Skip to contentSkip to conversation

4.9.212-stable review

PATCH In review Greg Kroah-Hartman 8 participants 283 messages Jan 28, 2020 – Jan 29, 2020 Page 1 of 2

Subsystems (7)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.9.212-stable review

This is the start of the stable review cycle for the 4.9.212 release. There are 271 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 30 Jan 2020 13:57:09 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.212-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.9.212-rc1

Martin Schiller <[email protected]>
net/x25: fix nonblocking connect

Kadlecsik József <[email protected]>
netfilter: ipset: use bitmap infrastructure completely

Andy Shevchenko <[email protected]>
bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()

Andy Shevchenko <[email protected]>
md: Avoid namespace collision with bitmap API

Bo Wu <[email protected]>
scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func

Dan Carpenter <[email protected]>
bcache: silence static checker warning

Wen Huang <[email protected]>
libertas: Fix two buffer overflows at parsing bss descriptor

Suzuki K Poulose <[email protected]>
coresight: tmc-etf: Do not call smp_processor_id from preemptible

Suzuki K Poulose <[email protected]>
coresight: etb10: Do not call smp_processor_id from preemptible

Will Deacon <[email protected]>
arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field

Jeremy Linton <[email protected]>
Documentation: Document arm64 kpti control

Al Viro <[email protected]>

    do_last(): fetch directory ->i_mode and ->i_uid before it's too late

Changbin Du <[email protected]>
tracing: xen: Ordered comparison of function pointers

Bart Van Assche <[email protected]>
scsi: RDMA/isert: Fix a recently introduced regression related to logout

Gilles Buloz <[email protected]>
hwmon: (nct7802) Fix voltage limits to wrong registers

Chuhong Yuan <[email protected]>
Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register

Johan Hovold <[email protected]>
Input: pegasus_notetaker - fix endpoint sanity check

Johan Hovold <[email protected]>
Input: aiptek - fix endpoint sanity check

Johan Hovold <[email protected]>
Input: gtco - fix endpoint sanity check

Johan Hovold <[email protected]>
Input: sur40 - fix interface sanity checks

Michał Mirosław <[email protected]>
mmc: sdhci: fix minimum clock rate for v3 controller

Michał Mirosław <[email protected]>
mmc: tegra: fix SDR50 tuning override

Alex Sverdlin <[email protected]>
ARM: 8950/1: ftrace/recordmcount: filter relocation types

Johan Hovold <[email protected]>
Input: keyspan-remote - fix control-message timeouts

Guenter Roeck <[email protected]>
hwmon: (core) Do not use device managed functions for memory allocations

Dmitry Osipenko <[email protected]>
hwmon: (core) Fix double-free in __hwmon_device_register()

Linus Walleij <[email protected]>
hwmon: Deal with errors from the thermal subsystem

Guenter Roeck <[email protected]>
hwmon: (core) Simplify sysfs attribute name allocation

Luuk Paulussen <[email protected]>
hwmon: (adt7475) Make volt2reg return same reg as reg2volt input

Eric Dumazet <[email protected]>
gtp: make sure only SOCK_DGRAM UDP sockets are accepted

James Hughes <[email protected]>
net: usb: lan78xx: Add .ndo_features_check

Wen Yang <[email protected]>
tcp_bbr: improve arithmetic division in bbr_update_bw()

Cong Wang <[email protected]>
net_sched: fix datalen for ematch

William Dauchy <[email protected]>
net, ip_tunnel: fix namespaces move

William Dauchy <[email protected]>
net, ip6_tunnel: fix namespaces move

Michael Ellerman <[email protected]>
net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM

Wenwen Wang <[email protected]>
firestream: fix memory leaks

Richard Palethorpe <[email protected]>

    can, slip: Protect tty->disc_data in write_wakeup and close with RCU

Florian Fainelli <[email protected]>
net: phy: Keep reporting transceiver type

Florian Fainelli <[email protected]>
net: ethtool: Add back transceiver type

Finn Thain <[email protected]>
m68k: Call timer_interrupt() with interrupts disabled

Max Gurtovoy <[email protected]>
IB/iser: Fix dma_nents type definition

Andre Przywara <[email protected]>
arm64: dts: juno: Fix UART frequency

Sam Bobroff <[email protected]>
drm/radeon: fix bad DMA from INTERRUPT_CNTL2

Chuhong Yuan <[email protected]>
dmaengine: ti: edma: fix missed failure handling

Eric Dumazet <[email protected]>
packet: fix data-race in fanout_flow_is_huge()

Eric Dumazet <[email protected]>
net: neigh: use long type to store jiffies delta

Tiezhu Yang <[email protected]>
MIPS: Loongson: Fix return value of loongson_hwmon_init

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix some format attributes not under control

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix incorrect use of JPEG colorspace

Marc Dionne <[email protected]>
afs: Fix large file support

Stefan Wahren <[email protected]>
net: qca_spi: Move reset_count to struct qcaspi

Jakub Kicinski <[email protected]>
net: netem: correct the parent's backlog when corrupted packet was dropped

Jakub Kicinski <[email protected]>
net: netem: fix error path for corrupted GSO frames

Robin Gong <[email protected]>
dmaengine: imx-sdma: fix size check for sdma script_number

Jeffrey Hugo <[email protected]>
drm/msm/dsi: Implement reset correctly

YueHaibing <[email protected]>
act_mirred: Fix mirred_init_module error handling

Antonio Borneo <[email protected]>
net: stmmac: fix length of PTP clock's name string

Eric Biggers <[email protected]>
llc: fix sk_buff refcounting in llc_conn_state_process()

Eric Biggers <[email protected]>
llc: fix another potential sk_buff leak in llc_ui_sendmsg()

Johannes Berg <[email protected]>
mac80211: accept deauth frames in IBSS mode

Jose Abreu <[email protected]>
net: stmmac: gmac4+: Not all Unicast addresses may be available

Ard Biesheuvel <[email protected]>
nvme: retain split access workaround for capability reads

Dan Carpenter <[email protected]>
net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()

Dan Carpenter <[email protected]>
of: mdio: Fix a signedness bug in of_phy_get_and_connect()

Dan Carpenter <[email protected]>
net: stmmac: dwmac-meson8b: Fix signedness bug in probe

Dan Carpenter <[email protected]>
net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe()

Dan Carpenter <[email protected]>
net: hisilicon: Fix signedness bug in hix5hd2_dev_probe()

Filippo Sironi <[email protected]>
iommu/amd: Wait for completion of IOTLB flush in attach_device

Gerd Rausch <[email protected]>
net/rds: Fix 'ib_evt_handler_call' element in 'rds_ib_stat_names'

Mao Wenan <[email protected]>
net: sonic: replace dev_kfree_skb in sonic_send_packet

Dan Robertson <[email protected]>
hwmon: (shtc1) fix shtc1 and shtw1 id mask

Filipe Manana <[email protected]>
Btrfs: fix hang when loading existing inode cache off disk

Mao Wenan <[email protected]>
net: sonic: return NETDEV_TX_OK if failed to map buffer

Lorenzo Bianconi <[email protected]>
ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init

Colin Ian King <[email protected]>
iio: dac: ad5380: fix incorrect assignment to val

Colin Ian King <[email protected]>
bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA

Dan Carpenter <[email protected]>
staging: greybus: light: fix a couple double frees

Masami Hiramatsu <[email protected]>
x86, perf: Fix the dependency of the x86 insn decoder selftest

Stephen Boyd <[email protected]>
power: supply: Init device wakeup after device_add()

Guenter Roeck <[email protected]>
hwmon: (lm75) Fix write operations for negative temperatures

Linus Torvalds <[email protected]>
Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"

Andy Shevchenko <[email protected]>
ahci: Do not export local variable ahci_em_messages

Nick Desaulniers <[email protected]>
mips: avoid explicit UB in assignment of mips_io_port_base

Felix Fietkau <[email protected]>
mac80211: minstrel_ht: fix per-group max throughput rate initialization

Andy Shevchenko <[email protected]>
dmaengine: dw: platform: Switch to acpi_dma_controller_register()

Maxime Ripard <[email protected]>
ASoC: sun4i-i2s: RX and TX counter registers are swapped

Eric W. Biederman <[email protected]>
signal: Allow cifs and drbd to receive their terminating signals

YueHaibing <[email protected]>
ASoC: wm8737: Fix copy-paste error in wm8737_snd_controls

YueHaibing <[email protected]>

    ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'

YueHaibing <[email protected]>
ASoC: es8328: Fix copy-paste error in es8328_right_line_controls

Colin Ian King <[email protected]>
ext4: set error return correctly when ext4_htree_store_dirent fails

Iuliana Prodan <[email protected]>
crypto: caam - free resources in case caam_rng registration failed

Steve French <[email protected]>
cifs: fix rmmod regression in cifs.ko caused by force_sig changes

Mark Zhang <[email protected]>
net/mlx5: Fix mlx5_ifc_query_lag_out_bits

Johannes Berg <[email protected]>
ALSA: aoa: onyx: always initialize register read value

Thomas Gleixner <[email protected]>
x86/kgbd: Use NMI_VECTOR not APIC_DM_NMI

Arnd Bergmann <[email protected]>
mic: avoid statically declaring a 'struct device'.

Ruslan Bilovol <[email protected]>
usb: host: xhci-hub: fix extra endianness conversion

Arnd Bergmann <[email protected]>
qed: reduce maximum stack frame size

YueHaibing <[email protected]>
libertas_tf: Use correct channel range in lbtf_geo_init

Colin Ian King <[email protected]>
scsi: libfc: fix null pointer dereference on a null lport

Wen Yang <[email protected]>
net: pasemi: fix an use-after-free in pasemi_mac_phy_init()

Xi Wang <[email protected]>
RDMA/hns: Fixs hw access invalid dma memory error

Arnd Bergmann <[email protected]>
devres: allow const resource arguments

David Howells <[email protected]>
rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()

Andy Shevchenko <[email protected]>
mfd: intel-lpss: Release IDA resources

Kevin Mitchell <[email protected]>
iommu/amd: Make iommu_disable safer

Nathan Huckleberry <[email protected]>
clk: qcom: Fix -Wunused-const-variable

Andy Shevchenko <[email protected]>
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"

Ravi Bangoria <[email protected]>
perf/ioctl: Add check for the sample_period value

Rob Clark <[email protected]>
drm/msm/a3xx: remove TPL1 regs from snapshot

Chen-Yu Tsai <[email protected]>
rtc: pcf8563: Clear event flags and disable interrupts before requesting irq

Peter Ujfalusi <[email protected]>
ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRs

Julian Wiedmann <[email protected]>
net/af_iucv: always register net_device notifier

Jakub Kicinski <[email protected]>
net: netem: fix backlog accounting for corrupted GSO frames

Jeffrey Hugo <[email protected]>
drm/msm/mdp5: Fix mdp5_cfg_init error return

Nathan Lynch <[email protected]>
powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild

Colin Ian King <[email protected]>
media: vivid: fix incorrect assignment operation when setting video mode

Eric Dumazet <[email protected]>
inet: frags: call inet_frags_fini() after unregister_pernet_subsys()

Eric W. Biederman <[email protected]>
signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

Lu Baolu <[email protected]>
iommu: Use right function to get group for device

Nathan Chancellor <[email protected]>
misc: sgi-xp: Properly initialize buf in xpc_get_rsvd_page_pa

Erwan Le Ray <[email protected]>
serial: stm32: fix transmit_chars when tx is stopped

Hook, Gary <[email protected]>
crypto: ccp - fix AES CFB error exposed by new test vectors

Christophe Leroy <[email protected]>
spi: spi-fsl-spi: call spi_finalize_current_message() at the end

Jon Hunter <[email protected]>
dmaengine: tegra210-adma: Fix crash during probe

Matthias Kaehlcke <[email protected]>
thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power

Brian Masney <[email protected]>
backlight: lm3630a: Return 0 on success in update_status functions

Dan Carpenter <[email protected]>
kdb: do a sanity check on the cpu in kdb_per_cpu()

Russell King <[email protected]>
ARM: riscpc: fix lack of keyboard interrupts after irq conversion

Bichao Zheng <[email protected]>
pwm: meson: Don't disable PWM when setting duty repeatedly

Florian Westphal <[email protected]>
netfilter: ebtables: CONFIG_COMPAT: reject trailing data after last rule

Dan Carpenter <[email protected]>
platform/x86: alienware-wmi: printing the wrong error code

Dan Carpenter <[email protected]>
media: davinci/vpbe: array underflow in vpbe_enum_outputs()

Dan Carpenter <[email protected]>
media: omap_vout: potential buffer overflow in vidioc_dqbuf()

YueHaibing <[email protected]>
l2tp: Fix possible NULL pointer dereference

Sameer Pujar <[email protected]>
dmaengine: tegra210-adma: restore channel status

Sameeh Jubran <[email protected]>
net: ena: fix ena_com_fill_hash_function() implementation

Sameeh Jubran <[email protected]>
net: ena: fix incorrect test of supported hash function

Sameeh Jubran <[email protected]>
net: ena: fix: Free napi resources when ena_up() fails

Sameeh Jubran <[email protected]>
net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry

Lu Baolu <[email protected]>
iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU

Jack Morgenstein <[email protected]>
IB/mlx5: Add missing XRC options to QP optional params mask

Arnd Bergmann <[email protected]>
usb: gadget: fsl: fix link error against usb-gadget module

Jerome Brunet <[email protected]>
ASoC: fix valid stream condition

Willem de Bruijn <[email protected]>
packet: in recvmsg msg_name return at least sizeof sockaddr_ll

Takashi Iwai <[email protected]>
ALSA: usb-audio: Handle the error from snd_usb_mixer_apply_create_quirk()

Alexandru Ardelean <[email protected]>
dmaengine: axi-dmac: Don't check the number of frames for alignment

Dan Carpenter <[email protected]>

    6lowpan: Off by one handling ->nexthdr

Akinobu Mita <[email protected]>
media: ov2659: fix unbalanced mutex_lock/unlock

Vladimir Oltean <[email protected]>
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect

Ben Hutchings <[email protected]>
powerpc: vdso: Make vdso32 installation conditional in vdso_install

Jie Liu <[email protected]>
tipc: set sysctl_tipc_rmem and named_timeout right range

Guenter Roeck <[email protected]>
hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

YueHaibing <[email protected]>
ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"

Bart Van Assche <[email protected]>
scsi: qla2xxx: Unregister chrdev if module initialization fails

YueHaibing <[email protected]>
ehea: Fix a copy-paste err in ehea_init_port_res

Martin Sperl <[email protected]>

    spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios

Dan Carpenter <[email protected]>
soc/fsl/qe: Fix an error code in qe_pin_request()

Sowjanya Komatineni <[email protected]>
spi: tegra114: fix for unpacked mode transfers

Sowjanya Komatineni <[email protected]>
spi: tegra114: clear packed bit for unpacked mode

YueHaibing <[email protected]>
media: tw5864: Fix possible NULL pointer dereference in tw5864_handle_frame

Arnd Bergmann <[email protected]>
media: davinci-isif: avoid uninitialized variable use

Tony Lindgren <[email protected]>
ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()

Finn Thain <[email protected]>
m68k: mac: Fix VIA timer counter accesses

Jon Maloy <[email protected]>
tipc: tipc clang warning

Arnd Bergmann <[email protected]>
jfs: fix bogus variable self-initialization

Axel Lin <[email protected]>

    regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB

Nicholas Mc Guire <[email protected]>
media: cx23885: check allocation return

Dan Carpenter <[email protected]>
media: wl128x: Fix an error code in fm_download_firmware()

Dan Carpenter <[email protected]>
media: cx18: update *pos correctly in cx18_read_pos()

Dan Carpenter <[email protected]>
media: ivtv: update *pos correctly in ivtv_read_pos()

Kangjie Lu <[email protected]>
net: sh_eth: fix a missing check of of_get_phy_mode

Dan Carpenter <[email protected]>
xen, cpu_hotplug: Prevent an out of bounds access

Dan Carpenter <[email protected]>
drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()

Steve Sistare <[email protected]>
scsi: megaraid_sas: reduce module load time

Guenter Roeck <[email protected]>
nios2: ksyms: Add missing symbol exports

Axel Lin <[email protected]>
regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uA

Vladimir Murzin <[email protected]>
ARM: 8848/1: virt: Align GIC version check with arm64 counterpart

Marek Szyprowski <[email protected]>
ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used

Stefan Wahren <[email protected]>
mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe

Marek Szyprowski <[email protected]>
clocksource/drivers/exynos_mct: Fix error path in timer resources initialization

Chen-Yu Tsai <[email protected]>
clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable

Trond Myklebust <[email protected]>
NFS: Fix a soft lockup in the delegation recovery code

Eric W. Biederman <[email protected]>
fs/nfs: Fix nfs_parse_devname to not modify it's argument

Takashi Iwai <[email protected]>
ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

Colin Ian King <[email protected]>
drm/nouveau/pmu: don't print reply values if exec is false

Colin Ian King <[email protected]>
drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON

Vinod Koul <[email protected]>
net: dsa: qca8k: Enable delay for RGMII_ID mode

Axel Lin <[email protected]>
regulator: pv88090: Fix array out-of-bounds access

Axel Lin <[email protected]>
regulator: pv88080: Fix array out-of-bounds access

Axel Lin <[email protected]>
regulator: pv88060: Fix array out-of-bounds access

YueHaibing <[email protected]>
cdc-wdm: pass return value of recover_from_urb_loss

Robin Murphy <[email protected]>
dmaengine: mv_xor: Use correct device for DMA API

Eric Auger <[email protected]>
vfio_pci: Enable memory accesses before calling pci_map_rom

David Howells <[email protected]>
keys: Timestamp new keys

Ming Lei <[email protected]>

    block: don't use bio->bi_vcnt to figure out segment number

Sven Van Asbroeck <[email protected]>
usb: phy: twl6030-usb: fix possible use-after-free on remove

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups

Geert Uytterhoeven <[email protected]>

    pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: emev2: Add missing pinmux functions

Steve Wise <[email protected]>
iw_cxgb4: use tos when finding ipv6 routes

Steve Wise <[email protected]>
iw_cxgb4: use tos when importing the endpoint

YueHaibing <[email protected]>
fbdev: chipsfb: remove set but not used variable 'size'

Colin Ian King <[email protected]>
rtc: pm8xxx: fix unintended sign extension

Colin Ian King <[email protected]>

    rtc: 88pm80x: fix unintended sign extension

Colin Ian King <[email protected]>

    rtc: 88pm860x: fix unintended sign extension

Moritz Fischer <[email protected]>
net: phy: fixed_phy: Fix fixed_phy not checking GPIO

Michael Kao <[email protected]>
thermal: mediatek: fix register index error

Colin Ian King <[email protected]>
rtc: ds1672: fix unintended sign extension

Colin Ian King <[email protected]>
staging: most: cdev: add missing check for cdev_add failure

Sara Sharon <[email protected]>
iwlwifi: mvm: fix RSS config command

Vladimir Zapolskiy <[email protected]>
ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage

Vladimir Zapolskiy <[email protected]>
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property

Vladimir Zapolskiy <[email protected]>
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant

Vladimir Zapolskiy <[email protected]>
ARM: dts: lpc32xx: reparent keypad controller to SIC1

Vladimir Zapolskiy <[email protected]>
ARM: dts: lpc32xx: add required clocks property to keypad device node

Corentin Labbe <[email protected]>
crypto: crypto4xx - Fix wrong ppc4xx_trng_probe()/ppc4xx_trng_remove() arguments

YueHaibing <[email protected]>
tty: ipwireless: Fix potential NULL pointer dereference

Johannes Berg <[email protected]>
iwlwifi: mvm: fix A-MPDU reference assignment

Chen-Yu Tsai <[email protected]>
clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it

Eric Wong <[email protected]>
rtc: cmos: ignore bogus century byte

Israel Rukshin <[email protected]>
IB/iser: Pass the correct number of entries for dma mapped SGL

Stefan Agner <[email protected]>
ASoC: imx-sgtl5000: put of nodes if finding codec fails

Eric Biggers <[email protected]>
crypto: tgr192 - fix unaligned memory access

Pawe? Chmiel <[email protected]>
media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

Dan Carpenter <[email protected]>
drm/etnaviv: NULL vs IS_ERR() buf in etnaviv_core_dump()

Loic Poulain <[email protected]>
arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD

Gal Pressman <[email protected]>
RDMA/qedr: Fix out of bounds index check in query pkey

Gal Pressman <[email protected]>
RDMA/ocrdma: Fix out of bounds index check in query pkey

Gal Pressman <[email protected]>
IB/usnic: Fix out of bounds index check in query pkey

Yangtao Li <[email protected]>
clk: dove: fix refcount leak in dove_clk_init()

Yangtao Li <[email protected]>
clk: armada-xp: fix refcount leak in axp_clk_init()

Yangtao Li <[email protected]>
clk: kirkwood: fix refcount leak in kirkwood_clk_init()

Yangtao Li <[email protected]>
clk: armada-370: fix refcount leak in a370_clk_init()

Yangtao Li <[email protected]>
clk: vf610: fix refcount leak in vf610_clocks_init()

Yangtao Li <[email protected]>
clk: imx7d: fix refcount leak in imx7d_clocks_init()

Yangtao Li <[email protected]>
clk: imx6sx: fix refcount leak in imx6sx_clocks_init()

Yangtao Li <[email protected]>
clk: imx6q: fix refcount leak in imx6q_clocks_init()

Yangtao Li <[email protected]>
clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()

Yangtao Li <[email protected]>
clk: socfpga: fix refcount leak

Yangtao Li <[email protected]>
clk: qoriq: fix refcount leak in clockgen_init()

Yangtao Li <[email protected]>
clk: highbank: fix refcount leak in hb_clk_init()

Dan Carpenter <[email protected]>
Input: nomadik-ske-keypad - fix a loop timeout test

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh7734: Add missing IPSR11 field

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group

Yoshihiro Shimoda <[email protected]>
net: phy: Fix not to call phy_resume() if PHY is not attached

Lyude Paul <[email protected]>
drm/dp_mst: Skip validating ports during destruction, just ref

YueHaibing <[email protected]>
exportfs: fix 'passing zero to ERR_PTR()' warning

Colin Ian King <[email protected]>
pcrypt: use format specifier in kobject_add

Petr Machata <[email protected]>
mlxsw: reg: QEEC: Add minimum shaper fields

Hans de Goede <[email protected]>
pwm: lpss: Release runtime-pm reference from the driver's remove callback

Spencer E. Olson <[email protected]>
staging: comedi: ni_mio_common: protect register write overflow

Nicolas Huaman <[email protected]>
ALSA: usb-audio: update quirk for B&W PX to remove microphone

Zhu Yanjun <[email protected]>
IB/rxe: replace kvfree with vfree

Anders Roxell <[email protected]>
ALSA: hda: fix unused variable warning

Dan Carpenter <[email protected]>
drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()

Peter Rosin <[email protected]>
drm/sti: do not remove the drm_bridge that was never added

Lorenzo Bianconi <[email protected]>
mt7601u: fix bbp version check in mt7601u_wait_bbp_ready

Ard Biesheuvel <[email protected]>
powerpc/archrandom: fix arch_get_random_seed_int()

Jan Kara <[email protected]>
xfs: Sanity check flags of Q_XQUOTARM call

-------------

Diffstat:

 Documentation/kernel-parameters.txt                |   6 ++
 Makefile                                           |   4 +-
 arch/arm/boot/dts/lpc3250-phy3250.dts              |   4 +-
 arch/arm/boot/dts/lpc32xx.dtsi                     |  10 +-
 arch/arm/boot/dts/ls1021a-twr.dts                  |   9 +-
 arch/arm/boot/dts/ls1021a.dtsi                     |  11 +-
 arch/arm/common/mcpm_entry.c                       |   2 +-
 arch/arm/include/asm/suspend.h                     |   1 +
 arch/arm/kernel/hyp-stub.S                         |   4 +-
 arch/arm/kernel/sleep.S                            |  12 +++
 arch/arm/mach-omap2/omap_hwmod.c                   |   2 +-
 arch/arm/mach-rpc/irq.c                            |   3 +-
 arch/arm/plat-pxa/ssp.c                            |   6 --
 arch/arm64/boot/dts/arm/juno-clocks.dtsi           |   4 +-
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          |   2 +
 arch/arm64/kernel/cpufeature.c                     |   5 +
 arch/m68k/amiga/cia.c                              |   9 ++
 arch/m68k/atari/ataints.c                          |   4 +-
 arch/m68k/atari/time.c                             |  15 ++-
 arch/m68k/bvme6000/config.c                        |  20 ++--
 arch/m68k/hp300/time.c                             |  10 +-
 arch/m68k/mac/via.c                                | 119 ++++++++++++---------
 arch/m68k/mvme147/config.c                         |  18 ++--
 arch/m68k/mvme16x/config.c                         |  21 ++--
 arch/m68k/q40/q40ints.c                            |  19 ++--
 arch/m68k/sun3/sun3ints.c                          |   3 +
 arch/m68k/sun3x/time.c                             |  16 +--
 arch/mips/include/asm/io.h                         |  14 +--
 arch/mips/kernel/setup.c                           |   2 +-
 arch/nios2/kernel/nios2_ksyms.c                    |  12 +++
 arch/powerpc/Makefile                              |   2 +
 arch/powerpc/include/asm/archrandom.h              |   2 +-
 arch/powerpc/kernel/cacheinfo.c                    |  21 ++++
 arch/powerpc/kernel/cacheinfo.h                    |   4 +
 arch/x86/Kconfig.debug                             |   2 +-
 arch/x86/kernel/kgdb.c                             |   2 +-
 block/blk-merge.c                                  |   8 +-
 crypto/pcrypt.c                                    |   2 +-
 crypto/tgr192.c                                    |   6 +-
 drivers/ata/libahci.c                              |   1 -
 drivers/atm/firestream.c                           |   3 +
 drivers/bcma/driver_pci.c                          |   4 +-
 drivers/block/drbd/drbd_main.c                     |   2 +
 drivers/clk/clk-highbank.c                         |   1 +
 drivers/clk/clk-qoriq.c                            |   1 +
 drivers/clk/imx/clk-imx6q.c                        |   1 +
 drivers/clk/imx/clk-imx6sx.c                       |   1 +
 drivers/clk/imx/clk-imx7d.c                        |   1 +
 drivers/clk/imx/clk-vf610.c                        |   1 +
 drivers/clk/mvebu/armada-370.c                     |   4 +-
 drivers/clk/mvebu/armada-xp.c                      |   4 +-
 drivers/clk/mvebu/dove.c                           |   8 +-
 drivers/clk/mvebu/kirkwood.c                       |   2 +
 drivers/clk/qcom/gcc-msm8996.c                     |  36 -------
 drivers/clk/samsung/clk-exynos4.c                  |   1 +
 drivers/clk/socfpga/clk-pll-a10.c                  |   1 +
 drivers/clk/socfpga/clk-pll.c                      |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c               |   2 +-
 drivers/clocksource/exynos_mct.c                   |  14 ++-
 drivers/clocksource/timer-sun5i.c                  |  10 ++
 drivers/crypto/amcc/crypto4xx_trng.h               |   4 +-
 drivers/crypto/caam/caamrng.c                      |   5 +-
 drivers/crypto/ccp/ccp-crypto-aes.c                |   8 +-
 drivers/dma/dma-axi-dmac.c                         |   2 +-
 drivers/dma/dw/platform.c                          |  14 ++-
 drivers/dma/edma.c                                 |   6 +-
 drivers/dma/hsu/hsu.c                              |   4 +-
 drivers/dma/imx-sdma.c                             |   8 ++
 drivers/dma/mv_xor.c                               |   2 +-
 drivers/dma/tegra210-adma.c                        |  72 ++++++++++---
 drivers/gpu/drm/drm_dp_mst_topology.c              |  15 ++-
 drivers/gpu/drm/etnaviv/etnaviv_dump.c             |   2 +-
 drivers/gpu/drm/msm/adreno/a3xx_gpu.c              |  24 ++---
 drivers/gpu/drm/msm/dsi/dsi_host.c                 |   6 +-
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c            |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/gddr3.c     |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/memx.c     |   4 +-
 drivers/gpu/drm/radeon/cik.c                       |   4 +-
 drivers/gpu/drm/radeon/r600.c                      |   4 +-
 drivers/gpu/drm/radeon/si.c                        |   4 +-
 drivers/gpu/drm/sti/sti_hda.c                      |   1 -
 drivers/gpu/drm/sti/sti_hdmi.c                     |   1 -
 drivers/gpu/drm/virtio/virtgpu_vq.c                |   5 +-
 drivers/hwmon/adt7475.c                            |   5 +-
 drivers/hwmon/hwmon.c                              |  98 +++++++++++------
 drivers/hwmon/lm75.c                               |   2 +-
 drivers/hwmon/nct7802.c                            |   4 +-
 drivers/hwmon/shtc1.c                              |   2 +-
 drivers/hwmon/w83627hf.c                           |  42 +++++++-
 drivers/hwtracing/coresight/coresight-etb10.c      |   4 +-
 drivers/hwtracing/coresight/coresight-tmc-etf.c    |   4 +-
 drivers/iio/dac/ad5380.c                           |   2 +-
 drivers/infiniband/hw/cxgb4/cm.c                   |   7 +-
 drivers/infiniband/hw/hns/hns_roce_qp.c            |   1 -
 drivers/infiniband/hw/mlx5/qp.c                    |  21 ++++
 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c        |   2 +-
 drivers/infiniband/hw/qedr/verbs.c                 |   2 +-
 drivers/infiniband/hw/usnic/usnic_ib_verbs.c       |   2 +-
 drivers/infiniband/sw/rxe/rxe_cq.c                 |   4 +-
 drivers/infiniband/sw/rxe/rxe_qp.c                 |   5 +-
 drivers/infiniband/ulp/iser/iscsi_iser.h           |   2 +-
 drivers/infiniband/ulp/iser/iser_memory.c          |  10 +-
 drivers/infiniband/ulp/isert/ib_isert.c            |  12 ---
 drivers/input/keyboard/nomadik-ske-keypad.c        |   2 +-
 drivers/input/misc/keyspan_remote.c                |   9 +-
 drivers/input/tablet/aiptek.c                      |   6 +-
 drivers/input/tablet/gtco.c                        |  10 +-
 drivers/input/tablet/pegasus_notetaker.c           |   2 +-
 drivers/input/touchscreen/sun4i-ts.c               |   6 +-
 drivers/input/touchscreen/sur40.c                  |   2 +-
 drivers/iommu/amd_iommu.c                          |   2 +
 drivers/iommu/amd_iommu_init.c                     |   3 +
 drivers/iommu/intel-iommu.c                        |   5 +-
 drivers/iommu/iommu.c                              |   6 +-
 drivers/md/bcache/super.c                          |   3 -
 drivers/md/bitmap.c                                |   8 +-
 drivers/media/i2c/ov2659.c                         |   2 +-
 drivers/media/i2c/soc_camera/ov6650.c              |  72 ++++++++-----
 drivers/media/pci/cx18/cx18-fileops.c              |   2 +-
 drivers/media/pci/cx23885/cx23885-dvb.c            |   5 +-
 drivers/media/pci/ivtv/ivtv-fileops.c              |   2 +-
 drivers/media/pci/tw5864/tw5864-video.c            |   4 +-
 drivers/media/platform/davinci/isif.c              |   9 --
 drivers/media/platform/davinci/vpbe.c              |   2 +-
 drivers/media/platform/omap/omap_vout.c            |  15 ++-
 drivers/media/platform/s5p-jpeg/jpeg-core.c        |   2 +-
 drivers/media/platform/vivid/vivid-osd.c           |   2 +-
 drivers/media/radio/wl128x/fmdrv_common.c          |   5 +-
 drivers/mfd/intel-lpss.c                           |   1 +
 drivers/misc/mic/card/mic_x100.c                   |  28 +++--
 drivers/misc/sgi-xp/xpc_partition.c                |   2 +-
 drivers/mmc/host/sdhci-brcmstb.c                   |   4 +-
 drivers/mmc/host/sdhci-tegra.c                     |   2 +-
 drivers/mmc/host/sdhci.c                           |  10 +-
 drivers/net/can/slcan.c                            |  12 ++-
 drivers/net/dsa/qca8k.c                            |  12 +++
 drivers/net/dsa/qca8k.h                            |   1 +
 drivers/net/ethernet/amazon/ena/ena_com.c          |   3 +-
 drivers/net/ethernet/amazon/ena/ena_ethtool.c      |   4 +-
 drivers/net/ethernet/amazon/ena/ena_netdev.c       |   1 +
 drivers/net/ethernet/broadcom/bcmsysport.c         |   2 +-
 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c    |   2 +
 drivers/net/ethernet/hisilicon/hix5hd2_gmac.c      |   2 +-
 drivers/net/ethernet/ibm/ehea/ehea_main.c          |   2 +-
 drivers/net/ethernet/mellanox/mlxsw/reg.h          |  22 +++-
 drivers/net/ethernet/natsemi/sonic.c               |   6 +-
 drivers/net/ethernet/pasemi/pasemi_mac.c           |   2 +-
 drivers/net/ethernet/qlogic/qed/qed_l2.c           |  34 +++---
 drivers/net/ethernet/qualcomm/qca_spi.c            |   9 +-
 drivers/net/ethernet/qualcomm/qca_spi.h            |   1 +
 drivers/net/ethernet/renesas/sh_eth.c              |   6 +-
 .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c    |   2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c   |   2 +-
 drivers/net/gtp.c                                  |   4 +-
 drivers/net/phy/fixed_phy.c                        |   6 +-
 drivers/net/phy/phy.c                              |   3 +-
 drivers/net/phy/phy_device.c                       |  11 +-
 drivers/net/slip/slip.c                            |  12 ++-
 drivers/net/usb/lan78xx.c                          |  15 +++
 drivers/net/wireless/ath/ath9k/dynack.c            |   8 +-
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c        |  12 +--
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c      |   2 +-
 drivers/net/wireless/marvell/libertas/cfg.c        |  16 ++-
 drivers/net/wireless/marvell/libertas_tf/cmd.c     |   2 +-
 drivers/net/wireless/mediatek/mt7601u/phy.c        |   2 +-
 drivers/nvme/host/pci.c                            |   2 +-
 drivers/of/of_mdio.c                               |   2 +-
 drivers/pinctrl/sh-pfc/pfc-emev2.c                 |  20 ++++
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c               |   3 +-
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c               |   8 +-
 drivers/pinctrl/sh-pfc/pfc-r8a7792.c               |   1 +
 drivers/pinctrl/sh-pfc/pfc-r8a7794.c               |   2 +-
 drivers/pinctrl/sh-pfc/pfc-sh7269.c                |   2 +-
 drivers/pinctrl/sh-pfc/pfc-sh73a0.c                |   4 +-
 drivers/pinctrl/sh-pfc/pfc-sh7734.c                |   4 +-
 drivers/platform/mips/cpu_hwmon.c                  |   2 +-
 drivers/platform/x86/alienware-wmi.c               |   2 +-
 drivers/power/supply/power_supply_core.c           |  10 +-
 drivers/pwm/pwm-lpss.c                             |   6 ++
 drivers/pwm/pwm-meson.c                            |   5 -
 drivers/rapidio/rio_cm.c                           |   4 +-
 drivers/regulator/pv88060-regulator.c              |   2 +-
 drivers/regulator/pv88080-regulator.c              |   2 +-
 drivers/regulator/pv88090-regulator.c              |   2 +-
 drivers/regulator/tps65086-regulator.c             |   4 +-
 drivers/regulator/wm831x-dcdc.c                    |   4 +-
 drivers/rtc/rtc-88pm80x.c                          |  21 ++--
 drivers/rtc/rtc-88pm860x.c                         |  21 ++--
 drivers/rtc/rtc-ds1672.c                           |   3 +-
 drivers/rtc/rtc-mc146818-lib.c                     |   2 +-
 drivers/rtc/rtc-pcf8563.c                          |  11 +-
 drivers/rtc/rtc-pm8xxx.c                           |   6 +-
 drivers/scsi/libfc/fc_exch.c                       |   2 +-
 drivers/scsi/megaraid/megaraid_sas_base.c          |   4 +-
 drivers/scsi/qla2xxx/qla_os.c                      |  34 +++---
 drivers/scsi/scsi_transport_iscsi.c                |   7 ++
 drivers/soc/fsl/qe/gpio.c                          |   4 +-
 drivers/spi/spi-bcm2835aux.c                       |  13 ++-
 drivers/spi/spi-fsl-spi.c                          |   2 +-
 drivers/spi/spi-tegra114.c                         |  45 ++++++--
 drivers/staging/comedi/drivers/ni_mio_common.c     |  24 +++--
 drivers/staging/greybus/light.c                    |  12 +--
 drivers/staging/most/aim-cdev/cdev.c               |   5 +-
 drivers/target/iscsi/iscsi_target.c                |   6 +-
 drivers/thermal/cpu_cooling.c                      |   2 +-
 drivers/thermal/mtk_thermal.c                      |   6 +-
 drivers/tty/ipwireless/hardware.c                  |   2 +
 drivers/tty/serial/stm32-usart.c                   |  11 +-
 drivers/usb/class/cdc-wdm.c                        |   2 +-
 drivers/usb/host/xhci-hub.c                        |   2 +-
 drivers/usb/phy/Kconfig                            |   2 +-
 drivers/usb/phy/phy-twl6030-usb.c                  |   2 +-
 drivers/vfio/pci/vfio_pci.c                        |  19 +++-
 drivers/video/backlight/lm3630a_bl.c               |   4 +-
 drivers/video/fbdev/chipsfb.c                      |   3 +-
 drivers/xen/cpu_hotplug.c                          |   2 +-
 fs/afs/super.c                                     |   1 +
 fs/btrfs/inode-map.c                               |   1 +
 fs/cifs/connect.c                                  |   3 +-
 fs/exportfs/expfs.c                                |   1 +
 fs/ext4/inline.c                                   |   2 +-
 fs/jfs/jfs_txnmgr.c                                |   3 +-
 fs/namei.c                                         |  17 +--
 fs/nfs/delegation.c                                |  20 ++--
 fs/nfs/delegation.h                                |   1 +
 fs/nfs/super.c                                     |   2 +-
 fs/xfs/xfs_quotaops.c                              |   3 +
 include/linux/bitmap.h                             |   8 ++
 include/linux/device.h                             |   3 +-
 include/linux/mlx5/mlx5_ifc.h                      |   2 -
 include/linux/netfilter/ipset/ip_set.h             |   7 --
 include/linux/platform_data/dma-imx-sdma.h         |   3 +
 include/linux/signal.h                             |  15 ++-
 include/media/davinci/vpbe.h                       |   2 +-
 include/trace/events/xen.h                         |   6 +-
 include/uapi/linux/ethtool.h                       |   6 +-
 kernel/debug/kdb/kdb_main.c                        |   2 +-
 kernel/events/core.c                               |   3 +
 kernel/signal.c                                    |   5 +
 lib/bitmap.c                                       |  20 ++++
 lib/devres.c                                       |   3 +-
 lib/kfifo.c                                        |   3 +-
 net/6lowpan/nhc.c                                  |   2 +-
 net/bridge/netfilter/ebtables.c                    |   4 +-
 net/core/ethtool.c                                 |   2 +
 net/core/neighbour.c                               |   4 +-
 net/ieee802154/6lowpan/reassembly.c                |   2 +-
 net/ipv4/ip_tunnel.c                               |   4 +-
 net/ipv4/tcp_bbr.c                                 |   3 +-
 net/ipv6/ip6_tunnel.c                              |   4 +-
 net/ipv6/reassembly.c                              |   2 +-
 net/iucv/af_iucv.c                                 |  27 +++--
 net/l2tp/l2tp_core.c                               |   3 +-
 net/llc/af_llc.c                                   |  34 +++---
 net/llc/llc_conn.c                                 |  35 ++----
 net/llc/llc_if.c                                   |  12 ++-
 net/mac80211/rc80211_minstrel_ht.c                 |   2 +-
 net/mac80211/rx.c                                  |  11 +-
 net/netfilter/ipset/ip_set_bitmap_gen.h            |   2 +-
 net/netfilter/ipset/ip_set_bitmap_ip.c             |   6 +-
 net/netfilter/ipset/ip_set_bitmap_ipmac.c          |   6 +-
 net/netfilter/ipset/ip_set_bitmap_port.c           |   6 +-
 net/packet/af_packet.c                             |  25 ++++-
 net/rds/ib_stats.c                                 |   2 +-
 net/rxrpc/output.c                                 |   3 +
 net/sched/act_mirred.c                             |   6 +-
 net/sched/ematch.c                                 |   2 +-
 net/sched/sch_netem.c                              |  18 +++-
 net/tipc/node.c                                    |   7 +-
 net/tipc/sysctl.c                                  |   8 +-
 net/x25/af_x25.c                                   |   6 +-
 scripts/recordmcount.c                             |  17 +++
 security/keys/key.c                                |   1 +
 sound/aoa/codecs/onyx.c                            |   4 +-
 sound/pci/hda/hda_controller.h                     |   9 +-
 sound/soc/codecs/cs4349.c                          |   1 +
 sound/soc/codecs/es8328.c                          |   2 +-
 sound/soc/codecs/wm8737.c                          |   2 +-
 sound/soc/davinci/davinci-mcasp.c                  |  13 ++-
 sound/soc/fsl/imx-sgtl5000.c                       |   3 +-
 sound/soc/qcom/apq8016_sbc.c                       |  21 +++-
 sound/soc/soc-pcm.c                                |   4 +-
 sound/soc/sunxi/sun4i-i2s.c                        |   4 +-
 sound/usb/mixer.c                                  |   4 +-
 sound/usb/quirks-table.h                           |   9 +-
 287 files changed, 1451 insertions(+), 803 deletions(-)
author maintainer
#1 lore raw

PATCH 1/271 xfs: Sanity check flags of Q_XQUOTARM call

From: Jan Kara <[email protected]>

commit 3dd4d40b420846dd35869ccc8f8627feef2cff32 upstream.

Flags passed to Q_XQUOTARM were not sanity checked for invalid values. Fix that.

---
 fs/xfs/xfs_quotaops.c |    3 +++
 1 file changed, 3 insertions(+)
fs/xfs/xfs_quotaops.c +3 -0
@@ -214,6 +214,9 @@ xfs_fs_rm_xquota(
 	if (XFS_IS_QUOTA_ON(mp))
 		return -EINVAL;
 
+	if (uflags & ~(FS_USER_QUOTA | FS_GROUP_QUOTA | FS_PROJ_QUOTA))
+		return -EINVAL;
+
 	if (uflags & FS_USER_QUOTA)
 		flags |= XFS_DQ_USER;
 	if (uflags & FS_GROUP_QUOTA)
author maintainer
#2 lore raw

PATCH 2/271 powerpc/archrandom: fix arch_get_random_seed_int()

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

commit b6afd1234cf93aa0d71b4be4788c47534905f0be upstream.

Commit 01c9348c7620ec65

powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*

updated arch_get_random_[int|long]() to be NOPs, and moved the hardware RNG backing to arch_get_random_seed_[int|long]() instead. However, it failed to take into account that arch_get_random_int() was implemented in terms of arch_get_random_long(), and so we ended up with a version of the former that is essentially a NOP as well.

Fix this by calling arch_get_random_seed_long() from arch_get_random_seed_int() instead.

Fixes 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*")
---
 arch/powerpc/include/asm/archrandom.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/include/asm/archrandom.h +1 -1
@@ -27,7 +27,7 @@ static inline int arch_get_random_seed_i
 	unsigned long val;
 	int rc;
 
-	rc = arch_get_random_long(&val);
+	rc = arch_get_random_seed_long(&val);
 	if (rc)
 		*v = val;
 
author maintainer
#3 lore raw

PATCH 3/271 mt7601u: fix bbp version check in mt7601u_wait_bbp_ready

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 upstream.

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by coverity with the following error:

Logical vs. bitwise operator
The expression's value does not depend on the operands; inadvertent use of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator")

---
 drivers/net/wireless/mediatek/mt7601u/phy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt7601u/phy.c +1 -1
@@ -221,7 +221,7 @@ int mt7601u_wait_bbp_ready(struct mt7601
 
 	do {
 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
-		if (val && ~val)
+		if (val && val != 0xff)
 			break;
 	} while (--i);
 
author maintainer
#4 lore raw

PATCH 4/271 drm/sti: do not remove the drm_bridge that was never added

In reply to Greg Kroah-Hartman

From: Peter Rosin <[email protected]>

[ Upstream commit 66e31a72dc38543b2d9d1ce267dc78ba9beebcfd ]

Removing the drm_bridge_remove call should avoid a NULL dereference during list processing in drm_bridge_remove if the error path is ever taken.

The more natural approach would perhaps be to add a drm_bridge_add, but there are several other bridges that never call drm_bridge_add. Just removing the drm_bridge_remove is the easier fix.

---
 drivers/gpu/drm/sti/sti_hda.c  | 1 -
 drivers/gpu/drm/sti/sti_hdmi.c | 1 -
 2 files changed, 2 deletions(-)
drivers/gpu/drm/sti/sti_hda.c +0 -1
index e7c243f708702..08808e3701de9 100644
@@ -740,7 +740,6 @@ static int sti_hda_bind(struct device *dev, struct device *master, void *data)
 	return 0;
 
 err_sysfs:
-	drm_bridge_remove(bridge);
 	return -EINVAL;
 }
 
drivers/gpu/drm/sti/sti_hdmi.c +0 -1
index 376b0763c874a..a5412a6fbeca2 100644
@@ -1352,7 +1352,6 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
 	return 0;
 
 err_sysfs:
-	drm_bridge_remove(bridge);
 	hdmi->drm_connector = NULL;
 	return -EINVAL;
 }
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/271 drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 09c4b49457434fa74749ad6194ef28464d9f5df9 ]

This doesn't affect runtime because in the current code "idx" is always valid.

First, we read from "vgdev->capsets[idx].max_size" before checking whether "idx" is within bounds. And secondly the bounds check is off by one so we could end up reading one element beyond the end of the vgdev->capsets[] array.

---
 drivers/gpu/drm/virtio/virtgpu_vq.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/virtio/virtgpu_vq.c +3 -2
index a1b3ea1ccb65b..772a5a3b0ce1a 100644
@@ -681,11 +681,11 @@ int virtio_gpu_cmd_get_capset(struct virtio_gpu_device *vgdev,
 {
 	struct virtio_gpu_get_capset *cmd_p;
 	struct virtio_gpu_vbuffer *vbuf;
-	int max_size = vgdev->capsets[idx].max_size;
+	int max_size;
 	struct virtio_gpu_drv_cap_cache *cache_ent;
 	void *resp_buf;
 
-	if (idx > vgdev->num_capsets)
+	if (idx >= vgdev->num_capsets)
 		return -EINVAL;
 
 	if (version > vgdev->capsets[idx].max_version)
@@ -695,6 +695,7 @@ int virtio_gpu_cmd_get_capset(struct virtio_gpu_device *vgdev,
 	if (!cache_ent)
 		return -ENOMEM;
 
+	max_size = vgdev->capsets[idx].max_size;
 	cache_ent->caps_cache = kmalloc(max_size, GFP_KERNEL);
 	if (!cache_ent->caps_cache) {
 		kfree(cache_ent);
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/271 ALSA: hda: fix unused variable warning

In reply to Greg Kroah-Hartman

From: Anders Roxell <[email protected]>

[ Upstream commit 5b03006d5c58ddd31caf542eef4d0269bcf265b3 ]

When CONFIG_X86=n function azx_snoop doesn't use the variable chip it only returns true.

sound/pci/hda/hda_intel.c: In function ‘dma_alloc_pages’:
sound/pci/hda/hda_intel.c:2002:14: warning: unused variable ‘chip’ [-Wunused-variable]

  struct azx *chip = bus_to_azx(bus);
              ^~~~

Create a inline function of azx_snoop.

Fixes a41d122449be ("ALSA: hda - Embed bus into controller object")
---
 sound/pci/hda/hda_controller.h | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
sound/pci/hda/hda_controller.h +4 -5
index b83feecf1e40c..8f93869982703 100644
@@ -171,11 +171,10 @@ struct azx {
 #define azx_bus(chip)	(&(chip)->bus.core)
 #define bus_to_azx(_bus)	container_of(_bus, struct azx, bus.core)
 
-#ifdef CONFIG_X86
-#define azx_snoop(chip)		((chip)->snoop)
-#else
-#define azx_snoop(chip)		true
-#endif
+static inline bool azx_snoop(struct azx *chip)
+{
+	return !IS_ENABLED(CONFIG_X86) || chip->snoop;
+}
 
 /*
  * macros for easy use
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/271 IB/rxe: replace kvfree with vfree

In reply to Greg Kroah-Hartman

From: Zhu Yanjun <[email protected]>

[ Upstream commit 721ad7e643f7002efa398838693f90284ea216d1 ]

The buf is allocated by vmalloc_user in the function rxe_queue_init. So it is better to free it by vfree.

Fixes 8700e3e7c485 ("Soft RoCE driver")
---
 drivers/infiniband/sw/rxe/rxe_cq.c | 4 ++--
 drivers/infiniband/sw/rxe/rxe_qp.c | 5 +++--
 2 files changed, 5 insertions(+), 4 deletions(-)
drivers/infiniband/sw/rxe/rxe_cq.c +2 -2
index e5e6a5e7dee9c..5ac88412f1ffe 100644
@@ -30,7 +30,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
-
+#include <linux/vmalloc.h>
 #include "rxe.h"
 #include "rxe_loc.h"
 #include "rxe_queue.h"
@@ -89,7 +89,7 @@ int rxe_cq_from_init(struct rxe_dev *rxe, struct rxe_cq *cq, int cqe,
 	err = do_mmap_info(rxe, udata, false, context, cq->queue->buf,
 			   cq->queue->buf_size, &cq->queue->ip);
 	if (err) {
-		kvfree(cq->queue->buf);
+		vfree(cq->queue->buf);
 		kfree(cq->queue);
 		return err;
 	}
drivers/infiniband/sw/rxe/rxe_qp.c +3 -2
index 44b2108253bd9..d6672127808b7 100644
@@ -34,6 +34,7 @@
 #include <linux/skbuff.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rxe.h"
 #include "rxe_loc.h"
@@ -255,7 +256,7 @@ static int rxe_qp_init_req(struct rxe_dev *rxe, struct rxe_qp *qp,
 			   qp->sq.queue->buf_size, &qp->sq.queue->ip);
 
 	if (err) {
-		kvfree(qp->sq.queue->buf);
+		vfree(qp->sq.queue->buf);
 		kfree(qp->sq.queue);
 		return err;
 	}
@@ -312,7 +313,7 @@ static int rxe_qp_init_resp(struct rxe_dev *rxe, struct rxe_qp *qp,
 				   qp->rq.queue->buf_size,
 				   &qp->rq.queue->ip);
 		if (err) {
-			kvfree(qp->rq.queue->buf);
+			vfree(qp->rq.queue->buf);
 			kfree(qp->rq.queue);
 			return err;
 		}
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 8/271 ALSA: usb-audio: update quirk for B&W PX to remove microphone

In reply to Greg Kroah-Hartman

From: Nicolas Huaman <[email protected]>

[ Upstream commit c369c8db15d51fa175d2ba85928f79d16af6b562 ]

A quirk in snd-usb-audio was added to automate setting sample rate to 4800k and remove the previously exposed nonfunctional microphone for the Bowers & Wilkins PX:
commit 240a8af929c7c57dcde28682725b29cf8474e8e5
https://lore.kernel.org/patchwork/patch/919689/

However the headphones where updated shortly after that to remove the unintentional microphone functionality. I guess because of this the headphones now crash when connecting them via USB while the quirk is active. Dmesg:

snd-usb-audio: probe of 2-3:1.0 failed with error -22 usb 2-3: 2:1: cannot get min/max values for control 2 (id 2)

This patch removes the microfone and allows the headphones to connect and work out of the box. It is based on the current mainline kernel
and successfully applied an tested on my machine (4.18.10.arch1-1).

Fixes 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones")
---
 sound/usb/quirks-table.h | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
sound/usb/quirks-table.h +2 -7
index d32727c74a168..c892b4d1e733f 100644
@@ -3293,19 +3293,14 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 				.ifnum = 0,
 				.type = QUIRK_AUDIO_STANDARD_MIXER,
 			},
-			/* Capture */
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
 			/* Playback */
 			{
-				.ifnum = 2,
+				.ifnum = 1,
 				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
 				.data = &(const struct audioformat) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
-					.iface = 2,
+					.iface = 1,
 					.altsetting = 1,
 					.altset_idx = 1,
 					.attributes = UAC_EP_CS_ATTR_FILL_MAX |
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/271 staging: comedi: ni_mio_common: protect register write overflow

In reply to Greg Kroah-Hartman

From: Spencer E. Olson <[email protected]>

[ Upstream commit 1cbca5852d6c16e85a21487a15d211195aacd4a1 ]

Fixes two problems introduced as early as
commit 03aef4b6dc12 ("Staging: comedi: add ni_mio_common code"):
(1) Ensures that the last four bits of NISTC_RTSI_TRIGB_OUT_REG register is not unduly overwritten on e-series devices. On e-series devices, the first three of the last four bits are reserved. The last bit defines the output selection of the RGOUT0 pin, otherwise known as RTSI_Sub_Selection. For m-series devices, these last four bits are indeed used as the output selection of the RTSI7 pin (and the RTSI_Sub_Selection bit for the RGOUT0 pin is moved to the RTSI_Trig_Direction register.
(2) Allows all 4 RTSI_BRD lines to be treated as valid sources for RTSI lines.

This patch also cleans up the ni_get_rtsi_routing command for readability.

Fixes 03aef4b6dc12 ("Staging: comedi: add ni_mio_common code")
---
 .../staging/comedi/drivers/ni_mio_common.c    | 24 +++++++++++++------
 1 file changed, 17 insertions(+), 7 deletions(-)
drivers/staging/comedi/drivers/ni_mio_common.c +17 -7
index fe03a41dc5cf5..12056eb3cbe81 100644
@@ -4945,7 +4945,10 @@ static int ni_valid_rtsi_output_source(struct comedi_device *dev,
 	case NI_RTSI_OUTPUT_G_SRC0:
 	case NI_RTSI_OUTPUT_G_GATE0:
 	case NI_RTSI_OUTPUT_RGOUT0:
-	case NI_RTSI_OUTPUT_RTSI_BRD_0:
+	case NI_RTSI_OUTPUT_RTSI_BRD(0):
+	case NI_RTSI_OUTPUT_RTSI_BRD(1):
+	case NI_RTSI_OUTPUT_RTSI_BRD(2):
+	case NI_RTSI_OUTPUT_RTSI_BRD(3):
 		return 1;
 	case NI_RTSI_OUTPUT_RTSI_OSC:
 		return (devpriv->is_m_series) ? 1 : 0;
@@ -4966,11 +4969,18 @@ static int ni_set_rtsi_routing(struct comedi_device *dev,
 		devpriv->rtsi_trig_a_output_reg |= NISTC_RTSI_TRIG(chan, src);
 		ni_stc_writew(dev, devpriv->rtsi_trig_a_output_reg,
 			      NISTC_RTSI_TRIGA_OUT_REG);
-	} else if (chan < 8) {
+	} else if (chan < NISTC_RTSI_TRIG_NUM_CHAN(devpriv->is_m_series)) {
 		devpriv->rtsi_trig_b_output_reg &= ~NISTC_RTSI_TRIG_MASK(chan);
 		devpriv->rtsi_trig_b_output_reg |= NISTC_RTSI_TRIG(chan, src);
 		ni_stc_writew(dev, devpriv->rtsi_trig_b_output_reg,
 			      NISTC_RTSI_TRIGB_OUT_REG);
+	} else if (chan != NISTC_RTSI_TRIG_OLD_CLK_CHAN) {
+		/* probably should never reach this, since the
+		 * ni_valid_rtsi_output_source above errors out if chan is too
+		 * high
+		 */
+		dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__);
+		return -EINVAL;
 	}
 	return 2;
 }
@@ -4986,12 +4996,12 @@ static unsigned int ni_get_rtsi_routing(struct comedi_device *dev,
 	} else if (chan < NISTC_RTSI_TRIG_NUM_CHAN(devpriv->is_m_series)) {
 		return NISTC_RTSI_TRIG_TO_SRC(chan,
 					      devpriv->rtsi_trig_b_output_reg);
-	} else {
-		if (chan == NISTC_RTSI_TRIG_OLD_CLK_CHAN)
-			return NI_RTSI_OUTPUT_RTSI_OSC;
-		dev_err(dev->class_dev, "bug! should never get here?\n");
-		return 0;
+	} else if (chan == NISTC_RTSI_TRIG_OLD_CLK_CHAN) {
+		return NI_RTSI_OUTPUT_RTSI_OSC;
 	}
+
+	dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__);
+	return -EINVAL;
 }
 
 static int ni_rtsi_insn_config(struct comedi_device *dev,
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 10/271 pwm: lpss: Release runtime-pm reference from the drivers remove callback

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit 42885551cedb45961879d2fc3dc3c4dc545cc23e ]

For each pwm output which gets enabled through pwm_lpss_apply(), we do a pm_runtime_get_sync().

This commit adds pm_runtime_put() calls to pwm_lpss_remove() to balance these when the driver gets removed with some of the outputs still enabled.

Fixes f080be27d7d9 ("pwm: lpss: Add support for runtime PM")
---
 drivers/pwm/pwm-lpss.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/pwm/pwm-lpss.c +6 -0
index 5208b3f80ad85..239003807c085 100644
@@ -205,6 +205,12 @@ EXPORT_SYMBOL_GPL(pwm_lpss_probe);
 
 int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
 {
+	int i;
+
+	for (i = 0; i < lpwm->info->npwm; i++) {
+		if (pwm_is_enabled(&lpwm->chip.pwms[i]))
+			pm_runtime_put(lpwm->chip.dev);
+	}
 	return pwmchip_remove(&lpwm->chip);
 }
 EXPORT_SYMBOL_GPL(pwm_lpss_remove);
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 11/271 mlxsw: reg: QEEC: Add minimum shaper fields

In reply to Greg Kroah-Hartman

From: Petr Machata <[email protected]>

[ Upstream commit 8b931821aa04823e2e5df0ae93937baabbd23286 ]

Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable configuration of minimum shaper.

Increase the QEEC length to 0x20 as well: that's the length that the register has had for a long time now, but with the configurations that mlxsw typically exercises, the firmware tolerated 0x1C-sized packets. With mise=true however, FW rejects packets unless they have the full required length.

Fixes b9b7cee40579 ("mlxsw: reg: Add QoS ETS Element Configuration register")
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/reg.h +21 -1
index b2a745b579fd1..fdc69218c8cac 100644
@@ -1873,7 +1873,7 @@ static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port,
  * Configures the ETS elements.
  */
 #define MLXSW_REG_QEEC_ID 0x400D
-#define MLXSW_REG_QEEC_LEN 0x1C
+#define MLXSW_REG_QEEC_LEN 0x20
 
 static const struct mlxsw_reg_info mlxsw_reg_qeec = {
 	.id = MLXSW_REG_QEEC_ID,
@@ -1918,6 +1918,15 @@ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8);
  */
 MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8);
 
+/* reg_qeec_mise
+ * Min shaper configuration enable. Enables configuration of the min
+ * shaper on this ETS element
+ * 0 - Disable
+ * 1 - Enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1);
+
 enum {
 	MLXSW_REG_QEEC_BYTES_MODE,
 	MLXSW_REG_QEEC_PACKETS_MODE,
@@ -1934,6 +1943,17 @@ enum {
  */
 MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1);
 
+/* The smallest permitted min shaper rate. */
+#define MLXSW_REG_QEEC_MIS_MIN	200000		/* Kbps */
+
+/* reg_qeec_min_shaper_rate
+ * Min shaper information rate.
+ * For CPU port, can only be configured for port hierarchy.
+ * When in bytes mode, value is specified in units of 1000bps.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, min_shaper_rate, 0x0C, 0, 28);
+
 /* reg_qeec_mase
  * Max shaper configuration enable. Enables configuration of the max
  * shaper on this ETS element.
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 12/271 pcrypt: use format specifier in kobject_add

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit b1e3874c75ab15288f573b3532e507c37e8e7656 ]

Passing string 'name' as the format specifier is potentially hazardous because name could (although very unlikely to) have a format specifier embedded in it causing issues when parsing the non-existent arguments to these. Follow best practice by using the "%s" format string for the string 'name'.

Cleans up clang warning:
crypto/pcrypt.c:397:40: warning: format string is not a string literal (potentially insecure) [-Wformat-security]

Fixes a3fb1e330dd2 ("pcrypt: Added sysfs interface to pcrypt")
---
 crypto/pcrypt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
crypto/pcrypt.c +1 -1
index f8ec3d4ba4a80..a5718c0a3dc4e 100644
@@ -394,7 +394,7 @@ static int pcrypt_sysfs_add(struct padata_instance *pinst, const char *name)
 	int ret;
 
 	pinst->kobj.kset = pcrypt_kset;
-	ret = kobject_add(&pinst->kobj, NULL, name);
+	ret = kobject_add(&pinst->kobj, NULL, "%s", name);
 	if (!ret)
 		kobject_uevent(&pinst->kobj, KOBJ_ADD);
 
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 13/271 exportfs: fix passing zero to ERR_PTR() warning

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 909e22e05353a783c526829427e9a8de122fba9c ]

Fix a static code checker warning:
fs/exportfs/expfs.c:171 reconnect_one() warn: passing zero to 'ERR_PTR'

The error path for lookup_one_len_unlocked failure should set err to PTR_ERR.

Fixes bbf7a8a3562f ("exportfs: move most of reconnect_path to helper function")
---
 fs/exportfs/expfs.c | 1 +
 1 file changed, 1 insertion(+)
fs/exportfs/expfs.c +1 -0
index 3706939e5dd5e..1730122b10e06 100644
@@ -146,6 +146,7 @@ static struct dentry *reconnect_one(struct vfsmount *mnt,
 	tmp = lookup_one_len_unlocked(nbuf, parent, strlen(nbuf));
 	if (IS_ERR(tmp)) {
 		dprintk("%s: lookup failed: %d\n", __func__, PTR_ERR(tmp));
+		err = PTR_ERR(tmp);
 		goto out_err;
 	}
 	if (tmp != dentry) {
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 14/271 drm/dp_mst: Skip validating ports during destruction, just ref

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

[ Upstream commit c54c7374ff44de5e609506aca7c0deae4703b6d1 ]

Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I accidentally introduced into DRM two years ago.

Pretend we have a topology like this:

|- DP-1: mst_primary

   |- DP-4: active display
   |- DP-5: disconnected
   |- DP-6: active hub
      |- DP-7: active display
      |- DP-8: disconnected
      |- DP-9: disconnected

If we unplug DP-6, the topology starting at DP-7 will be destroyed but it's payloads will live on in DP-1's VCPI allocations and thus require removal. However, this removal currently fails because drm_dp_update_payload_part1() will (rightly so) try to validate the port before accessing it, fail then abort. If we keep going, eventually we run the MST hub out of bandwidth and all new allocations will start to fail (or in my case; all new displays just start flickering a ton).

We could just teach drm_dp_update_payload_part1() not to drop the port ref in this case, but then we also need to teach drm_dp_destroy_payload_step1() to do the same thing, then hope no one ever adds anything to the that requires a validated port reference in drm_dp_destroy_connector_work(). Kind of sketchy.

So let's go with a more clever solution: any port that drm_dp_destroy_connector_work() interacts with is guaranteed to still exist in memory until we say so. While said port might not be valid we don't really care: that's the whole reason we're destroying it in the first place! So, teach drm_dp_get_validated_port_ref() to use the all mighty current_work() function to avoid attempting to validate ports from the context of mgr->destroy_connector_work. I can't see any situation where this wouldn't be safe, and this avoids having to play whack-a-mole in the future of trying to work around port validation.

Fixes 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
Cc Jerry Zuo <[email protected]>
Cc Harry Wentland <[email protected]>
Cc <[email protected]> # v4.6+
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_dp_mst_topology.c +13 -2
index e05dda92398c6..17aedaaf364c1 100644
@@ -980,9 +980,20 @@ static struct drm_dp_mst_port *drm_dp_mst_get_port_ref_locked(struct drm_dp_mst_
 static struct drm_dp_mst_port *drm_dp_get_validated_port_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
 {
 	struct drm_dp_mst_port *rport = NULL;
+
 	mutex_lock(&mgr->lock);
-	if (mgr->mst_primary)
-		rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, port);
+	/*
+	 * Port may or may not be 'valid' but we don't care about that when
+	 * destroying the port and we are guaranteed that the port pointer
+	 * will be valid until we've finished
+	 */
+	if (current_work() == &mgr->destroy_connector_work) {
+		kref_get(&port->kref);
+		rport = port;
+	} else if (mgr->mst_primary) {
+		rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary,
+						       port);
+	}
 	mutex_unlock(&mgr->lock);
 	return rport;
 }
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 15/271 net: phy: Fix not to call phy_resume() if PHY is not attached

In reply to Greg Kroah-Hartman

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached.

Fixes 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
---
 drivers/net/phy/phy_device.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/net/phy/phy_device.c +6 -5
index 3289fd910c4a6..487d0372a4441 100644
@@ -80,7 +80,7 @@ static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
 #ifdef CONFIG_PM
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
 {
 	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
@@ -92,10 +92,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* PHY not attached? May suspend if the PHY has not already been
 	 * suspended as part of a prior call to phy_disconnect() ->
 	 * phy_detach() -> phy_suspend() because the parent netdev might be the
-	 * MDIO bus driver and clock gated at this point.
+	 * MDIO bus driver and clock gated at this point. Also may resume if
+	 * PHY is not attached.
 	 */
 	if (!netdev)
-		return !phydev->suspended;
+		return suspend ? !phydev->suspended : phydev->suspended;
 
 	/* Don't suspend PHY if the attached netdev parent may wakeup.
 	 * The parent may point to a PCI device, as in tg3 driver.
@@ -125,7 +126,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
 	if (phydev->attached_dev && phydev->adjust_link)
 		phy_stop_machine(phydev);
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, true))
 		return 0;
 
 	return phy_suspend(phydev);
@@ -136,7 +137,7 @@ static int mdio_bus_phy_resume(struct device *dev)
 	struct phy_device *phydev = to_phy_device(dev);
 	int ret;
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, false))
 		goto no_resume;
 
 	ret = phy_resume(phydev);
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 16/271 pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 1ebc589a7786f17f97b9e87b44e0fb4d0290d8f8 ]

The gether_gmii_mux[] array contains the REF125CK pin mark, but the gether_gmii_pins[] array lacks the corresponding pin number.

Fixes bae11d30d0cafdc5 ("sh-pfc: r8a7740: Add GETHER pin groups and functions")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-r8a7740.c +1 -1
index 35f436bcb8491..d8077065636e3 100644
@@ -1982,7 +1982,7 @@ static const unsigned int gether_gmii_pins[] = {
 	 */
 	185, 186, 187, 188, 189, 190, 191, 192, 174, 161, 204,
 	171, 170, 169, 168, 167, 166, 173, 172, 176, 184, 183, 203,
-	205, 163, 206, 207,
+	205, 163, 206, 207, 158,
 };
 static const unsigned int gether_gmii_mux[] = {
 	ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK,
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/271 pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 96bb2a6ab4eca10e5b6490b3f0738e9f7ec22c2b ]

The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers, but the lcd0_data24_1_mux[] array lacks the corresponding pin marks.

Fixes 06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/sh-pfc/pfc-r8a7740.c +1 -0
index d8077065636e3..e9739dbcb356e 100644
@@ -2154,6 +2154,7 @@ static const unsigned int lcd0_data24_1_mux[] = {
 	LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK,
 	LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK,
 	LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK,
+	LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK,
 	LCD0_D16_MARK, LCD0_D17_MARK, LCD0_D18_PORT163_MARK,
 	LCD0_D19_PORT162_MARK, LCD0_D20_PORT161_MARK, LCD0_D21_PORT158_MARK,
 	LCD0_D22_PORT160_MARK, LCD0_D23_PORT159_MARK,
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 18/271 pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 884fa25fb6e5e63ab970d612a628313bb68f37cc ]

The qspi_data4_b_mux[] array contains pin marks for the clock and chip select pins. The qspi_data4_b_pins[] array rightfully does not contain the corresponding pin numbers, as the control pins are provided by a separate group (qspi_ctrl_b).

Fixes 2d0c386f135e4186 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/pinctrl/sh-pfc/pfc-r8a7791.c +1 -2
index baa98d7fe9473..fcf731994811f 100644
@@ -3136,8 +3136,7 @@ static const unsigned int qspi_data4_b_pins[] = {
 	RCAR_GP_PIN(6, 4),
 };
 static const unsigned int qspi_data4_b_mux[] = {
-	SPCLK_B_MARK, MOSI_IO0_B_MARK, MISO_IO1_B_MARK,
-	IO2_B_MARK, IO3_B_MARK, SSL_B_MARK,
+	MOSI_IO0_B_MARK, MISO_IO1_B_MARK, IO2_B_MARK, IO3_B_MARK,
 };
 /* - SCIF0 ------------------------------------------------------------------ */
 static const unsigned int scif0_data_pins[] = {
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 19/271 pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 0d6256cb880166a4111bebce35790019e56b6e1b ]

The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of the color components. The vin1_b_data18_pins[] array rightfully does not include the corresponding pin numbers, as RGB18 is subset of RGB24, containing only the 6 MSB bits of each component.

Fixes 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/pinctrl/sh-pfc/pfc-r8a7791.c +0 -3
index fcf731994811f..1e7f32b5dce8c 100644
@@ -4264,17 +4264,14 @@ static const unsigned int vin1_b_data18_pins[] = {
 };
 static const unsigned int vin1_b_data18_mux[] = {
 	/* B */
-	VI1_DATA0_B_MARK, VI1_DATA1_B_MARK,
 	VI1_DATA2_B_MARK, VI1_DATA3_B_MARK,
 	VI1_DATA4_B_MARK, VI1_DATA5_B_MARK,
 	VI1_DATA6_B_MARK, VI1_DATA7_B_MARK,
 	/* G */
-	VI1_G0_B_MARK, VI1_G1_B_MARK,
 	VI1_G2_B_MARK, VI1_G3_B_MARK,
 	VI1_G4_B_MARK, VI1_G5_B_MARK,
 	VI1_G6_B_MARK, VI1_G7_B_MARK,
 	/* R */
-	VI1_R0_B_MARK, VI1_R1_B_MARK,
 	VI1_R2_B_MARK, VI1_R3_B_MARK,
 	VI1_R4_B_MARK, VI1_R5_B_MARK,
 	VI1_R6_B_MARK, VI1_R7_B_MARK,
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/271 pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 124cde98f856b6206b804acbdec3b7c80f8c3427 ]

The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the tpu4_to3_pins[] array lacks the corresponding pin number.

Add the missing pin number, for non-GPIO pin F26.

Fixes 5da4eb049de803c7 ("sh-pfc: sh73a0: Add TPU pin groups and functions")
---
 drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/sh-pfc/pfc-sh73a0.c +1 -0
index d25e6f674d0ab..f8fbedb46585d 100644
@@ -3086,6 +3086,7 @@ static const unsigned int tpu4_to2_mux[] = {
 };
 static const unsigned int tpu4_to3_pins[] = {
 	/* TO */
+	PIN_NUMBER(6, 26),
 };
 static const unsigned int tpu4_to3_mux[] = {
 	TPU4TO3_MARK,
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 21/271 pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 6a6c195d98a1a5e70faa87f594d7564af1dd1bed ]

The Peripheral Function Select Register 9 contains 12 fields, but the variable field descriptor contains a 13th bogus field of 3 bits.

Fixes 43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-r8a7794.c +1 -1
index ef093ac0cf2fb..fe8c9c24634d8 100644
@@ -4826,7 +4826,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_AVB_MDC, FN_SSI_SDATA6_B, 0, 0, }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR9", 0xE6060044, 32,
-			     1, 3, 3, 3, 3, 2, 2, 3, 3, 3, 3, 3, 3) {
+			     1, 3, 3, 3, 3, 2, 2, 3, 3, 3, 3, 3) {
 		/* IP9_31 [1] */
 		0, 0,
 		/* IP9_30_28 [3] */
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 22/271 pinctrl: sh-pfc: sh7734: Add missing IPSR11 field

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 94482af7055e1ffa211c1135256b85590ebcac99 ]

The Peripheral Function Select Register 11 contains 3 reserved bits and 15 variable-width fields, but the variable field descriptor does not contain the 3-bit field IP11[25:23].

Fixes 856cb4bb337ee504 ("sh: Add support pinmux for SH7734")
---
 drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-sh7734.c +1 -1
index 3eccc9b3ca84a..05ccb27f77818 100644
@@ -2237,7 +2237,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_LCD_DATA15_B, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR11", 0xFFFC0048, 32,
-			3, 1, 2, 2, 2, 3, 3, 1, 2, 3, 3, 1, 1, 1, 1) {
+			3, 1, 2, 3, 2, 2, 3, 3, 1, 2, 3, 3, 1, 1, 1, 1) {
 	    /* IP11_31_29 [3] */
 	    0, 0, 0, 0, 0, 0, 0, 0,
 	    /* IP11_28 [1] */
Signature · 1 line
2.20.1
author maintainer
#23 lore raw

PATCH 23/271 pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 9540cbdfcd861caf67a6f0e4bb7f46d41c4aad86 ]

The Port C I/O Register 0 contains 7 reserved bits, but the descriptor contains only dummy configuration values for 6 reserved bits, thus breaking the configuration of all subsequent fields in the register.

Fix this by adding the two missing configuration values.

Fixes f5e811f2a43117b2 ("sh-pfc: Add sh7269 pinmux support")
---
 drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-sh7269.c +1 -1
index a50d22bef1f44..cfdb4fc177c3e 100644
@@ -2119,7 +2119,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	},
 
 	{ PINMUX_CFG_REG("PCIOR0", 0xfffe3852, 16, 1) {
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 		PC8_IN, PC8_OUT,
 		PC7_IN, PC7_OUT,
 		PC6_IN, PC6_OUT,
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 24/271 pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 4d374bacd7c9665179f9752a52d5d602c45d8190 ]

The IP10[5:3] field in Peripheral Function Select Register 10 has a width of 3 bits, i.e. it allows programming one out of 8 different configurations.
However, 9 values are provided instead of 8, overflowing into the subsequent field in the register, and thus breaking the configuration of the latter.

Fix this by dropping a bogus zero value.

Fixes ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
---
 drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-sh7734.c +1 -1
index 05ccb27f77818..c691e5e9d9dea 100644
@@ -2231,7 +2231,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_LCD_CL1_B, 0, 0,
 	    /* IP10_5_3 [3] */
 		FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
-		FN_LCD_DON_B, 0, 0, 0,
+		FN_LCD_DON_B, 0, 0,
 	    /* IP10_2_0 [3] */
 		FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B,
 		FN_LCD_DATA15_B, 0, 0, 0 }
Signature · 1 line
2.20.1
author maintainer
#25 lore raw

PATCH 25/271 Input: nomadik-ske-keypad - fix a loop timeout test

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 4d8f727b83bcd6702c2d210330872c9122d2d360 ]

The loop exits with "timeout" set to -1 not to 0.

Fixes 1158f0f16224 ("Input: add support for Nomadik SKE keypad controller")
---
 drivers/input/keyboard/nomadik-ske-keypad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/keyboard/nomadik-ske-keypad.c +1 -1
index 8567ee47761e1..ae3b045570740 100644
@@ -100,7 +100,7 @@ static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
 	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
 		cpu_relax();
 
-	if (!timeout)
+	if (timeout == -1)
 		return -EINVAL;
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#26 lore raw

PATCH 26/271 clk: highbank: fix refcount leak in hb_clk_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 5eb8ba90958de1285120dae5d3a5d2b1a360b3b4 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 26cae166cff9 ("ARM: highbank: remove custom .init_time hook")
---
 drivers/clk/clk-highbank.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/clk-highbank.c +1 -0
index 727ed8e1bb726..8e4581004695c 100644
@@ -293,6 +293,7 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
 	/* Map system registers */
 	srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
 	hb_clk->reg = of_iomap(srnp, 0);
+	of_node_put(srnp);
 	BUG_ON(!hb_clk->reg);
 	hb_clk->reg += reg;
 
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 27/271 clk: qoriq: fix refcount leak in clockgen_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 70af6c5b5270e8101f318c4b69cc98a726edfab9 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 0dfc86b3173f ("clk: qoriq: Move chip-specific knowledge into driver")
---
 drivers/clk/clk-qoriq.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/clk-qoriq.c +1 -0
index cdce49f6476aa..65876ff6df411 100644
@@ -1245,6 +1245,7 @@ static void __init clockgen_init(struct device_node *np)
 				pr_err("%s: Couldn't map %s regs\n", __func__,
 				       guts->full_name);
 			}
+			of_node_put(guts);
 		}
 
 	}
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 28/271 clk: socfpga: fix refcount leak

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 7f9705beeb3759e69165e7aff588f6488ff6c1ac ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 5343325ff3dd ("clk: socfpga: add a clock driver for the Arria 10 platform")
Fixes a30d27ed739b ("clk: socfpga: fix clock driver for 3.15")
---
 drivers/clk/socfpga/clk-pll-a10.c | 1 +
 drivers/clk/socfpga/clk-pll.c     | 1 +
 2 files changed, 2 insertions(+)
drivers/clk/socfpga/clk-pll-a10.c +1 -0
index 35fabe1a32c30..269467e8e07e1 100644
@@ -95,6 +95,7 @@ static struct clk * __init __socfpga_pll_init(struct device_node *node,
 
 	clkmgr_np = of_find_compatible_node(NULL, NULL, "altr,clk-mgr");
 	clk_mgr_a10_base_addr = of_iomap(clkmgr_np, 0);
+	of_node_put(clkmgr_np);
 	BUG_ON(!clk_mgr_a10_base_addr);
 	pll_clk->hw.reg = clk_mgr_a10_base_addr + reg;
 
drivers/clk/socfpga/clk-pll.c +1 -0
index c7f463172e4b9..b4b44e9b59011 100644
@@ -100,6 +100,7 @@ static __init struct clk *__socfpga_pll_init(struct device_node *node,
 
 	clkmgr_np = of_find_compatible_node(NULL, NULL, "altr,clk-mgr");
 	clk_mgr_base_addr = of_iomap(clkmgr_np, 0);
+	of_node_put(clkmgr_np);
 	BUG_ON(!clk_mgr_base_addr);
 	pll_clk->hw.reg = clk_mgr_base_addr + reg;
 
Signature · 1 line
2.20.1
author maintainer
#29 lore raw

PATCH 29/271 clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit cee82eb9532090cd1dc953e845d71f9b1445c84e ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes e062b571777f ("clk: exynos4: register clocks using common clock framework")
---
 drivers/clk/samsung/clk-exynos4.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/samsung/clk-exynos4.c +1 -0
index faab9b31baf5b..91f9b79e39411 100644
@@ -1225,6 +1225,7 @@ static unsigned long __init exynos4_get_xom(void)
 			xom = readl(chipid_base + 8);
 
 		iounmap(chipid_base);
+		of_node_put(np);
 	}
 
 	return xom;
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 30/271 clk: imx6q: fix refcount leak in imx6q_clocks_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit c9ec1d8fef31b5fc9e90e99f9bd685db5caa7c5e ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 2acd1b6f889c ("ARM: i.MX6: implement clocks using common clock framework")
---
 drivers/clk/imx/clk-imx6q.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/imx/clk-imx6q.c +1 -0
index 14682df5d3123..d83f6221f1b00 100644
@@ -174,6 +174,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 
 	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
 	if (clk_on_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 31/271 clk: imx6sx: fix refcount leak in imx6sx_clocks_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 1731e14fb30212dd8c1e9f8fc1af061e56498c55 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes d55135689019 ("ARM: imx: add clock driver for imx6sx")
---
 drivers/clk/imx/clk-imx6sx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/imx/clk-imx6sx.c +1 -0
index b5c96de41ccf9..8bbc2542f2f70 100644
@@ -164,6 +164,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 
 	clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
 	clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 32/271 clk: imx7d: fix refcount leak in imx7d_clocks_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 5f8c183a996b76bb09748073c856e4246fd4ce95 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 8f6d8094b215 ("ARM: imx: add imx7d clk tree support")
---
 drivers/clk/imx/clk-imx7d.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/imx/clk-imx7d.c +1 -0
index e7c7353a86fc6..8c0c0d0151321 100644
@@ -415,6 +415,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 
 	clks[IMX7D_PLL_ARM_MAIN_SRC]  = imx_clk_mux("pll_arm_main_src", base + 0x60, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
 	clks[IMX7D_PLL_DRAM_MAIN_SRC] = imx_clk_mux("pll_dram_main_src", base + 0x70, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 33/271 clk: vf610: fix refcount leak in vf610_clocks_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 567177024e0313e4f0dcba7ba10c0732e50e655d ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 1f2c5fd5f048 ("ARM: imx: add VF610 clock support")
---
 drivers/clk/imx/clk-vf610.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/imx/clk-vf610.c +1 -0
index 0476353ab423f..a19ab032d0731 100644
@@ -203,6 +203,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
 	anatop_base = of_iomap(np, 0);
 	BUG_ON(!anatop_base);
+	of_node_put(np);
 
 	np = ccm_node;
 	ccm_base = of_iomap(np, 0);
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 34/271 clk: armada-370: fix refcount leak in a370_clk_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit a3c24050bdf70c958a8d98c2823b66ea761e6a31 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 07ad6836fa21 ("clk: mvebu: armada-370: maintain clock init order")
---
 drivers/clk/mvebu/armada-370.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/clk/mvebu/armada-370.c +3 -1
index 2c7c1085f8830..8fdfa97900cd8 100644
@@ -177,8 +177,10 @@ static void __init a370_clk_init(struct device_node *np)
 
 	mvebu_coreclk_setup(np, &a370_coreclks);
 
-	if (cgnp)
+	if (cgnp) {
 		mvebu_clk_gating_setup(cgnp, a370_gating_desc);
+		of_node_put(cgnp);
+	}
 }
 CLK_OF_DECLARE(a370_clk, "marvell,armada-370-core-clock", a370_clk_init);
 
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 35/271 clk: kirkwood: fix refcount leak in kirkwood_clk_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit e7beeab9c61591cd0e690d8733d534c3f4278ff8 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 58d516ae95cb ("clk: mvebu: kirkwood: maintain clock init order")
---
 drivers/clk/mvebu/kirkwood.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/mvebu/kirkwood.c +2 -0
index a2a8d614039da..890ebf623261b 100644
@@ -333,6 +333,8 @@ static void __init kirkwood_clk_init(struct device_node *np)
 	if (cgnp) {
 		mvebu_clk_gating_setup(cgnp, kirkwood_gating_desc);
 		kirkwood_clk_muxing_setup(cgnp, kirkwood_mux_desc);
+
+		of_node_put(cgnp);
 	}
 }
 CLK_OF_DECLARE(kirkwood_clk, "marvell,kirkwood-core-clock",
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 36/271 clk: armada-xp: fix refcount leak in axp_clk_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit db20a90a4b6745dad62753f8bd2f66afdd5abc84 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 0a11a6ae9437 ("clk: mvebu: armada-xp: maintain clock init order")
---
 drivers/clk/mvebu/armada-xp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/clk/mvebu/armada-xp.c +3 -1
index b3094315a3c0f..2fa15a2747190 100644
@@ -202,7 +202,9 @@ static void __init axp_clk_init(struct device_node *np)
 
 	mvebu_coreclk_setup(np, &axp_coreclks);
 
-	if (cgnp)
+	if (cgnp) {
 		mvebu_clk_gating_setup(cgnp, axp_gating_desc);
+		of_node_put(cgnp);
+	}
 }
 CLK_OF_DECLARE(axp_clk, "marvell,armada-xp-core-clock", axp_clk_init);
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 37/271 clk: dove: fix refcount leak in dove_clk_init()

In reply to Greg Kroah-Hartman

From: Yangtao Li <[email protected]>

[ Upstream commit 8d726c5128298386b907963033be93407b0c4275 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Fixes 8f7fc5450b64 ("clk: mvebu: dove: maintain clock init order")
Fixes 63b8d92c793f ("clk: add Dove PLL divider support for GPU, VMeta and AXI clocks")
---
 drivers/clk/mvebu/dove.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/clk/mvebu/dove.c +6 -2
index 59fad9546c847..5f258c9bb68bf 100644
@@ -190,10 +190,14 @@ static void __init dove_clk_init(struct device_node *np)
 
 	mvebu_coreclk_setup(np, &dove_coreclks);
 
-	if (ddnp)
+	if (ddnp) {
 		dove_divider_clk_init(ddnp);
+		of_node_put(ddnp);
+	}
 
-	if (cgnp)
+	if (cgnp) {
 		mvebu_clk_gating_setup(cgnp, dove_gating_desc);
+		of_node_put(cgnp);
+	}
 }
 CLK_OF_DECLARE(dove_clk, "marvell,dove-core-clock", dove_clk_init);
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 38/271 IB/usnic: Fix out of bounds index check in query pkey

In reply to Greg Kroah-Hartman

From: Gal Pressman <[email protected]>

[ Upstream commit 4959d5da5737dd804255c75b8cea0a2929ce279a ]

The pkey table size is one element, index should be tested for > 0 instead of > 1.

Fixes e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
---
 drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/usnic/usnic_ib_verbs.c +1 -1
index a5bfbba6bbac0..cacb720f44a02 100644
@@ -425,7 +425,7 @@ int usnic_ib_query_gid(struct ib_device *ibdev, u8 port, int index,
 int usnic_ib_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
 				u16 *pkey)
 {
-	if (index > 1)
+	if (index > 0)
 		return -EINVAL;
 
 	*pkey = 0xffff;
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 39/271 RDMA/ocrdma: Fix out of bounds index check in query pkey

In reply to Greg Kroah-Hartman

From: Gal Pressman <[email protected]>

[ Upstream commit b188940796c7be31c1b8c25a9a0e0842c2e7a49e ]

The pkey table size is one element, index should be tested for > 0 instead of > 1.

Fixes fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
---
 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +1 -1
index 6af44f8db3d54..4d28bd8eff01c 100644
@@ -55,7 +55,7 @@
 
 int ocrdma_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey)
 {
-	if (index > 1)
+	if (index > 0)
 		return -EINVAL;
 
 	*pkey = 0xffff;
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/271 RDMA/qedr: Fix out of bounds index check in query pkey

In reply to Greg Kroah-Hartman

From: Gal Pressman <[email protected]>

[ Upstream commit dbe30dae487e1a232158c24b432d45281c2805b7 ]

The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN.

Fixes a7efd7773e31 ("qedr: Add support for PD,PKEY and CQ verbs")
---
 drivers/infiniband/hw/qedr/verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/qedr/verbs.c +1 -1
index cd0408c2b376f..7603a1641c7d8 100644
@@ -54,7 +54,7 @@
 
 int qedr_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey)
 {
-	if (index > QEDR_ROCE_PKEY_TABLE_LEN)
+	if (index >= QEDR_ROCE_PKEY_TABLE_LEN)
 		return -EINVAL;
 
 	*pkey = QEDR_ROCE_PKEY_DEFAULT;
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/271 arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD

In reply to Greg Kroah-Hartman

From: Loic Poulain <[email protected]>

[ Upstream commit af61bef513ba179559e56908b8c465e587bc3890 ]

In the same way as for msm8974-hammerhead, l11 load, used for SDCARD VMMC, needs to be increased in order to prevent any voltage drop issues (due to limited current) happening with some SDCARDS or during specific operations (e.g. write).

Tested on Dragonboard-410c and DART-SD410 boards.

Fixes 4c7d53d16d77 (arm64: dts: apq8016-sbc: add regulators support)
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +2 -0
index 601be6127628a..948efff7d830c 100644
@@ -355,6 +355,8 @@
 	l11 {
 		regulator-min-microvolt = <1750000>;
 		regulator-max-microvolt = <3337000>;
+		regulator-allow-set-load;
+		regulator-system-load = <200000>;
 	};
 
 	l12 {
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 42/271 drm/etnaviv: NULL vs IS_ERR() buf in etnaviv_core_dump()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit f8261c376e7f8cb9024af5a6c54be540c7f9108e ]

The etnaviv_gem_get_pages() never returns NULL. It returns error pointers on error.

Fixes a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
---
 drivers/gpu/drm/etnaviv/etnaviv_dump.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/etnaviv/etnaviv_dump.c +1 -1
index 2bef501d4a172..5af7c2594a79e 100644
@@ -206,7 +206,7 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu)
 		mutex_lock(&obj->lock);
 		pages = etnaviv_gem_get_pages(obj);
 		mutex_unlock(&obj->lock);
-		if (pages) {
+		if (!IS_ERR(pages)) {
 			int j;
 
 			iter.hdr->data[0] = bomap - bomap_start;
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/271 media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

In reply to Greg Kroah-Hartman

From: Pawe? Chmiel <[email protected]>

[ Upstream commit 19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ]

This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test.
Previously it was complaining that step was bigger than difference between max and min.

Fixes 15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support")
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/s5p-jpeg/jpeg-core.c +1 -1
index c89922fb42cef..a63f4eec366eb 100644
@@ -1963,7 +1963,7 @@ static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx)
 
 		v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops,
 				  V4L2_CID_JPEG_RESTART_INTERVAL,
-				  0, 3, 0xffff, 0);
+				  0, 0xffff, 1, 0);
 		if (ctx->jpeg->variant->version == SJPEG_S5P)
 			mask = ~0x06; /* 422, 420 */
 	}
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/271 crypto: tgr192 - fix unaligned memory access

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit f990f7fb58ac8ac9a43316f09a48cff1a49dda42 ]

Fix an unaligned memory access in tgr192_transform() by using the unaligned access helpers.

Fixes 06ace7a9bafe ("[CRYPTO] Use standard byte order macros wherever possible")
---
 crypto/tgr192.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
crypto/tgr192.c +3 -3
index 321bc6ff2a9d1..904c8444aa0a2 100644
@@ -25,8 +25,9 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <asm/byteorder.h>
 #include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
 
 #define TGR192_DIGEST_SIZE 24
 #define TGR160_DIGEST_SIZE 20
@@ -468,10 +469,9 @@ static void tgr192_transform(struct tgr192_ctx *tctx, const u8 * data)
 	u64 a, b, c, aa, bb, cc;
 	u64 x[8];
 	int i;
-	const __le64 *ptr = (const __le64 *)data;
 
 	for (i = 0; i < 8; i++)
-		x[i] = le64_to_cpu(ptr[i]);
+		x[i] = get_unaligned_le64(data + i * sizeof(__le64));
 
 	/* save */
 	a = aa = tctx->a;
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 45/271 ASoC: imx-sgtl5000: put of nodes if finding codec fails

In reply to Greg Kroah-Hartman

From: Stefan Agner <[email protected]>

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec fails.

Fixes 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
---
 sound/soc/fsl/imx-sgtl5000.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/fsl/imx-sgtl5000.c +2 -1
index 8e525f7ac08d1..3d99a8579c99f 100644
@@ -119,7 +119,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/271 IB/iser: Pass the correct number of entries for dma mapped SGL

In reply to Greg Kroah-Hartman

From: Israel Rukshin <[email protected]>

[ Upstream commit 57b26497fabe1b9379b59fbc7e35e608e114df16 ]

ib_dma_map_sg() augments the SGL into a 'dma mapped SGL'. This process may change the number of entries and the lengths of each entry.

Code that touches dma_address is iterating over the 'dma mapped SGL' and must use dma_nents which returned from ib_dma_map_sg().

ib_sg_to_pages() and ib_map_mr_sg() are using dma_address so they must use dma_nents.

Fixes 39405885005a ("IB/iser: Port to new fast registration API")
Fixes bfe066e256d5 ("IB/iser: Reuse ib_sg_to_pages")
---
 drivers/infiniband/ulp/iser/iser_memory.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/infiniband/ulp/iser/iser_memory.c +5 -5
index 9c3e9ab53a415..759c2fe033e71 100644
@@ -240,8 +240,8 @@ int iser_fast_reg_fmr(struct iscsi_iser_task *iser_task,
 	page_vec->npages = 0;
 	page_vec->fake_mr.page_size = SIZE_4K;
 	plen = ib_sg_to_pages(&page_vec->fake_mr, mem->sg,
-			      mem->size, NULL, iser_set_page);
-	if (unlikely(plen < mem->size)) {
+			      mem->dma_nents, NULL, iser_set_page);
+	if (unlikely(plen < mem->dma_nents)) {
 		iser_err("page vec too short to hold this SG\n");
 		iser_data_buf_dump(mem, device->ib_device);
 		iser_dump_page_vec(page_vec);
@@ -450,10 +450,10 @@ static int iser_fast_reg_mr(struct iscsi_iser_task *iser_task,
 
 	ib_update_fast_reg_key(mr, ib_inc_rkey(mr->rkey));
 
-	n = ib_map_mr_sg(mr, mem->sg, mem->size, NULL, SIZE_4K);
-	if (unlikely(n != mem->size)) {
+	n = ib_map_mr_sg(mr, mem->sg, mem->dma_nents, NULL, SIZE_4K);
+	if (unlikely(n != mem->dma_nents)) {
 		iser_err("failed to map sg (%d/%d)\n",
-			 n, mem->size);
+			 n, mem->dma_nents);
 		return n < 0 ? n : -EINVAL;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/271 rtc: cmos: ignore bogus century byte

In reply to Greg Kroah-Hartman

From: Eric Wong <[email protected]>

[ Upstream commit 2a4daadd4d3e507138f8937926e6a4df49c6bfdc ]

Older versions of Libreboot and Coreboot had an invalid value (`3' in my case) in the century byte affecting the GM45 in the Thinkpad X200. Not everybody's updated their firmwares, and Linux <= 4.2 was able to read the RTC without problems, so workaround this by ignoring invalid values.

Fixes 3c217e51d8a272b9 ("rtc: cmos: century support")
Cc Alexandre Belloni <[email protected]>
Cc Alessandro Zummo <[email protected]>
Cc Sylvain Chouleur <[email protected]>
Cc Patrick McDermott <[email protected]>
---
 drivers/rtc/rtc-mc146818-lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-mc146818-lib.c +1 -1
index 2f1772a358ca5..18a6f15e313d8 100644
@@ -82,7 +82,7 @@ unsigned int mc146818_get_time(struct rtc_time *time)
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century)
+	if (century > 20)
 		time->tm_year += (century - 19) * 100;
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/271 clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 108a459ef4cd17a28711d81092044e597b5c7618 ]

The PLL-MIPI clock is somewhat special as it has its own LDOs which need to be turned on for this PLL to actually work and output a clock signal.

Add the 2 LDO enable bits to the gate bits.

Fixes 5690879d93e8 ("clk: sunxi-ng: Add A23 CCU")
---
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/sunxi-ng/ccu-sun8i-a23.c +1 -1
index 5c6d37bdf247c..765c6977484e7 100644
@@ -132,7 +132,7 @@ static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi",
 				    8, 4,		/* N */
 				    4, 2,		/* K */
 				    0, 4,		/* M */
-				    BIT(31),		/* gate */
+				    BIT(31) | BIT(23) | BIT(22), /* gate */
 				    BIT(28),		/* lock */
 				    CLK_SET_RATE_UNGATE);
 
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/271 iwlwifi: mvm: fix A-MPDU reference assignment

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit 1f7698abedeeb3fef3cbcf78e16f925df675a179 ]

The current code assigns the reference, and then goes to increment it if the toggle bit has changed. That way, we get

Toggle  0  0  0  0  1  1  1  1
ID      1  1  1  1  1  2  2  2

Fix that by assigning the post-toggle ID to get

Toggle  0  0  0  0  1  1  1  1
ID      1  1  1  1  2  2  2  2
Fixes fbe4112791b8 ("iwlwifi: mvm: update mpdu metadata API")
---
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +1 -1
index c2bbc8c17beb9..bc06d87a0106c 100644
@@ -810,12 +810,12 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi,
 		bool toggle_bit = phy_info & IWL_RX_MPDU_PHY_AMPDU_TOGGLE;
 
 		rx_status->flag |= RX_FLAG_AMPDU_DETAILS;
-		rx_status->ampdu_reference = mvm->ampdu_ref;
 		/* toggle is switched whenever new aggregation starts */
 		if (toggle_bit != mvm->ampdu_toggle) {
 			mvm->ampdu_ref++;
 			mvm->ampdu_toggle = toggle_bit;
 		}
+		rx_status->ampdu_reference = mvm->ampdu_ref;
 	}
 
 	rcu_read_lock();
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/271 tty: ipwireless: Fix potential NULL pointer dereference

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 7dd50e205b3348dc7784efbdf85723551de64a25 ]

There is a potential NULL pointer dereference in case alloc_ctrl_packet() fails and returns NULL.

Fixes 099dc4fb6265 ("ipwireless: driver for PC Card 3G/UMTS modem")
---
 drivers/tty/ipwireless/hardware.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/tty/ipwireless/hardware.c +2 -0
index df0204b6148fb..4417f75684221 100644
@@ -1515,6 +1515,8 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw)
 			sizeof(struct ipw_setup_get_version_query_packet),
 			ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
 			TL_SETUP_SIGNO_GET_VERSION_QRY);
+	if (!ver_packet)
+		return;
 	ver_packet->header.length = sizeof(struct tl_setup_get_version_qry);
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/271 crypto: crypto4xx - Fix wrong ppc4xx_trng_probe()/ppc4xx_trng_remove() arguments

In reply to Greg Kroah-Hartman

From: Corentin Labbe <[email protected]>

[ Upstream commit 6e88098ca43a3d80ae86908f7badba683c8a0d84 ]

When building without CONFIG_HW_RANDOM_PPC4XX, I hit the following build failure:
drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_probe':
drivers/crypto/amcc/crypto4xx_core.c:1407:20: error: passing argument 1 of 'ppc4xx_trng_probe' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0:
drivers/crypto/amcc/crypto4xx_trng.h:28:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *' drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_remove':
drivers/crypto/amcc/crypto4xx_core.c:1434:21: error: passing argument 1 of 'ppc4xx_trng_remove' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0:
drivers/crypto/amcc/crypto4xx_trng.h:30:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *'

This patch fix the needed argument of ppc4xx_trng_probe()/ppc4xx_trng_remove() in that case.

Fixes 5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
---
 drivers/crypto/amcc/crypto4xx_trng.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/crypto/amcc/crypto4xx_trng.h +2 -2
index 931d22531f515..7bbda51b7337c 100644
@@ -26,9 +26,9 @@ void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev);
 void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev);
 #else
 static inline void ppc4xx_trng_probe(
-	struct crypto4xx_device *dev __maybe_unused) { }
+	struct crypto4xx_core_device *dev __maybe_unused) { }
 static inline void ppc4xx_trng_remove(
-	struct crypto4xx_device *dev __maybe_unused) { }
+	struct crypto4xx_core_device *dev __maybe_unused) { }
 #endif
 
 #endif
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/271 ARM: dts: lpc32xx: add required clocks property to keypad device node

In reply to Greg Kroah-Hartman

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit 3e88bc38b9f6fe4b69cecf81badd3c19fde97f97 ]

NXP LPC32xx keypad controller requires a clock property to be defined.

The change fixes the driver initialization problem:

lpc32xx_keys 40050000.key: failed to get clock
lpc32xx_keys: probe of 40050000.key failed with error -2

Fixes 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
---
 arch/arm/boot/dts/lpc32xx.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/lpc32xx.dtsi +1 -0
index 5fa3111731cb0..da375813afd04 100644
@@ -462,6 +462,7 @@
 			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_KEY>;
 				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 53/271 ARM: dts: lpc32xx: reparent keypad controller to SIC1

In reply to Greg Kroah-Hartman

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit 489261c45f0ebbc1c2813f337bbdf858267f5033 ]

After switching to a new interrupt controller scheme by separating SIC1 and SIC2 from MIC interrupt controller just one SoC keypad controller was not taken into account, fix it now:

  WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:524 irq_domain_associate+0x50/0x1b0
  error: hwirq 0x36 is too large for interrupt-controller@40008000
  ...
  lpc32xx_keys 40050000.key: failed to get platform irq
  lpc32xx_keys: probe of 40050000.key failed with error -22
Fixes 9b8ad3fb81ae ("ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC")
---
 arch/arm/boot/dts/lpc32xx.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/lpc32xx.dtsi +2 -1
index da375813afd04..6bd196457ccc2 100644
@@ -463,7 +463,8 @@
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_KEY>;
-				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 54/271 ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant

In reply to Greg Kroah-Hartman

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit 7a0790a4121cbcd111cc537cdc801c46ccb789ee ]

ARM PrimeCell PL111 LCD controller is found on On NXP LPC3230 and LPC3250 SoCs variants, the original reference in compatible property to an older one ARM PrimeCell PL110 is invalid.

Fixes e04920d9efcb3 ("ARM: LPC32xx: DTS files for device tree conversion")
---
 arch/arm/boot/dts/lpc32xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/lpc32xx.dtsi +1 -1
index 6bd196457ccc2..3adbbaff79715 100644
@@ -139,7 +139,7 @@
 		};
 
 		clcd: clcd@31040000 {
-			compatible = "arm,pl110", "arm,primecell";
+			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_LCD>;
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/271 ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property

In reply to Greg Kroah-Hartman

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit 30fc01bae3cda747e7d9c352b1aa51ca113c8a9d ]

The originally added ARM PrimeCell PL111 clocks property misses the required "clcdclk" clock, which is the same as a clock to enable the LCD controller on NXP LPC3230 and NXP LPC3250 SoCs.

Fixes 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
---
 arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/lpc32xx.dtsi +2 -2
index 3adbbaff79715..2802c9565b6ca 100644
@@ -142,8 +142,8 @@
 			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_LCD>;
-			clock-names = "apb_pclk";
+			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
 			status = "disabled";
 		};
 
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 56/271 ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage

In reply to Greg Kroah-Hartman

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]

The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which supplies SD/MMC card's power, has a constant output voltage level of either 3.15V or 3.3V, the actual value depends on JP4 position, the power rail is referenced as VCC_SDIO in the board hardware manual.

Fixes d06670e96267 ("arm: dts: phy3250: add SD fixed regulator")
---
 arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/lpc3250-phy3250.dts +2 -2
index b7bd3a110a8dd..dd0bdf765599d 100644
@@ -49,8 +49,8 @@
 		sd_reg: regulator@2 {
 			compatible = "regulator-fixed";
 			regulator-name = "sd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio 5 5 0>;
 			enable-active-high;
 		};
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 57/271 iwlwifi: mvm: fix RSS config command

In reply to Greg Kroah-Hartman

From: Sara Sharon <[email protected]>

[ Upstream commit 608dce95db10b8ee1a26dbce3f60204bb69812a5 ]

The hash mask is a bitmap, so we should use BIT() on the enum values.

Fixes 43413a975d06 ("iwlwifi: mvm: support rss queues configuration command")
---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/wireless/intel/iwlwifi/mvm/fw.c +6 -6
index 2ec3a91a0f6b6..bba7ace1a744d 100644
@@ -106,12 +106,12 @@ static int iwl_send_rss_cfg_cmd(struct iwl_mvm *mvm)
 	int i;
 	struct iwl_rss_config_cmd cmd = {
 		.flags = cpu_to_le32(IWL_RSS_ENABLE),
-		.hash_mask = IWL_RSS_HASH_TYPE_IPV4_TCP |
-			     IWL_RSS_HASH_TYPE_IPV4_UDP |
-			     IWL_RSS_HASH_TYPE_IPV4_PAYLOAD |
-			     IWL_RSS_HASH_TYPE_IPV6_TCP |
-			     IWL_RSS_HASH_TYPE_IPV6_UDP |
-			     IWL_RSS_HASH_TYPE_IPV6_PAYLOAD,
+		.hash_mask = BIT(IWL_RSS_HASH_TYPE_IPV4_TCP) |
+			     BIT(IWL_RSS_HASH_TYPE_IPV4_UDP) |
+			     BIT(IWL_RSS_HASH_TYPE_IPV4_PAYLOAD) |
+			     BIT(IWL_RSS_HASH_TYPE_IPV6_TCP) |
+			     BIT(IWL_RSS_HASH_TYPE_IPV6_UDP) |
+			     BIT(IWL_RSS_HASH_TYPE_IPV6_PAYLOAD),
 	};
 
 	if (mvm->trans->num_rx_queues == 1)
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 58/271 staging: most: cdev: add missing check for cdev_add failure

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 5ae890780e1b4d08f2c0c5d4ea96fc3928fc0ee9 ]

Currently the call to cdev_add is missing a check for failure. Fix this by checking for failure and exiting via a new error path that ensures the allocated comp_channel struct is kfree'd.

Detected by CoverityScan, CID#1462359 ("Unchecked return value")

Fixes 9bc79bbcd0c5 ("Staging: most: add MOST driver's aim-cdev module")
---
 drivers/staging/most/aim-cdev/cdev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/staging/most/aim-cdev/cdev.c +4 -1
index 7f51024dc5ebb..e87b9ed4f37de 100644
@@ -451,7 +451,9 @@ static int aim_probe(struct most_interface *iface, int channel_id,
 	c->devno = MKDEV(major, current_minor);
 	cdev_init(&c->cdev, &channel_fops);
 	c->cdev.owner = THIS_MODULE;
-	cdev_add(&c->cdev, c->devno, 1);
+	retval = cdev_add(&c->cdev, c->devno, 1);
+	if (retval < 0)
+		goto err_free_c;
 	c->iface = iface;
 	c->cfg = cfg;
 	c->channel_id = channel_id;
@@ -487,6 +489,7 @@ error_create_device:
 	list_del(&c->list);
 error_alloc_kfifo:
 	cdev_del(&c->cdev);
+err_free_c:
 	kfree(c);
 error_alloc_channel:
 	ida_simple_remove(&minor_id, current_minor);
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 59/271 rtc: ds1672: fix unintended sign extension

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit f0c04c276739ed8acbb41b4868e942a55b128dca ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#138801 ("Unintended sign extension")

Fixes edf1aaa31fc5 ("[PATCH] RTC subsystem: DS1672 driver")
---
 drivers/rtc/rtc-ds1672.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/rtc/rtc-ds1672.c +2 -1
index 5c18ac7394c42..c911f2db0af5e 100644
@@ -58,7 +58,8 @@ static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 		"%s: raw read data - counters=%02x,%02x,%02x,%02x\n",
 		__func__, buf[0], buf[1], buf[2], buf[3]);
 
-	time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	time = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+	       (buf[1] << 8) | buf[0];
 
 	rtc_time_to_tm(time, tm);
 
Signature · 1 line
2.20.1
author maintainer
#60 lore raw

PATCH 60/271 thermal: mediatek: fix register index error

In reply to Greg Kroah-Hartman

From: Michael Kao <[email protected]>

[ Upstream commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 ]

The index of msr and adcpnp should match the sensor which belongs to the selected bank in the for loop.

Fixes b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
---
 drivers/thermal/mtk_thermal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/thermal/mtk_thermal.c +4 -2
index 34169c32d4956..ea9558679634b 100644
@@ -348,7 +348,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	u32 raw;
 
 	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-		raw = readl(mt->thermal_base + conf->msr[i]);
+		raw = readl(mt->thermal_base +
+			    conf->msr[conf->bank_data[bank->id].sensors[i]]);
 
 		temp = raw_to_mcelsius(mt,
 				       conf->bank_data[bank->id].sensors[i],
@@ -485,7 +486,8 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
 	for (i = 0; i < conf->bank_data[num].num_sensors; i++)
 		writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-		       mt->thermal_base + conf->adcpnp[i]);
+		       mt->thermal_base +
+		       conf->adcpnp[conf->bank_data[num].sensors[i]]);
 
 	writel((1 << conf->bank_data[num].num_sensors) - 1,
 	       mt->thermal_base + TEMP_MONCTL0);
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 61/271 net: phy: fixed_phy: Fix fixed_phy not checking GPIO

In reply to Greg Kroah-Hartman

From: Moritz Fischer <[email protected]>

[ Upstream commit 8f289805616e81f7c1690931aa8a586c76f4fa88 ]

Fix fixed_phy not checking GPIO if no link_update callback is registered.

In the original version all users registered a link_update callback so the issue was masked.

Fixes a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.")
---
 drivers/net/phy/fixed_phy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/phy/fixed_phy.c +3 -3
index eb51672106811..3ab2eb677a599 100644
@@ -67,11 +67,11 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
 			do {
 				s = read_seqcount_begin(&fp->seqcount);
 				/* Issue callback if user registered it. */
-				if (fp->link_update) {
+				if (fp->link_update)
 					fp->link_update(fp->phydev->attached_dev,
 							&fp->status);
-					fixed_phy_update(fp);
-				}
+				/* Check the GPIO for change in status */
+				fixed_phy_update(fp);
 				state = fp->status;
 			} while (read_seqcount_retry(&fp->seqcount, s));
 
Signature · 1 line
2.20.1
author maintainer
#62 lore raw

PATCH 62/271 rtc: 88pm860x: fix unintended sign extension

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit dc9e47160626cdb58d5c39a4f43dcfdb27a5c004 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes 008b30408c40 ("mfd: Add rtc support to 88pm860x")
---
 drivers/rtc/rtc-88pm860x.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/rtc/rtc-88pm860x.c +14 -7
index 166faae3a59cd..7d3e5168fcefc 100644
@@ -115,11 +115,13 @@ static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -145,7 +147,8 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	base = ticks - data;
 	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -170,10 +173,12 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -198,11 +203,13 @@ static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 63/271 rtc: 88pm80x: fix unintended sign extension

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit fb0b322537a831b5b0cb948c56f8f958ce493d3a ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension")

Fixes 2985c29c1964 ("rtc: Add rtc support to 88PM80X PMIC")
---
 drivers/rtc/rtc-88pm80x.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/rtc/rtc-88pm80x.c +14 -7
index 466bf7f9a285a..7da2a1fb50f89 100644
@@ -116,12 +116,14 @@ static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	unsigned char buf[4];
 	unsigned long ticks, base, data;
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
-	base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
 
 	/* load 32-bit read-only counter */
 	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -144,7 +146,8 @@ static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* load 32-bit read-only counter */
 	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	base = ticks - data;
 	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -165,11 +168,13 @@ static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	int ret;
 
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
-	base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
 
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -192,12 +197,14 @@ static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0);
 
 	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
-	base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
 
 	/* load 32-bit read-only counter */
 	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 64/271 rtc: pm8xxx: fix unintended sign extension

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit e42280886018c6f77f0a90190f7cba344b0df3e0 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#1309693 ("Unintended sign extension")

Fixes 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
---
 drivers/rtc/rtc-pm8xxx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/rtc/rtc-pm8xxx.c +4 -2
index fac835530671f..a1b4b0ed1f196 100644
@@ -186,7 +186,8 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		}
 	}
 
-	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+	       ((unsigned long)value[3] << 24);
 
 	rtc_time_to_tm(secs, tm);
 
@@ -267,7 +268,8 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 		return rc;
 	}
 
-	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+	       ((unsigned long)value[3] << 24);
 
 	rtc_time_to_tm(secs, &alarm->time);
 
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 65/271 fbdev: chipsfb: remove set but not used variable size

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 8e71fa5e4d86bedfd26df85381d65d6b4c860020 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/video/fbdev/chipsfb.c: In function 'chipsfb_pci_init':
drivers/video/fbdev/chipsfb.c:352:22: warning:
variable 'size' set but not used [-Wunused-but-set-variable]

Fixes 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK").
Cc Daniel Vetter <[email protected]>
Cc Christophe Leroy <[email protected]>
[b.zolnierkie: minor commit summary and description fixups]
---
 drivers/video/fbdev/chipsfb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/video/fbdev/chipsfb.c +1 -2
index 59abdc6a97f66..314b7eceb81c5 100644
@@ -350,7 +350,7 @@ static void init_chips(struct fb_info *p, unsigned long addr)
 static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
 {
 	struct fb_info *p;
-	unsigned long addr, size;
+	unsigned long addr;
 	unsigned short cmd;
 	int rc = -ENODEV;
 
@@ -362,7 +362,6 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
 	if ((dp->resource[0].flags & IORESOURCE_MEM) == 0)
 		goto err_disable;
 	addr = pci_resource_start(dp, 0);
-	size = pci_resource_len(dp, 0);
 	if (addr == 0)
 		goto err_disable;
 
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 66/271 iw_cxgb4: use tos when importing the endpoint

In reply to Greg Kroah-Hartman

From: Steve Wise <[email protected]>

[ Upstream commit cb3ba0bde881f0cb7e3945d2a266901e2bd18c92 ]

import_ep() is passed the correct tos, but doesn't use it correctly.

Fixes ac8e4c69a021 ("cxgb4/iw_cxgb4: TOS support")
---
 drivers/infiniband/hw/cxgb4/cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/cxgb4/cm.c +1 -1
index 605d50ad123cc..a29fe11d688a5 100644
@@ -2044,7 +2044,7 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip,
 	} else {
 		pdev = get_real_dev(n->dev);
 		ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
-					n, pdev, 0);
+					n, pdev, rt_tos2priority(tos));
 		if (!ep->l2t)
 			goto out;
 		ep->mtu = dst_mtu(dst);
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 67/271 iw_cxgb4: use tos when finding ipv6 routes

In reply to Greg Kroah-Hartman

From: Steve Wise <[email protected]>

[ Upstream commit c8a7eb554a83214c3d8ee5cb322da8c72810d2dc ]

When IPv6 support was added, the correct tos was not passed to cxgb_find_route6(). This potentially results in the wrong route entry.

Fixes 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
---
 drivers/infiniband/hw/cxgb4/cm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/infiniband/hw/cxgb4/cm.c +3 -2
index a29fe11d688a5..a04a53acb24ff 100644
@@ -2135,7 +2135,8 @@ static int c4iw_reconnect(struct c4iw_ep *ep)
 					   laddr6->sin6_addr.s6_addr,
 					   raddr6->sin6_addr.s6_addr,
 					   laddr6->sin6_port,
-					   raddr6->sin6_port, 0,
+					   raddr6->sin6_port,
+					   ep->com.cm_id->tos,
 					   raddr6->sin6_scope_id);
 		iptype = 6;
 		ra = (__u8 *)&raddr6->sin6_addr;
@@ -3278,7 +3279,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 					   laddr6->sin6_addr.s6_addr,
 					   raddr6->sin6_addr.s6_addr,
 					   laddr6->sin6_port,
-					   raddr6->sin6_port, 0,
+					   raddr6->sin6_port, cm_id->tos,
 					   raddr6->sin6_scope_id);
 	}
 	if (!ep->dst) {
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 68/271 pinctrl: sh-pfc: emev2: Add missing pinmux functions

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 1ecd8c9cb899ae277e6986ae134635cb1a50f5de ]

The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected.

Fixes 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support")
---
 drivers/pinctrl/sh-pfc/pfc-emev2.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
drivers/pinctrl/sh-pfc/pfc-emev2.c +20 -0
index 1cbbe04d7df65..eafd8edbcbe95 100644
@@ -1263,6 +1263,14 @@ static const char * const dtv_groups[] = {
 	"dtv_b",
 };
 
+static const char * const err_rst_reqb_groups[] = {
+	"err_rst_reqb",
+};
+
+static const char * const ext_clki_groups[] = {
+	"ext_clki",
+};
+
 static const char * const iic0_groups[] = {
 	"iic0",
 };
@@ -1285,6 +1293,10 @@ static const char * const lcd_groups[] = {
 	"yuv3",
 };
 
+static const char * const lowpwr_groups[] = {
+	"lowpwr",
+};
+
 static const char * const ntsc_groups[] = {
 	"ntsc_clk",
 	"ntsc_data",
@@ -1298,6 +1310,10 @@ static const char * const pwm1_groups[] = {
 	"pwm1",
 };
 
+static const char * const ref_clko_groups[] = {
+	"ref_clko",
+};
+
 static const char * const sd_groups[] = {
 	"sd_cki",
 };
@@ -1391,13 +1407,17 @@ static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(cam),
 	SH_PFC_FUNCTION(cf),
 	SH_PFC_FUNCTION(dtv),
+	SH_PFC_FUNCTION(err_rst_reqb),
+	SH_PFC_FUNCTION(ext_clki),
 	SH_PFC_FUNCTION(iic0),
 	SH_PFC_FUNCTION(iic1),
 	SH_PFC_FUNCTION(jtag),
 	SH_PFC_FUNCTION(lcd),
+	SH_PFC_FUNCTION(lowpwr),
 	SH_PFC_FUNCTION(ntsc),
 	SH_PFC_FUNCTION(pwm0),
 	SH_PFC_FUNCTION(pwm1),
+	SH_PFC_FUNCTION(ref_clko),
 	SH_PFC_FUNCTION(sd),
 	SH_PFC_FUNCTION(sdi0),
 	SH_PFC_FUNCTION(sdi1),
Signature · 1 line
2.20.1
author maintainer
#69 lore raw

PATCH 69/271 pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit a4b0350047f1b10207e25e72d7cd3f7826e93769 ]

The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected.

Fixes 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-r8a7791.c +1 -1
index 1e7f32b5dce8c..dd350e2961423 100644
@@ -5078,7 +5078,7 @@ static const char * const scifb2_groups[] = {
 	"scifb2_data_b",
 	"scifb2_clk_b",
 	"scifb2_ctrl_b",
-	"scifb0_data_c",
+	"scifb2_data_c",
 	"scifb2_clk_c",
 	"scifb2_data_d",
 };
Signature · 1 line
2.20.1
author maintainer
#70 lore raw

PATCH 70/271 pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit b9fd50488b4939ce5b3a026d29e752e17c2d1800 ]

The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected.

Fixes 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups")
---
 drivers/pinctrl/sh-pfc/pfc-r8a7792.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/sh-pfc/pfc-r8a7792.c +1 -0
index 21badb6166b92..97998929db938 100644
@@ -1863,6 +1863,7 @@ static const char * const vin1_groups[] = {
 	"vin1_data8",
 	"vin1_data24_b",
 	"vin1_data20_b",
+	"vin1_data18_b",
 	"vin1_data16_b",
 	"vin1_sync",
 	"vin1_field",
Signature · 1 line
2.20.1
author maintainer
#71 lore raw

PATCH 71/271 pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 0e6e448bdcf896d001a289a6112a704542d51516 ]

There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group.

Fixes 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions")
---
 drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-sh73a0.c +2 -1
index f8fbedb46585d..6dca760f9f280 100644
@@ -3367,7 +3367,8 @@ static const char * const fsic_groups[] = {
 	"fsic_sclk_out",
 	"fsic_data_in",
 	"fsic_data_out",
-	"fsic_spdif",
+	"fsic_spdif_0",
+	"fsic_spdif_1",
 };
 
 static const char * const fsid_groups[] = {
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 72/271 usb: phy: twl6030-usb: fix possible use-after-free on remove

In reply to Greg Kroah-Hartman

From: Sven Van Asbroeck <[email protected]>

[ Upstream commit 5895d311d28f2605e2f71c1a3e043ed38f3ac9d2 ]

In remove(), use cancel_delayed_work_sync() to cancel the delayed work. Otherwise there's a chance that this work will continue to run until after the device has been removed.

This issue was detected with the help of Coccinelle.

Cc Tony Lindgren <[email protected]>
Cc Bin Liu <[email protected]>
Fixes b6a619a883c3 ("usb: phy: Check initial state for twl6030")
---
 drivers/usb/phy/phy-twl6030-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/phy/phy-twl6030-usb.c +1 -1
index a72e8d670adc8..cf0b67433ac95 100644
@@ -422,7 +422,7 @@ static int twl6030_usb_remove(struct platform_device *pdev)
 {
 	struct twl6030_usb *twl = platform_get_drvdata(pdev);
 
-	cancel_delayed_work(&twl->get_status_work);
+	cancel_delayed_work_sync(&twl->get_status_work);
 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
 		REG_INT_MSK_LINE_C);
 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
Signature · 1 line
2.20.1
author maintainer
#73 lore raw

PATCH 73/271 block: dont use bio->bi_vcnt to figure out segment number

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

[ Upstream commit 1a67356e9a4829da2935dd338630a550c59c8489 ]

It is wrong to use bio->bi_vcnt to figure out how many segments there are in the bio even though CLONED flag isn't set on this bio, because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't cause any performance loss now because the physical segment number is figured out in blk_queue_split() and BIO_SEG_VALID is set meantime since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting").

Fixes 76d8137a3113 ("blk-merge: recaculate segment if it isn't less than max segments")
---
 block/blk-merge.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
block/blk-merge.c +1 -7
index 2642e5fc8b69a..66795cca662a3 100644
@@ -305,13 +305,7 @@ void blk_recalc_rq_segments(struct request *rq)
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
 {
-	unsigned short seg_cnt;
-
-	/* estimate segment number by bi_vcnt for non-cloned bio */
-	if (bio_flagged(bio, BIO_CLONED))
-		seg_cnt = bio_segments(bio);
-	else
-		seg_cnt = bio->bi_vcnt;
+	unsigned short seg_cnt = bio_segments(bio);
 
 	if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags) &&
 			(seg_cnt < queue_max_segments(q)))
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 74/271 keys: Timestamp new keys

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 7c1857bdbdf1e4c541e45eab477ee23ed4333ea4 ]

Set the timestamp on new keys rather than leaving it unset.

Fixes 31d5a79d7f3d ("KEYS: Do LRU discard in full keyrings")
---
 security/keys/key.c | 1 +
 1 file changed, 1 insertion(+)
security/keys/key.c +1 -0
index 7276d1a009d49..280b4feccdc00 100644
@@ -296,6 +296,7 @@ struct key *key_alloc(struct key_type *type, const char *desc,
 	key->gid = gid;
 	key->perm = perm;
 	key->restrict_link = restrict_link;
+	key->last_used_at = ktime_get_real_seconds();
 
 	if (!(flags & KEY_ALLOC_NOT_IN_QUOTA))
 		key->flags |= 1 << KEY_FLAG_IN_QUOTA;
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 75/271 vfio_pci: Enable memory accesses before calling pci_map_rom

In reply to Greg Kroah-Hartman

From: Eric Auger <[email protected]>

[ Upstream commit 0cfd027be1d6def4a462cdc180c055143af24069 ]

pci_map_rom/pci_get_rom_size() performs memory access in the ROM. In case the Memory Space accesses were disabled, readw() is likely to trigger a synchronous external abort on some platforms.

In case memory accesses were disabled, re-enable them before the call and disable them back again just after.

Fixes 89e1f7d4c66d ("vfio: Add PCI device driver")
---
 drivers/vfio/pci/vfio_pci.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
drivers/vfio/pci/vfio_pci.c +14 -5
index da3f0ed18c769..c94167d871789 100644
@@ -729,6 +729,7 @@ static long vfio_pci_ioctl(void *device_data,
 		{
 			void __iomem *io;
 			size_t size;
+			u16 orig_cmd;
 
 			info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
 			info.flags = 0;
@@ -744,15 +745,23 @@ static long vfio_pci_ioctl(void *device_data,
 					break;
 			}
 
-			/* Is it really there? */
+			/*
+			 * Is it really there?  Enable memory decode for
+			 * implicit access in pci_map_rom().
+			 */
+			pci_read_config_word(pdev, PCI_COMMAND, &orig_cmd);
+			pci_write_config_word(pdev, PCI_COMMAND,
+					      orig_cmd | PCI_COMMAND_MEMORY);
+
 			io = pci_map_rom(pdev, &size);
-			if (!io || !size) {
+			if (io) {
+				info.flags = VFIO_REGION_INFO_FLAG_READ;
+				pci_unmap_rom(pdev, io);
+			} else {
 				info.size = 0;
-				break;
 			}
-			pci_unmap_rom(pdev, io);
 
-			info.flags = VFIO_REGION_INFO_FLAG_READ;
+			pci_write_config_word(pdev, PCI_COMMAND, orig_cmd);
 			break;
 		}
 		case VFIO_PCI_VGA_REGION_INDEX:
Signature · 1 line
2.20.1
author maintainer
#76 lore raw

PATCH 76/271 dmaengine: mv_xor: Use correct device for DMA API

In reply to Greg Kroah-Hartman

From: Robin Murphy <[email protected]>

[ Upstream commit 3e5daee5ecf314da33a890fabaa2404244cd2a36 ]

Using dma_dev->dev for mappings before it's assigned with the correct device is unlikely to work as expected, and with future dma-direct changes, passing a NULL device may end up crashing entirely. I don't know enough about this hardware or the mv_xor_prep_dma_interrupt() operation to implement the appropriate error-handling logic that would have revealed those dma_map_single() calls failing on arm64 for as long as the driver has been enabled there, but moving the assignment earlier will at least make the current code operate as intended.

---
 drivers/dma/mv_xor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/mv_xor.c +1 -1
index 23f75285a4d9c..5d524f29c5f11 100644
@@ -1044,6 +1044,7 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 		mv_chan->op_in_desc = XOR_MODE_IN_DESC;
 
 	dma_dev = &mv_chan->dmadev;
+	dma_dev->dev = &pdev->dev;
 	mv_chan->xordev = xordev;
 
 	/*
@@ -1076,7 +1077,6 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 	dma_dev->device_free_chan_resources = mv_xor_free_chan_resources;
 	dma_dev->device_tx_status = mv_xor_status;
 	dma_dev->device_issue_pending = mv_xor_issue_pending;
-	dma_dev->dev = &pdev->dev;
 
 	/* set prep routines based on capability */
 	if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 77/271 cdc-wdm: pass return value of recover_from_urb_loss

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 0742a338f5b3446a26de551ad8273fb41b2787f2 ]

'rv' is the correct return value, pass it upstream instead of 0

Fixes 17d80d562fd7 ("USB: autosuspend for cdc-wdm")
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/class/cdc-wdm.c +1 -1
index 217a479165e03..09337a973335c 100644
@@ -1098,7 +1098,7 @@ static int wdm_post_reset(struct usb_interface *intf)
 	rv = recover_from_urb_loss(desc);
 	mutex_unlock(&desc->wlock);
 	mutex_unlock(&desc->rlock);
-	return 0;
+	return rv;
 }
 
 static struct usb_driver wdm_driver = {
Signature · 1 line
2.20.1
author maintainer
#78 lore raw

PATCH 78/271 regulator: pv88060: Fix array out-of-bounds access

In reply to Greg Kroah-Hartman

From: Axel Lin <[email protected]>

[ Upstream commit 7cd415f875591bc66c5ecb49bf84ef97e80d7b0e ]

Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1.

Fixes f307a7e9b7af ("regulator: pv88060: new regulator driver")
---
 drivers/regulator/pv88060-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/pv88060-regulator.c +1 -1
index 6c4afc73ecac3..d229245d2b5e8 100644
@@ -135,7 +135,7 @@ static int pv88060_set_current_limit(struct regulator_dev *rdev, int min,
 	int i;
 
 	/* search for closest to maximum */
-	for (i = info->n_current_limits; i >= 0; i--) {
+	for (i = info->n_current_limits - 1; i >= 0; i--) {
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 			return regmap_update_bits(rdev->regmap,
Signature · 1 line
2.20.1
author maintainer
#79 lore raw

PATCH 79/271 regulator: pv88080: Fix array out-of-bounds access

In reply to Greg Kroah-Hartman

From: Axel Lin <[email protected]>

[ Upstream commit 3c413f594c4f9df40061445667ca11a12bc8ee34 ]

Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1.

Fixes 99cf3af5e2d5 ("regulator: pv88080: new regulator driver")
---
 drivers/regulator/pv88080-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/pv88080-regulator.c +1 -1
index 954a20eeb26f8..a40ecfb772107 100644
@@ -279,7 +279,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
 	int i;
 
 	/* search for closest to maximum */
-	for (i = info->n_current_limits; i >= 0; i--) {
+	for (i = info->n_current_limits - 1; i >= 0; i--) {
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 				return regmap_update_bits(rdev->regmap,
Signature · 1 line
2.20.1
author maintainer
#80 lore raw

PATCH 80/271 regulator: pv88090: Fix array out-of-bounds access

In reply to Greg Kroah-Hartman

From: Axel Lin <[email protected]>

[ Upstream commit a5455c9159414748bed4678184bf69989a4f7ba3 ]

Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1.

Fixes c90456e36d9c ("regulator: pv88090: new regulator driver")
---
 drivers/regulator/pv88090-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/pv88090-regulator.c +1 -1
index 4216411753529..789652c9b0142 100644
@@ -157,7 +157,7 @@ static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
 	int i;
 
 	/* search for closest to maximum */
-	for (i = info->n_current_limits; i >= 0; i--) {
+	for (i = info->n_current_limits - 1; i >= 0; i--) {
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 			return regmap_update_bits(rdev->regmap,
Signature · 1 line
2.20.1
author maintainer
#81 lore raw

PATCH 81/271 net: dsa: qca8k: Enable delay for RGMII_ID mode

In reply to Greg Kroah-Hartman

From: Vinod Koul <[email protected]>

[ Upstream commit a968b5e9d5879f9535d6099505f9e14abcafb623 ]

RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode.

Fixes 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode")
---
 drivers/net/dsa/qca8k.c | 12 ++++++++++++
 drivers/net/dsa/qca8k.h |  1 +
 2 files changed, 13 insertions(+)
drivers/net/dsa/qca8k.c +12 -0
index ebfbaf8597f40..3bbe85aae49bb 100644
@@ -460,6 +460,18 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
 		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
 			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
 		break;
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		/* RGMII_ID needs internal delay. This is enabled through
+		 * PORT5_PAD_CTRL for all ports, rather than individual port
+		 * registers
+		 */
+		qca8k_write(priv, reg,
+			    QCA8K_PORT_PAD_RGMII_EN |
+			    QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) |
+			    QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY));
+		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+		break;
 	case PHY_INTERFACE_MODE_SGMII:
 		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
 		break;
drivers/net/dsa/qca8k.h +1 -0
index 9c22bc3210cdf..db95168ca111d 100644
@@ -40,6 +40,7 @@
 						((0x8 + (x & 0x3)) << 22)
 #define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		\
 						((0x10 + (x & 0x3)) << 20)
+#define   QCA8K_MAX_DELAY				3
 #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
 #define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
 #define QCA8K_REG_MODULE_EN				0x030
Signature · 1 line
2.20.1
author maintainer
#82 lore raw

PATCH 82/271 drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 13649101a25c53c87f4ab98a076dfe61f3636ab1 ]

Currently, the expression for calculating RON is always going to result in zero no matter the value of ram->mr[1] because the ! operator has higher precedence than the shift >> operator. I believe the missing parentheses around the expression before appying the ! operator will result in the desired result.

[ Note, not tested ]

Detected by CoveritScan, CID#1324005 ("Operands don't affect result")

Fixes c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
---
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/gddr3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nvkm/subdev/fb/gddr3.c +1 -1
index 60ece0a8a2e1b..1d2d6bae73cd1 100644
@@ -87,7 +87,7 @@ nvkm_gddr3_calc(struct nvkm_ram *ram)
 		WR  = (ram->next->bios.timing[2] & 0x007f0000) >> 16;
 		/* XXX: Get these values from the VBIOS instead */
 		DLL = !(ram->mr[1] & 0x1);
-		RON = !(ram->mr[1] & 0x300) >> 8;
+		RON = !((ram->mr[1] & 0x300) >> 8);
 		break;
 	default:
 		return -ENOSYS;
Signature · 1 line
2.20.1
author maintainer
#83 lore raw

PATCH 83/271 drm/nouveau/pmu: dont print reply values if exec is false

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit b1d03fc36ec9834465a08c275c8d563e07f6f6bf ]

Currently the uninitialized values in the array reply are printed out when exec is false and nvkm_pmu_send has not updated the array. Avoid confusion by only dumping out these values if they have been actually updated.

Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")

Fixes ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)")
---
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/memx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/nouveau/nvkm/subdev/pmu/memx.c +2 -2
index e6f74168238c7..2ef9e942f43a2 100644
@@ -87,10 +87,10 @@ nvkm_memx_fini(struct nvkm_memx **pmemx, bool exec)
 	if (exec) {
 		nvkm_pmu_send(pmu, reply, PROC_MEMX, MEMX_MSG_EXEC,
 			      memx->base, finish);
+		nvkm_debug(subdev, "Exec took %uns, PMU_IN %08x\n",
+			   reply[0], reply[1]);
 	}
 
-	nvkm_debug(subdev, "Exec took %uns, PMU_IN %08x\n",
-		   reply[0], reply[1]);
 	kfree(memx);
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 84/271 ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 8d1667200850f8753c0265fa4bd25c9a6e5f94ce ]

The apq8016 driver leaves the of-node refcount at aborting from the loop of for_each_child_of_node() in the error path. Not only the iterator node of for_each_child_of_node(), the children nodes referred from it for codec and cpu have to be properly unreferenced.

Fixes bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support")
Cc Patrick Lai <[email protected]>
Cc Banajit Goswami <[email protected]>
---
 sound/soc/qcom/apq8016_sbc.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)
sound/soc/qcom/apq8016_sbc.c +16 -5
index 07f91e918b234..754742018515a 100644
@@ -114,13 +114,15 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 
 		if (!cpu || !codec) {
 			dev_err(dev, "Can't find cpu/codec DT node\n");
-			return ERR_PTR(-EINVAL);
+			ret = -EINVAL;
+			goto error;
 		}
 
 		link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0);
 		if (!link->cpu_of_node) {
 			dev_err(card->dev, "error getting cpu phandle\n");
-			return ERR_PTR(-EINVAL);
+			ret = -EINVAL;
+			goto error;
 		}
 
 		link->codec_of_node = of_parse_phandle(codec, "sound-dai", 0);
@@ -132,28 +134,37 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 		ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name);
 		if (ret) {
 			dev_err(card->dev, "error getting cpu dai name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		ret = snd_soc_of_get_dai_name(codec, &link->codec_dai_name);
 		if (ret) {
 			dev_err(card->dev, "error getting codec dai name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		link->platform_of_node = link->cpu_of_node;
 		ret = of_property_read_string(np, "link-name", &link->name);
 		if (ret) {
 			dev_err(card->dev, "error getting codec dai_link name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		link->stream_name = link->name;
 		link->init = apq8016_sbc_dai_init;
 		link++;
+
+		of_node_put(cpu);
+		of_node_put(codec);
 	}
 
 	return data;
+
+ error:
+	of_node_put(np);
+	of_node_put(cpu);
+	of_node_put(codec);
+	return ERR_PTR(ret);
 }
 
 static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
Signature · 1 line
2.20.1
author maintainer
#85 lore raw

PATCH 85/271 fs/nfs: Fix nfs_parse_devname to not modify its argument

In reply to Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 40cc394be1aa18848b8757e03bd8ed23281f572e ]

In the rare and unsupported case of a hostname list nfs_parse_devname will modify dev_name. There is no need to modify dev_name as the all that is being computed is the length of the hostname, so the computed length can just be shorted.

Fixes dc04589827f7 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3")
---
 fs/nfs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/nfs/super.c +1 -1
index 42c31587a936c..4c21e572f2d9e 100644
@@ -1928,7 +1928,7 @@ static int nfs_parse_devname(const char *dev_name,
 		/* kill possible hostname list: not supported */
 		comma = strchr(dev_name, ',');
 		if (comma != NULL && comma < end)
-			*comma = 0;
+			len = comma - dev_name;
 	}
 
 	if (len > maxnamlen)
Signature · 1 line
2.20.1
author maintainer
#86 lore raw

PATCH 86/271 NFS: Fix a soft lockup in the delegation recovery code

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 6f9449be53f3ce383caed797708b332ede8d952c ]

Fix a soft lockup when NFS client delegation recovery is attempted but the inode is in the process of being freed. When the igrab(inode) call fails, and we have to restart the recovery process, we need to ensure that we won't attempt to recover the same delegation again.

Fixes 45870d6909d5a ("NFSv4.1: Test delegation stateids when server...")
---
 fs/nfs/delegation.c | 20 ++++++++++++--------
 fs/nfs/delegation.h |  1 +
 2 files changed, 13 insertions(+), 8 deletions(-)
fs/nfs/delegation.c +12 -8
index 9a8830a0f31f9..014039618cff0 100644
@@ -234,6 +234,8 @@ static struct inode *nfs_delegation_grab_inode(struct nfs_delegation *delegation
 	spin_lock(&delegation->lock);
 	if (delegation->inode != NULL)
 		inode = igrab(delegation->inode);
+	if (!inode)
+		set_bit(NFS_DELEGATION_INODE_FREEING, &delegation->flags);
 	spin_unlock(&delegation->lock);
 	return inode;
 }
@@ -867,10 +869,11 @@ restart:
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
 		list_for_each_entry_rcu(delegation, &server->delegations,
 								super_list) {
-			if (test_bit(NFS_DELEGATION_RETURNING,
-						&delegation->flags))
-				continue;
-			if (test_bit(NFS_DELEGATION_NEED_RECLAIM,
+			if (test_bit(NFS_DELEGATION_INODE_FREEING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_RETURNING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_NEED_RECLAIM,
 						&delegation->flags) == 0)
 				continue;
 			if (!nfs_sb_active(server->super))
@@ -975,10 +978,11 @@ restart:
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
 		list_for_each_entry_rcu(delegation, &server->delegations,
 								super_list) {
-			if (test_bit(NFS_DELEGATION_RETURNING,
-						&delegation->flags))
-				continue;
-			if (test_bit(NFS_DELEGATION_TEST_EXPIRED,
+			if (test_bit(NFS_DELEGATION_INODE_FREEING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_RETURNING,
+						&delegation->flags) ||
+			    test_bit(NFS_DELEGATION_TEST_EXPIRED,
 						&delegation->flags) == 0)
 				continue;
 			if (!nfs_sb_active(server->super))
fs/nfs/delegation.h +1 -0
index 2c6cb7fb7d5ee..f72095bf9e107 100644
@@ -33,6 +33,7 @@ enum {
 	NFS_DELEGATION_RETURNING,
 	NFS_DELEGATION_REVOKED,
 	NFS_DELEGATION_TEST_EXPIRED,
+	NFS_DELEGATION_INODE_FREEING,
 };
 
 int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 87/271 clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit e7e7e0d7beafebd11b0c065cd5fbc1e5759c5aab ]

If the clock tree is not fully populated when the timer-sun5i init code is called, attempts to get the clock rate for the timer would fail and return 0.

Make the init code for both clock events and clocksource check the returned clock rate and fail gracefully if the result is 0, instead of causing a divide by 0 exception later on.

Fixes 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code")
---
 drivers/clocksource/timer-sun5i.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/clocksource/timer-sun5i.c +10 -0
index 4f87f3e76d832..c3e96de525a24 100644
@@ -201,6 +201,11 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	}
 
 	rate = clk_get_rate(clk);
+	if (!rate) {
+		pr_err("Couldn't get parent clock rate\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
 
 	cs->timer.base = base;
 	cs->timer.clk = clk;
@@ -274,6 +279,11 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	}
 
 	rate = clk_get_rate(clk);
+	if (!rate) {
+		pr_err("Couldn't get parent clock rate\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
 
 	ce->timer.base = base;
 	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 88/271 clocksource/drivers/exynos_mct: Fix error path in timer resources initialization

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit b9307420196009cdf18bad55e762ac49fb9a80f4 ]

While freeing interrupt handlers in error path, don't assume that all requested interrupts are per-processor interrupts and properly release standard interrupts too.

Fixes 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
---
 drivers/clocksource/exynos_mct.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/clocksource/exynos_mct.c +13 -1
index d32248e2ceab4..ae3cbaeffd9c5 100644
@@ -563,7 +563,19 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 	return 0;
 
 out_irq:
-	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	if (mct_int_type == MCT_INT_PPI) {
+		free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	} else {
+		for_each_possible_cpu(cpu) {
+			struct mct_clock_event_device *pcpu_mevt =
+				per_cpu_ptr(&percpu_mct_tick, cpu);
+
+			if (pcpu_mevt->evt.irq != -1) {
+				free_irq(pcpu_mevt->evt.irq, pcpu_mevt);
+				pcpu_mevt->evt.irq = -1;
+			}
+		}
+	}
 	return err;
 }
 
Signature · 1 line
2.20.1
author maintainer
#89 lore raw

PATCH 89/271 mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe

In reply to Greg Kroah-Hartman

From: Stefan Wahren <[email protected]>

[ Upstream commit 1e20186e706da8446f9435f2924cd65ab1397e73 ]

We need to handle mmc_of_parse() errors during probe otherwise the MMC driver could start without proper initialization (e.g. power sequence).

Fixes 476bf3d62d5c ("mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs")
---
 drivers/mmc/host/sdhci-brcmstb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-brcmstb.c +3 -1
index 159f6f64c68e7..ed6473731b458 100644
@@ -90,7 +90,9 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
 
 	sdhci_get_of_property(pdev);
-	mmc_of_parse(host->mmc);
+	res = mmc_of_parse(host->mmc);
+	if (res)
+		goto err;
 
 	/*
 	 * Supply the existing CAPS, but clear the UHS modes. This
Signature · 1 line
2.20.1
author maintainer
#90 lore raw

PATCH 90/271 ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit ca70ea43f80c98582f5ffbbd1e6f4da2742da0c4 ]

MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to perform low-level platform initialization. This results in a try to install HYP stubs for the second time for each CPU and results in false HYP/SVC mode mismatch detection. The HYP stubs are already installed at the beginning of the kernel initialization on the boot CPU (head.S) or in the secondary_startup() for other CPUs. To fix this issue MCPM code should use a cpu_resume() routine without HYP stubs installation.

This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid XU3/XU4/HC1 boards.

Fixes 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
---
 arch/arm/common/mcpm_entry.c   |  2 +-
 arch/arm/include/asm/suspend.h |  1 +
 arch/arm/kernel/sleep.S        | 12 ++++++++++++
 3 files changed, 14 insertions(+), 1 deletion(-)
arch/arm/common/mcpm_entry.c +1 -1
index a923524d10407..8617323eb2735 100644
@@ -379,7 +379,7 @@ static int __init nocache_trampoline(unsigned long _arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	phys_reset_t phys_reset;
 
-	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
 	setup_mm_for_reboot();
 
 	__mcpm_cpu_going_down(cpu, cluster);
arch/arm/include/asm/suspend.h +1 -0
index 6c7182f32cefe..e6c2f426f8c86 100644
@@ -7,6 +7,7 @@ struct sleep_save_sp {
 };
 
 extern void cpu_resume(void);
+extern void cpu_resume_no_hyp(void);
 extern void cpu_resume_arm(void);
 extern int cpu_suspend(unsigned long, int (*)(unsigned long));
 
arch/arm/kernel/sleep.S +12 -0
index 0f6c1000582c3..c8569390e7e7e 100644
@@ -119,6 +119,14 @@ ENDPROC(cpu_resume_after_mmu)
 	.text
 	.align
 
+#ifdef CONFIG_MCPM
+	.arm
+THUMB(	.thumb			)
+ENTRY(cpu_resume_no_hyp)
+ARM_BE8(setend be)			@ ensure we are in BE mode
+	b	no_hyp
+#endif
+
 #ifdef CONFIG_MMU
 	.arm
 ENTRY(cpu_resume_arm)
@@ -134,6 +142,7 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
 	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r1
+no_hyp:
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
@@ -162,6 +171,9 @@ ENDPROC(cpu_resume)
 
 #ifdef CONFIG_MMU
 ENDPROC(cpu_resume_arm)
+#endif
+#ifdef CONFIG_MCPM
+ENDPROC(cpu_resume_no_hyp)
 #endif
 
 	.align 2
Signature · 1 line
2.20.1
author maintainer
#91 lore raw

PATCH 91/271 ARM: 8848/1: virt: Align GIC version check with arm64 counterpart

In reply to Greg Kroah-Hartman

From: Vladimir Murzin <[email protected]>

[ Upstream commit 9db043d36bd379f4cc99054c079de0dabfc38d03 ]

arm64 has got relaxation on GIC version check at early boot stage due to update of the GIC architecture let's align ARM with that.

To help backports (even though the code was correct at the time of writing)

Fixes e59941b9b381 ("ARM: 8527/1: virt: enable GICv3 system registers")
---
 arch/arm/kernel/hyp-stub.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/kernel/hyp-stub.S +2 -2
index 15d073ae5da2a..f5e5e3e196592 100644
@@ -179,8 +179,8 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	@ Check whether GICv3 system registers are available
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
 	ubfx	r7, r7, #28, #4
-	cmp	r7, #1
-	bne	2f
+	teq	r7, #0
+	beq	2f
 
 	@ Enable system register accesses
 	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
Signature · 1 line
2.20.1
author maintainer
#92 lore raw

PATCH 92/271 regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uA

In reply to Greg Kroah-Hartman

From: Axel Lin <[email protected]>

[ Upstream commit c25d47888f0fb3d836d68322d4aea2caf31a75a6 ]

The wm831x_dcdc_ilim entries needs to be uA because it is used to compare with min_uA and max_uA.
While at it also make the array const and change to use unsigned int.

Fixes e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support")
---
 drivers/regulator/wm831x-dcdc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/wm831x-dcdc.c +2 -2
index 5a5bc4bb08d26..df591435d12a3 100644
@@ -327,8 +327,8 @@ static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
 }
 
 /* Current limit options */
-static u16 wm831x_dcdc_ilim[] = {
-	125, 250, 375, 500, 625, 750, 875, 1000
+static const unsigned int wm831x_dcdc_ilim[] = {
+	125000, 250000, 375000, 500000, 625000, 750000, 875000, 1000000
 };
 
 static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
Signature · 1 line
2.20.1
author maintainer
#93 lore raw

PATCH 93/271 nios2: ksyms: Add missing symbol exports

In reply to Greg Kroah-Hartman

From: Guenter Roeck <[email protected]>

[ Upstream commit 0f8ed994575429d6042cf5d7ef70081c94091587 ]

Building nios2:allmodconfig fails as follows (each symbol is only listed once).

ERROR: "__ashldi3" [drivers/md/dm-writecache.ko] undefined!
ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined!
ERROR: "__lshrdi3" [drivers/md/dm-zoned.ko] undefined!
ERROR: "flush_icache_range" [drivers/misc/lkdtm/lkdtm.ko] undefined!
ERROR: "empty_zero_page" [drivers/md/dm-mod.ko] undefined!

The problem is seen with gcc 7.3.0.

Export the missing symbols.

Fixes 2fc8483fdcde ("nios2: Build infrastructure")
---
 arch/nios2/kernel/nios2_ksyms.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
arch/nios2/kernel/nios2_ksyms.c +12 -0
index bf2f55d10a4d8..4e704046a150c 100644
@@ -9,12 +9,20 @@
 #include <linux/export.h>
 #include <linux/string.h>
 
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+
 /* string functions */
 
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memmove);
 
+/* memory management */
+
+EXPORT_SYMBOL(empty_zero_page);
+EXPORT_SYMBOL(flush_icache_range);
+
 /*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
@@ -31,3 +39,7 @@ DECLARE_EXPORT(__udivsi3);
 DECLARE_EXPORT(__umoddi3);
 DECLARE_EXPORT(__umodsi3);
 DECLARE_EXPORT(__muldi3);
+DECLARE_EXPORT(__ucmpdi2);
+DECLARE_EXPORT(__lshrdi3);
+DECLARE_EXPORT(__ashldi3);
+DECLARE_EXPORT(__ashrdi3);
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 94/271 scsi: megaraid_sas: reduce module load time

In reply to Greg Kroah-Hartman

From: Steve Sistare <[email protected]>

[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]

megaraid_sas takes 1+ seconds to load while waiting for firmware:

[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state

This is due to the following loop in megasas_transition_to_ready(), which waits a minimum of 1 second, even though the FW becomes ready in tens of millisecs:

        /*
         * The cur_state should not last for more than max_wait secs
         */
        for (i = 0; i < max_wait; i++) {
                ...
                msleep(1000);
        ...
        dev_info(&instance->pdev->dev, "FW now in Ready state\n");

This is a regression, caused by a change of the msleep granularity from 1 to 1000 due to concern about waiting too long on systems with coarse jiffies.

To fix, increase iterations and use msleep(20), which results in:

[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state
Fixes fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/megaraid/megaraid_sas_base.c +2 -2
index c5cc002dfdd5c..10ae624dd2662 100644
@@ -3694,12 +3694,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 		/*
 		 * The cur_state should not last for more than max_wait secs
 		 */
-		for (i = 0; i < max_wait; i++) {
+		for (i = 0; i < max_wait * 50; i++) {
 			curr_abs_state = instance->instancet->
 				read_fw_status_reg(instance->reg_set);
 
 			if (abs_state == curr_abs_state) {
-				msleep(1000);
+				msleep(20);
 			} else
 				break;
 		}
Signature · 1 line
2.20.1
author maintainer
#95 lore raw

PATCH 95/271 drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 5ac188b12e7cbdd92dee60877d1fac913fc1d074 ]

If riocm_get_channel() fails, then we should just return -EINVAL. Calling riocm_put_channel() will trigger a NULL dereference and generally we should call put() if the get() didn't succeed.

Fixes b6e8d4aa1110 ("rapidio: add RapidIO channelized messaging driver")
Cc Matt Porter <[email protected]>
Cc Alexandre Bounine <[email protected]>
---
 drivers/rapidio/rio_cm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/rapidio/rio_cm.c +3 -1
index ef989a15aefc4..b29fc258eeba4 100644
@@ -1215,7 +1215,9 @@ static int riocm_ch_listen(u16 ch_id)
 	riocm_debug(CHOP, "(ch_%d)", ch_id);
 
 	ch = riocm_get_channel(ch_id);
-	if (!ch || !riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN))
+	if (!ch)
+		return -EINVAL;
+	if (!riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN))
 		ret = -EINVAL;
 	riocm_put_channel(ch);
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#96 lore raw

PATCH 96/271 xen, cpu_hotplug: Prevent an out of bounds access

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 201676095dda7e5b31a5e1d116d10fc22985075e ]

The "cpu" variable comes from the sscanf() so Smatch marks it as untrusted data. We can't pass a higher value than "nr_cpu_ids" to cpu_possible() or it results in an out of bounds access.

Fixes d68d82afd4c8 ("xen: implement CPU hotplugging")
---
 drivers/xen/cpu_hotplug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/xen/cpu_hotplug.c +1 -1
index f4e59c445964d..17054d6954117 100644
@@ -53,7 +53,7 @@ static int vcpu_online(unsigned int cpu)
 }
 static void vcpu_hotplug(unsigned int cpu)
 {
-	if (!cpu_possible(cpu))
+	if (cpu >= nr_cpu_ids || !cpu_possible(cpu))
 		return;
 
 	switch (vcpu_online(cpu)) {
Signature · 1 line
2.20.1
author maintainer
#97 lore raw

PATCH 97/271 net: sh_eth: fix a missing check of of_get_phy_mode

In reply to Greg Kroah-Hartman

From: Kangjie Lu <[email protected]>

[ Upstream commit 035a14e71f27eefa50087963b94cbdb3580d08bf ]

of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails.

---
 drivers/net/ethernet/renesas/sh_eth.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/renesas/sh_eth.c +5 -1
index 49300194d3f9f..6f8d4810ce979 100644
@@ -2929,12 +2929,16 @@ static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
 	struct device_node *np = dev->of_node;
 	struct sh_eth_plat_data *pdata;
 	const char *mac_addr;
+	int ret;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
 
-	pdata->phy_interface = of_get_phy_mode(np);
+	ret = of_get_phy_mode(np);
+	if (ret < 0)
+		return NULL;
+	pdata->phy_interface = ret;
 
 	mac_addr = of_get_mac_address(np);
 	if (mac_addr)
Signature · 1 line
2.20.1
author maintainer
#98 lore raw

PATCH 98/271 media: ivtv: update *pos correctly in ivtv_read_pos()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit f8e579f3ca0973daef263f513da5edff520a6c0d ]

We had intended to update *pos, but the current code is a no-op.

Fixes 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
---
 drivers/media/pci/ivtv/ivtv-fileops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/ivtv/ivtv-fileops.c +1 -1
index c9bd018e53de6..e2b19c3eaa876 100644
@@ -420,7 +420,7 @@ static ssize_t ivtv_read_pos(struct ivtv_stream *s, char __user *ubuf, size_t co
 
 	IVTV_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc);
 	if (rc > 0)
-		pos += rc;
+		*pos += rc;
 	return rc;
 }
 
Signature · 1 line
2.20.1
author maintainer
#99 lore raw

PATCH 99/271 media: cx18: update *pos correctly in cx18_read_pos()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 7afb0df554292dca7568446f619965fb8153085d ]

We should be updating *pos. The current code is a no-op.

Fixes 1c1e45d17b66 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
---
 drivers/media/pci/cx18/cx18-fileops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/cx18/cx18-fileops.c +1 -1
index df837408efd59..0171dc5b8809e 100644
@@ -490,7 +490,7 @@ static ssize_t cx18_read_pos(struct cx18_stream *s, char __user *ubuf,
 
 	CX18_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc);
 	if (rc > 0)
-		pos += rc;
+		*pos += rc;
 	return rc;
 }
 
Signature · 1 line
2.20.1
author maintainer
#100 lore raw

PATCH 100/271 media: wl128x: Fix an error code in fm_download_firmware()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit ef4bb63dc1f7213c08e13f6943c69cd27f69e4a3 ]

We forgot to set "ret" on this error path.

Fixes e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
---
 drivers/media/radio/wl128x/fmdrv_common.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/media/radio/wl128x/fmdrv_common.c +3 -2
index c1457cf466981..db987dda356e0 100644
@@ -1278,8 +1278,9 @@ static int fm_download_firmware(struct fmdev *fmdev, const u8 *fw_name)
 
 		switch (action->type) {
 		case ACTION_SEND_COMMAND:	/* Send */
-			if (fmc_send_cmd(fmdev, 0, 0, action->data,
-						action->size, NULL, NULL))
+			ret = fmc_send_cmd(fmdev, 0, 0, action->data,
+					   action->size, NULL, NULL);
+			if (ret)
 				goto rel_fw;
 
 			cmd_cnt++;
Signature · 1 line
2.20.1
author maintainer
#101 lore raw

PATCH 101/271 media: cx23885: check allocation return

In reply to Greg Kroah-Hartman

From: Nicholas Mc Guire <[email protected]>

[ Upstream commit a3d7f22ef34ec4206b50ee121384d5c8bebd5591 ]

Checking of kmalloc() seems to have been committed - as cx23885_dvb_register() is checking for != 0 return, returning -ENOMEM should be fine here. While at it address the coccicheck suggestion to move to kmemdup rather than using kmalloc+memcpy.

Fixes 46b21bbaa8a8 ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2")
---
 drivers/media/pci/cx23885/cx23885-dvb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/media/pci/cx23885/cx23885-dvb.c +3 -2
index 818f3c2fc98d8..1d86e57f4d9fd 100644
@@ -1471,8 +1471,9 @@ static int dvb_register(struct cx23885_tsport *port)
 		if (fe0->dvb.frontend != NULL) {
 			struct i2c_adapter *tun_i2c;
 
-			fe0->dvb.frontend->sec_priv = kmalloc(sizeof(dib7000p_ops), GFP_KERNEL);
-			memcpy(fe0->dvb.frontend->sec_priv, &dib7000p_ops, sizeof(dib7000p_ops));
+			fe0->dvb.frontend->sec_priv = kmemdup(&dib7000p_ops, sizeof(dib7000p_ops), GFP_KERNEL);
+			if (!fe0->dvb.frontend->sec_priv)
+				return -ENOMEM;
 			tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);
 			if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))
 				return -ENODEV;
Signature · 1 line
2.20.1
author maintainer
#102 lore raw

PATCH 102/271 regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB

In reply to Greg Kroah-Hartman

From: Axel Lin <[email protected]>

[ Upstream commit e69b394703e032e56a140172440ec4f9890b536d ]

selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.

Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT

0000     1.35 0100     1.8  1000     2.3  1100     2.85
0001     1.5  0101     1.9  1001     2.4  1101     3.0
0010     1.6  0110     2.0  1010     2.5  1110     3.3
0011     1.7  0111     2.1  1011     2.6  1111     Not Used
Fixes d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
---
 drivers/regulator/tps65086-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/tps65086-regulator.c +2 -2
index 6dbf3cf3951e2..12d26261394f1 100644
@@ -89,8 +89,8 @@ static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
 static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
-	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xA, 100000),
-	REGULATOR_LINEAR_RANGE(2700000, 0xB, 0xD, 150000),
+	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000),
+	REGULATOR_LINEAR_RANGE(2850000, 0xC, 0xD, 150000),
 	REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
 };
 
Signature · 1 line
2.20.1
author maintainer
#103 lore raw

PATCH 103/271 jfs: fix bogus variable self-initialization

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit a5fdd713d256887b5f012608701149fa939e5645 ]

A statement was originally added in 2006 to shut up a gcc warning, now but now clang warns about it:

fs/jfs/jfs_txnmgr.c:1932:15: error: variable 'pxd' is uninitialized when used within its own initialization
[-Werror,-Wuninitialized]
pxd_t pxd = pxd; /* truncated extent of xad */
~~~ ^~~

Modern versions of gcc are fine without the silly assignment, so just drop it. Tested with gcc-4.6 (released 2011), 4.7, 4.8, and 4.9.

Fixes c9e3ad6021e5 ("JFS: Get rid of "may be used uninitialized" warnings")
---
 fs/jfs/jfs_txnmgr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/jfs/jfs_txnmgr.c +1 -2
index 4d973524c8879..224ef034004b7 100644
@@ -1928,8 +1928,7 @@ static void xtLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
 	 * header ?
 	 */
 	if (tlck->type & tlckTRUNCATE) {
-		/* This odd declaration suppresses a bogus gcc warning */
-		pxd_t pxd = pxd;	/* truncated extent of xad */
+		pxd_t pxd;	/* truncated extent of xad */
 		int twm;
 
 		/*
Signature · 1 line
2.20.1
author maintainer
#104 lore raw

PATCH 104/271 tipc: tipc clang warning

In reply to Greg Kroah-Hartman

From: Jon Maloy <[email protected]>

[ Upstream commit 737889efe9713a0f20a75fd0de952841d9275e6b ]

When checking the code with clang -Wsometimes-uninitialized we get the following warning:

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
      tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);

net/tipc/node.c:831:2: note: remove the 'if' if its condition is always true

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence this warning
struct tipc_media_addr *maddr;

We fix this by initializing 'maddr' to NULL. For the matter of clarity, we also test if 'xmitq' is non-empty before we use it and 'maddr' further down in the function. It will never happen that 'xmitq' is non- empty at the same time as 'maddr' is NULL, so this is a sufficient test.

Fixes 598411d70f85 ("tipc: make resetting of links non-atomic")
---
 net/tipc/node.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/tipc/node.c +4 -3
index db8fbc076e1a5..fe7b0ad1d6f32 100644
@@ -688,10 +688,10 @@ static void __tipc_node_link_down(struct tipc_node *n, int *bearer_id,
 static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete)
 {
 	struct tipc_link_entry *le = &n->links[bearer_id];
+	struct tipc_media_addr *maddr = NULL;
 	struct tipc_link *l = le->link;
-	struct tipc_media_addr *maddr;
-	struct sk_buff_head xmitq;
 	int old_bearer_id = bearer_id;
+	struct sk_buff_head xmitq;
 
 	if (!l)
 		return;
@@ -713,7 +713,8 @@ static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete)
 	tipc_node_write_unlock(n);
 	if (delete)
 		tipc_mon_remove_peer(n->net, n->addr, old_bearer_id);
-	tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);
+	if (!skb_queue_empty(&xmitq))
+		tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);
 	tipc_sk_rcv(n->net, &le->inputq);
 }
 
Signature · 1 line
2.20.1
author maintainer
#105 lore raw

PATCH 105/271 m68k: mac: Fix VIA timer counter accesses

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 0ca7ce7db771580433bf24454f7a1542bd326078 ]

This resolves some bugs that affect VIA timer counter accesses. Avoid lost interrupts caused by reading the counter low byte register. Make allowance for the fact that the counter will be decremented to 0xFFFF before being reloaded.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 arch/m68k/mac/via.c | 102 +++++++++++++++++++++++---------------------
 1 file changed, 53 insertions(+), 49 deletions(-)
arch/m68k/mac/via.c +53 -49
index 920ff63d4a81d..c27bf9a906be4 100644
@@ -53,16 +53,6 @@ static __u8 rbv_clear;
 
 static int gIER,gIFR,gBufA,gBufB;
 
-/*
- * Timer defs.
- */
-
-#define TICK_SIZE		10000
-#define MAC_CLOCK_TICK		(783300/HZ)		/* ticks per HZ */
-#define MAC_CLOCK_LOW		(MAC_CLOCK_TICK&0xFF)
-#define MAC_CLOCK_HIGH		(MAC_CLOCK_TICK>>8)
-
-
 /*
  * On Macs with a genuine VIA chip there is no way to mask an individual slot
  * interrupt. This limitation also seems to apply to VIA clone logic cores in
@@ -277,22 +267,6 @@ void __init via_init(void)
 	}
 }
 
-/*
- * Start the 100 Hz clock
- */
-
-void __init via_init_clock(irq_handler_t func)
-{
-	via1[vACR] |= 0x40;
-	via1[vT1LL] = MAC_CLOCK_LOW;
-	via1[vT1LH] = MAC_CLOCK_HIGH;
-	via1[vT1CL] = MAC_CLOCK_LOW;
-	via1[vT1CH] = MAC_CLOCK_HIGH;
-
-	if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
-		pr_err("Couldn't register %s interrupt\n", "timer");
-}
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -320,29 +294,6 @@ void via_debug_dump(void)
 	}
 }
 
-/*
- * This is always executed with interrupts disabled.
- *
- * TBI: get time offset between scheduling timer ticks
- */
-
-u32 mac_gettimeoffset(void)
-{
-	unsigned long ticks, offset = 0;
-
-	/* read VIA1 timer 2 current value */
-	ticks = via1[vT1CL] | (via1[vT1CH] << 8);
-	/* The probability of underflow is less than 2% */
-	if (ticks > MAC_CLOCK_TICK - MAC_CLOCK_TICK / 50)
-		/* Check for pending timer interrupt in VIA1 IFR */
-		if (via1[vIFR] & 0x40) offset = TICK_SIZE;
-
-	ticks = MAC_CLOCK_TICK - ticks;
-	ticks = ticks * 10000L / MAC_CLOCK_TICK;
-
-	return (ticks + offset) * 1000;
-}
-
 /*
  * Flush the L2 cache on Macs that have it by flipping
  * the system into 24-bit mode for an instant.
@@ -619,3 +570,56 @@ int via2_scsi_drq_pending(void)
 	return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ));
 }
 EXPORT_SYMBOL(via2_scsi_drq_pending);
+
+/* timer and clock source */
+
+#define VIA_CLOCK_FREQ     783360                /* VIA "phase 2" clock in Hz */
+#define VIA_TIMER_INTERVAL (1000000 / HZ)        /* microseconds per jiffy */
+#define VIA_TIMER_CYCLES   (VIA_CLOCK_FREQ / HZ) /* clock cycles per jiffy */
+
+#define VIA_TC             (VIA_TIMER_CYCLES - 2) /* including 0 and -1 */
+#define VIA_TC_LOW         (VIA_TC & 0xFF)
+#define VIA_TC_HIGH        (VIA_TC >> 8)
+
+void __init via_init_clock(irq_handler_t timer_routine)
+{
+	if (request_irq(IRQ_MAC_TIMER_1, timer_routine, 0, "timer", NULL)) {
+		pr_err("Couldn't register %s interrupt\n", "timer");
+		return;
+	}
+
+	via1[vT1LL] = VIA_TC_LOW;
+	via1[vT1LH] = VIA_TC_HIGH;
+	via1[vT1CL] = VIA_TC_LOW;
+	via1[vT1CH] = VIA_TC_HIGH;
+	via1[vACR] |= 0x40;
+}
+
+u32 mac_gettimeoffset(void)
+{
+	unsigned long flags;
+	u8 count_high;
+	u16 count, offset = 0;
+
+	/*
+	 * Timer counter wrap-around is detected with the timer interrupt flag
+	 * but reading the counter low byte (vT1CL) would reset the flag.
+	 * Also, accessing both counter registers is essentially a data race.
+	 * These problems are avoided by ignoring the low byte. Clock accuracy
+	 * is 256 times worse (error can reach 0.327 ms) but CPU overhead is
+	 * reduced by avoiding slow VIA register accesses.
+	 */
+
+	local_irq_save(flags);
+	count_high = via1[vT1CH];
+	if (count_high == 0xFF)
+		count_high = 0;
+	if (count_high > 0 && (via1[vIFR] & VIA_TIMER_1_INT))
+		offset = VIA_TIMER_CYCLES;
+	local_irq_restore(flags);
+
+	count = count_high << 8;
+	count = VIA_TIMER_CYCLES - count + offset;
+
+	return ((count * VIA_TIMER_INTERVAL) / VIA_TIMER_CYCLES) * 1000;
+}
Signature · 1 line
2.20.1
author maintainer
#106 lore raw

PATCH 106/271 ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 7f0d078667a494466991aa7133f49594f32ff6a2 ]

Commit 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") made the call to _enable() conditional based on no oh->rst_lines_cnt. This caused the return value to be potentially uninitialized. Curiously we see no compiler warnings for this, probably as this gets inlined.

We call _setup_reset() from _setup() and only _setup_postsetup() if the return value is zero. Currently the return value can be uninitialized for cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set.

Fixes 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior")
Cc Paul Walmsley <[email protected]>
Cc Tero Kristo <[email protected]>
---
 arch/arm/mach-omap2/omap_hwmod.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/omap_hwmod.c +1 -1
index bfc74954540ce..9421b78f869d3 100644
@@ -2588,7 +2588,7 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh)
  */
 static int _setup_reset(struct omap_hwmod *oh)
 {
-	int r;
+	int r = 0;
 
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
Signature · 1 line
2.20.1
author maintainer
#107 lore raw

PATCH 107/271 media: davinci-isif: avoid uninitialized variable use

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 0e633f97162c1c74c68e2eb20bbd9259dce87cd9 ]

clang warns about a possible variable use that gcc never complained about:

drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here

      [-Werror,-Wuninitialized]
                dm365_vpss_set_pg_frame_size(frame_size);
                                             ^~~~~~~~~~
drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here
        struct vpss_pg_frame_size frame_size;
        ^

1 error generated.

There is no initialization for this variable at all, and there has never been one in the mainline kernel, so we really should not put that stack data into an mmio register.

On the other hand, I suspect that gcc checks the condition more closely and notices that the global isif_cfg.bayer.config_params.test_pat_gen flag is initialized to zero and never written to from any code path, so anything depending on it can be eliminated.

To shut up the clang warning, just remove the dead code manually, it has probably never been used because any attempt to do so would have resulted in undefined behavior.

Fixes 63e3ab142fa3 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365")
---
 drivers/media/platform/davinci/isif.c | 9 ---------
 1 file changed, 9 deletions(-)
drivers/media/platform/davinci/isif.c +0 -9
index 78e37cf3470f2..b51b875c5a612 100644
@@ -890,9 +890,7 @@ static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
 static int isif_config_ycbcr(void)
 {
 	struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
-	struct vpss_pg_frame_size frame_size;
 	u32 modeset = 0, ccdcfg = 0;
-	struct vpss_sync_pol sync;
 
 	dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
 
@@ -980,13 +978,6 @@ static int isif_config_ycbcr(void)
 		/* two fields are interleaved in memory */
 		regw(0x00000249, SDOFST);
 
-	/* Setup test pattern if enabled */
-	if (isif_cfg.bayer.config_params.test_pat_gen) {
-		sync.ccdpg_hdpol = params->hd_pol;
-		sync.ccdpg_vdpol = params->vd_pol;
-		dm365_vpss_set_sync_pol(sync);
-		dm365_vpss_set_pg_frame_size(frame_size);
-	}
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#108 lore raw

PATCH 108/271 media: tw5864: Fix possible NULL pointer dereference in tw5864_handle_frame

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 2e7682ebfc750177a4944eeb56e97a3f05734528 ]

'vb' null check should be done before dereferencing it in tw5864_handle_frame, otherwise a NULL pointer dereference may occur.

Fixes 34d1324edd31 ("[media] pci: Add tw5864 driver")
---
 drivers/media/pci/tw5864/tw5864-video.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/pci/tw5864/tw5864-video.c +2 -2
index 1ddf80f85c248..27ff6e0d98453 100644
@@ -1386,13 +1386,13 @@ static void tw5864_handle_frame(struct tw5864_h264_frame *frame)
 	input->vb = NULL;
 	spin_unlock_irqrestore(&input->slock, flags);
 
-	v4l2_buf = to_vb2_v4l2_buffer(&vb->vb.vb2_buf);
-
 	if (!vb) { /* Gone because of disabling */
 		dev_dbg(&dev->pci->dev, "vb is empty, dropping frame\n");
 		return;
 	}
 
+	v4l2_buf = to_vb2_v4l2_buffer(&vb->vb.vb2_buf);
+
 	/*
 	 * Check for space.
 	 * Mind the overhead of startcode emulation prevention.
Signature · 1 line
2.20.1
author maintainer
#109 lore raw

PATCH 109/271 spi: tegra114: clear packed bit for unpacked mode

In reply to Greg Kroah-Hartman

From: Sowjanya Komatineni <[email protected]>

[ Upstream commit 7b3d10cdf54b8bc1dc0da21faed9789ac4da3684 ]

Fixes Clear packed bit when not using packed mode.

Packed bit is not cleared when not using packed mode. This results in transfer timeouts for the unpacked mode transfers followed by the packed mode transfers.

---
 drivers/spi/spi-tegra114.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/spi/spi-tegra114.c +2 -0
index 705f515863d4f..d98c502a9c478 100644
@@ -730,6 +730,8 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi,
 
 	if (tspi->is_packed)
 		command1 |= SPI_PACKED;
+	else
+		command1 &= ~SPI_PACKED;
 
 	command1 &= ~(SPI_CS_SEL_MASK | SPI_TX_EN | SPI_RX_EN);
 	tspi->cur_direction = 0;
Signature · 1 line
2.20.1
author maintainer
#110 lore raw

PATCH 110/271 spi: tegra114: fix for unpacked mode transfers

In reply to Greg Kroah-Hartman

From: Sowjanya Komatineni <[email protected]>

[ Upstream commit 1a89ac5b91895127f7c586ec5075c3753ca25501 ]

Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked mode when transfer length is not a multiple of requested bits per word.

unpacked mode transfers fails when the transfer includes partial bytes in the last word.

Total words to be written/read to/from FIFO is computed based on transfer length and bits per word. Unpacked mode includes 0 padding bytes for partial words to align with bits per word and these extra bytes are also accounted for calculating bytes left to transfer in the current driver.

This causes extra bytes access of tx/rx buffers along with buffer index position crossing actual length where remain_len becomes negative and due to unsigned type, negative value is a 32 bit representation of signed value and transferred bytes never meets the actual transfer length resulting in transfer timeout and a hang.

This patch fixes this with proper computation of the actual bytes to fill in FIFO during transmit and the actual bytes to read from FIFO during receive ignoring 0 padded bytes.

---
 drivers/spi/spi-tegra114.c | 43 +++++++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 7 deletions(-)
drivers/spi/spi-tegra114.c +36 -7
index d98c502a9c478..e37712bed0b2d 100644
@@ -307,10 +307,16 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tegra_spi_writel(tspi, x, SPI_TX_FIFO);
 		}
+
+		tspi->cur_tx_pos += written_words * tspi->bytes_per_word;
 	} else {
+		unsigned int write_bytes;
 		max_n_32bit = min(tspi->curr_dma_words,  tx_empty_count);
 		written_words = max_n_32bit;
 		nbytes = written_words * tspi->bytes_per_word;
+		if (nbytes > t->len - tspi->cur_pos)
+			nbytes = t->len - tspi->cur_pos;
+		write_bytes = nbytes;
 		for (count = 0; count < max_n_32bit; count++) {
 			u32 x = 0;
 
@@ -319,8 +325,10 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tegra_spi_writel(tspi, x, SPI_TX_FIFO);
 		}
+
+		tspi->cur_tx_pos += write_bytes;
 	}
-	tspi->cur_tx_pos += written_words * tspi->bytes_per_word;
+
 	return written_words;
 }
 
@@ -344,20 +352,27 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf(
 			for (i = 0; len && (i < 4); i++, len--)
 				*rx_buf++ = (x >> i*8) & 0xFF;
 		}
-		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 		read_words += tspi->curr_dma_words;
+		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
+		u8 bytes_per_word = tspi->bytes_per_word;
+		unsigned int read_bytes;
 
+		len = rx_full_count * bytes_per_word;
+		if (len > t->len - tspi->cur_pos)
+			len = t->len - tspi->cur_pos;
+		read_bytes = len;
 		for (count = 0; count < rx_full_count; count++) {
 			u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask;
 
-			for (i = 0; (i < tspi->bytes_per_word); i++)
+			for (i = 0; len && (i < bytes_per_word); i++, len--)
 				*rx_buf++ = (x >> (i*8)) & 0xFF;
 		}
-		tspi->cur_rx_pos += rx_full_count * tspi->bytes_per_word;
 		read_words += rx_full_count;
+		tspi->cur_rx_pos += read_bytes;
 	}
+
 	return read_words;
 }
 
@@ -372,12 +387,17 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
 		unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
 
 		memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len);
+		tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		unsigned int i;
 		unsigned int count;
 		u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
 		unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
+		unsigned int write_bytes;
 
+		if (consume > t->len - tspi->cur_pos)
+			consume = t->len - tspi->cur_pos;
+		write_bytes = consume;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			u32 x = 0;
 
@@ -386,8 +406,9 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tspi->tx_dma_buf[count] = x;
 		}
+
+		tspi->cur_tx_pos += write_bytes;
 	}
-	tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 
 	/* Make the dma buffer to read by dma */
 	dma_sync_single_for_device(tspi->dev, tspi->tx_dma_phys,
@@ -405,20 +426,28 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf(
 		unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
 
 		memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len);
+		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		unsigned int i;
 		unsigned int count;
 		unsigned char *rx_buf = t->rx_buf + tspi->cur_rx_pos;
 		u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
+		unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
+		unsigned int read_bytes;
 
+		if (consume > t->len - tspi->cur_pos)
+			consume = t->len - tspi->cur_pos;
+		read_bytes = consume;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			u32 x = tspi->rx_dma_buf[count] & rx_mask;
 
-			for (i = 0; (i < tspi->bytes_per_word); i++)
+			for (i = 0; consume && (i < tspi->bytes_per_word);
+							i++, consume--)
 				*rx_buf++ = (x >> (i*8)) & 0xFF;
 		}
+
+		tspi->cur_rx_pos += read_bytes;
 	}
-	tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 
 	/* Make the dma buffer to read by dma */
 	dma_sync_single_for_device(tspi->dev, tspi->rx_dma_phys,
Signature · 1 line
2.20.1
author maintainer
#111 lore raw

PATCH 111/271 soc/fsl/qe: Fix an error code in qe_pin_request()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
---
 drivers/soc/fsl/qe/gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/soc/fsl/qe/gpio.c +3 -1
index 0aaf429f31d57..b5a7107a9c0a9 100644
@@ -152,8 +152,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	if (err < 0)
 		goto err0;
 	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
+	if (WARN_ON(!gc)) {
+		err = -ENODEV;
 		goto err0;
+	}
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
Signature · 1 line
2.20.1
author maintainer
#112 lore raw

PATCH 112/271 spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios

In reply to Greg Kroah-Hartman

From: Martin Sperl <[email protected]>

[ Upstream commit 509c583620e9053e43d611bf1614fc3d3abafa96 ]

The original driver by default defines num_chipselects as -1. This actually allicates an array of 65535 entries in of_spi_register_master.

There is a side-effect for buggy device trees that (contrary to dt-binding documentation) have no cs-gpio defined.

This mode was never supported by the driver due to limitations of native cs and additional code complexity and is explicitly not stated to be implemented.

To keep backwards compatibility with such buggy DTs we limit the number of chip_selects to 1, as for all practical purposes it is only ever realistic to use a single chip select in native cs mode without negative side-effects.

Fixes 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
---
 drivers/spi/spi-bcm2835aux.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/spi/spi-bcm2835aux.c +12 -1
index 5c89bbb05441b..e075712c501e8 100644
@@ -416,7 +416,18 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, master);
 	master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->num_chipselect = -1;
+	/* even though the driver never officially supported native CS
+	 * allow a single native CS for legacy DT support purposes when
+	 * no cs-gpio is configured.
+	 * Known limitations for native cs are:
+	 * * multiple chip-selects: cs0-cs2 are all simultaniously asserted
+	 *     whenever there is a transfer -  this even includes SPI_NO_CS
+	 * * SPI_CS_HIGH: is ignores - cs are always asserted low
+	 * * cs_change: cs is deasserted after each spi_transfer
+	 * * cs_delay_usec: cs is always deasserted one SCK cycle after
+	 *     a spi_transfer
+	 */
+	master->num_chipselect = 1;
 	master->transfer_one = bcm2835aux_spi_transfer_one;
 	master->handle_err = bcm2835aux_spi_handle_err;
 	master->prepare_message = bcm2835aux_spi_prepare_message;
Signature · 1 line
2.20.1
author maintainer
#113 lore raw

PATCH 113/271 ehea: Fix a copy-paste err in ehea_init_port_res

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit c8f191282f819ab4e9b47b22a65c6c29734cefce ]

pr->tx_bytes should be assigned to tx_bytes other than rx_bytes.

Fixes ce45b873028f ("ehea: Fixing statistics")
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ibm/ehea/ehea_main.c +1 -1
index 2dd17e01e3a7a..3692adb8902d1 100644
@@ -1476,7 +1476,7 @@ static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
 
 	memset(pr, 0, sizeof(struct ehea_port_res));
 
-	pr->tx_bytes = rx_bytes;
+	pr->tx_bytes = tx_bytes;
 	pr->tx_packets = tx_packets;
 	pr->rx_bytes = rx_bytes;
 	pr->rx_packets = rx_packets;
Signature · 1 line
2.20.1
author maintainer
#114 lore raw

PATCH 114/271 scsi: qla2xxx: Unregister chrdev if module initialization fails

In reply to Greg Kroah-Hartman

From: Bart Van Assche <[email protected]>

[ Upstream commit c794d24ec9eb6658909955772e70f34bef5b5b91 ]

If module initialization fails after the character device has been registered, unregister the character device. Additionally, avoid duplicating error path code.

Cc Himanshu Madhani <[email protected]>
Cc Giridhar Malavali <[email protected]>
Fixes 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35.
---
 drivers/scsi/qla2xxx/qla_os.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +21 -13
index 3bae56b202f87..e730aabc26d0d 100644
@@ -6055,8 +6055,7 @@ qla2x00_module_init(void)
 	/* Initialize target kmem_cache and mem_pools */
 	ret = qlt_init();
 	if (ret < 0) {
-		kmem_cache_destroy(srb_cachep);
-		return ret;
+		goto destroy_cache;
 	} else if (ret > 0) {
 		/*
 		 * If initiator mode is explictly disabled by qlt_init(),
@@ -6075,11 +6074,10 @@ qla2x00_module_init(void)
 	qla2xxx_transport_template =
 	    fc_attach_transport(&qla2xxx_transport_functions);
 	if (!qla2xxx_transport_template) {
-		kmem_cache_destroy(srb_cachep);
 		ql_log(ql_log_fatal, NULL, 0x0002,
 		    "fc_attach_transport failed...Failing load!.\n");
-		qlt_exit();
-		return -ENODEV;
+		ret = -ENODEV;
+		goto qlt_exit;
 	}
 
 	apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops);
@@ -6091,27 +6089,37 @@ qla2x00_module_init(void)
 	qla2xxx_transport_vport_template =
 	    fc_attach_transport(&qla2xxx_transport_vport_functions);
 	if (!qla2xxx_transport_vport_template) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
 		ql_log(ql_log_fatal, NULL, 0x0004,
 		    "fc_attach_transport vport failed...Failing load!.\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto unreg_chrdev;
 	}
 	ql_log(ql_log_info, NULL, 0x0005,
 	    "QLogic Fibre Channel HBA Driver: %s.\n",
 	    qla2x00_version_str);
 	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
-		fc_release_transport(qla2xxx_transport_vport_template);
 		ql_log(ql_log_fatal, NULL, 0x0006,
 		    "pci_register_driver failed...ret=%d Failing load!.\n",
 		    ret);
+		goto release_vport_transport;
 	}
 	return ret;
+
+release_vport_transport:
+	fc_release_transport(qla2xxx_transport_vport_template);
+
+unreg_chrdev:
+	if (apidev_major >= 0)
+		unregister_chrdev(apidev_major, QLA2XXX_APIDEV);
+	fc_release_transport(qla2xxx_transport_template);
+
+qlt_exit:
+	qlt_exit();
+
+destroy_cache:
+	kmem_cache_destroy(srb_cachep);
+	return ret;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#115 lore raw

PATCH 115/271 ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 9ee8578d953023cc57e7e736ae48502c707c0210 ]

Since commit 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions") kfree, iounmap, clk_put etc are not needed anymore in remove path.

Fixes 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
[ commit message spelling fix ]
---
 arch/arm/plat-pxa/ssp.c | 6 ------
 1 file changed, 6 deletions(-)
arch/arm/plat-pxa/ssp.c +0 -6
index b92673efffffb..97bd43c16cd87 100644
@@ -230,18 +230,12 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 
 static int pxa_ssp_remove(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct ssp_device *ssp;
 
 	ssp = platform_get_drvdata(pdev);
 	if (ssp == NULL)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_put(ssp->clk);
-
 	mutex_lock(&ssp_lock);
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
Signature · 1 line
2.20.1
author maintainer
#116 lore raw

PATCH 116/271 hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

In reply to Greg Kroah-Hartman

From: Guenter Roeck <[email protected]>

[ Upstream commit e95fd518d05bfc087da6fcdea4900a57cfb083bd ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized.

Fixes b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers")
---
 drivers/hwmon/w83627hf.c | 42 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 37 insertions(+), 5 deletions(-)
drivers/hwmon/w83627hf.c +37 -5
index 721295b9a0517..43c0f89cefdf0 100644
@@ -130,17 +130,23 @@ superio_select(struct w83627hf_sio_data *sio, int ld)
 	outb(ld,  sio->sioaddr + 1);
 }
 
-static inline void
+static inline int
 superio_enter(struct w83627hf_sio_data *sio)
 {
+	if (!request_muxed_region(sio->sioaddr, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x87, sio->sioaddr);
 	outb(0x87, sio->sioaddr);
+
+	return 0;
 }
 
 static inline void
 superio_exit(struct w83627hf_sio_data *sio)
 {
 	outb(0xAA, sio->sioaddr);
+	release_region(sio->sioaddr, 2);
 }
 
 #define W627_DEVID 0x52
@@ -1275,7 +1281,7 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 				struct w83627hf_sio_data *sio_data)
 {
-	int err = -ENODEV;
+	int err;
 	u16 val;
 
 	static __initconst char *const names[] = {
@@ -1287,7 +1293,11 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 	};
 
 	sio_data->sioaddr = sioaddr;
-	superio_enter(sio_data);
+	err = superio_enter(sio_data);
+	if (err)
+		return err;
+
+	err = -ENODEV;
 	val = force_id ? force_id : superio_inb(sio_data, DEVID);
 	switch (val) {
 	case W627_DEVID:
@@ -1641,9 +1651,21 @@ static int w83627thf_read_gpio5(struct platform_device *pdev)
 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int res = 0xff, sel;
 
-	superio_enter(sio_data);
+	if (superio_enter(sio_data)) {
+		/*
+		 * Some other driver reserved the address space for itself.
+		 * We don't want to fail driver instantiation because of that,
+		 * so display a warning and keep going.
+		 */
+		dev_warn(&pdev->dev,
+			 "Can not read VID data: Failed to enable SuperIO access\n");
+		return res;
+	}
+
 	superio_select(sio_data, W83627HF_LD_GPIO5);
 
+	res = 0xff;
+
 	/* Make sure these GPIO pins are enabled */
 	if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
 		dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
@@ -1674,7 +1696,17 @@ static int w83687thf_read_vid(struct platform_device *pdev)
 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int res = 0xff;
 
-	superio_enter(sio_data);
+	if (superio_enter(sio_data)) {
+		/*
+		 * Some other driver reserved the address space for itself.
+		 * We don't want to fail driver instantiation because of that,
+		 * so display a warning and keep going.
+		 */
+		dev_warn(&pdev->dev,
+			 "Can not read VID data: Failed to enable SuperIO access\n");
+		return res;
+	}
+
 	superio_select(sio_data, W83627HF_LD_HWM);
 
 	/* Make sure these GPIO pins are enabled */
Signature · 1 line
2.20.1
author maintainer
#117 lore raw

PATCH 117/271 tipc: set sysctl_tipc_rmem and named_timeout right range

In reply to Greg Kroah-Hartman

From: Jie Liu <[email protected]>

[ Upstream commit 4bcd4ec1017205644a2697bccbc3b5143f522f5f ]

We find that sysctl_tipc_rmem and named_timeout do not have the right minimum setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem. And named_timeout as a timeout setting should be not less than zero.

Fixes cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf")
Fixes a5325ae5b8bff ("tipc: add name distributor resiliency queue")
---
 net/tipc/sysctl.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/tipc/sysctl.c +6 -2
index 1a779b1e85100..40f6d82083d7b 100644
@@ -37,6 +37,8 @@
 
 #include <linux/sysctl.h>
 
+static int zero;
+static int one = 1;
 static struct ctl_table_header *tipc_ctl_hdr;
 
 static struct ctl_table tipc_table[] = {
@@ -45,14 +47,16 @@ static struct ctl_table tipc_table[] = {
 		.data		= &sysctl_tipc_rmem,
 		.maxlen		= sizeof(sysctl_tipc_rmem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1         = &one,
 	},
 	{
 		.procname	= "named_timeout",
 		.data		= &sysctl_tipc_named_timeout,
 		.maxlen		= sizeof(sysctl_tipc_named_timeout),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1         = &zero,
 	},
 	{}
 };
Signature · 1 line
2.20.1
author maintainer
#118 lore raw

PATCH 118/271 powerpc: vdso: Make vdso32 installation conditional in vdso_install

In reply to Greg Kroah-Hartman

From: Ben Hutchings <[email protected]>

[ Upstream commit ff6d27823f619892ab96f7461764840e0d786b15 ]

The 32-bit vDSO is not needed and not normally built for 64-bit little-endian configurations. However, the vdso_install target still builds and installs it. Add the same config condition as is normally used for the build.

Fixes e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...")
---
 arch/powerpc/Makefile | 2 ++
 1 file changed, 2 insertions(+)
arch/powerpc/Makefile +2 -0
index a60c9c6e5cc17..de29b88c0e700 100644
@@ -373,7 +373,9 @@ vdso_install:
 ifeq ($(CONFIG_PPC64),y)
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
 endif
+ifdef CONFIG_VDSO32
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@
+endif
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
Signature · 1 line
2.20.1
author maintainer
#119 lore raw

PATCH 119/271 ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect

In reply to Greg Kroah-Hartman

From: Vladimir Oltean <[email protected]>

[ Upstream commit c7861adbe37f576931650ad8ef805e0c47564b9a ]

Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus. But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC are pointing towards the same internal PCS. Therefore nobody is controlling the internal PCS of eTSEC0.

Upon initial ndo_open, the SGMII link is ok by virtue of U-boot initialization. But upon an ifdown/ifup sequence, the code path from ndo_open -> init_phy -> gfar_configure_serdes does not get executed for the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII link remains down for eTSEC0. On the LS1021A-TWR board, to signal this failure condition, the PHY driver keeps printing '803x_aneg_done: SGMII link is not ok'.

Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match mdio1 device.

Fixes 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
---
 arch/arm/boot/dts/ls1021a-twr.dts |  9 ++++++++-
 arch/arm/boot/dts/ls1021a.dtsi    | 11 ++++++++++-
 2 files changed, 18 insertions(+), 2 deletions(-)
arch/arm/boot/dts/ls1021a-twr.dts +8 -1
index 44715c8ef756b..72a3fc63d0ece 100644
@@ -143,7 +143,7 @@
 };
 
 &enet0 {
-	tbi-handle = <&tbi1>;
+	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
 	phy-connection-type = "sgmii";
 	status = "okay";
@@ -222,6 +222,13 @@
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
 	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
 	tbi1: tbi-phy@1f {
 		reg = <0x1f>;
 		device_type = "tbi-phy";
arch/arm/boot/dts/ls1021a.dtsi +10 -1
index 825f6eae3d1c1..27133c3a4b122 100644
@@ -505,13 +505,22 @@
 		};
 
 		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
+			compatible = "fsl,etsec2-mdio";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		mdio1: mdio@2d64000 {
+			compatible = "fsl,etsec2-mdio";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
 		ptp_clock@2d10e00 {
 			compatible = "fsl,etsec-ptp";
 			reg = <0x0 0x2d10e00 0x0 0xb0>;
Signature · 1 line
2.20.1
author maintainer
#120 lore raw

PATCH 120/271 media: ov2659: fix unbalanced mutex_lock/unlock

In reply to Greg Kroah-Hartman

From: Akinobu Mita <[email protected]>

[ Upstream commit 384538bda10913e5c94ec5b5d34bd3075931bcf4 ]

Avoid returning with mutex locked.

Fixes fa8cb6444c32 ("[media] ov2659: Don't depend on subdev API")
---
 drivers/media/i2c/ov2659.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/ov2659.c +1 -1
index ade3c48e2e0cf..18546f950d792 100644
@@ -1137,7 +1137,7 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
 		mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
 		*mf = fmt->format;
 #else
-		return -ENOTTY;
+		ret = -ENOTTY;
 #endif
 	} else {
 		s64 val;
Signature · 1 line
2.20.1
author maintainer
#121 lore raw

PATCH 121/271 6lowpan: Off by one handling ->nexthdr

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit f57c4bbf34439531adccd7d3a4ecc14f409c1399 ]

NEXTHDR_MAX is 255. What happens here is that we take a u8 value "hdr->nexthdr" from the network and then look it up in lowpan_nexthdr_nhcs[]. The problem is that if hdr->nexthdr is 0xff then we read one element beyond the end of the array so the array needs to be one element larger.

Fixes 92aa7c65d295 ("6lowpan: add generic nhc layer interface")
---
 net/6lowpan/nhc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/6lowpan/nhc.c +1 -1
index 7008d53e455c5..e61679bf09085 100644
@@ -18,7 +18,7 @@
 #include "nhc.h"
 
 static struct rb_root rb_root = RB_ROOT;
-static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX];
+static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX + 1];
 static DEFINE_SPINLOCK(lowpan_nhc_lock);
 
 static int lowpan_nhc_insert(struct lowpan_nhc *nhc)
Signature · 1 line
2.20.1
author maintainer
#122 lore raw

PATCH 122/271 dmaengine: axi-dmac: Dont check the number of frames for alignment

In reply to Greg Kroah-Hartman

From: Alexandru Ardelean <[email protected]>

[ Upstream commit 648865a79d8ee3d1aa64aab5eb2a9d12eeed14f9 ]

In 2D transfers (for the AXI DMAC), the number of frames (numf) represents Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful for video transfers where screen resolutions ( X * Y ) are typically aligned for X, but not for Y.

There is no requirement for Y_LENGTH to be aligned to the bus-width (or anything), and this is also true for AXI DMAC.

Checking the Y_LENGTH for alignment causes false errors when initiating DMA transfers. This change fixes this by checking only that the Y_LENGTH is non-zero.

Fixes 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
---
 drivers/dma/dma-axi-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/dma-axi-dmac.c +1 -1
index 7f0b9aa158679..9887f2a14aa98 100644
@@ -451,7 +451,7 @@ static struct dma_async_tx_descriptor *axi_dmac_prep_interleaved(
 
 	if (chan->hw_2d) {
 		if (!axi_dmac_check_len(chan, xt->sgl[0].size) ||
-		    !axi_dmac_check_len(chan, xt->numf))
+		    xt->numf == 0)
 			return NULL;
 		if (xt->sgl[0].size + dst_icg > chan->max_length ||
 		    xt->sgl[0].size + src_icg > chan->max_length)
Signature · 1 line
2.20.1
author maintainer
#123 lore raw

PATCH 123/271 ALSA: usb-audio: Handle the error from snd_usb_mixer_apply_create_quirk()

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 328e9f6973be2ee67862cb17bf6c0c5c5918cd72 ]

The error from snd_usb_mixer_apply_create_quirk() is ignored in the current usb-audio driver code, which will continue the probing even after the error. Let's take it more serious.

Fixes 7b1eda223deb ("ALSA: usb-mixer: factor out quirks")
---
 sound/usb/mixer.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
sound/usb/mixer.c +3 -1
index 64fa1bbf0acb3..54011f8543a72 100644
@@ -2626,7 +2626,9 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
 	    (err = snd_usb_mixer_status_create(mixer)) < 0)
 		goto _error;
 
-	snd_usb_mixer_apply_create_quirk(mixer);
+	err = snd_usb_mixer_apply_create_quirk(mixer);
+	if (err < 0)
+		goto _error;
 
 	err = snd_device_new(chip->card, SNDRV_DEV_CODEC, mixer, &dev_ops);
 	if (err < 0)
Signature · 1 line
2.20.1
author maintainer
#124 lore raw

PATCH 124/271 packet: in recvmsg msg_name return at least sizeof sockaddr_ll

In reply to Greg Kroah-Hartman

From: Willem de Bruijn <[email protected]>

[ Upstream commit b2cf86e1563e33a14a1c69b3e508d15dc12f804c ]

Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send.

This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length.

Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes.

Change v1->v2: do not overwrite zeroed padding again. use copy_len.

Fixes 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
---
 net/packet/af_packet.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
net/packet/af_packet.c +11 -2
index 40cade140222f..47a862cc7b349 100644
@@ -3404,20 +3404,29 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
+		int copy_len;
+
 		/* If the address length field is there to be filled
 		 * in, we fill it in now.
 		 */
 		if (sock->type == SOCK_PACKET) {
 			__sockaddr_check_size(sizeof(struct sockaddr_pkt));
 			msg->msg_namelen = sizeof(struct sockaddr_pkt);
+			copy_len = msg->msg_namelen;
 		} else {
 			struct sockaddr_ll *sll = &PACKET_SKB_CB(skb)->sa.ll;
 
 			msg->msg_namelen = sll->sll_halen +
 				offsetof(struct sockaddr_ll, sll_addr);
+			copy_len = msg->msg_namelen;
+			if (msg->msg_namelen < sizeof(struct sockaddr_ll)) {
+				memset(msg->msg_name +
+				       offsetof(struct sockaddr_ll, sll_addr),
+				       0, sizeof(sll->sll_addr));
+				msg->msg_namelen = sizeof(struct sockaddr_ll);
+			}
 		}
-		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa,
-		       msg->msg_namelen);
+		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa, copy_len);
 	}
 
 	if (pkt_sk(sk)->auxdata) {
Signature · 1 line
2.20.1
author maintainer
#125 lore raw

PATCH 125/271 ASoC: fix valid stream condition

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit 6a7c59c6d9f3b280e81d7a04bbe4e55e90152dce ]

A stream may specify a rate range using 'rate_min' and 'rate_max', so a stream may be valid and not specify any rates. However, as stream cannot be valid and not have any channel. Let's use this condition instead to determine if a stream is valid or not.

Fixes cde79035c6cf ("ASoC: Handle multiple codecs with split playback / capture")
---
 sound/soc/soc-pcm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/soc-pcm.c +2 -2
index d69559e458725..635b22fa1101a 100644
@@ -48,8 +48,8 @@ static bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream)
 	else
 		codec_stream = &dai->driver->capture;
 
-	/* If the codec specifies any rate at all, it supports the stream. */
-	return codec_stream->rates;
+	/* If the codec specifies any channels at all, it supports the stream */
+	return codec_stream->channels_min;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#126 lore raw

PATCH 126/271 usb: gadget: fsl: fix link error against usb-gadget module

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 2100e3ca3676e894fa48b8f6f01d01733387fe81 ]

The dependency to ensure this driver links correctly fails since it can not be a loadable module:

drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral':
phy-fsl-usb.c:(.text+0x2224): undefined reference to `usb_gadget_vbus_disconnect'

Make the option 'tristate' so it can work correctly.

Fixes 5a8d651a2bde ("usb: gadget: move gadget API functions to udc-core")
---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/phy/Kconfig +1 -1
index 19ce615455c1b..de70e70d02bed 100644
@@ -19,7 +19,7 @@ config AB8500_USB
 	  in host mode, low speed.
 
 config FSL_USB2_OTG
-	bool "Freescale USB OTG Transceiver Driver"
+	tristate "Freescale USB OTG Transceiver Driver"
 	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
Signature · 1 line
2.20.1
author maintainer
#127 lore raw

PATCH 127/271 IB/mlx5: Add missing XRC options to QP optional params mask

In reply to Greg Kroah-Hartman

From: Jack Morgenstein <[email protected]>

[ Upstream commit 8f4426aa19fcdb9326ac44154a117b1a3a5ae126 ]

The QP transition optional parameters for the various transition for XRC QPs are identical to those for RC QPs.

Many of the XRC QP transition optional parameter bits are missing from the QP optional mask table. These omissions caused failures when doing XRC QP state transitions.

For example, when trying to change the response timer of an XRC receive QP via the RTS2RTS transition, the new timer value was ignored because MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask for XRC qps for the RTS2RTS transition.

Fix this by adding the missing XRC optional parameters for all QP transitions to the opt_mask table.

Fixes e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Fixes a4774e9095de ("IB/mlx5: Fix opt param mask according to firmware spec")
---
 drivers/infiniband/hw/mlx5/qp.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/infiniband/hw/mlx5/qp.c +21 -0
index a7bc89f5dae7e..4d906a7904818 100644
@@ -2324,6 +2324,11 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_PKEY_INDEX	|
 					  MLX5_QP_OPTPAR_Q_KEY		|
 					  MLX5_QP_OPTPAR_PRI_PORT,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_PKEY_INDEX	|
+					  MLX5_QP_OPTPAR_PRI_PORT,
 		},
 		[MLX5_QP_STATE_RTR] = {
 			[MLX5_QP_ST_RC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH  |
@@ -2357,6 +2362,12 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 					  MLX5_QP_OPTPAR_RWE		|
 					  MLX5_QP_OPTPAR_PM_STATE,
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH	|
+					  MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_PM_STATE	|
+					  MLX5_QP_OPTPAR_RNR_TIMEOUT,
 		},
 	},
 	[MLX5_QP_STATE_RTS] = {
@@ -2373,6 +2384,12 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY		|
 					  MLX5_QP_OPTPAR_SRQN		|
 					  MLX5_QP_OPTPAR_CQN_RCV,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_RNR_TIMEOUT	|
+					  MLX5_QP_OPTPAR_PM_STATE	|
+					  MLX5_QP_OPTPAR_ALT_ADDR_PATH,
 		},
 	},
 	[MLX5_QP_STATE_SQER] = {
@@ -2384,6 +2401,10 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 					   MLX5_QP_OPTPAR_RWE		|
 					   MLX5_QP_OPTPAR_RAE		|
 					   MLX5_QP_OPTPAR_RRE,
+			[MLX5_QP_ST_XRC]  = MLX5_QP_OPTPAR_RNR_TIMEOUT	|
+					   MLX5_QP_OPTPAR_RWE		|
+					   MLX5_QP_OPTPAR_RAE		|
+					   MLX5_QP_OPTPAR_RRE,
 		},
 	},
 };
Signature · 1 line
2.20.1
author maintainer
#128 lore raw

PATCH 128/271 iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU

In reply to Greg Kroah-Hartman

From: Lu Baolu <[email protected]>

[ Upstream commit 5daab58043ee2bca861068e2595564828f3bc663 ]

The kernel parameter igfx_off is used by users to disable DMA remapping for the Intel integrated graphic device. It was designed for bare metal cases where a dedicated IOMMU is used for graphic. This doesn't apply to virtual IOMMU case where an include-all IOMMU is used. This makes the kernel parameter work with virtual IOMMU as well.

Cc Ashok Raj <[email protected]>
Cc Jacob Pan <[email protected]>
Fixes c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
---
 drivers/iommu/intel-iommu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +4 -1
index 25cc6ae87039d..5c6e0a9fd2f36 100644
@@ -3345,9 +3345,12 @@ static int __init init_dmars(void)
 		iommu_identity_mapping |= IDENTMAP_ALL;
 
 #ifdef CONFIG_INTEL_IOMMU_BROKEN_GFX_WA
-	iommu_identity_mapping |= IDENTMAP_GFX;
+	dmar_map_gfx = 0;
 #endif
 
+	if (!dmar_map_gfx)
+		iommu_identity_mapping |= IDENTMAP_GFX;
+
 	check_tylersburg_isoch();
 
 	if (iommu_identity_mapping) {
Signature · 1 line
2.20.1
author maintainer
#129 lore raw

PATCH 129/271 net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry

In reply to Greg Kroah-Hartman

From: Sameeh Jubran <[email protected]>

[ Upstream commit 3c6eeff295f01bdf1c6c3addcb0a04c0c6c029e9 ]

second parameter should be the index of the table rather than the value.

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/amazon/ena/ena_ethtool.c +2 -2
index 67b2338f8fb34..06fd061a20e9a 100644
@@ -697,8 +697,8 @@ static int ena_set_rxfh(struct net_device *netdev, const u32 *indir,
 	if (indir) {
 		for (i = 0; i < ENA_RX_RSS_TABLE_SIZE; i++) {
 			rc = ena_com_indirect_table_fill_entry(ena_dev,
-							       ENA_IO_RXQ_IDX(indir[i]),
-							       i);
+							       i,
+							       ENA_IO_RXQ_IDX(indir[i]));
 			if (unlikely(rc)) {
 				netif_err(adapter, drv, netdev,
 					  "Cannot fill indirect table (index is too large)\n");
Signature · 1 line
2.20.1
author maintainer
#130 lore raw

PATCH 130/271 net: ena: fix: Free napi resources when ena_up() fails

In reply to Greg Kroah-Hartman

From: Sameeh Jubran <[email protected]>

[ Upstream commit b287cdbd1cedfc9606682c6e02b58d00ff3a33ae ]

ena_up() calls ena_init_napi() but does not call ena_del_napi() in case of failure. This causes a segmentation fault upon rmmod when netif_napi_del() is called. Fix this bug by calling ena_del_napi() before returning error from ena_up().

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/amazon/ena/ena_netdev.c +1 -0
index 961f31c8356b7..da21886609e30 100644
@@ -1702,6 +1702,7 @@ err_setup_rx:
 err_setup_tx:
 	ena_free_io_irq(adapter);
 err_req_irq:
+	ena_del_napi(adapter);
 
 	return rc;
 }
Signature · 1 line
2.20.1
author maintainer
#131 lore raw

PATCH 131/271 net: ena: fix incorrect test of supported hash function

In reply to Greg Kroah-Hartman

From: Sameeh Jubran <[email protected]>

[ Upstream commit d3cfe7ddbc3dfbb9b201615b7fef8fd66d1b5fe8 ]

ena_com_set_hash_function() tests if a hash function is supported by the device before setting it.
The test returns the opposite result than needed. Reverse the condition to return the correct value.
Also use the BIT macro instead of inline shift.

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/amazon/ena/ena_com.c +1 -1
index bcd993140f841..2d196d521b836 100644
@@ -1967,7 +1967,7 @@ int ena_com_set_hash_function(struct ena_com_dev *ena_dev)
 	if (unlikely(ret))
 		return ret;
 
-	if (get_resp.u.flow_hash_func.supported_func & (1 << rss->hash_func)) {
+	if (!(get_resp.u.flow_hash_func.supported_func & BIT(rss->hash_func))) {
 		pr_err("Func hash %d isn't supported by device, abort\n",
 		       rss->hash_func);
 		return -EPERM;
Signature · 1 line
2.20.1
author maintainer
#132 lore raw

PATCH 132/271 net: ena: fix ena_com_fill_hash_function() implementation

In reply to Greg Kroah-Hartman

From: Sameeh Jubran <[email protected]>

[ Upstream commit 11bd7a00c0d8ffe33d1e926f8e789b4aea787186 ]

ena_com_fill_hash_function() didn't configure the rss->hash_func.

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/amazon/ena/ena_com.c +1 -0
index 2d196d521b836..912dc09bc7a74 100644
@@ -2052,6 +2052,7 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 		return -EINVAL;
 	}
 
+	rss->hash_func = func;
 	rc = ena_com_set_hash_function(ena_dev);
 
 	/* Restore the old function */
Signature · 1 line
2.20.1
author maintainer
#133 lore raw

PATCH 133/271 dmaengine: tegra210-adma: restore channel status

In reply to Greg Kroah-Hartman

From: Sameer Pujar <[email protected]>

[ Upstream commit f33e7bb3eb922618612a90f0a828c790e8880773 ]

Status of ADMA channel registers is not saved and restored during system suspend. During active playback if system enters suspend, this results in wrong state of channel registers during system resume and playback fails to resume properly. Fix this by saving following channel registers in runtime suspend and restore during runtime resume.
* ADMA_CH_LOWER_SRC_ADDR
* ADMA_CH_LOWER_TRG_ADDR
* ADMA_CH_FIFO_CTRL
* ADMA_CH_CONFIG
* ADMA_CH_CTRL
* ADMA_CH_CMD
* ADMA_CH_TC
Runtime PM calls will be inovked during system resume path if a playback or capture needs to be resumed. Hence above changes work fine for system suspend case.

Fixes f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
---
 drivers/dma/tegra210-adma.c | 46 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)
drivers/dma/tegra210-adma.c +45 -1
index e9e46a5207452..8c3cab463354f 100644
@@ -98,6 +98,7 @@ struct tegra_adma_chan_regs {
 	unsigned int src_addr;
 	unsigned int trg_addr;
 	unsigned int fifo_ctrl;
+	unsigned int cmd;
 	unsigned int tc;
 };
 
@@ -127,6 +128,7 @@ struct tegra_adma_chan {
 	enum dma_transfer_direction	sreq_dir;
 	unsigned int			sreq_index;
 	bool				sreq_reserved;
+	struct tegra_adma_chan_regs	ch_regs;
 
 	/* Transfer count and position info */
 	unsigned int			tx_buf_count;
@@ -635,8 +637,30 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
 static int tegra_adma_runtime_suspend(struct device *dev)
 {
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
+	struct tegra_adma_chan_regs *ch_reg;
+	struct tegra_adma_chan *tdc;
+	int i;
 
 	tdma->global_cmd = tdma_read(tdma, ADMA_GLOBAL_CMD);
+	if (!tdma->global_cmd)
+		goto clk_disable;
+
+	for (i = 0; i < tdma->nr_channels; i++) {
+		tdc = &tdma->channels[i];
+		ch_reg = &tdc->ch_regs;
+		ch_reg->cmd = tdma_ch_read(tdc, ADMA_CH_CMD);
+		/* skip if channel is not active */
+		if (!ch_reg->cmd)
+			continue;
+		ch_reg->tc = tdma_ch_read(tdc, ADMA_CH_TC);
+		ch_reg->src_addr = tdma_ch_read(tdc, ADMA_CH_LOWER_SRC_ADDR);
+		ch_reg->trg_addr = tdma_ch_read(tdc, ADMA_CH_LOWER_TRG_ADDR);
+		ch_reg->ctrl = tdma_ch_read(tdc, ADMA_CH_CTRL);
+		ch_reg->fifo_ctrl = tdma_ch_read(tdc, ADMA_CH_FIFO_CTRL);
+		ch_reg->config = tdma_ch_read(tdc, ADMA_CH_CONFIG);
+	}
+
+clk_disable:
 	clk_disable_unprepare(tdma->ahub_clk);
 
 	return 0;
@@ -645,7 +669,9 @@ static int tegra_adma_runtime_suspend(struct device *dev)
 static int tegra_adma_runtime_resume(struct device *dev)
 {
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
-	int ret;
+	struct tegra_adma_chan_regs *ch_reg;
+	struct tegra_adma_chan *tdc;
+	int ret, i;
 
 	ret = clk_prepare_enable(tdma->ahub_clk);
 	if (ret) {
@@ -654,6 +680,24 @@ static int tegra_adma_runtime_resume(struct device *dev)
 	}
 	tdma_write(tdma, ADMA_GLOBAL_CMD, tdma->global_cmd);
 
+	if (!tdma->global_cmd)
+		return 0;
+
+	for (i = 0; i < tdma->nr_channels; i++) {
+		tdc = &tdma->channels[i];
+		ch_reg = &tdc->ch_regs;
+		/* skip if channel was not active earlier */
+		if (!ch_reg->cmd)
+			continue;
+		tdma_ch_write(tdc, ADMA_CH_TC, ch_reg->tc);
+		tdma_ch_write(tdc, ADMA_CH_LOWER_SRC_ADDR, ch_reg->src_addr);
+		tdma_ch_write(tdc, ADMA_CH_LOWER_TRG_ADDR, ch_reg->trg_addr);
+		tdma_ch_write(tdc, ADMA_CH_CTRL, ch_reg->ctrl);
+		tdma_ch_write(tdc, ADMA_CH_FIFO_CTRL, ch_reg->fifo_ctrl);
+		tdma_ch_write(tdc, ADMA_CH_CONFIG, ch_reg->config);
+		tdma_ch_write(tdc, ADMA_CH_CMD, ch_reg->cmd);
+	}
+
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#134 lore raw

PATCH 134/271 l2tp: Fix possible NULL pointer dereference

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 638a3a1e349ddf5b82f222ff5cb3b4f266e7c278 ]

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
PGD 0 P4D 0
Oops: 0000 [#1
CPU: 0 PID: 5697 Comm: modprobe Tainted: G        W         5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__lock_acquire+0x53/0x10b0
Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a
RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128
RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000
FS:  00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0
Call Trace:
 ? __lock_acquire+0x24e/0x10b0
 lock_acquire+0xdf/0x230
 ? flush_workqueue+0x71/0x530
 flush_workqueue+0x97/0x530
 ? flush_workqueue+0x71/0x530
 l2tp_exit_net+0x170/0x2b0 [l2tp_core
 ? l2tp_exit_net+0x93/0x2b0 [l2tp_core
 ops_exit_list.isra.6+0x36/0x60
 unregister_pernet_operations+0xb8/0x110
 unregister_pernet_device+0x25/0x40
 l2tp_init+0x55/0x1000 [l2tp_core
 ? 0xffffffffa018d000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fead031a839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839
RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003
RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80
Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core
CR2: 0000000000000128
---[ end trace 8322b2b8bf83f8e1

If alloc_workqueue fails in l2tp_init, l2tp_net_ops is unregistered on failure path. Then l2tp_exit_net is called which will flush NULL workqueue, this patch add a NULL check to fix it.

Fixes 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path")
---
 net/l2tp/l2tp_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/l2tp/l2tp_core.c +2 -1
index 4ae758bcb2cf4..394a1ddb07827 100644
@@ -1947,7 +1947,8 @@ static __net_exit void l2tp_exit_net(struct net *net)
 	}
 	rcu_read_unlock_bh();
 
-	flush_workqueue(l2tp_wq);
+	if (l2tp_wq)
+		flush_workqueue(l2tp_wq);
 	rcu_barrier();
 }
 
Signature · 1 line
2.20.1
author maintainer
#135 lore raw

PATCH 135/271 media: omap_vout: potential buffer overflow in vidioc_dqbuf()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit dd6e2a981bfe83aa4a493143fd8cf1edcda6c091 ]

The "b->index" is a u32 the comes from the user in the ioctl. It hasn't been checked. We aren't supposed to use it but we're instead supposed to use the value that gets written to it when we call videobuf_dqbuf().

The videobuf_dqbuf() first memsets it to zero and then re-initializes it inside the videobuf_status() function. It's this final value which we want.

Hans Verkuil pointed out that we need to check the return from videobuf_dqbuf(). I ended up doing a little cleanup related to that as well.

Fixes 72915e851da9 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf")
---
 drivers/media/platform/omap/omap_vout.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/media/platform/omap/omap_vout.c +6 -9
index a31b95cb3b09c..77ec70f5fef66 100644
@@ -1526,23 +1526,20 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 	unsigned long size;
 	struct videobuf_buffer *vb;
 
-	vb = q->bufs[b->index];
-
 	if (!vout->streaming)
 		return -EINVAL;
 
-	if (file->f_flags & O_NONBLOCK)
-		/* Call videobuf_dqbuf for non blocking mode */
-		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
-	else
-		/* Call videobuf_dqbuf for  blocking mode */
-		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+	ret = videobuf_dqbuf(q, b, !!(file->f_flags & O_NONBLOCK));
+	if (ret)
+		return ret;
+
+	vb = q->bufs[b->index];
 
 	addr = (unsigned long) vout->buf_phy_addr[vb->i];
 	size = (unsigned long) vb->size;
 	dma_unmap_single(vout->vid_dev->v4l2_dev.dev,  addr,
 				size, DMA_TO_DEVICE);
-	return ret;
+	return 0;
 }
 
 static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
Signature · 1 line
2.20.1
author maintainer
#136 lore raw

PATCH 136/271 media: davinci/vpbe: array underflow in vpbe_enum_outputs()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit b72845ee5577b227131b1fef23f9d9a296621d7b ]

In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but the problem is that "temp_index" can be negative. This patch changes the types to unsigned to address this array underflow bug.

Fixes 66715cdc3224 ("[media] davinci vpbe: VPBE display driver")
---
 drivers/media/platform/davinci/vpbe.c | 2 +-
 include/media/davinci/vpbe.h          | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/media/platform/davinci/vpbe.c +1 -1
index abce9c4a1a8ec..59518c08528b8 100644
@@ -130,7 +130,7 @@ static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
 			     struct v4l2_output *output)
 {
 	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int temp_index = output->index;
+	unsigned int temp_index = output->index;
 
 	if (temp_index >= cfg->num_outputs)
 		return -EINVAL;
include/media/davinci/vpbe.h +1 -1
index 4376beeb28c2c..5d8ceeddc7973 100644
@@ -96,7 +96,7 @@ struct vpbe_config {
 	struct encoder_config_info *ext_encoders;
 	/* amplifier information goes here */
 	struct amp_config_info *amp;
-	int num_outputs;
+	unsigned int num_outputs;
 	/* Order is venc outputs followed by LCD and then external encoders */
 	struct vpbe_output *outputs;
 };
Signature · 1 line
2.20.1
author maintainer
#137 lore raw

PATCH 137/271 platform/x86: alienware-wmi: printing the wrong error code

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 6d1f8b3d75419a8659ac916a1e9543bb3513a882 ]

The "out_data" variable is uninitialized at the point. Originally, this used to print "status" instead and that seems like the correct thing to print.

Fixes bc2ef884320b ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status")
---
 drivers/platform/x86/alienware-wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/alienware-wmi.c +1 -1
index fe419935041c1..bee2115ecf101 100644
@@ -570,7 +570,7 @@ static ssize_t show_hdmi_source(struct device *dev,
 			return scnprintf(buf, PAGE_SIZE,
 					 "input [gpu] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI source status: %d\n", out_data);
+	pr_err("alienware-wmi: unknown HDMI source status: %u\n", status);
 	return scnprintf(buf, PAGE_SIZE, "input gpu [unknown]\n");
 }
 
Signature · 1 line
2.20.1
author maintainer
#138 lore raw

PATCH 138/271 netfilter: ebtables: CONFIG_COMPAT: reject trailing data after last rule

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

[ Upstream commit 680f6af5337c98d116e4f127cea7845339dba8da ]

If userspace provides a rule blob with trailing data after last target, we trigger a splat, then convert ruleset to 64bit format (with trailing data), then pass that to do_replace_finish() which then returns -EINVAL.

Erroring out right away avoids the splat plus unneeded translation and error unwind.

Fixes 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
---
 net/bridge/netfilter/ebtables.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/bridge/netfilter/ebtables.c +3 -1
index 56b7197f03739..1d850edecd724 100644
@@ -2182,7 +2182,9 @@ static int compat_copy_entries(unsigned char *data, unsigned int size_user,
 	if (ret < 0)
 		return ret;
 
-	WARN_ON(size_remaining);
+	if (size_remaining)
+		return -EINVAL;
+
 	return state->buf_kern_offset;
 }
 
Signature · 1 line
2.20.1
author maintainer
#139 lore raw

PATCH 139/271 pwm: meson: Dont disable PWM when setting duty repeatedly

In reply to Greg Kroah-Hartman

From: Bichao Zheng <[email protected]>

[ Upstream commit a279345807e1e0ae79567a52cfdd9d30c9174a3c ]

There is an abnormally low about 20ms,when setting duty repeatedly. Because setting the duty will disable PWM and then enable. Delete this operation now.

Fixes 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
[ Dropped code instead of hiding it behind a comment ]
---
 drivers/pwm/pwm-meson.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/pwm/pwm-meson.c +0 -5
index f58a4867b5194..a196439ee14c7 100644
@@ -320,11 +320,6 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->period != channel->state.period ||
 	    state->duty_cycle != channel->state.duty_cycle ||
 	    state->polarity != channel->state.polarity) {
-		if (channel->state.enabled) {
-			meson_pwm_disable(meson, pwm->hwpwm);
-			channel->state.enabled = false;
-		}
-
 		if (state->polarity != channel->state.polarity) {
 			if (state->polarity == PWM_POLARITY_NORMAL)
 				meson->inverter_mask |= BIT(pwm->hwpwm);
Signature · 1 line
2.20.1
author maintainer
#140 lore raw

PATCH 140/271 ARM: riscpc: fix lack of keyboard interrupts after irq conversion

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 63a0666bca9311f35017be454587f3ba903644b8 ]

Fix lack of keyboard interrupts for RiscPC due to incorrect conversion.

Fixes e8d36d5dbb6a ("ARM: kill off set_irq_flags usage")
---
 arch/arm/mach-rpc/irq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-rpc/irq.c +2 -1
index 66502e6207fea..fce7fecbd8fa4 100644
@@ -117,7 +117,7 @@ extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, clr, set = 0;
+	unsigned int irq, clr, set;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -129,6 +129,7 @@ void __init rpc_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
+		set = 0;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
 			clr |= IRQ_NOPROBE;
Signature · 1 line
2.20.1
author maintainer
#141 lore raw

PATCH 141/271 kdb: do a sanity check on the cpu in kdb_per_cpu()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit b586627e10f57ee3aa8f0cfab0d6f7dc4ae63760 ]

The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the cpu in a bitmap of online cpus, but if the value is too high then it could read beyond the end of the bitmap and possibly Oops.

Fixes 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
---
 kernel/debug/kdb/kdb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/debug/kdb/kdb_main.c +1 -1
index 5a58421d7e2d7..a52a6da8c3d09 100644
@@ -2632,7 +2632,7 @@ static int kdb_per_cpu(int argc, const char **argv)
 		diag = kdbgetularg(argv[3], &whichcpu);
 		if (diag)
 			return diag;
-		if (!cpu_online(whichcpu)) {
+		if (whichcpu >= nr_cpu_ids || !cpu_online(whichcpu)) {
 			kdb_printf("cpu %ld is not online\n", whichcpu);
 			return KDB_BADCPUNUM;
 		}
Signature · 1 line
2.20.1
author maintainer
#142 lore raw

PATCH 142/271 backlight: lm3630a: Return 0 on success in update_status functions

In reply to Greg Kroah-Hartman

From: Brian Masney <[email protected]>

[ Upstream commit d3f48ec0954c6aac736ab21c34a35d7554409112 ]

lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() both return the brightness value if the brightness was successfully updated. Writing to these attributes via sysfs would cause a 'Bad address' error to be returned. These functions should return 0 on success, so let's change it to correct that error.

Fixes 28e64a68a2ef ("backlight: lm3630: apply chip revision")
---
 drivers/video/backlight/lm3630a_bl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/video/backlight/lm3630a_bl.c +2 -2
index 60d6c2ac87aa5..1771220b2437f 100644
@@ -200,7 +200,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 				      LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access\n");
@@ -277,7 +277,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 				      LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
Signature · 1 line
2.20.1
author maintainer
#143 lore raw

PATCH 143/271 thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power

In reply to Greg Kroah-Hartman

From: Matthias Kaehlcke <[email protected]>

[ Upstream commit bf45ac18b78038e43af3c1a273cae4ab5704d2ce ]

The CPU load values passed to the thermal_power_cpu_get_power tracepoint are zero for all CPUs, unless, unless the thermal_power_cpu_limit tracepoint is enabled too:

irq/41-rockchip-98 [000] .... 290.972410: thermal_power_cpu_get_power:
cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815

vs

irq/41-rockchip-96 [000] .... 95.773585: thermal_power_cpu_get_power:
cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959
irq/41-rockchip-96 [000] .... 95.773596: thermal_power_cpu_limit:
cpus=0000000f freq=408000 cdev_state=10 power=416

There seems to be no good reason for omitting the CPU load information depending on another tracepoint. My guess is that the intention was to check whether thermal_power_cpu_get_power is (still) enabled, however 'load_cpu != NULL' already indicates that it was at least enabled when cpufreq_get_requested_power() was entered, there seems little gain from omitting the assignment if the tracepoint was just disabled, so just remove the check.

Fixes 6828a4711f99 ("thermal: add trace events to the power allocator governor")
---
 drivers/thermal/cpu_cooling.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/cpu_cooling.c +1 -1
index f49d2989d0005..984e5f5141403 100644
@@ -607,7 +607,7 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
 			load = 0;
 
 		total_load += load;
-		if (trace_thermal_power_cpu_limit_enabled() && load_cpu)
+		if (load_cpu)
 			load_cpu[i] = load;
 
 		i++;
Signature · 1 line
2.20.1
author maintainer
#144 lore raw

PATCH 144/271 dmaengine: tegra210-adma: Fix crash during probe

In reply to Greg Kroah-Hartman

From: Jon Hunter <[email protected]>

[ Upstream commit b53611fb1ce9b1786bd18205473e0c1d6bfa8934 ]

Commit f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status") added support to save and restore the DMA channel registers when runtime suspending the ADMA. This change is causing the kernel to crash when probing the ADMA, if the device is probed deferred when looking up the channel interrupts. The crash occurs because not all of the channel base addresses have been setup at this point and in the clean-up path of the probe, pm_runtime_suspend() is called invoking its callback which expects all the channel base addresses to be initialised.

Although this could be fixed by simply checking for a NULL address, on further review of the driver it seems more appropriate that we only call pm_runtime_get_sync() after all the channel interrupts and base addresses have been configured. Therefore, fix this crash by moving the calls to pm_runtime_enable(), pm_runtime_get_sync() and tegra_adma_init() after the DMA channels have been initialised.

Fixes f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status")
---
 drivers/dma/tegra210-adma.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/dma/tegra210-adma.c +13 -13
index 8c3cab463354f..2d4aeba579f75 100644
@@ -744,16 +744,6 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		return PTR_ERR(tdma->ahub_clk);
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0)
-		goto rpm_disable;
-
-	ret = tegra_adma_init(tdma);
-	if (ret)
-		goto rpm_put;
-
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < tdma->nr_channels; i++) {
 		struct tegra_adma_chan *tdc = &tdma->channels[i];
@@ -771,6 +761,16 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		tdc->tdma = tdma;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto rpm_disable;
+
+	ret = tegra_adma_init(tdma);
+	if (ret)
+		goto rpm_put;
+
 	dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
@@ -812,13 +812,13 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 dma_remove:
 	dma_async_device_unregister(&tdma->dma_dev);
-irq_dispose:
-	while (--i >= 0)
-		irq_dispose_mapping(tdma->channels[i].irq);
 rpm_put:
 	pm_runtime_put_sync(&pdev->dev);
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
+irq_dispose:
+	while (--i >= 0)
+		irq_dispose_mapping(tdma->channels[i].irq);
 
 	return ret;
 }
Signature · 1 line
2.20.1
author maintainer
#145 lore raw

PATCH 145/271 spi: spi-fsl-spi: call spi_finalize_current_message() at the end

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

[ Upstream commit 44a042182cb1e9f7916e015c836967bf638b33c4 ]

spi_finalize_current_message() shall be called once all actions are finished, otherwise the last actions might step over a newly started transfer.

Fixes c592becbe704 ("spi: fsl-(e)spi: migrate to generic master queueing")
---
 drivers/spi/spi-fsl-spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-fsl-spi.c +1 -1
index 8b290d9d79350..5419de19859a0 100644
@@ -408,7 +408,6 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
 	}
 
 	m->status = status;
-	spi_finalize_current_message(master);
 
 	if (status || !cs_change) {
 		ndelay(nsecs);
@@ -416,6 +415,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
 	}
 
 	fsl_spi_setup_transfer(spi, NULL);
+	spi_finalize_current_message(master);
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#146 lore raw

PATCH 146/271 crypto: ccp - fix AES CFB error exposed by new test vectors

In reply to Greg Kroah-Hartman

From: Hook, Gary <[email protected]>

[ Upstream commit c3b359d6567c0b8f413e924feb37cf025067d55a ]

Updated testmgr will exhibit this error message when loading the ccp-crypto module:

alg: skcipher: cfb-aes-ccp encryption failed with err -22 on test vector 3, cfg="in-place"

Update the CCP crypto driver to correctly treat CFB as a streaming mode cipher (instead of block mode). Update the configuration for CFB to specify the block size as a single byte;

Fixes 2b789435d7f3 ('crypto: ccp - CCP AES crypto API support')
---
 drivers/crypto/ccp/ccp-crypto-aes.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/crypto/ccp/ccp-crypto-aes.c +4 -4
index 89291c15015cd..3f768699332ba 100644
@@ -1,7 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * AMD Cryptographic Coprocessor (CCP) AES crypto API support
  *
- * Copyright (C) 2013,2016 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2019 Advanced Micro Devices, Inc.
  *
  * Author: Tom Lendacky <[email protected]>
  *
@@ -79,8 +80,7 @@ static int ccp_aes_crypt(struct ablkcipher_request *req, bool encrypt)
 		return -EINVAL;
 
 	if (((ctx->u.aes.mode == CCP_AES_MODE_ECB) ||
-	     (ctx->u.aes.mode == CCP_AES_MODE_CBC) ||
-	     (ctx->u.aes.mode == CCP_AES_MODE_CFB)) &&
+	     (ctx->u.aes.mode == CCP_AES_MODE_CBC)) &&
 	    (req->nbytes & (AES_BLOCK_SIZE - 1)))
 		return -EINVAL;
 
@@ -291,7 +291,7 @@ static struct ccp_aes_def aes_algs[] = {
 		.version	= CCP_VERSION(3, 0),
 		.name		= "cfb(aes)",
 		.driver_name	= "cfb-aes-ccp",
-		.blocksize	= AES_BLOCK_SIZE,
+		.blocksize	= 1,
 		.ivsize		= AES_BLOCK_SIZE,
 		.alg_defaults	= &ccp_aes_defaults,
 	},
Signature · 1 line
2.20.1
author maintainer
#147 lore raw

PATCH 147/271 serial: stm32: fix transmit_chars when tx is stopped

In reply to Greg Kroah-Hartman

From: Erwan Le Ray <[email protected]>

[ Upstream commit b83b957c91f68e53f0dc596e129e8305761f2a32 ]

Disables the tx irq when the transmission is ended and updates stop_tx conditions for code cleanup.

Fixes 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
---
 drivers/tty/serial/stm32-usart.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/tty/serial/stm32-usart.c +3 -8
index 033856287ca21..ea8b591dd46f4 100644
@@ -293,13 +293,8 @@ static void stm32_transmit_chars(struct uart_port *port)
 		return;
 	}
 
-	if (uart_tx_stopped(port)) {
-		stm32_stop_tx(port);
-		return;
-	}
-
-	if (uart_circ_empty(xmit)) {
-		stm32_stop_tx(port);
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 		return;
 	}
 
@@ -312,7 +307,7 @@ static void stm32_transmit_chars(struct uart_port *port)
 		uart_write_wakeup(port);
 
 	if (uart_circ_empty(xmit))
-		stm32_stop_tx(port);
+		stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 }
 
 static irqreturn_t stm32_interrupt(int irq, void *ptr)
Signature · 1 line
2.20.1
author maintainer
#148 lore raw

PATCH 148/271 misc: sgi-xp: Properly initialize buf in xpc_get_rsvd_page_pa

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit b0576f9ecb5c51e9932531d23c447b2739261841 ]

Clang warns:

drivers/misc/sgi-xp/xpc_partition.c:73:14: warning: variable 'buf' is uninitialized when used within its own initialization [-Wuninitialized]

        void *buf = buf;
              ~~~   ^~~

1 warning generated.

Arnd's explanation during review:

/*
* Returns the physical address of the partition's reserved page through
* an iterative number of calls.
*
* On first call, 'cookie' and 'len' should be set to 0, and 'addr'
* set to the nasid of the partition whose reserved page's address is
* being sought.
* On subsequent calls, pass the values, that were passed back on the
* previous call.
*
* While the return status equals SALRET_MORE_PASSES, keep calling
* this function after first copying 'len' bytes starting at 'addr'
* into 'buf'. Once the return status equals SALRET_OK, 'addr' will
* be the physical address of the partition's reserved page. If the
* return status equals neither of these, an error as occurred. */
static inline s64
sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)

so *len is set to zero on the first call and tells the bios how many bytes are accessible at 'buf', and it does get updated by the BIOS to tell us how many bytes it needs, and then we allocate that and try again.

---
 drivers/misc/sgi-xp/xpc_partition.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/sgi-xp/xpc_partition.c +1 -1
index 6956f7e7d4392..ca5f0102daef4 100644
@@ -70,7 +70,7 @@ xpc_get_rsvd_page_pa(int nasid)
 	unsigned long rp_pa = nasid;	/* seed with nasid */
 	size_t len = 0;
 	size_t buf_len = 0;
-	void *buf = buf;
+	void *buf = NULL;
 	void *buf_base = NULL;
 	enum xp_retval (*get_partition_rsvd_page_pa)
 		(void *, u64 *, unsigned long *, size_t *) =
Signature · 1 line
2.20.1
author maintainer
#149 lore raw

PATCH 149/271 iommu: Use right function to get group for device

In reply to Greg Kroah-Hartman

From: Lu Baolu <[email protected]>

[ Upstream commit 57274ea25736496ee019a5c40479855b21888839 ]

The iommu_group_get_for_dev() will allocate a group for a device if it isn't in any group. This isn't the use case in iommu_request_dm_for_dev(). Let's use iommu_group_get() instead.

Fixes d290f1e70d85a ("iommu: Introduce iommu_request_dm_for_dev()")
---
 drivers/iommu/iommu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iommu/iommu.c +3 -3
index 71b89e47e9521..dbcc13efaf3c8 100644
@@ -1582,9 +1582,9 @@ int iommu_request_dm_for_dev(struct device *dev)
 	int ret;
 
 	/* Device must already be in a group before calling this function */
-	group = iommu_group_get_for_dev(dev);
-	if (IS_ERR(group))
-		return PTR_ERR(group);
+	group = iommu_group_get(dev);
+	if (!group)
+		return -EINVAL;
 
 	mutex_lock(&group->mutex);
 
Signature · 1 line
2.20.1
author maintainer
#150 lore raw

PATCH 150/271 signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

In reply to Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 72abe3bcf0911d69b46c1e8bdb5612675e0ac42c ]

The locking in force_sig_info is not prepared to deal with a task that exits or execs (as sighand may change). The is not a locking problem in force_sig as force_sig is only built to handle synchronous exceptions.

Further the function force_sig_info changes the signal state if the signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the delivery of the signal. The signal SIGKILL can not be ignored and can not be blocked and SIGNAL_UNKILLABLE won't prevent it from being delivered.

So using force_sig rather than send_sig for SIGKILL is confusing and pointless.

Because it won't impact the sending of the signal and and because using force_sig is wrong, replace force_sig with send_sig.

Cc Namjae Jeon <[email protected]>
Cc Jeff Layton <[email protected]>
Cc Steve French <[email protected]>
Fixes a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
Fixes e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code")
---
 fs/cifs/connect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/connect.c +1 -1
index e43ba6db2bdd6..110febd697379 100644
@@ -2221,7 +2221,7 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect)
 
 	task = xchg(&server->tsk, NULL);
 	if (task)
-		force_sig(SIGKILL, task);
+		send_sig(SIGKILL, task, 1);
 }
 
 static struct TCP_Server_Info *
Signature · 1 line
2.20.1
author maintainer
#151 lore raw

PATCH 151/271 inet: frags: call inet_frags_fini() after unregister_pernet_subsys()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit ae7352d384a552d8c799c242e74a934809990a71 ]

Both IPv6 and 6lowpan are calling inet_frags_fini() too soon.

inet_frags_fini() is dismantling a kmem_cache, that might be needed later when unregister_pernet_subsys() eventually has to remove frags queues from hash tables and free them.

This fixes potential use-after-free, and is a prereq for the following patch.

Fixes d4ad4d22e7ac ("inet: frags: use kmem_cache for inet_frag_queue")
---
 net/ieee802154/6lowpan/reassembly.c | 2 +-
 net/ipv6/reassembly.c               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
net/ieee802154/6lowpan/reassembly.c +1 -1
index c01df341b5f64..5936bfafb1c43 100644
@@ -633,7 +633,7 @@ err_sysctl:
 
 void lowpan_net_frag_exit(void)
 {
-	inet_frags_fini(&lowpan_frags);
 	lowpan_frags_sysctl_unregister();
 	unregister_pernet_subsys(&lowpan_frags_ops);
+	inet_frags_fini(&lowpan_frags);
 }
net/ipv6/reassembly.c +1 -1
index 4aed9c45a91ad..3f488555999e3 100644
@@ -592,8 +592,8 @@ err_protocol:
 
 void ipv6_frag_exit(void)
 {
-	inet_frags_fini(&ip6_frags);
 	ip6_frags_sysctl_unregister();
 	unregister_pernet_subsys(&ip6_frags_ops);
 	inet6_del_protocol(&frag_protocol, IPPROTO_FRAGMENT);
+	inet_frags_fini(&ip6_frags);
 }
Signature · 1 line
2.20.1
author maintainer
#152 lore raw

PATCH 152/271 media: vivid: fix incorrect assignment operation when setting video mode

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit d4ec9550e4b2d2e357a46fdc65d8ef3d4d15984c ]

The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment, otherwise the previous clearing of the FB_VMODE_MASK bits of var->vmode makes no sense and is redundant.

Addresses-Coverity: ("Unused value")

Fixes ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing")
---
 drivers/media/platform/vivid/vivid-osd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/vivid/vivid-osd.c +1 -1
index bdc380b14e0c4..a95b7c56569e3 100644
@@ -167,7 +167,7 @@ static int _vivid_fb_check_var(struct fb_var_screeninfo *var, struct vivid_dev *
 	var->nonstd = 0;
 
 	var->vmode &= ~FB_VMODE_MASK;
-	var->vmode = FB_VMODE_NONINTERLACED;
+	var->vmode |= FB_VMODE_NONINTERLACED;
 
 	/* Dummy values */
 	var->hsync_len = 24;
Signature · 1 line
2.20.1
author maintainer
#153 lore raw

PATCH 153/271 powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild

In reply to Greg Kroah-Hartman

From: Nathan Lynch <[email protected]>

[ Upstream commit d4aa219a074a5abaf95a756b9f0d190b5c03a945 ]

Allow external callers to force the cacheinfo code to release all its references to cache nodes, e.g. before processing device tree updates post-migration, and to rebuild the hierarchy afterward.

CPU online/offline must be blocked by callers; enforce this.

Fixes 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
---
 arch/powerpc/kernel/cacheinfo.c | 21 +++++++++++++++++++++
 arch/powerpc/kernel/cacheinfo.h |  4 ++++
 2 files changed, 25 insertions(+)
arch/powerpc/kernel/cacheinfo.c +21 -0
index c641983bbdd68..0122d5ce0637d 100644
@@ -867,4 +867,25 @@ void cacheinfo_cpu_offline(unsigned int cpu_id)
 	if (cache)
 		cache_cpu_clear(cache, cpu_id);
 }
+
+void cacheinfo_teardown(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_offline(cpu);
+}
+
+void cacheinfo_rebuild(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_online(cpu);
+}
+
 #endif /* (CONFIG_PPC_PSERIES && CONFIG_SUSPEND) || CONFIG_HOTPLUG_CPU */
arch/powerpc/kernel/cacheinfo.h +4 -0
index a7b74d36acd71..2cdee87a482c5 100644
@@ -5,4 +5,8 @@
 extern void cacheinfo_cpu_online(unsigned int cpu_id);
 extern void cacheinfo_cpu_offline(unsigned int cpu_id);
 
+/* Allow migration/suspend to tear down and rebuild the hierarchy. */
+extern void cacheinfo_teardown(void);
+extern void cacheinfo_rebuild(void);
+
 #endif /* _PPC_CACHEINFO_H */
Signature · 1 line
2.20.1
author maintainer
#154 lore raw

PATCH 154/271 drm/msm/mdp5: Fix mdp5_cfg_init error return

In reply to Greg Kroah-Hartman

From: Jeffrey Hugo <[email protected]>

[ Upstream commit fc19cbb785d7bbd1a1af26229b5240a3ab332744 ]

If mdp5_cfg_init fails because of an unknown major version, a null pointer dereference occurs. This is because the caller of init expects error pointers, but init returns NULL on error. Fix this by returning the expected values on error.

Fixes 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module)
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +1 -1
index 8b4e3004f4518..86b0448d2ce58 100644
@@ -542,7 +542,7 @@ fail:
 	if (cfg_handler)
 		mdp5_cfg_destroy(cfg_handler);
 
-	return NULL;
+	return ERR_PTR(ret);
 }
 
 static struct mdp5_cfg_platform *mdp5_get_config(struct platform_device *dev)
Signature · 1 line
2.20.1
author maintainer
#155 lore raw

PATCH 155/271 net: netem: fix backlog accounting for corrupted GSO frames

In reply to Greg Kroah-Hartman

From: Jakub Kicinski <[email protected]>

[ Upstream commit 177b8007463c4f36c9a2c7ce7aa9875a4cad9bd5 ]

When GSO frame has to be corrupted netem uses skb_gso_segment() to produce the list of frames, and re-enqueues the segments one by one. The backlog length has to be adjusted to account for new frames.

The current calculation is incorrect, leading to wrong backlog lengths in the parent qdisc (both bytes and packets), and incorrect packet backlog count in netem itself.

Parent backlog goes negative, netem's packet backlog counts all non-first segments twice (thus remaining non-zero even after qdisc is emptied).

Move the variables used to count the adjustment into local scope to make 100% sure they aren't used at any stage in backports.

Fixes 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
---
 net/sched/sch_netem.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
net/sched/sch_netem.c +8 -5
index 95002e56fa48b..308d92491757e 100644
@@ -437,8 +437,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct netem_skb_cb *cb;
 	struct sk_buff *skb2;
 	struct sk_buff *segs = NULL;
-	unsigned int len = 0, last_len, prev_len = qdisc_pkt_len(skb);
-	int nb = 0;
+	unsigned int prev_len = qdisc_pkt_len(skb);
 	int count = 1;
 	int rc = NET_XMIT_SUCCESS;
 	int rc_drop = NET_XMIT_DROP;
@@ -495,6 +494,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 			segs = netem_segment(skb, sch, to_free);
 			if (!segs)
 				return rc_drop;
+			qdisc_skb_cb(segs)->pkt_len = segs->len;
 		} else {
 			segs = skb;
 		}
@@ -585,6 +585,11 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 
 finish_segs:
 	if (segs) {
+		unsigned int len, last_len;
+		int nb = 0;
+
+		len = skb->len;
+
 		while (segs) {
 			skb2 = segs->next;
 			segs->next = NULL;
@@ -600,9 +605,7 @@ finish_segs:
 			}
 			segs = skb2;
 		}
-		sch->q.qlen += nb;
-		if (nb > 1)
-			qdisc_tree_reduce_backlog(sch, 1 - nb, prev_len - len);
+		qdisc_tree_reduce_backlog(sch, -nb, prev_len - len);
 	}
 	return NET_XMIT_SUCCESS;
 }
Signature · 1 line
2.20.1
author maintainer
#156 lore raw

PATCH 156/271 net/af_iucv: always register net_device notifier

In reply to Greg Kroah-Hartman

From: Julian Wiedmann <[email protected]>

[ Upstream commit 06996c1d4088a0d5f3e7789d7f96b4653cc947cc ]

Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still open HiperTransport-based connections. For robust operation these connections require the af_iucv_netdev_notifier, so register it unconditionally.

Also handle any error that register_netdevice_notifier() returns.

Fixes 9fbd87d41392 ("af_iucv: handle netdev events")
---
 net/iucv/af_iucv.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)
net/iucv/af_iucv.c +20 -7
index c2dfc32eb9f21..02e10deef5b45 100644
@@ -2431,6 +2431,13 @@ out:
 	return err;
 }
 
+static void afiucv_iucv_exit(void)
+{
+	device_unregister(af_iucv_dev);
+	driver_unregister(&af_iucv_driver);
+	pr_iucv->iucv_unregister(&af_iucv_handler, 0);
+}
+
 static int __init afiucv_init(void)
 {
 	int err;
@@ -2464,11 +2471,18 @@ static int __init afiucv_init(void)
 		err = afiucv_iucv_init();
 		if (err)
 			goto out_sock;
-	} else
-		register_netdevice_notifier(&afiucv_netdev_notifier);
+	}
+
+	err = register_netdevice_notifier(&afiucv_netdev_notifier);
+	if (err)
+		goto out_notifier;
+
 	dev_add_pack(&iucv_packet_type);
 	return 0;
 
+out_notifier:
+	if (pr_iucv)
+		afiucv_iucv_exit();
 out_sock:
 	sock_unregister(PF_IUCV);
 out_proto:
@@ -2482,12 +2496,11 @@ out:
 static void __exit afiucv_exit(void)
 {
 	if (pr_iucv) {
-		device_unregister(af_iucv_dev);
-		driver_unregister(&af_iucv_driver);
-		pr_iucv->iucv_unregister(&af_iucv_handler, 0);
+		afiucv_iucv_exit();
 		symbol_put(iucv_if);
-	} else
-		unregister_netdevice_notifier(&afiucv_netdev_notifier);
+	}
+
+	unregister_netdevice_notifier(&afiucv_netdev_notifier);
 	dev_remove_pack(&iucv_packet_type);
 	sock_unregister(PF_IUCV);
 	proto_unregister(&iucv_proto);
Signature · 1 line
2.20.1
author maintainer
#157 lore raw

PATCH 157/271 ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRs

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit fd14f4436fd47d5418023c90e933e66d3645552e ]

If multiple serializers are connected in the system and the number of channels will need to use more than one serializer the mask to enable the serializers were left to 0 if tdm_mask is provided

Fixes dd55ff8346a97 ("ASoC: davinci-mcasp: Add set_tdm_slots() support")
---
 sound/soc/davinci/davinci-mcasp.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
sound/soc/davinci/davinci-mcasp.c +6 -7
index 624c209c94981..d1935c5c3602b 100644
@@ -882,14 +882,13 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream,
 		active_slots = hweight32(mcasp->tdm_mask[stream]);
 		active_serializers = (channels + active_slots - 1) /
 			active_slots;
-		if (active_serializers == 1) {
+		if (active_serializers == 1)
 			active_slots = channels;
-			for (i = 0; i < total_slots; i++) {
-				if ((1 << i) & mcasp->tdm_mask[stream]) {
-					mask |= (1 << i);
-					if (--active_slots <= 0)
-						break;
-				}
+		for (i = 0; i < total_slots; i++) {
+			if ((1 << i) & mcasp->tdm_mask[stream]) {
+				mask |= (1 << i);
+				if (--active_slots <= 0)
+					break;
 			}
 		}
 	} else {
Signature · 1 line
2.20.1
author maintainer
#158 lore raw

PATCH 158/271 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 3572e8aea3bf925dac1dbf86127657c39fe5c254 ]

Besides the alarm, the PCF8563 also has a timer triggered interrupt. In cases where the previous system left the timer and interrupts on, or somehow the bits got enabled, the interrupt would keep triggering as the kernel doesn't know about it.

Clear both the alarm and timer event flags, and disable the interrupts, before requesting the interrupt line.

Fixes ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support")
Fixes a45d528aab8b ("rtc: pcf8563: clear expired alarm at boot time")
---
 drivers/rtc/rtc-pcf8563.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/rtc/rtc-pcf8563.c +5 -6
index a4b8b603c807d..533fb7027f0cc 100644
@@ -563,7 +563,6 @@ static int pcf8563_probe(struct i2c_client *client,
 	struct pcf8563 *pcf8563;
 	int err;
 	unsigned char buf;
-	unsigned char alm_pending;
 
 	dev_dbg(&client->dev, "%s\n", __func__);
 
@@ -587,13 +586,13 @@ static int pcf8563_probe(struct i2c_client *client,
 		return err;
 	}
 
-	err = pcf8563_get_alarm_mode(client, NULL, &alm_pending);
-	if (err) {
-		dev_err(&client->dev, "%s: read error\n", __func__);
+	/* Clear flags and disable interrupts */
+	buf = 0;
+	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
 		return err;
 	}
-	if (alm_pending)
-		pcf8563_set_alarm_mode(client, 0);
 
 	pcf8563->rtc = devm_rtc_device_register(&client->dev,
 				pcf8563_driver.driver.name,
Signature · 1 line
2.20.1
author maintainer
#159 lore raw

PATCH 159/271 drm/msm/a3xx: remove TPL1 regs from snapshot

In reply to Greg Kroah-Hartman

From: Rob Clark <[email protected]>

[ Upstream commit f47bee2ba447bebc304111c16ef1e1a73a9744dd ]

These regs are write-only, and the hw throws a hissy-fit (ie. reboots) when we try to read them for GPU state snapshot, in response to a GPU hang. It is rather impolite when GPU recovery triggers an insta- reboot, so lets remove the TPL1 registers from the snapshot.

Fixes 7198e6b03155 drm/msm: add a3xx gpu support
---
 drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)
drivers/gpu/drm/msm/adreno/a3xx_gpu.c +11 -13
index fd266ed963b6c..25a0e7d133405 100644
@@ -383,19 +383,17 @@ static const unsigned int a3xx_registers[] = {
 	0x2200, 0x2212, 0x2214, 0x2217, 0x221a, 0x221a, 0x2240, 0x227e,
 	0x2280, 0x228b, 0x22c0, 0x22c0, 0x22c4, 0x22ce, 0x22d0, 0x22d8,
 	0x22df, 0x22e6, 0x22e8, 0x22e9, 0x22ec, 0x22ec, 0x22f0, 0x22f7,
-	0x22ff, 0x22ff, 0x2340, 0x2343, 0x2348, 0x2349, 0x2350, 0x2356,
-	0x2360, 0x2360, 0x2440, 0x2440, 0x2444, 0x2444, 0x2448, 0x244d,
-	0x2468, 0x2469, 0x246c, 0x246d, 0x2470, 0x2470, 0x2472, 0x2472,
-	0x2474, 0x2475, 0x2479, 0x247a, 0x24c0, 0x24d3, 0x24e4, 0x24ef,
-	0x2500, 0x2509, 0x250c, 0x250c, 0x250e, 0x250e, 0x2510, 0x2511,
-	0x2514, 0x2515, 0x25e4, 0x25e4, 0x25ea, 0x25ea, 0x25ec, 0x25ed,
-	0x25f0, 0x25f0, 0x2600, 0x2612, 0x2614, 0x2617, 0x261a, 0x261a,
-	0x2640, 0x267e, 0x2680, 0x268b, 0x26c0, 0x26c0, 0x26c4, 0x26ce,
-	0x26d0, 0x26d8, 0x26df, 0x26e6, 0x26e8, 0x26e9, 0x26ec, 0x26ec,
-	0x26f0, 0x26f7, 0x26ff, 0x26ff, 0x2740, 0x2743, 0x2748, 0x2749,
-	0x2750, 0x2756, 0x2760, 0x2760, 0x300c, 0x300e, 0x301c, 0x301d,
-	0x302a, 0x302a, 0x302c, 0x302d, 0x3030, 0x3031, 0x3034, 0x3036,
-	0x303c, 0x303c, 0x305e, 0x305f,
+	0x22ff, 0x22ff, 0x2340, 0x2343, 0x2440, 0x2440, 0x2444, 0x2444,
+	0x2448, 0x244d, 0x2468, 0x2469, 0x246c, 0x246d, 0x2470, 0x2470,
+	0x2472, 0x2472, 0x2474, 0x2475, 0x2479, 0x247a, 0x24c0, 0x24d3,
+	0x24e4, 0x24ef, 0x2500, 0x2509, 0x250c, 0x250c, 0x250e, 0x250e,
+	0x2510, 0x2511, 0x2514, 0x2515, 0x25e4, 0x25e4, 0x25ea, 0x25ea,
+	0x25ec, 0x25ed, 0x25f0, 0x25f0, 0x2600, 0x2612, 0x2614, 0x2617,
+	0x261a, 0x261a, 0x2640, 0x267e, 0x2680, 0x268b, 0x26c0, 0x26c0,
+	0x26c4, 0x26ce, 0x26d0, 0x26d8, 0x26df, 0x26e6, 0x26e8, 0x26e9,
+	0x26ec, 0x26ec, 0x26f0, 0x26f7, 0x26ff, 0x26ff, 0x2740, 0x2743,
+	0x300c, 0x300e, 0x301c, 0x301d, 0x302a, 0x302a, 0x302c, 0x302d,
+	0x3030, 0x3031, 0x3034, 0x3036, 0x303c, 0x303c, 0x305e, 0x305f,
 	~0   /* sentinel */
 };
 
Signature · 1 line
2.20.1
author maintainer
#160 lore raw

PATCH 160/271 perf/ioctl: Add check for the sample_period value

In reply to Greg Kroah-Hartman

From: Ravi Bangoria <[email protected]>

[ Upstream commit 913a90bc5a3a06b1f04c337320e9aeee2328dd77 ]

perf_event_open() limits the sample_period to 63 bits. See:

0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")

Make ioctl() consistent with it.

Also on PowerPC, negative sample_period could cause a recursive PMIs leading to a hang (reported when running perf-fuzzer).

Cc Alexander Shishkin <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Vince Weaver <[email protected]>
Fixes 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
---
 kernel/events/core.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/events/core.c +3 -0
index 5bbf7537a6121..64ace5e9af2a0 100644
@@ -4624,6 +4624,9 @@ static int perf_event_period(struct perf_event *event, u64 __user *arg)
 	if (perf_event_check_period(event, value))
 		return -EINVAL;
 
+	if (!event->attr.freq && (value & (1ULL << 63)))
+		return -EINVAL;
+
 	event_function_call(event, __perf_event_period, &value);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#161 lore raw

PATCH 161/271 dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit c24a5c735f87d0549060de31367c095e8810b895 ]

The commit

080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")

has been mistakenly submitted. The further investigations show that the original code does better job since the memory side transfer size has never been configured by DMA users.

As per latest revision of documentation: "Channel minimum transfer size (CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and minimum value that can be programmed is 1."

This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16.

Fixes 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")
---
 drivers/dma/hsu/hsu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/hsu/hsu.c +2 -2
index 29d04ca71d52e..15525a2b8ebd7 100644
@@ -64,10 +64,10 @@ static void hsu_dma_chan_start(struct hsu_dma_chan *hsuc)
 
 	if (hsuc->direction == DMA_MEM_TO_DEV) {
 		bsr = config->dst_maxburst;
-		mtsr = config->src_addr_width;
+		mtsr = config->dst_addr_width;
 	} else if (hsuc->direction == DMA_DEV_TO_MEM) {
 		bsr = config->src_maxburst;
-		mtsr = config->dst_addr_width;
+		mtsr = config->src_addr_width;
 	}
 
 	hsu_chan_disable(hsuc);
Signature · 1 line
2.20.1
author maintainer
#162 lore raw

PATCH 162/271 clk: qcom: Fix -Wunused-const-variable

In reply to Greg Kroah-Hartman

From: Nathan Huckleberry <[email protected]>

[ Upstream commit da642427bd7710ec4f4140f693f59aa8521a358c ]

Clang produces the following warning

drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable] static const struct
parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] =
{ ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^ drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^ drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = {

It looks like these were never used.

---
 drivers/clk/qcom/gcc-msm8996.c | 36 ----------------------------------
 1 file changed, 36 deletions(-)
drivers/clk/qcom/gcc-msm8996.c +0 -36
index fe03e6fbc7df5..ea6c227331fcf 100644
@@ -140,22 +140,6 @@ static const char * const gcc_xo_gpll0_gpll4_gpll0_early_div[] = {
 	"gpll0_early_div"
 };
 
-static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] = {
-	{ P_XO, 0 },
-	{ P_GPLL0, 1 },
-	{ P_GPLL2, 2 },
-	{ P_GPLL3, 3 },
-	{ P_GPLL0_EARLY_DIV, 6 }
-};
-
-static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = {
-	"xo",
-	"gpll0",
-	"gpll2",
-	"gpll3",
-	"gpll0_early_div"
-};
-
 static const struct parent_map gcc_xo_gpll0_gpll1_early_div_gpll1_gpll4_gpll0_early_div_map[] = {
 	{ P_XO, 0 },
 	{ P_GPLL0, 1 },
@@ -194,26 +178,6 @@ static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll2_early_gpll0_early
 	"gpll0_early_div"
 };
 
-static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = {
-	{ P_XO, 0 },
-	{ P_GPLL0, 1 },
-	{ P_GPLL2, 2 },
-	{ P_GPLL3, 3 },
-	{ P_GPLL1, 4 },
-	{ P_GPLL4, 5 },
-	{ P_GPLL0_EARLY_DIV, 6 }
-};
-
-static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = {
-	"xo",
-	"gpll0",
-	"gpll2",
-	"gpll3",
-	"gpll1",
-	"gpll4",
-	"gpll0_early_div"
-};
-
 static struct clk_fixed_factor xo = {
 	.mult = 1,
 	.div = 1,
Signature · 1 line
2.20.1
author maintainer
#163 lore raw

PATCH 163/271 iommu/amd: Make iommu_disable safer

In reply to Greg Kroah-Hartman

From: Kevin Mitchell <[email protected]>

[ Upstream commit 3ddbe913e55516d3e2165d43d4d5570761769878 ]

Make it safe to call iommu_disable during early init error conditions before mmio_base is set, but after the struct amd_iommu has been added to the amd_iommu_list. For example, this happens if firmware fails to fill in mmio_phys in the ACPI table leading to a NULL pointer dereference in iommu_feature_disable.

Fixes 2c0ae1720c09c ('iommu/amd: Convert iommu initialization to state machine')
---
 drivers/iommu/amd_iommu_init.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/iommu/amd_iommu_init.c +3 -0
index 9bb8d64b6f947..c113e46fdc3ab 100644
@@ -383,6 +383,9 @@ static void iommu_enable(struct amd_iommu *iommu)
 
 static void iommu_disable(struct amd_iommu *iommu)
 {
+	if (!iommu->mmio_base)
+		return;
+
 	/* Disable command buffer */
 	iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
 
Signature · 1 line
2.20.1
author maintainer
#164 lore raw

PATCH 164/271 mfd: intel-lpss: Release IDA resources

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 02f36911c1b41fcd8779fa0c135aab0554333fa5 ]

ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit().

Fixes 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
---
 drivers/mfd/intel-lpss.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/intel-lpss.c +1 -0
index 22dd8c055048c..71cecd7aeea0c 100644
@@ -533,6 +533,7 @@ module_init(intel_lpss_init);
 
 static void __exit intel_lpss_exit(void)
 {
+	ida_destroy(&intel_lpss_devid_ida);
 	debugfs_remove(intel_lpss_debugfs);
 }
 module_exit(intel_lpss_exit);
Signature · 1 line
2.20.1
author maintainer
#165 lore raw

PATCH 165/271 rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 3427beb6375d04e9627c67343872e79341a684ea ]

With gcc 4.1:

net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function

Indeed, if the first jump to the send_fragmentable label is made, and the address family is not handled in the switch() statement, ret will be used uninitialized.

Fix this by BUG()'ing as is done in other places in rxrpc where internal support for future address families will need adding. It should not be possible to reach this normally as the address families are checked up-front.

Fixes 5a924b8951f835b5 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
---
 net/rxrpc/output.c | 3 +++
 1 file changed, 3 insertions(+)
net/rxrpc/output.c +3 -0
index 59d3286033120..64389f493bb28 100644
@@ -400,6 +400,9 @@ send_fragmentable:
 		}
 		break;
 #endif
+
+	default:
+		BUG();
 	}
 
 	up_write(&conn->params.local->defrag_sem);
Signature · 1 line
2.20.1
author maintainer
#166 lore raw

PATCH 166/271 devres: allow const resource arguments

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 9dea44c91469512d346e638694c22c30a5273992 ]

devm_ioremap_resource() does not currently take 'const' arguments, which results in a warning from the first driver trying to do it anyway:

drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

  priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
                                                 ^~~~~~~~~~~~~~~~~~~

Change the prototype to allow it, as there is no real reason not to.

---
 include/linux/device.h | 3 ++-
 lib/devres.c           | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
include/linux/device.h +2 -1
index 8d732965fab77..eb865b461acc4 100644
@@ -682,7 +682,8 @@ extern unsigned long devm_get_free_pages(struct device *dev,
 					 gfp_t gfp_mask, unsigned int order);
 extern void devm_free_pages(struct device *dev, unsigned long addr);
 
-void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);
+void __iomem *devm_ioremap_resource(struct device *dev,
+				    const struct resource *res);
 
 /* allows to add/remove a custom action to devres stack */
 int devm_add_action(struct device *dev, void (*action)(void *), void *data);
lib/devres.c +2 -1
index cb1464c411a2b..38912892053c0 100644
@@ -131,7 +131,8 @@ EXPORT_SYMBOL(devm_iounmap);
  *	if (IS_ERR(base))
  *		return PTR_ERR(base);
  */
-void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res)
+void __iomem *devm_ioremap_resource(struct device *dev,
+				    const struct resource *res)
 {
 	resource_size_t size;
 	const char *name;
Signature · 1 line
2.20.1
author maintainer
#167 lore raw

PATCH 167/271 RDMA/hns: Fixs hw access invalid dma memory error

In reply to Greg Kroah-Hartman

From: Xi Wang <[email protected]>

[ Upstream commit ec5bc2cc69b4fc494e04d10fc5226f6f9cf67c56 ]

When smmu is enable, if execute the perftest command and then use 'kill -9' to exit, follow this operation repeatedly, the kernel will have a high probability to print the following smmu event:

arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:

  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the next reset.

This patch fixed it by removing the action that release qpc memory in the 'hns_roce_qp_free' function.

Fixes 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
---
 drivers/infiniband/hw/hns/hns_roce_qp.c | 1 -
 1 file changed, 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_qp.c +0 -1
index 33cf1035030b5..6f3c0ea99dd05 100644
@@ -241,7 +241,6 @@ void hns_roce_qp_free(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp)
 
 	if ((hr_qp->ibqp.qp_type) != IB_QPT_GSI) {
 		hns_roce_table_put(hr_dev, &qp_table->irrl_table, hr_qp->qpn);
-		hns_roce_table_put(hr_dev, &qp_table->qp_table, hr_qp->qpn);
 	}
 }
 
Signature · 1 line
2.20.1
author maintainer
#168 lore raw

PATCH 168/271 net: pasemi: fix an use-after-free in pasemi_mac_phy_init()

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

[ Upstream commit faf5577f2498cea23011b5c785ef853ded22700b ]

The phy_dn variable is still being used in of_phy_connect() after the of_node_put() call, which may result in use-after-free.

Fixes 1dd2d06c0459 ("net: Rework pasemi_mac driver to use of_mdio infrastructure")
Cc "David S. Miller" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Luis Chamberlain <[email protected]>
Cc Michael Ellerman <[email protected]>
---
 drivers/net/ethernet/pasemi/pasemi_mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/pasemi/pasemi_mac.c +1 -1
index 2f4a837f0d6ad..dcd56ac687482 100644
@@ -1053,7 +1053,6 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 
 	dn = pci_device_to_OF_node(mac->pdev);
 	phy_dn = of_parse_phandle(dn, "phy-handle", 0);
-	of_node_put(phy_dn);
 
 	mac->link = 0;
 	mac->speed = 0;
@@ -1062,6 +1061,7 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 	phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0,
 				PHY_INTERFACE_MODE_SGMII);
 
+	of_node_put(phy_dn);
 	if (!phydev) {
 		printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
 		return -ENODEV;
Signature · 1 line
2.20.1
author maintainer
#169 lore raw

PATCH 169/271 scsi: libfc: fix null pointer dereference on a null lport

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 41a6bf6529edd10a6def42e3b2c34a7474bcc2f5 ]

Currently if lport is null then the null lport pointer is dereference when printing out debug via the FC_LPORT_DB macro. Fix this by using the more generic FC_LIBFC_DBG debug macro instead that does not use lport.

Addresses-Coverity: ("Dereference after null check")

Fixes 7414705ea4ae ("libfc: Add runtime debugging with debug_logging module parameter")
---
 drivers/scsi/libfc/fc_exch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/libfc/fc_exch.c +1 -1
index 16ca31ad5ec0a..d0a86ef806522 100644
@@ -2506,7 +2506,7 @@ void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
 
 	/* lport lock ? */
 	if (!lport || lport->state == LPORT_ST_DISABLED) {
-		FC_LPORT_DBG(lport, "Receiving frames for an lport that "
+		FC_LIBFC_DBG("Receiving frames for an lport that "
 			     "has not been initialized correctly\n");
 		fc_frame_free(fp);
 		return;
Signature · 1 line
2.20.1
author maintainer
#170 lore raw

PATCH 170/271 libertas_tf: Use correct channel range in lbtf_geo_init

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 2ec4ad49b98e4a14147d04f914717135eca7c8b1 ]

It seems we should use 'range' instead of 'priv->range' in lbtf_geo_init(), because 'range' is the corret one related to current regioncode.

Fixes 691cdb49388b ("libertas_tf: command helper functions for libertas_tf")
---
 drivers/net/wireless/marvell/libertas_tf/cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/marvell/libertas_tf/cmd.c +1 -1
index 909ac3685010f..2b193f1257a5a 100644
@@ -69,7 +69,7 @@ static void lbtf_geo_init(struct lbtf_private *priv)
 			break;
 		}
 
-	for (ch = priv->range.start; ch < priv->range.end; ch++)
+	for (ch = range->start; ch < range->end; ch++)
 		priv->channels[CHAN_TO_IDX(ch)].flags = 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#171 lore raw

PATCH 171/271 qed: reduce maximum stack frame size

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 7c116e02a4a7575c8c62bfd2106e3e3ec8fb99dc ]

clang warns about an overly large stack frame in one function when it decides to inline all __qed_get_vport_*() functions into __qed_get_vport_stats():

drivers/net/ethernet/qlogic/qed/qed_l2.c:1889:13: error: stack frame size of 1128 bytes in function '_qed_get_vport_stats' [-Werror,-Wframe-larger-than=]

Use a noinline_for_stack annotation to prevent clang from inlining these, which keeps the maximum stack usage at around half of that in the worst case, similar to what we get with gcc.

Fixes 86622ee75312 ("qed: Move statistics to L2 code")
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 34 +++++++++++-------------
 1 file changed, 15 insertions(+), 19 deletions(-)
drivers/net/ethernet/qlogic/qed/qed_l2.c +15 -19
index 715776e2cfe50..2d198f6ee21d9 100644
@@ -1328,10 +1328,9 @@ static void __qed_get_vport_pstats_addrlen(struct qed_hwfn *p_hwfn,
 	}
 }
 
-static void __qed_get_vport_pstats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack void
+__qed_get_vport_pstats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct eth_pstorm_per_queue_stat pstats;
 	u32 pstats_addr = 0, pstats_len = 0;
@@ -1351,10 +1350,9 @@ static void __qed_get_vport_pstats(struct qed_hwfn *p_hwfn,
 	p_stats->tx_err_drop_pkts += HILO_64_REGPAIR(pstats.error_drop_pkts);
 }
 
-static void __qed_get_vport_tstats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack void
+__qed_get_vport_tstats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct tstorm_per_port_stat tstats;
 	u32 tstats_addr, tstats_len;
@@ -1397,10 +1395,9 @@ static void __qed_get_vport_ustats_addrlen(struct qed_hwfn *p_hwfn,
 	}
 }
 
-static void __qed_get_vport_ustats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack
+void __qed_get_vport_ustats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			    struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct eth_ustorm_per_queue_stat ustats;
 	u32 ustats_addr = 0, ustats_len = 0;
@@ -1436,10 +1433,9 @@ static void __qed_get_vport_mstats_addrlen(struct qed_hwfn *p_hwfn,
 	}
 }
 
-static void __qed_get_vport_mstats(struct qed_hwfn *p_hwfn,
-				   struct qed_ptt *p_ptt,
-				   struct qed_eth_stats *p_stats,
-				   u16 statistics_bin)
+static noinline_for_stack void
+__qed_get_vport_mstats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_eth_stats *p_stats, u16 statistics_bin)
 {
 	struct eth_mstorm_per_queue_stat mstats;
 	u32 mstats_addr = 0, mstats_len = 0;
@@ -1463,9 +1459,9 @@ static void __qed_get_vport_mstats(struct qed_hwfn *p_hwfn,
 		HILO_64_REGPAIR(mstats.tpa_coalesced_bytes);
 }
 
-static void __qed_get_vport_port_stats(struct qed_hwfn *p_hwfn,
-				       struct qed_ptt *p_ptt,
-				       struct qed_eth_stats *p_stats)
+static noinline_for_stack void
+__qed_get_vport_port_stats(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			   struct qed_eth_stats *p_stats)
 {
 	struct port_stats port_stats;
 	int j;
Signature · 1 line
2.20.1
author maintainer
#172 lore raw

PATCH 172/271 usb: host: xhci-hub: fix extra endianness conversion

In reply to Greg Kroah-Hartman

From: Ruslan Bilovol <[email protected]>

[ Upstream commit 6269e4c76eacabaea0d0099200ae1a455768d208 ]

Don't do extra cpu_to_le32 conversion for put_unaligned_le32 because it is already implemented in this function.

Fixes sparse error:
xhci-hub.c:1152:44: warning: incorrect type in argument 1 (different base types)
xhci-hub.c:1152:44: expected unsigned int [usertype] val
xhci-hub.c:1152:44: got restricted __le32 [usertype]

Fixes 395f540 "xhci: support new USB 3.1 hub request to get extended port status"
Cc Mathias Nyman <[email protected]>
---
 drivers/usb/host/xhci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/xhci-hub.c +1 -1
index 5cf5f3d9c1e59..04d36fa607342 100644
@@ -989,7 +989,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			}
 			port_li = readl(port_array[wIndex] + PORTLI);
 			status = xhci_get_ext_port_status(temp, port_li);
-			put_unaligned_le32(cpu_to_le32(status), &buf[4]);
+			put_unaligned_le32(status, &buf[4]);
 		}
 		break;
 	case SetPortFeature:
Signature · 1 line
2.20.1
author maintainer
#173 lore raw

PATCH 173/271 mic: avoid statically declaring a struct device.

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit bc83f79bd2119230888fb8574639d5a51b38f903 ]

Generally, declaring a platform device as a static variable is a bad idea and can cause all kinds of problems, in particular with the DMA configuration and lifetime rules.

A specific problem we hit here is from a bug in clang that warns about certain (otherwise valid) macros when used in static variables:

drivers/misc/mic/card/mic_x100.c:285:27: warning: shift count >= width of type [-Wshift-count-overflow]

static u64 mic_dma_mask = DMA_BIT_MASK(64);
                          ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                     ^ ~~~

A slightly better way here is to create the platform device dynamically and set the dma mask in the probe function.
This avoids the warning and some other problems, but is still not ideal because the device creation should really be separated from the driver, and the fact that the device has no parent means we have to force the dma mask rather than having it set up from the bus that the device is actually on.

Fixes dd8d8d44df64 ("misc: mic: MIC card driver specific changes to enable SCIF")
---
 drivers/misc/mic/card/mic_x100.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/misc/mic/card/mic_x100.c +12 -16
index b9f0710ffa6b0..4007adc666f37 100644
@@ -249,6 +249,9 @@ static int __init mic_probe(struct platform_device *pdev)
 	mdrv->dev = &pdev->dev;
 	snprintf(mdrv->name, sizeof(mic_driver_name), mic_driver_name);
 
+	/* FIXME: use dma_set_mask_and_coherent() and check result */
+	dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+
 	mdev->mmio.pa = MIC_X100_MMIO_BASE;
 	mdev->mmio.len = MIC_X100_MMIO_LEN;
 	mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE,
@@ -294,18 +297,6 @@ static void mic_platform_shutdown(struct platform_device *pdev)
 	mic_remove(pdev);
 }
 
-static u64 mic_dma_mask = DMA_BIT_MASK(64);
-
-static struct platform_device mic_platform_dev = {
-	.name = mic_driver_name,
-	.id   = 0,
-	.num_resources = 0,
-	.dev = {
-		.dma_mask = &mic_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-	},
-};
-
 static struct platform_driver __refdata mic_platform_driver = {
 	.probe = mic_probe,
 	.remove = mic_remove,
@@ -315,6 +306,8 @@ static struct platform_driver __refdata mic_platform_driver = {
 	},
 };
 
+static struct platform_device *mic_platform_dev;
+
 static int __init mic_init(void)
 {
 	int ret;
@@ -328,9 +321,12 @@ static int __init mic_init(void)
 
 	request_module("mic_x100_dma");
 	mic_init_card_debugfs();
-	ret = platform_device_register(&mic_platform_dev);
+
+	mic_platform_dev = platform_device_register_simple(mic_driver_name,
+							   0, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(mic_platform_dev);
 	if (ret) {
-		pr_err("platform_device_register ret %d\n", ret);
+		pr_err("platform_device_register_full ret %d\n", ret);
 		goto cleanup_debugfs;
 	}
 	ret = platform_driver_register(&mic_platform_driver);
@@ -341,7 +337,7 @@ static int __init mic_init(void)
 	return ret;
 
 device_unregister:
-	platform_device_unregister(&mic_platform_dev);
+	platform_device_unregister(mic_platform_dev);
 cleanup_debugfs:
 	mic_exit_card_debugfs();
 done:
@@ -351,7 +347,7 @@ done:
 static void __exit mic_exit(void)
 {
 	platform_driver_unregister(&mic_platform_driver);
-	platform_device_unregister(&mic_platform_dev);
+	platform_device_unregister(mic_platform_dev);
 	mic_exit_card_debugfs();
 }
 
Signature · 1 line
2.20.1
author maintainer
#174 lore raw

PATCH 174/271 x86/kgbd: Use NMI_VECTOR not APIC_DM_NMI

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit 2591bc4e8d70b4e1330d327fb7e3921f4e070a51 ]

apic->send_IPI_allbutself() takes a vector number as argument.

APIC_DM_NMI is clearly not a vector number. It's defined to 0x400 which is outside the vector space.

Use NMI_VECTOR instead as that's what it is intended to be.

---
 arch/x86/kernel/kgdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/kgdb.c +1 -1
index 8e36f249646e2..904e18bb38c52 100644
@@ -438,7 +438,7 @@ static void kgdb_disable_hw_debug(struct pt_regs *regs)
  */
 void kgdb_roundup_cpus(unsigned long flags)
 {
-	apic->send_IPI_allbutself(APIC_DM_NMI);
+	apic->send_IPI_allbutself(NMI_VECTOR);
 }
 #endif
 
Signature · 1 line
2.20.1
author maintainer
#175 lore raw

PATCH 175/271 ALSA: aoa: onyx: always initialize register read value

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit f474808acb3c4b30552d9c59b181244e0300d218 ]

A lot of places in the driver use onyx_read_register() without checking the return value, and it's been working OK for ~10 years or so, so probably never fails ... Rather than trying to check the return value everywhere, which would be relatively intrusive, at least make sure we don't use an uninitialized value.

Fixes f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
---
 sound/aoa/codecs/onyx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
sound/aoa/codecs/onyx.c +3 -1
index a04edff8b729e..ae50d59fb810f 100644
@@ -74,8 +74,10 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
 		return 0;
 	}
 	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
-	if (v < 0)
+	if (v < 0) {
+		*value = 0;
 		return -1;
+	}
 	*value = (u8)v;
 	onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#176 lore raw

PATCH 176/271 net/mlx5: Fix mlx5_ifc_query_lag_out_bits

In reply to Greg Kroah-Hartman

From: Mark Zhang <[email protected]>

[ Upstream commit ea77388b02270b0af8dc57f668f311235ea068f0 ]

Remove the "reserved_at_40" field to match the device specification.

Fixes 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG")
---
 include/linux/mlx5/mlx5_ifc.h | 2 --
 1 file changed, 2 deletions(-)
include/linux/mlx5/mlx5_ifc.h +0 -2
index 20ee90c47cd50..6dd276227217e 100644
@@ -7909,8 +7909,6 @@ struct mlx5_ifc_query_lag_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
-
 	struct mlx5_ifc_lagc_bits ctx;
 };
 
Signature · 1 line
2.20.1
author maintainer
#177 lore raw

PATCH 177/271 cifs: fix rmmod regression in cifs.ko caused by force_sig changes

In reply to Greg Kroah-Hartman

From: Steve French <[email protected]>

[ Upstream commit 247bc9470b1eeefc7b58cdf2c39f2866ba651509 ]

Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

The global change from force_sig caused module unloading of cifs.ko to fail (since the cifsd process could not be killed, "rmmod cifs" now would always fail)

---
 fs/cifs/connect.c | 1 +
 1 file changed, 1 insertion(+)
fs/cifs/connect.c +1 -0
index 110febd697379..7d46025d5e899 100644
@@ -885,6 +885,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
+	allow_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
Signature · 1 line
2.20.1
author maintainer
#178 lore raw

PATCH 178/271 crypto: caam - free resources in case caam_rng registration failed

In reply to Greg Kroah-Hartman

From: Iuliana Prodan <[email protected]>

[ Upstream commit c59a1d41672a89b5cac49db1a472ff889e35a2d2 ]

Check the return value of the hardware registration for caam_rng and free resources in case of failure.

Fixes e24f7c9e87d4 ("crypto: caam - hwrng support")
---
 drivers/crypto/caam/caamrng.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/crypto/caam/caamrng.c +4 -1
index 9b92af2c72412..a77319bf221d8 100644
@@ -361,7 +361,10 @@ static int __init caam_rng_init(void)
 		goto free_rng_ctx;
 
 	dev_info(dev, "registering rng-caam\n");
-	return hwrng_register(&caam_rng);
+
+	err = hwrng_register(&caam_rng);
+	if (!err)
+		return err;
 
 free_rng_ctx:
 	kfree(rng_ctx);
Signature · 1 line
2.20.1
author maintainer
#179 lore raw

PATCH 179/271 ext4: set error return correctly when ext4_htree_store_dirent fails

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 7a14826ede1d714f0bb56de8167c0e519041eeda ]

Currently when the call to ext4_htree_store_dirent fails the error return variable 'ret' is is not being set to the error code and variable count is instead, hence the error code is not being returned. Fix this by assigning ret to the error return code.

Addresses-Coverity: ("Unused value")

Fixes 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index")
---
 fs/ext4/inline.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ext4/inline.c +1 -1
index 9a13f86fed626..4df4d31057b36 100644
@@ -1417,7 +1417,7 @@ int htree_inlinedir_to_tree(struct file *dir_file,
 		err = ext4_htree_store_dirent(dir_file, hinfo->hash,
 					      hinfo->minor_hash, de, &tmp_str);
 		if (err) {
-			count = err;
+			ret = err;
 			goto out;
 		}
 		count++;
Signature · 1 line
2.20.1
author maintainer
#180 lore raw

PATCH 180/271 ASoC: es8328: Fix copy-paste error in es8328_right_line_controls

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 630742c296341a8cfe00dfd941392025ba8dd4e8 ]

It seems 'es8328_rline_enum' should be used
in es8328_right_line_controls

Fixes 567e4f98922c ("ASoC: add es8328 codec driver")
---
 sound/soc/codecs/es8328.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/es8328.c +1 -1
index 37722194b107e..6b22700842e26 100644
@@ -234,7 +234,7 @@ static const struct soc_enum es8328_rline_enum =
 			      ARRAY_SIZE(es8328_line_texts),
 			      es8328_line_texts);
 static const struct snd_kcontrol_new es8328_right_line_controls =
-	SOC_DAPM_ENUM("Route", es8328_lline_enum);
+	SOC_DAPM_ENUM("Route", es8328_rline_enum);
 
 /* Left Mixer */
 static const struct snd_kcontrol_new es8328_left_mixer_controls[] = {
Signature · 1 line
2.20.1
author maintainer
#181 lore raw

PATCH 181/271 ASoC: cs4349: Use PM ops cs4349_runtime_pm

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 9b4275c415acca6264a3d7f1182589959c93d530 ]

sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]

cs4349_runtime_pm ops already defined, it seems we should enable it.

Fixes e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
---
 sound/soc/codecs/cs4349.c | 1 +
 1 file changed, 1 insertion(+)
sound/soc/codecs/cs4349.c +1 -0
index 231ca935cdf3b..c232c42ccead0 100644
@@ -380,6 +380,7 @@ static struct i2c_driver cs4349_i2c_driver = {
 	.driver = {
 		.name		= "cs4349",
 		.of_match_table	= cs4349_of_match,
+		.pm = &cs4349_runtime_pm,
 	},
 	.id_table	= cs4349_i2c_id,
 	.probe		= cs4349_i2c_probe,
Signature · 1 line
2.20.1
author maintainer
#182 lore raw

PATCH 182/271 ASoC: wm8737: Fix copy-paste error in wm8737_snd_controls

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 554b75bde64bcad9662530726d1483f7ef012069 ]

sound/soc/codecs/wm8737.c:112:29: warning:
high_3d defined but not used [-Wunused-const-variable=]

'high_3d' should be used for 3D High Cut-off.

---
 sound/soc/codecs/wm8737.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/wm8737.c +1 -1
index f0cb1c4afe3ce..c5a8d758f58b8 100644
@@ -170,7 +170,7 @@ SOC_DOUBLE("Polarity Invert Switch", WM8737_ADC_CONTROL, 5, 6, 1, 0),
 SOC_SINGLE("3D Switch", WM8737_3D_ENHANCE, 0, 1, 0),
 SOC_SINGLE("3D Depth", WM8737_3D_ENHANCE, 1, 15, 0),
 SOC_ENUM("3D Low Cut-off", low_3d),
-SOC_ENUM("3D High Cut-off", low_3d),
+SOC_ENUM("3D High Cut-off", high_3d),
 SOC_SINGLE_TLV("3D ADC Volume", WM8737_3D_ENHANCE, 7, 1, 1, adc_tlv),
 
 SOC_SINGLE("Noise Gate Switch", WM8737_NOISE_GATE, 0, 1, 0),
Signature · 1 line
2.20.1
author maintainer
#183 lore raw

PATCH 183/271 signal: Allow cifs and drbd to receive their terminating signals

In reply to Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")
---
 drivers/block/drbd/drbd_main.c |  2 ++
 fs/cifs/connect.c              |  2 +-
 include/linux/signal.h         | 15 ++++++++++++++-
 kernel/signal.c                |  5 +++++
 4 files changed, 22 insertions(+), 2 deletions(-)
drivers/block/drbd/drbd_main.c +2 -0
index f5c24459fc5c1..daa9cef96ec66 100644
@@ -332,6 +332,8 @@ static int drbd_thread_setup(void *arg)
 		 thi->name[0],
 		 resource->name);
 
+	allow_kernel_signal(DRBD_SIGKILL);
+	allow_kernel_signal(SIGXCPU);
 restart:
 	retval = thi->function(thi);
 
fs/cifs/connect.c +1 -1
index 7d46025d5e899..751bdde6515d5 100644
@@ -885,7 +885,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
-	allow_signal(SIGKILL);
+	allow_kernel_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
include/linux/signal.h +14 -1
index 5308304993bea..ffa58ff53e225 100644
@@ -313,6 +313,9 @@ extern void signal_setup_done(int failed, struct ksignal *ksig, int stepping);
 extern void exit_signals(struct task_struct *tsk);
 extern void kernel_sigaction(int, __sighandler_t);
 
+#define SIG_KTHREAD ((__force __sighandler_t)2)
+#define SIG_KTHREAD_KERNEL ((__force __sighandler_t)3)
+
 static inline void allow_signal(int sig)
 {
 	/*
@@ -320,7 +323,17 @@ static inline void allow_signal(int sig)
 	 * know it'll be handled, so that they don't get converted to
 	 * SIGKILL or just silently dropped.
 	 */
-	kernel_sigaction(sig, (__force __sighandler_t)2);
+	kernel_sigaction(sig, SIG_KTHREAD);
+}
+
+static inline void allow_kernel_signal(int sig)
+{
+	/*
+	 * Kernel threads handle their own signals. Let the signal code
+	 * know signals sent by the kernel will be handled, so that they
+	 * don't get silently dropped.
+	 */
+	kernel_sigaction(sig, SIG_KTHREAD_KERNEL);
 }
 
 static inline void disallow_signal(int sig)
kernel/signal.c +5 -0
index 30914b3c76b21..57fadbe69c2e6 100644
@@ -79,6 +79,11 @@ static int sig_task_ignored(struct task_struct *t, int sig, bool force)
 	    handler == SIG_DFL && !(force && sig_kernel_only(sig)))
 		return 1;
 
+	/* Only allow kernel generated signals to this kthread */
+	if (unlikely((t->flags & PF_KTHREAD) &&
+		     (handler == SIG_KTHREAD_KERNEL) && !force))
+		return true;
+
 	return sig_handler_ignored(handler, sig);
 }
 
Signature · 1 line
2.20.1
#184 lore raw

Re: [PATCH 4.9 183/271] signal: Allow cifs and drbd to receive their terminating signals

Quoted 31 lines · Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Quoted 8 lines
Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

These two commits come with that release, but...

Quoted 2 lines
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")

...these two commits not and were never added to 4.9.y.

Are these both really not needed?

Thomas

Quoted 85 lines

---

drivers/block/drbd/drbd_main.c |  2 ++
fs/cifs/connect.c              |  2 +-
include/linux/signal.h         | 15 ++++++++++++++-
kernel/signal.c                |  5 +++++
4 files changed, 22 insertions(+), 2 deletions(-)
drivers/block/drbd/drbd_main.c +2 -0
index f5c24459fc5c1..daa9cef96ec66 100644
@@ -332,6 +332,8 @@ static int drbd_thread_setup(void *arg)
 		 thi->name[0],
 		 resource->name);
 
+	allow_kernel_signal(DRBD_SIGKILL);
+	allow_kernel_signal(SIGXCPU);

restart:

	retval = thi->function(thi);
fs/cifs/connect.c +1 -1
index 7d46025d5e899..751bdde6515d5 100644
@@ -885,7 +885,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
-	allow_signal(SIGKILL);
+	allow_kernel_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
include/linux/signal.h +14 -1
index 5308304993bea..ffa58ff53e225 100644
@@ -313,6 +313,9 @@ extern void signal_setup_done(int failed, struct ksignal *ksig, int stepping);
 extern void exit_signals(struct task_struct *tsk);
 extern void kernel_sigaction(int, __sighandler_t);
 
+#define SIG_KTHREAD ((__force __sighandler_t)2)
+#define SIG_KTHREAD_KERNEL ((__force __sighandler_t)3)
+
 static inline void allow_signal(int sig)
 {
 	/*
@@ -320,7 +323,17 @@ static inline void allow_signal(int sig)
 	 * know it'll be handled, so that they don't get converted to
 	 * SIGKILL or just silently dropped.
 	 */
-	kernel_sigaction(sig, (__force __sighandler_t)2);
+	kernel_sigaction(sig, SIG_KTHREAD);
+}
+
+static inline void allow_kernel_signal(int sig)
+{
+	/*
+	 * Kernel threads handle their own signals. Let the signal code
+	 * know signals sent by the kernel will be handled, so that they
+	 * don't get silently dropped.
+	 */
+	kernel_sigaction(sig, SIG_KTHREAD_KERNEL);
 }
 
 static inline void disallow_signal(int sig)
kernel/signal.c +5 -0
index 30914b3c76b21..57fadbe69c2e6 100644
@@ -79,6 +79,11 @@ static int sig_task_ignored(struct task_struct *t, int sig, bool force)
 	    handler == SIG_DFL && !(force && sig_kernel_only(sig)))
 		return 1;
 
+	/* Only allow kernel generated signals to this kthread */
+	if (unlikely((t->flags & PF_KTHREAD) &&
+		     (handler == SIG_KTHREAD_KERNEL) && !force))
+		return true;
+
 	return sig_handler_ignored(handler, sig);
 }
 
author maintainer
#185 lore raw

Re: [PATCH 4.9 183/271] signal: Allow cifs and drbd to receive their terminating signals

Quoted 42 lines · Thomas Voegtle
Quoted 31 lines · Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Quoted 8 lines
Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Quoted 8 lines

These two commits come with that release, but...

Quoted 2 lines
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")

...these two commits not and were never added to 4.9.y.

Are these both really not needed?

I don't think so, do you feel otherwise?

thanks,

greg k-h

maintainer
#186 lore raw

Re: [PATCH 4.9 183/271] signal: Allow cifs and drbd to receive their terminating signals

Quoted 45 lines · Greg Kroah-Hartman
Quoted 44 lines · Thomas Voegtle
Quoted 31 lines · Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Quoted 8 lines
Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

These two commits come with that release, but...

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")

...these two commits not and were never added to 4.9.y.

Are these both really not needed?

I don't think so, do you feel otherwise?

Both of those commits read as a cleanup to me. I've actually slightly modified to patch to not need those commits (they were less than trivial to backport as is).

Signature · 2 lines
Thanks,
Sasha
#187 lore raw

Re: [PATCH 4.9 183/271] signal: Allow cifs and drbd to receive their terminating signals

Quoted 51 lines · Sasha Levin
Quoted 50 lines · Greg Kroah-Hartman
Quoted 49 lines · Thomas Voegtle
Quoted 31 lines · Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Quoted 8 lines
Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

These two commits come with that release, but...

Quoted 2 lines
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")

...these two commits not and were never added to 4.9.y.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Are these both really not needed?

I don't think so, do you feel otherwise?

Both of those commits read as a cleanup to me. I've actually slightly modified to patch to not need those commits (they were less than trivial to backport as is).

All of these changes were cleanup. Which is why I didn't tag any of them for stable.

Not to say that there weren't real problems using force_sig instead of send_sig. force_sig does nothing to ensure the task it is sending signals to won't, and hasn't gone away. Which is why it is a bad idea to use force_sig on anything but current. As I recall drbd used force_sig on a kernel_thread which didn't go away.

When fixing the force_sig vs send_sig confusion I didn't realize that some places were using force_sig because they had not enabled receiving the signals they depended on. Which is where allow_kernel_signal comes from. But while using force_sig allow_kernel_signal is not necessary.

Eric

#188 lore raw

Re: [PATCH 4.9 183/271] signal: Allow cifs and drbd to receive their terminating signals

Quoted 70 lines · Eric W. Biederman
Quoted 51 lines · Sasha Levin
Quoted 50 lines · Greg Kroah-Hartman
Quoted 49 lines · Thomas Voegtle
Quoted 31 lines · Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that added allow_signal.

Quoted 8 lines
Cc Steve French <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc David Laight <[email protected]>
Fixes 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

These two commits come with that release, but...

Quoted 2 lines
Fixes fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes 3cf5d076fb4d ("signal: Remove task parameter from force_sig")

...these two commits not and were never added to 4.9.y.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Are these both really not needed?

I don't think so, do you feel otherwise?

Both of those commits read as a cleanup to me. I've actually slightly modified to patch to not need those commits (they were less than trivial to backport as is).

All of these changes were cleanup. Which is why I didn't tag any of them for stable.

Not to say that there weren't real problems using force_sig instead of send_sig. force_sig does nothing to ensure the task it is sending signals to won't, and hasn't gone away. Which is why it is a bad idea to use force_sig on anything but current. As I recall drbd used force_sig on a kernel_thread which didn't go away.

Quoted 6 lines

When fixing the force_sig vs send_sig confusion I didn't realize that some places were using force_sig because they had not enabled receiving the signals they depended on. Which is where allow_kernel_signal comes from. But while using force_sig allow_kernel_signal is not necessary.

Eric

Thanks for clarification.

Thomas

author maintainer
#189 lore raw

PATCH 184/271 ASoC: sun4i-i2s: RX and TX counter registers are swapped

In reply to Greg Kroah-Hartman

From: Maxime Ripard <[email protected]>

[ Upstream commit cf2c0e1ce9544df42170fb921f12da82dc0cc8d6 ]

The RX and TX counters registers offset have been swapped, fix that.

---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/sunxi/sun4i-i2s.c +2 -2
index 15c92400cea42..02c373c65e194 100644
@@ -78,8 +78,8 @@
 #define SUN4I_I2S_CLK_DIV_MCLK_MASK		GENMASK(3, 0)
 #define SUN4I_I2S_CLK_DIV_MCLK(mclk)			((mclk) << 0)
 
-#define SUN4I_I2S_RX_CNT_REG		0x28
-#define SUN4I_I2S_TX_CNT_REG		0x2c
+#define SUN4I_I2S_TX_CNT_REG		0x28
+#define SUN4I_I2S_RX_CNT_REG		0x2c
 
 #define SUN4I_I2S_TX_CHAN_SEL_REG	0x30
 #define SUN4I_I2S_TX_CHAN_SEL(num_chan)		(((num_chan) - 1) << 0)
Signature · 1 line
2.20.1
author maintainer
#190 lore raw

PATCH 185/271 dmaengine: dw: platform: Switch to acpi_dma_controller_register()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit e7b8514e4d68bec21fc6385fa0a66797ddc34ac9 ]

There is a possibility to have registered ACPI DMA controller while it has been gone already.

To avoid the potential crash, move to non-managed acpi_dma_controller_register().

---
 drivers/dma/dw/platform.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/dma/dw/platform.c +12 -2
index 5bda0eb9f393f..7536fe80bc33f 100644
@@ -87,13 +87,20 @@ static void dw_dma_acpi_controller_register(struct dw_dma *dw)
 	dma_cap_set(DMA_SLAVE, info->dma_cap);
 	info->filter_fn = dw_dma_acpi_filter;
 
-	ret = devm_acpi_dma_controller_register(dev, acpi_dma_simple_xlate,
-						info);
+	ret = acpi_dma_controller_register(dev, acpi_dma_simple_xlate, info);
 	if (ret)
 		dev_err(dev, "could not register acpi_dma_controller\n");
 }
+
+static void dw_dma_acpi_controller_free(struct dw_dma *dw)
+{
+	struct device *dev = dw->dma.dev;
+
+	acpi_dma_controller_free(dev);
+}
 #else /* !CONFIG_ACPI */
 static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {}
+static inline void dw_dma_acpi_controller_free(struct dw_dma *dw) {}
 #endif /* !CONFIG_ACPI */
 
 #ifdef CONFIG_OF
@@ -226,6 +233,9 @@ static int dw_remove(struct platform_device *pdev)
 {
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
+	if (ACPI_HANDLE(&pdev->dev))
+		dw_dma_acpi_controller_free(chip->dw);
+
 	if (pdev->dev.of_node)
 		of_dma_controller_free(pdev->dev.of_node);
 
Signature · 1 line
2.20.1
author maintainer
#191 lore raw

PATCH 186/271 mac80211: minstrel_ht: fix per-group max throughput rate initialization

In reply to Greg Kroah-Hartman

From: Felix Fietkau <[email protected]>

[ Upstream commit 56dd918ff06e3ee24d8067e93ed12b2a39e71394 ]

The group number needs to be multiplied by the number of rates per group to get the full rate index

Fixes 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability")
---
 net/mac80211/rc80211_minstrel_ht.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/rc80211_minstrel_ht.c +1 -1
index 593184d14b3ef..e1b0e26c1f174 100644
@@ -547,7 +547,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
 
 		/* (re)Initialize group rate indexes */
 		for(j = 0; j < MAX_THR_RATES; j++)
-			tmp_group_tp_rate[j] = group;
+			tmp_group_tp_rate[j] = MCS_GROUP_RATES * group;
 
 		for (i = 0; i < MCS_GROUP_RATES; i++) {
 			if (!(mg->supported & BIT(i)))
Signature · 1 line
2.20.1
author maintainer
#192 lore raw

PATCH 187/271 mips: avoid explicit UB in assignment of mips_io_port_base

In reply to Greg Kroah-Hartman

From: Nick Desaulniers <[email protected]>

[ Upstream commit 12051b318bc3ce5b42d6d786191008284b067d83 ]

The code in question is modifying a variable declared const through pointer manipulation. Such code is explicitly undefined behavior, and is the lone issue preventing malta_defconfig from booting when built with Clang:

If an attempt is made to modify an object defined with a const-qualified type through use of an lvalue with non-const-qualified type, the behavior is undefined.

LLVM is removing such assignments. A simple fix is to not declare variables const that you plan on modifying. Limiting the scope would be a better method of preventing unwanted writes to such a variable.

Further, the code in question mentions "compiler bugs" without any links to bug reports, so it is difficult to know if the issue is resolved in GCC. The patch was authored in 2006, which would have been GCC 4.0.3 or 4.1.1. The minimal supported version of GCC in the Linux kernel is currently 4.6.

For what its worth, there was UB before the commit in question, it just added a barrier and got lucky IRT codegen. I don't think there's any actual compiler bugs related, just runtime bugs due to UB.

---
 arch/mips/include/asm/io.h | 14 ++------------
 arch/mips/kernel/setup.c   |  2 +-
 2 files changed, 3 insertions(+), 13 deletions(-)
arch/mips/include/asm/io.h +2 -12
index 06049b6b3dddb..5dfae80264b9b 100644
@@ -60,21 +60,11 @@
  * instruction, so the lower 16 bits must be zero.  Should be true on
  * on any sane architecture; generic code does not use this assumption.
  */
-extern const unsigned long mips_io_port_base;
+extern unsigned long mips_io_port_base;
 
-/*
- * Gcc will generate code to load the value of mips_io_port_base after each
- * function call which may be fairly wasteful in some cases.  So we don't
- * play quite by the book.  We tell gcc mips_io_port_base is a long variable
- * which solves the code generation issue.  Now we need to violate the
- * aliasing rules a little to make initialization possible and finally we
- * will need the barrier() to fight side effects of the aliasing chat.
- * This trickery will eventually collapse under gcc's optimizer.  Oh well.
- */
 static inline void set_io_port_base(unsigned long base)
 {
-	* (unsigned long *) &mips_io_port_base = base;
-	barrier();
+	mips_io_port_base = base;
 }
 
 /*
arch/mips/kernel/setup.c +1 -1
index 695950361d2a7..7cc1d29334ee1 100644
@@ -74,7 +74,7 @@ static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
  */
-const unsigned long mips_io_port_base = -1;
+unsigned long mips_io_port_base = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
 static struct resource code_resource = { .name = "Kernel code", };
Signature · 1 line
2.20.1
author maintainer
#193 lore raw

PATCH 188/271 ahci: Do not export local variable ahci_em_messages

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 60fc35f327e0a9e60b955c0f3c3ed623608d1baa ]

The commit ed08d40cdec4
("ahci: Changing two module params with static and __read_mostly")
moved ahci_em_messages to be static while missing the fact of exporting it.

WARNING: "ahci_em_messages" [vmlinux] is a static EXPORT_SYMBOL_GPL

Drop export for the local variable ahci_em_messages.

Fixes ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly")
Cc Chuansheng Liu <[email protected]>
---
 drivers/ata/libahci.c | 1 -
 1 file changed, 1 deletion(-)
drivers/ata/libahci.c +0 -1
index f233ce60a6781..1610fff19bb39 100644
@@ -190,7 +190,6 @@ struct ata_port_operations ahci_pmp_retry_srst_ops = {
 EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
 
 static bool ahci_em_messages __read_mostly = true;
-EXPORT_SYMBOL_GPL(ahci_em_messages);
 module_param(ahci_em_messages, bool, 0444);
 /* add other LED protocol types when they become supported */
 MODULE_PARM_DESC(ahci_em_messages,
Signature · 1 line
2.20.1
author maintainer
#194 lore raw

PATCH 189/271 Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit ab9bb6318b0967671e0c9b6537c1537d51ca4f45 ]

Commit dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()") made the kfifo code round the number of elements up. That was good for __kfifo_alloc(), but it's actually wrong for __kfifo_init().

The difference? __kfifo_alloc() will allocate the rounded-up number of elements, but __kfifo_init() uses an allocation done by the caller. We can't just say "use more elements than the caller allocated", and have to round down.

The good news? All the normal cases will be using power-of-two arrays anyway, and most users of kfifo's don't use kfifo_init() at all, but one of the helper macros to declare a KFIFO that enforce the proper power-of-two behavior. But it looks like at least ibmvscsis might be affected.

The bad news? Will Deacon refers to an old thread and points points out that the memory ordering in kfifo's is questionable. See

https://lore.kernel.org/lkml/[email protected]/

for more.

Fixes dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()")
Cc Stefani Seibold <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Dan Carpenter <[email protected]>
Cc Greg KH <[email protected]>
Cc Kees Cook <[email protected]>
Cc Will Deacon <[email protected]>
---
 lib/kfifo.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
lib/kfifo.c +2 -1
index 90ba1eb1df06e..a94227c555510 100644
@@ -82,7 +82,8 @@ int __kfifo_init(struct __kfifo *fifo, void *buffer,
 {
 	size /= esize;
 
-	size = roundup_pow_of_two(size);
+	if (!is_power_of_2(size))
+		size = rounddown_pow_of_two(size);
 
 	fifo->in = 0;
 	fifo->out = 0;
Signature · 1 line
2.20.1
author maintainer
#195 lore raw

PATCH 190/271 hwmon: (lm75) Fix write operations for negative temperatures

In reply to Greg Kroah-Hartman

From: Guenter Roeck <[email protected]>

[ Upstream commit 7d82fcc9d9e81241778aaa22fda7be753e237d86 ]

Writes into limit registers fail if the temperature written is negative. The regmap write operation checks the value range, regmap_write accepts an unsigned int as parameter, and the temperature value passed to regmap_write is kept in a variable declared as long. Negative values are converted large unsigned integers, which fails the range check. Fix by type casting the temperature to u16 when calling regmap_write().

Cc Iker Perez del Palomar Sustatxa <[email protected]>
Fixes e65365fed87f ("hwmon: (lm75) Convert to use regmap")
---
 drivers/hwmon/lm75.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/lm75.c +1 -1
index eff3b24d84737..fc31669a86ba8 100644
@@ -164,7 +164,7 @@ static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
 	temp = DIV_ROUND_CLOSEST(temp  << (resolution - 8),
 				 1000) << (16 - resolution);
 
-	return regmap_write(data->regmap, reg, temp);
+	return regmap_write(data->regmap, reg, (u16)temp);
 }
 
 static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
Signature · 1 line
2.20.1
author maintainer
#196 lore raw

PATCH 191/271 power: supply: Init device wakeup after device_add()

In reply to Greg Kroah-Hartman

From: Stephen Boyd <[email protected]>

[ Upstream commit 8288022284859acbcc3cf1a073a1e2692d6c2543 ]

We may want to use the device pointer in device_init_wakeup() with functions that expect the device to already be added with device_add(). For example, if we were to link the device initializing wakeup to something in sysfs such as a class for wakeups we'll run into an error. It looks like this code was written with the assumption that the device would be added before initializing wakeup due to the order of operations in power_supply_unregister().

Let's change the order of operations so we don't run into problems here.

Fixes 948dcf966228 ("power_supply: Prevent suspend until power supply events are processed")
Cc Greg Kroah-Hartman <[email protected]>
Cc Tri Vo <[email protected]>
Cc Kalesh Singh <[email protected]>
Cc Ravi Chandra Sadineni <[email protected]>
Cc Viresh Kumar <[email protected]>
---
 drivers/power/supply/power_supply_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/power/supply/power_supply_core.c +5 -5
index 9e05ae0430a99..cb0b3d3d132fc 100644
@@ -764,14 +764,14 @@ __power_supply_register(struct device *parent,
 	}
 
 	spin_lock_init(&psy->changed_lock);
-	rc = device_init_wakeup(dev, ws);
-	if (rc)
-		goto wakeup_init_failed;
-
 	rc = device_add(dev);
 	if (rc)
 		goto device_add_failed;
 
+	rc = device_init_wakeup(dev, ws);
+	if (rc)
+		goto wakeup_init_failed;
+
 	rc = psy_register_thermal(psy);
 	if (rc)
 		goto register_thermal_failed;
@@ -808,8 +808,8 @@ register_cooler_failed:
 	psy_unregister_thermal(psy);
 register_thermal_failed:
 	device_del(dev);
-device_add_failed:
 wakeup_init_failed:
+device_add_failed:
 check_supplies_failed:
 dev_set_name_failed:
 	put_device(dev);
Signature · 1 line
2.20.1