arm: dts: i.mx8x: add #cooling-cells properties
Subsystems (2)
PATCH 1/1 arm: dts: i.mx8x: add #cooling-cells properties
Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu at 0 or bad phandle (referred from cooling-device[0])
--- arch/arm/dts/fsl-imx8-ca35.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/dts/fsl-imx8-ca35.dtsi +4 -0
@@ -18,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_1: cpu at 1 {
@@ -26,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_2: cpu at 2 {
@@ -34,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_3: cpu at 3 {
@@ -42,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_L2: l2-cache0 {
Signature · 1 line
2.17.1
PATCH 1/1 arm: dts: i.mx8x: add #cooling-cells properties
Quoted 4 lines · Anatolij Gustschin
Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu at 0 or bad phandle (referred from cooling-device[0])
Thanks for fixing this.
Quoted 35 lines
Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/dts/fsl-imx8-ca35.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/dts/fsl-imx8-ca35.dtsi +3
-0@@ -18,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_1: cpu at 1 {@@ -26,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_2: cpu at 2 {@@ -34,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_3: cpu at 3 {
arch/arm/dts/fsl-imx8-ca35.dtsi line 51
Quoted 7 lines
arch/arm/dts/fsl-imx8-ca35.dtsi +1
-0@@ -42,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>; }; A35_L2: l2-cache0 {
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Fabio Estevam
reviewerPATCH 1/1 arm: dts: i.mx8x: add #cooling-cells properties
In reply to Anatolij GustschinQuoted 15 lines · Anatolij Gustschin
Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu at 0 or bad phandle (referred from cooling-device[0])Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/dts/fsl-imx8-ca35.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/dts/fsl-imx8-ca35.dtsi +0
-0
arch/arm/dts/fsl-imx8-ca35.dtsi line 21
Quoted 4 lines
arch/arm/dts/fsl-imx8-ca35.dtsi +1
-0@@ -18,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>;
Yes, this matches arch/arm64/boot/dts/freescale/imx8qxp.dtsi upstream.
Maybe we should sync with upstream at some point.
PATCH 1/1 arm: dts: i.mx8x: add #cooling-cells properties
Quoted 27 lines
Subject: Re: [PATCH] arm: dts: i.mx8x: add #cooling-cells properties
Quoted 3 lines · Anatolij Gustschin
Fix dtb building warnings:
Warning (cooling_device_property):/thermal-zones/cpu-thermal0/cooling-maps/map0:
Quoted 13 lines
Missing property '#cooling-cells' in node /cpus/cpu at 0 or bad phandle (referred from cooling-device[0])
Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/dts/fsl-imx8-ca35.dtsi | 4 ++++ 1 file changed, 4 insertions(+)(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8-ca35.dtsiindex28bc32c8b7..9af8b1511c100644arch/arm/dts/fsl-imx8-ca35.dtsi line 21
Quoted 4 lines
arch/arm/dts/fsl-imx8-ca35.dtsi +1
-0@@ -18,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + #cooling-cells = <2>;Yes, this matches
arch/arm64/boot/dts/freescale/imx8qxp.dtsiupstream.
Quoted 1 line
Maybe we should sync with upstream at some point.
I am still waiting Aisheng to finish the i.MX8QM and dts restructure, Aisheng did a big restructure. If import earlier, we have to import and adapt again.
Thanks,
Peng.
Quoted 2 lines
Reviewed-by Fabio Estevam <[email protected]>
PATCH 1/1 arm: dts: i.mx8x: add #cooling-cells properties
In reply to Anatolij GustschinQuoted 6 lines
Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu at 0 or bad phandle (referred from cooling-device[0])Signed-off-by Anatolij Gustschin <[email protected]>Reviewed-by Stefano Babic <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================