Skip to contentSkip to conversation

user-mode: Prune build dependencies (part 2)

PATCH In review Philippe Mathieu-Daudé 4 participants 15 messages Mar 13, 2020 – Mar 15, 2020 Block layer

lore
Share & tools
lore
#0 lore raw

cover user-mode: Prune build dependencies (part 2)

This is the second part of a series reducing user-mode dependencies. By stripping out unused code, the build and testing time is reduced (as is space used by objects).

Part 2:
- Extract code not related to user-mode from qapi/misc.json

Based-on: <[email protected]>

Philippe Mathieu-Daudé (9):
target/i386: Restrict X86CPUFeatureWord to X86 targets qapi/misc: Move add_client command with chardev code qapi/misc: Restrict LostTickPolicy enum to machine code qapi/misc: Restrict balloon-related commands to machine code qapi/misc: Move query-uuid command with block code qapi/misc: Restrict query-vm-generation-id command to machine code qapi/misc: Restrict ACPI commands to machine code qapi/misc: Restrict PCI commands to machine code qapi/misc: Restrict device memory commands to machine code

 qapi/block-core.json                 |  30 +
 qapi/char.json                       |  32 ++
 qapi/machine-target.json             |  45 ++
 qapi/machine.json                    | 766 ++++++++++++++++++++++++--
 qapi/misc.json                       | 788 ---------------------------
 include/hw/acpi/acpi_dev_interface.h |   2 +-
 include/hw/mem/memory-device.h       |   1 +
 include/hw/rtc/mc146818rtc.h         |   2 +-
 include/hw/virtio/virtio-pmem.h      |   2 +-
 include/sysemu/balloon.h             |   2 +-
 balloon.c                            |   2 +-
 block/iscsi.c                        |   2 +-
 hw/acpi/core.c                       |   2 +-
 hw/acpi/cpu.c                        |   2 +-
 hw/acpi/memory_hotplug.c             |   2 +-
 hw/acpi/vmgenid.c                    |   2 +-
 hw/core/qdev-properties.c            |   1 +
 hw/i386/kvm/i8254.c                  |   2 +-
 hw/pci/pci-stub.c                    |   2 +-
 hw/pci/pci.c                         |   2 +-
 hw/virtio/virtio-balloon.c           |   2 +-
 monitor/hmp-cmds.c                   |   1 +
 monitor/qmp-cmds.c                   |   1 +
 stubs/uuid.c                         |   2 +-
 stubs/vmgenid.c                      |   2 +-
 target/i386/cpu.c                    |   2 +-
 target/i386/machine-stub.c           |  22 +
 target/i386/Makefile.objs            |   3 +-
 28 files changed, 876 insertions(+), 848 deletions(-)
 create mode 100644 target/i386/machine-stub.c
Signature · 1 line
2.21.1
#1 lore raw

PATCH 1/9 target/i386: Restrict X86CPUFeatureWord to X86 targets

Move out x86-specific structures from generic machine code.

---
 qapi/machine-target.json   | 45 ++++++++++++++++++++++++++++++++++++++
 qapi/machine.json          | 42 -----------------------------------
 target/i386/cpu.c          |  2 +-
 target/i386/machine-stub.c | 22 +++++++++++++++++++
 target/i386/Makefile.objs  |  3 ++-
 5 files changed, 70 insertions(+), 44 deletions(-)
 create mode 100644 target/i386/machine-stub.c
qapi/machine-target.json +45 -0
index f2c82949d8..fb7a4b7850 100644
@@ -3,6 +3,51 @@
 # This work is licensed under the terms of the GNU GPL, version 2 or later.
 # See the COPYING file in the top-level directory.
 
+##
+# @X86CPURegister32:
+#
+# A X86 32-bit register
+#
+# Since: 1.5
+##
+{ 'enum': 'X86CPURegister32',
+  'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ],
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @X86CPUFeatureWordInfo:
+#
+# Information about a X86 CPU feature word
+#
+# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word
+#
+# @cpuid-input-ecx: Input ECX value for CPUID instruction for that
+#                   feature word
+#
+# @cpuid-register: Output register containing the feature bits
+#
+# @features: value of output register, containing the feature bits
+#
+# Since: 1.5
+##
+{ 'struct': 'X86CPUFeatureWordInfo',
+  'data': { 'cpuid-input-eax': 'int',
+            '*cpuid-input-ecx': 'int',
+            'cpuid-register': 'X86CPURegister32',
+            'features': 'int' },
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @DummyForceArrays:
+#
+# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
+#
+# Since: 2.5
+##
+{ 'struct': 'DummyForceArrays',
+  'data': { 'unused': ['X86CPUFeatureWordInfo'] },
+  'if': 'defined(TARGET_I386)' }
+
 ##
 # @CpuModelInfo:
 #
qapi/machine.json +0 -42

48 lines not on this page · raw message

target/i386/cpu.c +1 -1
index a84553e50c..0753fe4935 100644
@@ -37,7 +37,7 @@
 #include "qemu/option.h"
 #include "qemu/config-file.h"
 #include "qapi/error.h"
-#include "qapi/qapi-visit-machine.h"
+#include "qapi/qapi-visit-machine-target.h"
 #include "qapi/qapi-visit-run-state.h"
 #include "qapi/qmp/qdict.h"
 #include "qapi/qmp/qerror.h"
target/i386/machine-stub.c new file +22 -0
new file mode 100644
index 0000000000..cb301af057
@@ -0,0 +1,22 @@
+/*
+ * QAPI x86 CPU features stub
+ *
+ * Copyright (c) 2020 Red Hat, Inc.
+ *
+ * Author:
+ *   Philippe Mathieu-Daudé <[email protected]>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qapi-visit-machine-target.h"
+
+void visit_type_X86CPUFeatureWordInfoList(Visitor *v, const char *name,
+                                      X86CPUFeatureWordInfoList **obj,
+                                      Error **errp)
+{
+}
target/i386/Makefile.objs +2 -1
index 48e0c28434..1cdfc9f50c 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_HAX) += hax-all.o hax-mem.o hax-posix.o
 endif
 obj-$(CONFIG_HVF) += hvf/
 obj-$(CONFIG_WHPX) += whpx-all.o
-endif
+endif # CONFIG_SOFTMMU
 obj-$(CONFIG_SEV) += sev.o
 obj-$(call lnot,$(CONFIG_SEV)) += sev-stub.o
+obj-$(call lnot,$(CONFIG_SOFTMMU)) += machine-stub.o
Signature · 1 line
2.21.1
Acked-by on v1 1/9
#2 lore raw

Re: [PATCH 1/9] target/i386: Restrict X86CPUFeatureWord to X86 targets

Quoted 11 lines · Philippe Mathieu-Daudé

Move out x86-specific structures from generic machine code.

---
 qapi/machine-target.json   | 45 ++++++++++++++++++++++++++++++++++++++
 qapi/machine.json          | 42 -----------------------------------
 target/i386/cpu.c          |  2 +-
 target/i386/machine-stub.c | 22 +++++++++++++++++++
 target/i386/Makefile.objs  |  3 ++-
 5 files changed, 70 insertions(+), 44 deletions(-)
 create mode 100644 target/i386/machine-stub.c

r~

#3 lore raw

PATCH 2/9 qapi/misc: Move add_client command with chardev code

In reply to Philippe Mathieu-Daudé
---
 qapi/char.json     | 32 ++++++++++++++++++++++++++++++++
 qapi/misc.json     | 32 --------------------------------
 monitor/qmp-cmds.c |  1 +
 3 files changed, 33 insertions(+), 32 deletions(-)
qapi/char.json +32 -0
index 6907b2bfdb..8b7baf11eb 100644
@@ -572,3 +572,35 @@
 { 'event': 'VSERPORT_CHANGE',
   'data': { 'id': 'str',
             'open': 'bool' } }
+
+##
+# @add_client:
+#
+# Allow client connections for VNC, Spice and socket based
+# character devices to be passed in to QEMU via SCM_RIGHTS.
+#
+# @protocol: protocol name. Valid names are "vnc", "spice" or the
+#            name of a character device (eg. from -chardev id=XXXX)
+#
+# @fdname: file descriptor name previously passed via 'getfd' command
+#
+# @skipauth: whether to skip authentication. Only applies
+#            to "vnc" and "spice" protocols
+#
+# @tls: whether to perform TLS. Only applies to the "spice"
+#       protocol
+#
+# Returns: nothing on success.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
+#                                              "fdname": "myclient" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'add_client',
+  'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
+            '*tls': 'bool' } }
qapi/misc.json +0 -32
index c18fe681fb..e84e6823e9 100644
@@ -39,38 +39,6 @@
 { 'enum': 'LostTickPolicy',
   'data': ['discard', 'delay', 'slew' ] }
 
-##
-# @add_client:
-#
-# Allow client connections for VNC, Spice and socket based
-# character devices to be passed in to QEMU via SCM_RIGHTS.
-#
-# @protocol: protocol name. Valid names are "vnc", "spice" or the
-#            name of a character device (eg. from -chardev id=XXXX)
-#
-# @fdname: file descriptor name previously passed via 'getfd' command
-#
-# @skipauth: whether to skip authentication. Only applies
-#            to "vnc" and "spice" protocols
-#
-# @tls: whether to perform TLS. Only applies to the "spice"
-#       protocol
-#
-# Returns: nothing on success.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
-#                                              "fdname": "myclient" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'add_client',
-  'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
-            '*tls': 'bool' } }
-
 ##
 # @NameInfo:
 #
monitor/qmp-cmds.c +1 -0
index 864cbfa32e..67d95b4af7 100644
@@ -31,6 +31,7 @@
 #include "sysemu/block-backend.h"
 #include "qapi/error.h"
 #include "qapi/qapi-commands-block.h"
+#include "qapi/qapi-commands-char.h"
 #include "qapi/qapi-commands-control.h"
 #include "qapi/qapi-commands-machine.h"
 #include "qapi/qapi-commands-misc.h"
Signature · 1 line
2.21.1
#4 lore raw

Re: [PATCH 2/9] qapi/misc: Move add_client command with chardev code

Hi

Quoted 2 lines · Philippe Mathieu-Daudé

Without looking at the rest of the series, I fail to see the improvement, quite the opposite. A bit of context?

Quoted 104 lines
---
 qapi/char.json     | 32 ++++++++++++++++++++++++++++++++
 qapi/misc.json     | 32 --------------------------------
 monitor/qmp-cmds.c |  1 +
 3 files changed, 33 insertions(+), 32 deletions(-)
qapi/char.json +32 -0
index 6907b2bfdb..8b7baf11eb 100644
@@ -572,3 +572,35 @@
 { 'event': 'VSERPORT_CHANGE',
   'data': { 'id': 'str',
             'open': 'bool' } }
+
+##
+# @add_client:
+#
+# Allow client connections for VNC, Spice and socket based
+# character devices to be passed in to QEMU via SCM_RIGHTS.
+#
+# @protocol: protocol name. Valid names are "vnc", "spice" or the
+#            name of a character device (eg. from -chardev id=XXXX)
+#
+# @fdname: file descriptor name previously passed via 'getfd' command
+#
+# @skipauth: whether to skip authentication. Only applies
+#            to "vnc" and "spice" protocols
+#
+# @tls: whether to perform TLS. Only applies to the "spice"
+#       protocol
+#
+# Returns: nothing on success.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
+#                                              "fdname": "myclient" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'add_client',
+  'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
+            '*tls': 'bool' } }
qapi/misc.json +0 -32
index c18fe681fb..e84e6823e9 100644
@@ -39,38 +39,6 @@
 { 'enum': 'LostTickPolicy',
   'data': ['discard', 'delay', 'slew' ] }
 
-##
-# @add_client:
-#
-# Allow client connections for VNC, Spice and socket based
-# character devices to be passed in to QEMU via SCM_RIGHTS.
-#
-# @protocol: protocol name. Valid names are "vnc", "spice" or the
-#            name of a character device (eg. from -chardev id=XXXX)
-#
-# @fdname: file descriptor name previously passed via 'getfd' command
-#
-# @skipauth: whether to skip authentication. Only applies
-#            to "vnc" and "spice" protocols
-#
-# @tls: whether to perform TLS. Only applies to the "spice"
-#       protocol
-#
-# Returns: nothing on success.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
-#                                              "fdname": "myclient" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'add_client',
-  'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
-            '*tls': 'bool' } }
-
 ##
 # @NameInfo:
 #
monitor/qmp-cmds.c +1 -1
index 864cbfa32e..67d95b4af7 100644
@@ -31,6 +31,7 @@
 #include "sysemu/block-backend.h"
 #include "qapi/error.h"
 #include "qapi/qapi-commands-block.h"
+#include "qapi/qapi-commands-char.h"
 #include "qapi/qapi-commands-control.h"
 #include "qapi/qapi-commands-machine.h"
 #include "qapi/qapi-commands-misc.h"
--

2.21.1

#5 lore raw

Re: [PATCH 2/9] qapi/misc: Move add_client command with chardev code

Quoted 9 lines · Marc-André Lureau

Hi

Quoted 2 lines · Philippe Mathieu-Daudé

Without looking at the rest of the series, I fail to see the improvement, quite the opposite. A bit of context?

You are right this not needed. I guess remember I had a linker failure at some point while working on this series but I then take some patches out while rebasing, so it might be the result of an earlier incorrect patch.

Quoted 106 lines
Quoted 105 lines
---
  qapi/char.json     | 32 ++++++++++++++++++++++++++++++++
  qapi/misc.json     | 32 --------------------------------
  monitor/qmp-cmds.c |  1 +
  3 files changed, 33 insertions(+), 32 deletions(-)
qapi/char.json +32 -0
index 6907b2bfdb..8b7baf11eb 100644
@@ -572,3 +572,35 @@
  { 'event': 'VSERPORT_CHANGE',
    'data': { 'id': 'str',
              'open': 'bool' } }
+
+##
+# @add_client:
+#
+# Allow client connections for VNC, Spice and socket based
+# character devices to be passed in to QEMU via SCM_RIGHTS.
+#
+# @protocol: protocol name. Valid names are "vnc", "spice" or the
+#            name of a character device (eg. from -chardev id=XXXX)
+#
+# @fdname: file descriptor name previously passed via 'getfd' command
+#
+# @skipauth: whether to skip authentication. Only applies
+#            to "vnc" and "spice" protocols
+#
+# @tls: whether to perform TLS. Only applies to the "spice"
+#       protocol
+#
+# Returns: nothing on success.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
+#                                              "fdname": "myclient" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'add_client',
+  'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
+            '*tls': 'bool' } }
qapi/misc.json +0 -32
index c18fe681fb..e84e6823e9 100644
@@ -39,38 +39,6 @@
  { 'enum': 'LostTickPolicy',
    'data': ['discard', 'delay', 'slew' ] }
 
-##
-# @add_client:
-#
-# Allow client connections for VNC, Spice and socket based
-# character devices to be passed in to QEMU via SCM_RIGHTS.
-#
-# @protocol: protocol name. Valid names are "vnc", "spice" or the
-#            name of a character device (eg. from -chardev id=XXXX)
-#
-# @fdname: file descriptor name previously passed via 'getfd' command
-#
-# @skipauth: whether to skip authentication. Only applies
-#            to "vnc" and "spice" protocols
-#
-# @tls: whether to perform TLS. Only applies to the "spice"
-#       protocol
-#
-# Returns: nothing on success.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
-#                                              "fdname": "myclient" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'add_client',
-  'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
-            '*tls': 'bool' } }
-
  ##
  # @NameInfo:
  #
monitor/qmp-cmds.c +1 -1
index 864cbfa32e..67d95b4af7 100644
@@ -31,6 +31,7 @@
  #include "sysemu/block-backend.h"
  #include "qapi/error.h"
  #include "qapi/qapi-commands-block.h"
+#include "qapi/qapi-commands-char.h"
  #include "qapi/qapi-commands-control.h"
  #include "qapi/qapi-commands-machine.h"
  #include "qapi/qapi-commands-misc.h"
--

2.21.1

#6 lore raw

PATCH 3/9 qapi/misc: Restrict LostTickPolicy enum to machine code

In reply to Philippe Mathieu-Daudé
---
 qapi/machine.json            | 32 ++++++++++++++++++++++++++++++++
 qapi/misc.json               | 32 --------------------------------
 include/hw/rtc/mc146818rtc.h |  2 +-
 hw/core/qdev-properties.c    |  1 +
 hw/i386/kvm/i8254.c          |  2 +-
 5 files changed, 35 insertions(+), 34 deletions(-)
qapi/machine.json +32 -0
index de05730704..07ffc07ba2 100644
@@ -415,6 +415,38 @@
 ##
 { 'command': 'query-target', 'returns': 'TargetInfo' }
 
+##
+# @LostTickPolicy:
+#
+# Policy for handling lost ticks in timer devices.  Ticks end up getting
+# lost when, for example, the guest is paused.
+#
+# @discard: throw away the missed ticks and continue with future injection
+#           normally.  The guest OS will see the timer jump ahead by a
+#           potentially quite significant amount all at once, as if the
+#           intervening chunk of time had simply not existed; needless to
+#           say, such a sudden jump can easily confuse a guest OS which is
+#           not specifically prepared to deal with it.  Assuming the guest
+#           OS can deal correctly with the time jump, the time in the guest
+#           and in the host should now match.
+#
+# @delay: continue to deliver ticks at the normal rate.  The guest OS will
+#         not notice anything is amiss, as from its point of view time will
+#         have continued to flow normally.  The time in the guest should now
+#         be behind the time in the host by exactly the amount of time during
+#         which ticks have been missed.
+#
+# @slew: deliver ticks at a higher rate to catch up with the missed ticks.
+#        The guest OS will not notice anything is amiss, as from its point
+#        of view time will have continued to flow normally.  Once the timer
+#        has managed to catch up with all the missing ticks, the time in
+#        the guest and in the host should match.
+#
+# Since: 2.0
+##
+{ 'enum': 'LostTickPolicy',
+  'data': ['discard', 'delay', 'slew' ] }
+
 ##
 # @NumaOptionsType:
 #
qapi/misc.json +0 -32
index e84e6823e9..f827bdc8f6 100644
@@ -7,38 +7,6 @@
 
 { 'include': 'common.json' }
 
-##
-# @LostTickPolicy:
-#
-# Policy for handling lost ticks in timer devices.  Ticks end up getting
-# lost when, for example, the guest is paused.
-#
-# @discard: throw away the missed ticks and continue with future injection
-#           normally.  The guest OS will see the timer jump ahead by a
-#           potentially quite significant amount all at once, as if the
-#           intervening chunk of time had simply not existed; needless to
-#           say, such a sudden jump can easily confuse a guest OS which is
-#           not specifically prepared to deal with it.  Assuming the guest
-#           OS can deal correctly with the time jump, the time in the guest
-#           and in the host should now match.
-#
-# @delay: continue to deliver ticks at the normal rate.  The guest OS will
-#         not notice anything is amiss, as from its point of view time will
-#         have continued to flow normally.  The time in the guest should now
-#         be behind the time in the host by exactly the amount of time during
-#         which ticks have been missed.
-#
-# @slew: deliver ticks at a higher rate to catch up with the missed ticks.
-#        The guest OS will not notice anything is amiss, as from its point
-#        of view time will have continued to flow normally.  Once the timer
-#        has managed to catch up with all the missing ticks, the time in
-#        the guest and in the host should match.
-#
-# Since: 2.0
-##
-{ 'enum': 'LostTickPolicy',
-  'data': ['discard', 'delay', 'slew' ] }
-
 ##
 # @NameInfo:
 #
include/hw/rtc/mc146818rtc.h +1 -1
index 10c93a096a..58a7748c66 100644
@@ -9,7 +9,7 @@
 #ifndef HW_RTC_MC146818RTC_H
 #define HW_RTC_MC146818RTC_H
 
-#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-machine.h"
 #include "qemu/queue.h"
 #include "qemu/timer.h"
 #include "hw/isa/isa.h"
hw/core/qdev-properties.c +1 -0
index 2047114fca..59380ed761 100644
@@ -4,6 +4,7 @@
 #include "qapi/error.h"
 #include "hw/pci/pci.h"
 #include "qapi/qapi-types-block.h"
+#include "qapi/qapi-types-machine.h"
 #include "qapi/qapi-types-misc.h"
 #include "qapi/qmp/qerror.h"
 #include "qemu/ctype.h"
hw/i386/kvm/i8254.c +1 -1
index 876f5aa6fa..22ba6149b5 100644
@@ -25,7 +25,7 @@
 
 #include "qemu/osdep.h"
 #include <linux/kvm.h>
-#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-machine.h"
 #include "qapi/error.h"
 #include "qemu/module.h"
 #include "qemu/timer.h"
Signature · 1 line
2.21.1
#7 lore raw

PATCH 4/9 qapi/misc: Restrict balloon-related commands to machine code

In reply to Philippe Mathieu-Daudé
---
 qapi/machine.json          | 83 ++++++++++++++++++++++++++++++++++++++
 qapi/misc.json             | 83 --------------------------------------
 include/sysemu/balloon.h   |  2 +-
 balloon.c                  |  2 +-
 hw/virtio/virtio-balloon.c |  2 +-
 monitor/hmp-cmds.c         |  1 +
 6 files changed, 87 insertions(+), 86 deletions(-)
qapi/machine.json +83 -0
index 07ffc07ba2..c096efbea3 100644
@@ -915,3 +915,86 @@
   'data': 'NumaOptions',
   'allow-preconfig': true
 }
+
+##
+# @balloon:
+#
+# Request the balloon driver to change its balloon size.
+#
+# @value: the target size of the balloon in bytes
+#
+# Returns: - Nothing on success
+#          - If the balloon driver is enabled but not functional because the KVM
+#            kernel module cannot support it, KvmMissingCap
+#          - If no balloon device is present, DeviceNotActive
+#
+# Notes: This command just issues a request to the guest.  When it returns,
+#        the balloon size may not have changed.  A guest can change the balloon
+#        size independent of this command.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'balloon', 'data': {'value': 'int'} }
+
+##
+# @BalloonInfo:
+#
+# Information about the guest balloon device.
+#
+# @actual: the number of bytes the balloon currently contains
+#
+# Since: 0.14.0
+#
+##
+{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
+
+##
+# @query-balloon:
+#
+# Return information about the balloon device.
+#
+# Returns: - @BalloonInfo on success
+#          - If the balloon driver is enabled but not functional because the KVM
+#            kernel module cannot support it, KvmMissingCap
+#          - If no balloon device is present, DeviceNotActive
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-balloon" }
+# <- { "return": {
+#          "actual": 1073741824,
+#       }
+#    }
+#
+##
+{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
+
+##
+# @BALLOON_CHANGE:
+#
+# Emitted when the guest changes the actual BALLOON level. This value is
+# equivalent to the @actual field return by the 'query-balloon' command
+#
+# @actual: actual level of the guest memory balloon in bytes
+#
+# Note: this event is rate-limited.
+#
+# Since: 1.2
+#
+# Example:
+#
+# <- { "event": "BALLOON_CHANGE",
+#      "data": { "actual": 944766976 },
+#      "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
+#
+##
+{ 'event': 'BALLOON_CHANGE',
+  'data': { 'actual': 'int' } }
qapi/misc.json +0 -83

95 lines not on this page · raw message

include/sysemu/balloon.h +1 -1
index aea0c44985..b3de4b92b9 100644
@@ -15,7 +15,7 @@
 #define QEMU_BALLOON_H
 
 #include "exec/cpu-common.h"
-#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-machine.h"
 
 typedef void (QEMUBalloonEvent)(void *opaque, ram_addr_t target);
 typedef void (QEMUBalloonStatus)(void *opaque, BalloonInfo *info);
balloon.c +1 -1
index f104b42961..ee9c59252d 100644
@@ -30,7 +30,7 @@
 #include "sysemu/balloon.h"
 #include "trace-root.h"
 #include "qapi/error.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-machine.h"
 #include "qapi/qmp/qerror.h"
 
 static QEMUBalloonEvent *balloon_event_fn;
hw/virtio/virtio-balloon.c +1 -1
index a4729f7fc9..07ad36b143 100644
@@ -24,7 +24,7 @@
 #include "hw/virtio/virtio-balloon.h"
 #include "exec/address-spaces.h"
 #include "qapi/error.h"
-#include "qapi/qapi-events-misc.h"
+#include "qapi/qapi-events-machine.h"
 #include "qapi/visitor.h"
 #include "trace.h"
 #include "qemu/error-report.h"
monitor/hmp-cmds.c +1 -0
index 58724031ea..97cd340b2e 100644
@@ -32,6 +32,7 @@
 #include "qapi/qapi-commands-block.h"
 #include "qapi/qapi-commands-char.h"
 #include "qapi/qapi-commands-control.h"
+#include "qapi/qapi-commands-machine.h"
 #include "qapi/qapi-commands-migration.h"
 #include "qapi/qapi-commands-misc.h"
 #include "qapi/qapi-commands-net.h"
Signature · 1 line
2.21.1
#8 lore raw

PATCH 5/9 qapi/misc: Move query-uuid command with block code

In reply to Philippe Mathieu-Daudé
---
 qapi/block-core.json | 30 ++++++++++++++++++++++++++++++
 qapi/misc.json       | 30 ------------------------------
 block/iscsi.c        |  2 +-
 stubs/uuid.c         |  2 +-
 4 files changed, 32 insertions(+), 32 deletions(-)
qapi/block-core.json +30 -0
index 91586fb1fb..5c3fa6c5d0 100644
@@ -5415,3 +5415,33 @@
 { 'command': 'blockdev-snapshot-delete-internal-sync',
   'data': { 'device': 'str', '*id': 'str', '*name': 'str'},
   'returns': 'SnapshotInfo' }
+
+##
+# @UuidInfo:
+#
+# Guest UUID information (Universally Unique Identifier).
+#
+# @UUID: the UUID of the guest
+#
+# Since: 0.14.0
+#
+# Notes: If no UUID was specified for the guest, a null UUID is returned.
+##
+{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
+
+##
+# @query-uuid:
+#
+# Query the guest UUID information.
+#
+# Returns: The @UuidInfo for the guest
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-uuid" }
+# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
+#
+##
+{ 'command': 'query-uuid', 'returns': 'UuidInfo', 'allow-preconfig': true }
qapi/misc.json +0 -30
index 74cbe253f2..18cd0719f3 100644
@@ -65,36 +65,6 @@
 ##
 { 'command': 'query-kvm', 'returns': 'KvmInfo' }
 
-##
-# @UuidInfo:
-#
-# Guest UUID information (Universally Unique Identifier).
-#
-# @UUID: the UUID of the guest
-#
-# Since: 0.14.0
-#
-# Notes: If no UUID was specified for the guest, a null UUID is returned.
-##
-{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
-
-##
-# @query-uuid:
-#
-# Query the guest UUID information.
-#
-# Returns: The @UuidInfo for the guest
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-uuid" }
-# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
-#
-##
-{ 'command': 'query-uuid', 'returns': 'UuidInfo', 'allow-preconfig': true }
-
 ##
 # @IOThreadInfo:
 #
block/iscsi.c +1 -1
index 682abd8e09..68ed5cf3f8 100644
@@ -42,7 +42,7 @@
 #include "qemu/uuid.h"
 #include "sysemu/replay.h"
 #include "qapi/error.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-block-core.h"
 #include "qapi/qmp/qdict.h"
 #include "qapi/qmp/qstring.h"
 #include "crypto/secret.h"
stubs/uuid.c +1 -1
index 67f182fa3a..9ef75fdae4 100644
@@ -1,5 +1,5 @@
 #include "qemu/osdep.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-block-core.h"
 #include "qemu/uuid.h"
 
 UuidInfo *qmp_query_uuid(Error **errp)
Signature · 1 line
2.21.1
#9 lore raw

PATCH 6/9 qapi/misc: Restrict query-vm-generation-id command to machine code

In reply to Philippe Mathieu-Daudé
---
 qapi/machine.json | 20 ++++++++++++++++++++
 qapi/misc.json    | 21 ---------------------
 hw/acpi/vmgenid.c |  2 +-
 stubs/vmgenid.c   |  2 +-
 4 files changed, 22 insertions(+), 23 deletions(-)
qapi/machine.json +20 -0
index c096efbea3..1a2a4b0d48 100644
@@ -415,6 +415,26 @@
 ##
 { 'command': 'query-target', 'returns': 'TargetInfo' }
 
+##
+# @GuidInfo:
+#
+# GUID information.
+#
+# @guid: the globally unique identifier
+#
+# Since: 2.9
+##
+{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} }
+
+##
+# @query-vm-generation-id:
+#
+# Show Virtual Machine Generation ID
+#
+# Since: 2.9
+##
+{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' }
+
 ##
 # @LostTickPolicy:
 #
qapi/misc.json +0 -21
index 18cd0719f3..8e0902caf4 100644
@@ -1351,24 +1351,3 @@
 #
 ##
 { 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
-
-##
-# @GuidInfo:
-#
-# GUID information.
-#
-# @guid: the globally unique identifier
-#
-# Since: 2.9
-##
-{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} }
-
-##
-# @query-vm-generation-id:
-#
-# Show Virtual Machine Generation ID
-#
-# Since: 2.9
-##
-{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' }
-
hw/acpi/vmgenid.c +1 -1
index 2df7623d74..2b26bacaf8 100644
@@ -12,7 +12,7 @@
 
 #include "qemu/osdep.h"
 #include "qapi/error.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-machine.h"
 #include "qemu/module.h"
 #include "hw/acpi/acpi.h"
 #include "hw/acpi/aml-build.h"
stubs/vmgenid.c +1 -1
index 568e42b064..bfad656c6c 100644
@@ -1,6 +1,6 @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-machine.h"
 #include "qapi/qmp/qerror.h"
 
 GuidInfo *qmp_query_vm_generation_id(Error **errp)
Signature · 1 line
2.21.1
#10 lore raw

PATCH 7/9 qapi/misc: Restrict ACPI commands to machine code

In reply to Philippe Mathieu-Daudé
---
 qapi/machine.json                    | 154 +++++++++++++++++++++++++++
 qapi/misc.json                       | 154 ---------------------------
 include/hw/acpi/acpi_dev_interface.h |   2 +-
 hw/acpi/core.c                       |   2 +-
 hw/acpi/cpu.c                        |   2 +-
 hw/acpi/memory_hotplug.c             |   2 +-
 6 files changed, 158 insertions(+), 158 deletions(-)
qapi/machine.json +154 -0
index 1a2a4b0d48..f77ee63730 100644
@@ -1018,3 +1018,157 @@
 ##
 { 'event': 'BALLOON_CHANGE',
   'data': { 'actual': 'int' } }
+
+##
+# @AcpiTableOptions:
+#
+# Specify an ACPI table on the command line to load.
+#
+# At most one of @file and @data can be specified. The list of files specified
+# by any one of them is loaded and concatenated in order. If both are omitted,
+# @data is implied.
+#
+# Other fields / optargs can be used to override fields of the generic ACPI
+# table header; refer to the ACPI specification 5.0, section 5.2.6 System
+# Description Table Header. If a header field is not overridden, then the
+# corresponding value from the concatenated blob is used (in case of @file), or
+# it is filled in with a hard-coded value (in case of @data).
+#
+# String fields are copied into the matching ACPI member from lowest address
+# upwards, and silently truncated / NUL-padded to length.
+#
+# @sig: table signature / identifier (4 bytes)
+#
+# @rev: table revision number (dependent on signature, 1 byte)
+#
+# @oem_id: OEM identifier (6 bytes)
+#
+# @oem_table_id: OEM table identifier (8 bytes)
+#
+# @oem_rev: OEM-supplied revision number (4 bytes)
+#
+# @asl_compiler_id: identifier of the utility that created the table
+#                   (4 bytes)
+#
+# @asl_compiler_rev: revision number of the utility that created the
+#                    table (4 bytes)
+#
+# @file: colon (:) separated list of pathnames to load and
+#        concatenate as table data. The resultant binary blob is expected to
+#        have an ACPI table header. At least one file is required. This field
+#        excludes @data.
+#
+# @data: colon (:) separated list of pathnames to load and
+#        concatenate as table data. The resultant binary blob must not have an
+#        ACPI table header. At least one file is required. This field excludes
+#        @file.
+#
+# Since: 1.5
+##
+{ 'struct': 'AcpiTableOptions',
+  'data': {
+    '*sig':               'str',
+    '*rev':               'uint8',
+    '*oem_id':            'str',
+    '*oem_table_id':      'str',
+    '*oem_rev':           'uint32',
+    '*asl_compiler_id':   'str',
+    '*asl_compiler_rev':  'uint32',
+    '*file':              'str',
+    '*data':              'str' }}
+
+##
+# @MEM_UNPLUG_ERROR:
+#
+# Emitted when memory hot unplug error occurs.
+#
+# @device: device name
+#
+# @msg: Informative message
+#
+# Since: 2.4
+#
+# Example:
+#
+# <- { "event": "MEM_UNPLUG_ERROR"
+#      "data": { "device": "dimm1",
+#                "msg": "acpi: device unplug for unsupported device"
+#      },
+#      "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
+#
+##
+{ 'event': 'MEM_UNPLUG_ERROR',
+  'data': { 'device': 'str', 'msg': 'str' } }
+
+##
+# @ACPISlotType:
+#
+# @DIMM: memory slot
+# @CPU: logical CPU slot (since 2.7)
+##
+{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
+
+##
+# @ACPIOSTInfo:
+#
+# OSPM Status Indication for a device
+# For description of possible values of @source and @status fields
+# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
+#
+# @device: device ID associated with slot
+#
+# @slot: slot ID, unique per slot of a given @slot-type
+#
+# @slot-type: type of the slot
+#
+# @source: an integer containing the source event
+#
+# @status: an integer containing the status code
+#
+# Since: 2.1
+##
+{ 'struct': 'ACPIOSTInfo',
+  'data'  : { '*device': 'str',
+              'slot': 'str',
+              'slot-type': 'ACPISlotType',
+              'source': 'int',
+              'status': 'int' } }
+
+##
+# @query-acpi-ospm-status:
+#
+# Return a list of ACPIOSTInfo for devices that support status
+# reporting via ACPI _OST method.
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "query-acpi-ospm-status" }
+# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0},
+#                  { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0},
+#                  { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
+#                  { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
+#    ]}
+#
+##
+{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
+
+##
+# @ACPI_DEVICE_OST:
+#
+# Emitted when guest executes ACPI _OST method.
+#
+# @info: OSPM Status Indication
+#
+# Since: 2.1
+#
+# Example:
+#
+# <- { "event": "ACPI_DEVICE_OST",
+#      "data": { "device": "d1", "slot": "0",
+#                "slot-type": "DIMM", "source": 1, "status": 0 } }
+#
+##
+{ 'event': 'ACPI_DEVICE_OST',
+     'data': { 'info': 'ACPIOSTInfo' } }
qapi/misc.json +0 -154

166 lines not on this page · raw message

include/hw/acpi/acpi_dev_interface.h +1 -1
index a2a12af9b9..a1b63d51db 100644
@@ -1,7 +1,7 @@
 #ifndef ACPI_DEV_INTERFACE_H
 #define ACPI_DEV_INTERFACE_H
 
-#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-machine.h"
 #include "qom/object.h"
 #include "hw/boards.h"
 #include "hw/qdev-core.h"
hw/acpi/core.c +1 -1
index 45cbed49ab..4f8d90f50b 100644
@@ -27,7 +27,7 @@
 #include "qapi/error.h"
 #include "qapi/opts-visitor.h"
 #include "qapi/qapi-events-run-state.h"
-#include "qapi/qapi-visit-misc.h"
+#include "qapi/qapi-visit-machine.h"
 #include "qemu/error-report.h"
 #include "qemu/module.h"
 #include "qemu/option.h"
hw/acpi/cpu.c +1 -1
index e2c957ce00..8be15db96d 100644
@@ -3,7 +3,7 @@
 #include "migration/vmstate.h"
 #include "hw/acpi/cpu.h"
 #include "qapi/error.h"
-#include "qapi/qapi-events-misc.h"
+#include "qapi/qapi-events-machine.h"
 #include "trace.h"
 #include "sysemu/numa.h"
 
hw/acpi/memory_hotplug.c +1 -1
index 8d2e82240f..aa454f5cb2 100644
@@ -7,7 +7,7 @@
 #include "migration/vmstate.h"
 #include "trace.h"
 #include "qapi/error.h"
-#include "qapi/qapi-events-misc.h"
+#include "qapi/qapi-events-machine.h"
 
 #define MEMORY_SLOTS_NUMBER          "MDNR"
 #define MEMORY_HOTPLUG_IO_REGION     "HPMR"
Signature · 1 line
2.21.1
#11 lore raw

PATCH 8/9 qapi/misc: Restrict PCI commands to machine code

In reply to Philippe Mathieu-Daudé
---
 qapi/machine.json | 304 ++++++++++++++++++++++++++++++++++++++++++++++
 qapi/misc.json    | 304 ----------------------------------------------
 hw/pci/pci-stub.c |   2 +-
 hw/pci/pci.c      |   2 +-
 4 files changed, 306 insertions(+), 306 deletions(-)
qapi/machine.json +304 -0
index f77ee63730..33b259dbd0 100644
@@ -1172,3 +1172,307 @@
 ##
 { 'event': 'ACPI_DEVICE_OST',
      'data': { 'info': 'ACPIOSTInfo' } }
+
+##
+# @PciMemoryRange:
+#
+# A PCI device memory region
+#
+# @base: the starting address (guest physical)
+#
+# @limit: the ending address (guest physical)
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} }
+
+##
+# @PciMemoryRegion:
+#
+# Information about a PCI device I/O region.
+#
+# @bar: the index of the Base Address Register for this region
+#
+# @type: - 'io' if the region is a PIO region
+#        - 'memory' if the region is a MMIO region
+#
+# @size: memory size
+#
+# @prefetch: if @type is 'memory', true if the memory is prefetchable
+#
+# @mem_type_64: if @type is 'memory', true if the BAR is 64-bit
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciMemoryRegion',
+  'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int',
+           '*prefetch': 'bool', '*mem_type_64': 'bool' } }
+
+##
+# @PciBusInfo:
+#
+# Information about a bus of a PCI Bridge device
+#
+# @number: primary bus interface number.  This should be the number of the
+#          bus the device resides on.
+#
+# @secondary: secondary bus interface number.  This is the number of the
+#             main bus for the bridge
+#
+# @subordinate: This is the highest number bus that resides below the
+#               bridge.
+#
+# @io_range: The PIO range for all devices on this bridge
+#
+# @memory_range: The MMIO range for all devices on this bridge
+#
+# @prefetchable_range: The range of prefetchable MMIO for all devices on
+#                      this bridge
+#
+# Since: 2.4
+##
+{ 'struct': 'PciBusInfo',
+  'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int',
+           'io_range': 'PciMemoryRange',
+           'memory_range': 'PciMemoryRange',
+           'prefetchable_range': 'PciMemoryRange' } }
+
+##
+# @PciBridgeInfo:
+#
+# Information about a PCI Bridge device
+#
+# @bus: information about the bus the device resides on
+#
+# @devices: a list of @PciDeviceInfo for each device on this bridge
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciBridgeInfo',
+  'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} }
+
+##
+# @PciDeviceClass:
+#
+# Information about the Class of a PCI device
+#
+# @desc: a string description of the device's class
+#
+# @class: the class code of the device
+#
+# Since: 2.4
+##
+{ 'struct': 'PciDeviceClass',
+  'data': {'*desc': 'str', 'class': 'int'} }
+
+##
+# @PciDeviceId:
+#
+# Information about the Id of a PCI device
+#
+# @device: the PCI device id
+#
+# @vendor: the PCI vendor id
+#
+# @subsystem: the PCI subsystem id (since 3.1)
+#
+# @subsystem-vendor: the PCI subsystem vendor id (since 3.1)
+#
+# Since: 2.4
+##
+{ 'struct': 'PciDeviceId',
+  'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int',
+            '*subsystem-vendor': 'int'} }
+
+##
+# @PciDeviceInfo:
+#
+# Information about a PCI device
+#
+# @bus: the bus number of the device
+#
+# @slot: the slot the device is located in
+#
+# @function: the function of the slot used by the device
+#
+# @class_info: the class of the device
+#
+# @id: the PCI device id
+#
+# @irq: if an IRQ is assigned to the device, the IRQ number
+#
+# @qdev_id: the device name of the PCI device
+#
+# @pci_bridge: if the device is a PCI bridge, the bridge information
+#
+# @regions: a list of the PCI I/O regions associated with the device
+#
+# Notes: the contents of @class_info.desc are not stable and should only be
+#        treated as informational.
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciDeviceInfo',
+  'data': {'bus': 'int', 'slot': 'int', 'function': 'int',
+           'class_info': 'PciDeviceClass', 'id': 'PciDeviceId',
+           '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo',
+           'regions': ['PciMemoryRegion']} }
+
+##
+# @PciInfo:
+#
+# Information about a PCI bus
+#
+# @bus: the bus index
+#
+# @devices: a list of devices on this bus
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} }
+
+##
+# @query-pci:
+#
+# Return information about the PCI bus topology of the guest.
+#
+# Returns: a list of @PciInfo for each PCI bus. Each bus is
+#          represented by a json-object, which has a key with a json-array of
+#          all PCI devices attached to it. Each device is represented by a
+#          json-object.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-pci" }
+# <- { "return": [
+#          {
+#             "bus": 0,
+#             "devices": [
+#                {
+#                   "bus": 0,
+#                   "qdev_id": "",
+#                   "slot": 0,
+#                   "class_info": {
+#                      "class": 1536,
+#                      "desc": "Host bridge"
+#                   },
+#                   "id": {
+#                      "device": 32902,
+#                      "vendor": 4663
+#                   },
+#                   "function": 0,
+#                   "regions": [
+#                   ]
+#                },
+#                {
+#                   "bus": 0,
+#                   "qdev_id": "",
+#                   "slot": 1,
+#                   "class_info": {
+#                      "class": 1537,
+#                      "desc": "ISA bridge"
+#                   },
+#                   "id": {
+#                      "device": 32902,
+#                      "vendor": 28672
+#                   },
+#                   "function": 0,
+#                   "regions": [
+#                   ]
+#                },
+#                {
+#                   "bus": 0,
+#                   "qdev_id": "",
+#                   "slot": 1,
+#                   "class_info": {
+#                      "class": 257,
+#                      "desc": "IDE controller"
+#                   },
+#                   "id": {
+#                      "device": 32902,
+#                      "vendor": 28688
+#                   },
+#                   "function": 1,
+#                   "regions": [
+#                      {
+#                         "bar": 4,
+#                         "size": 16,
+#                         "address": 49152,
+#                         "type": "io"
+#                      }
+#                   ]
+#                },
+#                {
+#                   "bus": 0,
+#                   "qdev_id": "",
+#                   "slot": 2,
+#                   "class_info": {
+#                      "class": 768,
+#                      "desc": "VGA controller"
+#                   },
+#                   "id": {
+#                      "device": 4115,
+#                      "vendor": 184
+#                   },
+#                   "function": 0,
+#                   "regions": [
+#                      {
+#                         "prefetch": true,
+#                         "mem_type_64": false,
+#                         "bar": 0,
+#                         "size": 33554432,
+#                         "address": 4026531840,
+#                         "type": "memory"
+#                      },
+#                      {
+#                         "prefetch": false,
+#                         "mem_type_64": false,
+#                         "bar": 1,
+#                         "size": 4096,
+#                         "address": 4060086272,
+#                         "type": "memory"
+#                      },
+#                      {
+#                         "prefetch": false,
+#                         "mem_type_64": false,
+#                         "bar": 6,
+#                         "size": 65536,
+#                         "address": -1,
+#                         "type": "memory"
+#                      }
+#                   ]
+#                },
+#                {
+#                   "bus": 0,
+#                   "qdev_id": "",
+#                   "irq": 11,
+#                   "slot": 4,
+#                   "class_info": {
+#                      "class": 1280,
+#                      "desc": "RAM controller"
+#                   },
+#                   "id": {
+#                      "device": 6900,
+#                      "vendor": 4098
+#                   },
+#                   "function": 0,
+#                   "regions": [
+#                      {
+#                         "bar": 0,
+#                         "size": 32,
+#                         "address": 49280,
+#                         "type": "io"
+#                      }
+#                   ]
+#                }
+#             ]
+#          }
+#       ]
+#    }
+#
+# Note: This example has been shortened as the real response is too long.
+#
+##
+{ 'command': 'query-pci', 'returns': ['PciInfo'] }
qapi/misc.json +0 -304

310 lines not on this page · raw message

hw/pci/pci-stub.c +1 -1
index cc2a2e1f73..b50c7ca590 100644
@@ -22,7 +22,7 @@
 #include "sysemu/sysemu.h"
 #include "monitor/monitor.h"
 #include "qapi/error.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-machine.h"
 #include "qapi/qmp/qerror.h"
 #include "hw/pci/pci.h"
 #include "hw/pci/msi.h"
hw/pci/pci.c +1 -1
index e1ed6677e1..5ebc783d57 100644
@@ -46,7 +46,7 @@
 #include "hw/hotplug.h"
 #include "hw/boards.h"
 #include "qapi/error.h"
-#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-machine.h"
 #include "qemu/cutils.h"
 
 //#define DEBUG_PCI
Signature · 1 line
2.21.1
#12 lore raw

PATCH 9/9 qapi/misc: Restrict device memory commands to machine code

In reply to Philippe Mathieu-Daudé
---
 qapi/machine.json               | 131 +++++++++++++++++++++++++++++++
 qapi/misc.json                  | 132 --------------------------------
 include/hw/mem/memory-device.h  |   1 +
 include/hw/virtio/virtio-pmem.h |   2 +-
 4 files changed, 133 insertions(+), 133 deletions(-)
qapi/machine.json +131 -0
index 33b259dbd0..17ccebda14 100644
@@ -1476,3 +1476,134 @@
 #
 ##
 { 'command': 'query-pci', 'returns': ['PciInfo'] }
+
+##
+# @MemoryInfo:
+#
+# Actual memory information in bytes.
+#
+# @base-memory: size of "base" memory specified with command line
+#               option -m.
+#
+# @plugged-memory: size of memory that can be hot-unplugged. This field
+#                  is omitted if target doesn't support memory hotplug
+#                  (i.e. CONFIG_MEM_DEVICE not defined at build time).
+#
+# Since: 2.11.0
+##
+{ 'struct': 'MemoryInfo',
+  'data'  : { 'base-memory': 'size', '*plugged-memory': 'size' } }
+
+##
+# @query-memory-size-summary:
+#
+# Return the amount of initially allocated and present hotpluggable (if
+# enabled) memory in bytes.
+#
+# Example:
+#
+# -> { "execute": "query-memory-size-summary" }
+# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } }
+#
+# Since: 2.11.0
+##
+{ 'command': 'query-memory-size-summary', 'returns': 'MemoryInfo' }
+
+##
+# @PCDIMMDeviceInfo:
+#
+# PCDIMMDevice state information
+#
+# @id: device's ID
+#
+# @addr: physical address, where device is mapped
+#
+# @size: size of memory that the device provides
+#
+# @slot: slot number at which device is plugged in
+#
+# @node: NUMA node number where device is plugged in
+#
+# @memdev: memory backend linked with device
+#
+# @hotplugged: true if device was hotplugged
+#
+# @hotpluggable: true if device if could be added/removed while machine is running
+#
+# Since: 2.1
+##
+{ 'struct': 'PCDIMMDeviceInfo',
+  'data': { '*id': 'str',
+            'addr': 'int',
+            'size': 'int',
+            'slot': 'int',
+            'node': 'int',
+            'memdev': 'str',
+            'hotplugged': 'bool',
+            'hotpluggable': 'bool'
+          }
+}
+
+##
+# @VirtioPMEMDeviceInfo:
+#
+# VirtioPMEM state information
+#
+# @id: device's ID
+#
+# @memaddr: physical address in memory, where device is mapped
+#
+# @size: size of memory that the device provides
+#
+# @memdev: memory backend linked with device
+#
+# Since: 4.1
+##
+{ 'struct': 'VirtioPMEMDeviceInfo',
+  'data': { '*id': 'str',
+            'memaddr': 'size',
+            'size': 'size',
+            'memdev': 'str'
+          }
+}
+
+##
+# @MemoryDeviceInfo:
+#
+# Union containing information about a memory device
+#
+# nvdimm is included since 2.12. virtio-pmem is included since 4.1.
+#
+# Since: 2.1
+##
+{ 'union': 'MemoryDeviceInfo',
+  'data': { 'dimm': 'PCDIMMDeviceInfo',
+            'nvdimm': 'PCDIMMDeviceInfo',
+            'virtio-pmem': 'VirtioPMEMDeviceInfo'
+          }
+}
+
+##
+# @query-memory-devices:
+#
+# Lists available memory devices and their state
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "query-memory-devices" }
+# <- { "return": [ { "data":
+#                       { "addr": 5368709120,
+#                         "hotpluggable": true,
+#                         "hotplugged": true,
+#                         "id": "d1",
+#                         "memdev": "/objects/memX",
+#                         "node": 0,
+#                         "size": 1073741824,
+#                         "slot": 0},
+#                    "type": "dimm"
+#                  } ] }
+#
+##
+{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
qapi/misc.json +0 -132

144 lines not on this page · raw message

include/hw/mem/memory-device.h +1 -0
index 04476acb8f..76f3de0f7e 100644
@@ -14,6 +14,7 @@
 #define MEMORY_DEVICE_H
 
 #include "hw/qdev-core.h"
+#include "qapi/qapi-types-machine.h"
 #include "qapi/qapi-types-misc.h"
 #include "qom/object.h"
 
include/hw/virtio/virtio-pmem.h +1 -1
index 33f1999320..72863412b2 100644
@@ -15,7 +15,7 @@
 #define HW_VIRTIO_PMEM_H
 
 #include "hw/virtio/virtio.h"
-#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-machine.h"
 
 #define TYPE_VIRTIO_PMEM "virtio-pmem"
 
Signature · 1 line
2.21.1
#13 lore raw
In reply to Philippe Mathieu-Daudé
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===

LINK qemu-img
/usr/bin/ld: qapi/qapi-commands-char.o: in function `qmp_marshal_add_client':
/tmp/qemu-test/build/qapi/qapi-commands-char.c:404: undefined reference to `qmp_add_client'
clang-8: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [/tmp/qemu-test/src/rules.mak:124: qemu-storage-daemon] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
File "./tests/docker/docker.py", line 664, in <module>
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=51e14086532c419b93bbc70aaa6062a4', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=x86_64-softmmu', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-_4qqozfd/src/docker-src.2020-03-13-17.10.10.8098:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-debug']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=51e14086532c419b93bbc70aaa6062a4
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-_4qqozfd/src'
make: *** [docker-run-test-debug@fedora] Error 2

real 4m17.682s
user 0m8.190s

The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

#14 lore raw
In reply to Philippe Mathieu-Daudé
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1 === TEST SCRIPT END ===

LINK vhost-user-input
qapi/qapi-commands-char.o: In function `qmp_marshal_add_client':
/tmp/qemu-test/build/qapi/qapi-commands-char.c:404: undefined reference to `qmp_add_client'
collect2: error: ld returned 1 exit status
make: *** [qemu-storage-daemon] Error 1
make: *** Waiting for unfinished jobs....
GEN x86_64-softmmu/config-target.h
GEN x86_64-softmmu/hmp-commands.h
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=79fd3dced38c4a66beb52a21af5ece9a', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-eu33v9p1/src/docker-src.2020-03-13-17.16.06.18800:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=79fd3dced38c4a66beb52a21af5ece9a
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-eu33v9p1/src'
make: *** [docker-run-test-quick@centos7] Error 2

real 3m28.886s
user 0m8.592s

The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]