Skip to contentSkip to conversation

cmd: env: add option for quiet output on env info

PATCH Superseded Patrick Delaunay 3 participants 11 messages Jan 24, 2020 – Feb 10, 2020

Subsystems (3)

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/5 cmd: env: add option for quiet output on env info

The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default environment is used and persistent storage is managed with:
if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces First boot:
Default environment is used
Environment can be persisted
Saving Environment to EXT4... File System is consistent

Next boot:
Environment was loaded from persistent storage Environment can be persisted

---

 cmd/Kconfig  |  1 +
 cmd/nvedit.c | 26 +++++++++++++++++++-------
 2 files changed, 20 insertions(+), 7 deletions(-)
cmd/Kconfig +1 -0
index b1a1cbcab2..458dbcedac 100644
@@ -567,6 +567,7 @@ config CMD_NVEDIT_INFO
 	  This command can be optionally used for evaluation in scripts:
 	  [-d] : evaluate whether default environment is used
 	  [-p] : evaluate whether environment can be persisted
+	  [-q] : quiet output
 	  The result of multiple evaluations will be combined with AND.
 
 endmenu
cmd/nvedit.c +19 -7
index 81d94cd193..aaa032cd96 100644
@@ -1219,12 +1219,15 @@ static int print_env_info(void)
  * env info - display environment information
  * env info [-d] - evaluate whether default environment is used
  * env info [-p] - evaluate whether environment can be persisted
+ *      Add [-q] - quiet mode, use only for command result, for test by example:
+ *                 test env info -p -d -q
  */
 static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 		       int argc, char * const argv[])
 {
 	int eval_flags = 0;
 	int eval_results = 0;
+	bool quiet = false;
 
 	/* display environment information */
 	if (argc <= 1)
@@ -1242,6 +1245,9 @@ static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 			case 'p':
 				eval_flags |= ENV_INFO_IS_PERSISTED;
 				break;
+			case 'q':
+				quiet = true;
+				break;
 			default:
 				return CMD_RET_USAGE;
 			}
@@ -1251,20 +1257,24 @@ static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 	/* evaluate whether default environment is used */
 	if (eval_flags & ENV_INFO_IS_DEFAULT) {
 		if (gd->flags & GD_FLG_ENV_DEFAULT) {
-			printf("Default environment is used\n");
+			if (!quiet)
+				printf("Default environment is used\n");
 			eval_results |= ENV_INFO_IS_DEFAULT;
 		} else {
-			printf("Environment was loaded from persistent storage\n");
+			if (!quiet)
+				printf("Environment was loaded from persistent storage\n");
 		}
 	}
 
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {
 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
-		printf("Environment can be persisted\n");
+		if (!quiet)
+			printf("Environment can be persisted\n");
 		eval_results |= ENV_INFO_IS_PERSISTED;
 #else
-		printf("Environment cannot be persisted\n");
+		if (!quiet)
+			printf("Environment cannot be persisted\n");
 #endif
 	}
 
@@ -1321,7 +1331,7 @@ static cmd_tbl_t cmd_env_sub[] = {
 	U_BOOT_CMD_MKENT(import, 5, 0, do_env_import, "", ""),
 #endif
 #if defined(CONFIG_CMD_NVEDIT_INFO)
-	U_BOOT_CMD_MKENT(info, 2, 0, do_env_info, "", ""),
+	U_BOOT_CMD_MKENT(info, 3, 0, do_env_info, "", ""),
 #endif
 	U_BOOT_CMD_MKENT(print, CONFIG_SYS_MAXARGS, 1, do_env_print, "", ""),
 #if defined(CONFIG_CMD_RUN)
@@ -1400,8 +1410,10 @@ static char env_help_text[] =
 #endif
 #if defined(CONFIG_CMD_NVEDIT_INFO)
 	"env info - display environment information\n"
-	"env info [-d] - whether default environment is used\n"
-	"env info [-p] - whether environment can be persisted\n"
+	"env info [-d] [-p] [-q] - evaluate environment information\n"
+	"      \"-d\": default environment is used\n"
+	"      \"-p\": environment can be persisted\n"
+	"      \"-q\": quiet output\n"
 #endif
 	"env print [-a | name ...] - print environment\n"
 #if defined(CONFIG_CMD_NVEDIT_EFI)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 2/5 cmd: env: use ENV_IS_IN_DEVICE in env info

Use the define ENV_IS_IN_DEVICE to test if one the CONFIG_ENV_IS_IN_... is defined and correct the detection of persistent storage support in the command "env info" if CONFIG_ENV_IS_NOWHERE is activated.

Since commit 60d5ed2593c9 ("env: allow ENV_IS_NOWHERE with other storage target") test CONFIG_ENV_IS_NOWHERE is not enough; see also commit 953db29a1e9c6 ("env: enable saveenv command when one CONFIG_ENV_IS_IN is activated").

This patch avoids issue for this command in stm32mp1 platform.

---

 cmd/nvedit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
cmd/nvedit.c +1 -1
index aaa032cd96..3d1054e763 100644
@@ -1268,7 +1268,7 @@ static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+#if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
 		if (!quiet)
 			printf("Environment can be persisted\n");
 		eval_results |= ENV_INFO_IS_PERSISTED;
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/5 cmd: env: use ENV_IS_IN_DEVICE in env info

Quoted 11 lines · Patrick Delaunay

Use the define ENV_IS_IN_DEVICE to test if one the CONFIG_ENV_IS_IN_... is defined and correct the detection of persistent storage support in the command "env info" if CONFIG_ENV_IS_NOWHERE is activated.

Since commit 60d5ed2593c9 ("env: allow ENV_IS_NOWHERE with other storage target") test CONFIG_ENV_IS_NOWHERE is not enough; see also commit 953db29a1e9c6 ("env: enable saveenv command when one CONFIG_ENV_IS_IN is activated").

Quoted 7 lines

This patch avoids issue for this command in stm32mp1 platform.

---

 cmd/nvedit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

We should add more tests for the environment functionality.

#3 lore raw

PATCH 2/5 cmd: env: use ENV_IS_IN_DEVICE in env info

Hi Simon,

Quoted 21 lines

From: Simon Glass <[email protected]>
Sent: jeudi 30 janvier 2020 03:18

Quoted 16 lines · Patrick Delaunay

Use the define ENV_IS_IN_DEVICE to test if one the CONFIG_ENV_IS_IN_... is defined and correct the detection of persistent storage support in the command "env info" if CONFIG_ENV_IS_NOWHERE is activated.

Since commit 60d5ed2593c9 ("env: allow ENV_IS_NOWHERE with other storage target") test CONFIG_ENV_IS_NOWHERE is not enough; see also commit 953db29a1e9c6 ("env: enable saveenv command when one CONFIG_ENV_IS_IN is activated").

This patch avoids issue for this command in stm32mp1 platform.

---

Quoted 6 lines
Quoted 2 lines
 cmd/nvedit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

We should add more tests for the environment functionality.

Sorry for the delay,

I need to activate a location in sandbox to test this feature....

I am working on a other serie for it (I am trying to add test for env in EXT4).

Patrick

#4 lore raw

PATCH 3/5 cmd: env: check real location for env info command

In reply to Patrick Delaunay

Check the current ENV location, dynamically provided by the weak function env_get_location to be sure that the environment can be persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board dynamically select the available storage location (according boot device for example).

This patch solves issue for stm32mp1 platform, when the boot device is USB.

---

 cmd/nvedit.c           | 13 ++++++++++---
 env/env.c              | 18 ------------------
 include/env_internal.h | 20 ++++++++++++++++++++
 3 files changed, 30 insertions(+), 21 deletions(-)
cmd/nvedit.c +10 -3
index 3d1054e763..a37b7c094a 100644
@@ -1269,9 +1269,16 @@ static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {
 #if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
-		if (!quiet)
-			printf("Environment can be persisted\n");
-		eval_results |= ENV_INFO_IS_PERSISTED;
+		enum env_location loc = env_get_location(ENVOP_SAVE,
+							 gd->env_load_prio);
+		if (ENVL_NOWHERE != loc && ENVL_UNKNOWN != loc) {
+			if (!quiet)
+				printf("Environment can be persisted\n");
+			eval_results |= ENV_INFO_IS_PERSISTED;
+		} else {
+			if (!quiet)
+				printf("Environment cannot be persisted\n");
+		}
 #else
 		if (!quiet)
 			printf("Environment cannot be persisted\n");
env/env.c +0 -18
index 9237bb9c74..4e7a3c0c48 100644
@@ -105,24 +105,6 @@ static void env_set_inited(enum env_location location)
 	gd->env_has_init |= BIT(location);
 }
 
-/**
- * env_get_location() - Returns the best env location for a board
- * @op: operations performed on the environment
- * @prio: priority between the multiple environments, 0 being the
- *        highest priority
- *
- * This will return the preferred environment for the given priority.
- * This is overridable by boards if they need to.
- *
- * All implementations are free to use the operation, the priority and
- * any other data relevant to their choice, but must take into account
- * the fact that the lowest prority (0) is the most important location
- * in the system. The following locations should be returned by order
- * of descending priorities, from the highest to the lowest priority.
- *
- * Returns:
- * an enum env_location value on success, a negative error code otherwise
- */
 __weak enum env_location env_get_location(enum env_operation op, int prio)
 {
 	if (prio >= ARRAY_SIZE(env_locations))
include/env_internal.h +20 -0
index 90a4df8a72..af29ff0cd6 100644
@@ -209,6 +209,26 @@ struct env_driver {
 
 extern struct hsearch_data env_htab;
 
+/**
+ * env_get_location() - Returns the best env location for a board
+ * @op: operations performed on the environment
+ * @prio: priority between the multiple environments, 0 being the
+ *        highest priority
+ *
+ * This will return the preferred environment for the given priority.
+ * This is overridable by boards if they need to.
+ *
+ * All implementations are free to use the operation, the priority and
+ * any other data relevant to their choice, but must take into account
+ * the fact that the lowest prority (0) is the most important location
+ * in the system. The following locations should be returned by order
+ * of descending priorities, from the highest to the lowest priority.
+ *
+ * Returns:
+ * an enum env_location value on success, a negative error code otherwise
+ */
+enum env_location env_get_location(enum env_operation op, int prio);
+
 #endif /* DO_DEPS_ONLY */
 
 #endif /* _ENV_INTERNAL_H_ */
Signature · 1 line
2.17.1
#5 lore raw

PATCH 3/5 cmd: env: check real location for env info command

Dear Patrick Delaunay,

Quoted 24 lines · In message <20200124133332.3.I42c79507524e5ad68e85fd60bbd686c4c59523ae@changeid…

Check the current ENV location, dynamically provided by the weak function env_get_location to be sure that the environment can be persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board dynamically select the available storage location (according boot device for example).

This patch solves issue for stm32mp1 platform, when the boot device is USB.

---

 cmd/nvedit.c           | 13 ++++++++++---
 env/env.c              | 18 ------------------
 include/env_internal.h | 20 ++++++++++++++++++++
 3 files changed, 30 insertions(+), 21 deletions(-)
cmd/nvedit.c +0 -0
index 3d1054e763..a37b7c094a 100644

cmd/nvedit.c static int do_env_info(cmd_tbl_t *cmdtp, int flag, · line 1272

Quoted 7 lines
cmd/nvedit.c +1 -3
@@ -1269,9 +1269,16 @@ static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {
 #if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
-		if (!quiet)
-			printf("Environment can be persisted\n");
-		eval_results |= ENV_INFO_IS_PERSISTED;
+		enum env_location loc = env_get_location(ENVOP_SAVE,

Please do not declare variables right in the middle of the code!

Quoted 14 lines
cmd/nvedit.c +1 -9
+++ b/env/env.c
@@ -105,24 +105,6 @@ static void env_set_inited(enum env_location location)
 	gd->env_has_init |= BIT(location);
 }
 
-/**
- * env_get_location() - Returns the best env location for a board
- * @op: operations performed on the environment
- * @prio: priority between the multiple environments, 0 being the
- *        highest priority
- *
- * This will return the preferred environment for the given priority.
- * This is overridable by boards if they need to.
- *

cmd/nvedit.c static void env_set_inited(enum env_location location) · line 108

Quoted 10 lines
cmd/nvedit.c +0 -9
- * All implementations are free to use the operation, the priority and
- * any other data relevant to their choice, but must take into account
- * the fact that the lowest prority (0) is the most important location
- * in the system. The following locations should be returned by order
- * of descending priorities, from the highest to the lowest priority.
- *
- * Returns:
- * an enum env_location value on success, a negative error code otherwise
- */
 __weak enum env_location env_get_location(enum env_operation op, int prio)

I think it is a really bad idea to remove the comment from the implementation. Please keep it here.

Quoted 15 lines
include/env_internal.h +9 -0
@@ -209,6 +209,26 @@ struct env_driver {
 
 extern struct hsearch_data env_htab;
 
+/**
+ * env_get_location() - Returns the best env location for a board
+ * @op: operations performed on the environment
+ * @prio: priority between the multiple environments, 0 being the
+ *        highest priority
+ *
+ * This will return the preferred environment for the given priority.
+ * This is overridable by boards if they need to.
+ *

include/env_internal.h struct env_driver { · line 230

Quoted 10 lines
include/env_internal.h +10 -0
+ * All implementations are free to use the operation, the priority and
+ * any other data relevant to their choice, but must take into account
+ * the fact that the lowest prority (0) is the most important location
+ * in the system. The following locations should be returned by order
+ * of descending priorities, from the highest to the lowest priority.
+ *
+ * Returns:
+ * an enum env_location value on success, a negative error code otherwise
+ */
+enum env_location env_get_location(enum env_operation op, int prio);

If absolutely necessary, copuy only what is needed for API documentation.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"This is a test of the Emergency Broadcast System. If this had been an
actual emergency, do you really think we'd stick around to tell you?"
#6 lore raw

PATCH 3/5 cmd: env: check real location for env info command

Hi Wolfgang,

Quoted 27 lines

From: Wolfgang Denk <[email protected]>
Sent: vendredi 24 janvier 2020 14:17

Dear Patrick Delaunay,

In message <20200124133332.3.I42c79507524e5ad68e85fd60bbd686c4c59523ae@changeid>

Quoted 19 lines · you

Check the current ENV location, dynamically provided by the weak function env_get_location to be sure that the environment can be persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board dynamically select the available storage location (according boot device for example).

This patch solves issue for stm32mp1 platform, when the boot device is USB.

---

 cmd/nvedit.c           | 13 ++++++++++---
 env/env.c              | 18 ------------------
 include/env_internal.h | 20 ++++++++++++++++++++
 3 files changed, 30 insertions(+), 21 deletions(-)
Quoted 14 lines

cmd/nvedit.c static int do_env_info(cmd_tbl_t *cmdtp, int flag, · line 1272

Quoted 12 lines
cmd/nvedit.c index 3d1054e763..a37b7c094a renamed from cmd/nvedit.c +0 -0

100644

cmd/nvedit.c +1 -3
@@ -1269,9 +1269,16 @@ static int do_env_info(cmd_tbl_t *cmdtp, int flag,
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {  #if
 defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
-		if (!quiet)
-			printf("Environment can be persisted\n");
-		eval_results |= ENV_INFO_IS_PERSISTED;
+		enum env_location loc = env_get_location(ENVOP_SAVE,

Please do not declare variables right in the middle of the code!

Yes, I will modify it....
I am surprised that this issue pas the check patch.

Quoted 25 lines
Quoted 25 lines
cmd/nvedit.c +1 -10
+++ b/env/env.c
@@ -105,24 +105,6 @@ static void env_set_inited(enum env_location location)
 	gd->env_has_init |= BIT(location);
 }
 
-/**
- * env_get_location() - Returns the best env location for a board
- * @op: operations performed on the environment
- * @prio: priority between the multiple environments, 0 being the
- *        highest priority
- *
- * This will return the preferred environment for the given priority.
- * This is overridable by boards if they need to.
- *
- * All implementations are free to use the operation, the priority

and
- * any other data relevant to their choice, but must take into account
- * the fact that the lowest prority (0) is the most important location
- * in the system. The following locations should be returned by order
- * of descending priorities, from the highest to the lowest priority.
- *
- * Returns:

Quoted 8 lines
Quoted 5 lines

- * an enum env_location value on success, a negative error code otherwise
- */
__weak enum env_location env_get_location(enum env_operation op, int
prio)

I think it is a really bad idea to remove the comment from the implementation. Please keep it here.

Yes I agree .
I will come back on this par.

Quoted 22 lines
Quoted 22 lines
include/env_internal.h +16 -0
@@ -209,6 +209,26 @@ struct env_driver {
 
 extern struct hsearch_data env_htab;
 
+/**
+ * env_get_location() - Returns the best env location for a board
+ * @op: operations performed on the environment
+ * @prio: priority between the multiple environments, 0 being the
+ *        highest priority
+ *
+ * This will return the preferred environment for the given priority.
+ * This is overridable by boards if they need to.
+ *
+ * All implementations are free to use the operation, the priority
+and
+ * any other data relevant to their choice, but must take into
+account
+ * the fact that the lowest prority (0) is the most important
+location
+ * in the system. The following locations should be returned by order
Quoted 8 lines

include/env_internal.h struct env_driver {

Quoted 6 lines
include/env_internal.h +6 -0
+ * of descending priorities, from the highest to the lowest priority.
+ *
+ * Returns:
+ * an enum env_location value on success, a negative error code
+otherwise  */ enum env_location env_get_location(enum env_operation
+op, int prio);

If absolutely necessary, copuy only what is needed for API documentation.

Ok

Quoted 10 lines

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "This is a test of the Emergency Broadcast System. If this had been an actual emergency, do you really think we'd stick around to tell you?"

Thanks

Patrick

#7 lore raw

PATCH 4/5 stm32mp1: use the command env info in env_check

In reply to Patrick Delaunay

Activate CMD_NVEDIT_INFO and use the new command "env info -d -p -q" to automatically save the environment on first boot.

This patch allows to remove the env_default variable.

---

 arch/arm/mach-stm32mp/Kconfig | 1 +
 include/configs/stm32mp1.h    | 4 +---
 2 files changed, 2 insertions(+), 3 deletions(-)
arch/arm/mach-stm32mp/Kconfig +1 -0
index 137178aa45..63dc94f894 100644
@@ -45,6 +45,7 @@ config STM32MP15x
 	select STM32_RESET
 	select STM32_SERIAL
 	select SYS_ARCH_TIMER
+	imply CMD_NVEDIT_INFO
 	imply SYSRESET_PSCI if STM32MP1_TRUSTED
 	imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
 	help
include/configs/stm32mp1.h +1 -3
index a66534e027..02d32f2040 100644
@@ -218,9 +218,7 @@
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"altbootcmd=run bootcmd\0" \
-	"env_default=1\0" \
-	"env_check=if test $env_default -eq 1;"\
-		" then env set env_default 0;env save;fi\0" \
+	"env_check=if env info -p -d -q; then env save; fi\0" \
 	STM32MP_BOOTCMD \
 	STM32MP_MTDPARTS \
 	STM32MP_DFU_ALT_RAM \
Signature · 1 line
2.17.1
#8 lore raw

PATCH 5/5 stm32mp1: configs: activate CMD_ERASEENV

In reply to Patrick Delaunay

Activate the command env erase to reset the environment with the command:

Quoted 1 line

env erase

it is simpler than:

Quoted 2 lines

env default -a
env save

---

 configs/stm32mp15_basic_defconfig   | 1 +
 configs/stm32mp15_optee_defconfig   | 1 +
 configs/stm32mp15_trusted_defconfig | 1 +
 3 files changed, 3 insertions(+)
configs/stm32mp15_basic_defconfig +1 -0
index 0b646da2b1..4e743561df 100644
@@ -26,6 +26,7 @@ CONFIG_SYS_PROMPT="STM32MP> "
 # CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_ERASEENV=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_ADC=y
configs/stm32mp15_optee_defconfig +1 -0
index b45462b2f0..d597a13123 100644
@@ -15,6 +15,7 @@ CONFIG_SYS_PROMPT="STM32MP> "
 # CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_ERASEENV=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_ADC=y
configs/stm32mp15_trusted_defconfig +1 -0
index 5dc530f1ab..2804df0a12 100644
@@ -14,6 +14,7 @@ CONFIG_SYS_PROMPT="STM32MP> "
 # CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_ERASEENV=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_ADC=y
Signature · 1 line
2.17.1
#9 lore raw

PATCH 1/5 cmd: env: add option for quiet output on env info

In reply to Patrick Delaunay
Quoted 20 lines · Patrick Delaunay

The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default environment is used and persistent storage is managed with:
if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces First boot:
Default environment is used
Environment can be persisted
Saving Environment to EXT4... File System is consistent

Next boot:
Environment was loaded from persistent storage Environment can be persisted

Quoted 6 lines

---

 cmd/Kconfig  |  1 +
 cmd/nvedit.c | 26 +++++++++++++++++++-------
 2 files changed, 20 insertions(+), 7 deletions(-)

We could have a test for this command

#10 lore raw

PATCH 1/5 cmd: env: add option for quiet output on env info

Hi,

Quoted 24 lines

From: Simon Glass <[email protected]>
Sent: jeudi 30 janvier 2020 03:18

Quoted 19 lines · Patrick Delaunay

The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default environment is used and persistent storage is managed with:
if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces First boot:
Default environment is used
Environment can be persisted
Saving Environment to EXT4... File System is consistent

Next boot:
Environment was loaded from persistent storage Environment can be persisted

Quoted 8 lines
Quoted 6 lines

---

 cmd/Kconfig  |  1 +
 cmd/nvedit.c | 26 +++++++++++++++++++-------
 2 files changed, 20 insertions(+), 7 deletions(-)

Thanks for the review

Quoted 1 line

We could have a test for this command

Yes, I will do it.

Regards

Patrick