Skip to contentSkip to conversation

ARM: socfpga: Enable DM RTC bootcount on ABB SECU1

PATCH New Marek Vasut 2 participants 2 messages Mar 6, 2020 – Mar 9, 2020 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: socfpga: Enable DM RTC bootcount on ABB SECU1

Add and enable RTC-backed boot counter on ABB SECU1 platform.

Cc Ley Foon Tan <[email protected]>
Cc Simon Goldschmidt <[email protected]>
---
 arch/arm/dts/socfpga_arria5_secu1.dts | 6 ++++++
 configs/socfpga_secu1_defconfig       | 5 +++++
 2 files changed, 11 insertions(+)
arch/arm/dts/socfpga_arria5_secu1.dts +6 -0
index dadf766682..820e29ad6d 100644
@@ -31,6 +31,12 @@
 		spi0 = &spi1;
 	};
 
+	bootcount at 0 {
+		compatible = "u-boot,bootcount-rtc";
+		rtc = <&rtc>;
+		offset = <0x9e>;
+	};
+
 	i2c_gpio: i2c at 0 {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
configs/socfpga_secu1_defconfig +5 -0
index 230959ec86..fcb38f1a41 100644
@@ -48,6 +48,9 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_SPL_BLK is not set
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_DM_BOOTCOUNT=y
+CONFIG_DM_BOOTCOUNT_RTC=y
 CONFIG_DWAPB_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -76,6 +79,8 @@ CONFIG_PHY_GIGE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_DM_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_M41T62=y
 CONFIG_SPI=y
 CONFIG_SPI_MEM=y
 CONFIG_DESIGNWARE_SPI=y
Signature · 1 line
2.25.0
#1 lore raw

PATCH 1/1 ARM: socfpga: Enable DM RTC bootcount on ABB SECU1

Quoted 11 lines

-----Original Message-----
From: Marek Vasut <[email protected]>
Sent: Saturday, March 7, 2020 4:52 AM
To: u-boot at lists.denx.de
Cc: Marek Vasut <[email protected]>; Tan, Ley Foon <[email protected]>; Simon Goldschmidt <[email protected]>
Subject: [PATCH] ARM: socfpga: Enable DM RTC bootcount on ABB SECU1

Quoted 5 lines

Add and enable RTC-backed boot counter on ABB SECU1 platform.

Cc Ley Foon Tan <[email protected]>
Cc Simon Goldschmidt <[email protected]>

Regards
Ley Foon