Skip to contentSkip to conversation

xen/rcu: let rcu work better with core scheduling

PATCH Superseded Juergen Gross 3 participants 17 messages Mar 13, 2020 – Mar 19, 2020

v6 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v6 cover xen/rcu: let rcu work better with core scheduling

Today the RCU handling in Xen is affecting scheduling in several ways. It is raising sched softirqs without any real need and it requires tasklets for rcu_barrier(), which interacts badly with core scheduling.

This small series repairs those issues.

Additionally some ASSERT()s are added for verification of sane rcu handling. In order to avoid those triggering right away the obvious violations are fixed. This includes making rcu locking functions type safe.

Changes in V6:
- added memory barrier in patch 1
- drop cpu_map_lock only at the end of rcu_barrier()
- re-add prempt_disable() in patch 3

Changes in V5:
- dropped already committed patches 1 and 4
- fixed race
- rework blocking of rcu processing with held rcu locks

Changes in V4:
- patch 5: use barrier()

Changes in V3:
- type safe locking functions (functions instead of macros)
- per-lock debug additions
- new patches 4 and 6
- fixed races

Changes in V2:
- use get_cpu_maps() in rcu_barrier() handling
- avoid recursion in rcu_barrier() handling
- new patches 3 and 4

Juergen Gross (4):
xen/rcu: don't use stop_machine_run() for rcu_barrier()
xen: don't process rcu callbacks when holding a rcu_read_lock() xen/rcu: add assertions to debug build
xen/rcu: add per-lock counter in debug builds

 xen/common/rcupdate.c      | 97 +++++++++++++++++++++++++++++++++-------------
 xen/common/softirq.c       | 14 ++++++-
 xen/include/xen/rcupdate.h | 76 +++++++++++++++++++++++++++++-------
 3 files changed, 145 insertions(+), 42 deletions(-)
Signature · 7 lines
2.16.4


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#1 lore raw

PATCH v6 1/4 xen/rcu: don't use stop_machine_run() for rcu_barrier()

Today rcu_barrier() is calling stop_machine_run() to synchronize all physical cpus in order to ensure all pending rcu calls have finished when returning.

As stop_machine_run() is using tasklets this requires scheduling of idle vcpus on all cpus imposing the need to call rcu_barrier() on idle cpus only in case of core scheduling being active, as otherwise a scheduling deadlock would occur.

There is no need at all to do the syncing of the cpus in tasklets, as rcu activity is started in __do_softirq() called whenever softirq activity is allowed. So rcu_barrier() can easily be modified to use softirq for synchronization of the cpus no longer requiring any scheduling activity.

As there already is a rcu softirq reuse that for the synchronization.

Remove the barrier element from struct rcu_data as it isn't used.

Finally switch rcu_barrier() to return void as it now can never fail.

---
V2:
- add recursion detection

V3:
- fix races (Igor Druzhinin)

V5:
- rename done_count to pending_count (Jan Beulich)
- fix race (Jan Beulich)

V6:
- add barrier (Julien Grall)
- add ASSERT() (Julien Grall)
- hold cpu_map lock until end of rcu_barrier() (Julien Grall)

---
 xen/common/rcupdate.c      | 95 +++++++++++++++++++++++++++++++++-------------
 xen/include/xen/rcupdate.h |  2 +-
 2 files changed, 69 insertions(+), 28 deletions(-)
xen/common/rcupdate.c +68 -27
index 03d84764d2..ed9083d2b2 100644
@@ -83,7 +83,6 @@ struct rcu_data {
     struct rcu_head **donetail;
     long            blimit;           /* Upper limit on a processed batch */
     int cpu;
-    struct rcu_head barrier;
     long            last_rs_qlen;     /* qlen during the last resched */
 
     /* 3) idle CPUs handling */
@@ -91,6 +90,7 @@ struct rcu_data {
     bool idle_timer_active;
 
     bool            process_callbacks;
+    bool            barrier_active;
 };
 
 /*
@@ -143,51 +143,85 @@ static int qhimark = 10000;
 static int qlowmark = 100;
 static int rsinterval = 1000;
 
-struct rcu_barrier_data {
-    struct rcu_head head;
-    atomic_t *cpu_count;
-};
+/*
+ * rcu_barrier() handling:
+ * cpu_count holds the number of cpus required to finish barrier handling.
+ * pending_count is initialized to nr_cpus + 1.
+ * Cpus are synchronized via softirq mechanism. rcu_barrier() is regarded to
+ * be active if pending_count is not zero. In case rcu_barrier() is called on
+ * multiple cpus it is enough to check for pending_count being not zero on entry
+ * and to call process_pending_softirqs() in a loop until pending_count drops to
+ * zero, before starting the new rcu_barrier() processing.
+ * In order to avoid hangs when rcu_barrier() is called multiple times on the
+ * same cpu in fast sequence and a slave cpu couldn't drop out of the
+ * barrier handling fast enough a second counter pending_count is needed.
+ * The rcu_barrier() invoking cpu will wait until pending_count reaches 1
+ * (meaning that all cpus have finished processing the barrier) and then will
+ * reset pending_count to 0 to enable entering rcu_barrier() again.
+ */
+static atomic_t cpu_count = ATOMIC_INIT(0);
+static atomic_t pending_count = ATOMIC_INIT(0);
 
 static void rcu_barrier_callback(struct rcu_head *head)
 {
-    struct rcu_barrier_data *data = container_of(
-        head, struct rcu_barrier_data, head);
-    atomic_inc(data->cpu_count);
+    smp_wmb();     /* Make all previous writes visible to other cpus. */
+    atomic_dec(&cpu_count);
 }
 
-static int rcu_barrier_action(void *_cpu_count)
+static void rcu_barrier_action(void)
 {
-    struct rcu_barrier_data data = { .cpu_count = _cpu_count };
-
-    ASSERT(!local_irq_is_enabled());
-    local_irq_enable();
+    struct rcu_head head;
 
     /*
      * When callback is executed, all previously-queued RCU work on this CPU
-     * is completed. When all CPUs have executed their callback, data.cpu_count
-     * will have been incremented to include every online CPU.
+     * is completed. When all CPUs have executed their callback, cpu_count
+     * will have been decremented to 0.
      */
-    call_rcu(&data.head, rcu_barrier_callback);
+    call_rcu(&head, rcu_barrier_callback);
 
-    while ( atomic_read(data.cpu_count) != num_online_cpus() )
+    while ( atomic_read(&cpu_count) )
     {
         process_pending_softirqs();
         cpu_relax();
     }
 
-    local_irq_disable();
-
-    return 0;
+    atomic_dec(&pending_count);
 }
 
-/*
- * As rcu_barrier() is using stop_machine_run() it is allowed to be used in
- * idle context only (see comment for stop_machine_run()).
- */
-int rcu_barrier(void)
+void rcu_barrier(void)
 {
-    atomic_t cpu_count = ATOMIC_INIT(0);
-    return stop_machine_run(rcu_barrier_action, &cpu_count, NR_CPUS);
+    unsigned int n_cpus;
+
+    ASSERT(!in_irq() && local_irq_is_enabled());
+
+    for ( ;; )
+    {
+        if ( !atomic_read(&pending_count) && get_cpu_maps() )
+        {
+            n_cpus = num_online_cpus();
+
+            if ( atomic_cmpxchg(&pending_count, 0, n_cpus + 1) == 0 )
+                break;
+
+            put_cpu_maps();
+        }
+
+        process_pending_softirqs();
+        cpu_relax();
+    }
+
+    atomic_set(&cpu_count, n_cpus);
+    cpumask_raise_softirq(&cpu_online_map, RCU_SOFTIRQ);
+
+    while ( atomic_read(&pending_count) != 1 )
+    {
+        process_pending_softirqs();
+        cpu_relax();
+    }
+
+    atomic_set(&pending_count, 0);
+
+    put_cpu_maps();
 }
 
 /* Is batch a before batch b ? */
@@ -426,6 +460,13 @@ static void rcu_process_callbacks(void)
         rdp->process_callbacks = false;
         __rcu_process_callbacks(&rcu_ctrlblk, rdp);
     }
+
+    if ( atomic_read(&cpu_count) && !rdp->barrier_active )
+    {
+        rdp->barrier_active = true;
+        rcu_barrier_action();
+        rdp->barrier_active = false;
+    }
 }
 
 static int __rcu_pending(struct rcu_ctrlblk *rcp, struct rcu_data *rdp)
xen/include/xen/rcupdate.h +1 -1
index eb9b60df07..31c8b86d13 100644
@@ -144,7 +144,7 @@ void rcu_check_callbacks(int cpu);
 void call_rcu(struct rcu_head *head, 
               void (*func)(struct rcu_head *head));
 
-int rcu_barrier(void);
+void rcu_barrier(void);
 
 void rcu_idle_enter(unsigned int cpu);
 void rcu_idle_exit(unsigned int cpu);
Signature · 7 lines
2.16.4


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#2 lore raw

Re: [Xen-devel] [PATCH v6 1/4] xen/rcu: don't use stop_machine_run() for rcu_barrier()

Quoted 138 lines · Juergen Gross

Today rcu_barrier() is calling stop_machine_run() to synchronize all physical cpus in order to ensure all pending rcu calls have finished when returning.

As stop_machine_run() is using tasklets this requires scheduling of idle vcpus on all cpus imposing the need to call rcu_barrier() on idle cpus only in case of core scheduling being active, as otherwise a scheduling deadlock would occur.

There is no need at all to do the syncing of the cpus in tasklets, as rcu activity is started in __do_softirq() called whenever softirq activity is allowed. So rcu_barrier() can easily be modified to use softirq for synchronization of the cpus no longer requiring any scheduling activity.

As there already is a rcu softirq reuse that for the synchronization.

Remove the barrier element from struct rcu_data as it isn't used.

Finally switch rcu_barrier() to return void as it now can never fail.

---
V2:
- add recursion detection

V3:
- fix races (Igor Druzhinin)

V5:
- rename done_count to pending_count (Jan Beulich)
- fix race (Jan Beulich)

V6:
- add barrier (Julien Grall)
- add ASSERT() (Julien Grall)
- hold cpu_map lock until end of rcu_barrier() (Julien Grall)

---
  xen/common/rcupdate.c      | 95 +++++++++++++++++++++++++++++++++-------------
  xen/include/xen/rcupdate.h |  2 +-
  2 files changed, 69 insertions(+), 28 deletions(-)
xen/common/rcupdate.c +29 -25
index 03d84764d2..ed9083d2b2 100644
@@ -83,7 +83,6 @@ struct rcu_data {
      struct rcu_head **donetail;
      long            blimit;           /* Upper limit on a processed batch */
      int cpu;
-    struct rcu_head barrier;
      long            last_rs_qlen;     /* qlen during the last resched */
 
      /* 3) idle CPUs handling */
@@ -91,6 +90,7 @@ struct rcu_data {
      bool idle_timer_active;
 
      bool            process_callbacks;
+    bool            barrier_active;
  };
 
  /*
@@ -143,51 +143,85 @@ static int qhimark = 10000;
  static int qlowmark = 100;
  static int rsinterval = 1000;
 
-struct rcu_barrier_data {
-    struct rcu_head head;
-    atomic_t *cpu_count;
-};
+/*
+ * rcu_barrier() handling:
+ * cpu_count holds the number of cpus required to finish barrier handling.
+ * pending_count is initialized to nr_cpus + 1.
+ * Cpus are synchronized via softirq mechanism. rcu_barrier() is regarded to
+ * be active if pending_count is not zero. In case rcu_barrier() is called on
+ * multiple cpus it is enough to check for pending_count being not zero on entry
+ * and to call process_pending_softirqs() in a loop until pending_count drops to
+ * zero, before starting the new rcu_barrier() processing.
+ * In order to avoid hangs when rcu_barrier() is called multiple times on the
+ * same cpu in fast sequence and a slave cpu couldn't drop out of the
+ * barrier handling fast enough a second counter pending_count is needed.
+ * The rcu_barrier() invoking cpu will wait until pending_count reaches 1
+ * (meaning that all cpus have finished processing the barrier) and then will
+ * reset pending_count to 0 to enable entering rcu_barrier() again.
+ */
+static atomic_t cpu_count = ATOMIC_INIT(0);
+static atomic_t pending_count = ATOMIC_INIT(0);
 
  static void rcu_barrier_callback(struct rcu_head *head)
  {
-    struct rcu_barrier_data *data = container_of(
-        head, struct rcu_barrier_data, head);
-    atomic_inc(data->cpu_count);
+    smp_wmb();     /* Make all previous writes visible to other cpus. */
+    atomic_dec(&cpu_count);
  }
 
-static int rcu_barrier_action(void *_cpu_count)
+static void rcu_barrier_action(void)
  {
-    struct rcu_barrier_data data = { .cpu_count = _cpu_count };
-
-    ASSERT(!local_irq_is_enabled());
-    local_irq_enable();
+    struct rcu_head head;
 
      /*
       * When callback is executed, all previously-queued RCU work on this CPU
-     * is completed. When all CPUs have executed their callback, data.cpu_count
-     * will have been incremented to include every online CPU.
+     * is completed. When all CPUs have executed their callback, cpu_count
+     * will have been decremented to 0.
       */
-    call_rcu(&data.head, rcu_barrier_callback);
+    call_rcu(&head, rcu_barrier_callback);
 
-    while ( atomic_read(data.cpu_count) != num_online_cpus() )
+    while ( atomic_read(&cpu_count) )
      {
          process_pending_softirqs();
          cpu_relax();
      }
 
-    local_irq_disable();
-
-    return 0;
+    atomic_dec(&pending_count);
  }
 
-/*
- * As rcu_barrier() is using stop_machine_run() it is allowed to be used in
- * idle context only (see comment for stop_machine_run()).
- */
-int rcu_barrier(void)
+void rcu_barrier(void)
  {

xen/common/rcupdate.c static int qhimark = 10000; · line 200

Quoted 10 lines
xen/common/rcupdate.c +8 -2
-    atomic_t cpu_count = ATOMIC_INIT(0);
-    return stop_machine_run(rcu_barrier_action, &cpu_count, NR_CPUS);
+    unsigned int n_cpus;
+
+    ASSERT(!in_irq() && local_irq_is_enabled());
+
+    for ( ;; )
+    {
+        if ( !atomic_read(&pending_count) && get_cpu_maps() )
+        {

If the whole action is happening while cpu_maps are taken why do you need to check pending_count first? I think the logic of this loop could be simplified if taken this into account.

Igor

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#3 lore raw

Re: [Xen-devel] [PATCH v6 1/4] xen/rcu: don't use stop_machine_run() for rcu_barrier()

Quoted 145 lines · Igor Druzhinin
Quoted 144 lines · Juergen Gross

Today rcu_barrier() is calling stop_machine_run() to synchronize all physical cpus in order to ensure all pending rcu calls have finished when returning.

As stop_machine_run() is using tasklets this requires scheduling of idle vcpus on all cpus imposing the need to call rcu_barrier() on idle cpus only in case of core scheduling being active, as otherwise a scheduling deadlock would occur.

There is no need at all to do the syncing of the cpus in tasklets, as rcu activity is started in __do_softirq() called whenever softirq activity is allowed. So rcu_barrier() can easily be modified to use softirq for synchronization of the cpus no longer requiring any scheduling activity.

As there already is a rcu softirq reuse that for the synchronization.

Remove the barrier element from struct rcu_data as it isn't used.

Finally switch rcu_barrier() to return void as it now can never fail.

---
V2:
- add recursion detection

V3:
- fix races (Igor Druzhinin)

V5:
- rename done_count to pending_count (Jan Beulich)
- fix race (Jan Beulich)

V6:
- add barrier (Julien Grall)
- add ASSERT() (Julien Grall)
- hold cpu_map lock until end of rcu_barrier() (Julien Grall)

---
   xen/common/rcupdate.c      | 95 +++++++++++++++++++++++++++++++++-------------
   xen/include/xen/rcupdate.h |  2 +-
   2 files changed, 69 insertions(+), 28 deletions(-)
xen/common/rcupdate.c +33 -27
index 03d84764d2..ed9083d2b2 100644
@@ -83,7 +83,6 @@ struct rcu_data {
       struct rcu_head **donetail;
       long            blimit;           /* Upper limit on a processed batch */
       int cpu;
-    struct rcu_head barrier;
       long            last_rs_qlen;     /* qlen during the last resched */
 
       /* 3) idle CPUs handling */
@@ -91,6 +90,7 @@ struct rcu_data {
       bool idle_timer_active;
 
       bool            process_callbacks;
+    bool            barrier_active;
   };
 
   /*
@@ -143,51 +143,85 @@ static int qhimark = 10000;
   static int qlowmark = 100;
   static int rsinterval = 1000;
 
-struct rcu_barrier_data {
-    struct rcu_head head;
-    atomic_t *cpu_count;
-};
+/*
+ * rcu_barrier() handling:
+ * cpu_count holds the number of cpus required to finish barrier handling.
+ * pending_count is initialized to nr_cpus + 1.
+ * Cpus are synchronized via softirq mechanism. rcu_barrier() is regarded to
+ * be active if pending_count is not zero. In case rcu_barrier() is called on
+ * multiple cpus it is enough to check for pending_count being not zero on entry
+ * and to call process_pending_softirqs() in a loop until pending_count drops to
+ * zero, before starting the new rcu_barrier() processing.
+ * In order to avoid hangs when rcu_barrier() is called multiple times on the
+ * same cpu in fast sequence and a slave cpu couldn't drop out of the
+ * barrier handling fast enough a second counter pending_count is needed.
+ * The rcu_barrier() invoking cpu will wait until pending_count reaches 1
+ * (meaning that all cpus have finished processing the barrier) and then will
+ * reset pending_count to 0 to enable entering rcu_barrier() again.
+ */
+static atomic_t cpu_count = ATOMIC_INIT(0);
+static atomic_t pending_count = ATOMIC_INIT(0);
 
   static void rcu_barrier_callback(struct rcu_head *head)
   {
-    struct rcu_barrier_data *data = container_of(
-        head, struct rcu_barrier_data, head);
-    atomic_inc(data->cpu_count);
+    smp_wmb();     /* Make all previous writes visible to other cpus. */
+    atomic_dec(&cpu_count);
   }
 
-static int rcu_barrier_action(void *_cpu_count)
+static void rcu_barrier_action(void)
   {
-    struct rcu_barrier_data data = { .cpu_count = _cpu_count };
-
-    ASSERT(!local_irq_is_enabled());
-    local_irq_enable();
+    struct rcu_head head;
 
       /*
        * When callback is executed, all previously-queued RCU work on this CPU
-     * is completed. When all CPUs have executed their callback, data.cpu_count
-     * will have been incremented to include every online CPU.
+     * is completed. When all CPUs have executed their callback, cpu_count
+     * will have been decremented to 0.
        */
-    call_rcu(&data.head, rcu_barrier_callback);
+    call_rcu(&head, rcu_barrier_callback);
 
-    while ( atomic_read(data.cpu_count) != num_online_cpus() )
+    while ( atomic_read(&cpu_count) )
       {
           process_pending_softirqs();
           cpu_relax();
       }
 
-    local_irq_disable();
-
-    return 0;
+    atomic_dec(&pending_count);
   }
 
-/*
- * As rcu_barrier() is using stop_machine_run() it is allowed to be used in
- * idle context only (see comment for stop_machine_run()).
- */
-int rcu_barrier(void)
+void rcu_barrier(void)
   {
-    atomic_t cpu_count = ATOMIC_INIT(0);
-    return stop_machine_run(rcu_barrier_action, &cpu_count, NR_CPUS);
+    unsigned int n_cpus;
+
+    ASSERT(!in_irq() && local_irq_is_enabled());
+
Quoted 8 lines

xen/common/rcupdate.c static int qhimark = 10000; · line 200

Quoted 4 lines
xen/common/rcupdate.c +4 -0
+    for ( ;; )
+    {
+        if ( !atomic_read(&pending_count) && get_cpu_maps() )
+        {

If the whole action is happening while cpu_maps are taken why do you need to check pending_count first? I think the logic of this loop could be simplified if taken this into account.

get_cpu_maps() can be successful on multiple cpus (its a read_lock()). Testing pending_count avoids hammering on the cache lines.

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#4 lore raw

Re: [Xen-devel] [PATCH v6 1/4] xen/rcu: don't use stop_machine_run() for rcu_barrier()

Quoted 162 lines · Jürgen Groß
Quoted 152 lines · Igor Druzhinin
Quoted 151 lines · Juergen Gross

Today rcu_barrier() is calling stop_machine_run() to synchronize all physical cpus in order to ensure all pending rcu calls have finished when returning.

As stop_machine_run() is using tasklets this requires scheduling of idle vcpus on all cpus imposing the need to call rcu_barrier() on idle cpus only in case of core scheduling being active, as otherwise a scheduling deadlock would occur.

There is no need at all to do the syncing of the cpus in tasklets, as rcu activity is started in __do_softirq() called whenever softirq activity is allowed. So rcu_barrier() can easily be modified to use softirq for synchronization of the cpus no longer requiring any scheduling activity.

As there already is a rcu softirq reuse that for the synchronization.

Remove the barrier element from struct rcu_data as it isn't used.

Finally switch rcu_barrier() to return void as it now can never fail.

---
V2:
- add recursion detection

V3:
- fix races (Igor Druzhinin)

V5:
- rename done_count to pending_count (Jan Beulich)
- fix race (Jan Beulich)

V6:
- add barrier (Julien Grall)
- add ASSERT() (Julien Grall)
- hold cpu_map lock until end of rcu_barrier() (Julien Grall)
---
   xen/common/rcupdate.c      | 95
+++++++++++++++++++++++++++++++++-------------
   xen/include/xen/rcupdate.h |  2 +-

   2 files changed, 69 insertions(+), 28 deletions(-)
xen/common/rcupdate.c +0 -0
index 03d84764d2..ed9083d2b2 100644
@@ -83,7 +83,6 @@ struct rcu_data {
        struct rcu_head **donetail;

       long            blimit;           /* Upper limit on a processed batch */
       int cpu;
-    struct rcu_head barrier;
       long            last_rs_qlen;     /* qlen during the last resched */
       /* 3) idle CPUs handling */

xen/common/rcupdate.c +4 -4
@@ -91,6 +90,7 @@ struct rcu_data {
        bool idle_timer_active;
        bool            process_callbacks;
+    bool            barrier_active;
    };
    /*
@@ -143,51 +143,85 @@ static int qhimark = 10000;
    static int qlowmark = 100;
    static int rsinterval = 1000;
-struct rcu_barrier_data {
-    struct rcu_head head;
-    atomic_t *cpu_count;
-};
+/*
+ * rcu_barrier() handling:
+ * cpu_count holds the number of cpus required to finish barrier 

handling.
+ * pending_count is initialized to nr_cpus + 1.
+ * Cpus are synchronized via softirq mechanism. rcu_barrier() is regarded to
+ * be active if pending_count is not zero. In case rcu_barrier() is called on
+ * multiple cpus it is enough to check for pending_count being not zero on entry
+ * and to call process_pending_softirqs() in a loop until pending_count drops to
+ * zero, before starting the new rcu_barrier() processing.
+ * In order to avoid hangs when rcu_barrier() is called multiple times on the
+ * same cpu in fast sequence and a slave cpu couldn't drop out of the
+ * barrier handling fast enough a second counter pending_count is needed.
+ * The rcu_barrier() invoking cpu will wait until pending_count reaches 1
+ * (meaning that all cpus have finished processing the barrier) and then will
+ * reset pending_count to 0 to enable entering rcu_barrier() again.
+ */

xen/common/rcupdate.c +2 -0
+static atomic_t cpu_count = ATOMIC_INIT(0);
+static atomic_t pending_count = ATOMIC_INIT(0);

   static void rcu_barrier_callback(struct rcu_head *head) {
-    struct rcu_barrier_data *data = container_of(
-        head, struct rcu_barrier_data, head);
-    atomic_inc(data->cpu_count);
+    smp_wmb();     /* Make all previous writes visible to other cpus. */
+    atomic_dec(&cpu_count);
   }

xen/common/rcupdate.c +1 -1
-static int rcu_barrier_action(void *_cpu_count)
+static void rcu_barrier_action(void)

   {
-    struct rcu_barrier_data data = { .cpu_count = _cpu_count }; -
-    ASSERT(!local_irq_is_enabled());
-    local_irq_enable();
+    struct rcu_head head;
       /*
        * When callback is executed, all previously-queued RCU work on this CPU
-     * is completed. When all CPUs have executed their callback, data.cpu_count
-     * will have been incremented to include every online CPU. +     * is completed. When all CPUs have executed their callback, cpu_count
+     * will have been decremented to 0.
        */
-    call_rcu(&data.head, rcu_barrier_callback);
+    call_rcu(&head, rcu_barrier_callback);
-    while ( atomic_read(data.cpu_count) != num_online_cpus() ) +    while ( atomic_read(&cpu_count) )
       {
           process_pending_softirqs();
           cpu_relax();
       }
-    local_irq_disable();
-
-    return 0;
+    atomic_dec(&pending_count);
   }
-/*
- * As rcu_barrier() is using stop_machine_run() it is allowed to be used in
- * idle context only (see comment for stop_machine_run()).
- */

xen/common/rcupdate.c +1 -1
-int rcu_barrier(void)
+void rcu_barrier(void)

   {
-    atomic_t cpu_count = ATOMIC_INIT(0);
-    return stop_machine_run(rcu_barrier_action, &cpu_count, NR_CPUS); +    unsigned int n_cpus;

xen/common/rcupdate.c +3 -0
+
+    ASSERT(!in_irq() && local_irq_is_enabled());
+
Quoted 8 lines
Quoted 4 lines

+    for ( ;; )
+    {
+        if ( !atomic_read(&pending_count) && get_cpu_maps() ) +        {

If the whole action is happening while cpu_maps are taken why do you need to check pending_count first? I think the logic of this loop could be simplified if taken this into account.

Quoted 2 lines

get_cpu_maps() can be successful on multiple cpus (its a read_lock()). Testing pending_count avoids hammering on the cache lines.

I see - the logic was changed recently. I'm currently testing this version of the patch.

Igor

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#5 lore raw

Re: [Xen-devel] [PATCH v6 1/4] xen/rcu: don't use stop_machine_run() for rcu_barrier()

In reply to Juergen Gross
Quoted 7 lines · Juergen Gross
xen/common/rcupdate.c +0 -3
@@ -143,51 +143,85 @@ static int qhimark = 10000;
 static int qlowmark = 100;
 static int rsinterval = 1000;
 
-struct rcu_barrier_data {
-    struct rcu_head head;
-    atomic_t *cpu_count;

xen/common/rcupdate.c static int qhimark = 10000; · line 154

Quoted 10 lines
xen/common/rcupdate.c +9 -1
-};
+/*
+ * rcu_barrier() handling:
+ * cpu_count holds the number of cpus required to finish barrier handling.
+ * pending_count is initialized to nr_cpus + 1.
+ * Cpus are synchronized via softirq mechanism. rcu_barrier() is regarded to
+ * be active if pending_count is not zero. In case rcu_barrier() is called on
+ * multiple cpus it is enough to check for pending_count being not zero on entry
+ * and to call process_pending_softirqs() in a loop until pending_count drops to
+ * zero, before starting the new rcu_barrier() processing.

Everything up to here reads fine, but ...

xen/common/rcupdate.c static int qhimark = 10000; · line 160

Quoted 6 lines
xen/common/rcupdate.c +6 -0
+ * In order to avoid hangs when rcu_barrier() is called multiple times on the
+ * same cpu in fast sequence and a slave cpu couldn't drop out of the
+ * barrier handling fast enough a second counter pending_count is needed.
+ * The rcu_barrier() invoking cpu will wait until pending_count reaches 1
+ * (meaning that all cpus have finished processing the barrier) and then will
+ * reset pending_count to 0 to enable entering rcu_barrier() again.

... this starts as if pending_count wasn't mentioned before at all, which might end up being confusing (e.g. suspecting the text having gone out of sync with the code, as has happened to me).

xen/common/rcupdate.c static int qhimark = 10000; · line 168

Quoted 11 lines
xen/common/rcupdate.c +5 -3
+ */
+static atomic_t cpu_count = ATOMIC_INIT(0);
+static atomic_t pending_count = ATOMIC_INIT(0);
 
 static void rcu_barrier_callback(struct rcu_head *head)
 {
-    struct rcu_barrier_data *data = container_of(
-        head, struct rcu_barrier_data, head);
-    atomic_inc(data->cpu_count);
+    smp_wmb();     /* Make all previous writes visible to other cpus. */
+    atomic_dec(&cpu_count);

In Linux terms, wouldn't this be smp_mb__before_atomic()? If so, perhaps better if we also introduce this and its "after" sibling.

Quoted 22 lines
xen/common/rcupdate.c +5 -9
 }
 
-static int rcu_barrier_action(void *_cpu_count)
+static void rcu_barrier_action(void)
 {
-    struct rcu_barrier_data data = { .cpu_count = _cpu_count };
-
-    ASSERT(!local_irq_is_enabled());
-    local_irq_enable();
+    struct rcu_head head;
 
     /*
      * When callback is executed, all previously-queued RCU work on this CPU
-     * is completed. When all CPUs have executed their callback, data.cpu_count
-     * will have been incremented to include every online CPU.
+     * is completed. When all CPUs have executed their callback, cpu_count
+     * will have been decremented to 0.
      */
-    call_rcu(&data.head, rcu_barrier_callback);
+    call_rcu(&head, rcu_barrier_callback);
 
-    while ( atomic_read(data.cpu_count) != num_online_cpus() )

xen/common/rcupdate.c static int qhimark = 10000; · line 188

Quoted 10 lines
xen/common/rcupdate.c +2 -3
+    while ( atomic_read(&cpu_count) )
     {
         process_pending_softirqs();
         cpu_relax();
     }
 
-    local_irq_disable();
-
-    return 0;
+    atomic_dec(&pending_count);

Isn't there a barrier needed between the atomic_read() and this atomic_dec()?

xen/common/rcupdate.c static int qhimark = 10000; · line 197

Quoted 9 lines
xen/common/rcupdate.c +6 -2
+void rcu_barrier(void)
 {
-    atomic_t cpu_count = ATOMIC_INIT(0);
-    return stop_machine_run(rcu_barrier_action, &cpu_count, NR_CPUS);
+    unsigned int n_cpus;
+
+    ASSERT(!in_irq() && local_irq_is_enabled());
+
+    for ( ;; )

Nit: Canonically there ought to also be a blank between the two semicolons.

xen/common/rcupdate.c static int qhimark = 10000; · line 210

Quoted 13 lines
xen/common/rcupdate.c +13 -0
+    {
+        if ( !atomic_read(&pending_count) && get_cpu_maps() )
+        {
+            n_cpus = num_online_cpus();
+
+            if ( atomic_cmpxchg(&pending_count, 0, n_cpus + 1) == 0 )
+                break;
+
+            put_cpu_maps();
+        }
+
+        process_pending_softirqs();
+        cpu_relax();

Is this really needed after having invoked
process_pending_softirqs()?

xen/common/rcupdate.c static int qhimark = 10000; · line 213

Quoted 3 lines
xen/common/rcupdate.c +3 -0
+    }
+
+    atomic_set(&cpu_count, n_cpus);

Isn't there a barrier needed ahead of this, to order it wrt the cmpxchg?

xen/common/rcupdate.c static int qhimark = 10000; · line 214

Quoted 1 line
xen/common/rcupdate.c +1 -0
+    cpumask_raise_softirq(&cpu_online_map, RCU_SOFTIRQ);

Isn't there another barrier needed ahead of this, to order it wrt the set?

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#6 lore raw

Re: [Xen-devel] [PATCH v6 1/4] xen/rcu: don't use stop_machine_run() for rcu_barrier()

Quoted 28 lines · Jan Beulich
Quoted 7 lines · Juergen Gross
xen/common/rcupdate.c +0 -3
@@ -143,51 +143,85 @@ static int qhimark = 10000;
  static int qlowmark = 100;
  static int rsinterval = 1000;
 
-struct rcu_barrier_data {
-    struct rcu_head head;
-    atomic_t *cpu_count;

xen/common/rcupdate.c static int qhimark = 10000; · line 154

Quoted 10 lines
xen/common/rcupdate.c +9 -1
-};
+/*
+ * rcu_barrier() handling:
+ * cpu_count holds the number of cpus required to finish barrier handling.
+ * pending_count is initialized to nr_cpus + 1.
+ * Cpus are synchronized via softirq mechanism. rcu_barrier() is regarded to
+ * be active if pending_count is not zero. In case rcu_barrier() is called on
+ * multiple cpus it is enough to check for pending_count being not zero on entry
+ * and to call process_pending_softirqs() in a loop until pending_count drops to
+ * zero, before starting the new rcu_barrier() processing.

Everything up to here reads fine, but ...

xen/common/rcupdate.c static int qhimark = 10000; · line 160

Quoted 6 lines
xen/common/rcupdate.c +6 -0
+ * In order to avoid hangs when rcu_barrier() is called multiple times on the
+ * same cpu in fast sequence and a slave cpu couldn't drop out of the
+ * barrier handling fast enough a second counter pending_count is needed.
+ * The rcu_barrier() invoking cpu will wait until pending_count reaches 1
+ * (meaning that all cpus have finished processing the barrier) and then will
+ * reset pending_count to 0 to enable entering rcu_barrier() again.
Quoted 3 lines

... this starts as if pending_count wasn't mentioned before at all, which might end up being confusing (e.g. suspecting the text having gone out of sync with the code, as has happened to me).

I'll reword the comment.

Quoted 5 lines
Quoted 5 lines
xen/common/rcupdate.c +3 -0
+ */
+static atomic_t cpu_count = ATOMIC_INIT(0);
+static atomic_t pending_count = ATOMIC_INIT(0);
 
Quoted 10 lines

xen/common/rcupdate.c static int qhimark = 10000; · line 168

Quoted 7 lines
xen/common/rcupdate.c +2 -3
  static void rcu_barrier_callback(struct rcu_head *head)
  {
-    struct rcu_barrier_data *data = container_of(
-        head, struct rcu_barrier_data, head);
-    atomic_inc(data->cpu_count);
+    smp_wmb();     /* Make all previous writes visible to other cpus. */
+    atomic_dec(&cpu_count);

In Linux terms, wouldn't this be smp_mb__before_atomic()? If so, perhaps better if we also introduce this and its "after" sibling.

Okay, will add a patch.

Quoted 29 lines
Quoted 29 lines
xen/common/rcupdate.c +6 -9
  }
 
-static int rcu_barrier_action(void *_cpu_count)
+static void rcu_barrier_action(void)
  {
-    struct rcu_barrier_data data = { .cpu_count = _cpu_count };
-
-    ASSERT(!local_irq_is_enabled());
-    local_irq_enable();
+    struct rcu_head head;
 
      /*
       * When callback is executed, all previously-queued RCU work on this CPU
-     * is completed. When all CPUs have executed their callback, data.cpu_count
-     * will have been incremented to include every online CPU.
+     * is completed. When all CPUs have executed their callback, cpu_count
+     * will have been decremented to 0.
       */
-    call_rcu(&data.head, rcu_barrier_callback);
+    call_rcu(&head, rcu_barrier_callback);
 
-    while ( atomic_read(data.cpu_count) != num_online_cpus() )
+    while ( atomic_read(&cpu_count) )
      {
          process_pending_softirqs();
          cpu_relax();
      }
 
Quoted 7 lines

xen/common/rcupdate.c static int qhimark = 10000; · line 188

Quoted 4 lines
xen/common/rcupdate.c +1 -3
-    local_irq_disable();
-
-    return 0;
+    atomic_dec(&pending_count);

Isn't there a barrier needed between the atomic_read() and this atomic_dec()?

Yes, probably.

Quoted 13 lines

xen/common/rcupdate.c static int qhimark = 10000; · line 197

Quoted 10 lines
xen/common/rcupdate.c +6 -2
+void rcu_barrier(void)
  {
-    atomic_t cpu_count = ATOMIC_INIT(0);
-    return stop_machine_run(rcu_barrier_action, &cpu_count, NR_CPUS);
+    unsigned int n_cpus;
+
+    ASSERT(!in_irq() && local_irq_is_enabled());
+
+    for ( ;; )

Nit: Canonically there ought to also be a blank between the two semicolons.

Okay.

Quoted 17 lines
Quoted 4 lines
xen/common/rcupdate.c +3 -0
+    {
+        if ( !atomic_read(&pending_count) && get_cpu_maps() )
+        {

xen/common/rcupdate.c static int qhimark = 10000; · line 210

Quoted 10 lines
xen/common/rcupdate.c +10 -0
+            n_cpus = num_online_cpus();
+
+            if ( atomic_cmpxchg(&pending_count, 0, n_cpus + 1) == 0 )
+                break;
+
+            put_cpu_maps();
+        }
+
+        process_pending_softirqs();
+        cpu_relax();

Is this really needed after having invoked
process_pending_softirqs()?

With no softirq pending this loop might be rather tight. Better to give a potential other sibling a chance to make progress.

Quoted 7 lines

xen/common/rcupdate.c static int qhimark = 10000; · line 213

Quoted 4 lines
xen/common/rcupdate.c +3 -0
+    }
+
+    atomic_set(&cpu_count, n_cpus);

Isn't there a barrier needed ahead of this, to order it wrt the cmpxchg?

I'll add one.

Quoted 5 lines

xen/common/rcupdate.c static int qhimark = 10000; · line 214

Quoted 2 lines
xen/common/rcupdate.c +1 -0
+    cpumask_raise_softirq(&cpu_online_map, RCU_SOFTIRQ);

Isn't there another barrier needed ahead of this, to order it wrt the set?

No, I don't think so. cpumask_raise_softirq() needs to have appropriate ordering semantics as otherwise the softirq pending bit wouldn't be guaranteed to be seen by softirq processing.

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#7 lore raw

Re: [Xen-devel] [PATCH v6 1/4] xen/rcu: don't use stop_machine_run() for rcu_barrier()

Quoted 10 lines · Jürgen Groß
Quoted 5 lines · Jan Beulich
Quoted 1 line · Juergen Gross

+    cpumask_raise_softirq(&cpu_online_map, RCU_SOFTIRQ);

Isn't there another barrier needed ahead of this, to order it wrt the set?

No, I don't think so. cpumask_raise_softirq() needs to have appropriate ordering semantics as otherwise the softirq pending bit wouldn't be guaranteed to be seen by softirq processing.

You may have a point here, but I had given my comment after looking at cpumask_raise_softirq() and not finding any such barrier there. Oh, actually - set_bit() and test_and_set_bit() differ in their barrier characteristics; I wasn't aware of this.

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#8 lore raw

PATCH v6 2/4 xen: don't process rcu callbacks when holding a rcu_read_lock()

In reply to Juergen Gross

Some keyhandlers are calling process_pending_softirqs() while holding a rcu_read_lock(). This is wrong, as process_pending_softirqs() might activate rcu calls which should not happen inside a rcu_read_lock().

For that purpose modify process_pending_softirqs() to not allow rcu callback processing when a rcu_read_lock() is being held.

---
V3:
- add RCU_SOFTIRQ to ignore in process_pending_softirqs_norcu() (Roger Pau Monné)

V5:
- block rcu processing depending on rch_read_lock() being held or not (Jan Beulich)

---
 xen/common/softirq.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
xen/common/softirq.c +10 -2
index b83ad96d6c..00d676b62c 100644
@@ -29,6 +29,7 @@ static void __do_softirq(unsigned long ignore_mask)
 {
     unsigned int i, cpu;
     unsigned long pending;
+    bool rcu_allowed = !(ignore_mask & (1ul << RCU_SOFTIRQ));
 
     for ( ; ; )
     {
@@ -38,7 +39,7 @@ static void __do_softirq(unsigned long ignore_mask)
          */
         cpu = smp_processor_id();
 
-        if ( rcu_pending(cpu) )
+        if ( rcu_allowed && rcu_pending(cpu) )
             rcu_check_callbacks(cpu);
 
         if ( ((pending = (softirq_pending(cpu) & ~ignore_mask)) == 0)
@@ -53,9 +54,16 @@ static void __do_softirq(unsigned long ignore_mask)
 
 void process_pending_softirqs(void)
 {
+    unsigned long ignore_mask = (1ul << SCHEDULE_SOFTIRQ) |
+                                (1ul << SCHED_SLAVE_SOFTIRQ);
+
+    /* Block RCU processing in case of rcu_read_lock() held. */
+    if ( preempt_count() )
+        ignore_mask |= 1ul << RCU_SOFTIRQ;
+
     ASSERT(!in_irq() && local_irq_is_enabled());
     /* Do not enter scheduler as it can preempt the calling context. */
-    __do_softirq((1ul << SCHEDULE_SOFTIRQ) | (1ul << SCHED_SLAVE_SOFTIRQ));
+    __do_softirq(ignore_mask);
 }
 
 void do_softirq(void)
Signature · 7 lines
2.16.4


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Reviewed-by on v6 2/4
#9 lore raw

Re: [Xen-devel] [PATCH v6 2/4] xen: don't process rcu callbacks when holding a rcu_read_lock()

Quoted 8 lines · Juergen Gross

Some keyhandlers are calling process_pending_softirqs() while holding a rcu_read_lock(). This is wrong, as process_pending_softirqs() might activate rcu calls which should not happen inside a rcu_read_lock().

For that purpose modify process_pending_softirqs() to not allow rcu callback processing when a rcu_read_lock() is being held.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#10 lore raw

PATCH v6 3/4 xen/rcu: add assertions to debug build

In reply to Juergen Gross

Xen's RCU implementation relies on no softirq handling taking place while being in a RCU critical section. Add ASSERT()s in debug builds in order to catch any violations.

For that purpose modify rcu_read_[un]lock() to use a dedicated percpu counter additional to preempt_[en|dis]able() as this enables to test that condition in __do_softirq() (ASSERT_NOT_IN_ATOMIC() is not usable there due to __cpu_up() calling process_pending_softirqs() while holding the cpu hotplug lock).

While at it switch the rcu_read_[un]lock() implementation to static inline functions instead of macros.

---
V3:
- add barriers to rcu_[en|dis]able() (Roger Pau Monné)
- add rcu_quiesce_allowed() to ASSERT_NOT_IN_ATOMIC (Roger Pau Monné)
- convert macros to static inline functions
- add sanity check in rcu_read_unlock()

V4:
- use barrier() in rcu_[en|dis]able() (Julien Grall)

V5:
- use rcu counter even if not using a debug build

V6:
- keep preempt_[dis|en]able() calls

---
 xen/common/rcupdate.c      |  2 ++
 xen/common/softirq.c       |  4 +++-
 xen/include/xen/rcupdate.h | 36 +++++++++++++++++++++++++++++++++---
 3 files changed, 38 insertions(+), 4 deletions(-)
xen/common/rcupdate.c +2 -0
index ed9083d2b2..5e7bd7196f 100644
@@ -46,6 +46,8 @@
 #include <xen/cpu.h>
 #include <xen/stop_machine.h>
 
+DEFINE_PER_CPU(unsigned int, rcu_lock_cnt);
+
 /* Global control variables for rcupdate callback mechanism. */
 static struct rcu_ctrlblk {
     long cur;           /* Current batch number.                      */
xen/common/softirq.c +3 -1
index 00d676b62c..eba65c5fc0 100644
@@ -31,6 +31,8 @@ static void __do_softirq(unsigned long ignore_mask)
     unsigned long pending;
     bool rcu_allowed = !(ignore_mask & (1ul << RCU_SOFTIRQ));
 
+    ASSERT(!rcu_allowed || rcu_quiesce_allowed());
+
     for ( ; ; )
     {
         /*
@@ -58,7 +60,7 @@ void process_pending_softirqs(void)
                                 (1ul << SCHED_SLAVE_SOFTIRQ);
 
     /* Block RCU processing in case of rcu_read_lock() held. */
-    if ( preempt_count() )
+    if ( !rcu_quiesce_allowed() )
         ignore_mask |= 1ul << RCU_SOFTIRQ;
 
     ASSERT(!in_irq() && local_irq_is_enabled());
xen/include/xen/rcupdate.h +33 -3
index 31c8b86d13..d3c2b7b093 100644
@@ -32,12 +32,35 @@
 #define __XEN_RCUPDATE_H
 
 #include <xen/cache.h>
+#include <xen/compiler.h>
 #include <xen/spinlock.h>
 #include <xen/cpumask.h>
+#include <xen/percpu.h>
 #include <xen/preempt.h>
 
 #define __rcu
 
+DECLARE_PER_CPU(unsigned int, rcu_lock_cnt);
+
+static inline void rcu_quiesce_disable(void)
+{
+    preempt_disable();
+    this_cpu(rcu_lock_cnt)++;
+    barrier();
+}
+
+static inline void rcu_quiesce_enable(void)
+{
+    barrier();
+    this_cpu(rcu_lock_cnt)--;
+    preempt_enable();
+}
+
+static inline bool rcu_quiesce_allowed(void)
+{
+    return !this_cpu(rcu_lock_cnt);
+}
+
 /**
  * struct rcu_head - callback structure for use with RCU
  * @next: next update requests in a list
@@ -91,16 +114,23 @@ typedef struct _rcu_read_lock rcu_read_lock_t;
  * will be deferred until the outermost RCU read-side critical section
  * completes.
  *
- * It is illegal to block while in an RCU read-side critical section.
+ * It is illegal to process softirqs while in an RCU read-side critical section.
  */
-#define rcu_read_lock(x)       ({ ((void)(x)); preempt_disable(); })
+static inline void rcu_read_lock(rcu_read_lock_t *lock)
+{
+    rcu_quiesce_disable();
+}
 
 /**
  * rcu_read_unlock - marks the end of an RCU read-side critical section.
  *
  * See rcu_read_lock() for more information.
  */
-#define rcu_read_unlock(x)     ({ ((void)(x)); preempt_enable(); })
+static inline void rcu_read_unlock(rcu_read_lock_t *lock)
+{
+    ASSERT(!rcu_quiesce_allowed());
+    rcu_quiesce_enable();
+}
 
 /*
  * So where is rcu_write_lock()?  It does not exist, as there is no
Signature · 7 lines
2.16.4


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Reviewed-by on v6 3/4
#11 lore raw

Re: [Xen-devel] [PATCH v6 3/4] xen/rcu: add assertions to debug build

Quoted 10 lines · Juergen Gross

Xen's RCU implementation relies on no softirq handling taking place while being in a RCU critical section. Add ASSERT()s in debug builds in order to catch any violations.

For that purpose modify rcu_read_[un]lock() to use a dedicated percpu counter additional to preempt_[en|dis]able() as this enables to test that condition in __do_softirq() (ASSERT_NOT_IN_ATOMIC() is not usable there due to __cpu_up() calling process_pending_softirqs() while holding the cpu hotplug lock).

Quoted 4 lines

While at it switch the rcu_read_[un]lock() implementation to static inline functions instead of macros.

with one remark:

xen/include/xen/rcupdate.h typedef struct _rcu_read_lock rcu_read_lock_t; · line 117

Quoted 6 lines
xen/include/xen/rcupdate.h +1 -1
@@ -91,16 +114,23 @@ typedef struct _rcu_read_lock rcu_read_lock_t;
  * will be deferred until the outermost RCU read-side critical section
  * completes.
  *
- * It is illegal to block while in an RCU read-side critical section.
+ * It is illegal to process softirqs while in an RCU read-side critical section.

The latest with the re-added preempt_disable(), wouldn't this better say "... to process softirqs or block ..."?

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#12 lore raw

Re: [Xen-devel] [PATCH v6 3/4] xen/rcu: add assertions to debug build

Quoted 19 lines · Jan Beulich
Quoted 10 lines · Juergen Gross

Xen's RCU implementation relies on no softirq handling taking place while being in a RCU critical section. Add ASSERT()s in debug builds in order to catch any violations.

For that purpose modify rcu_read_[un]lock() to use a dedicated percpu counter additional to preempt_[en|dis]able() as this enables to test that condition in __do_softirq() (ASSERT_NOT_IN_ATOMIC() is not usable there due to __cpu_up() calling process_pending_softirqs() while holding the cpu hotplug lock).

Quoted 4 lines

While at it switch the rcu_read_[un]lock() implementation to static inline functions instead of macros.

with one remark:

Quoted 9 lines

xen/include/xen/rcupdate.h typedef struct _rcu_read_lock rcu_read_lock_t; · line 117

Quoted 6 lines
xen/include/xen/rcupdate.h +1 -1
@@ -91,16 +114,23 @@ typedef struct _rcu_read_lock rcu_read_lock_t;
   * will be deferred until the outermost RCU read-side critical section
   * completes.
   *
- * It is illegal to block while in an RCU read-side critical section.
+ * It is illegal to process softirqs while in an RCU read-side critical section.

The latest with the re-added preempt_disable(), wouldn't this better say "... to process softirqs or block ..."?

I can add this, but OTOH blocking without processing softirqs is not possible, as there is no other (legal) way to enter the scheduler.

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#13 lore raw

Re: [Xen-devel] [PATCH v6 3/4] xen/rcu: add assertions to debug build

Quoted 30 lines · Jürgen Groß
Quoted 19 lines · Jan Beulich
Quoted 10 lines · Juergen Gross

Xen's RCU implementation relies on no softirq handling taking place while being in a RCU critical section. Add ASSERT()s in debug builds in order to catch any violations.

For that purpose modify rcu_read_[un]lock() to use a dedicated percpu counter additional to preempt_[en|dis]able() as this enables to test that condition in __do_softirq() (ASSERT_NOT_IN_ATOMIC() is not usable there due to __cpu_up() calling process_pending_softirqs() while holding the cpu hotplug lock).

Quoted 4 lines

While at it switch the rcu_read_[un]lock() implementation to static inline functions instead of macros.

with one remark:

Quoted 9 lines

xen/include/xen/rcupdate.h typedef struct _rcu_read_lock rcu_read_lock_t; · line 117

Quoted 6 lines
xen/include/xen/rcupdate.h +1 -1
@@ -91,16 +114,23 @@ typedef struct _rcu_read_lock rcu_read_lock_t;
    * will be deferred until the outermost RCU read-side critical section
    * completes.
    *
- * It is illegal to block while in an RCU read-side critical section.
+ * It is illegal to process softirqs while in an RCU read-side critical section.

The latest with the re-added preempt_disable(), wouldn't this better say "... to process softirqs or block ..."?

Quoted 2 lines

I can add this, but OTOH blocking without processing softirqs is not possible, as there is no other (legal) way to enter the scheduler.

Sure, but that's still implicit, but could do with saying explicitly.

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#14 lore raw

Re: [Xen-devel] [PATCH v6 3/4] xen/rcu: add assertions to debug build

Quoted 32 lines · Jan Beulich
Quoted 31 lines · Jürgen Groß
Quoted 29 lines · Jan Beulich
Quoted 10 lines · Juergen Gross

Xen's RCU implementation relies on no softirq handling taking place while being in a RCU critical section. Add ASSERT()s in debug builds in order to catch any violations.

For that purpose modify rcu_read_[un]lock() to use a dedicated percpu counter additional to preempt_[en|dis]able() as this enables to test that condition in __do_softirq() (ASSERT_NOT_IN_ATOMIC() is not usable there due to __cpu_up() calling process_pending_softirqs() while holding the cpu hotplug lock).

Quoted 4 lines

While at it switch the rcu_read_[un]lock() implementation to static inline functions instead of macros.

with one remark:

Quoted 7 lines
xen/include/xen/rcupdate.h +1 -1
@@ -91,16 +114,23 @@ typedef struct _rcu_read_lock rcu_read_lock_t;
    * will be deferred until the outermost RCU read-side critical section
    * completes.
    *
- * It is illegal to block while in an RCU read-side critical section.
+ * It is illegal to process softirqs while in an RCU read-side 

critical section.

The latest with the re-added preempt_disable(), wouldn't this better say "... to process softirqs or block ..."?

Quoted 4 lines
Quoted 2 lines

I can add this, but OTOH blocking without processing softirqs is not possible, as there is no other (legal) way to enter the scheduler.

Sure, but that's still implicit, but could do with saying explicitly.

Okay.

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#15 lore raw

PATCH v6 4/4 xen/rcu: add per-lock counter in debug builds

In reply to Juergen Gross

Add a lock specific counter to rcu read locks in debug builds. This allows to test for matching lock/unlock calls.

This will help to avoid cases like the one fixed by commit 98ed1f43cc2c89 where different rcu read locks were referenced in the lock and unlock calls.

---
V5:
- updated commit message (Jan Beulich)

---
 xen/include/xen/rcupdate.h | 46 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 13 deletions(-)
xen/include/xen/rcupdate.h +33 -13
index d3c2b7b093..e0c3b16e7d 100644
@@ -37,21 +37,50 @@
 #include <xen/cpumask.h>
 #include <xen/percpu.h>
 #include <xen/preempt.h>
+#include <asm/atomic.h>
 
 #define __rcu
 
+#ifndef NDEBUG
+/* * Lock type for passing to rcu_read_{lock,unlock}. */
+struct _rcu_read_lock {
+    atomic_t cnt;
+};
+typedef struct _rcu_read_lock rcu_read_lock_t;
+#define DEFINE_RCU_READ_LOCK(x) rcu_read_lock_t x = { .cnt = ATOMIC_INIT(0) }
+#define RCU_READ_LOCK_INIT(x)   atomic_set(&(x)->cnt, 0)
+
+#else
+/*
+ * Dummy lock type for passing to rcu_read_{lock,unlock}. Currently exists
+ * only to document the reason for rcu_read_lock() critical sections.
+ */
+struct _rcu_read_lock {};
+typedef struct _rcu_read_lock rcu_read_lock_t;
+#define DEFINE_RCU_READ_LOCK(x) rcu_read_lock_t x
+#define RCU_READ_LOCK_INIT(x)
+
+#endif
+
 DECLARE_PER_CPU(unsigned int, rcu_lock_cnt);
 
-static inline void rcu_quiesce_disable(void)
+static inline void rcu_quiesce_disable(rcu_read_lock_t *lock)
 {
     preempt_disable();
     this_cpu(rcu_lock_cnt)++;
+#ifndef NDEBUG
+    atomic_inc(&lock->cnt);
+#endif
     barrier();
 }
 
-static inline void rcu_quiesce_enable(void)
+static inline void rcu_quiesce_enable(rcu_read_lock_t *lock)
 {
     barrier();
+#ifndef NDEBUG
+    ASSERT(atomic_read(&lock->cnt));
+    atomic_dec(&lock->cnt);
+#endif
     this_cpu(rcu_lock_cnt)--;
     preempt_enable();
 }
@@ -81,15 +110,6 @@ struct rcu_head {
 int rcu_pending(int cpu);
 int rcu_needs_cpu(int cpu);
 
-/*
- * Dummy lock type for passing to rcu_read_{lock,unlock}. Currently exists
- * only to document the reason for rcu_read_lock() critical sections.
- */
-struct _rcu_read_lock {};
-typedef struct _rcu_read_lock rcu_read_lock_t;
-#define DEFINE_RCU_READ_LOCK(x) rcu_read_lock_t x
-#define RCU_READ_LOCK_INIT(x)
-
 /**
  * rcu_read_lock - mark the beginning of an RCU read-side critical section.
  *
@@ -118,7 +138,7 @@ typedef struct _rcu_read_lock rcu_read_lock_t;
  */
 static inline void rcu_read_lock(rcu_read_lock_t *lock)
 {
-    rcu_quiesce_disable();
+    rcu_quiesce_disable(lock);
 }
 
 /**
@@ -129,7 +149,7 @@ static inline void rcu_read_lock(rcu_read_lock_t *lock)
 static inline void rcu_read_unlock(rcu_read_lock_t *lock)
 {
     ASSERT(!rcu_quiesce_allowed());
-    rcu_quiesce_enable();
+    rcu_quiesce_enable(lock);
 }
 
 /*
Signature · 7 lines
2.16.4


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Reviewed-by on v6 4/4
#16 lore raw

Re: [Xen-devel] [PATCH v6 4/4] xen/rcu: add per-lock counter in debug builds

Quoted 8 lines · Juergen Gross

Add a lock specific counter to rcu read locks in debug builds. This allows to test for matching lock/unlock calls.

This will help to avoid cases like the one fixed by commit 98ed1f43cc2c89 where different rcu read locks were referenced in the lock and unlock calls.

albeit to be honest I'm not fully convinced we need to go this far.

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel