Skip to contentSkip to conversation

arm64: use mov_q instead of literal ldr

PATCH Applied Rémi Denis-Courmont 3 participants 3 messages Mar 4, 2020 – Mar 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 3/3 arm64: use mov_q instead of literal ldr

From: Remi Denis-Courmont <[email protected]>

In practice, this requires only 2 instructions, or even only 1 for the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted to mov_q by 95b3f74bec203804658e17f86fe20755bb8abcb9.

---
 arch/arm64/kernel/cpu-reset.S       |  2 +-
 arch/arm64/kernel/hyp-stub.S        |  2 +-
 arch/arm64/kernel/relocate_kernel.S |  4 +---
 arch/arm64/kvm/hyp-init.S           | 10 ++++------
 arch/arm64/mm/proc.S                |  2 +-
 5 files changed, 8 insertions(+), 12 deletions(-)
arch/arm64/kernel/cpu-reset.S +1 -1
index 32c7bf858dd9..38087b4c0432 100644
@@ -32,7 +32,7 @@
 ENTRY(__cpu_soft_restart)
 	/* Clear sctlr_el1 flags. */
 	mrs	x12, sctlr_el1
-	ldr	x13, =SCTLR_ELx_FLAGS
+	mov_q	x13, SCTLR_ELx_FLAGS
 	bic	x12, x12, x13
 	pre_disable_mmu_workaround
 	msr	sctlr_el1, x12
arch/arm64/kernel/hyp-stub.S +1 -1
index 73d46070b315..e473ead806ed 100644
@@ -63,7 +63,7 @@ el1_sync:
 	beq	9f				// Nothing to reset!
 
 	/* Someone called kvm_call_hyp() against the hyp-stub... */
-	ldr	x0, =HVC_STUB_ERR
+	mov_q	x0, HVC_STUB_ERR
 	eret
 
 9:	mov	x0, xzr
arch/arm64/kernel/relocate_kernel.S +1 -3
index c1d7db71a726..c40ce496c78b 100644
@@ -41,7 +41,7 @@ ENTRY(arm64_relocate_new_kernel)
 	cmp	x0, #CurrentEL_EL2
 	b.ne	1f
 	mrs	x0, sctlr_el2
-	ldr	x1, =SCTLR_ELx_FLAGS
+	mov_q	x1, SCTLR_ELx_FLAGS
 	bic	x0, x0, x1
 	pre_disable_mmu_workaround
 	msr	sctlr_el2, x0
@@ -113,8 +113,6 @@ ENTRY(arm64_relocate_new_kernel)
 
 ENDPROC(arm64_relocate_new_kernel)
 
-.ltorg
-
 .align 3	/* To keep the 64-bit values below naturally aligned. */
 
 .Lcopy_end:
arch/arm64/kvm/hyp-init.S +4 -6
index 160be2b4696d..37d7dc5ec10d 100644
@@ -60,7 +60,7 @@ alternative_else_nop_endif
 	msr	ttbr0_el2, x4
 
 	mrs	x4, tcr_el1
-	ldr	x5, =TCR_EL2_MASK
+	mov_q	x5, TCR_EL2_MASK
 	and	x4, x4, x5
 	mov	x5, #TCR_EL2_RES1
 	orr	x4, x4, x5
@@ -102,7 +102,7 @@ alternative_else_nop_endif
 	 * as well as the EE bit on BE. Drop the A flag since the compiler
 	 * is allowed to generate unaligned accesses.
 	 */
-	ldr	x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
+	mov_q	x4, (SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
 CPU_BE(	orr	x4, x4, #SCTLR_ELx_EE)
 	msr	sctlr_el2, x4
 	isb
@@ -142,7 +142,7 @@ reset:
 	 * case we coming via HVC_SOFT_RESTART.
 	 */
 	mrs	x5, sctlr_el2
-	ldr	x6, =SCTLR_ELx_FLAGS
+	mov_q	x6, SCTLR_ELx_FLAGS
 	bic	x5, x5, x6		// Clear SCTL_M and etc
 	pre_disable_mmu_workaround
 	msr	sctlr_el2, x5
@@ -155,11 +155,9 @@ reset:
 	eret
 
 1:	/* Bad stub call */
-	ldr	x0, =HVC_STUB_ERR
+	mov_q	x0, HVC_STUB_ERR
 	eret
 
 ENDPROC(__kvm_handle_stub_hvc)
 
-	.ltorg
-
 	.popsection
arch/arm64/mm/proc.S +1 -1
index 76899c6eee2b..1df303405223 100644
@@ -408,7 +408,7 @@ SYM_FUNC_START(__cpu_setup)
 	 * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
 	 * both user and kernel.
 	 */
-	ldr	x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
+	mov_q	x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
 			TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
 			TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS
 	tcr_clear_errata_bits x10, x9, x5
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
reviewer Acked-by on v1 3/3
#1 lore raw
Quoted 8 lines · Rémi Denis-Courmont

From: Remi Denis-Courmont <[email protected]>

In practice, this requires only 2 instructions, or even only 1 for the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted to mov_q by 95b3f74bec203804658e17f86fe20755bb8abcb9.

FWIW, this looks reasonable to me (even without patch 1), so:

Mark.

Quoted 121 lines
---
 arch/arm64/kernel/cpu-reset.S       |  2 +-
 arch/arm64/kernel/hyp-stub.S        |  2 +-
 arch/arm64/kernel/relocate_kernel.S |  4 +---
 arch/arm64/kvm/hyp-init.S           | 10 ++++------
 arch/arm64/mm/proc.S                |  2 +-
 5 files changed, 8 insertions(+), 12 deletions(-)
arch/arm64/kernel/cpu-reset.S +1 -1
index 32c7bf858dd9..38087b4c0432 100644
@@ -32,7 +32,7 @@
 ENTRY(__cpu_soft_restart)
 	/* Clear sctlr_el1 flags. */
 	mrs	x12, sctlr_el1
-	ldr	x13, =SCTLR_ELx_FLAGS
+	mov_q	x13, SCTLR_ELx_FLAGS
 	bic	x12, x12, x13
 	pre_disable_mmu_workaround
 	msr	sctlr_el1, x12
arch/arm64/kernel/hyp-stub.S +1 -1
index 73d46070b315..e473ead806ed 100644
@@ -63,7 +63,7 @@ el1_sync:
 	beq	9f				// Nothing to reset!
 
 	/* Someone called kvm_call_hyp() against the hyp-stub... */
-	ldr	x0, =HVC_STUB_ERR
+	mov_q	x0, HVC_STUB_ERR
 	eret
 
 9:	mov	x0, xzr
arch/arm64/kernel/relocate_kernel.S +1 -3
index c1d7db71a726..c40ce496c78b 100644
@@ -41,7 +41,7 @@ ENTRY(arm64_relocate_new_kernel)
 	cmp	x0, #CurrentEL_EL2
 	b.ne	1f
 	mrs	x0, sctlr_el2
-	ldr	x1, =SCTLR_ELx_FLAGS
+	mov_q	x1, SCTLR_ELx_FLAGS
 	bic	x0, x0, x1
 	pre_disable_mmu_workaround
 	msr	sctlr_el2, x0
@@ -113,8 +113,6 @@ ENTRY(arm64_relocate_new_kernel)
 
 ENDPROC(arm64_relocate_new_kernel)
 
-.ltorg
-
 .align 3	/* To keep the 64-bit values below naturally aligned. */
 
 .Lcopy_end:
arch/arm64/kvm/hyp-init.S +4 -6
index 160be2b4696d..37d7dc5ec10d 100644
@@ -60,7 +60,7 @@ alternative_else_nop_endif
 	msr	ttbr0_el2, x4
 
 	mrs	x4, tcr_el1
-	ldr	x5, =TCR_EL2_MASK
+	mov_q	x5, TCR_EL2_MASK
 	and	x4, x4, x5
 	mov	x5, #TCR_EL2_RES1
 	orr	x4, x4, x5
@@ -102,7 +102,7 @@ alternative_else_nop_endif
 	 * as well as the EE bit on BE. Drop the A flag since the compiler
 	 * is allowed to generate unaligned accesses.
 	 */
-	ldr	x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
+	mov_q	x4, (SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
 CPU_BE(	orr	x4, x4, #SCTLR_ELx_EE)
 	msr	sctlr_el2, x4
 	isb
@@ -142,7 +142,7 @@ reset:
 	 * case we coming via HVC_SOFT_RESTART.
 	 */
 	mrs	x5, sctlr_el2
-	ldr	x6, =SCTLR_ELx_FLAGS
+	mov_q	x6, SCTLR_ELx_FLAGS
 	bic	x5, x5, x6		// Clear SCTL_M and etc
 	pre_disable_mmu_workaround
 	msr	sctlr_el2, x5
@@ -155,11 +155,9 @@ reset:
 	eret
 
 1:	/* Bad stub call */
-	ldr	x0, =HVC_STUB_ERR
+	mov_q	x0, HVC_STUB_ERR
 	eret
 
 ENDPROC(__kvm_handle_stub_hvc)
 
-	.ltorg
-
 	.popsection
arch/arm64/mm/proc.S +1 -1
index 76899c6eee2b..1df303405223 100644
@@ -408,7 +408,7 @@ SYM_FUNC_START(__cpu_setup)
 	 * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
 	 * both user and kernel.
 	 */
-	ldr	x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
+	mov_q	x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
 			TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
 			TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS
 	tcr_clear_errata_bits x10, x9, x5
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

maintainer Applied
#2 lore raw
In reply to Rémi Denis-Courmont
Quoted 8 lines · Rémi Denis-Courmont

From: Remi Denis-Courmont <[email protected]>

In practice, this requires only 2 instructions, or even only 1 for the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted to mov_q by 95b3f74bec203804658e17f86fe20755bb8abcb9.

Queued for 5.7. Thanks.

Signature · 6 lines
Catalin

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel