ARM: socfpga: Enable DM RTC bootcount on ABB SECU1
PATCH 1/1 ARM: socfpga: Enable DM RTC bootcount on ABB SECU1
Add and enable RTC-backed boot counter on ABB SECU1 platform.
Signed-off-by Marek Vasut <[email protected]>
Cc Ley Foon Tan <[email protected]>
Cc Simon Goldschmidt <[email protected]>
--- arch/arm/dts/socfpga_arria5_secu1.dts | 6 ++++++ configs/socfpga_secu1_defconfig | 5 +++++ 2 files changed, 11 insertions(+)
arch/arm/dts/socfpga_arria5_secu1.dts +6 -0
@@ -31,6 +31,12 @@ spi0 = &spi1; }; + bootcount at 0 { + compatible = "u-boot,bootcount-rtc"; + rtc = <&rtc>; + offset = <0x9e>; + }; + i2c_gpio: i2c at 0 { compatible = "i2c-gpio"; #address-cells = <1>;
configs/socfpga_secu1_defconfig +5 -0
@@ -48,6 +48,9 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_SPL_BLK is not set +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_DM_BOOTCOUNT=y +CONFIG_DM_BOOTCOUNT_RTC=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -76,6 +79,8 @@ CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_DM_RESET=y +CONFIG_DM_RTC=y +CONFIG_RTC_M41T62=y CONFIG_SPI=y CONFIG_SPI_MEM=y CONFIG_DESIGNWARE_SPI=y
Signature · 1 line
2.25.0
Tan
PATCH 1/1 ARM: socfpga: Enable DM RTC bootcount on ABB SECU1
Quoted 11 lines
-----Original Message-----
From: Marek Vasut <[email protected]>
Sent: Saturday, March 7, 2020 4:52 AM
To: u-boot at lists.denx.de
Cc: Marek Vasut <[email protected]>; Tan, Ley Foon <[email protected]>; Simon Goldschmidt <[email protected]>
Subject: [PATCH] ARM: socfpga: Enable DM RTC bootcount on ABB SECU1
Quoted 5 lines
Add and enable RTC-backed boot counter on ABB SECU1 platform.
Signed-off-by Marek Vasut <[email protected]>Cc Ley Foon Tan <[email protected]>Cc Simon Goldschmidt <[email protected]>
Reviewed-by Ley Foon Tan <[email protected]>
Regards
Ley Foon