Skip to contentSkip to conversation

tc: m_action: introduce support for hw stats type

PATCH Superseded Jiri Pirko 1 participant 1 message Mar 11, 2020

Subsystems (3)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Jiri Pirko

author maintainer
#0 lore raw

PATCH v3 1/1 tc: m_action: introduce support for hw stats type

From: Jiri Pirko <[email protected]>

Introduce support for per-action hw stats type config.

This patch allows user to specify one of the following types of HW stats for added action:
immediate - queried during dump time
delayed - polled from HW periodically or sent by HW in async manner disabled - no stats needed

Note that if "hw_stats" option is not passed, user does not care about the type, just expects any type of stats.

Examples:

$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
  eth_type ipv4
  dst_ip 192.168.1.1
  skip_sw
  in_hw in_hw_count 2
        action order 1: gact action drop
         random type none pass val 0
         index 1 ref 1 bind 1 installed 7 sec used 2 sec
        Action statistics:
        Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        hw_stats disabled
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
  eth_type ipv4
  dst_ip 192.168.1.1
  skip_sw
  in_hw in_hw_count 2
        action order 1: gact action drop
         random type none pass val 0
         index 1 ref 1 bind 1 installed 11 sec used 4 sec
        Action statistics:
        Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0)
        Sent software 0 bytes 0 pkt
        Sent hardware 102 bytes 1 pkt
        backlog 0b 0p requeues 0
        hw_stats immediate

---
v2->v3:
- adjusted hw_stats_type_bf struct initialization
- added comment to "disable"
v1->v2:
- added more description and examples

---
 include/uapi/linux/pkt_cls.h | 22 +++++++++++++
 man/man8/tc-actions.8        | 31 ++++++++++++++++++
 tc/m_action.c                | 63 ++++++++++++++++++++++++++++++++++++
 3 files changed, 116 insertions(+)
include/uapi/linux/pkt_cls.h +22 -0
index 449a63971451..81cc1a869588 100644
@@ -17,6 +17,7 @@ enum {
 	TCA_ACT_PAD,
 	TCA_ACT_COOKIE,
 	TCA_ACT_FLAGS,
+	TCA_ACT_HW_STATS_TYPE,
 	__TCA_ACT_MAX
 };
 
@@ -24,6 +25,27 @@ enum {
 					 * actions stats.
 					 */
 
+/* tca HW stats type
+ * When user does not pass the attribute, he does not care.
+ * It is the same as if he would pass the attribute with
+ * all supported bits set.
+ * In case no bits are set, user is not interested in getting any HW statistics.
+ */
+#define TCA_ACT_HW_STATS_TYPE_IMMEDIATE (1 << 0) /* Means that in dump, user
+						  * gets the current HW stats
+						  * state from the device
+						  * queried at the dump time.
+						  */
+#define TCA_ACT_HW_STATS_TYPE_DELAYED (1 << 1) /* Means that in dump, user gets
+						* HW stats that might be out
+						* of date for some time, maybe
+						* couple of seconds. This is
+						* the case when driver polls
+						* stats updates periodically
+						* or when it gets async stats update
+						* from the device.
+						*/
+
 #define TCA_ACT_MAX __TCA_ACT_MAX
 #define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
 #define TCA_ACT_MAX_PRIO 32
man/man8/tc-actions.8 +31 -0
index bee59f7247fa..7d7df00013c6 100644
@@ -49,6 +49,8 @@ actions \- independently defined actions in tc
 ] [
 .I FLAGS
 ] [
+.I HWSTATSSPEC
+] [
 .I CONTROL
 ]
 
@@ -77,6 +79,12 @@ ACTNAME
 :=
 .I no_percpu
 
+.I HWSTATSSPEC
+:=
+.BR hw_stats " {"
+.IR immediate " | " delayed " | " disabled
+.R }
+
 .I ACTDETAIL
 :=
 .I ACTNAME ACTPARAMS
@@ -200,6 +208,29 @@ which indicates that action is expected to have minimal software data-path
 traffic and doesn't need to allocate stat counters with percpu allocator.
 This option is intended to be used by hardware-offloaded actions.
 
+.TP
+.BI hw_stats " HW_STATS"
+Speficies the type of HW stats of new action. If omitted, any stats counter type
+is going to be used, according to driver and its resources.
+The
+.I HW_STATS
+indicates the type. Any of the following are valid:
+.RS
+.TP
+.B immediate
+Means that in dump, user gets the current HW stats state from the device
+queried at the dump time.
+.TP
+.B delayed
+Means that in dump, user gets HW stats that might be out of date for
+some time, maybe couple of seconds. This is the case when driver polls
+stats updates periodically or when it gets async stats update
+from the device.
+.TP
+.B disabled
+No HW stats are going to be available in dump.
+.RE
+
 .TP
 .BI since " MSTIME"
 When dumping large number of actions, a millisecond time-filter can be
tc/m_action.c +63 -0

81 lines not on this page · raw message

Signature · 1 line
2.21.1