Fix Exynos4210 DMA support
v3 cover Fix Exynos4210 DMA support
Commit 59520dc65e ("hw/arm/exynos4210: Add DMA support for the Exynos4210") introduced DMA support for Exynos4210. Unfortunately, it never really worked. DMA interrupt line and polarity was wrong, and the serial port needs extra code to support DMA. This patch series fixes the problem.
The series also converts pl330 and exynos4210_uart code to support tracing. While not strictly necessary, this was very useful for debugging, and it seemed too valuable to drop it from the final series. Similar, improved support for receive FIFO handling is not strictly necessary to fix DMA handling, but I initially thought that it was and added the code. Like tracing support it seemed too valuable to drop it.
The series was tested with qemu's smdkc210 and nuri emulations and with exynos4210-smdkv310.dtb. Without the series, the emulation does not react to serial line input, and serial line output stalls when using DMA. With this series in place, serial line input is handled correctly, serial output does not stall, and DMA interrupts are observed and handled.
v3: Increased number of or-irq-lines to 48 to support the full number
of lines needed. Simplifications in handling UCON register when handling receive timeouts. Don't save timer state in VMSTATE. Added Reviewed-by: tags as received.
v2: Addressed all feedback comments but one (see last patch of series).
Please see individual patches for details.
PATCH v3 1/8 dma/pl330: Convert to support tracing
Replace debug logging code with tracing.
---
v3: Added Reviewed-by: tag
v2: Make call to pl330_hexdump() conditional
hw/dma/pl330.c | 88 ++++++++++++++++++++++++--------------------- hw/dma/trace-events | 24 +++++++++++++ 2 files changed, 72 insertions(+), 40 deletions(-)
hw/dma/pl330.c +48 -40
@@ -25,19 +25,12 @@#include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" +#include "trace.h" #ifndef PL330_ERR_DEBUG #define PL330_ERR_DEBUG 0#endif -#define DB_PRINT_L(lvl, fmt, args...) do {\ - if (PL330_ERR_DEBUG >= lvl) {\ - fprintf(stderr, "PL330: %s:" fmt, __func__, ## args);\ - } \ -} while (0) - -#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) -#define PL330_PERIPH_NUM 32#define PL330_MAX_BURST_LEN 128#define PL330_INSN_MAXSIZE 6
@@ -319,6 +312,26 @@ typedef struct PL330InsnDesc {void (*exec)(PL330Chan *,uint8_t opcode,uint8_t *args,int len); } PL330InsnDesc; +static void pl330_hexdump (uint8_t *buf,size_t size) +{ +unsigned int b, i, len; +char tmpbuf[80 ]; + +for (b =0 ; b < size; b +=16 ) { + len = size - b; +if (len >16 ) { + len =16 ; + } + tmpbuf[0 ] ='\0' ; +for (i =0 ; i < len; i++) { +if ((i %4 ) ==0 ) { +strcat (tmpbuf," " ); + } +sprintf (tmpbuf +strlen (tmpbuf)," %02x" , buf[b + i]); + } +trace_pl330_hexdump (b, tmpbuf); + } +}/* MFIFO Implementation *
@@ -582,7 +595,7 @@ static inline void pl330_queue_remove_tagged(PL330Queue *s, uint8_t tag)static inline void pl330_fault (PL330Chan *ch,uint32_t flags) { -DB_PRINT ("ch: %p, flags: %" PRIx32"\n" , ch, flags); +trace_pl330_fault (ch, flags); ch->fault_type |= flags;if (ch->state == pl330_chan_fault) {return ;
@@ -590,7 +603,7 @@ static inline void pl330_fault(PL330Chan *ch, uint32_t flags) ch->state = pl330_chan_fault; ch->parent->num_faulting++;if (ch->parent->num_faulting ==1 ) { -DB_PRINT ("abort interrupt raised\n" ); +trace_pl330_fault_abort ();qemu_irq_raise (ch->parent->irq_abort); } }
@@ -648,7 +661,7 @@ static void pl330_dmaend(PL330Chan *ch, uint8_t opcode,return ; } } -DB_PRINT ("DMA ending!\n" ); +trace_pl330_dmaend ();pl330_fifo_tagged_remove (&s->fifo, ch->tag);pl330_queue_remove_tagged (&s->read_queue, ch->tag);pl330_queue_remove_tagged (&s->write_queue, ch->tag);
@@ -683,7 +696,7 @@ static void pl330_dmago(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)uint32_t pc;PL330Chan *s; -DB_PRINT ("\n" ); +trace_pl330_dmago ();if (!ch->is_manager) {pl330_fault (ch,PL330_FAULT_UNDEF_INSTR );
@@ -740,9 +753,7 @@ static void pl330_dmald(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) ch->stall =pl330_queue_put_insn (&ch->parent->read_queue, ch->src, size, num, inc,0 , ch->tag);if (!ch->stall) { -DB_PRINT ("channel:%" PRId8" address:%08" PRIx32" size:%" PRIx32 -" num:%" PRId32" %c\n" , - ch->tag, ch->src, size, num, inc ?'Y' :'N' ); +trace_pl330_dmald (ch->tag, ch->src, size, num, inc ?'Y' :'N' ); ch->src += inc ? size * num - (ch->src & (size -1 )) :0 ; } }
@@ -782,7 +793,7 @@ static void pl330_dmakill(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) ch->fault_type =0 ; ch->parent->num_faulting--;if (ch->parent->num_faulting ==0 ) { -DB_PRINT ("abort interrupt lowered\n" ); +trace_pl330_dmakill ();qemu_irq_lower (ch->parent->irq_abort); } }
@@ -800,6 +811,8 @@ static void pl330_dmalpend(PL330Chan *ch, uint8_t opcode,uint8_t bs = opcode &3 ;uint8_t lc = (opcode &4 ) >>2 ; +trace_pl330_dmalpend (nf, bs, lc, ch->lc[lc], ch->request_flag); +if (bs ==2 ) {pl330_fault (ch,PL330_FAULT_OPERAND_INVALID );return ;
@@ -813,12 +826,12 @@ static void pl330_dmalpend(PL330Chan *ch, uint8_t opcode,if (nf) { ch->lc[lc]--; } -DB_PRINT ("loop reiteration\n" ); +trace_pl330_dmalpiter (); ch->pc -= args[0 ]; ch->pc -= len +1 ;/* "ch->pc -= args[0] + len + 1" is incorrect when args[0] == 256 */ }else { -DB_PRINT ("loop fallthrough\n" ); +trace_pl330_dmalpfallthrough (); } }
@@ -886,10 +899,10 @@ static void pl330_dmasev(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) }if (ch->parent->inten & (1 << ev_id)) { ch->parent->int_status |= (1 << ev_id); -DB_PRINT ("event interrupt raised %" PRId8"\n" , ev_id); +trace_pl330_dmasev_evirq (ev_id);qemu_irq_raise (ch->parent->irq[ev_id]); } -DB_PRINT ("event raised %" PRId8"\n" , ev_id); +trace_pl330_dmasev_event (ev_id); ch->parent->ev_status |= (1 << ev_id); }
@@ -914,9 +927,7 @@ static void pl330_dmast(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) ch->stall =pl330_queue_put_insn (&ch->parent->write_queue, ch->dst, size, num, inc,0 , ch->tag);if (!ch->stall) { -DB_PRINT ("channel:%" PRId8" address:%08" PRIx32" size:%" PRIx32 -" num:%" PRId32" %c\n" , - ch->tag, ch->dst, size, num, inc ?'Y' :'N' ); +trace_pl330_dmast (ch->tag, ch->dst, size, num, inc ?'Y' :'N' ); ch->dst += inc ? size * num - (ch->dst & (size -1 )) :0 ; } }
@@ -992,7 +1003,7 @@ static void pl330_dmawfe(PL330Chan *ch, uint8_t opcode, } } ch->parent->ev_status &= ~(1 << ev_id); -DB_PRINT ("event lowered %" PRIx8"\n" , ev_id); +trace_pl330_dmawfe (ev_id); }else { ch->stall =1 ; }
@@ -1135,7 +1146,7 @@ static int pl330_chan_exec(PL330Chan *ch) ch->stall =0 ; insn =pl330_fetch_insn (ch);if (!insn) { -DB_PRINT ("pl330 undefined instruction\n" ); +trace_pl330_chan_exec_undef ();pl330_fault (ch,PL330_FAULT_UNDEF_INSTR );return 0 ; }
@@ -1175,10 +1186,9 @@ static int pl330_exec_cycle(PL330Chan *channel)int len = q->len - (q->addr & (q->len -1 ));dma_memory_read (&address_space_memory, q->addr, buf, len); -if (PL330_ERR_DEBUG >1 ) { -DB_PRINT ("PL330 read from memory @%08" PRIx32" (size = %08x):\n" , - q->addr, len); -qemu_hexdump ((char *)buf, stderr,"" , len); +trace_pl330_exec_cycle (q->addr, len); +if (trace_event_get_state_backends (TRACE_PL330_HEXDUMP )) { +pl330_hexdump (buf, len); } fifo_res =pl330_fifo_push (&s->fifo, buf, len, q->tag);if (fifo_res ==PL330_FIFO_OK ) {
@@ -1207,10 +1217,9 @@ static int pl330_exec_cycle(PL330Chan *channel) }if (fifo_res ==PL330_FIFO_OK || q->z) {dma_memory_write (&address_space_memory, q->addr, buf, len); -if (PL330_ERR_DEBUG >1 ) { -DB_PRINT ("PL330 read from memory @%08" PRIx32 -" (size = %08x):\n" , q->addr, len); -qemu_hexdump ((char *)buf, stderr,"" , len); +trace_pl330_exec_cycle (q->addr, len); +if (trace_event_get_state_backends (TRACE_PL330_HEXDUMP )) { +pl330_hexdump (buf, len); }if (q->inc) { q->addr += len;
@@ -1252,8 +1261,8 @@ static int pl330_exec_channel(PL330Chan *channel)static inline void pl330_exec (PL330State *s) { -DB_PRINT ("\n" );int i, insr_exec; +trace_pl330_exec (); do { insr_exec = pl330_exec_channel(&s->manager);
@@ -1298,7 +1307,7 @@ static void pl330_debug_exec(PL330State *s) args[2 ] = (s->dbg[1 ] >>8 ) &0xff ; args[3 ] = (s->dbg[1 ] >>16 ) &0xff ; args[4 ] = (s->dbg[1 ] >>24 ) &0xff ; -DB_PRINT ("chan id: %" PRIx8"\n" , chan_id); +trace_pl330_debug_exec (chan_id);if (s->dbg[0 ] &1 ) { ch = &s->chan[chan_id]; }else {
@@ -1320,6 +1329,7 @@ static void pl330_debug_exec(PL330State *s) ch->fault_type |=PL330_FAULT_DBG_INSTR ; }if (ch->stall) { +trace_pl330_debug_exec_stall ();qemu_log_mask (LOG_UNIMP ,"pl330: stall of debug instruction not " "implemented\n" ); }
@@ -1334,7 +1344,7 @@ static void pl330_iomem_write(void *opaque, hwaddr offset,PL330State *s = (PL330State *) opaque;int i; -DB_PRINT ("addr: %08x data: %08x\n" , (unsigned )offset, (unsigned )value); +trace_pl330_iomem_write ((unsigned )offset, (unsigned )value);switch (offset) {case PL330_REG_INTEN :
@@ -1343,7 +1353,7 @@ static void pl330_iomem_write(void *opaque, hwaddr offset,case PL330_REG_INTCLR :for (i =0 ; i < s->num_events; i++) {if (s->int_status & s->inten & value & (1 << i)) { -DB_PRINT ("event interrupt lowered %d\n" , i); +trace_pl330_iomem_write_clr (i);qemu_irq_lower (s->irq[i]); } }
@@ -1361,11 +1371,9 @@ static void pl330_iomem_write(void *opaque, hwaddr offset, }break ;case PL330_REG_DBGINST0 : -DB_PRINT ("s->dbg[0] = %08x\n" , (unsigned )value); s->dbg[0 ] = value;break ;case PL330_REG_DBGINST1 : -DB_PRINT ("s->dbg[1] = %08x\n" , (unsigned )value); s->dbg[1 ] = value;break ;default :
@@ -1489,7 +1497,7 @@ static uint64_t pl330_iomem_read(void *opaque, hwaddr offset, unsigned size) {uint32_t ret =pl330_iomem_read_imp (opaque, offset); -DB_PRINT ("addr: %08" HWADDR_PRIx" data: %08" PRIx32"\n" , offset, ret); +trace_pl330_iomem_read ((uint32_t )offset, ret);return ret; }
hw/dma/trace-events +24 -0
@@ -20,3 +20,27 @@ sparc32_dma_enable_lower(void) "Lower DMA enable" # i8257.c i8257_unregistered_dma(int nchan, int dma_pos, int dma_len) "unregistered DMA channel used nchan=%d dma_pos=%d dma_len=%d" + +# pl330.c +pl330_fault(void *ptr, uint32_t flags) "ch: %p, flags: 0x%"PRIx32 +pl330_fault_abort(void) "abort interrupt raised" +pl330_dmaend(void) "DMA ending" +pl330_dmago(void) "DMA run" +pl330_dmald(uint32_t chan, uint32_t addr, uint32_t size, uint32_t num, uint32_t ch) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32"%c" +pl330_dmakill(void) "abort interrupt lowered" +pl330_dmalpend(uint8_t nf, uint8_t bs, uint8_t lc, uint8_t ch, uint8_t flag) "nf=0x%02x bs=0x%02x lc=0x%02x ch=0x%02x flag=0x%02x" +pl330_dmalpiter(void) "loop reiteration" +pl330_dmalpfallthrough(void) "loop fallthrough" +pl330_dmasev_evirq(uint8_t ev_id) "event interrupt raised %"PRId8 +pl330_dmasev_event(uint8_t ev_id) "event raised %"PRId8 +pl330_dmast(uint32_t chn, uint32_t addr, uint32_t sz, uint32_t num, uint32_t c) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32" %c" +pl330_dmawfe(uint8_t ev_id) "event lowered 0x%"PRIx8 +pl330_chan_exec_undef(void) "undefined instruction" +pl330_exec_cycle(uint32_t addr, uint32_t size) "PL330 read from memory @0x%08"PRIx32" (size = 0x%08"PRIx32")" +pl330_hexdump(uint32_t offset, char *str) " 0x%04"PRIx32":%s" +pl330_exec(void) "pl330_exec" +pl330_debug_exec(uint8_t ch) "chan id: 0x%"PRIx8 +pl330_debug_exec_stall(void) "stall of debug instruction not implemented" +pl330_iomem_write(uint32_t offset, uint32_t value) "addr: 0x%08"PRIx32" data: 0x%08"PRIx32 +pl330_iomem_write_clr(int i) "event interrupt lowered %d" +pl330_iomem_read(uint32_t addr, uint32_t data) "addr: 0x%08"PRIx32" data: 0x%08"PRIx32
Signature · 1 line
2.17.1
Re: [PATCH v3 1/8] dma/pl330: Convert to support tracing
Quoted 5 lines · Guenter Roeck
Replace debug logging code with tracing.
Reviewed-by Peter Maydell <[email protected]>Signed-off-by Guenter Roeck <[email protected]>
This turns out not to compile on OSX, which is a bit stricter about format strings:
These two:
hw/dma/trace-events sparc32_dma_enable_lower(void) "Lower DMA enable" · line 36
Quoted 3 lines
hw/dma/trace-events +2
-0+pl330_dmald(uint32_t chan, uint32_t addr, uint32_t size, uint32_t num, uint32_t ch) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32"%c" +pl330_dmast(uint32_t chn, uint32_t addr, uint32_t sz, uint32_t num, uint32_t c) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32" %c"
both provoke
error: format specifies type 'char' but the argument has type
'uint32_t' (aka 'unsigned int') [-Werror,-Wformat]
because of the last argument.
Easy fix would seem to be to change 'uint32_t ch' to 'char ch' (the argument is always a literal constant 'Y' or 'N').
thanks
-- PMM
Re: [PATCH v3 1/8] dma/pl330: Convert to support tracing
Quoted 17 lines · Peter Maydell
Quoted 5 lines · Guenter Roeck
Replace debug logging code with tracing.
Reviewed-by Peter Maydell <[email protected]>Signed-off-by Guenter Roeck <[email protected]>This turns out not to compile on OSX, which is a bit stricter about format strings:
These two:
hw/dma/trace-events sparc32_dma_enable_lower(void) "Lower DMA enable" · line 36
Quoted 3 lines
hw/dma/trace-events +2
-0+pl330_dmald(uint32_t chan, uint32_t addr, uint32_t size, uint32_t num, uint32_t ch) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32"%c" +pl330_dmast(uint32_t chn, uint32_t addr, uint32_t sz, uint32_t num, uint32_t c) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32" %c"
Quoted 8 lines
both provoke
error: format specifies type 'char' but the argument has type
'uint32_t' (aka 'unsigned int') [-Werror,-Wformat]because of the last argument.
Easy fix would seem to be to change '
uint32_tch' to 'char ch' (the argument is always a literal constant 'Y' or 'N').
The 'chan'/'chn' argument is wrong too -- should be uint8_t to match the format string and the type of PL330Chan::tag. I'll just fix up the pullreq rather than forcing a respin.
-- PMM
Re: [PATCH v3 1/8] dma/pl330: Convert to support tracing
Quoted 22 lines · Peter Maydell
Quoted 21 lines · Peter Maydell
Quoted 5 lines · Guenter Roeck
Replace debug logging code with tracing.
Reviewed-by Peter Maydell <[email protected]>Signed-off-by Guenter Roeck <[email protected]>This turns out not to compile on OSX, which is a bit stricter about format strings:
These two:
hw/dma/trace-events sparc32_dma_enable_lower(void) "Lower DMA enable" · line 36
Quoted 3 lines
hw/dma/trace-events +2
-0+pl330_dmald(uint32_t chan, uint32_t addr, uint32_t size, uint32_t num, uint32_t ch) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32"%c" +pl330_dmast(uint32_t chn, uint32_t addr, uint32_t sz, uint32_t num, uint32_t c) "channel:%"PRId8" address:0x%08"PRIx32" size:0x%"PRIx32" num:%"PRId32" %c"both provoke
error: format specifies type 'char' but the argument has type
'uint32_t' (aka 'unsigned int') [-Werror,-Wformat]
Quoted 8 lines
Quoted 4 lines
because of the last argument.
Easy fix would seem to be to change '
uint32_tch' to 'char ch' (the argument is always a literal constant 'Y' or 'N').The 'chan'/'chn' argument is wrong too -- should be
uint8_tto match the format string and the type ofPL330Chan::tag. I'll just fix up the pullreq rather than forcing a respin.
Thanks, and sorry for the trouble.
Guenter
PATCH v3 2/8 hw/core/or-irq: Increase limit of or-lines to 48
In reply to Guenter RoeckExynos DMA requires up to 33 interrupt lines (32 event interrupts plus abort interrupt), which all need to be wired together. Increase the maximum number of or-irq lines to 48 to support this configuration.
---
v3: Added patch
include/hw/or-irq.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/or-irq.h +1 -1
@@ -33,7 +33,7 @@/* This can safely be increased if necessary without breaking * migration compatibility (as long as it remains greater than 15). */ -#define MAX_OR_LINES 32 +#define MAX_OR_LINES 48typedef struct OrIRQState qemu_or_irq ;
Signature · 1 line
2.17.1
PATCH v3 3/8 hw/arm/exynos4210: Fix DMA initialization
In reply to Guenter RoeckFirst parameter to exynos4210_get_irq() is not the SPI port number, but the interrupt group number. Interrupt groups are 20 for mdma and 21 for pdma. Interrupts are not inverted. Controllers support 32 events (pdma) or 31 events (mdma). Events must all be routed to a single interrupt line. Set other parameters as documented in Exynos4210 datasheet, section 8 (DMA controller).
---
v3: Back to 32+1 interrupts for pdma and 31+1 for mdma
v2: Use interrupt combiner instead of connecting all events to a
single interrupt. Limit number of events per DMA channel to 31 to meet qemu interrupt combiner limitations. [Not sure if "assert(s->num_lines < MAX_OR_LINES);" should be
"assert(s->num_lines <= MAX_OR_LINES);"]
Introduce exynos4210_init() to handle interrupt combiner initialization.
hw/arm/exynos4210.c | 51 +++++++++++++++++++++++++++++++------ include/hw/arm/exynos4210.h | 4 +++ 2 files changed, 47 insertions(+), 8 deletions(-)
hw/arm/exynos4210.c +43 -8
@@ -166,17 +166,36 @@ static uint64_t exynos4210_calc_affinity(int cpu)return (0x9 <<ARM_AFF1_SHIFT ) | cpu; } -static void pl330_create (uint32_t base,qemu_irq irq,int nreq) +static void pl330_create (uint32_t base,qemu_or_irq *orgate,qemu_irq irq, +int nreq,int nevents,int width) {SysBusDevice *busdev;DeviceState *dev; +int i; dev =qdev_create (NULL ,"pl330" ); +qdev_prop_set_uint8 (dev,"num_events" , nevents); +qdev_prop_set_uint8 (dev,"num_chnls" ,8 );qdev_prop_set_uint8 (dev,"num_periph_req" , nreq); + +qdev_prop_set_uint8 (dev,"wr_cap" ,4 ); +qdev_prop_set_uint8 (dev,"wr_q_dep" ,8 ); +qdev_prop_set_uint8 (dev,"rd_cap" ,4 ); +qdev_prop_set_uint8 (dev,"rd_q_dep" ,8 ); +qdev_prop_set_uint8 (dev,"data_width" , width); +qdev_prop_set_uint16 (dev,"data_buffer_dep" , width);qdev_init_nofail (dev); busdev =SYS_BUS_DEVICE (dev);sysbus_mmio_map (busdev,0 , base); -sysbus_connect_irq (busdev,0 , irq); + +object_property_set_int (OBJECT (orgate), nevents +1 ,"num-lines" , + &error_abort); +object_property_set_bool (OBJECT (orgate), true,"realized" , &error_abort); + +for (i =0 ; i < nevents +1 ; i++) { +sysbus_connect_irq (busdev, i,qdev_get_gpio_in (DEVICE (orgate), i)); + } +qdev_connect_gpio_out (DEVICE (orgate),0 , irq); }static void exynos4210_realize (DeviceState *socdev,Error **errp)
@@ -431,12 +450,27 @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) s->irq_table[exynos4210_get_irq(28, 3)]);/*** DMA controllers ***/ -pl330_create (EXYNOS4210_PL330_BASE0_ADDR , -qemu_irq_invert (s->irq_table[exynos4210_get_irq (35 ,1 )]),32 ); -pl330_create (EXYNOS4210_PL330_BASE1_ADDR , -qemu_irq_invert (s->irq_table[exynos4210_get_irq (36 ,1 )]),32 ); -pl330_create (EXYNOS4210_PL330_BASE2_ADDR , -qemu_irq_invert (s->irq_table[exynos4210_get_irq (34 ,1 )]),1 ); +pl330_create (EXYNOS4210_PL330_BASE0_ADDR , &s->pl330_irq_orgate[0 ], + s->irq_table[exynos4210_get_irq (21 ,0 )],32 ,32 ,32 ); +pl330_create (EXYNOS4210_PL330_BASE1_ADDR , &s->pl330_irq_orgate[1 ], + s->irq_table[exynos4210_get_irq (21 ,1 )],32 ,32 ,32 ); +pl330_create (EXYNOS4210_PL330_BASE2_ADDR , &s->pl330_irq_orgate[2 ], + s->irq_table[exynos4210_get_irq (20 ,1 )],1 ,31 ,64 ); +} + +static void exynos4210_init (Object *obj) +{ +Exynos4210State *s =EXYNOS4210_SOC (obj); +int i; + +for (i =0 ; i <ARRAY_SIZE (s->pl330_irq_orgate); i++) { +char *name =g_strdup_printf ("pl330-irq-orgate%d" , i); +qemu_or_irq *orgate = &s->pl330_irq_orgate[i]; + +object_initialize_child (obj, name, orgate,sizeof (*orgate), +TYPE_OR_IRQ , &error_abort,NULL ); +g_free (name); + } }static void exynos4210_class_init (ObjectClass *klass,void *data)
@@ -450,6 +484,7 @@ static const TypeInfo exynos4210_info = { .name = TYPE_EXYNOS4210_SOC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210State), + .instance_init = exynos4210_init, .class_init = exynos4210_class_init, };
include/hw/arm/exynos4210.h +4 -0
@@ -24,6 +24,7 @@#ifndef EXYNOS4210_H #define EXYNOS4210_H +#include "hw/or-irq.h" #include "hw/sysbus.h" #include "target/arm/cpu-qom.h"
@@ -74,6 +75,8 @@#define EXYNOS4210_I2C_NUMBER 9 +#define EXYNOS4210_NUM_DMA 3 + typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ];
@@ -97,6 +100,7 @@ typedef struct Exynos4210State {MemoryRegion boot_secondary;MemoryRegion bootreg_mem;I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER ]; +qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA ]; } Exynos4210State;#define TYPE_EXYNOS4210_SOC "exynos4210"
Signature · 1 line
2.17.1
PATCH v3 4/8 hw/char/exynos4210_uart: Convert to support tracing
In reply to Guenter RoeckReplace debug code with tracing to aid debugging.
---
v3: No change
v2: Added Reviewed-by: tag
hw/char/exynos4210_uart.c | 96 ++++++++++++--------------------------- hw/char/trace-events | 17 +++++++ 2 files changed, 47 insertions(+), 66 deletions(-)
hw/char/exynos4210_uart.c +30 -66
@@ -31,45 +31,7 @@#include "hw/irq.h" #include "hw/qdev-properties.h" -#undef DEBUG_UART -#undef DEBUG_UART_EXTEND -#undef DEBUG_IRQ -#undef DEBUG_Rx_DATA -#undef DEBUG_Tx_DATA - -#define DEBUG_UART 0 -#define DEBUG_UART_EXTEND 0 -#define DEBUG_IRQ 0 -#define DEBUG_Rx_DATA 0 -#define DEBUG_Tx_DATA 0 - -#if DEBUG_UART -#define PRINT_DEBUG(fmt, args...) \ - do { \ - fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ - } while (0) - -#if DEBUG_UART_EXTEND -#define PRINT_DEBUG_EXTEND(fmt, args...) \ - do { \ - fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ - } while (0) -#else -#define PRINT_DEBUG_EXTEND(fmt, args...) \ - do {} while (0) -#endif /* EXTEND */ - -#else -#define PRINT_DEBUG(fmt, args...) \ - do {} while (0) -#define PRINT_DEBUG_EXTEND(fmt, args...) \ - do {} while (0) -#endif - -#define PRINT_ERROR(fmt, args...) \ - do { \ - fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ - } while (0) +#include "trace.h" /* * Offsets for UART registers relative to SFR base address
@@ -193,8 +155,7 @@ typedef struct Exynos4210UartState { } Exynos4210UartState; -#if DEBUG_UART -/* Used only for debugging inside PRINT_DEBUG_... macros */ +/* Used only for tracing */ static const char *exynos4210_uart_regname (hwaddr offset) {
@@ -208,7 +169,6 @@ static const char *exynos4210_uart_regname(hwaddr offset)return NULL ; } -#endif static void fifo_store (Exynos4210UartFIFO *q,uint8_t ch)
@@ -271,7 +231,7 @@ static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartStatebreak ;default : level =0 ; -PRINT_ERROR ("Wrong UART channel number: %d\n" , s->channel); +trace_exynos_uart_channel_error (s->channel); }return level;
@@ -297,14 +257,10 @@ static void exynos4210_uart_update_irq(Exynos4210UartState *s)if (s->reg[I_ (UINTP )]) {qemu_irq_raise (s->irq); - -#if DEBUG_IRQ -fprintf (stderr,"UART%d: IRQ has been raised: %08x\n" , - s->channel, s->reg[I_ (UINTP )]); -#endif - +trace_exynos_uart_irq_raised (s->channel, s->reg[I_ (UINTP )]); }else {qemu_irq_lower (s->irq); +trace_exynos_uart_irq_lowered (s->channel); } }
@@ -348,7 +304,7 @@ static void exynos4210_uart_update_parameters(Exynos4210UartState *s)qemu_chr_fe_ioctl (&s->chr,CHR_IOCTL_SERIAL_SET_PARAMS , &ssp); -PRINT_DEBUG ("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n" , +trace_exynos_uart_update_params ( s->channel, speed, parity, data_bits, stop_bits); }
@@ -358,8 +314,8 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,Exynos4210UartState *s = (Exynos4210UartState *)opaque;uint8_t ch; -PRINT_DEBUG_EXTEND ("UART%d: <0x%04x> %s <- 0x%08llx\n" , s->channel, - offset,exynos4210_uart_regname (offset), (long long unsigned int )val); +trace_exynos_uart_write (s->channel, offset, +exynos4210_uart_regname (offset), val);switch (offset) {case ULCON :
@@ -373,12 +329,12 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,if (val & UFCON_Rx_FIFO_RESET) {fifo_reset (&s->rx); s->reg[I_ (UFCON )] &= ~UFCON_Rx_FIFO_RESET; -PRINT_DEBUG ("UART%d: Rx FIFO Reset\n" , s->channel); +trace_exynos_uart_rx_fifo_reset (s->channel); }if (val & UFCON_Tx_FIFO_RESET) {fifo_reset (&s->tx); s->reg[I_ (UFCON )] &= ~UFCON_Tx_FIFO_RESET; -PRINT_DEBUG ("UART%d: Tx FIFO Reset\n" , s->channel); +trace_exynos_uart_tx_fifo_reset (s->channel); }break ;
@@ -390,9 +346,7 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,/* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all (&s->chr, &ch,1 ); -#if DEBUG_Tx_DATA -fprintf (stderr,"%c" , ch); -#endif +trace_exynos_uart_tx (s->channel, ch); s->reg[I_ (UTRSTAT )] |=UTRSTAT_TRANSMITTER_EMPTY | UTRSTAT_Tx_BUFFER_EMPTY; s->reg[I_ (UINTSP )] |=UINTSP_TXD ;
@@ -403,8 +357,7 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,case UINTP : s->reg[I_ (UINTP )] &= ~val; s->reg[I_ (UINTSP )] &= ~val; -PRINT_DEBUG ("UART%d: UINTP [%04x] have been cleared: %08x\n" , - s->channel, offset, s->reg[I_ (UINTP )]); +trace_exynos_uart_intclr (s->channel, s->reg[I_ (UINTP )]);exynos4210_uart_update_irq (s);break ;case UTRSTAT :
@@ -412,7 +365,7 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,case UFSTAT :case UMSTAT :case URXH : -PRINT_DEBUG ("UART%d: Trying to write into RO register: %s [%04x]\n" , +trace_exynos_uart_ro_write ( s->channel,exynos4210_uart_regname (offset), offset);break ;case UINTSP :
@@ -439,6 +392,8 @@ static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset,case UERSTAT :/* Read Only */ res = s->reg[I_ (UERSTAT )]; s->reg[I_ (UERSTAT )] =0 ; +trace_exynos_uart_read (s->channel, offset, +exynos4210_uart_regname (offset), res);return res;case UFSTAT :/* Read Only */ s->reg[I_ (UFSTAT )] =fifo_elements_number (&s->rx) &0xff ;
@@ -446,20 +401,22 @@ static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, s->reg[I_ (UFSTAT )] |= UFSTAT_Rx_FIFO_FULL; s->reg[I_ (UFSTAT )] &= ~0xff ; } +trace_exynos_uart_read (s->channel, offset, +exynos4210_uart_regname (offset), + s->reg[I_ (UFSTAT )]);return s->reg[I_ (UFSTAT )];case URXH :if (s->reg[I_ (UFCON )] &UFCON_FIFO_ENABLE ) {if (fifo_elements_number (&s->rx)) { res =fifo_retrieve (&s->rx); -#if DEBUG_Rx_DATA -fprintf (stderr,"%c" , res); -#endif +trace_exynos_uart_rx (s->channel, res);if (!fifo_elements_number (&s->rx)) { s->reg[I_ (UTRSTAT )] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; }else { s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_BUFFER_DATA_READY; } }else { +trace_exynos_uart_rx_error (s->channel); s->reg[I_ (UINTSP )] |=UINTSP_ERROR ;exynos4210_uart_update_irq (s); res =0 ;
@@ -468,15 +425,22 @@ static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, s->reg[I_ (UTRSTAT )] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; res = s->reg[I_ (URXH )]; } +trace_exynos_uart_read (s->channel, offset, +exynos4210_uart_regname (offset), res);return res;case UTXH : -PRINT_DEBUG ("UART%d: Trying to read from WO register: %s [%04x]\n" , - s->channel,exynos4210_uart_regname (offset), offset); +trace_exynos_uart_wo_read (s->channel,exynos4210_uart_regname (offset), + offset);break ;default : +trace_exynos_uart_read (s->channel, offset, +exynos4210_uart_regname (offset), + s->reg[I_ (offset)]);return s->reg[I_ (offset)]; } +trace_exynos_uart_read (s->channel, offset,exynos4210_uart_regname (offset), +0 );return 0 ; }
@@ -555,7 +519,7 @@ static void exynos4210_uart_reset(DeviceState *dev)fifo_reset (&s->rx);fifo_reset (&s->tx); -PRINT_DEBUG ("UART%d: Rx FIFO size: %d\n" , s->channel, s->rx.size); +trace_exynos_uart_rxsize (s->channel, s->rx.size); }static const VMStateDescription vmstate_exynos4210_uart_fifo = {
hw/char/trace-events +17 -0
@@ -77,3 +77,20 @@ cmsdk_apb_uart_set_params(int speed) "CMSDK APB UART: params set to %d 8N1" # nrf51_uart.c nrf51_uart_read(uint64_t addr, uint64_t r, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" nrf51_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" + +# exynos4210_uart.c +exynos_uart_irq_raised(uint32_t channel, uint32_t reg) "UART%d: IRQ raised: 0x%08"PRIx32 +exynos_uart_irq_lowered(uint32_t channel) "UART%d: IRQ lowered" +exynos_uart_update_params(uint32_t channel, int speed, uint8_t parity, int data, int stop) "UART%d: speed: %d, parity: %c, data bits: %d, stop bits: %d" +exynos_uart_write(uint32_t channel, uint32_t offset, const char *name, uint64_t val) "UART%d: <0x%04x> %s <- 0x%" PRIx64 +exynos_uart_read(uint32_t channel, uint32_t offset, const char *name, uint64_t val) "UART%d: <0x%04x> %s -> 0x%" PRIx64 +exynos_uart_rx_fifo_reset(uint32_t channel) "UART%d: Rx FIFO Reset" +exynos_uart_tx_fifo_reset(uint32_t channel) "UART%d: Tx FIFO Reset" +exynos_uart_tx(uint32_t channel, uint8_t ch) "UART%d: Tx 0x%02"PRIx32 +exynos_uart_intclr(uint32_t channel, uint32_t reg) "UART%d: interrupts cleared: 0x%08"PRIx32 +exynos_uart_ro_write(uint32_t channel, const char *name, uint32_t reg) "UART%d: Trying to write into RO register: %s [0x%04"PRIx32"]" +exynos_uart_rx(uint32_t channel, uint8_t ch) "UART%d: Rx 0x%02"PRIx32 +exynos_uart_rx_error(uint32_t channel) "UART%d: Rx error" +exynos_uart_wo_read(uint32_t channel, const char *name, uint32_t reg) "UART%d: Trying to read from WO register: %s [0x%04"PRIx32"]" +exynos_uart_rxsize(uint32_t channel, uint32_t size) "UART%d: Rx FIFO size: %d" +exynos_uart_channel_error(uint32_t channel) "Wrong UART channel number: %d"
Signature · 1 line
2.17.1
PATCH v3 5/8 hw/char/exynos4210_uart: Implement post_load function
In reply to Guenter RoeckAfter restoring a VM, serial parameters need to be updated to reflect restored register values. Implement a post_load function to handle this situation.
---
v3: Added Reviewed-by: tag.
v2: Additional patch to implement post-load functionality
in exynos uart driver. Required for next patch in series.
hw/char/exynos4210_uart.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
hw/char/exynos4210_uart.c +10 -0
@@ -522,10 +522,20 @@ static void exynos4210_uart_reset(DeviceState *dev)trace_exynos_uart_rxsize (s->channel, s->rx.size); } +static int exynos4210_uart_post_load (void *opaque,int version_id) +{ +Exynos4210UartState *s = (Exynos4210UartState *)opaque; + +exynos4210_uart_update_parameters (s); + +return 0 ; +} +static const VMStateDescription vmstate_exynos4210_uart_fifo = { .name ="exynos4210.uart.fifo" , .version_id =1 , .minimum_version_id =1 , + .post_load = exynos4210_uart_post_load, .fields = (VMStateField []) {VMSTATE_UINT32 (sp, Exynos4210UartFIFO),VMSTATE_UINT32 (rp, Exynos4210UartFIFO),
Signature · 1 line
2.17.1
PATCH v3 6/8 hw/char/exynos4210_uart: Implement Rx FIFO level triggers and timeouts
In reply to Guenter RoeckThe driver already implements a receive FIFO, but it does not handle receive FIFO trigger levels and timeout. Implement the missing functionality.
---
v3: Dropped VMSTATE_TIMER_PTR
Don't call exynos4210_uart_rx_timeout_set() and exynos4210_uart_update_irq() after writes into the UCON register. Chip behavior in this situation is not specified and any handling may be inaccurate, so do nothing.
v2: Call exynos4210_uart_rx_timeout_set() from new post_load function
to set the receive timeout timer.
Add timer to vmstate_exynos4210_uart.
hw/char/exynos4210_uart.c | 117 ++++++++++++++++++++++++++++++-------- hw/char/trace-events | 3 +- 2 files changed, 94 insertions(+), 26 deletions(-)
hw/char/exynos4210_uart.c +92 -25
@@ -24,6 +24,7 @@#include "migration/vmstate.h" #include "qemu/error-report.h" #include "qemu/module.h" +#include "qemu/timer.h" #include "chardev/char-fe.h" #include "chardev/char-serial.h"
@@ -118,6 +119,7 @@ static const Exynos4210UartReg exynos4210_uart_regs[] = {#define ULCON_STOP_BIT_SHIFT 1/* UART Tx/Rx Status */ +#define UTRSTAT_Rx_TIMEOUT 0x8#define UTRSTAT_TRANSMITTER_EMPTY 0x4#define UTRSTAT_Tx_BUFFER_EMPTY 0x2#define UTRSTAT_Rx_BUFFER_DATA_READY 0x1
@@ -147,6 +149,9 @@ typedef struct Exynos4210UartState {Exynos4210UartFIFO rx;Exynos4210UartFIFO tx; +QEMUTimer *fifo_timeout_timer; +uint64_t wordtime;/* word time in ns */ +CharBackend chr;qemu_irq irq;
@@ -209,15 +214,12 @@ static void fifo_reset(Exynos4210UartFIFO *q) q->rp =0 ; } -static uint32_t exynos4210_uart_Tx_FIFO_trigger_level (const Exynos4210UartState *s) +static uint32_t exynos4210_uart_FIFO_trigger_level (uint32_t channel, +uint32_t reg) { -uint32_t level =0 ; -uint32_t reg; +uint32_t level; - reg = (s->reg[I_ (UFCON )] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> - UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; - -switch (s->channel) { +switch (channel) {case 0 : level = reg *32 ;break ;
@@ -231,12 +233,34 @@ static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartStatebreak ;default : level =0 ; -trace_exynos_uart_channel_error (s->channel); +trace_exynos_uart_channel_error (channel); +break ; } -return level; } +static uint32_t +exynos4210_uart_Tx_FIFO_trigger_level (const Exynos4210UartState *s) +{ +uint32_t reg; + + reg = (s->reg[I_ (UFCON )] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> + UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; + +return exynos4210_uart_FIFO_trigger_level (s->channel, reg); +} + +static uint32_t +exynos4210_uart_Rx_FIFO_trigger_level (const Exynos4210UartState *s) +{ +uint32_t reg; + + reg = ((s->reg[I_ (UFCON )] & UFCON_Rx_FIFO_TRIGGER_LEVEL) >> + UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) +1 ; + +return exynos4210_uart_FIFO_trigger_level (s->channel, reg); +} +static void exynos4210_uart_update_irq (Exynos4210UartState *s) {/*
@@ -244,13 +268,25 @@ static void exynos4210_uart_update_irq(Exynos4210UartState *s)* transmit FIFO is smaller than the trigger level. */ if (s->reg[I_ (UFCON )] &UFCON_FIFO_ENABLE ) { -uint32_t count = (s->reg[I_ (UFSTAT )] & UFSTAT_Tx_FIFO_COUNT) >> UFSTAT_Tx_FIFO_COUNT_SHIFT;if (count <=exynos4210_uart_Tx_FIFO_trigger_level (s)) { s->reg[I_ (UINTSP )] |=UINTSP_TXD ; } + +/* +* Rx interrupt if trigger level is reached or if rx timeout +* interrupt is disabled and there is data in the receive buffer +*/ + count =fifo_elements_number (&s->rx); +if ((count && !(s->reg[I_ (UCON )] &0x80 )) || + count >=exynos4210_uart_Rx_FIFO_trigger_level (s)) { + s->reg[I_ (UINTSP )] |=UINTSP_RXD ; +timer_del (s->fifo_timeout_timer); + } + }else if (s->reg[I_ (UTRSTAT )] & UTRSTAT_Rx_BUFFER_DATA_READY) { + s->reg[I_ (UINTSP )] |=UINTSP_RXD ; } s->reg[I_ (UINTP )] = s->reg[I_ (UINTSP )] & ~s->reg[I_ (UINTM )];
@@ -264,6 +300,21 @@ static void exynos4210_uart_update_irq(Exynos4210UartState *s) } } +static void exynos4210_uart_timeout_int (void *opaque) +{ +Exynos4210UartState *s = opaque; + +trace_exynos_uart_rx_timeout (s->channel, s->reg[I_ (UTRSTAT )], + s->reg[I_ (UINTSP )]); + +if ((s->reg[I_ (UTRSTAT )] & UTRSTAT_Rx_BUFFER_DATA_READY) || + (s->reg[I_ (UCON )] & (1 <<11 ))) { + s->reg[I_ (UINTSP )] |=UINTSP_RXD ; + s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_TIMEOUT; +exynos4210_uart_update_irq (s); + } +} +static void exynos4210_uart_update_parameters (Exynos4210UartState *s) {int speed, parity, data_bits, stop_bits;
@@ -302,10 +353,24 @@ static void exynos4210_uart_update_parameters(Exynos4210UartState *s) ssp.data_bits = data_bits; ssp.stop_bits = stop_bits; + s->wordtime =NANOSECONDS_PER_SECOND * (data_bits + stop_bits +1 ) / speed; +qemu_chr_fe_ioctl (&s->chr,CHR_IOCTL_SERIAL_SET_PARAMS , &ssp);trace_exynos_uart_update_params ( - s->channel, speed, parity, data_bits, stop_bits); + s->channel, speed, parity, data_bits, stop_bits, s->wordtime); +} + +static void exynos4210_uart_rx_timeout_set (Exynos4210UartState *s) +{ +if (s->reg[I_ (UCON )] &0x80 ) { +uint32_t timeout = ((s->reg[I_ (UCON )] >>12 ) &0x0f ) * s->wordtime; + +timer_mod (s->fifo_timeout_timer, +qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + timeout); + }else { +timer_del (s->fifo_timeout_timer); + } } static void exynos4210_uart_write(void *opaque, hwaddr offset,
@@ -361,6 +426,10 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,exynos4210_uart_update_irq (s);break ;case UTRSTAT : +if (val & UTRSTAT_Rx_TIMEOUT) { + s->reg[I_ (UTRSTAT )] &= ~UTRSTAT_Rx_TIMEOUT; + } +break ;case UERSTAT :case UFSTAT :case UMSTAT :
@@ -382,6 +451,7 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,break ; } } +static uint64_t exynos4210_uart_read (void *opaque,hwaddr offset,unsigned size) {
@@ -461,7 +531,6 @@ static int exynos4210_uart_can_receive(void *opaque)return fifo_empty_elements_number (&s->rx); } -static void exynos4210_uart_receive (void *opaque,const uint8_t *buf,int size) {Exynos4210UartState *s = (Exynos4210UartState *)opaque;
@@ -469,24 +538,17 @@ static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size)if (s->reg[I_ (UFCON )] &UFCON_FIFO_ENABLE ) {if (fifo_empty_elements_number (&s->rx) < size) { -for (i =0 ; i <fifo_empty_elements_number (&s->rx); i++) { -fifo_store (&s->rx, buf[i]); - } + size =fifo_empty_elements_number (&s->rx); s->reg[I_ (UINTSP )] |=UINTSP_ERROR ; - s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_BUFFER_DATA_READY; - }else { -for (i =0 ; i < size; i++) { -fifo_store (&s->rx, buf[i]); - } - s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_BUFFER_DATA_READY; } -/* XXX: Around here we maybe should check Rx trigger level */ - s->reg[I_ (UINTSP )] |=UINTSP_RXD ; +for (i =0 ; i < size; i++) { +fifo_store (&s->rx, buf[i]); + } +exynos4210_uart_rx_timeout_set (s); }else { s->reg[I_ (URXH )] = buf[0 ]; - s->reg[I_ (UINTSP )] |=UINTSP_RXD ; - s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_BUFFER_DATA_READY; } + s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_BUFFER_DATA_READY;exynos4210_uart_update_irq (s); }
@@ -527,6 +589,7 @@ static int exynos4210_uart_post_load(void *opaque, int version_id)Exynos4210UartState *s = (Exynos4210UartState *)opaque;exynos4210_uart_update_parameters (s); +exynos4210_uart_rx_timeout_set (s);return 0 ; }
@@ -588,6 +651,10 @@ static void exynos4210_uart_init(Object *obj)SysBusDevice *dev =SYS_BUS_DEVICE (obj);Exynos4210UartState *s =EXYNOS4210_UART (dev); + s->fifo_timeout_timer =timer_new_ns (QEMU_CLOCK_VIRTUAL , + exynos4210_uart_timeout_int, s); + s->wordtime =NANOSECONDS_PER_SECOND *10 /9600 ; +/* memory mapping */ memory_region_init_io (&s->iomem, obj, &exynos4210_uart_ops, s,"exynos4210.uart" ,EXYNOS4210_UART_REGS_MEM_SIZE );
hw/char/trace-events +2 -1
@@ -81,7 +81,7 @@ nrf51_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PR # exynos4210_uart.c exynos_uart_irq_raised(uint32_t channel, uint32_t reg) "UART%d: IRQ raised: 0x%08"PRIx32 exynos_uart_irq_lowered(uint32_t channel) "UART%d: IRQ lowered" -exynos_uart_update_params(uint32_t channel, int speed, uint8_t parity, int data, int stop) "UART%d: speed: %d, parity: %c, data bits: %d, stop bits: %d" +exynos_uart_update_params(uint32_t channel, int speed, uint8_t parity, int data, int stop, uint64_t wordtime) "UART%d: speed: %d, parity: %c, data bits: %d, stop bits: %d wordtime: %"PRId64"ns" exynos_uart_write(uint32_t channel, uint32_t offset, const char *name, uint64_t val) "UART%d: <0x%04x> %s <- 0x%" PRIx64 exynos_uart_read(uint32_t channel, uint32_t offset, const char *name, uint64_t val) "UART%d: <0x%04x> %s -> 0x%" PRIx64 exynos_uart_rx_fifo_reset(uint32_t channel) "UART%d: Rx FIFO Reset"
@@ -94,3 +94,4 @@ exynos_uart_rx_error(uint32_t channel) "UART%d: Rx error" exynos_uart_wo_read(uint32_t channel, const char *name, uint32_t reg) "UART%d: Trying to read from WO register: %s [0x%04"PRIx32"]" exynos_uart_rxsize(uint32_t channel, uint32_t size) "UART%d: Rx FIFO size: %d" exynos_uart_channel_error(uint32_t channel) "Wrong UART channel number: %d" +exynos_uart_rx_timeout(uint32_t channel, uint32_t stat, uint32_t intsp) "UART%d: Rx timeout stat=0x%x intsp=0x%x"
Signature · 1 line
2.17.1
PATCH v3 7/8 hw/char/exynos4210_uart: Add receive DMA support
In reply to Guenter RoeckTo support receive DMA, we need to inform the DMA controller if receive data is available. Otherwise the DMA controller keeps requesting data, causing receive errors.
Implement this using an interrupt line. The instantiating code then needs to connect the interrupt with the matching DMA controller GPIO pin.
---
v3: No change
v2: Added Reviewed-by: tag
hw/char/exynos4210_uart.c | 24 ++++++++++++++++++++++++ hw/char/trace-events | 2 ++ 2 files changed, 26 insertions(+)
hw/char/exynos4210_uart.c +24 -0
@@ -154,6 +154,7 @@ typedef struct Exynos4210UartState {CharBackend chr;qemu_irq irq; +qemu_irq dmairq;uint32_t channel;
@@ -261,6 +262,24 @@ exynos4210_uart_Rx_FIFO_trigger_level(const Exynos4210UartState *s)return exynos4210_uart_FIFO_trigger_level (s->channel, reg); } +/* +* Update Rx DMA busy signal if Rx DMA is enabled. For simplicity, +* mark DMA as busy if DMA is enabled and the receive buffer is empty. +*/ +static void exynos4210_uart_update_dmabusy (Exynos4210UartState *s) +{ +bool rx_dma_enabled = (s->reg[I_ (UCON )] &0x03 ) ==0x02 ; +uint32_t count =fifo_elements_number (&s->rx); + +if (rx_dma_enabled && !count) { +qemu_irq_raise (s->dmairq); +trace_exynos_uart_dmabusy (s->channel); + }else { +qemu_irq_lower (s->dmairq); +trace_exynos_uart_dmaready (s->channel); + } +} +static void exynos4210_uart_update_irq (Exynos4210UartState *s) {/*
@@ -282,10 +301,12 @@ static void exynos4210_uart_update_irq(Exynos4210UartState *s) count =fifo_elements_number (&s->rx);if ((count && !(s->reg[I_ (UCON )] &0x80 )) || count >=exynos4210_uart_Rx_FIFO_trigger_level (s)) { +exynos4210_uart_update_dmabusy (s); s->reg[I_ (UINTSP )] |=UINTSP_RXD ;timer_del (s->fifo_timeout_timer); } }else if (s->reg[I_ (UTRSTAT )] & UTRSTAT_Rx_BUFFER_DATA_READY) { +exynos4210_uart_update_dmabusy (s); s->reg[I_ (UINTSP )] |=UINTSP_RXD ; }
@@ -311,6 +332,7 @@ static void exynos4210_uart_timeout_int(void *opaque) (s->reg[I_(UCON)] & (1 << 11))) { s->reg[I_ (UINTSP )] |=UINTSP_RXD ; s->reg[I_ (UTRSTAT )] |= UTRSTAT_Rx_TIMEOUT; +exynos4210_uart_update_dmabusy (s);exynos4210_uart_update_irq (s); } }
@@ -495,6 +517,7 @@ static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, s->reg[I_ (UTRSTAT )] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; res = s->reg[I_ (URXH )]; } +exynos4210_uart_update_dmabusy (s);trace_exynos_uart_read (s->channel, offset,exynos4210_uart_regname (offset), res);return res;
@@ -661,6 +684,7 @@ static void exynos4210_uart_init(Object *obj)sysbus_init_mmio (dev, &s->iomem);sysbus_init_irq (dev, &s->irq); +sysbus_init_irq (dev, &s->dmairq); }static void exynos4210_uart_realize (DeviceState *dev,Error **errp)
hw/char/trace-events +2 -0
@@ -79,6 +79,8 @@ nrf51_uart_read(uint64_t addr, uint64_t r, unsigned int size) "addr 0x%" PRIx64 nrf51_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" # exynos4210_uart.c +exynos_uart_dmabusy(uint32_t channel) "UART%d: DMA busy (Rx buffer empty)" +exynos_uart_dmaready(uint32_t channel) "UART%d: DMA ready" exynos_uart_irq_raised(uint32_t channel, uint32_t reg) "UART%d: IRQ raised: 0x%08"PRIx32 exynos_uart_irq_lowered(uint32_t channel) "UART%d: IRQ lowered" exynos_uart_update_params(uint32_t channel, int speed, uint8_t parity, int data, int stop, uint64_t wordtime) "UART%d: speed: %d, parity: %c, data bits: %d, stop bits: %d wordtime: %"PRId64"ns"
Signature · 1 line
2.17.1
PATCH v3 8/8 hw/arm/exynos4210: Connect serial port DMA busy signals with pl330
In reply to Guenter RoeckThe Exynos4210 serial driver uses an interrupt line to signal if receive data is available. Connect that interrupt with the DMA controller's 'peripheral busy' gpio pin to stop the DMA if there is no more receive data available. Without this patch, receive DMA runs wild and fills the entire receive DMA buffer with invalid data.
---
v3: Added Reviewed-by: tag
Context changes due to increase in number of interrupt lines
v2: Context changes; improved description
This patch has an outstanding review comment, suggesting that uart and pl330 device states should be kept in Exynos4210State. I did not address this comment for a number of reasons. It looks like the problem is hypothetical, the problem may apply to all devices created in exynos4210_realize(), and I am not sure I understand what would need to be done to fix the problem for good (ie for all devices created in the same function which have the same problem). Overall, I think that handling this situation would be better left for a separate patch.
hw/arm/exynos4210.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-)
hw/arm/exynos4210.c +29 -13
@@ -166,8 +166,8 @@ static uint64_t exynos4210_calc_affinity(int cpu)return (0x9 <<ARM_AFF1_SHIFT ) | cpu; } -static void pl330_create (uint32_t base,qemu_or_irq *orgate,qemu_irq irq, -int nreq,int nevents,int width) +static DeviceState *pl330_create (uint32_t base,qemu_or_irq *orgate, +qemu_irq irq,int nreq,int nevents,int width) {SysBusDevice *busdev;DeviceState *dev;
@@ -196,6 +196,7 @@ static void pl330_create(uint32_t base, qemu_or_irq *orgate, qemu_irq irq,sysbus_connect_irq (busdev, i,qdev_get_gpio_in (DEVICE (orgate), i)); }qdev_connect_gpio_out (DEVICE (orgate),0 , irq); +return dev; }static void exynos4210_realize (DeviceState *socdev,Error **errp)
@@ -204,7 +205,7 @@ static void exynos4210_realize(DeviceState *socdev, Error **errp)MemoryRegion *system_mem =get_system_memory ();qemu_irq gate_irq[EXYNOS4210_NCPUS ][EXYNOS4210_IRQ_GATE_NINPUTS ];SysBusDevice *busdev; -DeviceState *dev; +DeviceState *dev, *uart[4 ], *pl330[3 ];int i, n;for (n =0 ; n <EXYNOS4210_NCPUS ; n++) {
@@ -390,19 +391,19 @@ static void exynos4210_realize(DeviceState *socdev, Error **errp)/*** UARTs ***/ -exynos4210_uart_create (EXYNOS4210_UART0_BASE_ADDR , + uart[0 ] =exynos4210_uart_create (EXYNOS4210_UART0_BASE_ADDR ,EXYNOS4210_UART0_FIFO_SIZE ,0 ,serial_hd (0 ), s->irq_table[exynos4210_get_irq (EXYNOS4210_UART_INT_GRP ,0 )]); -exynos4210_uart_create (EXYNOS4210_UART1_BASE_ADDR , + uart[1 ] =exynos4210_uart_create (EXYNOS4210_UART1_BASE_ADDR ,EXYNOS4210_UART1_FIFO_SIZE ,1 ,serial_hd (1 ), s->irq_table[exynos4210_get_irq (EXYNOS4210_UART_INT_GRP ,1 )]); -exynos4210_uart_create (EXYNOS4210_UART2_BASE_ADDR , + uart[2 ] =exynos4210_uart_create (EXYNOS4210_UART2_BASE_ADDR ,EXYNOS4210_UART2_FIFO_SIZE ,2 ,serial_hd (2 ), s->irq_table[exynos4210_get_irq (EXYNOS4210_UART_INT_GRP ,2 )]); -exynos4210_uart_create (EXYNOS4210_UART3_BASE_ADDR , + uart[3 ] =exynos4210_uart_create (EXYNOS4210_UART3_BASE_ADDR ,EXYNOS4210_UART3_FIFO_SIZE ,3 ,serial_hd (3 ), s->irq_table[exynos4210_get_irq (EXYNOS4210_UART_INT_GRP ,3 )]);
@@ -450,12 +451,27 @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) s->irq_table[exynos4210_get_irq(28, 3)]);/*** DMA controllers ***/ -pl330_create (EXYNOS4210_PL330_BASE0_ADDR , &s->pl330_irq_orgate[0 ], - s->irq_table[exynos4210_get_irq (21 ,0 )],32 ,32 ,32 ); -pl330_create (EXYNOS4210_PL330_BASE1_ADDR , &s->pl330_irq_orgate[1 ], - s->irq_table[exynos4210_get_irq (21 ,1 )],32 ,32 ,32 ); -pl330_create (EXYNOS4210_PL330_BASE2_ADDR , &s->pl330_irq_orgate[2 ], - s->irq_table[exynos4210_get_irq (20 ,1 )],1 ,31 ,64 ); + pl330[0 ] =pl330_create (EXYNOS4210_PL330_BASE0_ADDR , + &s->pl330_irq_orgate[0 ], + s->irq_table[exynos4210_get_irq (21 ,0 )], +32 ,32 ,32 ); + pl330[1 ] =pl330_create (EXYNOS4210_PL330_BASE1_ADDR , + &s->pl330_irq_orgate[1 ], + s->irq_table[exynos4210_get_irq (21 ,1 )], +32 ,32 ,32 ); + pl330[2 ] =pl330_create (EXYNOS4210_PL330_BASE2_ADDR , + &s->pl330_irq_orgate[2 ], + s->irq_table[exynos4210_get_irq (20 ,1 )], +1 ,31 ,64 ); + +sysbus_connect_irq (SYS_BUS_DEVICE (uart[0 ]),1 , +qdev_get_gpio_in (pl330[0 ],15 )); +sysbus_connect_irq (SYS_BUS_DEVICE (uart[1 ]),1 , +qdev_get_gpio_in (pl330[1 ],15 )); +sysbus_connect_irq (SYS_BUS_DEVICE (uart[2 ]),1 , +qdev_get_gpio_in (pl330[0 ],17 )); +sysbus_connect_irq (SYS_BUS_DEVICE (uart[3 ]),1 , +qdev_get_gpio_in (pl330[1 ],17 )); }static void exynos4210_init (Object *obj)
Signature · 1 line
2.17.1
Peter Maydell
AppliedQuoted 13 lines · Guenter Roeck
Commit
59520dc65e("hw/arm/exynos4210: Add DMA support for the Exynos4210") introduced DMA support for Exynos4210. Unfortunately, it never really worked. DMA interrupt line and polarity was wrong, and the serial port needs extra code to support DMA. This patch series fixes the problem.The series also converts pl330 and
exynos4210_uartcode to support tracing. While not strictly necessary, this was very useful for debugging, and it seemed too valuable to drop it from the final series. Similar, improved support for receive FIFO handling is not strictly necessary to fix DMA handling, but I initially thought that it was and added the code. Like tracing support it seemed too valuable to drop it.
Quoted 5 lines
The series was tested with qemu's smdkc210 and nuri emulations and with exynos4210-smdkv310.dtb. Without the series, the emulation does not react to serial line input, and serial line output stalls when using DMA. With this series in place, serial line input is handled correctly, serial output does not stall, and DMA interrupts are observed and handled.
Applied to target-arm.next, thanks.
-- PMM
Quoted 14 lines · Peter Maydell
Quoted 13 lines · Guenter Roeck
Commit
59520dc65e("hw/arm/exynos4210: Add DMA support for the Exynos4210") introduced DMA support for Exynos4210. Unfortunately, it never really worked. DMA interrupt line and polarity was wrong, and the serial port needs extra code to support DMA. This patch series fixes the problem.The series also converts pl330 and
exynos4210_uartcode to support tracing. While not strictly necessary, this was very useful for debugging, and it seemed too valuable to drop it from the final series. Similar, improved support for receive FIFO handling is not strictly necessary to fix DMA handling, but I initially thought that it was and added the code. Like tracing support it seemed too valuable to drop it.
Quoted 8 lines
Quoted 5 lines
The series was tested with qemu's smdkc210 and nuri emulations and with exynos4210-smdkv310.dtb. Without the series, the emulation does not react to serial line input, and serial line output stalls when using DMA. With this series in place, serial line input is handled correctly, serial output does not stall, and DMA interrupts are observed and handled.
Applied to target-arm.next, thanks.
Thanks a lot for your help!
Guenter