Skip to contentSkip to conversation

Support the Allwinner F1C100s USB stack

PATCH RESEND Superseded George Hilliard 2 participants 13 messages Mar 9, 2020 – Mar 13, 2020

Subsystems (5)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Support the Allwinner F1C100s USB stack

The Allwinner F1C100s has an MUSB-based USB peripheral. This patch series implements support for it alongside existing Allwinner support code.

This series was originally written by Icenowy Zheng for Linux v4.14. I've rebased and bugfixed that work against mainline and tested it on both the Lichee Nano and my custom hardware.

This resubmit is unchanged from the series I sent a couple weeks ago, although I've expanded the Cc: to the linux-usb list.

George Hilliard (3):
dt-bindings: Add new F1C100s compatible strings for USB
phy: sun4i-usb: add support for the USB PHY on suniv SoC
musb: sunxi: add support for the suniv MUSB controller

Icenowy Zheng (2):
ARM: suniv: add USB-related device nodes
ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

 .../phy/allwinner,sun4i-a10-usb-phy.yaml      |  1 +
 .../usb/allwinner,sun4i-a10-musb.yaml         |  1 +
 .../boot/dts/suniv-f1c100s-licheepi-nano.dts  | 16 ++++++++++
 arch/arm/boot/dts/suniv-f1c100s.dtsi          | 29 +++++++++++++++++++
 drivers/phy/allwinner/phy-sun4i-usb.c         | 11 +++++++
 drivers/usb/musb/sunxi.c                      |  8 +++--
 6 files changed, 64 insertions(+), 2 deletions(-)
Signature · 1 line
2.25.0
#1 lore raw

PATCH RESEND 1/5 dt-bindings: Add new F1C100s compatible strings for USB

This chip contains variants of the already-supported peripherals present on other Allwinner parts. Add a new compatible line for them.

---
 .../devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml     | 1 +
 .../devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml        | 1 +
 2 files changed, 2 insertions(+)
Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml +1 -0
index 020ef9e4c411..1762a302c594 100644
@@ -18,6 +18,7 @@ properties:
     enum:
       - allwinner,sun4i-a10-usb-phy
       - allwinner,sun7i-a20-usb-phy
+      - allwinner,suniv-f1c100s-usb-phy
 
   reg:
     items:
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +1 -0
index d9207bf9d894..d2eea0003b99 100644
@@ -17,6 +17,7 @@ properties:
       - const: allwinner,sun6i-a31-musb
       - const: allwinner,sun8i-a33-musb
       - const: allwinner,sun8i-h3-musb
+      - const: allwinner,suniv-f1c100s-musb
       - items:
           - enum:
               - allwinner,sun8i-a83t-musb
Signature · 1 line
2.25.0
Acked-by on v1 1/5
#2 lore raw

Re: [RESEND PATCH 1/5] dt-bindings: Add new F1C100s compatible strings for USB

Quoted 5 lines · George Hilliard

This chip contains variants of the already-supported peripherals present on other Allwinner parts. Add a new compatible line for them.

Quoted 32 lines
---
 .../devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml     | 1 +
 .../devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml        | 1 +
 2 files changed, 2 insertions(+)
Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml +1 -0
index 020ef9e4c411..1762a302c594 100644
@@ -18,6 +18,7 @@ properties:
     enum:
       - allwinner,sun4i-a10-usb-phy
       - allwinner,sun7i-a20-usb-phy
+      - allwinner,suniv-f1c100s-usb-phy
 
   reg:
     items:
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +1 -1
index d9207bf9d894..d2eea0003b99 100644
@@ -17,6 +17,7 @@ properties:
       - const: allwinner,sun6i-a31-musb
       - const: allwinner,sun8i-a33-musb
       - const: allwinner,sun8i-h3-musb
+      - const: allwinner,suniv-f1c100s-musb
       - items:
           - enum:
               - allwinner,sun8i-a83t-musb
--

2.25.0

#3 lore raw

PATCH RESEND 2/5 phy: sun4i-usb: add support for the USB PHY on suniv SoC

In reply to George Hilliard

The suniv SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

---
 drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/phy/allwinner/phy-sun4i-usb.c +11 -0
index 856927382248..5fb0c42fe8fd 100644
@@ -98,6 +98,7 @@
 #define POLL_TIME			msecs_to_jiffies(250)
 
 enum sun4i_usb_phy_type {
+	suniv_f1c100s_phy,
 	sun4i_a10_phy,
 	sun6i_a31_phy,
 	sun8i_a33_phy,
@@ -859,6 +860,14 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
+	.num_phys = 1,
+	.type = suniv_f1c100s_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A10,
+	.dedicated_clocks = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 	.num_phys = 3,
 	.type = sun4i_a10_phy,
@@ -973,6 +982,8 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 };
 
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
+	{ .compatible = "allwinner,suniv-f1c100s-usb-phy",
+	  .data = &suniv_f1c100s_cfg },
 	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
 	{ .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
Signature · 1 line
2.25.0
#4 lore raw

Re: [RESEND PATCH 2/5] phy: sun4i-usb: add support for the USB PHY on suniv SoC

Quoted 6 lines · George Hilliard

The suniv SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Not sure why Icenowy's SoB is here. If she was the original author, you are supposed to keep her name as the author.

Quoted 33 lines
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/phy/allwinner/phy-sun4i-usb.c +9 -0
index 856927382248..5fb0c42fe8fd 100644
@@ -98,6 +98,7 @@
 #define POLL_TIME                      msecs_to_jiffies(250)
 
 enum sun4i_usb_phy_type {
+       suniv_f1c100s_phy,
        sun4i_a10_phy,
        sun6i_a31_phy,
        sun8i_a33_phy,
@@ -859,6 +860,14 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
        return 0;
 }
 
+static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
+       .num_phys = 1,
+       .type = suniv_f1c100s_phy,
+       .disc_thresh = 3,
+       .phyctl_offset = REG_PHYCTL_A10,
+       .dedicated_clocks = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
        .num_phys = 3,
        .type = sun4i_a10_phy,

drivers/phy/allwinner/phy-sun4i-usb.c static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { · line 987

Quoted 6 lines
drivers/phy/allwinner/phy-sun4i-usb.c +2 -0
@@ -973,6 +982,8 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 };
 
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
+       { .compatible = "allwinner,suniv-f1c100s-usb-phy",
+         .data = &suniv_f1c100s_cfg },
        { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },

Please use the same style (and ignore checkpatch.pl on this one).

ChenYu

Quoted 5 lines
drivers/phy/allwinner/phy-sun4i-usb.c +0 -1
        { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
        { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
--

2.25.0

#5 lore raw

Re: [RESEND PATCH 2/5] phy: sun4i-usb: add support for the USB PHY on suniv SoC

Quoted 48 lines · Chen-Yu Tsai
Quoted 6 lines · George Hilliard

The suniv SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Not sure why Icenowy's SoB is here. If she was the original author, you are supposed to keep her name as the author.

Quoted 35 lines
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/phy/allwinner/phy-sun4i-usb.c +9 -0
index 856927382248..5fb0c42fe8fd 100644
@@ -98,6 +98,7 @@
 #define POLL_TIME                      msecs_to_jiffies(250)
 
 enum sun4i_usb_phy_type {
+       suniv_f1c100s_phy,
        sun4i_a10_phy,
        sun6i_a31_phy,
        sun8i_a33_phy,
@@ -859,6 +860,14 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
        return 0;
 }
 
+static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
+       .num_phys = 1,
+       .type = suniv_f1c100s_phy,
+       .disc_thresh = 3,
+       .phyctl_offset = REG_PHYCTL_A10,
+       .dedicated_clocks = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
        .num_phys = 3,
        .type = sun4i_a10_phy,
@@ -973,6 +982,8 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 };
 
Quoted 11 lines

drivers/phy/allwinner/phy-sun4i-usb.c static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { · line 987

Quoted 4 lines
drivers/phy/allwinner/phy-sun4i-usb.c +2 -0
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
+       { .compatible = "allwinner,suniv-f1c100s-usb-phy",
+         .data = &suniv_f1c100s_cfg },
        { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },

Please use the same style (and ignore checkpatch.pl on this one).

ChenYu

Quoted 2 lines
drivers/phy/allwinner/phy-sun4i-usb.c +0 -0
        { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
        { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },

Also, please stick to the same ordering in the driver and the bindings.

FWIW, sort places "suniv" after all sun([4-9]|50)i variants.

ChenYu

Quoted 3 lines
Quoted 3 lines

--
2.25.0

#6 lore raw

Re: [RESEND PATCH 2/5] phy: sun4i-usb: add support for the USB PHY on suniv SoC

In reply to Chen-Yu Tsai

Thanks for the review.

Quoted 4 lines · Chen-Yu Tsai
Quoted 1 line · George Hilliard
Quoted 8 lines
Quoted 5 lines

The suniv SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Not sure why Icenowy's SoB is here. If she was the original author, you are supposed to keep her name as the author.

So, I was unclear on the convention here. This patch is based on her patch, but I've modified it and rebased those modifications back into a single change. I'm happy to change the author field - does it need a "Co-authored-by: myself" here?

Quoted 7 lines

drivers/phy/allwinner/phy-sun4i-usb.c static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { · line 987

Quoted 5 lines

static const struct of_device_id sun4i_usb_phy_of_match[] = {

drivers/phy/allwinner/phy-sun4i-usb.c +2 -0
+       { .compatible = "allwinner,suniv-f1c100s-usb-phy",
+         .data = &suniv_f1c100s_cfg },
        { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },

Please use the same style (and ignore checkpatch.pl on this one).

Very happy to change this, it was bugging me!

George

#7 lore raw

Re: [RESEND PATCH 2/5] phy: sun4i-usb: add support for the USB PHY on suniv SoC

Quoted 14 lines · George Hilliard

Thanks for the review.

Quoted 10 lines · Chen-Yu Tsai
Quoted 6 lines · George Hilliard

The suniv SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Quoted 7 lines
Quoted 2 lines

Not sure why Icenowy's SoB is here. If she was the original author, you are supposed to keep her name as the author.

So, I was unclear on the convention here. This patch is based on her patch, but I've modified it and rebased those modifications back into a single change. I'm happy to change the author field - does it need a "Co-authored-by: myself" here?

I suppose that really depends on how much you changed it. If it were just stylistic changes I'd keep the original author. Also you should list any changes you made to the patch by inserting

[<who>: changed foo and bar]

before your SoB.

As for the Co-authored-by, I haven't really seen it used so I don't really know.

ChenYu

Quoted 11 lines
Quoted 7 lines

drivers/phy/allwinner/phy-sun4i-usb.c static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { · line 987

Quoted 5 lines

static const struct of_device_id sun4i_usb_phy_of_match[] = {

drivers/phy/allwinner/phy-sun4i-usb.c +2 -0
+       { .compatible = "allwinner,suniv-f1c100s-usb-phy",
+         .data = &suniv_f1c100s_cfg },
        { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },

Please use the same style (and ignore checkpatch.pl on this one).

Very happy to change this, it was bugging me!

George

#8 lore raw

Re: [RESEND PATCH 2/5] phy: sun4i-usb: add support for the USB PHY on suniv SoC

Quoted 25 lines · Chen-Yu Tsai
Quoted 14 lines · George Hilliard

Thanks for the review.

Quoted 10 lines · Chen-Yu Tsai
Quoted 6 lines · George Hilliard

The suniv SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Quoted 7 lines
Quoted 2 lines

Not sure why Icenowy's SoB is here. If she was the original author, you are supposed to keep her name as the author.

So, I was unclear on the convention here. This patch is based on her patch, but I've modified it and rebased those modifications back into a single change. I'm happy to change the author field - does it need a "Co-authored-by: myself" here?

Quoted 7 lines

I suppose that really depends on how much you changed it. If it were just stylistic changes I'd keep the original author. Also you should list any changes you made to the patch by inserting

[<who>: changed foo and bar]

before your SoB.

Ok, this makes sense. Thanks. I'll send another series. The few that are stylistic, I believe I retained Icenowy as the author. Where I modified them, I put myself (so people email me, not her, with problems). I'll modify the commit messages like you describe and double check the authorship.

Quoted 2 lines

As for the Co-authored-by, I haven't really seen it used so I don't really know.

Off topic, but I wish Git supported multiple authors natively.

George

#9 lore raw

PATCH RESEND 3/5 musb: sunxi: add support for the suniv MUSB controller

In reply to George Hilliard

The suniv SoC has a MUSB controller like the one in A33, but with a SRAM region to be claimed.

Add support for it.

---
 drivers/usb/musb/sunxi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/usb/musb/sunxi.c +6 -2
index f3f76f2ac63f..76806b781844 100644
@@ -714,14 +714,17 @@ static int sunxi_musb_probe(struct platform_device *pdev)
 	INIT_WORK(&glue->work, sunxi_musb_work);
 	glue->host_nb.notifier_call = sunxi_musb_host_notifier;
 
-	if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb"))
+	if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb") ||
+	    of_device_is_compatible(np, "allwinner,suniv-f1c100s-musb")) {
 		set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags);
+	}
 
 	if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb"))
 		set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
 
 	if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") ||
-	    of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) {
+	    of_device_is_compatible(np, "allwinner,sun8i-h3-musb") ||
+	    of_device_is_compatible(np, "allwinner,suniv-f1c100s-musb")) {
 		set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
 		set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags);
 	}
@@ -814,6 +817,7 @@ static int sunxi_musb_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id sunxi_musb_match[] = {
+	{ .compatible = "allwinner,suniv-f1c100s-musb", },
 	{ .compatible = "allwinner,sun4i-a10-musb", },
 	{ .compatible = "allwinner,sun6i-a31-musb", },
 	{ .compatible = "allwinner,sun8i-a33-musb", },
Signature · 1 line
2.25.0
Acked-by on v1 3/5
#10 lore raw

Re: [RESEND PATCH 3/5] musb: sunxi: add support for the suniv MUSB controller

Quoted 7 lines · George Hilliard

The suniv SoC has a MUSB controller like the one in A33, but with a SRAM region to be claimed.

Add support for it.

Same thing about the SoB and author.

Quoted 30 lines
---
 drivers/usb/musb/sunxi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/usb/musb/sunxi.c +5 -2
index f3f76f2ac63f..76806b781844 100644
@@ -714,14 +714,17 @@ static int sunxi_musb_probe(struct platform_device *pdev)
        INIT_WORK(&glue->work, sunxi_musb_work);
        glue->host_nb.notifier_call = sunxi_musb_host_notifier;
 
-       if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb"))
+       if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb") ||
+           of_device_is_compatible(np, "allwinner,suniv-f1c100s-musb")) {
                set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags);
+       }
 
        if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb"))
                set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
 
        if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") ||
-           of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) {
+           of_device_is_compatible(np, "allwinner,sun8i-h3-musb") ||
+           of_device_is_compatible(np, "allwinner,suniv-f1c100s-musb")) {
                set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
                set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags);
        }

drivers/usb/musb/sunxi.c static int sunxi_musb_remove(struct platform_device *pdev) · line 820

Quoted 4 lines
drivers/usb/musb/sunxi.c +1 -0
@@ -814,6 +817,7 @@ static int sunxi_musb_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id sunxi_musb_match[] = {
+       { .compatible = "allwinner,suniv-f1c100s-musb", },

And same thing about the ordering.

Once resolved,

Quoted 6 lines
drivers/usb/musb/sunxi.c +0 -1
        { .compatible = "allwinner,sun4i-a10-musb", },
        { .compatible = "allwinner,sun6i-a31-musb", },
        { .compatible = "allwinner,sun8i-a33-musb", },
--

2.25.0

#11 lore raw

PATCH RESEND 4/5 ARM: suniv: add USB-related device nodes

In reply to George Hilliard

From: Icenowy Zheng <[email protected]>

The suniv SoC has a USB OTG controller and a USB PHY like other Allwinner SoCs.

Add their device tree node.

---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
arch/arm/boot/dts/suniv-f1c100s.dtsi +29 -0
index 6100d3b75f61..ec9f248ba889 100644
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <[email protected]>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -140,5 +143,31 @@ uart2: serial@1c25800 {
 			resets = <&ccu 26>;
 			status = "disabled";
 		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
 	};
 };
Signature · 1 line
2.25.0
#12 lore raw

PATCH RESEND 5/5 ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

In reply to George Hilliard

From: Icenowy Zheng <[email protected]>

Lichee Pi Nano has a Micro-USB connector, with its D+, D- pins connected to the USB pins of the SoC and ID pin connected to PE2 GPIO.

Enable the USB functionality.

This patch depends on the previous change to the F1C100s device tree.

---
 .../arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +16 -0
index a1154e6c7cb5..c42186e22d45 100644
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "suniv-f1c100s.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Lichee Pi Nano";
 	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
@@ -19,8 +21,22 @@ chosen {
 	};
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pe_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpio = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
Signature · 1 line
2.25.0