perf: Refactor the block info implementation
v5 cover perf: Refactor the block info implementation
This patch series refactors the block info functionalities to let them be used by other builtins and allow setting the output fmts flexibly.
It also supports the 'Sampled Cycles%' and 'Avg Cycles%' printed in colors.
v5:
---
Only change the patch "perf util: Flexible to set block info output formats". Other patches are not changed.
Jin Yao (4):
perf util: Move block_pair_cmp to block-info
perf util: Validate map/dso/sym before comparing blocks perf util: Flexible to set block info output formats perf util: Support color ops to print block percents in color
tools/perf/builtin-diff.c | 17 ------- tools/perf/builtin-report.c | 21 ++++++-- tools/perf/util/block-info.c | 99 ++++++++++++++++++++++++++---------- tools/perf/util/block-info.h | 9 +++- 4 files changed, 99 insertions(+), 47 deletions(-)
Signature · 1 line
2.17.1
PATCH v5 1/4 perf util: Move block_pair_cmp to block-info
block_pair_cmp() is a function which is used to compare two blocks. Moving it from builtin-diff.c to block-info.c to let it can be used by other builtins.
v4/v5:
------
No change.
v3:
---
Separate it from original patch for good tracking.
--- tools/perf/builtin-diff.c | 17 ----------------- tools/perf/util/block-info.c | 17 +++++++++++++++++ tools/perf/util/block-info.h | 2 ++ 3 files changed, 19 insertions(+), 17 deletions(-)
tools/perf/builtin-diff.c +0 -17
@@ -572,23 +572,6 @@ static void init_block_hist(struct block_hist *bh) bh->valid = true; } -static int block_pair_cmp (struct hist_entry *a,struct hist_entry *b) -{ -struct block_info *bi_a = a->block_info; -struct block_info *bi_b = b->block_info; -int cmp; - -if (!bi_a->sym || !bi_b->sym) -return -1 ; - - cmp =strcmp (bi_a->sym->name, bi_b->sym->name); - -if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) -return 0 ; - -return -1 ; -} -static struct hist_entry *get_block_pair (struct hist_entry *he,struct hists *hists_pair) {
tools/perf/util/block-info.c +17 -0
@@ -475,3 +475,20 @@ float block_info__total_cycles_percent(struct hist_entry *he)return 0.0 ; } + +int block_pair_cmp (struct hist_entry *a,struct hist_entry *b) +{ +struct block_info *bi_a = a->block_info; +struct block_info *bi_b = b->block_info; +int cmp; + +if (!bi_a->sym || !bi_b->sym) +return -1 ; + + cmp =strcmp (bi_a->sym->name, bi_b->sym->name); + +if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) +return 0 ; + +return -1 ; +}
tools/perf/util/block-info.h +2 -0
@@ -76,4 +76,6 @@ int report__browse_block_hists(struct block_hist *bh, float min_percent,float block_info__total_cycles_percent (struct hist_entry *he); +int block_pair_cmp (struct hist_entry *a,struct hist_entry *b); +#endif /* __PERF_BLOCK_H */
Signature · 1 line
2.17.1
Re: [PATCH v5 1/4] perf util: Move block_pair_cmp to block-info
Em Tue, Jan 28, 2020 at 08:55:53PM +0800, Jin Yao escreveu:
Quoted 52 lines
block_pair_cmp()is a function which is used to compare two blocks. Moving it frombuiltin-diff.ctoblock-info.cto let it can be used by other builtins.v4/v5:
------
No change.v3:
---
Separate it from original patch for good tracking.Signed-off-by Jin Yao <[email protected]>--- tools/perf/builtin-diff.c | 17 ----------------- tools/perf/util/block-info.c | 17 +++++++++++++++++ tools/perf/util/block-info.h | 2 ++ 3 files changed, 19 insertions(+), 17 deletions(-)tools/perf/builtin-diff.c +0
-17@@ -572,23 +572,6 @@ static void init_block_hist(struct block_hist *bh) bh->valid = true; } -static int block_pair_cmp (struct hist_entry *a,struct hist_entry *b) -{ -struct block_info *bi_a = a->block_info; -struct block_info *bi_b = b->block_info; -int cmp; - -if (!bi_a->sym || !bi_b->sym) -return -1 ; - - cmp =strcmp (bi_a->sym->name, bi_b->sym->name); - -if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) -return 0 ; - -return -1 ; -} -static struct hist_entry *get_block_pair (struct hist_entry *he,struct hists *hists_pair) {tools/perf/util/block-info.c +0
-0
tools/perf/util/block-info.c float block_info__total_cycles_percent(struct hist_entry *he) · line 479
Quoted 5 lines
tools/perf/util/block-info.c +2
-0@@ -475,3 +475,20 @@ float block_info__total_cycles_percent(struct hist_entry *he)return 0.0 ; } + +int block_pair_cmp (struct hist_entry *a,struct hist_entry *b)
First thing that came to mind was that hist_entry comparision functions had been changed to return int64_t recently, when I went to look at it I found this:
tools/perf/util/block-info.c
int64_t block_info__cmp(struct perf_hpp_fmt *fmt __maybe_unused,
struct hist_entry *left, struct hist_entry *right)
{
struct block_info *bi_l = left->block_info;
struct block_info *bi_r = right->block_info;
int cmp;.
.
.
Which look a bit more complete, can you check if that can be used instead or explain why my quick analysis of this is b0rken?
Perhaps we can have a __block_info__cmp() that doesn't receive the perf_hpp_fmt (that isn't even used above) so that the previous use of block_pair_cmp() can be replaced with __block_info__cmp() instead?
Thanks,
- Arnaldo
Quoted 29 lines
tools/perf/util/block-info.c +15
-0+{ +struct block_info *bi_a = a->block_info; +struct block_info *bi_b = b->block_info; +int cmp; + +if (!bi_a->sym || !bi_b->sym) +return -1 ; + + cmp =strcmp (bi_a->sym->name, bi_b->sym->name); + +if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) +return 0 ; + +return -1 ; +}tools/perf/util/block-info.h +2
-0@@ -76,4 +76,6 @@ int report__browse_block_hists(struct block_hist *bh, float min_percent,float block_info__total_cycles_percent (struct hist_entry *he); +int block_pair_cmp (struct hist_entry *a,struct hist_entry *b); +#endif /* __PERF_BLOCK_H */ Signature · 1 line
2.17.1
Signature · 1 line
- Arnaldo
Re: [PATCH v5 1/4] perf util: Move block_pair_cmp to block-info
Quoted 78 lines · Arnaldo Carvalho de Melo
Em Tue, Jan 28, 2020 at 08:55:53PM +0800, Jin Yao escreveu:
Quoted 52 lines
block_pair_cmp()is a function which is used to compare two blocks. Moving it frombuiltin-diff.ctoblock-info.cto let it can be used by other builtins.v4/v5:
------
No change.v3:
---
Separate it from original patch for good tracking.Signed-off-by Jin Yao <[email protected]>--- tools/perf/builtin-diff.c | 17 ----------------- tools/perf/util/block-info.c | 17 +++++++++++++++++ tools/perf/util/block-info.h | 2 ++ 3 files changed, 19 insertions(+), 17 deletions(-)tools/perf/builtin-diff.c +0
-17@@ -572,23 +572,6 @@ static void init_block_hist(struct block_hist *bh) bh->valid = true; } -static int block_pair_cmp (struct hist_entry *a,struct hist_entry *b) -{ -struct block_info *bi_a = a->block_info; -struct block_info *bi_b = b->block_info; -int cmp; - -if (!bi_a->sym || !bi_b->sym) -return -1 ; - - cmp =strcmp (bi_a->sym->name, bi_b->sym->name); - -if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) -return 0 ; - -return -1 ; -} -static struct hist_entry *get_block_pair (struct hist_entry *he,struct hists *hists_pair) {tools/perf/util/block-info.c +0
-0tools/perf/util/block-info.c float block_info__total_cycles_percent(struct hist_entry *he) · line 479
Quoted 5 lines
tools/perf/util/block-info.c +2
-0@@ -475,3 +475,20 @@ float block_info__total_cycles_percent(struct hist_entry *he)return 0.0 ; } + +int block_pair_cmp (struct hist_entry *a,struct hist_entry *b)First thing that came to mind was that
hist_entrycomparision functions had been changed to returnint64_trecently, when I went to look at it I found this:
tools/perf/util/block-info.c
int64_tblock_info__cmp(structperf_hpp_fmt*fmt__maybe_unused,
structhist_entry*left, structhist_entry*right){ struct block_info *bi_l = left->block_info; struct block_info *bi_r = right->block_info; int cmp;.
.
.Which look a bit more complete, can you check if that can be used instead or explain why my quick analysis of this is b0rken?
Quoted 8 lines
Perhaps we can have a
__block_info__cmp()that doesn't receive theperf_hpp_fmt(that isn't even used above) so that the previous use ofblock_pair_cmp()can be replaced with__block_info__cmp()instead?Thanks,
- Arnaldo
Hi Arnaldo,
I think it's a good idea to use __block_info__cmp() to replace the block_pair_cmp(). The block_info__cmp() is more comprehensive than block_pair_cmp() and we only need a bit change such as,
tools/perf/util/block-info.c +1 -1
@@ -74,7 +74,7 @@ int64_t block_info__cmp(struct perf_hpp_fmt *fmt __maybe_unused,if (!bi_l->sym || !bi_r->sym) {if (!bi_l->sym && !bi_r->sym) -return 0 ; +return -1 ;else if (!bi_l->sym)return -1 ;else
It returns -1 if both syms are NULL.
I will update the patchset.
Thanks
Jin Yao
Quoted 30 lines
Quoted 29 lines
tools/perf/util/block-info.c +15
-0+{ +struct block_info *bi_a = a->block_info; +struct block_info *bi_b = b->block_info; +int cmp; + +if (!bi_a->sym || !bi_b->sym) +return -1 ; + + cmp =strcmp (bi_a->sym->name, bi_b->sym->name); + +if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) +return 0 ; + +return -1 ; +}tools/perf/util/block-info.h +2
-0@@ -76,4 +76,6 @@ int report__browse_block_hists(struct block_hist *bh, float min_percent,float block_info__total_cycles_percent (struct hist_entry *he); +int block_pair_cmp (struct hist_entry *a,struct hist_entry *b); +#endif /* __PERF_BLOCK_H */ Signature · 1 line
2.17.1
PATCH v5 2/4 perf util: Validate map/dso/sym before comparing blocks
In reply to Jin Yaoblock_pair_cmp() is a function which is used to compare two blocks. This patch checks the validity of map, dso and sym before comparing blocks.
If they are invalid, we will not compare the address because the address might not make sense.
Another change is it returns cmp if sym->name is not equal.
This patch uses "strcmp(ms_p->sym->name, ms_h->sym->name)" is because we have checked ms->sym yet, we don't need an additional checking for bi->sym.
v4/v5:
------
No change.
v3:
---
Separate from original patch.
Return cmp if it's not 0.
--- tools/perf/util/block-info.c | 18 ++++++++++++------ tools/perf/util/block-info.h | 2 +- 2 files changed, 13 insertions(+), 7 deletions(-)
tools/perf/util/block-info.c +12 -6
@@ -476,18 +476,24 @@ float block_info__total_cycles_percent(struct hist_entry *he)return 0.0 ; } -int block_pair_cmp (struct hist_entry *a,struct hist_entry *b) +int block_pair_cmp (struct hist_entry *pair,struct hist_entry *he) { -struct block_info *bi_a = a->block_info; -struct block_info *bi_b = b->block_info; +struct block_info *bi_p = pair->block_info; +struct block_info *bi_h = he->block_info; +struct map_symbol *ms_p = &pair->ms; +struct map_symbol *ms_h = &he->ms;int cmp; -if (!bi_a->sym || !bi_b->sym) +if (!ms_p->map || !ms_p->map->dso || !ms_p->sym || + !ms_h->map || !ms_h->map->dso || !ms_h->sym) {return -1 ; + } - cmp =strcmp (bi_a->sym->name, bi_b->sym->name); + cmp =strcmp (ms_p->sym->name, ms_h->sym->name); +if (cmp) +return cmp; -if ((!cmp) && (bi_a->start == bi_b->start) && (bi_a->end == bi_b->end)) +if ((bi_p->start == bi_h->start) && (bi_p->end == bi_h->end))return 0 ;return -1 ;
tools/perf/util/block-info.h +1 -1
@@ -76,6 +76,6 @@ int report__browse_block_hists(struct block_hist *bh, float min_percent,float block_info__total_cycles_percent (struct hist_entry *he); -int block_pair_cmp (struct hist_entry *a,struct hist_entry *b); +int block_pair_cmp (struct hist_entry *pair,struct hist_entry *he);#endif /* __PERF_BLOCK_H */
Signature · 1 line
2.17.1
PATCH v5 3/4 perf util: Flexible to set block info output formats
In reply to Jin YaoCurrently we use a predefined array to set the block info output formats, it's fixed and inflexible.
This patch adds two parameters "block_hpps" and "nr_hpps" in block_info__create_report and other static functions, in order to let user decide which columns to report and with specified report ordering. It should be more flexible.
Buffers will be allocated to contain the new fmts, of course, we need to release them before perf exits.
v5:
---
Don't need to call hists__delete_entries() after printing the block hists, because we will release the block hists in block_info__free_report().
v4:
---
Keep fmts in struct block_report as an array, instead of allocaing it. That's we don't need the release code.
v3:
---
No change.
v2:
---
New patch created in v2.
--- tools/perf/builtin-report.c | 21 ++++++++++++--- tools/perf/util/block-info.c | 51 +++++++++++++++++++++++++----------- tools/perf/util/block-info.h | 7 ++++- 3 files changed, 59 insertions(+), 20 deletions(-)
tools/perf/builtin-report.c +18 -3
@@ -104,6 +104,7 @@ struct report {bool symbol_ipc;bool total_cycles_mode;struct block_report *block_reports; +int nr_block_reports; };static int report__config (const char *var,const char *value,void *cb)
@@ -966,8 +967,19 @@ static int __cmd_report(struct report *rep)report__output_resort (rep);if (rep->total_cycles_mode) { +int block_hpps[6 ] = { +PERF_HPP_REPORT__BLOCK_TOTAL_CYCLES_PCT , +PERF_HPP_REPORT__BLOCK_LBR_CYCLES , +PERF_HPP_REPORT__BLOCK_CYCLES_PCT , +PERF_HPP_REPORT__BLOCK_AVG_CYCLES , +PERF_HPP_REPORT__BLOCK_RANGE , +PERF_HPP_REPORT__BLOCK_DSO , + }; + rep->block_reports =block_info__create_report (session->evlist, - rep->total_cycles); + rep->total_cycles, + block_hpps,6 , + &rep->nr_block_reports);if (!rep->block_reports)return -1 ; }
@@ -1551,8 +1563,11 @@ int cmd_report(int argc, const char **argv)zfree (&report.ptime_range); } -if (report.block_reports) -zfree (&report.block_reports); +if (report.block_reports) { +block_info__free_report (report.block_reports, + report.nr_block_reports); + report.block_reports =NULL ; + }zstd_fini (&(session->zstd_data));perf_session__delete (session);
tools/perf/util/block-info.c +35 -16
110 lines not on this page · raw message
tools/perf/util/block-info.h +6 -1
@@ -45,6 +45,7 @@ struct block_report {struct block_hist hist;u64 cycles;struct block_fmt fmts[PERF_HPP_REPORT__BLOCK_MAX_INDEX ]; +int nr_fmts; };struct block_hist ;
@@ -68,7 +69,11 @@ int block_info__process_sym(struct hist_entry *he, struct block_hist *bh, u64 *block_cycles_aggr, u64 total_cycles);struct block_report *block_info__create_report (struct evlist *evlist, -u64 total_cycles); +u64 total_cycles, +int *block_hpps,int nr_hpps, +int *nr_reps); + +void block_info__free_report (struct block_report *reps,int nr_reps); int report__browse_block_hists(struct block_hist *bh, float min_percent, struct evsel *evsel, struct perf_env *env,
Signature · 1 line
2.17.1
PATCH v5 4/4 perf util: Support color ops to print block percents in color
In reply to Jin YaoIt would be nice to print the block percents with colors.
This patch supports the 'Sampled Cycles%' and 'Avg Cycles%' printed in colors.
For example,
perf record -b ...
perf report --total-cycles or perf report --total-cycles --stdio
percent > 5%, colored in red percent > 0.5%, colored in green percent < 0.5%, default color
v3/v4/v5:
---------
No change
v2:
---
No functional change
--- tools/perf/util/block-info.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
tools/perf/util/block-info.c +15 -10
@@ -185,6 +185,17 @@ static int block_column_width(struct perf_hpp_fmt *fmt,return block_fmt->width; } +static int color_pct (struct perf_hpp *hpp,int width,double pct) +{ +#ifdef HAVE_SLANG_SUPPORT +if (use_browser) { +return __hpp__slsmg_color_printf (hpp,"%*.2f%%" , + width -1 , pct); + } +#endif +return hpp_color_scnprintf (hpp,"%*.2f%%" , width -1 , pct); +} +static int block_total_cycles_pct_entry (struct perf_hpp_fmt *fmt,struct perf_hpp *hpp,struct hist_entry *he)
@@ -192,14 +203,11 @@ static int block_total_cycles_pct_entry(struct perf_hpp_fmt *fmt, struct block_fmt *block_fmt = container_of(fmt, struct block_fmt, fmt);struct block_info *bi = he->block_info;double ratio =0.0 ; -char buf[16 ];if (block_fmt->total_cycles) ratio = (double )bi->cycles / (double )block_fmt->total_cycles; -sprintf (buf,"%.2f%%" ,100.0 * ratio); - -return scnprintf (hpp->buf, hpp->size,"%*s" , block_fmt->width, buf); +return color_pct (hpp, block_fmt->width,100.0 * ratio); } static int64_t block_total_cycles_pct_sort(struct perf_hpp_fmt *fmt,
@@ -252,16 +260,13 @@ static int block_cycles_pct_entry(struct perf_hpp_fmt *fmt,struct block_info *bi = he->block_info;double ratio =0.0 ;u64 avg; -char buf[16 ];if (block_fmt->block_cycles && bi->num_aggr) { avg = bi->cycles_aggr / bi->num_aggr; ratio = (double )avg / (double )block_fmt->block_cycles; } -sprintf (buf,"%.2f%%" ,100.0 * ratio); - -return scnprintf (hpp->buf, hpp->size,"%*s" , block_fmt->width, buf); +return color_pct (hpp, block_fmt->width,100.0 * ratio); } static int block_avg_cycles_entry(struct perf_hpp_fmt *fmt,
@@ -348,7 +353,7 @@ static void hpp_register(struct block_fmt *block_fmt, int idx,switch (idx) {case PERF_HPP_REPORT__BLOCK_TOTAL_CYCLES_PCT : - fmt->entry = block_total_cycles_pct_entry; + fmt->color = block_total_cycles_pct_entry; fmt->cmp = block_info__cmp; fmt->sort = block_total_cycles_pct_sort;break ;
@@ -356,7 +361,7 @@ static void hpp_register(struct block_fmt *block_fmt, int idx, fmt->entry = block_cycles_lbr_entry;break ;case PERF_HPP_REPORT__BLOCK_CYCLES_PCT : - fmt->entry = block_cycles_pct_entry; + fmt->color = block_cycles_pct_entry;break ;case PERF_HPP_REPORT__BLOCK_AVG_CYCLES : fmt->entry = block_avg_cycles_entry;
Signature · 1 line
2.17.1
Quoted 11 lines · Jin Yao
This patch series refactors the block info functionalities to let them be used by other builtins and allow setting the output fmts flexibly.
It also supports the 'Sampled Cycles%' and 'Avg Cycles%' printed in colors.
v5:
---
Only change the patch "perf util: Flexible to set block info output formats". Other patches are not changed.
Quoted 5 lines
Jin Yao (4):
perf util: Moveblock_pair_cmpto block-info
perf util: Validate map/dso/sym before comparing blocks perf util: Flexible to set block info output formats perf util: Support color ops to print block percents in color
thanks,
jirka
Quoted 10 lines
tools/perf/builtin-diff.c | 17 ------- tools/perf/builtin-report.c | 21 ++++++-- tools/perf/util/block-info.c | 99 ++++++++++++++++++++++++++---------- tools/perf/util/block-info.h | 9 +++- 4 files changed, 99 insertions(+), 47 deletions(-)Signature · 1 line
2.17.1