monitor: Refactoring in preparation for qemu-storage-daemon
v2 cover monitor: Refactoring in preparation for qemu-storage-daemon
This series creates a QAPI module 'control' that can be used from tools outside the system emulator and moves some monitor initialisation code from vl.c to monitor code.
It is split from the series to introduce qemu-storage-daemon because these refactorings make sense on their own as cleanups.
v2:
- Removed allow_hmp parameter from monitor_init_opts() [Markus]
- Renamed monitor.json to control.json [Markus]
Kevin Wolf (4):
monitor: Move monitor option parsing to monitor/monitor.c
qapi: Create module 'control'
monitor: Create monitor/qmp-cmds-control.c
monitor: Move qmp_query_qmp_schema to qmp-cmds-control.c
qapi/control.json | 218 +++++++++++++++++++++++++++++++++++++ qapi/misc.json | 212 ------------------------------------ qapi/qapi-schema.json | 1 + include/monitor/monitor.h | 4 + include/sysemu/sysemu.h | 1 - monitor/monitor-internal.h | 4 + monitor/hmp-cmds.c | 1 + monitor/misc.c | 127 +-------------------- monitor/monitor.c | 48 ++++++++ monitor/qmp-cmds-control.c | 169 ++++++++++++++++++++++++++++ monitor/qmp-cmds.c | 15 +-- monitor/qmp.c | 2 +- tests/qtest/qmp-test.c | 2 +- ui/gtk.c | 1 + vl.c | 45 +------- monitor/Makefile.objs | 3 +- qapi/Makefile.objs | 6 +- 17 files changed, 456 insertions(+), 403 deletions(-) create mode 100644 qapi/control.json create mode 100644 monitor/qmp-cmds-control.c
Signature · 1 line
2.20.1
PATCH v2 1/4 monitor: Move monitor option parsing to monitor/monitor.c
Both the system emulators and tools with QMP support (specifically, the planned storage daemon) will need to parse monitor options, so move that code to monitor/monitor.c, which can be linked into binaries that aren't a system emulator.
--- include/monitor/monitor.h | 4 ++++ include/sysemu/sysemu.h | 1 - monitor/monitor.c | 48 +++++++++++++++++++++++++++++++++++++++ vl.c | 45 +----------------------------------- 4 files changed, 53 insertions(+), 45 deletions(-)
include/monitor/monitor.h +4 -0
@@ -3,6 +3,7 @@#include "block/block.h" #include "qapi/qapi-types-misc.h" +#include "qemu/option.h" #include "qemu/readline.h" extern __threadMonitor *cur_mon;
@@ -10,12 +11,15 @@ typedef struct MonitorHMP MonitorHMP;#define QMP_REQ_QUEUE_LEN_MAX 8 +extern QemuOptsList qemu_mon_opts; +bool monitor_cur_is_qmp (void );void monitor_init_globals (void );void monitor_init_globals_core (void );void monitor_init_qmp (Chardev *chr,bool pretty);void monitor_init_hmp (Chardev *chr,bool use_readline); +int monitor_init_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void );int monitor_suspend (Monitor *mon);
include/sysemu/sysemu.h +0 -1
@@ -128,7 +128,6 @@ extern QemuOptsList qemu_netdev_opts;extern QemuOptsList qemu_nic_opts;extern QemuOptsList qemu_net_opts;extern QemuOptsList qemu_global_opts; -extern QemuOptsList qemu_mon_opts;extern QemuOptsList qemu_semihosting_config_opts;#endif
monitor/monitor.c +48 -0
54 lines not on this page · raw message
vl.c +1 -44
51 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [PATCH v2 1/4] monitor: Move monitor option parsing to monitor/monitor.c
Quoted 19 lines · Kevin Wolf
Both the system emulators and tools with QMP support (specifically, the planned storage daemon) will need to parse monitor options, so move that code to
monitor/monitor.c, which can be linked into binaries that aren't a system emulator.Signed-off-by Kevin Wolf <[email protected]>Reviewed-by Markus Armbruster <[email protected]>--- include/monitor/monitor.h | 4 ++++ include/sysemu/sysemu.h | 1 - monitor/monitor.c | 48 +++++++++++++++++++++++++++++++++++++++ vl.c | 45 +----------------------------------- 4 files changed, 53 insertions(+), 45 deletions(-)include/monitor/monitor.h +0
-0
include/monitor/monitor.h line 6
Quoted 4 lines
include/monitor/monitor.h +1
-0@@ -3,6 +3,7 @@#include "block/block.h" #include "qapi/qapi-types-misc.h" +#include "qemu/option.h"
Superfluous; qemu/typedefs.h already provides what you need.
Quoted 9 lines
include/monitor/monitor.h +2
-0#include "qemu/readline.h" extern __threadMonitor *cur_mon;@@ -10,12 +11,15 @@ typedef struct MonitorHMP MonitorHMP;#define QMP_REQ_QUEUE_LEN_MAX 8 +extern QemuOptsList qemu_mon_opts; +
include/monitor/monitor.h typedef struct MonitorHMP MonitorHMP; · line 25
Quoted 10 lines
include/monitor/monitor.h +1
-0bool monitor_cur_is_qmp (void );void monitor_init_globals (void );void monitor_init_globals_core (void );void monitor_init_qmp (Chardev *chr,bool pretty);void monitor_init_hmp (Chardev *chr,bool use_readline); +int monitor_init_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void );int monitor_suspend (Monitor *mon);
[...]
With the superfluous #include dropped:
PATCH v2 2/4 qapi: Create module 'control'
In reply to Kevin Wolfmisc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well.
--- qapi/control.json | 218 +++++++++++++++++++++++++++++++++++++ qapi/misc.json | 212 ------------------------------------ qapi/qapi-schema.json | 1 + monitor/monitor-internal.h | 1 + monitor/hmp-cmds.c | 1 + monitor/misc.c | 1 + monitor/qmp-cmds.c | 1 + monitor/qmp.c | 2 +- tests/qtest/qmp-test.c | 2 +- ui/gtk.c | 1 + qapi/Makefile.objs | 6 +- 11 files changed, 229 insertions(+), 217 deletions(-) create mode 100644 qapi/control.json
qapi/control.json new file +218 -0
@@ -0,0 +1,218 @@ +# -*- Mode: Python -*- +# + +## +# = Monitor definitions (shared between system emulator and tools) +## + +## +# @qmp_capabilities: +# +# Enable QMP capabilities. +# +# Arguments: +# +# @enable: An optional list of QMPCapability values to enable. The +# client must not enable any capability that is not +# mentioned in the QMP greeting message. If the field is not +# provided, it means no QMP capabilities will be enabled. +# (since 2.12) +# +# Example: +# +# -> { "execute": "qmp_capabilities", +# "arguments": { "enable": [ "oob" ] } } +# <- { "return": {} } +# +# Notes: This command is valid exactly when first connecting: it must be +# issued before any other command will be accepted, and will fail once the +# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) +# +# The QMP client needs to explicitly enable QMP capabilities, otherwise +# all the QMP capabilities will be turned off by default. +# +# Since: 0.13 +# +## +{ 'command': 'qmp_capabilities', + 'data': { '*enable': [ 'QMPCapability' ] }, + 'allow-preconfig': true } + +## +# @QMPCapability: +# +# Enumeration of capabilities to be advertised during initial client +# connection, used for agreeing on particular QMP extension behaviors. +# +# @oob: QMP ability to support out-of-band requests. +# (Please refer to qmp-spec.txt for more information on OOB) +# +# Since: 2.12 +# +## +{ 'enum': 'QMPCapability', + 'data': [ 'oob' ] } + +## +# @VersionTriple: +# +# A three-part version number. +# +# @major: The major version number. +# +# @minor: The minor version number. +# +# @micro: The micro version number. +# +# Since: 2.4 +## +{ 'struct': 'VersionTriple', + 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} } + + +## +# @VersionInfo: +# +# A description of QEMU's version. +# +# @qemu: The version of QEMU. By current convention, a micro +# version of 50 signifies a development branch. A micro version +# greater than or equal to 90 signifies a release candidate for +# the next minor version. A micro version of less than 50 +# signifies a stable release. +# +# @package: QEMU will always set this field to an empty string. Downstream +# versions of QEMU should set this to a non-empty string. The +# exact format depends on the downstream however it highly +# recommended that a unique name is used. +# +# Since: 0.14.0 +## +{ 'struct': 'VersionInfo', + 'data': {'qemu': 'VersionTriple', 'package': 'str'} } + +## +# @query-version: +# +# Returns the current version of QEMU. +# +# Returns: A @VersionInfo object describing the current version of QEMU. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-version" } +# <- { +# "return":{ +# "qemu":{ +# "major":0, +# "minor":11, +# "micro":5 +# }, +# "package":"" +# } +# } +# +## +{ 'command': 'query-version', 'returns': 'VersionInfo', + 'allow-preconfig': true } + +## +# @CommandInfo: +# +# Information about a QMP command +# +# @name: The command name +# +# Since: 0.14.0 +## +{ 'struct': 'CommandInfo', 'data': {'name': 'str'} } + +## +# @query-commands: +# +# Return a list of supported QMP commands by this server +# +# Returns: A list of @CommandInfo for all supported commands +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-commands" } +# <- { +# "return":[ +# { +# "name":"query-balloon" +# }, +# { +# "name":"system_powerdown" +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-commands', 'returns': ['CommandInfo'], + 'allow-preconfig': true } + +## +# @EventInfo: +# +# Information about a QMP event +# +# @name: The event name +# +# Since: 1.2.0 +## +{ 'struct': 'EventInfo', 'data': {'name': 'str'} } + +## +# @query-events: +# +# Return information on QMP events. +# +# Returns: A list of @EventInfo. +# +# Since: 1.2.0 +# +# Note: This command is deprecated, because its output doesn't reflect +# compile-time configuration. Use query-qmp-schema instead. +# +# Example: +# +# -> { "execute": "query-events" } +# <- { +# "return": [ +# { +# "name":"SHUTDOWN" +# }, +# { +# "name":"RESET" +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-events', 'returns': ['EventInfo'] } + +## +# @quit: +# +# This command will cause the QEMU process to exit gracefully. While every +# attempt is made to send the QMP response before terminating, this is not +# guaranteed. When using this interface, a premature EOF would not be +# unexpected. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "quit" } +# <- { "return": {} } +## +{ 'command': 'quit' }
qapi/misc.json +0 -212
230 lines not on this page · raw message
qapi/qapi-schema.json +1 -0
@@ -103,6 +103,7 @@ { 'include': 'qdev.json' } { 'include': 'machine.json' } { 'include': 'machine-target.json' } +{ 'include': 'control.json' } { 'include': 'misc.json' } { 'include': 'misc-target.json' } { 'include': 'audio.json' }
monitor/monitor-internal.h +1 -0
@@ -27,6 +27,7 @@#include "chardev/char-fe.h" #include "monitor/monitor.h" +#include "qapi/qapi-types-control.h" #include "qapi/qmp/dispatch.h" #include "qapi/qmp/json-parser.h" #include "qemu/readline.h"
monitor/hmp-cmds.c +1 -0
@@ -33,6 +33,7 @@#include "qapi/qapi-commands-char.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-net.h" #include "qapi/qapi-commands-rocker.h" #include "qapi/qapi-commands-run-state.h"
monitor/misc.c +1 -0
@@ -67,6 +67,7 @@#include "qemu/thread.h" #include "block/qapi.h" #include "qapi/qapi-commands-char.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" #include "qapi/qapi-commands-qom.h"
monitor/qmp-cmds.c +1 -0
@@ -34,6 +34,7 @@#include "qapi/qapi-commands-block-core.h" #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-ui.h" #include "qapi/qmp/qerror.h" #include "hw/mem/memory-device.h"
monitor/qmp.c +1 -1
@@ -27,7 +27,7 @@#include "chardev/char-io.h" #include "monitor-internal.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qjson.h" #include "qapi/qmp/qlist.h"
tests/qtest/qmp-test.c +1 -1
@@ -13,7 +13,7 @@#include "qemu/osdep.h" #include "libqtest.h" #include "qapi/error.h" -#include "qapi/qapi-visit-misc.h" +#include "qapi/qapi-visit-control.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qlist.h" #include "qapi/qobject-input-visitor.h"
ui/gtk.c +1 -0
@@ -33,6 +33,7 @@#include "qemu/osdep.h" #include "qapi/error.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qemu/cutils.h" #include "ui/console.h"
qapi/Makefile.objs +3 -3
@@ -5,9 +5,9 @@ util-obj-y += opts-visitor.o qapi-clone-visitor.o util-obj-y += qmp-event.o util-obj-y += qapi-util.o -QAPI_COMMON_MODULES = audio authz block-core block char common crypto -QAPI_COMMON_MODULES += dump error introspect job machine migration misc net -QAPI_COMMON_MODULES += qdev qom rdma rocker run-state sockets tpm +QAPI_COMMON_MODULES = audio authz block-core block char common control crypto +QAPI_COMMON_MODULES += dump error introspect job machine migration misc +QAPI_COMMON_MODULES += net qdev qom rdma rocker run-state sockets tpm QAPI_COMMON_MODULES += trace transaction ui QAPI_TARGET_MODULES = machine-target misc-target QAPI_MODULES = $(QAPI_COMMON_MODULES) $(QAPI_TARGET_MODULES)
Signature · 1 line
2.20.1
Re: [PATCH v2 2/4] qapi: Create module 'control'
Quoted 28 lines · Kevin Wolf
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well.
Signed-off-by Kevin Wolf <[email protected]>--- qapi/control.json | 218 +++++++++++++++++++++++++++++++++++++ qapi/misc.json | 212 ------------------------------------ qapi/qapi-schema.json | 1 + monitor/monitor-internal.h | 1 + monitor/hmp-cmds.c | 1 + monitor/misc.c | 1 + monitor/qmp-cmds.c | 1 + monitor/qmp.c | 2 +- tests/qtest/qmp-test.c | 2 +- ui/gtk.c | 1 + qapi/Makefile.objs | 6 +- 11 files changed, 229 insertions(+), 217 deletions(-) create mode 100644 qapi/control.jsonqapi/control.json new file +0
-0
qapi/control.json line 3
Quoted 3 lines
qapi/control.json new file +3
-0@@ -0,0 +1,218 @@ +# -*- Mode: Python -*- +# +
Let's add a copyright notice:
# Copyright (C) 2011-2020 Red Hat, Inc.
#
# This work is licensed under the terms of the GNU GPL, version 2 or later. # See the COPYING file in the top-level directory.
qapi/control.json line 6
Quoted 3 lines
qapi/control.json new file +3
-0+## +# = Monitor definitions (shared between system emulator and tools) +##
This comment does double-duty: it's for readers of this source file, and for readers of generated docs/interop/qemu-qmp-ref.*. It's okay for the former, but not the latter, as the resulting table of contents shows:
1 API Reference
1.1 Introduction
1.2 Stability Considerations
1.3 QMP errors
1.4 Common data types
1.5 Socket data types
1.6 VM run state
1.7 Cryptography
1.8 Block devices
1.8.1 Block core (VM unrelated)
1.8.2 Background jobs
1.8.3 Additional block stuff (VM related)
1.9 Character devices
1.10 Dump guest memory
1.11 Net devices
1.12 RDMA device
1.13 Rocker switch device
1.14 TPM (trusted platform module) devices
1.15 Remote desktop
1.15.1 Spice
1.15.2 VNC
1.16 Input
1.17 Migration
1.18 Transactions
1.19 Tracing
1.20 QMP introspection
1.21 QEMU Object Model (QOM)
1.22 Device infrastructure (qdev)
1.23 Machines
1.24 Monitor definitions (shared between system emulator and tools) 1.25 Miscellanea
Commands and Events Index
Data Types Index
Let's examine the file's contents to find a better description:
* qmp_capabilities
* QMPCapability
QMP capabilities negotiation. This is about the QMP monitor. I figure few users of QMP need to know about it. No need to complicate this patch to put it in the ideal spot (assuming there are ideal spots).
* query-version
* VersionInfo
* VersionTriple
QMP query-version, QMP greeting, HMP info version
Losely related to introspection, QMP capabilities negotiation (the greeting includes query-version output), and "process" below.
The HMP use is an implementation detail.
* query-commands
* CommandInfo
* query-events
* EventInfo
Legacy QMP introspection. query-events is deprecated in favor of query-qmp-schema. query-commands probably should be.
Ideally, these go into or next to section 1.20 QMP introspection. Let's deprecate and put them wherever is easiest for the grace period.
* quit
You move this here because like everything else you move here, you expect this to be present in any QMP monitor. I expect that, too.
It's not really about the QMP monitor, it's about controlling the process that provides the QMP monitor.
Proposed header:
# = QMP monitor control
This files @quit under monitor control, which isn't quite right, but it'll do. Moving it away from @stop & friends is a bit unfortunate (see patch to misc.json below). If that bothers us, we need to split control.json. I'm not demanding such a split.
Quoted 454 lines
qapi/control.json new file +212
-0+ +## +# @qmp_capabilities: +# +# Enable QMP capabilities. +# +# Arguments: +# +# @enable: An optional list of QMPCapability values to enable. The +# client must not enable any capability that is not +# mentioned in the QMP greeting message. If the field is not +# provided, it means no QMP capabilities will be enabled. +# (since 2.12) +# +# Example: +# +# -> { "execute": "qmp_capabilities", +# "arguments": { "enable": [ "oob" ] } } +# <- { "return": {} } +# +# Notes: This command is valid exactly when first connecting: it must be +# issued before any other command will be accepted, and will fail once the +# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) +# +# The QMP client needs to explicitly enable QMP capabilities, otherwise +# all the QMP capabilities will be turned off by default. +# +# Since: 0.13 +# +## +{ 'command': 'qmp_capabilities', + 'data': { '*enable': [ 'QMPCapability' ] }, + 'allow-preconfig': true } + +## +# @QMPCapability: +# +# Enumeration of capabilities to be advertised during initial client +# connection, used for agreeing on particular QMP extension behaviors. +# +# @oob: QMP ability to support out-of-band requests. +# (Please refer to qmp-spec.txt for more information on OOB) +# +# Since: 2.12 +# +## +{ 'enum': 'QMPCapability', + 'data': [ 'oob' ] } + +## +# @VersionTriple: +# +# A three-part version number. +# +# @major: The major version number. +# +# @minor: The minor version number. +# +# @micro: The micro version number. +# +# Since: 2.4 +## +{ 'struct': 'VersionTriple', + 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} } + + +## +# @VersionInfo: +# +# A description of QEMU's version. +# +# @qemu: The version of QEMU. By current convention, a micro +# version of 50 signifies a development branch. A micro version +# greater than or equal to 90 signifies a release candidate for +# the next minor version. A micro version of less than 50 +# signifies a stable release. +# +# @package: QEMU will always set this field to an empty string. Downstream +# versions of QEMU should set this to a non-empty string. The +# exact format depends on the downstream however it highly +# recommended that a unique name is used. +# +# Since: 0.14.0 +## +{ 'struct': 'VersionInfo', + 'data': {'qemu': 'VersionTriple', 'package': 'str'} } + +## +# @query-version: +# +# Returns the current version of QEMU. +# +# Returns: A @VersionInfo object describing the current version of QEMU. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-version" } +# <- { +# "return":{ +# "qemu":{ +# "major":0, +# "minor":11, +# "micro":5 +# }, +# "package":"" +# } +# } +# +## +{ 'command': 'query-version', 'returns': 'VersionInfo', + 'allow-preconfig': true } + +## +# @CommandInfo: +# +# Information about a QMP command +# +# @name: The command name +# +# Since: 0.14.0 +## +{ 'struct': 'CommandInfo', 'data': {'name': 'str'} } + +## +# @query-commands: +# +# Return a list of supported QMP commands by this server +# +# Returns: A list of @CommandInfo for all supported commands +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-commands" } +# <- { +# "return":[ +# { +# "name":"query-balloon" +# }, +# { +# "name":"system_powerdown" +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-commands', 'returns': ['CommandInfo'], + 'allow-preconfig': true } + +## +# @EventInfo: +# +# Information about a QMP event +# +# @name: The event name +# +# Since: 1.2.0 +## +{ 'struct': 'EventInfo', 'data': {'name': 'str'} } + +## +# @query-events: +# +# Return information on QMP events. +# +# Returns: A list of @EventInfo. +# +# Since: 1.2.0 +# +# Note: This command is deprecated, because its output doesn't reflect +# compile-time configuration. Use query-qmp-schema instead. +# +# Example: +# +# -> { "execute": "query-events" } +# <- { +# "return": [ +# { +# "name":"SHUTDOWN" +# }, +# { +# "name":"RESET" +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-events', 'returns': ['EventInfo'] } + +## +# @quit: +# +# This command will cause the QEMU process to exit gracefully. While every +# attempt is made to send the QMP response before terminating, this is not +# guaranteed. When using this interface, a premature EOF would not be +# unexpected. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "quit" } +# <- { "return": {} } +## +{ 'command': 'quit' }qapi/misc.json +0
-212@@ -7,159 +7,6 @@ { 'include': 'common.json' } -## -# @qmp_capabilities: -# -# Enable QMP capabilities. -# -# Arguments: -# -# @enable: An optional list of QMPCapability values to enable. The -# client must not enable any capability that is not -# mentioned in the QMP greeting message. If the field is not -# provided, it means no QMP capabilities will be enabled. -# (since 2.12) -# -# Example: -# -# -> { "execute": "qmp_capabilities", -# "arguments": { "enable": [ "oob" ] } } -# <- { "return": {} } -# -# Notes: This command is valid exactly when first connecting: it must be -# issued before any other command will be accepted, and will fail once the -# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) -# -# The QMP client needs to explicitly enable QMP capabilities, otherwise -# all the QMP capabilities will be turned off by default. -# -# Since: 0.13 -# -## -{ 'command': 'qmp_capabilities', - 'data': { '*enable': [ 'QMPCapability' ] }, - 'allow-preconfig': true } - -## -# @QMPCapability: -# -# Enumeration of capabilities to be advertised during initial client -# connection, used for agreeing on particular QMP extension behaviors. -# -# @oob: QMP ability to support out-of-band requests. -# (Please refer to qmp-spec.txt for more information on OOB) -# -# Since: 2.12 -# -## -{ 'enum': 'QMPCapability', - 'data': [ 'oob' ] } - -## -# @VersionTriple: -# -# A three-part version number. -# -# @major: The major version number. -# -# @minor: The minor version number. -# -# @micro: The micro version number. -# -# Since: 2.4 -## -{ 'struct': 'VersionTriple', - 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} } - - -## -# @VersionInfo: -# -# A description of QEMU's version. -# -# @qemu: The version of QEMU. By current convention, a micro -# version of 50 signifies a development branch. A micro version -# greater than or equal to 90 signifies a release candidate for -# the next minor version. A micro version of less than 50 -# signifies a stable release. -# -# @package: QEMU will always set this field to an empty string. Downstream -# versions of QEMU should set this to a non-empty string. The -# exact format depends on the downstream however it highly -# recommended that a unique name is used. -# -# Since: 0.14.0 -## -{ 'struct': 'VersionInfo', - 'data': {'qemu': 'VersionTriple', 'package': 'str'} } - -## -# @query-version: -# -# Returns the current version of QEMU. -# -# Returns: A @VersionInfo object describing the current version of QEMU. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-version" } -# <- { -# "return":{ -# "qemu":{ -# "major":0, -# "minor":11, -# "micro":5 -# }, -# "package":"" -# } -# } -# -## -{ 'command': 'query-version', 'returns': 'VersionInfo', - 'allow-preconfig': true } - -## -# @CommandInfo: -# -# Information about a QMP command -# -# @name: The command name -# -# Since: 0.14.0 -## -{ 'struct': 'CommandInfo', 'data': {'name': 'str'} } - -## -# @query-commands: -# -# Return a list of supported QMP commands by this server -# -# Returns: A list of @CommandInfo for all supported commands -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-commands" } -# <- { -# "return":[ -# { -# "name":"query-balloon" -# }, -# { -# "name":"system_powerdown" -# } -# ] -# } -# -# Note: This example has been shortened as the real response is too long. -# -## -{ 'command': 'query-commands', 'returns': ['CommandInfo'], - 'allow-preconfig': true } - ## # @LostTickPolicy: #@@ -300,48 +147,6 @@ ## { 'command': 'query-uuid', 'returns': 'UuidInfo', 'allow-preconfig': true } -## -# @EventInfo: -# -# Information about a QMP event -# -# @name: The event name -# -# Since: 1.2.0 -## -{ 'struct': 'EventInfo', 'data': {'name': 'str'} } - -## -# @query-events: -# -# Return information on QMP events. -# -# Returns: A list of @EventInfo. -# -# Since: 1.2.0 -# -# Note: This command is deprecated, because its output doesn't reflect -# compile-time configuration. Use query-qmp-schema instead. -# -# Example: -# -# -> { "execute": "query-events" } -# <- { -# "return": [ -# { -# "name":"SHUTDOWN" -# }, -# { -# "name":"RESET" -# } -# ] -# } -# -# Note: This example has been shortened as the real response is too long. -# -## -{ 'command': 'query-events', 'returns': ['EventInfo'] } - ## # @IOThreadInfo: #@@ -764,23 +569,6 @@ ## { 'command': 'query-pci', 'returns': ['PciInfo'] } -## -# @quit: -# -# This command will cause the QEMU process to exit gracefully. While every -# attempt is made to send the QMP response before terminating, this is not -# guaranteed. When using this interface, a premature EOF would not be -# unexpected. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "quit" } -# <- { "return": {} } -## -{ 'command': 'quit' } - ## # @stop: #qapi/qapi-schema.json +0
-0
qapi/qapi-schema.json line 109
Quoted 7 lines
qapi/qapi-schema.json +1
-0@@ -103,6 +103,7 @@ { 'include': 'qdev.json' } { 'include': 'machine.json' } { 'include': 'machine-target.json' } +{ 'include': 'control.json' } { 'include': 'misc.json' } { 'include': 'misc-target.json' } { 'include': 'audio.json' }
This determines position within docs/interop/qemu-qmp-ref.*. Next to misc.json is the least change. Perhaps putting it next to introspect.json would be better.
If we split @quit off control.json, then we could include the .json providing @quit next to @stop & friends. Again, I'm not demanding such a split.
Quoted 17 lines
monitor/monitor-internal.h +1
-0@@ -27,6 +27,7 @@#include "chardev/char-fe.h" #include "monitor/monitor.h" +#include "qapi/qapi-types-control.h" #include "qapi/qmp/dispatch.h" #include "qapi/qmp/json-parser.h" #include "qemu/readline.h" monitor/hmp-cmds.c +0
-0
monitor/hmp-cmds.c line 39
Quoted 7 lines
monitor/hmp-cmds.c +1
-0@@ -33,6 +33,7 @@#include "qapi/qapi-commands-char.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-net.h" #include "qapi/qapi-commands-rocker.h" #include "qapi/qapi-commands-run-state.h"
Please keep the qapi/qapi-commands-* sorted, like you do ...
monitor/misc.c line 73
Quoted 12 lines
monitor/misc.c +1
-0@@ -67,6 +67,7 @@#include "qemu/thread.h" #include "block/qapi.h" #include "qapi/qapi-commands-char.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" #include "qapi/qapi-commands-qom.h"
... here.
monitor/qmp-cmds.c line 40
Quoted 12 lines
monitor/qmp-cmds.c +1
-0@@ -34,6 +34,7 @@#include "qapi/qapi-commands-block-core.h" #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-ui.h" #include "qapi/qmp/qerror.h" #include "hw/mem/memory-device.h"
Likewise.
Quoted 45 lines
monitor/qmp.c +1
-1@@ -27,7 +27,7 @@#include "chardev/char-io.h" #include "monitor-internal.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qjson.h" #include "qapi/qmp/qlist.h" tests/qtest/qmp-test.c +1
-1@@ -13,7 +13,7 @@#include "qemu/osdep.h" #include "libqtest.h" #include "qapi/error.h" -#include "qapi/qapi-visit-misc.h" +#include "qapi/qapi-visit-control.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qlist.h" #include "qapi/qobject-input-visitor.h" ui/gtk.c +1
-0@@ -33,6 +33,7 @@#include "qemu/osdep.h" #include "qapi/error.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qemu/cutils.h" #include "ui/console.h" qapi/Makefile.objs +0
-0@@ -5,9 +5,9 @@ util-obj-y += opts-visitor.o qapi-clone-visitor.o util-obj-y += qmp-event.o util-obj-y += qapi-util.o
qapi/Makefile.objs util-obj-y += opts-visitor.o qapi-clone-visitor.o · line 13
Quoted 10 lines
qapi/Makefile.objs +3
-3-QAPI_COMMON_MODULES = audio authz block-core block char common crypto -QAPI_COMMON_MODULES += dump error introspect job machine migration misc net -QAPI_COMMON_MODULES += qdev qom rdma rocker run-state sockets tpm +QAPI_COMMON_MODULES = audio authz block-core block char common control crypto +QAPI_COMMON_MODULES += dump error introspect job machine migration misc +QAPI_COMMON_MODULES += net qdev qom rdma rocker run-state sockets tpm QAPI_COMMON_MODULES += trace transaction ui QAPI_TARGET_MODULES = machine-target misc-target QAPI_MODULES = $(QAPI_COMMON_MODULES) $(QAPI_TARGET_MODULES)
With the comments and the include directives tidied up:
Re: [PATCH v2 2/4] qapi: Create module 'control'
Am 29.01.2020 um 09:35 hat Markus Armbruster geschrieben:
Quoted 36 lines
Quoted 28 lines · Kevin Wolf
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well.
Signed-off-by Kevin Wolf <[email protected]>--- qapi/control.json | 218 +++++++++++++++++++++++++++++++++++++ qapi/misc.json | 212 ------------------------------------ qapi/qapi-schema.json | 1 + monitor/monitor-internal.h | 1 + monitor/hmp-cmds.c | 1 + monitor/misc.c | 1 + monitor/qmp-cmds.c | 1 + monitor/qmp.c | 2 +- tests/qtest/qmp-test.c | 2 +- ui/gtk.c | 1 + qapi/Makefile.objs | 6 +- 11 files changed, 229 insertions(+), 217 deletions(-) create mode 100644 qapi/control.jsonqapi/control.json new file +0
-0qapi/control.json line 3
Quoted 3 lines
qapi/control.json new file +3
-0@@ -0,0 +1,218 @@ +# -*- Mode: Python -*- +# +Let's add a copyright notice:
Quoted 4 lines
# Copyright (C) 2011-2020 Red Hat, Inc.
#
# This work is licensed under the terms of the GNU GPL, version 2 or later. # See the COPYING file in the top-level directory.
I'm not adding anything new, but just moving code from a file that doesn't have a copyright notice. In fact, almost none of the schema files have a copyright notice. I'm not comfortable adding legal assertions without verifying that they are correct, and certainly not as a side-effect of a code movement patch. This would be an unrelated change.
I suggest that we leave this patch as is, and if you think copyright notices should be added, the correct information can be tracked down and added consistently for all schema files in a separate series.
Quoted 10 lines
qapi/control.json line 6
Quoted 3 lines
qapi/control.json new file +3
-0+## +# = Monitor definitions (shared between system emulator and tools) +##This comment does double-duty: it's for readers of this source file, and for readers of generated docs/interop/qemu-qmp-ref.*. It's okay for the former, but not the latter, as the resulting table of contents shows:
[...]
Quoted 3 lines
Proposed header:
# = QMP monitor control
Works for me.
Quoted 17 lines
qapi/qapi-schema.json line 109
Quoted 12 lines
qapi/qapi-schema.json +1
-0@@ -103,6 +103,7 @@ { 'include': 'qdev.json' } { 'include': 'machine.json' } { 'include': 'machine-target.json' } +{ 'include': 'control.json' } { 'include': 'misc.json' } { 'include': 'misc-target.json' } { 'include': 'audio.json' }This determines position within docs/interop/qemu-qmp-ref.*. Next to misc.json is the least change. Perhaps putting it next to introspect.json would be better.
Quoted 3 lines
If we split @quit off control.json, then we could include the .json providing @quit next to @stop & friends. Again, I'm not demanding such a split.
I'll put it before introspect.json for now.
I don't think the whole order is overly meaningful and it could use some rearrangement in general. Again, unrelated to this series.
Quoted 18 lines
Quoted 18 lines
monitor/monitor-internal.h +1
-0@@ -27,6 +27,7 @@#include "chardev/char-fe.h" #include "monitor/monitor.h" +#include "qapi/qapi-types-control.h" #include "qapi/qmp/dispatch.h" #include "qapi/qmp/json-parser.h" #include "qemu/readline.h" monitor/hmp-cmds.c +0
-0@@ -33,6 +33,7 @@#include "qapi/qapi-commands-char.h"
Quoted 8 lines
monitor/hmp-cmds.c line 39
Quoted 6 lines
monitor/hmp-cmds.c +1
-0#include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-net.h" #include "qapi/qapi-commands-rocker.h" #include "qapi/qapi-commands-run-state.h" Please keep the qapi/qapi-commands-* sorted, like you do ...
It is sorted! It's exactly where you would expect "-monitor"... *sigh*
/me goes back to finding each #include and moving it. /me hates renaming header files.
Quoted 19 lines
Quoted 7 lines
qapi/Makefile.objs +0
-0@@ -5,9 +5,9 @@ util-obj-y += opts-visitor.o qapi-clone-visitor.o util-obj-y += qmp-event.o util-obj-y += qapi-util.oqapi/Makefile.objs util-obj-y += opts-visitor.o qapi-clone-visitor.o · line 13
Quoted 10 lines
qapi/Makefile.objs +3
-3-QAPI_COMMON_MODULES = audio authz block-core block char common crypto -QAPI_COMMON_MODULES += dump error introspect job machine migration misc net -QAPI_COMMON_MODULES += qdev qom rdma rocker run-state sockets tpm +QAPI_COMMON_MODULES = audio authz block-core block char common control crypto +QAPI_COMMON_MODULES += dump error introspect job machine migration misc +QAPI_COMMON_MODULES += net qdev qom rdma rocker run-state sockets tpm QAPI_COMMON_MODULES += trace transaction ui QAPI_TARGET_MODULES = machine-target misc-target QAPI_MODULES = $(QAPI_COMMON_MODULES) $(QAPI_TARGET_MODULES)With the comments and the include directives tidied up:
Quoted 1 line
Reviewed-by Markus Armbruster <[email protected]>
Thanks. (I assume this means even without the copyright header.)
Kevin
Re: [PATCH v2 2/4] qapi: Create module 'control'
Quoted 49 lines · Kevin Wolf
Am 29.01.2020 um 09:35 hat Markus Armbruster geschrieben:
Quoted 36 lines
Quoted 28 lines · Kevin Wolf
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well.
Signed-off-by Kevin Wolf <[email protected]>--- qapi/control.json | 218 +++++++++++++++++++++++++++++++++++++ qapi/misc.json | 212 ------------------------------------ qapi/qapi-schema.json | 1 + monitor/monitor-internal.h | 1 + monitor/hmp-cmds.c | 1 + monitor/misc.c | 1 + monitor/qmp-cmds.c | 1 + monitor/qmp.c | 2 +- tests/qtest/qmp-test.c | 2 +- ui/gtk.c | 1 + qapi/Makefile.objs | 6 +- 11 files changed, 229 insertions(+), 217 deletions(-) create mode 100644 qapi/control.jsonqapi/control.json new file +0
-0qapi/control.json line 3
Quoted 3 lines
qapi/control.json new file +3
-0@@ -0,0 +1,218 @@ +# -*- Mode: Python -*- +# +Let's add a copyright notice:
Quoted 4 lines
# Copyright (C) 2011-2020 Red Hat, Inc.
#
# This work is licensed under the terms of the GNU GPL, version 2 or later. # See the COPYING file in the top-level directory.I'm not adding anything new, but just moving code from a file that doesn't have a copyright notice. In fact, almost none of the schema files have a copyright notice. I'm not comfortable adding legal assertions without verifying that they are correct, and certainly not as a side-effect of a code movement patch. This would be an unrelated change.
Quoted 3 lines
I suggest that we leave this patch as is, and if you think copyright notices should be added, the correct information can be tracked down and added consistently for all schema files in a separate series.
There is nothing to be tracked down. Anything that lacks an explicit copyright notice is under GPLv2+, as per LICENSE.
Quoted 33 lines
Quoted 10 lines
qapi/control.json line 6
Quoted 3 lines
qapi/control.json new file +3
-0+## +# = Monitor definitions (shared between system emulator and tools) +##This comment does double-duty: it's for readers of this source file, and for readers of generated docs/interop/qemu-qmp-ref.*. It's okay for the former, but not the latter, as the resulting table of contents shows:
[...]Quoted 3 lines
Proposed header:
# = QMP monitor control
Works for me.
Quoted 17 lines
qapi/qapi-schema.json line 109
Quoted 12 lines
qapi/qapi-schema.json +1
-0@@ -103,6 +103,7 @@ { 'include': 'qdev.json' } { 'include': 'machine.json' } { 'include': 'machine-target.json' } +{ 'include': 'control.json' } { 'include': 'misc.json' } { 'include': 'misc-target.json' } { 'include': 'audio.json' }This determines position within docs/interop/qemu-qmp-ref.*. Next to misc.json is the least change. Perhaps putting it next to introspect.json would be better.
Quoted 8 lines
Quoted 3 lines
If we split @quit off control.json, then we could include the .json providing @quit next to @stop & friends. Again, I'm not demanding such a split.
I'll put it before introspect.json for now.
I don't think the whole order is overly meaningful and it could use some rearrangement in general. Again, unrelated to this series.
Yes, the order could use some love.
Quoted 53 lines
Quoted 18 lines
Quoted 18 lines
monitor/monitor-internal.h +1
-0@@ -27,6 +27,7 @@#include "chardev/char-fe.h" #include "monitor/monitor.h" +#include "qapi/qapi-types-control.h" #include "qapi/qmp/dispatch.h" #include "qapi/qmp/json-parser.h" #include "qemu/readline.h" monitor/hmp-cmds.c +0
-0@@ -33,6 +33,7 @@#include "qapi/qapi-commands-char.h" Quoted 8 lines
monitor/hmp-cmds.c line 39
Quoted 6 lines
monitor/hmp-cmds.c +1
-0#include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-net.h" #include "qapi/qapi-commands-rocker.h" #include "qapi/qapi-commands-run-state.h" Please keep the qapi/qapi-commands-* sorted, like you do ...
It is sorted! It's exactly where you would expect "-monitor"... *sigh*
/me goes back to finding each #include and moving it. /me hates renaming header files.
Quoted 19 lines
Quoted 7 lines
qapi/Makefile.objs +0
-0@@ -5,9 +5,9 @@ util-obj-y += opts-visitor.o qapi-clone-visitor.o util-obj-y += qmp-event.o util-obj-y += qapi-util.oqapi/Makefile.objs util-obj-y += opts-visitor.o qapi-clone-visitor.o · line 13
Quoted 10 lines
qapi/Makefile.objs +3
-3-QAPI_COMMON_MODULES = audio authz block-core block char common crypto -QAPI_COMMON_MODULES += dump error introspect job machine migration misc net -QAPI_COMMON_MODULES += qdev qom rdma rocker run-state sockets tpm +QAPI_COMMON_MODULES = audio authz block-core block char common control crypto +QAPI_COMMON_MODULES += dump error introspect job machine migration misc +QAPI_COMMON_MODULES += net qdev qom rdma rocker run-state sockets tpm QAPI_COMMON_MODULES += trace transaction ui QAPI_TARGET_MODULES = machine-target misc-target QAPI_MODULES = $(QAPI_COMMON_MODULES) $(QAPI_TARGET_MODULES)With the comments and the include directives tidied up:
Quoted 1 line
Reviewed-by Markus Armbruster <[email protected]>
Quoted 1 line
Thanks. (I assume this means even without the copyright header.)
I'd prefer with, but I'll accept without.
Re: [PATCH v2 2/4] qapi: Create module 'control'
Am 29.01.2020 um 10:41 hat Markus Armbruster geschrieben:
Quoted 51 lines
Quoted 49 lines · Kevin Wolf
Am 29.01.2020 um 09:35 hat Markus Armbruster geschrieben:
Quoted 36 lines
Quoted 28 lines · Kevin Wolf
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well.
Signed-off-by Kevin Wolf <[email protected]>--- qapi/control.json | 218 +++++++++++++++++++++++++++++++++++++ qapi/misc.json | 212 ------------------------------------ qapi/qapi-schema.json | 1 + monitor/monitor-internal.h | 1 + monitor/hmp-cmds.c | 1 + monitor/misc.c | 1 + monitor/qmp-cmds.c | 1 + monitor/qmp.c | 2 +- tests/qtest/qmp-test.c | 2 +- ui/gtk.c | 1 + qapi/Makefile.objs | 6 +- 11 files changed, 229 insertions(+), 217 deletions(-) create mode 100644 qapi/control.jsonqapi/control.json new file +0
-0qapi/control.json line 3
Quoted 3 lines
qapi/control.json new file +3
-0@@ -0,0 +1,218 @@ +# -*- Mode: Python -*- +# +Let's add a copyright notice:
Quoted 4 lines
# Copyright (C) 2011-2020 Red Hat, Inc.
#
# This work is licensed under the terms of the GNU GPL, version 2 or later. # See the COPYING file in the top-level directory.I'm not adding anything new, but just moving code from a file that doesn't have a copyright notice. In fact, almost none of the schema files have a copyright notice. I'm not comfortable adding legal assertions without verifying that they are correct, and certainly not as a side-effect of a code movement patch. This would be an unrelated change.
Quoted 6 lines
Quoted 3 lines
I suggest that we leave this patch as is, and if you think copyright notices should be added, the correct information can be tracked down and added consistently for all schema files in a separate series.
There is nothing to be tracked down. Anything that lacks an explicit copyright notice is under GPLv2+, as per LICENSE.
The copyright holders should be tracked down rather than just putting "Red Hat" there, which is most likely wrong. Not that copyright notices anywhere else are much more complete, but they tend to be correct at least when they are added (i.e. usually when the file is created), so not updating them is the fault of the copyright holders that are missing in the notice.
But anyway, it's unrelated to this patch in either case.
Kevin
PATCH v2 3/4 monitor: Create monitor/qmp-cmds-control.c
In reply to Kevin WolfMove all of the QMP commands handlers to implement the 'control' module (qapi/control.json) that can be shared between the system emulator and tools such as a storage daemon to a new file monitor/qmp-cmds-control.c.
--- monitor/misc.c | 110 -------------------------- monitor/qmp-cmds-control.c | 153 +++++++++++++++++++++++++++++++++++++ monitor/qmp-cmds.c | 14 ---- monitor/Makefile.objs | 3 +- 4 files changed, 155 insertions(+), 125 deletions(-) create mode 100644 monitor/qmp-cmds-control.c
monitor/misc.c +0 -110
@@ -72,7 +72,6 @@#include "qapi/qapi-commands-misc.h" #include "qapi/qapi-commands-qom.h" #include "qapi/qapi-commands-trace.h" -#include "qapi/qapi-emit-events.h" #include "qapi/qapi-init-commands.h" #include "qapi/error.h" #include "qapi/qmp-event.h"
@@ -233,58 +232,6 @@ static void hmp_info_help(Monitor *mon, const QDict *qdict)help_cmd (mon,"info" ); } -static void query_commands_cb (QmpCommand *cmd,void *opaque) -{ -CommandInfoList *info, **list = opaque; - -if (!cmd->enabled) { -return ; - } - - info =g_malloc0 (sizeof (*info)); - info->value =g_malloc0 (sizeof (*info->value)); - info->value->name =g_strdup (cmd->name); - info->next = *list; - *list = info; -} - -CommandInfoList *qmp_query_commands (Error **errp) -{ -CommandInfoList *list =NULL ; -MonitorQMP *mon; - -assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); - -qmp_for_each_command (mon->commands, query_commands_cb, &list); - -return list; -} - -EventInfoList *qmp_query_events (Error **errp) -{ -/* -* TODO This deprecated command is the only user of -* QAPIEvent_str() and QAPIEvent_lookup[]. When the command goes, -* they should go, too. -*/ -EventInfoList *info, *ev_list =NULL ; -QAPIEvent e; - -for (e =0 ; e <QAPI_EVENT__MAX ; e++) { -const char *event_name =QAPIEvent_str (e); -assert (event_name !=NULL ); - info =g_malloc0 (sizeof (*info)); - info->value =g_malloc0 (sizeof (*info->value)); - info->value->name =g_strdup (event_name); - - info->next = ev_list; - ev_list = info; - } - -return ev_list; -} -/* * Minor hack: generated marshalling suppressed for this command * ('gen': false in the schema) so we can parse the JSON string
@@ -323,63 +270,6 @@ static void monitor_init_qmp_commands(void) qmp_marshal_qmp_capabilities, QCO_ALLOW_PRECONFIG); } -/* -* Accept QMP capabilities in @list for @mon. -* On success, set mon->qmp.capab[], and return true. -* On error, set @errp, and return false. -*/ -static bool qmp_caps_accept (MonitorQMP *mon,QMPCapabilityList *list, -Error **errp) -{ -GString *unavailable =NULL ; -bool capab[QMP_CAPABILITY__MAX ]; - -memset (capab,0 ,sizeof (capab)); - -for (; list; list = list->next) { -if (!mon->capab_offered[list->value]) { -if (!unavailable) { - unavailable =g_string_new (QMPCapability_str (list->value)); - }else { -g_string_append_printf (unavailable,", %s" , -QMPCapability_str (list->value)); - } - } - capab[list->value] = true; - } - -if (unavailable) { -error_setg (errp,"Capability %s not available" , unavailable->str); -g_string_free (unavailable, true); -return false; - } - -memcpy (mon->capab, capab,sizeof (capab)); -return true; -} - -void qmp_qmp_capabilities (bool has_enable,QMPCapabilityList *enable, -Error **errp) -{ -MonitorQMP *mon; - -assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); - -if (mon->commands == &qmp_commands) { -error_set (errp,ERROR_CLASS_COMMAND_NOT_FOUND , -"Capabilities negotiation is already complete, command " -"ignored" ); -return ; - } - -if (!qmp_caps_accept (mon, enable, errp)) { -return ; - } - - mon->commands = &qmp_commands; -} -/* Set the current CPU defined by the user. Callers must hold BQL. */ int monitor_set_cpu (int cpu_index) {
monitor/qmp-cmds-control.c new file +153 -0
153 lines not on this page · raw message
monitor/qmp-cmds.c +0 -14
@@ -15,7 +15,6 @@#include "qemu/osdep.h" #include "qemu-common.h" -#include "qemu-version.h" #include "qemu/cutils.h" #include "qemu/option.h" #include "monitor/monitor.h"
@@ -52,19 +51,6 @@ NameInfo *qmp_query_name(Error **errp)return info; } -VersionInfo *qmp_query_version (Error **errp) -{ -VersionInfo *info =g_new0 (VersionInfo,1 ); - - info->qemu =g_new0 (VersionTriple,1 ); - info->qemu->major =QEMU_VERSION_MAJOR ; - info->qemu->minor =QEMU_VERSION_MINOR ; - info->qemu->micro =QEMU_VERSION_MICRO ; - info->package =g_strdup (QEMU_PKGVERSION ); - -return info; -} -KvmInfo *qmp_query_kvm (Error **errp) {KvmInfo *info =g_malloc0 (sizeof (*info));
monitor/Makefile.objs +2 -1
@@ -1,3 +1,4 @@ obj-y += misc.o common-obj-y += monitor.o qmp.o hmp.o -common-obj-y += qmp-cmds.o hmp-cmds.o +common-obj-y += qmp-cmds.o qmp-cmds-control.o +common-obj-y += hmp-cmds.o
Signature · 1 line
2.20.1
Re: [PATCH v2 3/4] monitor: Create monitor/qmp-cmds-control.c
Quoted 6 lines · Kevin Wolf
Move all of the QMP commands handlers to implement the 'control' module (
qapi/control.json) that can be shared between the system emulator and tools such as a storage daemon to a new filemonitor/qmp-cmds-control.c.Signed-off-by Kevin Wolf <[email protected]>---
[...]
monitor/qmp-cmds-control.c line 2
Quoted 8 lines
monitor/qmp-cmds-control.c new file +2
-0@@ -0,0 +1,153 @@ +/* +* QMP commands related to the monitor (common functions for sysemu and tools)
Rather long line. Let's s/common functions for/common to/.
The parenthesis is aspirational. I'd add it when it becomes factual, but I'm willing to accept it even now.
[...]
With the comment tweak:
PATCH v2 4/4 monitor: Move qmp_query_qmp_schema to qmp-cmds-control.c
In reply to Kevin Wolfmonitor/misc.c contains code that works only in the system emulator, so it can't be linked to tools like a storage daemon. In order to make schema introspection available for tools, move the function to monitor/qmp-cmds-control.c, which can be linked into the storage daemon.
--- monitor/monitor-internal.h | 3 +++ monitor/misc.c | 16 ---------------- monitor/qmp-cmds-control.c | 16 ++++++++++++++++ 3 files changed, 19 insertions(+), 16 deletions(-)
monitor/monitor-internal.h +3 -0
@@ -180,4 +180,7 @@ void help_cmd(Monitor *mon, const char *name);void handle_hmp_command (MonitorHMP *mon,const char *cmdline);int hmp_compare_cmd (const char *name,const char *list); +void qmp_query_qmp_schema (QDict *qdict,QObject **ret_data, +Error **errp); +#endif
monitor/misc.c +0 -16
@@ -75,7 +75,6 @@#include "qapi/qapi-init-commands.h" #include "qapi/error.h" #include "qapi/qmp-event.h" -#include "qapi/qapi-introspect.h" #include "sysemu/cpus.h" #include "qemu/cutils.h" #include "tcg/tcg.h"
@@ -232,21 +231,6 @@ static void hmp_info_help(Monitor *mon, const QDict *qdict)help_cmd (mon,"info" ); } -/* -* Minor hack: generated marshalling suppressed for this command -* ('gen': false in the schema) so we can parse the JSON string -* directly into QObject instead of first parsing it with -* visit_type_SchemaInfoList() into a SchemaInfoList, then marshal it -* to QObject with generated output marshallers, every time. Instead, -* we do it in test-qobject-input-visitor.c, just to make sure -* qapi-gen.py's output actually conforms to the schema. -*/ -static void qmp_query_qmp_schema (QDict *qdict,QObject **ret_data, -Error **errp) -{ - *ret_data =qobject_from_qlit (&qmp_schema_qlit); -} -static void monitor_init_qmp_commands (void ) {/*
monitor/qmp-cmds-control.c +16 -0
@@ -29,6 +29,7 @@#include "qapi/error.h" #include "qapi/qapi-commands-control.h" #include "qapi/qapi-emit-events.h" +#include "qapi/qapi-introspect.h" /* * Accept QMP capabilities in @list for @mon.
@@ -151,3 +152,18 @@ EventInfoList *qmp_query_events(Error **errp)return ev_list; } + +/* +* Minor hack: generated marshalling suppressed for this command +* ('gen': false in the schema) so we can parse the JSON string +* directly into QObject instead of first parsing it with +* visit_type_SchemaInfoList() into a SchemaInfoList, then marshal it +* to QObject with generated output marshallers, every time. Instead, +* we do it in test-qobject-input-visitor.c, just to make sure +* qapi-gen.py's output actually conforms to the schema. +*/ +void qmp_query_qmp_schema (QDict *qdict,QObject **ret_data, +Error **errp) +{ + *ret_data =qobject_from_qlit (&qmp_schema_qlit); +}
Signature · 1 line
2.20.1
Re: [PATCH v2 4/4] monitor: Move qmp_query_qmp_schema to qmp-cmds-control.c
Quoted 6 lines · Kevin Wolf
monitor/misc.ccontains code that works only in the system emulator, so it can't be linked to tools like a storage daemon. In order to make schema introspection available for tools, move the function tomonitor/qmp-cmds-control.c, which can be linked into the storage daemon.Signed-off-by Kevin Wolf <[email protected]>