +1 -1
index 4aed9c45a91a..3f488555999e 100644
@@ -592,8 +592,8 @@ int __init ipv6_frag_init(void)
 
 void ipv6_frag_exit(void)
 {
-	inet_frags_fini(&ip6_frags);
 	ip6_frags_sysctl_unregister();
 	unregister_pernet_subsys(&ip6_frags_ops);
 	inet6_del_protocol(&frag_protocol, IPPROTO_FRAGMENT);
+	inet_frags_fini(&ip6_frags);
 }
Signature · 1 line
2.20.1
author maintainer
#79 lore raw

PATCH 120/251 6lowpan: Off by one handling ->nexthdr

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit f57c4bbf34439531adccd7d3a4ecc14f409c1399 ]

NEXTHDR_MAX is 255. What happens here is that we take a u8 value "hdr->nexthdr" from the network and then look it up in lowpan_nexthdr_nhcs[]. The problem is that if hdr->nexthdr is 0xff then we read one element beyond the end of the array so the array needs to be one element larger.

Fixes 92aa7c65d295 ("6lowpan: add generic nhc layer interface")
---
 net/6lowpan/nhc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/6lowpan/nhc.c +1 -1
index 7008d53e455c..e61679bf0908 100644
@@ -18,7 +18,7 @@
 #include "nhc.h"
 
 static struct rb_root rb_root = RB_ROOT;
-static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX];
+static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX + 1];
 static DEFINE_SPINLOCK(lowpan_nhc_lock);
 
 static int lowpan_nhc_insert(struct lowpan_nhc *nhc)
Signature · 1 line
2.20.1
author maintainer
#111 lore raw

PATCH 152/251 powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild

In reply to Sasha Levin

From: Nathan Lynch <[email protected]>

[ Upstream commit d4aa219a074a5abaf95a756b9f0d190b5c03a945 ]

Allow external callers to force the cacheinfo code to release all its references to cache nodes, e.g. before processing device tree updates post-migration, and to rebuild the hierarchy afterward.

CPU online/offline must be blocked by callers; enforce this.

Fixes 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
---
 arch/powerpc/kernel/cacheinfo.c | 21 +++++++++++++++++++++
 arch/powerpc/kernel/cacheinfo.h |  4 ++++
 2 files changed, 25 insertions(+)
arch/powerpc/kernel/cacheinfo.c +21 -0
index c641983bbdd6..0122d5ce0637 100644
@@ -867,4 +867,25 @@ void cacheinfo_cpu_offline(unsigned int cpu_id)
 	if (cache)
 		cache_cpu_clear(cache, cpu_id);
 }
+
+void cacheinfo_teardown(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_offline(cpu);
+}
+
+void cacheinfo_rebuild(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_online(cpu);
+}
+
 #endif /* (CONFIG_PPC_PSERIES && CONFIG_SUSPEND) || CONFIG_HOTPLUG_CPU */
arch/powerpc/kernel/cacheinfo.h +4 -0
index a7b74d36acd7..2cdee87a482c 100644
@@ -5,4 +5,8 @@
 extern void cacheinfo_cpu_online(unsigned int cpu_id);
 extern void cacheinfo_cpu_offline(unsigned int cpu_id);
 
+/* Allow migration/suspend to tear down and rebuild the hierarchy. */
+extern void cacheinfo_teardown(void);
+extern void cacheinfo_rebuild(void);
+
 #endif /* _PPC_CACHEINFO_H */
Signature · 1 line
2.20.1
author maintainer
#112 lore raw

PATCH 153/251 drm/msm/mdp5: Fix mdp5_cfg_init error return

In reply to Sasha Levin

From: Jeffrey Hugo <[email protected]>

[ Upstream commit fc19cbb785d7bbd1a1af26229b5240a3ab332744 ]

If mdp5_cfg_init fails because of an unknown major version, a null pointer dereference occurs. This is because the caller of init expects error pointers, but init returns NULL on error. Fix this by returning the expected values on error.

Fixes 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module)
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +1 -1
index 8b4e3004f451..86b0448d2ce5 100644
@@ -542,7 +542,7 @@ struct mdp5_cfg_handler *mdp5_cfg_init(struct mdp5_kms *mdp5_kms,
 	if (cfg_handler)
 		mdp5_cfg_destroy(cfg_handler);
 
-	return NULL;
+	return ERR_PTR(ret);
 }
 
 static struct mdp5_cfg_platform *mdp5_get_config(struct platform_device *dev)
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#80 lore raw

PATCH 121/251 dmaengine: axi-dmac: Don't check the number of frames for alignment

In reply to Sasha Levin

From: Alexandru Ardelean <[email protected]>

[ Upstream commit 648865a79d8ee3d1aa64aab5eb2a9d12eeed14f9 ]

In 2D transfers (for the AXI DMAC), the number of frames (numf) represents Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful for video transfers where screen resolutions ( X * Y ) are typically aligned for X, but not for Y.

There is no requirement for Y_LENGTH to be aligned to the bus-width (or anything), and this is also true for AXI DMAC.

Checking the Y_LENGTH for alignment causes false errors when initiating DMA transfers. This change fixes this by checking only that the Y_LENGTH is non-zero.

Fixes 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
---
 drivers/dma/dma-axi-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/dma-axi-dmac.c +1 -1
index 7f0b9aa15867..9887f2a14aa9 100644
@@ -451,7 +451,7 @@ static struct dma_async_tx_descriptor *axi_dmac_prep_interleaved(
 
 	if (chan->hw_2d) {
 		if (!axi_dmac_check_len(chan, xt->sgl[0].size) ||
-		    !axi_dmac_check_len(chan, xt->numf))
+		    xt->numf == 0)
 			return NULL;
 		if (xt->sgl[0].size + dst_icg > chan->max_length ||
 		    xt->sgl[0].size + src_icg > chan->max_length)
Signature · 1 line
2.20.1
author maintainer
#114 lore raw

PATCH 155/251 net/af_iucv: always register net_device notifier

In reply to Sasha Levin

From: Julian Wiedmann <[email protected]>

[ Upstream commit 06996c1d4088a0d5f3e7789d7f96b4653cc947cc ]

Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still open HiperTransport-based connections. For robust operation these connections require the af_iucv_netdev_notifier, so register it unconditionally.

Also handle any error that register_netdevice_notifier() returns.

Fixes 9fbd87d41392 ("af_iucv: handle netdev events")
---
 net/iucv/af_iucv.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)
net/iucv/af_iucv.c +20 -7
index c2dfc32eb9f2..02e10deef5b4 100644
@@ -2431,6 +2431,13 @@ static int afiucv_iucv_init(void)
 	return err;
 }
 
+static void afiucv_iucv_exit(void)
+{
+	device_unregister(af_iucv_dev);
+	driver_unregister(&af_iucv_driver);
+	pr_iucv->iucv_unregister(&af_iucv_handler, 0);
+}
+
 static int __init afiucv_init(void)
 {
 	int err;
@@ -2464,11 +2471,18 @@ static int __init afiucv_init(void)
 		err = afiucv_iucv_init();
 		if (err)
 			goto out_sock;
-	} else
-		register_netdevice_notifier(&afiucv_netdev_notifier);
+	}
+
+	err = register_netdevice_notifier(&afiucv_netdev_notifier);
+	if (err)
+		goto out_notifier;
+
 	dev_add_pack(&iucv_packet_type);
 	return 0;
 
+out_notifier:
+	if (pr_iucv)
+		afiucv_iucv_exit();
 out_sock:
 	sock_unregister(PF_IUCV);
 out_proto:
@@ -2482,12 +2496,11 @@ static int __init afiucv_init(void)
 static void __exit afiucv_exit(void)
 {
 	if (pr_iucv) {
-		device_unregister(af_iucv_dev);
-		driver_unregister(&af_iucv_driver);
-		pr_iucv->iucv_unregister(&af_iucv_handler, 0);
+		afiucv_iucv_exit();
 		symbol_put(iucv_if);
-	} else
-		unregister_netdevice_notifier(&afiucv_netdev_notifier);
+	}
+
+	unregister_netdevice_notifier(&afiucv_netdev_notifier);
 	dev_remove_pack(&iucv_packet_type);
 	sock_unregister(PF_IUCV);
 	proto_unregister(&iucv_proto);
Signature · 1 line
2.20.1
author maintainer
#117 lore raw

PATCH 158/251 drm/msm/a3xx: remove TPL1 regs from snapshot

In reply to Sasha Levin

From: Rob Clark <[email protected]>

[ Upstream commit f47bee2ba447bebc304111c16ef1e1a73a9744dd ]

These regs are write-only, and the hw throws a hissy-fit (ie. reboots) when we try to read them for GPU state snapshot, in response to a GPU hang. It is rather impolite when GPU recovery triggers an insta- reboot, so lets remove the TPL1 registers from the snapshot.

Fixes 7198e6b03155 drm/msm: add a3xx gpu support
---
 drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)
drivers/gpu/drm/msm/adreno/a3xx_gpu.c +11 -13
index fd266ed963b6..25a0e7d13340 100644
@@ -383,19 +383,17 @@ static const unsigned int a3xx_registers[] = {
 	0x2200, 0x2212, 0x2214, 0x2217, 0x221a, 0x221a, 0x2240, 0x227e,
 	0x2280, 0x228b, 0x22c0, 0x22c0, 0x22c4, 0x22ce, 0x22d0, 0x22d8,
 	0x22df, 0x22e6, 0x22e8, 0x22e9, 0x22ec, 0x22ec, 0x22f0, 0x22f7,
-	0x22ff, 0x22ff, 0x2340, 0x2343, 0x2348, 0x2349, 0x2350, 0x2356,
-	0x2360, 0x2360, 0x2440, 0x2440, 0x2444, 0x2444, 0x2448, 0x244d,
-	0x2468, 0x2469, 0x246c, 0x246d, 0x2470, 0x2470, 0x2472, 0x2472,
-	0x2474, 0x2475, 0x2479, 0x247a, 0x24c0, 0x24d3, 0x24e4, 0x24ef,
-	0x2500, 0x2509, 0x250c, 0x250c, 0x250e, 0x250e, 0x2510, 0x2511,
-	0x2514, 0x2515, 0x25e4, 0x25e4, 0x25ea, 0x25ea, 0x25ec, 0x25ed,
-	0x25f0, 0x25f0, 0x2600, 0x2612, 0x2614, 0x2617, 0x261a, 0x261a,
-	0x2640, 0x267e, 0x2680, 0x268b, 0x26c0, 0x26c0, 0x26c4, 0x26ce,
-	0x26d0, 0x26d8, 0x26df, 0x26e6, 0x26e8, 0x26e9, 0x26ec, 0x26ec,
-	0x26f0, 0x26f7, 0x26ff, 0x26ff, 0x2740, 0x2743, 0x2748, 0x2749,
-	0x2750, 0x2756, 0x2760, 0x2760, 0x300c, 0x300e, 0x301c, 0x301d,
-	0x302a, 0x302a, 0x302c, 0x302d, 0x3030, 0x3031, 0x3034, 0x3036,
-	0x303c, 0x303c, 0x305e, 0x305f,
+	0x22ff, 0x22ff, 0x2340, 0x2343, 0x2440, 0x2440, 0x2444, 0x2444,
+	0x2448, 0x244d, 0x2468, 0x2469, 0x246c, 0x246d, 0x2470, 0x2470,
+	0x2472, 0x2472, 0x2474, 0x2475, 0x2479, 0x247a, 0x24c0, 0x24d3,
+	0x24e4, 0x24ef, 0x2500, 0x2509, 0x250c, 0x250c, 0x250e, 0x250e,
+	0x2510, 0x2511, 0x2514, 0x2515, 0x25e4, 0x25e4, 0x25ea, 0x25ea,
+	0x25ec, 0x25ed, 0x25f0, 0x25f0, 0x2600, 0x2612, 0x2614, 0x2617,
+	0x261a, 0x261a, 0x2640, 0x267e, 0x2680, 0x268b, 0x26c0, 0x26c0,
+	0x26c4, 0x26ce, 0x26d0, 0x26d8, 0x26df, 0x26e6, 0x26e8, 0x26e9,
+	0x26ec, 0x26ec, 0x26f0, 0x26f7, 0x26ff, 0x26ff, 0x2740, 0x2743,
+	0x300c, 0x300e, 0x301c, 0x301d, 0x302a, 0x302a, 0x302c, 0x302d,
+	0x3030, 0x3031, 0x3034, 0x3036, 0x303c, 0x303c, 0x305e, 0x305f,
 	~0   /* sentinel */
 };
 
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#120 lore raw

PATCH 161/251 clk: qcom: Fix -Wunused-const-variable

In reply to Sasha Levin

From: Nathan Huckleberry <[email protected]>

[ Upstream commit da642427bd7710ec4f4140f693f59aa8521a358c ]

Clang produces the following warning

drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable] static const struct
parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] =
{ ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^ drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^ drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = {

It looks like these were never used.

---
 drivers/clk/qcom/gcc-msm8996.c | 36 ----------------------------------
 1 file changed, 36 deletions(-)
drivers/clk/qcom/gcc-msm8996.c +0 -36
index fe03e6fbc7df..ea6c227331fc 100644
@@ -140,22 +140,6 @@ static const char * const gcc_xo_gpll0_gpll4_gpll0_early_div[] = {
 	"gpll0_early_div"
 };
 
-static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] = {
-	{ P_XO, 0 },
-	{ P_GPLL0, 1 },
-	{ P_GPLL2, 2 },
-	{ P_GPLL3, 3 },
-	{ P_GPLL0_EARLY_DIV, 6 }
-};
-
-static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = {
-	"xo",
-	"gpll0",
-	"gpll2",
-	"gpll3",
-	"gpll0_early_div"
-};
-
 static const struct parent_map gcc_xo_gpll0_gpll1_early_div_gpll1_gpll4_gpll0_early_div_map[] = {
 	{ P_XO, 0 },
 	{ P_GPLL0, 1 },
@@ -194,26 +178,6 @@ static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll2_early_gpll0_early
 	"gpll0_early_div"
 };
 
-static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = {
-	{ P_XO, 0 },
-	{ P_GPLL0, 1 },
-	{ P_GPLL2, 2 },
-	{ P_GPLL3, 3 },
-	{ P_GPLL1, 4 },
-	{ P_GPLL4, 5 },
-	{ P_GPLL0_EARLY_DIV, 6 }
-};
-
-static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = {
-	"xo",
-	"gpll0",
-	"gpll2",
-	"gpll3",
-	"gpll1",
-	"gpll4",
-	"gpll0_early_div"
-};
-
 static struct clk_fixed_factor xo = {
 	.mult = 1,
 	.div = 1,
Signature · 1 line
2.20.1
author maintainer
#121 lore raw

PATCH 162/251 iommu/amd: Make iommu_disable safer

In reply to Sasha Levin

From: Kevin Mitchell <[email protected]>

[ Upstream commit 3ddbe913e55516d3e2165d43d4d5570761769878 ]

Make it safe to call iommu_disable during early init error conditions before mmio_base is set, but after the struct amd_iommu has been added to the amd_iommu_list. For example, this happens if firmware fails to fill in mmio_phys in the ACPI table leading to a NULL pointer dereference in iommu_feature_disable.

Fixes 2c0ae1720c09c ('iommu/amd: Convert iommu initialization to state machine')
---
 drivers/iommu/amd_iommu_init.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/iommu/amd_iommu_init.c +3 -0
index 9bb8d64b6f94..c113e46fdc3a 100644
@@ -383,6 +383,9 @@ static void iommu_enable(struct amd_iommu *iommu)
 
 static void iommu_disable(struct amd_iommu *iommu)
 {
+	if (!iommu->mmio_base)
+		return;
+
 	/* Disable command buffer */
 	iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
 
Signature · 1 line
2.20.1
author maintainer
#122 lore raw

PATCH 163/251 mfd: intel-lpss: Release IDA resources

In reply to Sasha Levin

From: Andy Shevchenko <[email protected]>

[ Upstream commit 02f36911c1b41fcd8779fa0c135aab0554333fa5 ]

ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit().

Fixes 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
---
 drivers/mfd/intel-lpss.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/intel-lpss.c +1 -0
index 22dd8c055048..71cecd7aeea0 100644
@@ -533,6 +533,7 @@ module_init(intel_lpss_init);
 
 static void __exit intel_lpss_exit(void)
 {
+	ida_destroy(&intel_lpss_devid_ida);
 	debugfs_remove(intel_lpss_debugfs);
 }
 module_exit(intel_lpss_exit);
Signature · 1 line
2.20.1
author maintainer
#123 lore raw

PATCH 164/251 rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()

In reply to Sasha Levin

From: David Howells <[email protected]>

[ Upstream commit 3427beb6375d04e9627c67343872e79341a684ea ]

With gcc 4.1:

net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function

Indeed, if the first jump to the send_fragmentable label is made, and the address family is not handled in the switch() statement, ret will be used uninitialized.

Fix this by BUG()'ing as is done in other places in rxrpc where internal support for future address families will need adding. It should not be possible to reach this normally as the address families are checked up-front.

Fixes 5a924b8951f835b5 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
---
 net/rxrpc/output.c | 3 +++
 1 file changed, 3 insertions(+)
net/rxrpc/output.c +3 -0
index 59d328603312..64389f493bb2 100644
@@ -400,6 +400,9 @@ int rxrpc_send_data_packet(struct rxrpc_call *call, struct sk_buff *skb,
 		}
 		break;
 #endif
+
+	default:
+		BUG();
 	}
 
 	up_write(&conn->params.local->defrag_sem);
Signature · 1 line
2.20.1
author maintainer
#126 lore raw

PATCH 167/251 net: pasemi: fix an use-after-free in pasemi_mac_phy_init()

In reply to Sasha Levin

From: Wen Yang <[email protected]>

[ Upstream commit faf5577f2498cea23011b5c785ef853ded22700b ]

The phy_dn variable is still being used in of_phy_connect() after the of_node_put() call, which may result in use-after-free.

Fixes 1dd2d06c0459 ("net: Rework pasemi_mac driver to use of_mdio infrastructure")
Cc "David S. Miller" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Luis Chamberlain <[email protected]>
Cc Michael Ellerman <[email protected]>
---
 drivers/net/ethernet/pasemi/pasemi_mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/pasemi/pasemi_mac.c +1 -1
index 2f4a837f0d6a..dcd56ac68748 100644
@@ -1053,7 +1053,6 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 
 	dn = pci_device_to_OF_node(mac->pdev);
 	phy_dn = of_parse_phandle(dn, "phy-handle", 0);
-	of_node_put(phy_dn);
 
 	mac->link = 0;
 	mac->speed = 0;
@@ -1062,6 +1061,7 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 	phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0,
 				PHY_INTERFACE_MODE_SGMII);
 
+	of_node_put(phy_dn);
 	if (!phydev) {
 		printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
 		return -ENODEV;
Signature · 1 line
2.20.1
author maintainer
#130 lore raw

PATCH 171/251 usb: host: xhci-hub: fix extra endianness conversion

In reply to Sasha Levin

From: Ruslan Bilovol <[email protected]>

[ Upstream commit 6269e4c76eacabaea0d0099200ae1a455768d208 ]

Don't do extra cpu_to_le32 conversion for put_unaligned_le32 because it is already implemented in this function.

Fixes sparse error:
xhci-hub.c:1152:44: warning: incorrect type in argument 1 (different base types)
xhci-hub.c:1152:44: expected unsigned int [usertype] val
xhci-hub.c:1152:44: got restricted __le32 [usertype]

Fixes 395f540 "xhci: support new USB 3.1 hub request to get extended port status"
Cc Mathias Nyman <[email protected]>
---
 drivers/usb/host/xhci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/xhci-hub.c +1 -1
index 5cf5f3d9c1e5..04d36fa60734 100644
@@ -989,7 +989,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			}
 			port_li = readl(port_array[wIndex] + PORTLI);
 			status = xhci_get_ext_port_status(temp, port_li);
-			put_unaligned_le32(cpu_to_le32(status), &buf[4]);
+			put_unaligned_le32(status, &buf[4]);
 		}
 		break;
 	case SetPortFeature:
Signature · 1 line
2.20.1
author maintainer
#98 lore raw

PATCH 139/251 ARM: riscpc: fix lack of keyboard interrupts after irq conversion

In reply to Sasha Levin

From: Russell King <[email protected]>

[ Upstream commit 63a0666bca9311f35017be454587f3ba903644b8 ]

Fix lack of keyboard interrupts for RiscPC due to incorrect conversion.

Fixes e8d36d5dbb6a ("ARM: kill off set_irq_flags usage")
---
 arch/arm/mach-rpc/irq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-rpc/irq.c +2 -1
index 66502e6207fe..fce7fecbd8fa 100644
@@ -117,7 +117,7 @@ extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, clr, set = 0;
+	unsigned int irq, clr, set;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -129,6 +129,7 @@ void __init rpc_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
+		set = 0;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
 			clr |= IRQ_NOPROBE;
Signature · 1 line
2.20.1
author maintainer
#133 lore raw

PATCH 174/251 ALSA: aoa: onyx: always initialize register read value

In reply to Sasha Levin

From: Johannes Berg <[email protected]>

[ Upstream commit f474808acb3c4b30552d9c59b181244e0300d218 ]

A lot of places in the driver use onyx_read_register() without checking the return value, and it's been working OK for ~10 years or so, so probably never fails ... Rather than trying to check the return value everywhere, which would be relatively intrusive, at least make sure we don't use an uninitialized value.

Fixes f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
---
 sound/aoa/codecs/onyx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
sound/aoa/codecs/onyx.c +3 -1
index a04edff8b729..ae50d59fb810 100644
@@ -74,8 +74,10 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
 		return 0;
 	}
 	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
-	if (v < 0)
+	if (v < 0) {
+		*value = 0;
 		return -1;
+	}
 	*value = (u8)v;
 	onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#134 lore raw

PATCH 175/251 coredump: split pipe command whitespace before expanding template

In reply to Sasha Levin

From: Paul Wise <[email protected]>

[ Upstream commit 315c69261dd3fa12dbc830d4fa00d1fad98d3b03 ]

Save the offsets of the start of each argument to avoid having to update pointers to each argument after every corename krealloc and to avoid having to duplicate the memory for the dump command.

Executable names containing spaces were previously being expanded from %e or %E and then split in the middle of the filename. This is incorrect behaviour since an argument list can represent arguments with spaces.

The splitting could lead to extra arguments being passed to the core dump handler that it might have interpreted as options or ignored completely.

Core dump handlers that are not aware of this Linux kernel issue will be using %e or %E without considering that it may be split and so they will be vulnerable to processes with spaces in their names breaking their argument list. If their internals are otherwise well written, such as if they are written in shell but quote arguments, they will work better after this change than before. If they are not well written, then there is a slight chance of breakage depending on the details of the code but they will already be fairly broken by the split filenames.

Core dump handlers that are aware of this Linux kernel issue will be placing %e or %E as the last item in their core_pattern and then aggregating all of the remaining arguments into one, separated by spaces. Alternatively they will be obtaining the filename via other methods. Both of these will be compatible with the new arrangement.

A side effect from this change is that unknown template types (for example %z) result in an empty argument to the dump handler instead of the argument being dropped. This is a desired change as:

It is easier for dump handlers to process empty arguments than dropped ones, especially if they are written in shell or don't pass each template item with a preceding command-line option in order to differentiate between individual template types. Most core_patterns in the wild do not use options so they can confuse different template types (especially numeric ones) if an earlier one gets dropped in old kernels. If the kernel introduces a new template type and a core_pattern uses it, the core dump handler might not expect that the argument can be dropped in old kernels.

For example, this can result in security issues when %d is dropped in old kernels. This happened with the corekeeper package in Debian and resulted in the interface between corekeeper and Linux having to be rewritten to use command-line options to differentiate between template types.

The core_pattern for most core dump handlers is written by the handler author who would generally not insert unknown template types so this change should be compatible with all the core dump handlers that exist.

---
 fs/coredump.c | 44 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)
fs/coredump.c +39 -5
index 4407e27beca9..98a45a727eb8 100644
@@ -6,6 +6,7 @@
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/swap.h>
+#include <linux/ctype.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
@@ -184,11 +185,13 @@ static int cn_print_exe_file(struct core_name *cn)
  * name into corename, which must have space for at least
  * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator.
  */
-static int format_corename(struct core_name *cn, struct coredump_params *cprm)
+static int format_corename(struct core_name *cn, struct coredump_params *cprm,
+			   size_t **argv, int *argc)
 {
 	const struct cred *cred = current_cred();
 	const char *pat_ptr = core_pattern;
 	int ispipe = (*pat_ptr == '|');
+	bool was_space = false;
 	int pid_in_pattern = 0;
 	int err = 0;
 
@@ -198,12 +201,35 @@ static int format_corename(struct core_name *cn, struct coredump_params *cprm)
 		return -ENOMEM;
 	cn->corename[0] = '\0';
 
-	if (ispipe)
+	if (ispipe) {
+		int argvs = sizeof(core_pattern) / 2;
+		(*argv) = kmalloc_array(argvs, sizeof(**argv), GFP_KERNEL);
+		if (!(*argv))
+			return -ENOMEM;
+		(*argv)[(*argc)++] = 0;
 		++pat_ptr;
+	}
 
 	/* Repeat as long as we have more pattern to process and more output
 	   space */
 	while (*pat_ptr) {
+		/*
+		 * Split on spaces before doing template expansion so that
+		 * %e and %E don't get split if they have spaces in them
+		 */
+		if (ispipe) {
+			if (isspace(*pat_ptr)) {
+				was_space = true;
+				pat_ptr++;
+				continue;
+			} else if (was_space) {
+				was_space = false;
+				err = cn_printf(cn, "%c", '\0');
+				if (err)
+					return err;
+				(*argv)[(*argc)++] = cn->used;
+			}
+		}
 		if (*pat_ptr != '%') {
 			err = cn_printf(cn, "%c", *pat_ptr++);
 		} else {
@@ -543,6 +569,8 @@ void do_coredump(const siginfo_t *siginfo)
 	struct cred *cred;
 	int retval = 0;
 	int ispipe;
+	size_t *argv = NULL;
+	int argc = 0;
 	struct files_struct *displaced;
 	/* require nonrelative corefile path and be extra careful */
 	bool need_suid_safe = false;
@@ -589,9 +617,10 @@ void do_coredump(const siginfo_t *siginfo)
 
 	old_cred = override_creds(cred);
 
-	ispipe = format_corename(&cn, &cprm);
+	ispipe = format_corename(&cn, &cprm, &argv, &argc);
 
 	if (ispipe) {
+		int argi;
 		int dump_count;
 		char **helper_argv;
 		struct subprocess_info *sub_info;
@@ -634,12 +663,16 @@ void do_coredump(const siginfo_t *siginfo)
 			goto fail_dropcount;
 		}
 
-		helper_argv = argv_split(GFP_KERNEL, cn.corename, NULL);
+		helper_argv = kmalloc_array(argc + 1, sizeof(*helper_argv),
+					    GFP_KERNEL);
 		if (!helper_argv) {
 			printk(KERN_WARNING "%s failed to allocate memory\n",
 			       __func__);
 			goto fail_dropcount;
 		}
+		for (argi = 0; argi < argc; argi++)
+			helper_argv[argi] = cn.corename + argv[argi];
+		helper_argv[argi] = NULL;
 
 		retval = -ENOMEM;
 		sub_info = call_usermodehelper_setup(helper_argv[0],
@@ -649,7 +682,7 @@ void do_coredump(const siginfo_t *siginfo)
 			retval = call_usermodehelper_exec(sub_info,
 							  UMH_WAIT_EXEC);
 
-		argv_free(helper_argv);
+		kfree(helper_argv);
 		if (retval) {
 			printk(KERN_INFO "Core dump to |%s pipe failed\n",
 			       cn.corename);
@@ -768,6 +801,7 @@ void do_coredump(const siginfo_t *siginfo)
 	if (ispipe)
 		atomic_dec(&core_dump_count);
 fail_unlock:
+	kfree(argv);
 	kfree(cn.corename);
 	coredump_finish(mm, core_dumped);
 	revert_creds(old_cred);
Signature · 1 line
2.20.1
author maintainer
#139 lore raw

PATCH 179/251 ext4: set error return correctly when ext4_htree_store_dirent fails

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit 7a14826ede1d714f0bb56de8167c0e519041eeda ]

Currently when the call to ext4_htree_store_dirent fails the error return variable 'ret' is is not being set to the error code and variable count is instead, hence the error code is not being returned. Fix this by assigning ret to the error return code.

Addresses-Coverity: ("Unused value")

Fixes 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index")
---
 fs/ext4/inline.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ext4/inline.c +1 -1
index 9a13f86fed62..4df4d31057b3 100644
@@ -1417,7 +1417,7 @@ int htree_inlinedir_to_tree(struct file *dir_file,
 		err = ext4_htree_store_dirent(dir_file, hinfo->hash,
 					      hinfo->minor_hash, de, &tmp_str);
 		if (err) {
-			count = err;
+			ret = err;
 			goto out;
 		}
 		count++;
Signature · 1 line
2.20.1
author maintainer
#141 lore raw

PATCH 181/251 ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 9b4275c415acca6264a3d7f1182589959c93d530 ]

sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]

cs4349_runtime_pm ops already defined, it seems we should enable it.

Fixes e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
---
 sound/soc/codecs/cs4349.c | 1 +
 1 file changed, 1 insertion(+)
sound/soc/codecs/cs4349.c +1 -0
index 231ca935cdf3..c232c42ccead 100644
@@ -380,6 +380,7 @@ static struct i2c_driver cs4349_i2c_driver = {
 	.driver = {
 		.name		= "cs4349",
 		.of_match_table	= cs4349_of_match,
+		.pm = &cs4349_runtime_pm,
 	},
 	.id_table	= cs4349_i2c_id,
 	.probe		= cs4349_i2c_probe,
Signature · 1 line
2.20.1
author maintainer
#142 lore raw

PATCH 182/251 ASoC: wm8737: Fix copy-paste error in wm8737_snd_controls

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 554b75bde64bcad9662530726d1483f7ef012069 ]

sound/soc/codecs/wm8737.c:112:29: warning:
high_3d defined but not used [-Wunused-const-variable=]

'high_3d' should be used for 3D High Cut-off.

---
 sound/soc/codecs/wm8737.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/wm8737.c +1 -1
index f0cb1c4afe3c..c5a8d758f58b 100644
@@ -170,7 +170,7 @@ SOC_DOUBLE("Polarity Invert Switch", WM8737_ADC_CONTROL, 5, 6, 1, 0),
 SOC_SINGLE("3D Switch", WM8737_3D_ENHANCE, 0, 1, 0),
 SOC_SINGLE("3D Depth", WM8737_3D_ENHANCE, 1, 15, 0),
 SOC_ENUM("3D Low Cut-off", low_3d),
-SOC_ENUM("3D High Cut-off", low_3d),
+SOC_ENUM("3D High Cut-off", high_3d),
 SOC_SINGLE_TLV("3D ADC Volume", WM8737_3D_ENHANCE, 7, 1, 1, adc_tlv),
 
 SOC_SINGLE("Noise Gate Switch", WM8737_NOISE_GATE, 0, 1, 0),
Signature · 1 line
2.20.1
author maintainer
#144 lore raw

PATCH 184/251 ASoC: sun4i-i2s: RX and TX counter registers are swapped

In reply to Sasha Levin

From: Maxime Ripard <[email protected]>

[ Upstream commit cf2c0e1ce9544df42170fb921f12da82dc0cc8d6 ]

The RX and TX counters registers offset have been swapped, fix that.

---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/sunxi/sun4i-i2s.c +2 -2
index 15c92400cea4..02c373c65e19 100644
@@ -78,8 +78,8 @@
 #define SUN4I_I2S_CLK_DIV_MCLK_MASK		GENMASK(3, 0)
 #define SUN4I_I2S_CLK_DIV_MCLK(mclk)			((mclk) << 0)
 
-#define SUN4I_I2S_RX_CNT_REG		0x28
-#define SUN4I_I2S_TX_CNT_REG		0x2c
+#define SUN4I_I2S_TX_CNT_REG		0x28
+#define SUN4I_I2S_RX_CNT_REG		0x2c
 
 #define SUN4I_I2S_TX_CHAN_SEL_REG	0x30
 #define SUN4I_I2S_TX_CHAN_SEL(num_chan)		(((num_chan) - 1) << 0)
Signature · 1 line
2.20.1
author maintainer
#149 lore raw

PATCH 189/251 Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"

In reply to Sasha Levin

From: Linus Torvalds <[email protected]>

[ Upstream commit ab9bb6318b0967671e0c9b6537c1537d51ca4f45 ]

Commit dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()") made the kfifo code round the number of elements up. That was good for __kfifo_alloc(), but it's actually wrong for __kfifo_init().

The difference? __kfifo_alloc() will allocate the rounded-up number of elements, but __kfifo_init() uses an allocation done by the caller. We can't just say "use more elements than the caller allocated", and have to round down.

The good news? All the normal cases will be using power-of-two arrays anyway, and most users of kfifo's don't use kfifo_init() at all, but one of the helper macros to declare a KFIFO that enforce the proper power-of-two behavior. But it looks like at least ibmvscsis might be affected.

The bad news? Will Deacon refers to an old thread and points points out that the memory ordering in kfifo's is questionable. See

https://lore.kernel.org/lkml/[email protected]/

for more.

Fixes dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()")
Cc Stefani Seibold <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Dan Carpenter <[email protected]>
Cc Greg KH <[email protected]>
Cc Kees Cook <[email protected]>
Cc Will Deacon <[email protected]>
---
 lib/kfifo.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
lib/kfifo.c +2 -1
index 90ba1eb1df06..a94227c55551 100644
@@ -82,7 +82,8 @@ int __kfifo_init(struct __kfifo *fifo, void *buffer,
 {
 	size /= esize;
 
-	size = roundup_pow_of_two(size);
+	if (!is_power_of_2(size))
+		size = rounddown_pow_of_two(size);
 
 	fifo->in = 0;
 	fifo->out = 0;
Signature · 1 line
2.20.1
author maintainer
#115 lore raw

PATCH 156/251 ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRs

In reply to Sasha Levin

From: Peter Ujfalusi <[email protected]>

[ Upstream commit fd14f4436fd47d5418023c90e933e66d3645552e ]

If multiple serializers are connected in the system and the number of channels will need to use more than one serializer the mask to enable the serializers were left to 0 if tdm_mask is provided

Fixes dd55ff8346a97 ("ASoC: davinci-mcasp: Add set_tdm_slots() support")
---
 sound/soc/davinci/davinci-mcasp.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
sound/soc/davinci/davinci-mcasp.c +6 -7
index 624c209c9498..d1935c5c3602 100644
@@ -882,14 +882,13 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream,
 		active_slots = hweight32(mcasp->tdm_mask[stream]);
 		active_serializers = (channels + active_slots - 1) /
 			active_slots;
-		if (active_serializers == 1) {
+		if (active_serializers == 1)
 			active_slots = channels;
-			for (i = 0; i < total_slots; i++) {
-				if ((1 << i) & mcasp->tdm_mask[stream]) {
-					mask |= (1 << i);
-					if (--active_slots <= 0)
-						break;
-				}
+		for (i = 0; i < total_slots; i++) {
+			if ((1 << i) & mcasp->tdm_mask[stream]) {
+				mask |= (1 << i);
+				if (--active_slots <= 0)
+					break;
 			}
 		}
 	} else {
Signature · 1 line
2.20.1
author maintainer
#116 lore raw

PATCH 157/251 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq

In reply to Sasha Levin

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 3572e8aea3bf925dac1dbf86127657c39fe5c254 ]

Besides the alarm, the PCF8563 also has a timer triggered interrupt. In cases where the previous system left the timer and interrupts on, or somehow the bits got enabled, the interrupt would keep triggering as the kernel doesn't know about it.

Clear both the alarm and timer event flags, and disable the interrupts, before requesting the interrupt line.

Fixes ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support")
Fixes a45d528aab8b ("rtc: pcf8563: clear expired alarm at boot time")
---
 drivers/rtc/rtc-pcf8563.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/rtc/rtc-pcf8563.c +5 -6
index a4b8b603c807..533fb7027f0c 100644
@@ -563,7 +563,6 @@ static int pcf8563_probe(struct i2c_client *client,
 	struct pcf8563 *pcf8563;
 	int err;
 	unsigned char buf;
-	unsigned char alm_pending;
 
 	dev_dbg(&client->dev, "%s\n", __func__);
 
@@ -587,13 +586,13 @@ static int pcf8563_probe(struct i2c_client *client,
 		return err;
 	}
 
-	err = pcf8563_get_alarm_mode(client, NULL, &alm_pending);
-	if (err) {
-		dev_err(&client->dev, "%s: read error\n", __func__);
+	/* Clear flags and disable interrupts */
+	buf = 0;
+	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
 		return err;
 	}
-	if (alm_pending)
-		pcf8563_set_alarm_mode(client, 0);
 
 	pcf8563->rtc = devm_rtc_device_register(&client->dev,
 				pcf8563_driver.driver.name,
Signature · 1 line
2.20.1
author maintainer
#152 lore raw

PATCH 192/251 x86, perf: Fix the dependency of the x86 insn decoder selftest

In reply to Sasha Levin

From: Masami Hiramatsu <[email protected]>

[ Upstream commit 7720804a2ae46c90265a32c81c45fb6f8d2f4e8b ]

Since x86 instruction decoder is not only for kprobes, it should be tested when the insn.c is compiled. (e.g. perf is enabled but kprobes is disabled)

Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Fixes cbe5c34c8c1f ("x86: Compile insn.c and inat.c only for KPROBES")
---
 arch/x86/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/Kconfig.debug +1 -1
index 4386440fe463..f09a192260f8 100644
@@ -192,7 +192,7 @@ config HAVE_MMIOTRACE_SUPPORT
 
 config X86_DECODER_SELFTEST
 	bool "x86 instruction decoder selftest"
-	depends on DEBUG_KERNEL && KPROBES
+	depends on DEBUG_KERNEL && INSTRUCTION_DECODER
 	depends on !COMPILE_TEST
 	---help---
 	 Perform x86 instruction decoder selftests at build time.
Signature · 1 line
2.20.1
author maintainer
#154 lore raw

PATCH 194/251 bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit 420c20be08a4597404d272ae9793b642401146eb ]

An earlier commit re-worked the setting of the bitmask and is now assigning v with some bit flags rather than bitwise or-ing them into v, consequently the earlier bit-settings of v are being lost. Fix this by replacing an assignment with the bitwise or instead.

Addresses-Coverity: ("Unused value")

Fixes 2be25cac8402 ("bcma: add constants for PCI and use them")
---
 drivers/bcma/driver_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/bcma/driver_pci.c +2 -2
index f499a469e66d..12b2cc9a3fbe 100644
@@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
 	}
 
-	v = BCMA_CORE_PCI_MDIODATA_START;
+	v |= BCMA_CORE_PCI_MDIODATA_START;
 	v |= BCMA_CORE_PCI_MDIODATA_READ;
 	v |= BCMA_CORE_PCI_MDIODATA_TA;
 
@@ -121,7 +121,7 @@ static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device,
 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
 	}
 
-	v = BCMA_CORE_PCI_MDIODATA_START;
+	v |= BCMA_CORE_PCI_MDIODATA_START;
 	v |= BCMA_CORE_PCI_MDIODATA_WRITE;
 	v |= BCMA_CORE_PCI_MDIODATA_TA;
 	v |= data;
Signature · 1 line
2.20.1
author maintainer
#162 lore raw

PATCH 202/251 iommu/amd: Wait for completion of IOTLB flush in attach_device

In reply to Sasha Levin

From: Filippo Sironi <[email protected]>

[ Upstream commit 0b15e02f0cc4fb34a9160de7ba6db3a4013dc1b7 ]

To make sure the domain tlb flush completes before the function returns, explicitly wait for its completion.

Fixes 42a49f965a8d ("amd-iommu: flush domain tlb when attaching a new device")
[joro: Added commit message and fixes tag]
---
 drivers/iommu/amd_iommu.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/iommu/amd_iommu.c +2 -0
index c898c70472bb..bb0448c91f67 100644
@@ -2113,6 +2113,8 @@ static int attach_device(struct device *dev,
 	 */
 	domain_flush_tlb_pde(domain);
 
+	domain_flush_complete(domain);
+
 	return ret;
 }
 
Signature · 1 line
2.20.1
author maintainer
#171 lore raw

PATCH 211/251 mac80211: accept deauth frames in IBSS mode

In reply to Sasha Levin

From: Johannes Berg <[email protected]>

[ Upstream commit 95697f9907bfe3eab0ef20265a766b22e27dde64 ]

We can process deauth frames and all, but we drop them very early in the RX path today - this could never have worked.

Fixes 2cc59e784b54 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS")
---
 net/mac80211/rx.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
net/mac80211/rx.c +10 -1
index 3b423c50ec8f..74652eb2f90f 100644
@@ -3205,9 +3205,18 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
 	case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
 		/* process for all: mesh, mlme, ibss */
 		break;
+	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+		if (is_multicast_ether_addr(mgmt->da) &&
+		    !is_broadcast_ether_addr(mgmt->da))
+			return RX_DROP_MONITOR;
+
+		/* process only for station/IBSS */
+		if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+		    sdata->vif.type != NL80211_IFTYPE_ADHOC)
+			return RX_DROP_MONITOR;
+		break;
 	case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
 	case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
-	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
 	case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
 		if (is_multicast_ether_addr(mgmt->da) &&
 		    !is_broadcast_ether_addr(mgmt->da))
Signature · 1 line
2.20.1
author maintainer
#136 lore raw

PATCH 177/251 cifs: fix rmmod regression in cifs.ko caused by force_sig changes

In reply to Sasha Levin

From: Steve French <[email protected]>

[ Upstream commit 247bc9470b1eeefc7b58cdf2c39f2866ba651509 ]

Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

The global change from force_sig caused module unloading of cifs.ko to fail (since the cifsd process could not be killed, "rmmod cifs" now would always fail)

---
 fs/cifs/connect.c | 1 +
 1 file changed, 1 insertion(+)
fs/cifs/connect.c +1 -0
index 110febd69737..7d46025d5e89 100644
@@ -885,6 +885,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
+	allow_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
Signature · 1 line
2.20.1
author maintainer
#172 lore raw

PATCH 212/251 llc: fix another potential sk_buff leak in llc_ui_sendmsg()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit fc8d5db10cbe1338a52ebc74e7feab9276721774 ]

All callers of llc_conn_state_process() except llc_build_and_send_pkt() (via llc_ui_sendmsg() -> llc_ui_send_data()) assume that it always consumes a reference to the skb. Fix this caller to do the same.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/af_llc.c   | 34 ++++++++++++++++++++--------------
 net/llc/llc_conn.c |  2 ++
 net/llc/llc_if.c   | 12 ++++++++----
 3 files changed, 30 insertions(+), 18 deletions(-)
net/llc/af_llc.c +20 -14
index 789e66b0187a..2a859f967c8a 100644
@@ -111,22 +111,26 @@ static inline u8 llc_ui_header_len(struct sock *sk, struct sockaddr_llc *addr)
  *
  *	Send data via reliable llc2 connection.
  *	Returns 0 upon success, non-zero if action did not succeed.
+ *
+ *	This function always consumes a reference to the skb.
  */
 static int llc_ui_send_data(struct sock* sk, struct sk_buff *skb, int noblock)
 {
 	struct llc_sock* llc = llc_sk(sk);
-	int rc = 0;
 
 	if (unlikely(llc_data_accept_state(llc->state) ||
 		     llc->remote_busy_flag ||
 		     llc->p_flag)) {
 		long timeout = sock_sndtimeo(sk, noblock);
+		int rc;
 
 		rc = llc_ui_wait_for_busy_core(sk, timeout);
+		if (rc) {
+			kfree_skb(skb);
+			return rc;
+		}
 	}
-	if (unlikely(!rc))
-		rc = llc_build_and_send_pkt(sk, skb);
-	return rc;
+	return llc_build_and_send_pkt(sk, skb);
 }
 
 static void llc_ui_sk_init(struct socket *sock, struct sock *sk)
@@ -896,7 +900,7 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	DECLARE_SOCKADDR(struct sockaddr_llc *, addr, msg->msg_name);
 	int flags = msg->msg_flags;
 	int noblock = flags & MSG_DONTWAIT;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
 	size_t size = 0;
 	int rc = -EINVAL, copied = 0, hdrlen;
 
@@ -905,10 +909,10 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	lock_sock(sk);
 	if (addr) {
 		if (msg->msg_namelen < sizeof(*addr))
-			goto release;
+			goto out;
 	} else {
 		if (llc_ui_addr_null(&llc->addr))
-			goto release;
+			goto out;
 		addr = &llc->addr;
 	}
 	/* must bind connection to sap if user hasn't done it. */
@@ -916,7 +920,7 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 		/* bind to sap with null dev, exclusive. */
 		rc = llc_ui_autobind(sock, addr);
 		if (rc)
-			goto release;
+			goto out;
 	}
 	hdrlen = llc->dev->hard_header_len + llc_ui_header_len(sk, addr);
 	size = hdrlen + len;
@@ -925,12 +929,12 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	copied = size - hdrlen;
 	rc = -EINVAL;
 	if (copied < 0)
-		goto release;
+		goto out;
 	release_sock(sk);
 	skb = sock_alloc_send_skb(sk, size, noblock, &rc);
 	lock_sock(sk);
 	if (!skb)
-		goto release;
+		goto out;
 	skb->dev      = llc->dev;
 	skb->protocol = llc_proto_type(addr->sllc_arphrd);
 	skb_reserve(skb, hdrlen);
@@ -940,29 +944,31 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	if (sk->sk_type == SOCK_DGRAM || addr->sllc_ua) {
 		llc_build_and_send_ui_pkt(llc->sap, skb, addr->sllc_mac,
 					  addr->sllc_sap);
+		skb = NULL;
 		goto out;
 	}
 	if (addr->sllc_test) {
 		llc_build_and_send_test_pkt(llc->sap, skb, addr->sllc_mac,
 					    addr->sllc_sap);
+		skb = NULL;
 		goto out;
 	}
 	if (addr->sllc_xid) {
 		llc_build_and_send_xid_pkt(llc->sap, skb, addr->sllc_mac,
 					   addr->sllc_sap);
+		skb = NULL;
 		goto out;
 	}
 	rc = -ENOPROTOOPT;
 	if (!(sk->sk_type == SOCK_STREAM && !addr->sllc_ua))
 		goto out;
 	rc = llc_ui_send_data(sk, skb, noblock);
+	skb = NULL;
 out:
-	if (rc) {
-		kfree_skb(skb);
-release:
+	kfree_skb(skb);
+	if (rc)
 		dprintk("%s: failed sending from %02X to %02X: %d\n",
 			__func__, llc->laddr.lsap, llc->daddr.lsap, rc);
-	}
 	release_sock(sk);
 	return rc ? : copied;
 }
net/llc/llc_conn.c +2 -0
index 94c78cc49d3e..2689e95471dc 100644
@@ -55,6 +55,8 @@ int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
  *	(executing it's actions and changing state), upper layer will be
  *	indicated or confirmed, if needed. Returns 0 for success, 1 for
  *	failure. The socket lock has to be held before calling this function.
+ *
+ *	This function always consumes a reference to the skb.
  */
 int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 {
net/llc/llc_if.c +8 -4
index 6daf391b3e84..fc4d2bd8816f 100644
@@ -38,6 +38,8 @@
  *	closed and -EBUSY when sending data is not permitted in this state or
  *	LLC has send an I pdu with p bit set to 1 and is waiting for it's
  *	response.
+ *
+ *	This function always consumes a reference to the skb.
  */
 int llc_build_and_send_pkt(struct sock *sk, struct sk_buff *skb)
 {
@@ -46,20 +48,22 @@ int llc_build_and_send_pkt(struct sock *sk, struct sk_buff *skb)
 	struct llc_sock *llc = llc_sk(sk);
 
 	if (unlikely(llc->state == LLC_CONN_STATE_ADM))
-		goto out;
+		goto out_free;
 	rc = -EBUSY;
 	if (unlikely(llc_data_accept_state(llc->state) || /* data_conn_refuse */
 		     llc->p_flag)) {
 		llc->failed_data_req = 1;
-		goto out;
+		goto out_free;
 	}
 	ev = llc_conn_ev(skb);
 	ev->type      = LLC_CONN_EV_TYPE_PRIM;
 	ev->prim      = LLC_DATA_PRIM;
 	ev->prim_type = LLC_PRIM_TYPE_REQ;
 	skb->dev      = llc->dev;
-	rc = llc_conn_state_process(sk, skb);
-out:
+	return llc_conn_state_process(sk, skb);
+
+out_free:
+	kfree_skb(skb);
 	return rc;
 }
 
Signature · 1 line
2.20.1
author maintainer
#177 lore raw

PATCH 217/251 drm/msm/dsi: Implement reset correctly

In reply to Sasha Levin

From: Jeffrey Hugo <[email protected]>

[ Upstream commit 78e31c42261779a01bc73472d0f65f15378e9de3 ]

On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation.

The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset.

wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous.

Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps.

Fixes a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc Hai Li <[email protected]>
Cc Rob Clark <[email protected]>
[seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS]
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +4 -2
index 6f240021705b..e49b414c012c 100644
@@ -33,6 +33,8 @@
 #include "sfpb.xml.h"
 #include "dsi_cfg.h"
 
+#define DSI_RESET_TOGGLE_DELAY_MS 20
+
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
@@ -909,7 +911,7 @@ static void dsi_sw_reset(struct msm_dsi_host *msm_host)
 	wmb(); /* clocks need to be enabled before reset */
 
 	dsi_write(msm_host, REG_DSI_RESET, 1);
-	wmb(); /* make sure reset happen */
+	msleep(DSI_RESET_TOGGLE_DELAY_MS); /* make sure reset happen */
 	dsi_write(msm_host, REG_DSI_RESET, 0);
 }
 
@@ -1288,7 +1290,7 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host)
 
 	/* dsi controller can only be reset while clocks are running */
 	dsi_write(msm_host, REG_DSI_RESET, 1);
-	wmb();	/* make sure reset happen */
+	msleep(DSI_RESET_TOGGLE_DELAY_MS); /* make sure reset happen */
 	dsi_write(msm_host, REG_DSI_RESET, 0);
 	wmb();	/* controller out of reset */
 	dsi_write(msm_host, REG_DSI_CTRL, data0);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#145 lore raw

PATCH 185/251 dmaengine: dw: platform: Switch to acpi_dma_controller_register()

In reply to Sasha Levin

From: Andy Shevchenko <[email protected]>

[ Upstream commit e7b8514e4d68bec21fc6385fa0a66797ddc34ac9 ]

There is a possibility to have registered ACPI DMA controller while it has been gone already.

To avoid the potential crash, move to non-managed acpi_dma_controller_register().

---
 drivers/dma/dw/platform.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/dma/dw/platform.c +12 -2
index 5bda0eb9f393..7536fe80bc33 100644
@@ -87,13 +87,20 @@ static void dw_dma_acpi_controller_register(struct dw_dma *dw)
 	dma_cap_set(DMA_SLAVE, info->dma_cap);
 	info->filter_fn = dw_dma_acpi_filter;
 
-	ret = devm_acpi_dma_controller_register(dev, acpi_dma_simple_xlate,
-						info);
+	ret = acpi_dma_controller_register(dev, acpi_dma_simple_xlate, info);
 	if (ret)
 		dev_err(dev, "could not register acpi_dma_controller\n");
 }
+
+static void dw_dma_acpi_controller_free(struct dw_dma *dw)
+{
+	struct device *dev = dw->dma.dev;
+
+	acpi_dma_controller_free(dev);
+}
 #else /* !CONFIG_ACPI */
 static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {}
+static inline void dw_dma_acpi_controller_free(struct dw_dma *dw) {}
 #endif /* !CONFIG_ACPI */
 
 #ifdef CONFIG_OF
@@ -226,6 +233,9 @@ static int dw_remove(struct platform_device *pdev)
 {
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
+	if (ACPI_HANDLE(&pdev->dev))
+		dw_dma_acpi_controller_free(chip->dw);
+
 	if (pdev->dev.of_node)
 		of_dma_controller_free(pdev->dev.of_node);
 
Signature · 1 line
2.20.1
author maintainer
#183 lore raw

PATCH 223/251 ioat: ioat_alloc_ring() failure handling.

In reply to Sasha Levin

From: "[email protected]" <[email protected]>

[ Upstream commit b0b5ce1010ffc50015eaec72b0028aaae3f526bb ]

If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring allocation must not proceed.

Until now, if the first call to dma_alloc_coherent() in ioat_alloc_ring() returned NULL, the processing could proceed, failing with NULL-pointer dereferencing further down the line.

---
 drivers/dma/ioat/dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/dma/ioat/dma.c +2 -1
index 49386ce04bf5..1389f0582e29 100644
@@ -394,10 +394,11 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 		descs->virt = dma_alloc_coherent(to_dev(ioat_chan),
 						 SZ_2M, &descs->hw, flags);
-		if (!descs->virt && (i > 0)) {
+		if (!descs->virt) {
 			int idx;
 
 			for (idx = 0; idx < i; idx++) {
+				descs = &ioat_chan->descs[idx];
 				dma_free_coherent(to_dev(ioat_chan), SZ_2M,
 						  descs->virt, descs->hw);
 				descs->virt = NULL;
Signature · 1 line
2.20.1
author maintainer
#156 lore raw

PATCH 196/251 ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init

In reply to Sasha Levin

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit e1aa1a1db3b01c9890e82cf065cee99962ba1ed9 ]

Fix following lockdep warning disabling bh in
ath_dynack_node_init/ath_dynack_node_deinit

[   75.955878] --------------------------------
[   75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.955905] {SOFTIRQ-ON-W} state was registered at:
[   75.955912]   lock_acquire+0x9a/0x160
[   75.955917]   _raw_spin_lock+0x2c/0x70
[   75.955927]   ath_dynack_node_init+0x2a/0x60 [ath9k_hw]
[   75.955934]   ath9k_sta_state+0xec/0x160 [ath9k]
[   75.955976]   drv_sta_state+0xb2/0x740 [mac80211]
[   75.956008]   sta_info_insert_finish+0x21a/0x420 [mac80211]
[   75.956039]   sta_info_insert_rcu+0x12b/0x2c0 [mac80211]
[   75.956069]   sta_info_insert+0x7/0x70 [mac80211]
[   75.956093]   ieee80211_prep_connection+0x42e/0x730 [mac80211]
[   75.956120]   ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211]
[   75.956152]   cfg80211_mlme_auth+0x143/0x350 [cfg80211]
[   75.956169]   nl80211_authenticate+0x25e/0x2b0 [cfg80211]
[   75.956172]   genl_family_rcv_msg+0x198/0x400
[   75.956174]   genl_rcv_msg+0x42/0x90
[   75.956176]   netlink_rcv_skb+0x35/0xf0
[   75.956178]   genl_rcv+0x1f/0x30
[   75.956180]   netlink_unicast+0x154/0x200
[   75.956182]   netlink_sendmsg+0x1bf/0x3d0
[   75.956186]   ___sys_sendmsg+0x2c2/0x2f0
[   75.956187]   __sys_sendmsg+0x44/0x80
[   75.956190]   do_syscall_64+0x55/0x1a0
[   75.956192]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   75.956194] irq event stamp: 2357092
[   75.956196] hardirqs last  enabled at (2357092): [<ffffffff818c62de>] _raw_spin_unlock_irqrestore+0x3e/0x50
[   75.956199] hardirqs last disabled at (2357091): [<ffffffff818c60b1>] _raw_spin_lock_irqsave+0x11/0x80
[   75.956202] softirqs last  enabled at (2357072): [<ffffffff8106dc09>] irq_enter+0x59/0x60
[   75.956204] softirqs last disabled at (2357073): [<ffffffff8106dcbe>] irq_exit+0xae/0xc0
[   75.956206]
               other info that might help us debug this:
[   75.956207]  Possible unsafe locking scenario:
[   75.956208]        CPU0
[   75.956209]        ----
[   75.956210]   lock(&(&da->qlock)->rlock);
[   75.956213]   <Interrupt>
[   75.956214]     lock(&(&da->qlock)->rlock);
[   75.956216]
                *** DEADLOCK ***
[   75.956217] 1 lock held by swapper/0/0:
[   75.956219]  #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k]
[   75.956225]
               stack backtrace:
[   75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13
[   75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
[   75.956231] Call Trace:
[   75.956233]  <IRQ>
[   75.956236]  dump_stack+0x67/0x90
[   75.956239]  mark_lock+0x4c1/0x640
[   75.956242]  ? check_usage_backwards+0x130/0x130
[   75.956245]  ? sched_clock_local+0x12/0x80
[   75.956247]  __lock_acquire+0x484/0x7a0
[   75.956250]  ? __lock_acquire+0x3b9/0x7a0
[   75.956252]  lock_acquire+0x9a/0x160
[   75.956259]  ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956262]  _raw_spin_lock_bh+0x34/0x80
[   75.956268]  ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956275]  ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956280]  ath_rx_tasklet+0xd09/0xe90 [ath9k]
[   75.956286]  ath9k_tasklet+0x102/0x240 [ath9k]
[   75.956288]  tasklet_action_common.isra.0+0x6d/0x170
[   75.956291]  __do_softirq+0xcc/0x425
[   75.956294]  irq_exit+0xae/0xc0
[   75.956296]  do_IRQ+0x8a/0x110
[   75.956298]  common_interrupt+0xf/0xf
[   75.956300]  </IRQ>
[   75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400
[   75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7
[   75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000
[   75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800
[   75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000
[   75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[   75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800
[   75.956321]  cpuidle_enter+0x24/0x40
[   75.956323]  do_idle+0x1ac/0x220
[   75.956326]  cpu_startup_entry+0x14/0x20
[   75.956329]  start_kernel+0x482/0x489
[   75.956332]  secondary_startup_64+0xa4/0xb0
Fixes c774d57fd47c ("ath9k: add dynamic ACK timeout estimation")
---
 drivers/net/wireless/ath/ath9k/dynack.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath9k/dynack.c +4 -4
index 6e236a485431..71b4888b30e7 100644
@@ -300,9 +300,9 @@ void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
 
 	an->ackto = ackto;
 
-	spin_lock(&da->qlock);
+	spin_lock_bh(&da->qlock);
 	list_add_tail(&an->list, &da->nodes);
-	spin_unlock(&da->qlock);
+	spin_unlock_bh(&da->qlock);
 }
 EXPORT_SYMBOL(ath_dynack_node_init);
 
@@ -316,9 +316,9 @@ void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an)
 {
 	struct ath_dynack *da = &ah->dynack;
 
-	spin_lock(&da->qlock);
+	spin_lock_bh(&da->qlock);
 	list_del(&an->list);
-	spin_unlock(&da->qlock);
+	spin_unlock_bh(&da->qlock);
 }
 EXPORT_SYMBOL(ath_dynack_node_deinit);
 
Signature · 1 line
2.20.1
author maintainer
#192 lore raw

PATCH 232/251 clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume

In reply to Sasha Levin

From: Marian Mihailescu <[email protected]>

[ Upstream commit e21be0d1d7bd7f78a77613f6bcb6965e72b22fc1 ]

Save and restore top PLL related configuration registers for big (APLL) and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks were reset to default values after suspend/resume cycle and performance after system resume was affected when performance governor has been selected.

Fixes 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list")
---
 drivers/clk/samsung/clk-exynos5420.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/samsung/clk-exynos5420.c +2 -0
index 2bb88d125113..7f8c7cf3c2ab 100644
@@ -170,6 +170,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
 	GATE_BUS_CPU,
 	GATE_SCLK_CPU,
 	CLKOUT_CMU_CPU,
+	APLL_CON0,
+	KPLL_CON0,
 	CPLL_CON0,
 	DPLL_CON0,
 	EPLL_CON0,
Signature · 1 line
2.20.1
author maintainer
#153 lore raw

PATCH 193/251 staging: greybus: light: fix a couple double frees

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 329101244f214952606359d254ae883b7109e1a5 ]

The problem is in gb_lights_request_handler(). If we get a request to change the config then we release the light with gb_lights_light_release() and re-allocated it. However, if the allocation fails part way through then we call gb_lights_light_release() again. This can lead to a couple different double frees where we haven't cleared out the original values:

	gb_lights_light_v4l2_unregister(light);
	...
	kfree(light->channels);
	kfree(light->name);

I also made a small change to how we set "light->channels_count = 0;". The original code handled this part fine and did not cause a use after free but it was sort of complicated to read.

---
 drivers/staging/greybus/light.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/staging/greybus/light.c +6 -6
index 9f01427f35f9..1cb82cc28aa7 100644
@@ -1102,21 +1102,21 @@ static void gb_lights_channel_release(struct gb_channel *channel)
 static void gb_lights_light_release(struct gb_light *light)
 {
 	int i;
-	int count;
 
 	light->ready = false;
 
-	count = light->channels_count;
-
 	if (light->has_flash)
 		gb_lights_light_v4l2_unregister(light);
+	light->has_flash = false;
 
-	for (i = 0; i < count; i++) {
+	for (i = 0; i < light->channels_count; i++)
 		gb_lights_channel_release(&light->channels[i]);
-		light->channels_count--;
-	}
+	light->channels_count = 0;
+
 	kfree(light->channels);
+	light->channels = NULL;
 	kfree(light->name);
+	light->name = NULL;
 }
 
 static void gb_lights_release(struct gb_lights *glights)
Signature · 1 line
2.20.1
author maintainer
#157 lore raw

PATCH 197/251 net: sonic: return NETDEV_TX_OK if failed to map buffer

In reply to Sasha Levin

From: Mao Wenan <[email protected]>

[ Upstream commit 6e1cdedcf0362fed3aedfe051d46bd7ee2a85fe1 ]

NETDEV_TX_BUSY really should only be used by drivers that call netif_tx_stop_queue() at the wrong moment. If dma_map_single() is failed to map tx DMA buffer, it might trigger an infinite loop. This patch use NETDEV_TX_OK instead of NETDEV_TX_BUSY, and change printk to pr_err_ratelimited.

Fixes d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers")
---
 drivers/net/ethernet/natsemi/sonic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/natsemi/sonic.c +2 -2
index 23821540ab07..11f472fd5d47 100644
@@ -221,9 +221,9 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 	laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE);
 	if (!laddr) {
-		printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name);
+		pr_err_ratelimited("%s: failed to map tx DMA buffer.\n", dev->name);
 		dev_kfree_skb(skb);
-		return NETDEV_TX_BUSY;
+		return NETDEV_TX_OK;
 	}
 
 	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
Signature · 1 line
2.20.1
author maintainer
#167 lore raw

PATCH 207/251 net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 231042181dc9d6122c6faba64e99ccb25f13cc6c ]

The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered.

Fixes b1c17215d718 ("stmmac: add ipq806x glue layer")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +1 -1
index 866444b6c82f..11a4a81b0397 100644
@@ -203,7 +203,7 @@ static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
 	struct device *dev = &gmac->pdev->dev;
 
 	gmac->phy_mode = of_get_phy_mode(dev->of_node);
-	if (gmac->phy_mode < 0) {
+	if ((int)gmac->phy_mode < 0) {
 		dev_err(dev, "missing phy mode property\n");
 		return -EINVAL;
 	}
Signature · 1 line
2.20.1
author maintainer
#168 lore raw

PATCH 208/251 ipv6: Handle race in addrconf_dad_work

In reply to Sasha Levin

From: David Ahern <[email protected]>

[ Upstream commit a3ce2a21bb8969ae27917281244fa91bf5f286d7 ]

Rajendra reported a kernel panic when a link was taken down:

[ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290

<snip>

[ 6870.570501] Call Trace:
[ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40
[ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0
[ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260
[ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430
[ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430
[ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490
[ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430
[ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0
[ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60
[ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70
[ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0

addrconf_dad_work is kicked to be scheduled when a device is brought up. There is a race between addrcond_dad_work getting scheduled and taking the rtnl lock and a process taking the link down (under rtnl). The latter removes the host route from the inet6_addr as part of addrconf_ifdown which is run for NETDEV_DOWN. The former attempts to use the host route in ipv6_ifa_notify. If the down event removes the host route due to the race to the rtnl, then the BUG listed above occurs.

This scenario does not occur when the ipv6 address is not kept (net.ipv6.conf.all.keep_addr_on_down = 0) as addrconf_ifdown sets the state of the ifp to DEAD. Handle when the addresses are kept by checking IF_READY which is reset by addrconf_ifdown.

The 'dead' flag for an inet6_addr is set only under rtnl, in addrconf_ifdown and it means the device is getting removed (or IPv6 is disabled). The interesting cases for changing the idev flag are addrconf_notify (NETDEV_UP and NETDEV_CHANGE) and addrconf_ifdown (reset the flag). The former does not have the idev lock - only rtnl; the latter has both. Based on that the existing dead + IF_READY check can be moved to right after the rtnl_lock in addrconf_dad_work.

Fixes f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional")
---
 net/ipv6/addrconf.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
net/ipv6/addrconf.c +6 -5
index 6b1310d5e808..61fd8ff922d9 100644
@@ -3859,6 +3859,12 @@ static void addrconf_dad_work(struct work_struct *w)
 
 	rtnl_lock();
 
+	/* check if device was taken down before this delayed work
+	 * function could be canceled
+	 */
+	if (idev->dead || !(idev->if_flags & IF_READY))
+		goto out;
+
 	spin_lock_bh(&ifp->lock);
 	if (ifp->state == INET6_IFADDR_STATE_PREDAD) {
 		action = DAD_BEGIN;
@@ -3902,11 +3908,6 @@ static void addrconf_dad_work(struct work_struct *w)
 		goto out;
 
 	write_lock_bh(&idev->lock);
-	if (idev->dead || !(idev->if_flags & IF_READY)) {
-		write_unlock_bh(&idev->lock);
-		goto out;
-	}
-
 	spin_lock(&ifp->lock);
 	if (ifp->state == INET6_IFADDR_STATE_DEAD) {
 		spin_unlock(&ifp->lock);
Signature · 1 line
2.20.1
author maintainer
#170 lore raw

PATCH 210/251 net: stmmac: gmac4+: Not all Unicast addresses may be available

In reply to Sasha Levin

From: Jose Abreu <[email protected]>

[ Upstream commit 25683bab09a70542b9f8e3e28f79b3369e56701f ]

Some setups may not have all Unicast addresses filters available. Check the number of available filters before trying to setup it.

Fixes 477286b53f55 ("stmmac: add GMAC4 core support")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +1 -1
index f46f2bfc2cc0..4216c0a5eaf5 100644
@@ -168,7 +168,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 	}
 
 	/* Handle multiple unicast addresses */
-	if (netdev_uc_count(dev) > GMAC_MAX_PERFECT_ADDRESSES) {
+	if (netdev_uc_count(dev) > hw->unicast_filter_entries) {
 		/* Switch to promiscuous mode if more than 128 addrs
 		 * are required
 		 */
Signature · 1 line
2.20.1
author maintainer
#199 lore raw

PATCH 239/251 packet: fix data-race in fanout_flow_is_huge()

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit b756ad928d98e5ef0b74af7546a6a31a8dadde00 ]

KCSAN reported the following data-race [1]

Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it.

Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value.

[1]

BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover

read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1:

 fanout_flow_is_huge net/packet/af_packet.c:1303 [inline]
 fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353
 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453
 deliver_skb net/core/dev.c:1888 [inline]
 dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958
 xmit_one net/core/dev.c:3195 [inline]
 dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215
 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179
 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795
 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173
 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471
 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657
 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311
 __sys_sendmmsg+0x123/0x350 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0:

 fanout_flow_is_huge net/packet/af_packet.c:1306 [inline]
 fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353
 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453
 deliver_skb net/core/dev.c:1888 [inline]
 dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958
 xmit_one net/core/dev.c:3195 [inline]
 dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215
 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179
 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795
 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173
 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471
 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657
 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311
 __sys_sendmmsg+0x123/0x350 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes 3b3a5b0aab5b ("packet: rollover huge flows before small flows")
Cc Willem de Bruijn <[email protected]>
---
 net/packet/af_packet.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
net/packet/af_packet.c +9 -3
index 47a862cc7b34..fb643945e424 100644
@@ -1332,15 +1332,21 @@ static void packet_sock_destruct(struct sock *sk)
 
 static bool fanout_flow_is_huge(struct packet_sock *po, struct sk_buff *skb)
 {
-	u32 rxhash;
+	u32 *history = po->rollover->history;
+	u32 victim, rxhash;
 	int i, count = 0;
 
 	rxhash = skb_get_hash(skb);
 	for (i = 0; i < ROLLOVER_HLEN; i++)
-		if (po->rollover->history[i] == rxhash)
+		if (READ_ONCE(history[i]) == rxhash)
 			count++;
 
-	po->rollover->history[prandom_u32() % ROLLOVER_HLEN] = rxhash;
+	victim = prandom_u32() % ROLLOVER_HLEN;
+
+	/* Avoid dirtying the cache line if possible */
+	if (READ_ONCE(history[victim]) != rxhash)
+		WRITE_ONCE(history[victim], rxhash);
+
 	return count > (ROLLOVER_HLEN >> 1);
 }
 
Signature · 1 line
2.20.1
author maintainer
#198 lore raw

PATCH 238/251 f2fs: fix potential overflow

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit a9af3fdcc4258af406879eca63d82e9d6baa892e ]

In build_sit_entries(), if valid_blocks in SIT block is smaller than valid_blocks in journal, for below calculation:

sbi->discard_blks += old_valid_blocks - se->valid_blocks;

There will be two times potential overflow:
- old_valid_blocks - se->valid_blocks will overflow, and be a very large number.
- sbi->discard_blks += result will overflow again, comes out a correct result accidently.

Anyway, it should be fixed.

Fixes d600af236da5 ("f2fs: avoid unneeded loop in build_sit_entries")
Fixes 1f43e2ad7bff ("f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard")
---
 fs/f2fs/data.c | 2 +-
 fs/f2fs/file.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
fs/f2fs/data.c +1 -1
index 0206c8c20784..b2cccd4083b8 100644
@@ -1267,7 +1267,7 @@ static int f2fs_write_data_page(struct page *page,
 	loff_t i_size = i_size_read(inode);
 	const pgoff_t end_index = ((unsigned long long) i_size)
 							>> PAGE_SHIFT;
-	loff_t psize = (page->index + 1) << PAGE_SHIFT;
+	loff_t psize = (loff_t)(page->index + 1) << PAGE_SHIFT;
 	unsigned offset = 0;
 	bool need_balance_fs = false;
 	int err = 0;
fs/f2fs/file.c +1 -1
index f46ac1651bd5..e3c438c8b8ce 100644
@@ -980,7 +980,7 @@ static int __clone_blkaddrs(struct inode *src_inode, struct inode *dst_inode,
 				}
 				dn.ofs_in_node++;
 				i++;
-				new_size = (dst + i) << PAGE_SHIFT;
+				new_size = (loff_t)(dst + i) << PAGE_SHIFT;
 				if (dst_inode->i_size < new_size)
 					f2fs_i_size_write(dst_inode, new_size);
 			} while (--ilen && (do_replace[i] || blkaddr[i] == NULL_ADDR));
Signature · 8 lines
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#204 lore raw

PATCH 244/251 scsi: bnx2i: fix potential use after free

In reply to Sasha Levin

From: Pan Bian <[email protected]>

[ Upstream commit 29d28f2b8d3736ac61c28ef7e20fda63795b74d9 ]

The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues.

Fixes a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr")
---
 drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/bnx2i/bnx2i_iscsi.c +1 -1
index 133901fd3e35..6d1f8b22bd83 100644
@@ -915,12 +915,12 @@ void bnx2i_free_hba(struct bnx2i_hba *hba)
 	INIT_LIST_HEAD(&hba->ep_ofld_list);
 	INIT_LIST_HEAD(&hba->ep_active_list);
 	INIT_LIST_HEAD(&hba->ep_destroy_list);
-	pci_dev_put(hba->pcidev);
 
 	if (hba->regview) {
 		pci_iounmap(hba->pcidev, hba->regview);
 		hba->regview = NULL;
 	}
+	pci_dev_put(hba->pcidev);
 	bnx2i_free_mp_bdt(hba);
 	bnx2i_release_free_cid_que(hba);
 	iscsi_host_free(shost);
Signature · 1 line
2.20.1
author maintainer
#208 lore raw

PATCH 248/251 drm/radeon: fix bad DMA from INTERRUPT_CNTL2

In reply to Sasha Levin

From: Sam Bobroff <[email protected]>

[ Upstream commit 62d91dd2851e8ae2ca552f1b090a3575a4edf759 ]

The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always be safe.

Fixes d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
---
 drivers/gpu/drm/radeon/cik.c  | 4 ++--
 drivers/gpu/drm/radeon/r600.c | 4 ++--
 drivers/gpu/drm/radeon/si.c   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)
drivers/gpu/drm/radeon/cik.c +2 -2
index b99f3e59011c..5fcb5869a489 100644
@@ -7026,8 +7026,8 @@ static int cik_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* XXX this should actually be a bus address, not an MC address. same on older asics */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
drivers/gpu/drm/radeon/r600.c +2 -2
index f2eac6b6c46a..9569c35f8766 100644
@@ -3697,8 +3697,8 @@ int r600_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
drivers/gpu/drm/radeon/si.c +2 -2
index b75d809c292e..919d389869ce 100644
@@ -6018,8 +6018,8 @@ static int si_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#175 lore raw

PATCH 215/251 act_mirred: Fix mirred_init_module error handling

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 11c9a7d38af524217efb7a176ad322b97ac2f163 ]

If tcf_register_action failed, mirred_device_notifier should be unregistered.

Fixes 3b87956ea645 ("net sched: fix race in mirred device removal")
---
 net/sched/act_mirred.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/sched/act_mirred.c +5 -1
index fc3650b06192..9b4c7c42c932 100644
@@ -332,7 +332,11 @@ static int __init mirred_init_module(void)
 		return err;
 
 	pr_info("Mirror/redirect action on\n");
-	return tcf_register_action(&act_mirred_ops, &mirred_net_ops);
+	err = tcf_register_action(&act_mirred_ops, &mirred_net_ops);
+	if (err)
+		unregister_netdevice_notifier(&mirred_device_notifier);
+
+	return err;
 }
 
 static void __exit mirred_cleanup_module(void)
Signature · 1 line
2.20.1
author maintainer
#207 lore raw

PATCH 247/251 dmaengine: ti: edma: fix missed failure handling

In reply to Sasha Levin

From: Chuhong Yuan <[email protected]>

[ Upstream commit 340049d453682a9fe8d91fe794dd091730f4bb25 ]

When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it.

Fixes 1be5336bc7ba ("dmaengine: edma: New device tree binding")
---
 drivers/dma/edma.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/dma/edma.c +4 -2
index 72f31e837b1d..56ec72468745 100644
@@ -2340,8 +2340,10 @@ static int edma_probe(struct platform_device *pdev)
 
 		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
 					    sizeof(*ecc->tc_list), GFP_KERNEL);
-		if (!ecc->tc_list)
-			return -ENOMEM;
+		if (!ecc->tc_list) {
+			ret = -ENOMEM;
+			goto err_reg1;
+		}
 
 		for (i = 0;; i++) {
 			ret = of_parse_phandle_with_fixed_args(node, "ti,tptcs",
Signature · 1 line
2.20.1
author maintainer
#184 lore raw

PATCH 224/251 mt7601u: fix bbp version check in mt7601u_wait_bbp_ready

In reply to Sasha Levin

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 ]

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by coverity with the following error:

Logical vs. bitwise operator
The expression's value does not depend on the operands; inadvertent use of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator")

Fixes c869f77d6abb ("add mt7601u driver")
---
 drivers/net/wireless/mediatek/mt7601u/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt7601u/phy.c +1 -1
index ca09a5d4305e..71a47459bf8a 100644
@@ -221,7 +221,7 @@ int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
 
 	do {
 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
-		if (val && ~val)
+		if (val && val != 0xff)
 			break;
 	} while (--i);
 
Signature · 1 line
2.20.1
author maintainer
#186 lore raw

PATCH 226/251 media: ov6650: Fix some format attributes not under control

In reply to Sasha Levin

From: Janusz Krzysztofik <[email protected]>

[ Upstream commit 1c6a2b63095154bbf9e8f38d79487a728331bf65 ]

User arguments passed to .get/set_fmt() pad operation callbacks may contain unsupported values. The driver takes control over frame size and pixel code as well as colorspace and field attributes but has never cared for remainig format attributes, i.e., ycbcr_enc, quantization and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support"). Fix it.

Set up a static v4l2_mbus_framefmt structure with attributes initialized to reasonable defaults and use it for updating content of user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE, postpone frame size update, now performed from inside ov6650_s_fmt() helper, util the user argument is first updated in ov6650_set_fmt() with default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy all attributes to pad config, only those handled by the driver, then fill the response with the default frame format updated with resulting pad config format code and frame size.

Fixes 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
---
 drivers/media/i2c/soc_camera/ov6650.c | 51 ++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 12 deletions(-)
drivers/media/i2c/soc_camera/ov6650.c +39 -12
index e9271ad9ee4c..3b118d45d433 100644
@@ -215,6 +215,17 @@ static u32 ov6650_codes[] = {
 	MEDIA_BUS_FMT_Y8_1X8,
 };
 
+static const struct v4l2_mbus_framefmt ov6650_def_fmt = {
+	.width		= W_CIF,
+	.height		= H_CIF,
+	.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
+	.colorspace	= V4L2_COLORSPACE_SRGB,
+	.field		= V4L2_FIELD_NONE,
+	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
+	.quantization	= V4L2_QUANTIZATION_DEFAULT,
+	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
+};
+
 /* read a register */
 static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
 {
@@ -511,11 +522,13 @@ static int ov6650_get_fmt(struct v4l2_subdev *sd,
 	if (format->pad)
 		return -EINVAL;
 
+	/* initialize response with default media bus frame format */
+	*mf = ov6650_def_fmt;
+
+	/* update media bus format code and frame size */
 	mf->width	= priv->rect.width >> priv->half_scale;
 	mf->height	= priv->rect.height >> priv->half_scale;
 	mf->code	= priv->code;
-	mf->colorspace	= V4L2_COLORSPACE_SRGB;
-	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
 }
@@ -678,10 +691,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 	if (!ret)
 		priv->code = code;
 
-	if (!ret) {
-		mf->width = priv->rect.width >> half_scale;
-		mf->height = priv->rect.height >> half_scale;
-	}
 	return ret;
 }
 
@@ -700,9 +709,6 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
 		v4l_bound_align_image(&mf->width, 2, W_CIF, 1,
 				&mf->height, 2, H_CIF, 1, 0);
 
-	mf->field = V4L2_FIELD_NONE;
-	mf->colorspace = V4L2_COLORSPACE_SRGB;
-
 	switch (mf->code) {
 	case MEDIA_BUS_FMT_Y10_1X10:
 		mf->code = MEDIA_BUS_FMT_Y8_1X8;
@@ -718,10 +724,31 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
 		break;
 	}
 
-	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		return ov6650_s_fmt(sd, mf);
-	cfg->try_fmt = *mf;
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		/* store media bus format code and frame size in pad config */
+		cfg->try_fmt.width = mf->width;
+		cfg->try_fmt.height = mf->height;
+		cfg->try_fmt.code = mf->code;
 
+		/* return default mbus frame format updated with pad config */
+		*mf = ov6650_def_fmt;
+		mf->width = cfg->try_fmt.width;
+		mf->height = cfg->try_fmt.height;
+		mf->code = cfg->try_fmt.code;
+
+	} else {
+		/* apply new media bus format code and frame size */
+		int ret = ov6650_s_fmt(sd, mf);
+
+		if (ret)
+			return ret;
+
+		/* return default format updated with active size and code */
+		*mf = ov6650_def_fmt;
+		mf->width = priv->rect.width >> priv->half_scale;
+		mf->height = priv->rect.height >> priv->half_scale;
+		mf->code = priv->code;
+	}
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#190 lore raw

PATCH 230/251 rtlwifi: Remove unnecessary NULL check in rtl_regd_init

In reply to Sasha Levin

From: Nathan Chancellor <[email protected]>

[ Upstream commit 091c6e9c083f7ebaff00b37ad13562d51464d175 ]

When building with Clang + -Wtautological-pointer-compare:

drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison of address of 'rtlpriv->regd' equal to a null pointer is always false [-Wtautological-pointer-compare]

        if (wiphy == NULL || &rtlpriv->regd == NULL)
                              ~~~~~~~~~^~~~    ~~~~

1 warning generated.

The address of an array member is never NULL unless it is the first struct member so remove the unnecessary check. This was addressed in the staging version of the driver in commit f986978b32b3 ("Staging:
rtlwifi: remove unnecessary NULL check").

While we are here, fix the following checkpatch warning:

CHECK: Comparison to NULL could be written "!wiphy" 35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389:
+ if (wiphy == NULL)

---
 drivers/net/wireless/realtek/rtlwifi/regd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/realtek/rtlwifi/regd.c +1 -1
index 6ee6bf8e7eaf..ab53cf42cf42 100644
@@ -427,7 +427,7 @@ int rtl_regd_init(struct ieee80211_hw *hw,
 	struct wiphy *wiphy = hw->wiphy;
 	struct country_code_to_enum_rd *country = NULL;
 
-	if (wiphy == NULL || &rtlpriv->regd == NULL)
+	if (!wiphy)
 		return -EINVAL;
 
 	/* init country_code from efuse channel plan */
Signature · 1 line
2.20.1
author maintainer
#155 lore raw

PATCH 195/251 iio: dac: ad5380: fix incorrect assignment to val

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit b1e18768ef1214c0a8048327918a182cabe09f9d ]

Currently the pointer val is being incorrectly incremented instead of the value pointed to by val. Fix this by adding in the missing * indirection operator.

Addresses-Coverity: ("Unused value")

Fixes c03f2c536818 ("staging:iio:dac: Add AD5380 driver")
---
 drivers/iio/dac/ad5380.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/dac/ad5380.c +1 -1
index 97d2c5111f43..8bf7fc626a9d 100644
@@ -221,7 +221,7 @@ static int ad5380_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 		*val >>= chan->scan_type.shift;
-		val -= (1 << chan->scan_type.realbits) / 2;
+		*val -= (1 << chan->scan_type.realbits) / 2;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 2 * st->vref;
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 82/251 ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 8d1667200850f8753c0265fa4bd25c9a6e5f94ce ]

The apq8016 driver leaves the of-node refcount at aborting from the loop of for_each_child_of_node() in the error path. Not only the iterator node of for_each_child_of_node(), the children nodes referred from it for codec and cpu have to be properly unreferenced.

Fixes bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support")
Cc Patrick Lai <[email protected]>
Cc Banajit Goswami <[email protected]>
---
 sound/soc/qcom/apq8016_sbc.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)
sound/soc/qcom/apq8016_sbc.c +16 -5
index 07f91e918b23..754742018515 100644
@@ -114,13 +114,15 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 
 		if (!cpu || !codec) {
 			dev_err(dev, "Can't find cpu/codec DT node\n");
-			return ERR_PTR(-EINVAL);
+			ret = -EINVAL;
+			goto error;
 		}
 
 		link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0);
 		if (!link->cpu_of_node) {
 			dev_err(card->dev, "error getting cpu phandle\n");
-			return ERR_PTR(-EINVAL);
+			ret = -EINVAL;
+			goto error;
 		}
 
 		link->codec_of_node = of_parse_phandle(codec, "sound-dai", 0);
@@ -132,28 +134,37 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 		ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name);
 		if (ret) {
 			dev_err(card->dev, "error getting cpu dai name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		ret = snd_soc_of_get_dai_name(codec, &link->codec_dai_name);
 		if (ret) {
 			dev_err(card->dev, "error getting codec dai name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		link->platform_of_node = link->cpu_of_node;
 		ret = of_property_read_string(np, "link-name", &link->name);
 		if (ret) {
 			dev_err(card->dev, "error getting codec dai_link name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		link->stream_name = link->name;
 		link->init = apq8016_sbc_dai_init;
 		link++;
+
+		of_node_put(cpu);
+		of_node_put(codec);
 	}
 
 	return data;
+
+ error:
+	of_node_put(np);
+	of_node_put(cpu);
+	of_node_put(codec);
+	return ERR_PTR(ret);
 }
 
 static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
author maintainer
#196 lore raw

PATCH 236/251 net: neigh: use long type to store jiffies delta

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit 9d027e3a83f39b819e908e4e09084277a2e45e95 ]

A difference of two unsigned long needs long storage.

Fixes c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
---
 net/core/neighbour.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/core/neighbour.c +2 -2
index cd85cee14bd0..6578d1f8e6c4 100644
@@ -1834,8 +1834,8 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
 		goto nla_put_failure;
 	{
 		unsigned long now = jiffies;
-		unsigned int flush_delta = now - tbl->last_flush;
-		unsigned int rand_delta = now - tbl->last_rand;
+		long flush_delta = now - tbl->last_flush;
+		long rand_delta = now - tbl->last_rand;
 		struct neigh_hash_table *nht;
 		struct ndt_config ndc = {
 			.ndtc_key_len		= tbl->key_len,
Signature · 1 line
2.20.1
author maintainer
#211 lore raw

PATCH 251/251 IB/iser: Fix dma_nents type definition

In reply to Sasha Levin

From: Max Gurtovoy <[email protected]>

[ Upstream commit c1545f1a200f4adc4ef8dd534bf33e2f1aa22c2f ]

The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid future mismatch between types, define dma_nents as an integer instead of unsigned.

Fixes 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL")
---
 drivers/infiniband/ulp/iser/iscsi_iser.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/ulp/iser/iscsi_iser.h +1 -1
index cb48e22afff7..a3614f7f0007 100644
@@ -197,7 +197,7 @@ struct iser_data_buf {
 	struct scatterlist *sg;
 	int                size;
 	unsigned long      data_len;
-	unsigned int       dma_nents;
+	int                dma_nents;
 };
 
 /* fwd declarations */
Signature · 1 line
2.20.1
author maintainer
#210 lore raw

PATCH 250/251 powerpc/archrandom: fix arch_get_random_seed_int()

In reply to Sasha Levin

From: Ard Biesheuvel <[email protected]>

[ Upstream commit b6afd1234cf93aa0d71b4be4788c47534905f0be ]

Commit 01c9348c7620ec65

powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*

updated arch_get_random_[int|long]() to be NOPs, and moved the hardware RNG backing to arch_get_random_seed_[int|long]() instead. However, it failed to take into account that arch_get_random_int() was implemented in terms of arch_get_random_long(), and so we ended up with a version of the former that is essentially a NOP as well.

Fix this by calling arch_get_random_seed_long() from arch_get_random_seed_int() instead.

Fixes 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*")
---
 arch/powerpc/include/asm/archrandom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/include/asm/archrandom.h +1 -1
index 85e88f7a59c0..9ff848e3c4a6 100644
@@ -27,7 +27,7 @@ static inline int arch_get_random_seed_int(unsigned int *v)
 	unsigned long val;
 	int rc;
 
-	rc = arch_get_random_long(&val);
+	rc = arch_get_random_seed_long(&val);
 	if (rc)
 		*v = val;
 
Signature · 1 line
2.20.1
author maintainer
#81 lore raw

PATCH 122/251 ALSA: usb-audio: Handle the error from snd_usb_mixer_apply_create_quirk()

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 328e9f6973be2ee67862cb17bf6c0c5c5918cd72 ]

The error from snd_usb_mixer_apply_create_quirk() is ignored in the current usb-audio driver code, which will continue the probing even after the error. Let's take it more serious.

Fixes 7b1eda223deb ("ALSA: usb-mixer: factor out quirks")
---
 sound/usb/mixer.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
sound/usb/mixer.c +3 -1
index 64fa1bbf0acb..54011f8543a7 100644
@@ -2626,7 +2626,9 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
 	    (err = snd_usb_mixer_status_create(mixer)) < 0)
 		goto _error;
 
-	snd_usb_mixer_apply_create_quirk(mixer);
+	err = snd_usb_mixer_apply_create_quirk(mixer);
+	if (err < 0)
+		goto _error;
 
 	err = snd_device_new(chip->card, SNDRV_DEV_CODEC, mixer, &dev_ops);
 	if (err < 0)
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
author maintainer
#83 lore raw

PATCH 124/251 ASoC: fix valid stream condition

In reply to Sasha Levin

From: Jerome Brunet <[email protected]>

[ Upstream commit 6a7c59c6d9f3b280e81d7a04bbe4e55e90152dce ]

A stream may specify a rate range using 'rate_min' and 'rate_max', so a stream may be valid and not specify any rates. However, as stream cannot be valid and not have any channel. Let's use this condition instead to determine if a stream is valid or not.

Fixes cde79035c6cf ("ASoC: Handle multiple codecs with split playback / capture")
---
 sound/soc/soc-pcm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/soc-pcm.c +2 -2
index d69559e45872..635b22fa1101 100644
@@ -48,8 +48,8 @@ static bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream)
 	else
 		codec_stream = &dai->driver->capture;
 
-	/* If the codec specifies any rate at all, it supports the stream. */
-	return codec_stream->rates;
+	/* If the codec specifies any channels at all, it supports the stream */
+	return codec_stream->channels_min;
 }
 
 /**
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
author maintainer
#140 lore raw

PATCH 180/251 ASoC: es8328: Fix copy-paste error in es8328_right_line_controls

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 630742c296341a8cfe00dfd941392025ba8dd4e8 ]

It seems 'es8328_rline_enum' should be used
in es8328_right_line_controls

Fixes 567e4f98922c ("ASoC: add es8328 codec driver")
---
 sound/soc/codecs/es8328.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/es8328.c +1 -1
index 37722194b107..6b22700842e2 100644
@@ -234,7 +234,7 @@ static const struct soc_enum es8328_rline_enum =
 			      ARRAY_SIZE(es8328_line_texts),
 			      es8328_line_texts);
 static const struct snd_kcontrol_new es8328_right_line_controls =
-	SOC_DAPM_ENUM("Route", es8328_lline_enum);
+	SOC_DAPM_ENUM("Route", es8328_rline_enum);
 
 /* Left Mixer */
 static const struct snd_kcontrol_new es8328_left_mixer_controls[] = {
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
author maintainer
#194 lore raw

PATCH 234/251 MIPS: Loongson: Fix return value of loongson_hwmon_init

In reply to Sasha Levin

From: Tiezhu Yang <[email protected]>

[ Upstream commit dece3c2a320b0a6d891da6ff774ab763969b6860 ]

When call function hwmon_device_register failed, use the actual return value instead of always -ENOMEM.

Fixes 64f09aa967e1 ("MIPS: Loongson-3: Add CPU Hwmon platform driver")
Cc Ralf Baechle <[email protected]>
Cc James Hogan <[email protected]>
Cc Huacai Chen <[email protected]>
Cc Jiaxun Yang <[email protected]>
---
 drivers/platform/mips/cpu_hwmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/mips/cpu_hwmon.c +1 -1
index 4300a558d0f3..d02214a3f8e3 100644
@@ -155,7 +155,7 @@ static int __init loongson_hwmon_init(void)
 
 	cpu_hwmon_dev = hwmon_device_register(NULL);
 	if (IS_ERR(cpu_hwmon_dev)) {
-		ret = -ENOMEM;
+		ret = PTR_ERR(cpu_hwmon_dev);
 		pr_err("hwmon_device_register fail!\n");
 		goto fail_hwmon_device_register;
 	}
Signature · 1 line
2.20.1
author maintainer
#193 lore raw

PATCH 233/251 scsi: core: scsi_trace: Use get_unaligned_be*()

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit b1335f5b0486f61fb66b123b40f8e7a98e49605d ]

This patch fixes an unintended sign extension on left shifts. From Colin
King: "Shifting a u8 left will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an u64 will sign extend the value causing the upper 32 bits to be set in the result."

Fix this by using get_unaligned_be*() instead.

Fixes bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc Christoph Hellwig <[email protected]>
Cc Hannes Reinecke <[email protected]>
Cc Douglas Gilbert <[email protected]>
---
 drivers/scsi/scsi_trace.c | 113 +++++++++++---------------------------
 1 file changed, 33 insertions(+), 80 deletions(-)
drivers/scsi/scsi_trace.c +33 -80
index 617a60737590..22472d140ef7 100644
@@ -21,7 +21,7 @@
 #include <trace/events/scsi.h>
 
 #define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f)
-#define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9])
+#define SERVICE_ACTION32(cdb) (get_unaligned_be16(&cdb[8]))
 
 static const char *
 scsi_trace_misc(struct trace_seq *, unsigned char *, int);
@@ -51,17 +51,12 @@ static const char *
 scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
+	u32 lba, txlen;
 
-	lba |= (cdb[2] << 24);
-	lba |= (cdb[3] << 16);
-	lba |= (cdb[4] << 8);
-	lba |=  cdb[5];
-	txlen |= (cdb[7] << 8);
-	txlen |=  cdb[8];
+	lba = get_unaligned_be32(&cdb[2]);
+	txlen = get_unaligned_be16(&cdb[7]);
 
-	trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
-			 (unsigned long long)lba, (unsigned long long)txlen,
+	trace_seq_printf(p, "lba=%u txlen=%u protect=%u", lba, txlen,
 			 cdb[1] >> 5);
 
 	if (cdb[0] == WRITE_SAME)
@@ -76,19 +71,12 @@ static const char *
 scsi_trace_rw12(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
-
-	lba |= (cdb[2] << 24);
-	lba |= (cdb[3] << 16);
-	lba |= (cdb[4] << 8);
-	lba |=  cdb[5];
-	txlen |= (cdb[6] << 24);
-	txlen |= (cdb[7] << 16);
-	txlen |= (cdb[8] << 8);
-	txlen |=  cdb[9];
-
-	trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
-			 (unsigned long long)lba, (unsigned long long)txlen,
+	u32 lba, txlen;
+
+	lba = get_unaligned_be32(&cdb[2]);
+	txlen = get_unaligned_be32(&cdb[6]);
+
+	trace_seq_printf(p, "lba=%u txlen=%u protect=%u", lba, txlen,
 			 cdb[1] >> 5);
 	trace_seq_putc(p, 0);
 
@@ -99,23 +87,13 @@ static const char *
 scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
-
-	lba |= ((u64)cdb[2] << 56);
-	lba |= ((u64)cdb[3] << 48);
-	lba |= ((u64)cdb[4] << 40);
-	lba |= ((u64)cdb[5] << 32);
-	lba |= (cdb[6] << 24);
-	lba |= (cdb[7] << 16);
-	lba |= (cdb[8] << 8);
-	lba |=  cdb[9];
-	txlen |= (cdb[10] << 24);
-	txlen |= (cdb[11] << 16);
-	txlen |= (cdb[12] << 8);
-	txlen |=  cdb[13];
-
-	trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
-			 (unsigned long long)lba, (unsigned long long)txlen,
+	u64 lba;
+	u32 txlen;
+
+	lba = get_unaligned_be64(&cdb[2]);
+	txlen = get_unaligned_be32(&cdb[10]);
+
+	trace_seq_printf(p, "lba=%llu txlen=%u protect=%u", lba, txlen,
 			 cdb[1] >> 5);
 
 	if (cdb[0] == WRITE_SAME_16)
@@ -130,8 +108,8 @@ static const char *
 scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p), *cmd;
-	sector_t lba = 0, txlen = 0;
-	u32 ei_lbrt = 0;
+	u64 lba;
+	u32 ei_lbrt, txlen;
 
 	switch (SERVICE_ACTION32(cdb)) {
 	case READ_32:
@@ -151,26 +129,12 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
 		goto out;
 	}
 
-	lba |= ((u64)cdb[12] << 56);
-	lba |= ((u64)cdb[13] << 48);
-	lba |= ((u64)cdb[14] << 40);
-	lba |= ((u64)cdb[15] << 32);
-	lba |= (cdb[16] << 24);
-	lba |= (cdb[17] << 16);
-	lba |= (cdb[18] << 8);
-	lba |=  cdb[19];
-	ei_lbrt |= (cdb[20] << 24);
-	ei_lbrt |= (cdb[21] << 16);
-	ei_lbrt |= (cdb[22] << 8);
-	ei_lbrt |=  cdb[23];
-	txlen |= (cdb[28] << 24);
-	txlen |= (cdb[29] << 16);
-	txlen |= (cdb[30] << 8);
-	txlen |=  cdb[31];
-
-	trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu protect=%u ei_lbrt=%u",
-			 cmd, (unsigned long long)lba,
-			 (unsigned long long)txlen, cdb[10] >> 5, ei_lbrt);
+	lba = get_unaligned_be64(&cdb[12]);
+	ei_lbrt = get_unaligned_be32(&cdb[20]);
+	txlen = get_unaligned_be32(&cdb[28]);
+
+	trace_seq_printf(p, "%s_32 lba=%llu txlen=%u protect=%u ei_lbrt=%u",
+			 cmd, lba, txlen, cdb[10] >> 5, ei_lbrt);
 
 	if (SERVICE_ACTION32(cdb) == WRITE_SAME_32)
 		trace_seq_printf(p, " unmap=%u", cdb[10] >> 3 & 1);
@@ -185,7 +149,7 @@ static const char *
 scsi_trace_unmap(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	unsigned int regions = cdb[7] << 8 | cdb[8];
+	unsigned int regions = get_unaligned_be16(&cdb[7]);
 
 	trace_seq_printf(p, "regions=%u", (regions - 8) / 16);
 	trace_seq_putc(p, 0);
@@ -197,8 +161,8 @@ static const char *
 scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p), *cmd;
-	sector_t lba = 0;
-	u32 alloc_len = 0;
+	u64 lba;
+	u32 alloc_len;
 
 	switch (SERVICE_ACTION16(cdb)) {
 	case SAI_READ_CAPACITY_16:
@@ -212,21 +176,10 @@ scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
 		goto out;
 	}
 
-	lba |= ((u64)cdb[2] << 56);
-	lba |= ((u64)cdb[3] << 48);
-	lba |= ((u64)cdb[4] << 40);
-	lba |= ((u64)cdb[5] << 32);
-	lba |= (cdb[6] << 24);
-	lba |= (cdb[7] << 16);
-	lba |= (cdb[8] << 8);
-	lba |=  cdb[9];
-	alloc_len |= (cdb[10] << 24);
-	alloc_len |= (cdb[11] << 16);
-	alloc_len |= (cdb[12] << 8);
-	alloc_len |=  cdb[13];
-
-	trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd,
-			 (unsigned long long)lba, alloc_len);
+	lba = get_unaligned_be64(&cdb[2]);
+	alloc_len = get_unaligned_be32(&cdb[10]);
+
+	trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd, lba, alloc_len);
 
 out:
 	trace_seq_putc(p, 0);
Signature · 1 line
2.20.1
author maintainer
#188 lore raw

PATCH 228/251 cw1200: Fix a signedness bug in cw1200_load_firmware()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 4a50d454502f1401171ff061a5424583f91266db ]

The "priv->hw_type" is an enum and in this context GCC will treat it as an unsigned int so the error handling will never trigger.

Fixes a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
---
 drivers/net/wireless/st/cw1200/fwio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/st/cw1200/fwio.c +3 -3
index 30e7646d04af..16be7fa82a23 100644
@@ -323,12 +323,12 @@ int cw1200_load_firmware(struct cw1200_common *priv)
 		goto out;
 	}
 
-	priv->hw_type = cw1200_get_hw_type(val32, &major_revision);
-	if (priv->hw_type < 0) {
+	ret = cw1200_get_hw_type(val32, &major_revision);
+	if (ret < 0) {
 		pr_err("Can't deduce hardware type.\n");
-		ret = -ENOTSUPP;
 		goto out;
 	}
+	priv->hw_type = ret;
 
 	/* Set DPLL Reg value, and read back to confirm writes work */
 	ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID,
Signature · 1 line
2.20.1
author maintainer
#182 lore raw

PATCH 222/251 afs: Fix large file support

In reply to Sasha Levin

From: Marc Dionne <[email protected]>

[ Upstream commit b485275f1aca8a9da37fd35e4fad673935e827da ]

By default s_maxbytes is set to MAX_NON_LFS, which limits the usable file size to 2GB, enforced by the vfs.

Commit b9b1f8d5930a ("AFS: write support fixes") added support for the 64-bit fetch and store server operations, but did not change this value. As a result, attempts to write past the 2G mark result in EFBIG errors:

 $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
 dd: error writing 'foo': File too large

Set s_maxbytes to MAX_LFS_FILESIZE.

Fixes b9b1f8d5930a ("AFS: write support fixes")
---
 fs/afs/super.c | 1 +
 1 file changed, 1 insertion(+)
fs/afs/super.c +1 -0
index fbdb022b75a2..65389394e202 100644
@@ -317,6 +317,7 @@ static int afs_fill_super(struct super_block *sb,
 	/* fill in the superblock */
 	sb->s_blocksize		= PAGE_SIZE;
 	sb->s_blocksize_bits	= PAGE_SHIFT;
+	sb->s_maxbytes		= MAX_LFS_FILESIZE;
 	sb->s_magic		= AFS_FS_MAGIC;
 	sb->s_op		= &afs_super_ops;
 	sb->s_bdi		= &as->volume->bdi;
Signature · 1 line
2.20.1
author maintainer
#181 lore raw

PATCH 221/251 net: qca_spi: Move reset_count to struct qcaspi

In reply to Sasha Levin

From: Stefan Wahren <[email protected]>

[ Upstream commit bc19c32904e36548335b35fdce6ce734e20afc0a ]

The reset counter is specific for every QCA700x chip. So move this into the private driver struct. Otherwise we get unpredictable reset behavior in setups with multiple QCA700x chips.

Fixes 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000)
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 9 ++++-----
 drivers/net/ethernet/qualcomm/qca_spi.h | 1 +
 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/qualcomm/qca_spi.c +4 -5
index 21f546587e3d..31583d6f044f 100644
@@ -438,7 +438,6 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
 	u16 signature = 0;
 	u16 spi_config;
 	u16 wrbuf_space = 0;
-	static u16 reset_count;
 
 	if (event == QCASPI_EVENT_CPUON) {
 		/* Read signature twice, if not valid
@@ -491,13 +490,13 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
 
 		qca->sync = QCASPI_SYNC_RESET;
 		qca->stats.trig_reset++;
-		reset_count = 0;
+		qca->reset_count = 0;
 		break;
 	case QCASPI_SYNC_RESET:
-		reset_count++;
+		qca->reset_count++;
 		netdev_dbg(qca->net_dev, "sync: waiting for CPU on, count %u.\n",
-			   reset_count);
-		if (reset_count >= QCASPI_RESET_TIMEOUT) {
+			   qca->reset_count);
+		if (qca->reset_count >= QCASPI_RESET_TIMEOUT) {
 			/* reset did not seem to take place, try again */
 			qca->sync = QCASPI_SYNC_UNKNOWN;
 			qca->stats.reset_timeout++;
drivers/net/ethernet/qualcomm/qca_spi.h +1 -0
index 6e31a0e744a4..c48c314ca4df 100644
@@ -97,6 +97,7 @@ struct qcaspi {
 
 	unsigned int intr_req;
 	unsigned int intr_svc;
+	u16 reset_count;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *device_root;
Signature · 1 line
2.20.1
author maintainer
#209 lore raw

PATCH 249/251 arm64: dts: juno: Fix UART frequency

In reply to Sasha Levin

From: Andre Przywara <[email protected]>

[ Upstream commit 39a1a8941b27c37f79508426e27a2ec29829d66c ]

Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT.

Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!).

Fix this to correct the baud rate divisor calculation on the Juno board.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf
[2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf

Fixes 71f867ec130e ("arm64: Add Juno board device tree.")
---
 arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/arm/juno-clocks.dtsi +2 -2
index 25352ed943e6..00bcbf7688c7 100644
@@ -8,10 +8,10 @@
  */
 
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7273800hz {
+	soc_uartclk: refclk7372800hz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <7273800>;
+		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
Signature · 1 line
2.20.1
author maintainer
#206 lore raw

PATCH 246/251 powerpc/powernv: Disable native PCIe port management

In reply to Sasha Levin

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 9d72dcef891030545f39ad386a30cf91df517fb2 ]

On PowerNV the PCIe topology is (currently) managed by the powernv platform code in Linux in cooperation with the platform firmware. Linux's native PCIe port service drivers operate independently of both and this can cause problems.

The main issue is that the portbus driver will conflict with the platform specific hotplug driver (pnv_php) over ownership of the MSI used to notify the host when a hotplug event occurs. The portbus driver claims this MSI on behalf of the individual port services because the same interrupt is used for hotplug events, PMEs (on root ports), and link bandwidth change notifications. The portbus driver will always claim the interrupt even if the individual port service drivers, such as pciehp, are compiled out.

The second, bigger, problem is that the hotplug port service driver fundamentally does not work on PowerNV. The platform assumes that all PCI devices have a corresponding arch-specific handle derived from the DT node for the device (pci_dn) and without one the platform will not allow a PCI device to be enabled. This problem is largely due to historical baggage, but it can't be resolved without significant re-factoring of the platform PCI support.

We can fix these problems in the interim by setting the "pcie_ports_disabled" flag during platform initialisation. The flag indicates the platform owns the PCIe ports which stops the portbus driver from being registered.

This does have the side effect of disabling all port services drivers that is: AER, PME, BW notifications, hotplug, and DPC. However, this is not a huge disadvantage on PowerNV since these services are either unused or handled through other means.

Fixes 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
---
 arch/powerpc/platforms/powernv/pci.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/powerpc/platforms/powernv/pci.c +17 -0
index 98cc8ba07c23..00dbf1e895a9 100644
@@ -923,6 +923,23 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
+#ifdef CONFIG_PCIEPORTBUS
+	/*
+	 * On PowerNV PCIe devices are (currently) managed in cooperation
+	 * with firmware. This isn't *strictly* required, but there's enough
+	 * assumptions baked into both firmware and the platform code that
+	 * it's unwise to allow the portbus services to be used.
+	 *
+	 * We need to fix this eventually, but for now set this flag to disable
+	 * the portbus driver. The AER service isn't required since that AER
+	 * events are handled via EEH. The pciehp hotplug driver can't work
+	 * without kernel changes (and portbus binding breaks pnv_php). The
+	 * other services also require some thinking about how we're going
+	 * to integrate them.
+	 */
+	pcie_ports_disabled = true;
+#endif
+
 	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);
Signature · 1 line
2.20.1
author maintainer
#202 lore raw

PATCH 242/251 rtc: msm6242: Fix reading of 10-hour digit

In reply to Sasha Levin

From: Kars de Jong <[email protected]>

[ Upstream commit e34494c8df0cd96fc432efae121db3212c46ae48 ]

The driver was reading the wrong register as the 10-hour digit due to a misplaced ')'. It was in fact reading the 1-second digit register due to this bug.

Also remove the use of a magic number for the hour mask and use the define for it which was already present.

---
 drivers/rtc/rtc-msm6242.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/rtc/rtc-msm6242.c +2 -1
index c1c5c4e3b3b4..c981301efbe5 100644
@@ -132,7 +132,8 @@ static int msm6242_read_time(struct device *dev, struct rtc_time *tm)
 		      msm6242_read(priv, MSM6242_SECOND1);
 	tm->tm_min  = msm6242_read(priv, MSM6242_MINUTE10) * 10 +
 		      msm6242_read(priv, MSM6242_MINUTE1);
-	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10 & 3)) * 10 +
+	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10) &
+		       MSM6242_HOUR10_HR_MASK) * 10 +
 		      msm6242_read(priv, MSM6242_HOUR1);
 	tm->tm_mday = msm6242_read(priv, MSM6242_DAY10) * 10 +
 		      msm6242_read(priv, MSM6242_DAY1);
Signature · 1 line
2.20.1
author maintainer
#203 lore raw

PATCH 243/251 scsi: qla4xxx: fix double free bug

In reply to Sasha Levin

From: Pan Bian <[email protected]>

[ Upstream commit 3fe3d2428b62822b7b030577cd612790bdd8c941 ]

The variable init_fw_cb is released twice, resulting in a double free bug. The call to the function dma_free_coherent() before goto is removed to get rid of potential double free.

---
 drivers/scsi/qla4xxx/ql4_mbx.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/scsi/qla4xxx/ql4_mbx.c +0 -3
index c291fdff1b33..ea3b77ba12a2 100644
@@ -641,9 +641,6 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 
 	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
-		dma_free_coherent(&ha->pdev->dev,
-				  sizeof(struct addr_ctrl_blk),
-				  init_fw_cb, init_fw_cb_dma);
 		goto exit_init_fw_cb;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#201 lore raw

PATCH 241/251 tty: serial: pch_uart: correct usage of dma_unmap_sg

In reply to Sasha Levin

From: Peng Fan <[email protected]>

[ Upstream commit 74887542fdcc92ad06a48c0cca17cdf09fc8aa00 ]

Per Documentation/DMA-API-HOWTO.txt,
To unmap a scatterlist, just call:

	dma_unmap_sg(dev, sglist, nents, direction);

.. note::

The 'nents' argument to the dma_unmap_sg call must be the _same_ one you passed into the dma_map_sg call, it should _NOT_ be the 'count' value _returned_ from the dma_map_sg call.

However in the driver, priv->nent is directly assigned with value returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap, this breaks the API usage.

So introduce a new entry orig_nent to remember 'nents'.

Fixes da3564ee027e ("pch_uart: add multi-scatter processing")
---
 drivers/tty/serial/pch_uart.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/tty/serial/pch_uart.c +4 -1
index 42caccb5e87e..30b577384a1d 100644
@@ -252,6 +252,7 @@ struct eg20t_port {
 	struct dma_chan			*chan_rx;
 	struct scatterlist		*sg_tx_p;
 	int				nent;
+	int				orig_nent;
 	struct scatterlist		sg_rx;
 	int				tx_dma_use;
 	void				*rx_buf_virt;
@@ -806,9 +807,10 @@ static void pch_dma_tx_complete(void *arg)
 	}
 	xmit->tail &= UART_XMIT_SIZE - 1;
 	async_tx_ack(priv->desc_tx);
-	dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
+	dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
 	priv->nent = 0;
+	priv->orig_nent = 0;
 	kfree(priv->sg_tx_p);
 	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 }
@@ -1033,6 +1035,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 		dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 		return 0;
 	}
+	priv->orig_nent = num;
 	priv->nent = nent;
 
 	for (i = 0; i < nent; i++, sg++) {
Signature · 1 line
2.20.1
author maintainer
#200 lore raw

PATCH 240/251 tty: serial: imx: use the sg count from dma_map_sg

In reply to Sasha Levin

From: Peng Fan <[email protected]>

[ Upstream commit 596fd8dffb745afcebc0ec6968e17fe29f02044c ]

The dmaengine_prep_slave_sg needs to use sg count returned by dma_map_sg, not use sport->dma_tx_nents, because the return value of dma_map_sg is not always same with "nents".

Fixes b4cdc8f61beb ("serial: imx: add DMA support for imx6q")
---
 drivers/tty/serial/imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/imx.c +1 -1
index 6d596c635159..e75bd8d7e6f6 100644
@@ -548,7 +548,7 @@ static void imx_dma_tx(struct imx_port *sport)
 		dev_err(dev, "DMA mapping error for TX.\n");
 		return;
 	}
-	desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
+	desc = dmaengine_prep_slave_sg(chan, sgl, ret,
 					DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 	if (!desc) {
 		dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
Signature · 1 line
2.20.1
author maintainer
#197 lore raw

PATCH 237/251 regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id

In reply to Sasha Levin

From: Stephan Gerhold <[email protected]>

[ Upstream commit 458ea3ad033fc86e291712ce50cbe60c3428cf30 ]

Those regulators are not actually supported by the AB8500 regulator driver. There is no ab8500_regulator_info for them and no entry in ab8505_regulator_match.

As such, they cannot be registered successfully, and looking them up in ab8505_regulator_match causes an out-of-bounds array read.

Fixes 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc Linus Walleij <[email protected]>
---
 include/linux/regulator/ab8500.h | 2 --
 1 file changed, 2 deletions(-)
include/linux/regulator/ab8500.h +0 -2
index 260c4aa1d976..3f6b8b9ef49d 100644
@@ -43,8 +43,6 @@ enum ab8505_regulator_id {
 	AB8505_LDO_ANAMIC2,
 	AB8505_LDO_AUX8,
 	AB8505_LDO_ANA,
-	AB8505_SYSCLKREQ_2,
-	AB8505_SYSCLKREQ_4,
 	AB8505_NUM_REGULATORS,
 };
 
Signature · 1 line
2.20.1
author maintainer
#166 lore raw

PATCH 206/251 of: mdio: Fix a signedness bug in of_phy_get_and_connect()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit d7eb651212fdbafa82d485d8e76095ac3b14c193 ]

The "iface" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered.

Fixes b78624125304 ("of_mdio: Abstract a general interface for phy connect")
---
 drivers/of/of_mdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/of/of_mdio.c +1 -1
index 262281bd68fa..1e70851b1530 100644
@@ -353,7 +353,7 @@ struct phy_device *of_phy_get_and_connect(struct net_device *dev,
 	struct phy_device *phy;
 
 	iface = of_get_phy_mode(np);
-	if (iface < 0)
+	if ((int)iface < 0)
 		return NULL;
 
 	phy_np = of_parse_phandle(np, "phy-handle", 0);
Signature · 1 line
2.20.1
author maintainer
#195 lore raw

PATCH 235/251 media: exynos4-is: Fix recursive locking in isp_video_release()

In reply to Sasha Levin

From: Seung-Woo Kim <[email protected]>

[ Upstream commit 704c6c80fb471d1bb0ef0d61a94617d1d55743cd ]

Quoted 1 line

From isp_video_release(), &isp->video_lock is held and subsequent

vb2_fop_release() tries to lock vdev->lock which is same with the previous one. Replace vb2_fop_release() with _vb2_fop_release() to fix the recursive locking.

Fixes 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release")
---
 drivers/media/platform/exynos4-is/fimc-isp-video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/exynos4-is/fimc-isp-video.c +1 -1
index e00fa03ddc3e..0c0eec671d49 100644
@@ -316,7 +316,7 @@ static int isp_video_release(struct file *file)
 		ivc->streaming = 0;
 	}
 
-	vb2_fop_release(file);
+	_vb2_fop_release(file, NULL);
 
 	if (v4l2_fh_is_singular_file(file)) {
 		fimc_pipeline_call(&ivc->ve, close);
Signature · 1 line
2.20.1
author maintainer
#164 lore raw

PATCH 204/251 net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 25a584955f020d6ec499c513923fb220f3112d2b ]

The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered.

Fixes 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bcmsysport.c +1 -1
index 95874c10c23b..e3b41af65d18 100644
@@ -1773,7 +1773,7 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 
 	priv->phy_interface = of_get_phy_mode(dn);
 	/* Default to GMII interface mode */
-	if (priv->phy_interface < 0)
+	if ((int)priv->phy_interface < 0)
 		priv->phy_interface = PHY_INTERFACE_MODE_GMII;
 
 	/* In the case of a fixed PHY, the DT node associated
Signature · 1 line
2.20.1
author maintainer
#191 lore raw

PATCH 231/251 scsi: esas2r: unlock on error in esas2r_nvram_read_direct()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 906ca6353ac09696c1bf0892513c8edffff5e0a6 ]

This error path is missing an unlock.

Fixes 26780d9e12ed ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver")
---
 drivers/scsi/esas2r/esas2r_flash.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/esas2r/esas2r_flash.c +1 -0
index 7bd376d95ed5..b02ac389e6c6 100644
@@ -1197,6 +1197,7 @@ bool esas2r_nvram_read_direct(struct esas2r_adapter *a)
 	if (!esas2r_read_flash_block(a, a->nvram, FLS_OFFSET_NVR,
 				     sizeof(struct esas2r_sas_nvram))) {
 		esas2r_hdebug("NVRAM read failed, using defaults");
+		up(&a->nvram_semaphore);
 		return false;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#160 lore raw

PATCH 200/251 net: sonic: replace dev_kfree_skb in sonic_send_packet

In reply to Sasha Levin

From: Mao Wenan <[email protected]>

[ Upstream commit 49f6c90bf6805948b597eabb499e500a47cf24be ]

sonic_send_packet will be processed in irq or non-irq context, so it would better use dev_kfree_skb_any instead of dev_kfree_skb.

Fixes d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers")
---
 drivers/net/ethernet/natsemi/sonic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/natsemi/sonic.c +1 -1
index 11f472fd5d47..a051dddcbd76 100644
@@ -222,7 +222,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE);
 	if (!laddr) {
 		pr_err_ratelimited("%s: failed to map tx DMA buffer.\n", dev->name);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#187 lore raw

PATCH 227/251 media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support

In reply to Sasha Levin

From: Janusz Krzysztofik <[email protected]>

[ Upstream commit 39034bb0c26b76a2c3abc54aa28c185f18b40c2f ]

Commit da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") converted a former ov6650_g_fmt() video operation callback to an ov6650_get_fmt() pad operation callback. However, the converted function disregards a format->which flag that pad operations should obey and always returns active frame format settings.

That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with -EINVAL, or providing the response from a pad config argument, likely updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt(). Since implementation of the latter is trivial, go for it.

Fixes da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt")
---
 drivers/media/i2c/soc_camera/ov6650.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/media/i2c/soc_camera/ov6650.c +9 -3
index 3b118d45d433..3c959e48855c 100644
@@ -526,10 +526,16 @@ static int ov6650_get_fmt(struct v4l2_subdev *sd,
 	*mf = ov6650_def_fmt;
 
 	/* update media bus format code and frame size */
-	mf->width	= priv->rect.width >> priv->half_scale;
-	mf->height	= priv->rect.height >> priv->half_scale;
-	mf->code	= priv->code;
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mf->width = cfg->try_fmt.width;
+		mf->height = cfg->try_fmt.height;
+		mf->code = cfg->try_fmt.code;
 
+	} else {
+		mf->width = priv->rect.width >> priv->half_scale;
+		mf->height = priv->rect.height >> priv->half_scale;
+		mf->code = priv->code;
+	}
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#185 lore raw

PATCH 225/251 media: ov6650: Fix incorrect use of JPEG colorspace

In reply to Sasha Levin

From: Janusz Krzysztofik <[email protected]>

[ Upstream commit 12500731895ef09afc5b66b86b76c0884fb9c7bf ]

Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support JPEG format, fix it to always select V4L2_COLORSPACE_SRGB.

Fixes 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
---
 drivers/media/i2c/soc_camera/ov6650.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/media/i2c/soc_camera/ov6650.c +2 -11
index 7a119466f973..e9271ad9ee4c 100644
@@ -203,7 +203,6 @@ struct ov6650 {
 	unsigned long		pclk_max;	/* from resolution and format */
 	struct v4l2_fract	tpf;		/* as requested with s_parm */
 	u32 code;
-	enum v4l2_colorspace	colorspace;
 };
 
 
@@ -515,7 +514,7 @@ static int ov6650_get_fmt(struct v4l2_subdev *sd,
 	mf->width	= priv->rect.width >> priv->half_scale;
 	mf->height	= priv->rect.height >> priv->half_scale;
 	mf->code	= priv->code;
-	mf->colorspace	= priv->colorspace;
+	mf->colorspace	= V4L2_COLORSPACE_SRGB;
 	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
@@ -624,11 +623,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		priv->pclk_max = 8000000;
 	}
 
-	if (code == MEDIA_BUS_FMT_SBGGR8_1X8)
-		priv->colorspace = V4L2_COLORSPACE_SRGB;
-	else if (code != 0)
-		priv->colorspace = V4L2_COLORSPACE_JPEG;
-
 	if (half_scale) {
 		dev_dbg(&client->dev, "max resolution: QCIF\n");
 		coma_set |= COMA_QCIF;
@@ -685,7 +679,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		priv->code = code;
 
 	if (!ret) {
-		mf->colorspace	= priv->colorspace;
 		mf->width = priv->rect.width >> half_scale;
 		mf->height = priv->rect.height >> half_scale;
 	}
@@ -708,6 +701,7 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
 				&mf->height, 2, H_CIF, 1, 0);
 
 	mf->field = V4L2_FIELD_NONE;
+	mf->colorspace = V4L2_COLORSPACE_SRGB;
 
 	switch (mf->code) {
 	case MEDIA_BUS_FMT_Y10_1X10:
@@ -717,12 +711,10 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
 	case MEDIA_BUS_FMT_YUYV8_2X8:
 	case MEDIA_BUS_FMT_VYUY8_2X8:
 	case MEDIA_BUS_FMT_UYVY8_2X8:
-		mf->colorspace = V4L2_COLORSPACE_JPEG;
 		break;
 	default:
 		mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
 	case MEDIA_BUS_FMT_SBGGR8_1X8:
-		mf->colorspace = V4L2_COLORSPACE_SRGB;
 		break;
 	}
 
@@ -1048,7 +1040,6 @@ static int ov6650_probe(struct i2c_client *client,
 	priv->rect.height = H_CIF;
 	priv->half_scale  = false;
 	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
-	priv->colorspace  = V4L2_COLORSPACE_JPEG;
 
 	ret = ov6650_video_probe(client);
 	if (ret)
Signature · 1 line
2.20.1
author maintainer
#143 lore raw

PATCH 183/251 signal: Allow cifs and drbd to receive their terminating signals

In reply to Sasha Levin

From: "Eric W. Biederman" <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")
---
 drivers/block/drbd/drbd_main.c |  2 ++
 fs/cifs/connect.c              |  2 +-
 include/linux/signal.h         | 15 ++++++++++++++-
 kernel/signal.c                |  5 +++++
 4 files changed, 22 insertions(+), 2 deletions(-)
drivers/block/drbd/drbd_main.c +2 -0
index f5c24459fc5c..daa9cef96ec6 100644
@@ -332,6 +332,8 @@ static int drbd_thread_setup(void *arg)
 		 thi->name[0],
 		 resource->name);
 
+	allow_kernel_signal(DRBD_SIGKILL);
+	allow_kernel_signal(SIGXCPU);
 restart:
 	retval = thi->function(thi);
 
fs/cifs/connect.c +1 -1
index 7d46025d5e89..751bdde6515d 100644
@@ -885,7 +885,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
-	allow_signal(SIGKILL);
+	allow_kernel_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
include/linux/signal.h +14 -1
index 5308304993be..ffa58ff53e22 100644
@@ -313,6 +313,9 @@ extern void signal_setup_done(int failed, struct ksignal *ksig, int stepping);
 extern void exit_signals(struct task_struct *tsk);
 extern void kernel_sigaction(int, __sighandler_t);
 
+#define SIG_KTHREAD ((__force __sighandler_t)2)
+#define SIG_KTHREAD_KERNEL ((__force __sighandler_t)3)
+
 static inline void allow_signal(int sig)
 {
 	/*
@@ -320,7 +323,17 @@ static inline void allow_signal(int sig)
 	 * know it'll be handled, so that they don't get converted to
 	 * SIGKILL or just silently dropped.
 	 */
-	kernel_sigaction(sig, (__force __sighandler_t)2);
+	kernel_sigaction(sig, SIG_KTHREAD);
+}
+
+static inline void allow_kernel_signal(int sig)
+{
+	/*
+	 * Kernel threads handle their own signals. Let the signal code
+	 * know signals sent by the kernel will be handled, so that they
+	 * don't get silently dropped.
+	 */
+	kernel_sigaction(sig, SIG_KTHREAD_KERNEL);
 }
 
 static inline void disallow_signal(int sig)
kernel/signal.c +5 -0
index 30914b3c76b2..57fadbe69c2e 100644
@@ -79,6 +79,11 @@ static int sig_task_ignored(struct task_struct *t, int sig, bool force)
 	    handler == SIG_DFL && !(force && sig_kernel_only(sig)))
 		return 1;
 
+	/* Only allow kernel generated signals to this kthread */
+	if (unlikely((t->flags & PF_KTHREAD) &&
+		     (handler == SIG_KTHREAD_KERNEL) && !force))
+		return true;
+
 	return sig_handler_ignored(handler, sig);
 }
 
Signature · 1 line
2.20.1
author maintainer
#180 lore raw

PATCH 220/251 net: netem: correct the parent's backlog when corrupted packet was dropped

In reply to Sasha Levin

From: Jakub Kicinski <[email protected]>

[ Upstream commit e0ad032e144731a5928f2d75e91c2064ba1a764c ]

If packet corruption failed we jump to finish_segs and return NET_XMIT_SUCCESS. Seeing success will make the parent qdisc increment its backlog, that's incorrect - we need to return NET_XMIT_DROP.

Fixes 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
---
 net/sched/sch_netem.c | 2 ++
 1 file changed, 2 insertions(+)
net/sched/sch_netem.c +2 -0
index 11c4c93f5ded..e06491314d59 100644
@@ -609,6 +609,8 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		}
 		/* Parent qdiscs accounted for 1 skb of size @prev_len */
 		qdisc_tree_reduce_backlog(sch, -(nb - 1), -(len - prev_len));
+	} else if (!skb) {
+		return NET_XMIT_DROP;
 	}
 	return NET_XMIT_SUCCESS;
 }
Signature · 1 line
2.20.1
author maintainer
#179 lore raw

PATCH 219/251 net: netem: fix error path for corrupted GSO frames

In reply to Sasha Levin

From: Jakub Kicinski <[email protected]>

[ Upstream commit a7fa12d15855904aff1716e1fc723c03ba38c5cc ]

To corrupt a GSO frame we first perform segmentation. We then proceed using the first segment instead of the full GSO skb and requeue the rest of the segments as separate packets.

If there are any issues with processing the first segment we still want to process the rest, therefore we jump to the finish_segs label.

Commit 177b8007463c ("net: netem: fix backlog accounting for corrupted GSO frames") started using the pointer to the first segment in the "rest of segments processing", but as mentioned above the first segment may had already been freed at this point.

Backlog corrections for parent qdiscs have to be adjusted.

Fixes 177b8007463c ("net: netem: fix backlog accounting for corrupted GSO frames")
---
 net/sched/sch_netem.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
net/sched/sch_netem.c +6 -3
index 308d92491757..11c4c93f5ded 100644
@@ -510,6 +510,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		if (skb->ip_summed == CHECKSUM_PARTIAL &&
 		    skb_checksum_help(skb)) {
 			qdisc_drop(skb, sch, to_free);
+			skb = NULL;
 			goto finish_segs;
 		}
 
@@ -586,9 +587,10 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 finish_segs:
 	if (segs) {
 		unsigned int len, last_len;
-		int nb = 0;
+		int nb;
 
-		len = skb->len;
+		len = skb ? skb->len : 0;
+		nb = skb ? 1 : 0;
 
 		while (segs) {
 			skb2 = segs->next;
@@ -605,7 +607,8 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 			}
 			segs = skb2;
 		}
-		qdisc_tree_reduce_backlog(sch, -nb, prev_len - len);
+		/* Parent qdiscs accounted for 1 skb of size @prev_len */
+		qdisc_tree_reduce_backlog(sch, -(nb - 1), -(len - prev_len));
 	}
 	return NET_XMIT_SUCCESS;
 }
Signature · 1 line
2.20.1
author maintainer
#178 lore raw

PATCH 218/251 dmaengine: imx-sdma: fix size check for sdma script_number

In reply to Sasha Levin

From: Robin Gong <[email protected]>

[ Upstream commit bd73dfabdda280fc5f05bdec79b6721b4b2f035f ]

Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3
(41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c:
for (i = 0; i < sdma->script_number; i++)

	if (addr_arr[i] > 0)
		saddr_arr[i] = addr_arr[i]; /* memory corrupt here */

That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts).

Fixes a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware")
[vkoul: update the patch title]
---
 drivers/dma/imx-sdma.c                     | 8 ++++++++
 include/linux/platform_data/dma-imx-sdma.h | 3 +++
 2 files changed, 11 insertions(+)
drivers/dma/imx-sdma.c +8 -0
index 9f240b2d85a5..558d509b7d85 100644
@@ -1441,6 +1441,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	if (!sdma->script_number)
 		sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
 
+	if (sdma->script_number > sizeof(struct sdma_script_start_addrs)
+				  / sizeof(s32)) {
+		dev_err(sdma->dev,
+			"SDMA script number %d not match with firmware.\n",
+			sdma->script_number);
+		return;
+	}
+
 	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];
include/linux/platform_data/dma-imx-sdma.h +3 -0
index 2d08816720f6..5bb0a119f39a 100644
@@ -50,7 +50,10 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
+	s32 mcu_2_zqspi_addr;
+	/* End of v4 array */
 };
 
 /**
Signature · 1 line
2.20.1
author maintainer
#176 lore raw

PATCH 216/251 USB: usb-skeleton: fix use-after-free after driver unbind

In reply to Sasha Levin

From: Johan Hovold <[email protected]>

[ Upstream commit 6353001852776e7eeaab4da78922d4c6f2b076af ]

The driver failed to stop its read URB on disconnect, something which could lead to a use-after-free in the completion handler after driver unbind in case the character device has been closed.

Fixes e7389cc9a7ff ("USB: skel_read really sucks royally")
---
 drivers/usb/usb-skeleton.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/usb-skeleton.c +1 -0
index f24374486623..1e6146f70cc7 100644
@@ -584,6 +584,7 @@ static void skel_disconnect(struct usb_interface *interface)
 	dev->disconnected = 1;
 	mutex_unlock(&dev->io_mutex);
 
+	usb_kill_urb(dev->bulk_in_urb);
 	usb_kill_anchored_urbs(&dev->submitted);
 
 	/* decrement our usage count */
Signature · 1 line
2.20.1
author maintainer
#173 lore raw

PATCH 213/251 llc: fix sk_buff refcounting in llc_conn_state_process()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit 36453c852816f19947ca482a595dffdd2efa4965 ]

If llc_conn_state_process() sees that llc_conn_service() put the skb on a list, it will drop one fewer references to it. This is wrong because the current behavior is that llc_conn_service() never consumes a reference to the skb.

The code also makes the number of skb references being dropped conditional on which of ind_prim and cfm_prim are nonzero, yet neither of these affects how many references are *acquired*. So there is extra code that tries to fix this up by sometimes taking another reference.

Remove the unnecessary/broken refcounting logic and instead just add an skb_get() before the only two places where an extra reference is actually consumed.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/llc_conn.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)
net/llc/llc_conn.c +6 -27
index 2689e95471dc..1bdbd134bd7a 100644
@@ -64,12 +64,6 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 	struct llc_sock *llc = llc_sk(skb->sk);
 	struct llc_conn_state_ev *ev = llc_conn_ev(skb);
 
-	/*
-	 * We have to hold the skb, because llc_conn_service will kfree it in
-	 * the sending path and we need to look at the skb->cb, where we encode
-	 * llc_conn_state_ev.
-	 */
-	skb_get(skb);
 	ev->ind_prim = ev->cfm_prim = 0;
 	/*
 	 * Send event to state machine
@@ -77,21 +71,12 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 	rc = llc_conn_service(skb->sk, skb);
 	if (unlikely(rc != 0)) {
 		printk(KERN_ERR "%s: llc_conn_service failed\n", __func__);
-		goto out_kfree_skb;
-	}
-
-	if (unlikely(!ev->ind_prim && !ev->cfm_prim)) {
-		/* indicate or confirm not required */
-		if (!skb->next)
-			goto out_kfree_skb;
 		goto out_skb_put;
 	}
 
-	if (unlikely(ev->ind_prim && ev->cfm_prim)) /* Paranoia */
-		skb_get(skb);
-
 	switch (ev->ind_prim) {
 	case LLC_DATA_PRIM:
+		skb_get(skb);
 		llc_save_primitive(sk, skb, LLC_DATA_PRIM);
 		if (unlikely(sock_queue_rcv_skb(sk, skb))) {
 			/*
@@ -108,6 +93,7 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 		 * skb->sk pointing to the newly created struct sock in
 		 * llc_conn_handler. -acme
 		 */
+		skb_get(skb);
 		skb_queue_tail(&sk->sk_receive_queue, skb);
 		sk->sk_state_change(sk);
 		break;
@@ -123,7 +109,6 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 				sk->sk_state_change(sk);
 			}
 		}
-		kfree_skb(skb);
 		sock_put(sk);
 		break;
 	case LLC_RESET_PRIM:
@@ -132,14 +117,11 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 		 * RESET is not being notified to upper layers for now
 		 */
 		printk(KERN_INFO "%s: received a reset ind!\n", __func__);
-		kfree_skb(skb);
 		break;
 	default:
-		if (ev->ind_prim) {
+		if (ev->ind_prim)
 			printk(KERN_INFO "%s: received unknown %d prim!\n",
 				__func__, ev->ind_prim);
-			kfree_skb(skb);
-		}
 		/* No indication */
 		break;
 	}
@@ -181,15 +163,12 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 		printk(KERN_INFO "%s: received a reset conf!\n", __func__);
 		break;
 	default:
-		if (ev->cfm_prim) {
+		if (ev->cfm_prim)
 			printk(KERN_INFO "%s: received unknown %d prim!\n",
 					__func__, ev->cfm_prim);
-			break;
-		}
-		goto out_skb_put; /* No confirmation */
+		/* No confirmation */
+		break;
 	}
-out_kfree_skb:
-	kfree_skb(skb);
 out_skb_put:
 	kfree_skb(skb);
 	return rc;
Signature · 1 line
2.20.1
author maintainer
#174 lore raw

PATCH 214/251 net: stmmac: fix length of PTP clock's name string

In reply to Sasha Levin

From: Antonio Borneo <[email protected]>

[ Upstream commit 5da202c88f8c355ad79bc2e8eb582e6d433060e7 ]

The field "name" in struct ptp_clock_info has a fixed size of 16 chars and is used as zero terminated string by clock_name_show() in drivers/ptp/ptp_sysfs.c
The current initialization value requires 17 chars to fit also the null termination, and this causes overflow to the next bytes in the struct when the string is read as null terminated:

	hexdump -C /sys/class/ptp/ptp0/clock_name
	00000000  73 74 6d 6d 61 63 5f 70  74 70 5f 63 6c 6f 63 6b  |stmmac_ptp_clock|
	00000010  a0 ac b9 03 0a                                    |.....|

where the extra 4 bytes (excluding the newline) after the string represent the integer 0x03b9aca0 = 62500000 assigned to the field "max_adj" that follows "name" in the same struct.

There is no strict requirement for the "name" content and in the comment in ptp_clock_kernel.h it's reported it should just be 'A short "friendly name" to identify the clock'.
Replace it with "stmmac ptp".

Fixes 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +1 -1
index 3eb281d1db08..231330809037 100644
@@ -158,7 +158,7 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
 /* structure describing a PTP hardware clock */
 static struct ptp_clock_info stmmac_ptp_clock_ops = {
 	.owner = THIS_MODULE,
-	.name = "stmmac_ptp_clock",
+	.name = "stmmac ptp",
 	.max_adj = 62500000,
 	.n_alarm = 0,
 	.n_ext_ts = 0,
Signature · 1 line
2.20.1
author maintainer
#138 lore raw

PATCH 178/251 crypto: caam - free resources in case caam_rng registration failed

In reply to Sasha Levin

From: Iuliana Prodan <[email protected]>

[ Upstream commit c59a1d41672a89b5cac49db1a472ff889e35a2d2 ]

Check the return value of the hardware registration for caam_rng and free resources in case of failure.

Fixes e24f7c9e87d4 ("crypto: caam - hwrng support")
---
 drivers/crypto/caam/caamrng.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/crypto/caam/caamrng.c +4 -1
index 9b92af2c7241..a77319bf221d 100644
@@ -361,7 +361,10 @@ static int __init caam_rng_init(void)
 		goto free_rng_ctx;
 
 	dev_info(dev, "registering rng-caam\n");
-	return hwrng_register(&caam_rng);
+
+	err = hwrng_register(&caam_rng);
+	if (!err)
+		return err;
 
 free_rng_ctx:
 	kfree(rng_ctx);
Signature · 1 line
2.20.1
author maintainer
#169 lore raw

PATCH 209/251 nvme: retain split access workaround for capability reads

In reply to Sasha Levin

From: Ard Biesheuvel <[email protected]>

[ Upstream commit 3a8ecc935efabdad106b5e06d07b150c394b4465 ]

Commit 7fd8930f26be4

"nvme: add a common helper to read Identify Controller data"

has re-introduced an issue that we have attempted to work around in the past, in commit a310acd7a7ea ("NVMe: use split lo_hi_{read,write}q").

The problem is that some PCIe NVMe controllers do not implement 64-bit outbound accesses correctly, which is why the commit above switched to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in the code.

In the mean time, the NVMe subsystem has been refactored, and now calls into the PCIe support layer for NVMe via a .reg_read64() method, which fails to use lo_hi_readq(), and thus reintroduces the problem that the workaround above aimed to address.

Given that, at the moment, .reg_read64() is only used to read the capability register [which is known to tolerate split reads], let's switch .reg_read64() to lo_hi_readq() as well.

This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys DesignWare PCIe host controller.

Fixes 7fd8930f26be4 ("nvme: add a common helper to read Identify Controller data")
---
 drivers/nvme/host/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nvme/host/pci.c +1 -1
index 1ac4cec5f4f7..e2bce9385eda 100644
@@ -1863,7 +1863,7 @@ static int nvme_pci_reg_write32(struct nvme_ctrl *ctrl, u32 off, u32 val)
 
 static int nvme_pci_reg_read64(struct nvme_ctrl *ctrl, u32 off, u64 *val)
 {
-	*val = readq(to_nvme_dev(ctrl)->bar + off);
+	*val = lo_hi_readq(to_nvme_dev(ctrl)->bar + off);
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#125 lore raw

PATCH 166/251 RDMA/hns: Fixs hw access invalid dma memory error

In reply to Sasha Levin

From: Xi Wang <[email protected]>

[ Upstream commit ec5bc2cc69b4fc494e04d10fc5226f6f9cf67c56 ]

When smmu is enable, if execute the perftest command and then use 'kill -9' to exit, follow this operation repeatedly, the kernel will have a high probability to print the following smmu event:

arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:

  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the next reset.

This patch fixed it by removing the action that release qpc memory in the 'hns_roce_qp_free' function.

Fixes 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
---
 drivers/infiniband/hw/hns/hns_roce_qp.c | 1 -
 1 file changed, 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_qp.c +0 -1
index 33cf1035030b..6f3c0ea99dd0 100644
@@ -241,7 +241,6 @@ void hns_roce_qp_free(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp)
 
 	if ((hr_qp->ibqp.qp_type) != IB_QPT_GSI) {
 		hns_roce_table_put(hr_dev, &qp_table->irrl_table, hr_qp->qpn);
-		hns_roce_table_put(hr_dev, &qp_table->qp_table, hr_qp->qpn);
 	}
 }
 
Signature · 1 line
2.20.1
author maintainer
#165 lore raw

PATCH 205/251 net: stmmac: dwmac-meson8b: Fix signedness bug in probe

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit f10210517a2f37feea2edf85eb34c98977265c16 ]

The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered.

Fixes 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +1 -1
index f356a44bcb81..6704d3e0392d 100644
@@ -280,7 +280,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
 
 	dwmac->pdev = pdev;
 	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
-	if (dwmac->phy_mode < 0) {
+	if ((int)dwmac->phy_mode < 0) {
 		dev_err(&pdev->dev, "missing phy-mode property\n");
 		ret = -EINVAL;
 		goto err_remove_config_dt;
Signature · 1 line
2.20.1
author maintainer
#163 lore raw

PATCH 203/251 net: hisilicon: Fix signedness bug in hix5hd2_dev_probe()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 002dfe8085255b7bf1e0758c3d195c5412d35be9 ]

The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger.

Fixes 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
---
 drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/hisilicon/hix5hd2_gmac.c +1 -1
index e69a6bed31a9..dd24c352b200 100644
@@ -929,7 +929,7 @@ static int hix5hd2_dev_probe(struct platform_device *pdev)
 		goto err_free_mdio;
 
 	priv->phy_mode = of_get_phy_mode(node);
-	if (priv->phy_mode < 0) {
+	if ((int)priv->phy_mode < 0) {
 		netdev_err(ndev, "not find phy-mode\n");
 		ret = -EINVAL;
 		goto err_mdiobus;
Signature · 1 line
2.20.1
author maintainer
#161 lore raw

PATCH 201/251 net/rds: Fix 'ib_evt_handler_call' element in 'rds_ib_stat_names'

In reply to Sasha Levin

From: Gerd Rausch <[email protected]>

[ Upstream commit 05a82481a3024b94db00b8c816bb3d526b5209e0 ]

All entries in 'rds_ib_stat_names' are stringified versions of the corresponding "struct rds_ib_statistics" element without the "s_"-prefix.

Fix entry 'ib_evt_handler_call' to do the same.

Fixes f4f943c958a2 ("RDS: IB: ack more receive completions to improve performance")
---
 net/rds/ib_stats.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/rds/ib_stats.c +1 -1
index 7e78dca1f252..aaf4b3d10203 100644
@@ -42,7 +42,7 @@ DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats);
 static const char *const rds_ib_stat_names[] = {
 	"ib_connect_raced",
 	"ib_listen_closed_stale",
-	"s_ib_evt_handler_call",
+	"ib_evt_handler_call",
 	"ib_tasklet_call",
 	"ib_tx_cq_event",
 	"ib_tx_ring_full",
Signature · 1 line
2.20.1
author maintainer
#159 lore raw

PATCH 199/251 hwmon: (shtc1) fix shtc1 and shtw1 id mask

In reply to Sasha Levin

From: Dan Robertson <[email protected]>

[ Upstream commit fdc7d8e829ec755c5cfb2f5a8d8c0cdfb664f895 ]

Fix an error in the bitmaskfor the shtc1 and shtw1 bitmask used to retrieve the chip ID from the ID register. See section 5.7 of the shtw1 or shtc1 datasheet for details.

Fixes 1a539d372edd9832444e7a3daa710c444c014dc9 ("hwmon: add support for Sensirion SHTC1 sensor")
[groeck: Reordered to be first in series and adjusted accordingly]
---
 drivers/hwmon/shtc1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/shtc1.c +1 -1
index decd7df995ab..2a18539591ea 100644
@@ -38,7 +38,7 @@ static const unsigned char shtc1_cmd_read_id_reg[]	       = { 0xef, 0xc8 };
 
 /* constants for reading the ID register */
 #define SHTC1_ID	  0x07
-#define SHTC1_ID_REG_MASK 0x1f
+#define SHTC1_ID_REG_MASK 0x3f
 
 /* delays for non-blocking i2c commands, both in us */
 #define SHTC1_NONBLOCKING_WAIT_TIME_HPM  14400
Signature · 1 line
2.20.1
author maintainer
#158 lore raw

PATCH 198/251 Btrfs: fix hang when loading existing inode cache off disk

In reply to Sasha Levin

From: Filipe Manana <[email protected]>

[ Upstream commit 7764d56baa844d7f6206394f21a0e8c1f303c476 ]

If we are able to load an existing inode cache off disk, we set the state of the cache to BTRFS_CACHE_FINISHED, but we don't wake up any one waiting for the cache to be available. This means that anyone waiting for the cache to be available, waiting on the condition that either its state is BTRFS_CACHE_FINISHED or its available free space is greather than zero, can hang forever.

This could be observed running fstests with MOUNT_OPTIONS="-o inode_cache", in particular test case generic/161 triggered it very frequently for me, producing a trace like the following:

  [63795.739712] BTRFS info (device sdc): enabling inode map caching
  [63795.739714] BTRFS info (device sdc): disk space caching is enabled
  [63795.739716] BTRFS info (device sdc): has skinny extents
  [64036.653886] INFO: task btrfs-transacti:3917 blocked for more than 120 seconds.
  [64036.654079]       Not tainted 5.2.0-rc4-btrfs-next-50 #1
  [64036.654143] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [64036.654232] btrfs-transacti D    0  3917      2 0x80004000
  [64036.654239] Call Trace:
  [64036.654258]  ? __schedule+0x3ae/0x7b0
  [64036.654271]  schedule+0x3a/0xb0
  [64036.654325]  btrfs_commit_transaction+0x978/0xae0 [btrfs]
  [64036.654339]  ? remove_wait_queue+0x60/0x60
  [64036.654395]  transaction_kthread+0x146/0x180 [btrfs]
  [64036.654450]  ? btrfs_cleanup_transaction+0x620/0x620 [btrfs]
  [64036.654456]  kthread+0x103/0x140
  [64036.654464]  ? kthread_create_worker_on_cpu+0x70/0x70
  [64036.654476]  ret_from_fork+0x3a/0x50
  [64036.654504] INFO: task xfs_io:3919 blocked for more than 120 seconds.
  [64036.654568]       Not tainted 5.2.0-rc4-btrfs-next-50 #1
  [64036.654617] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [64036.654685] xfs_io          D    0  3919   3633 0x00000000
  [64036.654691] Call Trace:
  [64036.654703]  ? __schedule+0x3ae/0x7b0
  [64036.654716]  schedule+0x3a/0xb0
  [64036.654756]  btrfs_find_free_ino+0xa9/0x120 [btrfs]
  [64036.654764]  ? remove_wait_queue+0x60/0x60
  [64036.654809]  btrfs_create+0x72/0x1f0 [btrfs]
  [64036.654822]  lookup_open+0x6bc/0x790
  [64036.654849]  path_openat+0x3bc/0xc00
  [64036.654854]  ? __lock_acquire+0x331/0x1cb0
  [64036.654869]  do_filp_open+0x99/0x110
  [64036.654884]  ? __alloc_fd+0xee/0x200
  [64036.654895]  ? do_raw_spin_unlock+0x49/0xc0
  [64036.654909]  ? do_sys_open+0x132/0x220
  [64036.654913]  do_sys_open+0x132/0x220
  [64036.654926]  do_syscall_64+0x60/0x1d0
  [64036.654933]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a wake_up() call right after setting the cache state to BTRFS_CACHE_FINISHED, at start_caching(), when we are able to load the cache from disk.

Fixes 82d5902d9c681b ("Btrfs: Support reading/writing on disk free ino cache")
---
 fs/btrfs/inode-map.c | 1 +
 1 file changed, 1 insertion(+)
fs/btrfs/inode-map.c +1 -0
index d27014b8bf72..075b59516c8c 100644
@@ -159,6 +159,7 @@ static void start_caching(struct btrfs_root *root)
 		spin_lock(&root->ino_cache_lock);
 		root->ino_cache_state = BTRFS_CACHE_FINISHED;
 		spin_unlock(&root->ino_cache_lock);
+		wake_up(&root->ino_cache_wait);
 		return;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#151 lore raw

PATCH 191/251 power: supply: Init device wakeup after device_add()

In reply to Sasha Levin

From: Stephen Boyd <[email protected]>

[ Upstream commit 8288022284859acbcc3cf1a073a1e2692d6c2543 ]

We may want to use the device pointer in device_init_wakeup() with functions that expect the device to already be added with device_add(). For example, if we were to link the device initializing wakeup to something in sysfs such as a class for wakeups we'll run into an error. It looks like this code was written with the assumption that the device would be added before initializing wakeup due to the order of operations in power_supply_unregister().

Let's change the order of operations so we don't run into problems here.

Fixes 948dcf966228 ("power_supply: Prevent suspend until power supply events are processed")
Cc Greg Kroah-Hartman <[email protected]>
Cc Tri Vo <[email protected]>
Cc Kalesh Singh <[email protected]>
Cc Ravi Chandra Sadineni <[email protected]>
Cc Viresh Kumar <[email protected]>
---
 drivers/power/supply/power_supply_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/power/supply/power_supply_core.c +5 -5
index 9e05ae0430a9..cb0b3d3d132f 100644
@@ -764,14 +764,14 @@ __power_supply_register(struct device *parent,
 	}
 
 	spin_lock_init(&psy->changed_lock);
-	rc = device_init_wakeup(dev, ws);
-	if (rc)
-		goto wakeup_init_failed;
-
 	rc = device_add(dev);
 	if (rc)
 		goto device_add_failed;
 
+	rc = device_init_wakeup(dev, ws);
+	if (rc)
+		goto wakeup_init_failed;
+
 	rc = psy_register_thermal(psy);
 	if (rc)
 		goto register_thermal_failed;
@@ -808,8 +808,8 @@ __power_supply_register(struct device *parent,
 	psy_unregister_thermal(psy);
 register_thermal_failed:
 	device_del(dev);
-device_add_failed:
 wakeup_init_failed:
+device_add_failed:
 check_supplies_failed:
 dev_set_name_failed:
 	put_device(dev);
Signature · 1 line
2.20.1
author maintainer
#150 lore raw

PATCH 190/251 hwmon: (lm75) Fix write operations for negative temperatures

In reply to Sasha Levin

From: Guenter Roeck <[email protected]>

[ Upstream commit 7d82fcc9d9e81241778aaa22fda7be753e237d86 ]

Writes into limit registers fail if the temperature written is negative. The regmap write operation checks the value range, regmap_write accepts an unsigned int as parameter, and the temperature value passed to regmap_write is kept in a variable declared as long. Negative values are converted large unsigned integers, which fails the range check. Fix by type casting the temperature to u16 when calling regmap_write().

Cc Iker Perez del Palomar Sustatxa <[email protected]>
Fixes e65365fed87f ("hwmon: (lm75) Convert to use regmap")
---
 drivers/hwmon/lm75.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/lm75.c +1 -1
index eff3b24d8473..fc31669a86ba 100644
@@ -164,7 +164,7 @@ static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
 	temp = DIV_ROUND_CLOSEST(temp  << (resolution - 8),
 				 1000) << (16 - resolution);
 
-	return regmap_write(data->regmap, reg, temp);
+	return regmap_write(data->regmap, reg, (u16)temp);
 }
 
 static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
Signature · 1 line
2.20.1
author maintainer
#148 lore raw

PATCH 188/251 ahci: Do not export local variable ahci_em_messages

In reply to Sasha Levin

From: Andy Shevchenko <[email protected]>

[ Upstream commit 60fc35f327e0a9e60b955c0f3c3ed623608d1baa ]

The commit ed08d40cdec4
("ahci: Changing two module params with static and __read_mostly")
moved ahci_em_messages to be static while missing the fact of exporting it.

WARNING: "ahci_em_messages" [vmlinux] is a static EXPORT_SYMBOL_GPL

Drop export for the local variable ahci_em_messages.

Fixes ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly")
Cc Chuansheng Liu <[email protected]>
---
 drivers/ata/libahci.c | 1 -
 1 file changed, 1 deletion(-)
drivers/ata/libahci.c +0 -1
index f233ce60a678..1610fff19bb3 100644
@@ -190,7 +190,6 @@ struct ata_port_operations ahci_pmp_retry_srst_ops = {
 EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
 
 static bool ahci_em_messages __read_mostly = true;
-EXPORT_SYMBOL_GPL(ahci_em_messages);
 module_param(ahci_em_messages, bool, 0444);
 /* add other LED protocol types when they become supported */
 MODULE_PARM_DESC(ahci_em_messages,
Signature · 1 line
2.20.1
author maintainer
#147 lore raw

PATCH 187/251 mips: avoid explicit UB in assignment of mips_io_port_base

In reply to Sasha Levin

From: Nick Desaulniers <[email protected]>

[ Upstream commit 12051b318bc3ce5b42d6d786191008284b067d83 ]

The code in question is modifying a variable declared const through pointer manipulation. Such code is explicitly undefined behavior, and is the lone issue preventing malta_defconfig from booting when built with Clang:

If an attempt is made to modify an object defined with a const-qualified type through use of an lvalue with non-const-qualified type, the behavior is undefined.

LLVM is removing such assignments. A simple fix is to not declare variables const that you plan on modifying. Limiting the scope would be a better method of preventing unwanted writes to such a variable.

Further, the code in question mentions "compiler bugs" without any links to bug reports, so it is difficult to know if the issue is resolved in GCC. The patch was authored in 2006, which would have been GCC 4.0.3 or 4.1.1. The minimal supported version of GCC in the Linux kernel is currently 4.6.

For what its worth, there was UB before the commit in question, it just added a barrier and got lucky IRT codegen. I don't think there's any actual compiler bugs related, just runtime bugs due to UB.

---
 arch/mips/include/asm/io.h | 14 ++------------
 arch/mips/kernel/setup.c   |  2 +-
 2 files changed, 3 insertions(+), 13 deletions(-)
arch/mips/include/asm/io.h +2 -12
index 06049b6b3ddd..5dfae80264b9 100644
@@ -60,21 +60,11 @@
  * instruction, so the lower 16 bits must be zero.  Should be true on
  * on any sane architecture; generic code does not use this assumption.
  */
-extern const unsigned long mips_io_port_base;
+extern unsigned long mips_io_port_base;
 
-/*
- * Gcc will generate code to load the value of mips_io_port_base after each
- * function call which may be fairly wasteful in some cases.  So we don't
- * play quite by the book.  We tell gcc mips_io_port_base is a long variable
- * which solves the code generation issue.  Now we need to violate the
- * aliasing rules a little to make initialization possible and finally we
- * will need the barrier() to fight side effects of the aliasing chat.
- * This trickery will eventually collapse under gcc's optimizer.  Oh well.
- */
 static inline void set_io_port_base(unsigned long base)
 {
-	* (unsigned long *) &mips_io_port_base = base;
-	barrier();
+	mips_io_port_base = base;
 }
 
 /*
arch/mips/kernel/setup.c +1 -1
index 695950361d2a..7cc1d29334ee 100644
@@ -74,7 +74,7 @@ static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
  */
-const unsigned long mips_io_port_base = -1;
+unsigned long mips_io_port_base = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
 static struct resource code_resource = { .name = "Kernel code", };
Signature · 1 line
2.20.1
author maintainer
#108 lore raw

PATCH 149/251 signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

In reply to Sasha Levin

From: "Eric W. Biederman" <[email protected]>

[ Upstream commit 72abe3bcf0911d69b46c1e8bdb5612675e0ac42c ]

The locking in force_sig_info is not prepared to deal with a task that exits or execs (as sighand may change). The is not a locking problem in force_sig as force_sig is only built to handle synchronous exceptions.

Further the function force_sig_info changes the signal state if the signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the delivery of the signal. The signal SIGKILL can not be ignored and can not be blocked and SIGNAL_UNKILLABLE won't prevent it from being delivered.

So using force_sig rather than send_sig for SIGKILL is confusing and pointless.

Because it won't impact the sending of the signal and and because using force_sig is wrong, replace force_sig with send_sig.

Cc Namjae Jeon <[email protected]>
Cc Jeff Layton <[email protected]>
Cc Steve French <[email protected]>
Fixes a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
Fixes e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code")
---
 fs/cifs/connect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/connect.c +1 -1
index e43ba6db2bdd..110febd69737 100644
@@ -2221,7 +2221,7 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect)
 
 	task = xchg(&server->tsk, NULL);
 	if (task)
-		force_sig(SIGKILL, task);
+		send_sig(SIGKILL, task, 1);
 }
 
 static struct TCP_Server_Info *
Signature · 1 line
2.20.1
author maintainer
#146 lore raw

PATCH 186/251 mac80211: minstrel_ht: fix per-group max throughput rate initialization

In reply to Sasha Levin

From: Felix Fietkau <[email protected]>

[ Upstream commit 56dd918ff06e3ee24d8067e93ed12b2a39e71394 ]

The group number needs to be multiplied by the number of rates per group to get the full rate index

Fixes 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability")
---
 net/mac80211/rc80211_minstrel_ht.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/rc80211_minstrel_ht.c +1 -1
index 593184d14b3e..e1b0e26c1f17 100644
@@ -547,7 +547,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
 
 		/* (re)Initialize group rate indexes */
 		for(j = 0; j < MAX_THR_RATES; j++)
-			tmp_group_tp_rate[j] = group;
+			tmp_group_tp_rate[j] = MCS_GROUP_RATES * group;
 
 		for (i = 0; i < MCS_GROUP_RATES; i++) {
 			if (!(mg->supported & BIT(i)))
Signature · 1 line
2.20.1
author maintainer
#132 lore raw

PATCH 173/251 x86/kgbd: Use NMI_VECTOR not APIC_DM_NMI

In reply to Sasha Levin

From: Thomas Gleixner <[email protected]>

[ Upstream commit 2591bc4e8d70b4e1330d327fb7e3921f4e070a51 ]

apic->send_IPI_allbutself() takes a vector number as argument.

APIC_DM_NMI is clearly not a vector number. It's defined to 0x400 which is outside the vector space.

Use NMI_VECTOR instead as that's what it is intended to be.

---
 arch/x86/kernel/kgdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/kgdb.c +1 -1
index 8e36f249646e..904e18bb38c5 100644
@@ -438,7 +438,7 @@ static void kgdb_disable_hw_debug(struct pt_regs *regs)
  */
 void kgdb_roundup_cpus(unsigned long flags)
 {
-	apic->send_IPI_allbutself(APIC_DM_NMI);
+	apic->send_IPI_allbutself(NMI_VECTOR);
 }
 #endif
 
Signature · 1 line
2.20.1
author maintainer
#131 lore raw

PATCH 172/251 mic: avoid statically declaring a 'struct device'.

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit bc83f79bd2119230888fb8574639d5a51b38f903 ]

Generally, declaring a platform device as a static variable is a bad idea and can cause all kinds of problems, in particular with the DMA configuration and lifetime rules.

A specific problem we hit here is from a bug in clang that warns about certain (otherwise valid) macros when used in static variables:

drivers/misc/mic/card/mic_x100.c:285:27: warning: shift count >= width of type [-Wshift-count-overflow]

static u64 mic_dma_mask = DMA_BIT_MASK(64);
                          ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                     ^ ~~~

A slightly better way here is to create the platform device dynamically and set the dma mask in the probe function.
This avoids the warning and some other problems, but is still not ideal because the device creation should really be separated from the driver, and the fact that the device has no parent means we have to force the dma mask rather than having it set up from the bus that the device is actually on.

Fixes dd8d8d44df64 ("misc: mic: MIC card driver specific changes to enable SCIF")
---
 drivers/misc/mic/card/mic_x100.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/misc/mic/card/mic_x100.c +12 -16
index b9f0710ffa6b..4007adc666f3 100644
@@ -249,6 +249,9 @@ static int __init mic_probe(struct platform_device *pdev)
 	mdrv->dev = &pdev->dev;
 	snprintf(mdrv->name, sizeof(mic_driver_name), mic_driver_name);
 
+	/* FIXME: use dma_set_mask_and_coherent() and check result */
+	dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+
 	mdev->mmio.pa = MIC_X100_MMIO_BASE;
 	mdev->mmio.len = MIC_X100_MMIO_LEN;
 	mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE,
@@ -294,18 +297,6 @@ static void mic_platform_shutdown(struct platform_device *pdev)
 	mic_remove(pdev);
 }
 
-static u64 mic_dma_mask = DMA_BIT_MASK(64);
-
-static struct platform_device mic_platform_dev = {
-	.name = mic_driver_name,
-	.id   = 0,
-	.num_resources = 0,
-	.dev = {
-		.dma_mask = &mic_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-	},
-};
-
 static struct platform_driver __refdata mic_platform_driver = {
 	.probe = mic_probe,
 	.remove = mic_remove,
@@ -315,6 +306,8 @@ static struct platform_driver __refdata mic_platform_driver = {
 	},
 };
 
+static struct platform_device *mic_platform_dev;
+
 static int __init mic_init(void)
 {
 	int ret;
@@ -328,9 +321,12 @@ static int __init mic_init(void)
 
 	request_module("mic_x100_dma");
 	mic_init_card_debugfs();
-	ret = platform_device_register(&mic_platform_dev);
+
+	mic_platform_dev = platform_device_register_simple(mic_driver_name,
+							   0, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(mic_platform_dev);
 	if (ret) {
-		pr_err("platform_device_register ret %d\n", ret);
+		pr_err("platform_device_register_full ret %d\n", ret);
 		goto cleanup_debugfs;
 	}
 	ret = platform_driver_register(&mic_platform_driver);
@@ -341,7 +337,7 @@ static int __init mic_init(void)
 	return ret;
 
 device_unregister:
-	platform_device_unregister(&mic_platform_dev);
+	platform_device_unregister(mic_platform_dev);
 cleanup_debugfs:
 	mic_exit_card_debugfs();
 done:
@@ -351,7 +347,7 @@ static int __init mic_init(void)
 static void __exit mic_exit(void)
 {
 	platform_driver_unregister(&mic_platform_driver);
-	platform_device_unregister(&mic_platform_dev);
+	platform_device_unregister(mic_platform_dev);
 	mic_exit_card_debugfs();
 }
 
Signature · 1 line
2.20.1
author maintainer
#129 lore raw

PATCH 170/251 qed: reduce maximum stack frame size

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 7c116e02a4a7575c8c62bfd2106e3e3ec8fb99dc ]

clang warns about an overly large stack frame in one function when it decides to inline all __qed_get_vport_*() functions into __qed_get_vport_stats():

drivers/net/ethernet/qlogic/qed/qed_l2.c:1889:13: error: stack frame size of 1128 bytes in function '_qed_get_vport_stats' [-Werror,-Wframe-larger-than=]

Use a noinline_for_stack annotation to prevent clang from inlining these, which keeps the maximum stack usage at around half of that in the worst case, similar to what we get with gcc.

Fixes 86622ee75312 ("qed: Move statistics to L2 code")
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 34 +++++++++++-------------
 1 file changed, 15 insertions(+), 19 deletions(-)
drivers/net/ethernet/qlogic/qed/qed_l2.c +15 -19
index 715776e2cfe5..2d198f6ee21d 100644
@@ -1328,10 +1328,9 @@ static void __qed_get_vport_pstats_addrlen(struct qed_hwfn *p_hwfn,
 	}
 }
 
-static void __qed_get_vport_pstats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack void
+__qed_get_vport_pstats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct eth_pstorm_per_queue_stat pstats;
 	u32 pstats_addr = 0, pstats_len = 0;
@@ -1351,10 +1350,9 @@ static void __qed_get_vport_pstats(struct qed_hwfn *p_hwfn,
 	p_stats->tx_err_drop_pkts += HILO_64_REGPAIR(pstats.error_drop_pkts);
 }
 
-static void __qed_get_vport_tstats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack void
+__qed_get_vport_tstats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct tstorm_per_port_stat tstats;
 	u32 tstats_addr, tstats_len;
@@ -1397,10 +1395,9 @@ static void __qed_get_vport_ustats_addrlen(struct qed_hwfn *p_hwfn,
 	}
 }
 
-static void __qed_get_vport_ustats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack
+void __qed_get_vport_ustats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			    struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct eth_ustorm_per_queue_stat ustats;
 	u32 ustats_addr = 0, ustats_len = 0;
@@ -1436,10 +1433,9 @@ static void __qed_get_vport_mstats_addrlen(struct qed_hwfn *p_hwfn,
 	}
 }
 
-static void __qed_get_vport_mstats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack void
+__qed_get_vport_mstats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct eth_mstorm_per_queue_stat mstats;
 	u32 mstats_addr = 0, mstats_len = 0;
@@ -1463,9 +1459,9 @@ static void __qed_get_vport_mstats(struct qed_hwfn *p_hwfn,
 		HILO_64_REGPAIR(mstats.tpa_coalesced_bytes);
 }
 
-static void __qed_get_vport_port_stats(struct qed_hwfn *p_hwfn,
-				       struct qed_ptt *p_ptt,
-				       struct qed_eth_stats *p_stats)
+static noinline_for_stack void
+__qed_get_vport_port_stats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			   struct qed_eth_stats *p_stats)
 {
 	struct port_stats port_stats;
 	int j;
Signature · 1 line
2.20.1
author maintainer
#128 lore raw

PATCH 169/251 libertas_tf: Use correct channel range in lbtf_geo_init

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 2ec4ad49b98e4a14147d04f914717135eca7c8b1 ]

It seems we should use 'range' instead of 'priv->range' in lbtf_geo_init(), because 'range' is the corret one related to current regioncode.

Fixes 691cdb49388b ("libertas_tf: command helper functions for libertas_tf")
---
 drivers/net/wireless/marvell/libertas_tf/cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/marvell/libertas_tf/cmd.c +1 -1
index 909ac3685010..2b193f1257a5 100644
@@ -69,7 +69,7 @@ static void lbtf_geo_init(struct lbtf_private *priv)
 			break;
 		}
 
-	for (ch = priv->range.start; ch < priv->range.end; ch++)
+	for (ch = range->start; ch < range->end; ch++)
 		priv->channels[CHAN_TO_IDX(ch)].flags = 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#127 lore raw

PATCH 168/251 scsi: libfc: fix null pointer dereference on a null lport

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit 41a6bf6529edd10a6def42e3b2c34a7474bcc2f5 ]

Currently if lport is null then the null lport pointer is dereference when printing out debug via the FC_LPORT_DB macro. Fix this by using the more generic FC_LIBFC_DBG debug macro instead that does not use lport.

Addresses-Coverity: ("Dereference after null check")

Fixes 7414705ea4ae ("libfc: Add runtime debugging with debug_logging module parameter")
---
 drivers/scsi/libfc/fc_exch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/libfc/fc_exch.c +1 -1
index 16ca31ad5ec0..d0a86ef80652 100644
@@ -2506,7 +2506,7 @@ void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
 
 	/* lport lock ? */
 	if (!lport || lport->state == LPORT_ST_DISABLED) {
-		FC_LPORT_DBG(lport, "Receiving frames for an lport that "
+		FC_LIBFC_DBG("Receiving frames for an lport that "
 			     "has not been initialized correctly\n");
 		fc_frame_free(fp);
 		return;
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 128/251 net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry

In reply to Sasha Levin

From: Sameeh Jubran <[email protected]>

[ Upstream commit 3c6eeff295f01bdf1c6c3addcb0a04c0c6c029e9 ]

second parameter should be the index of the table rather than the value.

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/amazon/ena/ena_ethtool.c +2 -2
index 67b2338f8fb3..06fd061a20e9 100644
@@ -697,8 +697,8 @@ static int ena_set_rxfh(struct net_device *netdev, const u32 *indir,
 	if (indir) {
 		for (i = 0; i < ENA_RX_RSS_TABLE_SIZE; i++) {
 			rc = ena_com_indirect_table_fill_entry(ena_dev,
-							       ENA_IO_RXQ_IDX(indir[i]),
-							       i);
+							       i,
+							       ENA_IO_RXQ_IDX(indir[i]));
 			if (unlikely(rc)) {
 				netif_err(adapter, drv, netdev,
 					  "Cannot fill indirect table (index is too large)\n");
Signature · 1 line
2.20.1
author maintainer
#124 lore raw

PATCH 165/251 devres: allow const resource arguments

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 9dea44c91469512d346e638694c22c30a5273992 ]

devm_ioremap_resource() does not currently take 'const' arguments, which results in a warning from the first driver trying to do it anyway:

drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

  priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
                                                 ^~~~~~~~~~~~~~~~~~~

Change the prototype to allow it, as there is no real reason not to.

---
 include/linux/device.h | 3 ++-
 lib/devres.c           | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
include/linux/device.h +2 -1
index 8d732965fab7..eb865b461acc 100644
@@ -682,7 +682,8 @@ extern unsigned long devm_get_free_pages(struct device *dev,
 					 gfp_t gfp_mask, unsigned int order);
 extern void devm_free_pages(struct device *dev, unsigned long addr);
 
-void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);
+void __iomem *devm_ioremap_resource(struct device *dev,
+				    const struct resource *res);
 
 /* allows to add/remove a custom action to devres stack */
 int devm_add_action(struct device *dev, void (*action)(void *), void *data);
lib/devres.c +2 -1
index cb1464c411a2..38912892053c 100644
@@ -131,7 +131,8 @@ EXPORT_SYMBOL(devm_iounmap);
  *	if (IS_ERR(base))
  *		return PTR_ERR(base);
  */
-void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res)
+void __iomem *devm_ioremap_resource(struct device *dev,
+				    const struct resource *res)
 {
 	resource_size_t size;
 	const char *name;
Signature · 1 line
2.20.1
author maintainer
#119 lore raw

PATCH 160/251 dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"

In reply to Sasha Levin

From: Andy Shevchenko <[email protected]>

[ Upstream commit c24a5c735f87d0549060de31367c095e8810b895 ]

The commit

080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")

has been mistakenly submitted. The further investigations show that the original code does better job since the memory side transfer size has never been configured by DMA users.

As per latest revision of documentation: "Channel minimum transfer size (CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and minimum value that can be programmed is 1."

This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16.

Fixes 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")
---
 drivers/dma/hsu/hsu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/hsu/hsu.c +2 -2
index 29d04ca71d52..15525a2b8ebd 100644
@@ -64,10 +64,10 @@ static void hsu_dma_chan_start(struct hsu_dma_chan *hsuc)
 
 	if (hsuc->direction == DMA_MEM_TO_DEV) {
 		bsr = config->dst_maxburst;
-		mtsr = config->src_addr_width;
+		mtsr = config->dst_addr_width;
 	} else if (hsuc->direction == DMA_DEV_TO_MEM) {
 		bsr = config->src_maxburst;
-		mtsr = config->dst_addr_width;
+		mtsr = config->src_addr_width;
 	}
 
 	hsu_chan_disable(hsuc);
Signature · 1 line
2.20.1
author maintainer
#118 lore raw

PATCH 159/251 perf/ioctl: Add check for the sample_period value

In reply to Sasha Levin

From: Ravi Bangoria <[email protected]>

[ Upstream commit 913a90bc5a3a06b1f04c337320e9aeee2328dd77 ]

perf_event_open() limits the sample_period to 63 bits. See:

0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")

Make ioctl() consistent with it.

Also on PowerPC, negative sample_period could cause a recursive PMIs leading to a hang (reported when running perf-fuzzer).

Cc Alexander Shishkin <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Vince Weaver <[email protected]>
Fixes 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
---
 kernel/events/core.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/events/core.c +3 -0
index 5bbf7537a612..64ace5e9af2a 100644
@@ -4624,6 +4624,9 @@ static int perf_event_period(struct perf_event *event, u64 __user *arg)
 	if (perf_event_check_period(event, value))
 		return -EINVAL;
 
+	if (!event->attr.freq && (value & (1ULL << 63)))
+		return -EINVAL;
+
 	event_function_call(event, __perf_event_period, &value);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#113 lore raw

PATCH 154/251 net: netem: fix backlog accounting for corrupted GSO frames

In reply to Sasha Levin

From: Jakub Kicinski <[email protected]>

[ Upstream commit 177b8007463c4f36c9a2c7ce7aa9875a4cad9bd5 ]

When GSO frame has to be corrupted netem uses skb_gso_segment() to produce the list of frames, and re-enqueues the segments one by one. The backlog length has to be adjusted to account for new frames.

The current calculation is incorrect, leading to wrong backlog lengths in the parent qdisc (both bytes and packets), and incorrect packet backlog count in netem itself.

Parent backlog goes negative, netem's packet backlog counts all non-first segments twice (thus remaining non-zero even after qdisc is emptied).

Move the variables used to count the adjustment into local scope to make 100% sure they aren't used at any stage in backports.

Fixes 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
---
 net/sched/sch_netem.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
net/sched/sch_netem.c +8 -5
index 95002e56fa48..308d92491757 100644
@@ -437,8 +437,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct netem_skb_cb *cb;
 	struct sk_buff *skb2;
 	struct sk_buff *segs = NULL;
-	unsigned int len = 0, last_len, prev_len = qdisc_pkt_len(skb);
-	int nb = 0;
+	unsigned int prev_len = qdisc_pkt_len(skb);
 	int count = 1;
 	int rc = NET_XMIT_SUCCESS;
 	int rc_drop = NET_XMIT_DROP;
@@ -495,6 +494,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 			segs = netem_segment(skb, sch, to_free);
 			if (!segs)
 				return rc_drop;
+			qdisc_skb_cb(segs)->pkt_len = segs->len;
 		} else {
 			segs = skb;
 		}
@@ -585,6 +585,11 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 
 finish_segs:
 	if (segs) {
+		unsigned int len, last_len;
+		int nb = 0;
+
+		len = skb->len;
+
 		while (segs) {
 			skb2 = segs->next;
 			segs->next = NULL;
@@ -600,9 +605,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 			}
 			segs = skb2;
 		}
-		sch->q.qlen += nb;
-		if (nb > 1)
-			qdisc_tree_reduce_backlog(sch, 1 - nb, prev_len - len);
+		qdisc_tree_reduce_backlog(sch, -nb, prev_len - len);
 	}
 	return NET_XMIT_SUCCESS;
 }
Signature · 1 line
2.20.1
author maintainer
#110 lore raw

PATCH 151/251 media: vivid: fix incorrect assignment operation when setting video mode

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit d4ec9550e4b2d2e357a46fdc65d8ef3d4d15984c ]

The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment, otherwise the previous clearing of the FB_VMODE_MASK bits of var->vmode makes no sense and is redundant.

Addresses-Coverity: ("Unused value")

Fixes ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing")
---
 drivers/media/platform/vivid/vivid-osd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/vivid/vivid-osd.c +1 -1
index bdc380b14e0c..a95b7c56569e 100644
@@ -167,7 +167,7 @@ static int _vivid_fb_check_var(struct fb_var_screeninfo *var, struct vivid_dev *
 	var->nonstd = 0;
 
 	var->vmode &= ~FB_VMODE_MASK;
-	var->vmode = FB_VMODE_NONINTERLACED;
+	var->vmode |= FB_VMODE_NONINTERLACED;
 
 	/* Dummy values */
 	var->hsync_len = 24;
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 118/251 ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect

In reply to Sasha Levin

From: Vladimir Oltean <[email protected]>

[ Upstream commit c7861adbe37f576931650ad8ef805e0c47564b9a ]

Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus. But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC are pointing towards the same internal PCS. Therefore nobody is controlling the internal PCS of eTSEC0.

Upon initial ndo_open, the SGMII link is ok by virtue of U-boot initialization. But upon an ifdown/ifup sequence, the code path from ndo_open -> init_phy -> gfar_configure_serdes does not get executed for the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII link remains down for eTSEC0. On the LS1021A-TWR board, to signal this failure condition, the PHY driver keeps printing '803x_aneg_done: SGMII link is not ok'.

Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match mdio1 device.

Fixes 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
---
 arch/arm/boot/dts/ls1021a-twr.dts |  9 ++++++++-
 arch/arm/boot/dts/ls1021a.dtsi    | 11 ++++++++++-
 2 files changed, 18 insertions(+), 2 deletions(-)
arch/arm/boot/dts/ls1021a-twr.dts +8 -1
index 44715c8ef756..72a3fc63d0ec 100644
@@ -143,7 +143,7 @@
 };
 
 &enet0 {
-	tbi-handle = <&tbi1>;
+	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
 	phy-connection-type = "sgmii";
 	status = "okay";
@@ -222,6 +222,13 @@
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
 	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
 	tbi1: tbi-phy@1f {
 		reg = <0x1f>;
 		device_type = "tbi-phy";
arch/arm/boot/dts/ls1021a.dtsi +10 -1
index 825f6eae3d1c..27133c3a4b12 100644
@@ -505,13 +505,22 @@
 		};
 
 		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
+			compatible = "fsl,etsec2-mdio";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		mdio1: mdio@2d64000 {
+			compatible = "fsl,etsec2-mdio";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
 		ptp_clock@2d10e00 {
 			compatible = "fsl,etsec-ptp";
 			reg = <0x0 0x2d10e00 0x0 0xb0>;
Signature · 1 line
2.20.1
author maintainer
#106 lore raw

PATCH 147/251 misc: sgi-xp: Properly initialize buf in xpc_get_rsvd_page_pa

In reply to Sasha Levin

From: Nathan Chancellor <[email protected]>

[ Upstream commit b0576f9ecb5c51e9932531d23c447b2739261841 ]

Clang warns:

drivers/misc/sgi-xp/xpc_partition.c:73:14: warning: variable 'buf' is uninitialized when used within its own initialization [-Wuninitialized]

        void *buf = buf;
              ~~~   ^~~

1 warning generated.

Arnd's explanation during review:

/*
* Returns the physical address of the partition's reserved page through
* an iterative number of calls.
*
* On first call, 'cookie' and 'len' should be set to 0, and 'addr'
* set to the nasid of the partition whose reserved page's address is
* being sought.
* On subsequent calls, pass the values, that were passed back on the
* previous call.
*
* While the return status equals SALRET_MORE_PASSES, keep calling
* this function after first copying 'len' bytes starting at 'addr'
* into 'buf'. Once the return status equals SALRET_OK, 'addr' will
* be the physical address of the partition's reserved page. If the
* return status equals neither of these, an error as occurred. */
static inline s64
sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)

so *len is set to zero on the first call and tells the bios how many bytes are accessible at 'buf', and it does get updated by the BIOS to tell us how many bytes it needs, and then we allocate that and try again.

---
 drivers/misc/sgi-xp/xpc_partition.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/sgi-xp/xpc_partition.c +1 -1
index 6956f7e7d439..ca5f0102daef 100644
@@ -70,7 +70,7 @@ xpc_get_rsvd_page_pa(int nasid)
 	unsigned long rp_pa = nasid;	/* seed with nasid */
 	size_t len = 0;
 	size_t buf_len = 0;
-	void *buf = buf;
+	void *buf = NULL;
 	void *buf_base = NULL;
 	enum xp_retval (*get_partition_rsvd_page_pa)
 		(void *, u64 *, unsigned long *, size_t *) =
Signature · 1 line
2.20.1
author maintainer
#105 lore raw

PATCH 146/251 serial: stm32: fix transmit_chars when tx is stopped

In reply to Sasha Levin

From: Erwan Le Ray <[email protected]>

[ Upstream commit b83b957c91f68e53f0dc596e129e8305761f2a32 ]

Disables the tx irq when the transmission is ended and updates stop_tx conditions for code cleanup.

Fixes 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
---
 drivers/tty/serial/stm32-usart.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/tty/serial/stm32-usart.c +3 -8
index 033856287ca2..ea8b591dd46f 100644
@@ -293,13 +293,8 @@ static void stm32_transmit_chars(struct uart_port *port)
 		return;
 	}
 
-	if (uart_tx_stopped(port)) {
-		stm32_stop_tx(port);
-		return;
-	}
-
-	if (uart_circ_empty(xmit)) {
-		stm32_stop_tx(port);
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 		return;
 	}
 
@@ -312,7 +307,7 @@ static void stm32_transmit_chars(struct uart_port *port)
 		uart_write_wakeup(port);
 
 	if (uart_circ_empty(xmit))
-		stm32_stop_tx(port);
+		stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 }
 
 static irqreturn_t stm32_interrupt(int irq, void *ptr)
Signature · 1 line
2.20.1
author maintainer
#101 lore raw

PATCH 142/251 thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power

In reply to Sasha Levin

From: Matthias Kaehlcke <[email protected]>

[ Upstream commit bf45ac18b78038e43af3c1a273cae4ab5704d2ce ]

The CPU load values passed to the thermal_power_cpu_get_power tracepoint are zero for all CPUs, unless, unless the thermal_power_cpu_limit tracepoint is enabled too:

irq/41-rockchip-98 [000] .... 290.972410: thermal_power_cpu_get_power:
cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815

vs

irq/41-rockchip-96 [000] .... 95.773585: thermal_power_cpu_get_power:
cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959
irq/41-rockchip-96 [000] .... 95.773596: thermal_power_cpu_limit:
cpus=0000000f freq=408000 cdev_state=10 power=416

There seems to be no good reason for omitting the CPU load information depending on another tracepoint. My guess is that the intention was to check whether thermal_power_cpu_get_power is (still) enabled, however 'load_cpu != NULL' already indicates that it was at least enabled when cpufreq_get_requested_power() was entered, there seems little gain from omitting the assignment if the tracepoint was just disabled, so just remove the check.

Fixes 6828a4711f99 ("thermal: add trace events to the power allocator governor")
---
 drivers/thermal/cpu_cooling.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/cpu_cooling.c +1 -1
index f49d2989d000..984e5f514140 100644
@@ -607,7 +607,7 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
 			load = 0;
 
 		total_load += load;
-		if (trace_thermal_power_cpu_limit_enabled() && load_cpu)
+		if (load_cpu)
 			load_cpu[i] = load;
 
 		i++;
Signature · 1 line
2.20.1
author maintainer
#135 lore raw

PATCH 176/251 net/mlx5: Fix mlx5_ifc_query_lag_out_bits

In reply to Sasha Levin

From: Mark Zhang <[email protected]>

[ Upstream commit ea77388b02270b0af8dc57f668f311235ea068f0 ]

Remove the "reserved_at_40" field to match the device specification.

Fixes 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG")
---
 include/linux/mlx5/mlx5_ifc.h | 2 --
 1 file changed, 2 deletions(-)
include/linux/mlx5/mlx5_ifc.h +0 -2
index 20ee90c47cd5..6dd276227217 100644
@@ -7909,8 +7909,6 @@ struct mlx5_ifc_query_lag_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
-
 	struct mlx5_ifc_lagc_bits ctx;
 };
 
Signature · 1 line
2.20.1
author maintainer
#99 lore raw

PATCH 140/251 kdb: do a sanity check on the cpu in kdb_per_cpu()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit b586627e10f57ee3aa8f0cfab0d6f7dc4ae63760 ]

The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the cpu in a bitmap of online cpus, but if the value is too high then it could read beyond the end of the bitmap and possibly Oops.

Fixes 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
---
 kernel/debug/kdb/kdb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/debug/kdb/kdb_main.c +1 -1
index 5a58421d7e2d..a52a6da8c3d0 100644
@@ -2632,7 +2632,7 @@ static int kdb_per_cpu(int argc, const char **argv)
 		diag = kdbgetularg(argv[3], &whichcpu);
 		if (diag)
 			return diag;
-		if (!cpu_online(whichcpu)) {
+		if (whichcpu >= nr_cpu_ids || !cpu_online(whichcpu)) {
 			kdb_printf("cpu %ld is not online\n", whichcpu);
 			return KDB_BADCPUNUM;
 		}
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 135/251 media: davinci/vpbe: array underflow in vpbe_enum_outputs()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit b72845ee5577b227131b1fef23f9d9a296621d7b ]

In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but the problem is that "temp_index" can be negative. This patch changes the types to unsigned to address this array underflow bug.

Fixes 66715cdc3224 ("[media] davinci vpbe: VPBE display driver")
---
 drivers/media/platform/davinci/vpbe.c | 2 +-
 include/media/davinci/vpbe.h          | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/media/platform/davinci/vpbe.c +1 -1
index abce9c4a1a8e..59518c08528b 100644
@@ -130,7 +130,7 @@ static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
 			     struct v4l2_output *output)
 {
 	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int temp_index = output->index;
+	unsigned int temp_index = output->index;
 
 	if (temp_index >= cfg->num_outputs)
 		return -EINVAL;
include/media/davinci/vpbe.h +1 -1
index 4376beeb28c2..5d8ceeddc797 100644
@@ -96,7 +96,7 @@ struct vpbe_config {
 	struct encoder_config_info *ext_encoders;
 	/* amplifier information goes here */
 	struct amp_config_info *amp;
-	int num_outputs;
+	unsigned int num_outputs;
 	/* Order is venc outputs followed by LCD and then external encoders */
 	struct vpbe_output *outputs;
 };
Signature · 1 line
2.20.1
author maintainer
#93 lore raw

PATCH 134/251 media: omap_vout: potential buffer overflow in vidioc_dqbuf()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit dd6e2a981bfe83aa4a493143fd8cf1edcda6c091 ]

The "b->index" is a u32 the comes from the user in the ioctl. It hasn't been checked. We aren't supposed to use it but we're instead supposed to use the value that gets written to it when we call videobuf_dqbuf().

The videobuf_dqbuf() first memsets it to zero and then re-initializes it inside the videobuf_status() function. It's this final value which we want.

Hans Verkuil pointed out that we need to check the return from videobuf_dqbuf(). I ended up doing a little cleanup related to that as well.

Fixes 72915e851da9 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf")
---
 drivers/media/platform/omap/omap_vout.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/media/platform/omap/omap_vout.c +6 -9
index a31b95cb3b09..77ec70f5fef6 100644
@@ -1526,23 +1526,20 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 	unsigned long size;
 	struct videobuf_buffer *vb;
 
-	vb = q->bufs[b->index];
-
 	if (!vout->streaming)
 		return -EINVAL;
 
-	if (file->f_flags & O_NONBLOCK)
-		/* Call videobuf_dqbuf for non blocking mode */
-		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
-	else
-		/* Call videobuf_dqbuf for  blocking mode */
-		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+	ret = videobuf_dqbuf(q, b, !!(file->f_flags & O_NONBLOCK));
+	if (ret)
+		return ret;
+
+	vb = q->bufs[b->index];
 
 	addr = (unsigned long) vout->buf_phy_addr[vb->i];
 	size = (unsigned long) vb->size;
 	dma_unmap_single(vout->vid_dev->v4l2_dev.dev,  addr,
 				size, DMA_TO_DEVICE);
-	return ret;
+	return 0;
 }
 
 static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
Signature · 1 line
2.20.1
author maintainer
#92 lore raw

PATCH 133/251 l2tp: Fix possible NULL pointer dereference

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 638a3a1e349ddf5b82f222ff5cb3b4f266e7c278 ]

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
PGD 0 P4D 0
Oops: 0000 [#1
CPU: 0 PID: 5697 Comm: modprobe Tainted: G        W         5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__lock_acquire+0x53/0x10b0
Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a
RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128
RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000
FS:  00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0
Call Trace:
 ? __lock_acquire+0x24e/0x10b0
 lock_acquire+0xdf/0x230
 ? flush_workqueue+0x71/0x530
 flush_workqueue+0x97/0x530
 ? flush_workqueue+0x71/0x530
 l2tp_exit_net+0x170/0x2b0 [l2tp_core
 ? l2tp_exit_net+0x93/0x2b0 [l2tp_core
 ops_exit_list.isra.6+0x36/0x60
 unregister_pernet_operations+0xb8/0x110
 unregister_pernet_device+0x25/0x40
 l2tp_init+0x55/0x1000 [l2tp_core
 ? 0xffffffffa018d000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fead031a839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839
RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003
RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80
Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core
CR2: 0000000000000128
---[ end trace 8322b2b8bf83f8e1

If alloc_workqueue fails in l2tp_init, l2tp_net_ops is unregistered on failure path. Then l2tp_exit_net is called which will flush NULL workqueue, this patch add a NULL check to fix it.

Fixes 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path")
---
 net/l2tp/l2tp_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/l2tp/l2tp_core.c +2 -1
index 4ae758bcb2cf..394a1ddb0782 100644
@@ -1947,7 +1947,8 @@ static __net_exit void l2tp_exit_net(struct net *net)
 	}
 	rcu_read_unlock_bh();
 
-	flush_workqueue(l2tp_wq);
+	if (l2tp_wq)
+		flush_workqueue(l2tp_wq);
 	rcu_barrier();
 }
 
Signature · 1 line
2.20.1
author maintainer
#90 lore raw

PATCH 131/251 net: ena: fix ena_com_fill_hash_function() implementation

In reply to Sasha Levin

From: Sameeh Jubran <[email protected]>

[ Upstream commit 11bd7a00c0d8ffe33d1e926f8e789b4aea787186 ]

ena_com_fill_hash_function() didn't configure the rss->hash_func.

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/amazon/ena/ena_com.c +1 -0
index 2d196d521b83..912dc09bc7a7 100644
@@ -2052,6 +2052,7 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 		return -EINVAL;
 	}
 
+	rss->hash_func = func;
 	rc = ena_com_set_hash_function(ena_dev);
 
 	/* Restore the old function */
Signature · 1 line
2.20.1
author maintainer
#85 lore raw

PATCH 126/251 IB/mlx5: Add missing XRC options to QP optional params mask

In reply to Sasha Levin

From: Jack Morgenstein <[email protected]>

[ Upstream commit 8f4426aa19fcdb9326ac44154a117b1a3a5ae126 ]

The QP transition optional parameters for the various transition for XRC QPs are identical to those for RC QPs.

Many of the XRC QP transition optional parameter bits are missing from the QP optional mask table. These omissions caused failures when doing XRC QP state transitions.

For example, when trying to change the response timer of an XRC receive QP via the RTS2RTS transition, the new timer value was ignored because MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask for XRC qps for the RTS2RTS transition.

Fix this by adding the missing XRC optional parameters for all QP transitions to the opt_mask table.

Fixes e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Fixes a4774e9095de ("IB/mlx5: Fix opt param mask according to firmware spec")
---
 drivers/infiniband/hw/mlx5/qp.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/infiniband/hw/mlx5/qp.c +21 -0
index a7bc89f5dae7..4d906a790481 100644
@@ -2324,6 +2324,11 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_PKEY_INDEX	|
 					  MLX5_QP_OPTPAR_Q_KEY		|
 					  MLX5_QP_OPTPAR_PRI_PORT,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_PKEY_INDEX	|
+					  MLX5_QP_OPTPAR_PRI_PORT,
 		},
 		[MLX5_QP_STATE_RTR] = {
 			[MLX5_QP_ST_RC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH  |
@@ -2357,6 +2362,12 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 					  MLX5_QP_OPTPAR_RWE		|
 					  MLX5_QP_OPTPAR_PM_STATE,
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH	|
+					  MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_PM_STATE	|
+					  MLX5_QP_OPTPAR_RNR_TIMEOUT,
 		},
 	},
 	[MLX5_QP_STATE_RTS] = {
@@ -2373,6 +2384,12 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY		|
 					  MLX5_QP_OPTPAR_SRQN		|
 					  MLX5_QP_OPTPAR_CQN_RCV,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_RNR_TIMEOUT	|
+					  MLX5_QP_OPTPAR_PM_STATE	|
+					  MLX5_QP_OPTPAR_ALT_ADDR_PATH,
 		},
 	},
 	[MLX5_QP_STATE_SQER] = {
@@ -2384,6 +2401,10 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 					   MLX5_QP_OPTPAR_RWE		|
 					   MLX5_QP_OPTPAR_RAE		|
 					   MLX5_QP_OPTPAR_RRE,
+			[MLX5_QP_ST_XRC]  = MLX5_QP_OPTPAR_RNR_TIMEOUT	|
+					   MLX5_QP_OPTPAR_RWE		|
+					   MLX5_QP_OPTPAR_RAE		|
+					   MLX5_QP_OPTPAR_RRE,
 		},
 	},
 };
Signature · 1 line
2.20.1
author maintainer
#78 lore raw

PATCH 119/251 media: ov2659: fix unbalanced mutex_lock/unlock

In reply to Sasha Levin

From: Akinobu Mita <[email protected]>

[ Upstream commit 384538bda10913e5c94ec5b5d34bd3075931bcf4 ]

Avoid returning with mutex locked.

Fixes fa8cb6444c32 ("[media] ov2659: Don't depend on subdev API")
---
 drivers/media/i2c/ov2659.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/ov2659.c +1 -1
index ade3c48e2e0c..18546f950d79 100644
@@ -1137,7 +1137,7 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
 		mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
 		*mf = fmt->format;
 #else
-		return -ENOTTY;
+		ret = -ENOTTY;
 #endif
 	} else {
 		s64 val;
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 116/251 tipc: set sysctl_tipc_rmem and named_timeout right range

In reply to Sasha Levin

From: Jie Liu <[email protected]>

[ Upstream commit 4bcd4ec1017205644a2697bccbc3b5143f522f5f ]

We find that sysctl_tipc_rmem and named_timeout do not have the right minimum setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem. And named_timeout as a timeout setting should be not less than zero.

Fixes cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf")
Fixes a5325ae5b8bff ("tipc: add name distributor resiliency queue")
---
 net/tipc/sysctl.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/tipc/sysctl.c +6 -2
index 1a779b1e8510..40f6d82083d7 100644
@@ -37,6 +37,8 @@
 
 #include <linux/sysctl.h>
 
+static int zero;
+static int one = 1;
 static struct ctl_table_header *tipc_ctl_hdr;
 
 static struct ctl_table tipc_table[] = {
@@ -45,14 +47,16 @@ static struct ctl_table tipc_table[] = {
 		.data		= &sysctl_tipc_rmem,
 		.maxlen		= sizeof(sysctl_tipc_rmem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1         = &one,
 	},
 	{
 		.procname	= "named_timeout",
 		.data		= &sysctl_tipc_named_timeout,
 		.maxlen		= sizeof(sysctl_tipc_named_timeout),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1         = &zero,
 	},
 	{}
 };
Signature · 1 line
2.20.1
author maintainer
#73 lore raw

PATCH 114/251 ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 9ee8578d953023cc57e7e736ae48502c707c0210 ]

Since commit 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions") kfree, iounmap, clk_put etc are not needed anymore in remove path.

Fixes 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
[ commit message spelling fix ]
---
 arch/arm/plat-pxa/ssp.c | 6 ------
 1 file changed, 6 deletions(-)
arch/arm/plat-pxa/ssp.c +0 -6
index b92673efffff..97bd43c16cd8 100644
@@ -230,18 +230,12 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 
 static int pxa_ssp_remove(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct ssp_device *ssp;
 
 	ssp = platform_get_drvdata(pdev);
 	if (ssp == NULL)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_put(ssp->clk);
-
 	mutex_lock(&ssp_lock);
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 88/251 ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit ca70ea43f80c98582f5ffbbd1e6f4da2742da0c4 ]

MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to perform low-level platform initialization. This results in a try to install HYP stubs for the second time for each CPU and results in false HYP/SVC mode mismatch detection. The HYP stubs are already installed at the beginning of the kernel initialization on the boot CPU (head.S) or in the secondary_startup() for other CPUs. To fix this issue MCPM code should use a cpu_resume() routine without HYP stubs installation.

This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid XU3/XU4/HC1 boards.

Fixes 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
---
 arch/arm/common/mcpm_entry.c   |  2 +-
 arch/arm/include/asm/suspend.h |  1 +
 arch/arm/kernel/sleep.S        | 12 ++++++++++++
 3 files changed, 14 insertions(+), 1 deletion(-)
arch/arm/common/mcpm_entry.c +1 -1
index a923524d1040..8617323eb273 100644
@@ -379,7 +379,7 @@ static int __init nocache_trampoline(unsigned long _arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	phys_reset_t phys_reset;
 
-	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
 	setup_mm_for_reboot();
 
 	__mcpm_cpu_going_down(cpu, cluster);
arch/arm/include/asm/suspend.h +1 -0
index 6c7182f32cef..e6c2f426f8c8 100644
@@ -7,6 +7,7 @@ struct sleep_save_sp {
 };
 
 extern void cpu_resume(void);
+extern void cpu_resume_no_hyp(void);
 extern void cpu_resume_arm(void);
 extern int cpu_suspend(unsigned long, int (*)(unsigned long));
 
arch/arm/kernel/sleep.S +12 -0
index 0f6c1000582c..c8569390e7e7 100644
@@ -119,6 +119,14 @@ ENDPROC(cpu_resume_after_mmu)
 	.text
 	.align
 
+#ifdef CONFIG_MCPM
+	.arm
+THUMB(	.thumb			)
+ENTRY(cpu_resume_no_hyp)
+ARM_BE8(setend be)			@ ensure we are in BE mode
+	b	no_hyp
+#endif
+
 #ifdef CONFIG_MMU
 	.arm
 ENTRY(cpu_resume_arm)
@@ -134,6 +142,7 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
 	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r1
+no_hyp:
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
@@ -162,6 +171,9 @@ ENDPROC(cpu_resume)
 
 #ifdef CONFIG_MMU
 ENDPROC(cpu_resume_arm)
+#endif
+#ifdef CONFIG_MCPM
+ENDPROC(cpu_resume_no_hyp)
 #endif
 
 	.align 2
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 106/251 media: tw5864: Fix possible NULL pointer dereference in tw5864_handle_frame

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 2e7682ebfc750177a4944eeb56e97a3f05734528 ]

'vb' null check should be done before dereferencing it in tw5864_handle_frame, otherwise a NULL pointer dereference may occur.

Fixes 34d1324edd31 ("[media] pci: Add tw5864 driver")
---
 drivers/media/pci/tw5864/tw5864-video.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/pci/tw5864/tw5864-video.c +2 -2
index 1ddf80f85c24..27ff6e0d9845 100644
@@ -1386,13 +1386,13 @@ static void tw5864_handle_frame(struct tw5864_h264_frame *frame)
 	input->vb = NULL;
 	spin_unlock_irqrestore(&input->slock, flags);
 
-	v4l2_buf = to_vb2_v4l2_buffer(&vb->vb.vb2_buf);
-
 	if (!vb) { /* Gone because of disabling */
 		dev_dbg(&dev->pci->dev, "vb is empty, dropping frame\n");
 		return;
 	}
 
+	v4l2_buf = to_vb2_v4l2_buffer(&vb->vb.vb2_buf);
+
 	/*
 	 * Check for space.
 	 * Mind the overhead of startcode emulation prevention.
Signature · 1 line
2.20.1
author maintainer
#62 lore raw

PATCH 103/251 m68k: mac: Fix VIA timer counter accesses

In reply to Sasha Levin

From: Finn Thain <[email protected]>

[ Upstream commit 0ca7ce7db771580433bf24454f7a1542bd326078 ]

This resolves some bugs that affect VIA timer counter accesses. Avoid lost interrupts caused by reading the counter low byte register. Make allowance for the fact that the counter will be decremented to 0xFFFF before being reloaded.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 arch/m68k/mac/via.c | 102 +++++++++++++++++++++++---------------------
 1 file changed, 53 insertions(+), 49 deletions(-)
arch/m68k/mac/via.c +53 -49
index 920ff63d4a81..c27bf9a906be 100644
@@ -53,16 +53,6 @@ static __u8 rbv_clear;
 
 static int gIER,gIFR,gBufA,gBufB;
 
-/*
- * Timer defs.
- */
-
-#define TICK_SIZE		10000
-#define MAC_CLOCK_TICK		(783300/HZ)		/* ticks per HZ */
-#define MAC_CLOCK_LOW		(MAC_CLOCK_TICK&0xFF)
-#define MAC_CLOCK_HIGH		(MAC_CLOCK_TICK>>8)
-
-
 /*
  * On Macs with a genuine VIA chip there is no way to mask an individual slot
  * interrupt. This limitation also seems to apply to VIA clone logic cores in
@@ -277,22 +267,6 @@ void __init via_init(void)
 	}
 }
 
-/*
- * Start the 100 Hz clock
- */
-
-void __init via_init_clock(irq_handler_t func)
-{
-	via1[vACR] |= 0x40;
-	via1[vT1LL] = MAC_CLOCK_LOW;
-	via1[vT1LH] = MAC_CLOCK_HIGH;
-	via1[vT1CL] = MAC_CLOCK_LOW;
-	via1[vT1CH] = MAC_CLOCK_HIGH;
-
-	if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
-		pr_err("Couldn't register %s interrupt\n", "timer");
-}
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -320,29 +294,6 @@ void via_debug_dump(void)
 	}
 }
 
-/*
- * This is always executed with interrupts disabled.
- *
- * TBI: get time offset between scheduling timer ticks
- */
-
-u32 mac_gettimeoffset(void)
-{
-	unsigned long ticks, offset = 0;
-
-	/* read VIA1 timer 2 current value */
-	ticks = via1[vT1CL] | (via1[vT1CH] << 8);
-	/* The probability of underflow is less than 2% */
-	if (ticks > MAC_CLOCK_TICK - MAC_CLOCK_TICK / 50)
-		/* Check for pending timer interrupt in VIA1 IFR */
-		if (via1[vIFR] & 0x40) offset = TICK_SIZE;
-
-	ticks = MAC_CLOCK_TICK - ticks;
-	ticks = ticks * 10000L / MAC_CLOCK_TICK;
-
-	return (ticks + offset) * 1000;
-}
-
 /*
  * Flush the L2 cache on Macs that have it by flipping
  * the system into 24-bit mode for an instant.
@@ -619,3 +570,56 @@ int via2_scsi_drq_pending(void)
 	return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ));
 }
 EXPORT_SYMBOL(via2_scsi_drq_pending);
+
+/* timer and clock source */
+
+#define VIA_CLOCK_FREQ     783360                /* VIA "phase 2" clock in Hz */
+#define VIA_TIMER_INTERVAL (1000000 / HZ)        /* microseconds per jiffy */
+#define VIA_TIMER_CYCLES   (VIA_CLOCK_FREQ / HZ) /* clock cycles per jiffy */
+
+#define VIA_TC             (VIA_TIMER_CYCLES - 2) /* including 0 and -1 */
+#define VIA_TC_LOW         (VIA_TC & 0xFF)
+#define VIA_TC_HIGH        (VIA_TC >> 8)
+
+void __init via_init_clock(irq_handler_t timer_routine)
+{
+	if (request_irq(IRQ_MAC_TIMER_1, timer_routine, 0, "timer", NULL)) {
+		pr_err("Couldn't register %s interrupt\n", "timer");
+		return;
+	}
+
+	via1[vT1LL] = VIA_TC_LOW;
+	via1[vT1LH] = VIA_TC_HIGH;
+	via1[vT1CL] = VIA_TC_LOW;
+	via1[vT1CH] = VIA_TC_HIGH;
+	via1[vACR] |= 0x40;
+}
+
+u32 mac_gettimeoffset(void)
+{
+	unsigned long flags;
+	u8 count_high;
+	u16 count, offset = 0;
+
+	/*
+	 * Timer counter wrap-around is detected with the timer interrupt flag
+	 * but reading the counter low byte (vT1CL) would reset the flag.
+	 * Also, accessing both counter registers is essentially a data race.
+	 * These problems are avoided by ignoring the low byte. Clock accuracy
+	 * is 256 times worse (error can reach 0.327 ms) but CPU overhead is
+	 * reduced by avoiding slow VIA register accesses.
+	 */
+
+	local_irq_save(flags);
+	count_high = via1[vT1CH];
+	if (count_high == 0xFF)
+		count_high = 0;
+	if (count_high > 0 && (via1[vIFR] & VIA_TIMER_1_INT))
+		offset = VIA_TIMER_CYCLES;
+	local_irq_restore(flags);
+
+	count = count_high << 8;
+	count = VIA_TIMER_CYCLES - count + offset;
+
+	return ((count * VIA_TIMER_INTERVAL) / VIA_TIMER_CYCLES) * 1000;
+}
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 102/251 tipc: tipc clang warning

In reply to Sasha Levin

From: Jon Maloy <[email protected]>

[ Upstream commit 737889efe9713a0f20a75fd0de952841d9275e6b ]

When checking the code with clang -Wsometimes-uninitialized we get the following warning:

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
      tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);

net/tipc/node.c:831:2: note: remove the 'if' if its condition is always true

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence this warning
struct tipc_media_addr *maddr;

We fix this by initializing 'maddr' to NULL. For the matter of clarity, we also test if 'xmitq' is non-empty before we use it and 'maddr' further down in the function. It will never happen that 'xmitq' is non- empty at the same time as 'maddr' is NULL, so this is a sufficient test.

Fixes 598411d70f85 ("tipc: make resetting of links non-atomic")
---
 net/tipc/node.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/tipc/node.c +4 -3
index db8fbc076e1a..fe7b0ad1d6f3 100644
@@ -688,10 +688,10 @@ static void __tipc_node_link_down(struct tipc_node *n, int *bearer_id,
 static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete)
 {
 	struct tipc_link_entry *le = &n->links[bearer_id];
+	struct tipc_media_addr *maddr = NULL;
 	struct tipc_link *l = le->link;
-	struct tipc_media_addr *maddr;
-	struct sk_buff_head xmitq;
 	int old_bearer_id = bearer_id;
+	struct sk_buff_head xmitq;
 
 	if (!l)
 		return;
@@ -713,7 +713,8 @@ static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete)
 	tipc_node_write_unlock(n);
 	if (delete)
 		tipc_mon_remove_peer(n->net, n->addr, old_bearer_id);
-	tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);
+	if (!skb_queue_empty(&xmitq))
+		tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);
 	tipc_sk_rcv(n->net, &le->inputq);
 }
 
Signature · 1 line
2.20.1
author maintainer
#60 lore raw

PATCH 101/251 jfs: fix bogus variable self-initialization

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit a5fdd713d256887b5f012608701149fa939e5645 ]

A statement was originally added in 2006 to shut up a gcc warning, now but now clang warns about it:

fs/jfs/jfs_txnmgr.c:1932:15: error: variable 'pxd' is uninitialized when used within its own initialization
[-Werror,-Wuninitialized]
pxd_t pxd = pxd; /* truncated extent of xad */
~~~ ^~~

Modern versions of gcc are fine without the silly assignment, so just drop it. Tested with gcc-4.6 (released 2011), 4.7, 4.8, and 4.9.

Fixes c9e3ad6021e5 ("JFS: Get rid of "may be used uninitialized" warnings")
---
 fs/jfs/jfs_txnmgr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/jfs/jfs_txnmgr.c +1 -2
index 4d973524c887..224ef034004b 100644
@@ -1928,8 +1928,7 @@ static void xtLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
 	 * header ?
 	 */
 	if (tlck->type & tlckTRUNCATE) {
-		/* This odd declaration suppresses a bogus gcc warning */
-		pxd_t pxd = pxd;	/* truncated extent of xad */
+		pxd_t pxd;	/* truncated extent of xad */
 		int twm;
 
 		/*
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 100/251 regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB

In reply to Sasha Levin

From: Axel Lin <[email protected]>

[ Upstream commit e69b394703e032e56a140172440ec4f9890b536d ]

selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.

Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT

0000     1.35 0100     1.8  1000     2.3  1100     2.85
0001     1.5  0101     1.9  1001     2.4  1101     3.0
0010     1.6  0110     2.0  1010     2.5  1110     3.3
0011     1.7  0111     2.1  1011     2.6  1111     Not Used
Fixes d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
---
 drivers/regulator/tps65086-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/tps65086-regulator.c +2 -2
index 6dbf3cf3951e..12d26261394f 100644
@@ -89,8 +89,8 @@ static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
 static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
-	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xA, 100000),
-	REGULATOR_LINEAR_RANGE(2700000, 0xB, 0xD, 150000),
+	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000),
+	REGULATOR_LINEAR_RANGE(2850000, 0xC, 0xD, 150000),
 	REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
 };
 
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 99/251 media: cx23885: check allocation return

In reply to Sasha Levin

From: Nicholas Mc Guire <[email protected]>

[ Upstream commit a3d7f22ef34ec4206b50ee121384d5c8bebd5591 ]

Checking of kmalloc() seems to have been committed - as cx23885_dvb_register() is checking for != 0 return, returning -ENOMEM should be fine here. While at it address the coccicheck suggestion to move to kmemdup rather than using kmalloc+memcpy.

Fixes 46b21bbaa8a8 ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2")
---
 drivers/media/pci/cx23885/cx23885-dvb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/media/pci/cx23885/cx23885-dvb.c +3 -2
index 818f3c2fc98d..1d86e57f4d9f 100644
@@ -1471,8 +1471,9 @@ static int dvb_register(struct cx23885_tsport *port)
 		if (fe0->dvb.frontend != NULL) {
 			struct i2c_adapter *tun_i2c;
 
-			fe0->dvb.frontend->sec_priv = kmalloc(sizeof(dib7000p_ops), GFP_KERNEL);
-			memcpy(fe0->dvb.frontend->sec_priv, &dib7000p_ops, sizeof(dib7000p_ops));
+			fe0->dvb.frontend->sec_priv = kmemdup(&dib7000p_ops, sizeof(dib7000p_ops), GFP_KERNEL);
+			if (!fe0->dvb.frontend->sec_priv)
+				return -ENOMEM;
 			tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);
 			if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))
 				return -ENODEV;
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 98/251 media: wl128x: Fix an error code in fm_download_firmware()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit ef4bb63dc1f7213c08e13f6943c69cd27f69e4a3 ]

We forgot to set "ret" on this error path.

Fixes e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
---
 drivers/media/radio/wl128x/fmdrv_common.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/media/radio/wl128x/fmdrv_common.c +3 -2
index c1457cf46698..db987dda356e 100644
@@ -1278,8 +1278,9 @@ static int fm_download_firmware(struct fmdev *fmdev, const u8 *fw_name)
 
 		switch (action->type) {
 		case ACTION_SEND_COMMAND:	/* Send */
-			if (fmc_send_cmd(fmdev, 0, 0, action->data,
-						action->size, NULL, NULL))
+			ret = fmc_send_cmd(fmdev, 0, 0, action->data,
+					   action->size, NULL, NULL);
+			if (ret)
 				goto rel_fw;
 
 			cmd_cnt++;
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 93/251 drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit 5ac188b12e7cbdd92dee60877d1fac913fc1d074 ]

If riocm_get_channel() fails, then we should just return -EINVAL. Calling riocm_put_channel() will trigger a NULL dereference and generally we should call put() if the get() didn't succeed.

Fixes b6e8d4aa1110 ("rapidio: add RapidIO channelized messaging driver")
Cc Matt Porter <[email protected]>
Cc Alexandre Bounine <[email protected]>
---
 drivers/rapidio/rio_cm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/rapidio/rio_cm.c +3 -1
index ef989a15aefc..b29fc258eeba 100644
@@ -1215,7 +1215,9 @@ static int riocm_ch_listen(u16 ch_id)
 	riocm_debug(CHOP, "(ch_%d)", ch_id);
 
 	ch = riocm_get_channel(ch_id);
-	if (!ch || !riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN))
+	if (!ch)
+		return -EINVAL;
+	if (!riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN))
 		ret = -EINVAL;
 	riocm_put_channel(ch);
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 89/251 ARM: 8848/1: virt: Align GIC version check with arm64 counterpart

In reply to Sasha Levin

From: Vladimir Murzin <[email protected]>

[ Upstream commit 9db043d36bd379f4cc99054c079de0dabfc38d03 ]

arm64 has got relaxation on GIC version check at early boot stage due to update of the GIC architecture let's align ARM with that.

To help backports (even though the code was correct at the time of writing)

Fixes e59941b9b381 ("ARM: 8527/1: virt: enable GICv3 system registers")
---
 arch/arm/kernel/hyp-stub.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/kernel/hyp-stub.S +2 -2
index 15d073ae5da2..f5e5e3e19659 100644
@@ -179,8 +179,8 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	@ Check whether GICv3 system registers are available
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
 	ubfx	r7, r7, #28, #4
-	cmp	r7, #1
-	bne	2f
+	teq	r7, #0
+	beq	2f
 
 	@ Enable system register accesses
 	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 86/251 clocksource/drivers/exynos_mct: Fix error path in timer resources initialization

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit b9307420196009cdf18bad55e762ac49fb9a80f4 ]

While freeing interrupt handlers in error path, don't assume that all requested interrupts are per-processor interrupts and properly release standard interrupts too.

Fixes 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
---
 drivers/clocksource/exynos_mct.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/clocksource/exynos_mct.c +13 -1
index d32248e2ceab..ae3cbaeffd9c 100644
@@ -563,7 +563,19 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 	return 0;
 
 out_irq:
-	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	if (mct_int_type == MCT_INT_PPI) {
+		free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	} else {
+		for_each_possible_cpu(cpu) {
+			struct mct_clock_event_device *pcpu_mevt =
+				per_cpu_ptr(&percpu_mct_tick, cpu);
+
+			if (pcpu_mevt->evt.irq != -1) {
+				free_irq(pcpu_mevt->evt.irq, pcpu_mevt);
+				pcpu_mevt->evt.irq = -1;
+			}
+		}
+	}
 	return err;
 }
 
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 87/251 mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe

In reply to Sasha Levin

From: Stefan Wahren <[email protected]>

[ Upstream commit 1e20186e706da8446f9435f2924cd65ab1397e73 ]

We need to handle mmc_of_parse() errors during probe otherwise the MMC driver could start without proper initialization (e.g. power sequence).

Fixes 476bf3d62d5c ("mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs")
---
 drivers/mmc/host/sdhci-brcmstb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-brcmstb.c +3 -1
index 159f6f64c68e..ed6473731b45 100644
@@ -90,7 +90,9 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
 
 	sdhci_get_of_property(pdev);
-	mmc_of_parse(host->mmc);
+	res = mmc_of_parse(host->mmc);
+	if (res)
+		goto err;
 
 	/*
 	 * Supply the existing CAPS, but clear the UHS modes. This
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 85/251 clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable

In reply to Sasha Levin

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit e7e7e0d7beafebd11b0c065cd5fbc1e5759c5aab ]

If the clock tree is not fully populated when the timer-sun5i init code is called, attempts to get the clock rate for the timer would fail and return 0.

Make the init code for both clock events and clocksource check the returned clock rate and fail gracefully if the result is 0, instead of causing a divide by 0 exception later on.

Fixes 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code")
---
 drivers/clocksource/timer-sun5i.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/clocksource/timer-sun5i.c +10 -0
index 4f87f3e76d83..c3e96de525a2 100644
@@ -201,6 +201,11 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	}
 
 	rate = clk_get_rate(clk);
+	if (!rate) {
+		pr_err("Couldn't get parent clock rate\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
 
 	cs->timer.base = base;
 	cs->timer.clk = clk;
@@ -274,6 +279,11 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	}
 
 	rate = clk_get_rate(clk);
+	if (!rate) {
+		pr_err("Couldn't get parent clock rate\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
 
 	ce->timer.base = base;
 	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 79/251 net: dsa: qca8k: Enable delay for RGMII_ID mode

In reply to Sasha Levin

From: Vinod Koul <[email protected]>

[ Upstream commit a968b5e9d5879f9535d6099505f9e14abcafb623 ]

RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode.

Fixes 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode")
---
 drivers/net/dsa/qca8k.c | 12 ++++++++++++
 drivers/net/dsa/qca8k.h |  1 +
 2 files changed, 13 insertions(+)
drivers/net/dsa/qca8k.c +12 -0
index ebfbaf8597f4..3bbe85aae49b 100644
@@ -460,6 +460,18 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
 		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
 			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
 		break;
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		/* RGMII_ID needs internal delay. This is enabled through
+		 * PORT5_PAD_CTRL for all ports, rather than individual port
+		 * registers
+		 */
+		qca8k_write(priv, reg,
+			    QCA8K_PORT_PAD_RGMII_EN |
+			    QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) |
+			    QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY));
+		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+		break;
 	case PHY_INTERFACE_MODE_SGMII:
 		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
 		break;
drivers/net/dsa/qca8k.h +1 -0
index 9c22bc3210cd..db95168ca111 100644
@@ -40,6 +40,7 @@
 						((0x8 + (x & 0x3)) << 22)
 #define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		\
 						((0x10 + (x & 0x3)) << 20)
+#define   QCA8K_MAX_DELAY				3
 #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
 #define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
 #define QCA8K_REG_MODULE_EN				0x030
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 92/251 scsi: megaraid_sas: reduce module load time

In reply to Sasha Levin

From: Steve Sistare <[email protected]>

[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]

megaraid_sas takes 1+ seconds to load while waiting for firmware:

[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state

This is due to the following loop in megasas_transition_to_ready(), which waits a minimum of 1 second, even though the FW becomes ready in tens of millisecs:

        /*
         * The cur_state should not last for more than max_wait secs
         */
        for (i = 0; i < max_wait; i++) {
                ...
                msleep(1000);
        ...
        dev_info(&instance->pdev->dev, "FW now in Ready state\n");

This is a regression, caused by a change of the msleep granularity from 1 to 1000 due to concern about waiting too long on systems with coarse jiffies.

To fix, increase iterations and use msleep(20), which results in:

[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state
Fixes fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/megaraid/megaraid_sas_base.c +2 -2
index c5cc002dfdd5..10ae624dd266 100644
@@ -3694,12 +3694,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 		/*
 		 * The cur_state should not last for more than max_wait secs
 		 */
-		for (i = 0; i < max_wait; i++) {
+		for (i = 0; i < max_wait * 50; i++) {
 			curr_abs_state = instance->instancet->
 				read_fw_status_reg(instance->reg_set);
 
 			if (abs_state == curr_abs_state) {
-				msleep(1000);
+				msleep(20);
 			} else
 				break;
 		}
Signature · 1 line
2.20.1