arm64: use mov_q instead of literal ldr
PATCH 3/3 arm64: use mov_q instead of literal ldr
From: Remi Denis-Courmont <[email protected]>
In practice, this requires only 2 instructions, or even only 1 for the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted to mov_q by 95b3f74bec203804658e17f86fe20755bb8abcb9.
--- arch/arm64/kernel/cpu-reset.S | 2 +- arch/arm64/kernel/hyp-stub.S | 2 +- arch/arm64/kernel/relocate_kernel.S | 4 +--- arch/arm64/kvm/hyp-init.S | 10 ++++------ arch/arm64/mm/proc.S | 2 +- 5 files changed, 8 insertions(+), 12 deletions(-)
arch/arm64/kernel/cpu-reset.S +1 -1
@@ -32,7 +32,7 @@ ENTRY(__cpu_soft_restart) /* Clear sctlr_el1 flags. */ mrs x12, sctlr_el1 - ldr x13, =SCTLR_ELx_FLAGS + mov_q x13, SCTLR_ELx_FLAGS bic x12, x12, x13 pre_disable_mmu_workaround msr sctlr_el1, x12
arch/arm64/kernel/hyp-stub.S +1 -1
@@ -63,7 +63,7 @@ el1_sync: beq 9f // Nothing to reset! /* Someone called kvm_call_hyp() against the hyp-stub... */ - ldr x0, =HVC_STUB_ERR + mov_q x0, HVC_STUB_ERR eret 9: mov x0, xzr
arch/arm64/kernel/relocate_kernel.S +1 -3
@@ -41,7 +41,7 @@ ENTRY(arm64_relocate_new_kernel) cmp x0, #CurrentEL_EL2 b.ne 1f mrs x0, sctlr_el2 - ldr x1, =SCTLR_ELx_FLAGS + mov_q x1, SCTLR_ELx_FLAGS bic x0, x0, x1 pre_disable_mmu_workaround msr sctlr_el2, x0
@@ -113,8 +113,6 @@ ENTRY(arm64_relocate_new_kernel) ENDPROC(arm64_relocate_new_kernel) -.ltorg - .align 3 /* To keep the 64-bit values below naturally aligned. */ .Lcopy_end:
arch/arm64/kvm/hyp-init.S +4 -6
@@ -60,7 +60,7 @@ alternative_else_nop_endif msr ttbr0_el2, x4 mrs x4, tcr_el1 - ldr x5, =TCR_EL2_MASK + mov_q x5, TCR_EL2_MASK and x4, x4, x5 mov x5, #TCR_EL2_RES1 orr x4, x4, x5
@@ -102,7 +102,7 @@ alternative_else_nop_endif * as well as the EE bit on BE. Drop the A flag since the compiler * is allowed to generate unaligned accesses. */ - ldr x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A)) + mov_q x4, (SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A)) CPU_BE( orr x4, x4, #SCTLR_ELx_EE) msr sctlr_el2, x4 isb
@@ -142,7 +142,7 @@ reset: * case we coming via HVC_SOFT_RESTART. */ mrs x5, sctlr_el2 - ldr x6, =SCTLR_ELx_FLAGS + mov_q x6, SCTLR_ELx_FLAGS bic x5, x5, x6 // Clear SCTL_M and etc pre_disable_mmu_workaround msr sctlr_el2, x5
@@ -155,11 +155,9 @@ reset: eret 1: /* Bad stub call */ - ldr x0, =HVC_STUB_ERR + mov_q x0, HVC_STUB_ERR eret ENDPROC(__kvm_handle_stub_hvc) - .ltorg - .popsection
arch/arm64/mm/proc.S +1 -1
@@ -408,7 +408,7 @@ SYM_FUNC_START(__cpu_setup) * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for * both user and kernel. */ - ldr x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ + mov_q x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \ TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS tcr_clear_errata_bits x10, x9, x5
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 8 lines · Rémi Denis-Courmont
From: Remi Denis-Courmont <[email protected]>
In practice, this requires only 2 instructions, or even only 1 for the
idmap_pg_dirsize (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted tomov_qby95b3f74bec203804658e17f86fe20755bb8abcb9.Signed-off-by Remi Denis-Courmont <[email protected]>
FWIW, this looks reasonable to me (even without patch 1), so:
Mark.
Quoted 121 lines
--- arch/arm64/kernel/cpu-reset.S | 2 +- arch/arm64/kernel/hyp-stub.S | 2 +- arch/arm64/kernel/relocate_kernel.S | 4 +--- arch/arm64/kvm/hyp-init.S | 10 ++++------ arch/arm64/mm/proc.S | 2 +- 5 files changed, 8 insertions(+), 12 deletions(-)arch/arm64/kernel/cpu-reset.S +1
-1@@ -32,7 +32,7 @@ ENTRY(__cpu_soft_restart) /* Clear sctlr_el1 flags. */ mrs x12, sctlr_el1 - ldr x13, =SCTLR_ELx_FLAGS + mov_q x13, SCTLR_ELx_FLAGS bic x12, x12, x13 pre_disable_mmu_workaround msr sctlr_el1, x12arch/arm64/kernel/hyp-stub.S +1
-1@@ -63,7 +63,7 @@ el1_sync: beq 9f // Nothing to reset! /* Someone called kvm_call_hyp() against the hyp-stub... */ - ldr x0, =HVC_STUB_ERR + mov_q x0, HVC_STUB_ERR eret 9: mov x0, xzrarch/arm64/kernel/relocate_kernel.S +1
-3@@ -41,7 +41,7 @@ ENTRY(arm64_relocate_new_kernel) cmp x0, #CurrentEL_EL2 b.ne 1f mrs x0, sctlr_el2 - ldr x1, =SCTLR_ELx_FLAGS + mov_q x1, SCTLR_ELx_FLAGS bic x0, x0, x1 pre_disable_mmu_workaround msr sctlr_el2, x0@@ -113,8 +113,6 @@ ENTRY(arm64_relocate_new_kernel) ENDPROC(arm64_relocate_new_kernel) -.ltorg - .align 3 /* To keep the 64-bit values below naturally aligned. */ .Lcopy_end:arch/arm64/kvm/hyp-init.S +4
-6@@ -60,7 +60,7 @@ alternative_else_nop_endif msr ttbr0_el2, x4 mrs x4, tcr_el1 - ldr x5, =TCR_EL2_MASK + mov_q x5, TCR_EL2_MASK and x4, x4, x5 mov x5, #TCR_EL2_RES1 orr x4, x4, x5@@ -102,7 +102,7 @@ alternative_else_nop_endif * as well as the EE bit on BE. Drop the A flag since the compiler * is allowed to generate unaligned accesses. */ - ldr x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A)) + mov_q x4, (SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A)) CPU_BE( orr x4, x4, #SCTLR_ELx_EE) msr sctlr_el2, x4 isb@@ -142,7 +142,7 @@ reset: * case we coming via HVC_SOFT_RESTART. */ mrs x5, sctlr_el2 - ldr x6, =SCTLR_ELx_FLAGS + mov_q x6, SCTLR_ELx_FLAGS bic x5, x5, x6 // Clear SCTL_M and etc pre_disable_mmu_workaround msr sctlr_el2, x5@@ -155,11 +155,9 @@ reset: eret 1: /* Bad stub call */ - ldr x0, =HVC_STUB_ERR + mov_q x0, HVC_STUB_ERR eret ENDPROC(__kvm_handle_stub_hvc) - .ltorg - .popsectionarch/arm64/mm/proc.S +1
-1@@ -408,7 +408,7 @@ SYM_FUNC_START(__cpu_setup) * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for * both user and kernel. */ - ldr x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ + mov_q x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \ TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS tcr_clear_errata_bits x10, x9, x5Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 8 lines · Rémi Denis-Courmont
From: Remi Denis-Courmont <[email protected]>
In practice, this requires only 2 instructions, or even only 1 for the
idmap_pg_dirsize (with 4 or 64 KiB pages). Only the MAIR values needed more than 2 instructions and it was already converted tomov_qby95b3f74bec203804658e17f86fe20755bb8abcb9.Signed-off-by Remi Denis-Courmont <[email protected]>
Queued for 5.7. Thanks.
Signature · 6 lines
Catalin _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel