user-mode: Prune build dependencies (part 2)
PATCH 1/9 target/i386: Restrict X86CPUFeatureWord to X86 targets
In reply to Philippe Mathieu-DaudéMove out x86-specific structures from generic machine code.
--- qapi/machine-target.json | 45 ++++++++++++++++++++++++++++++++++++++ qapi/machine.json | 42 ----------------------------------- target/i386/cpu.c | 2 +- target/i386/machine-stub.c | 22 +++++++++++++++++++ target/i386/Makefile.objs | 3 ++- 5 files changed, 70 insertions(+), 44 deletions(-) create mode 100644 target/i386/machine-stub.c
qapi/machine-target.json +45 -0
@@ -3,6 +3,51 @@ # This work is licensed under the terms of the GNU GPL, version 2 or later. # See the COPYING file in the top-level directory. +## +# @X86CPURegister32: +# +# A X86 32-bit register +# +# Since: 1.5 +## +{ 'enum': 'X86CPURegister32', + 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ], + 'if': 'defined(TARGET_I386)' } + +## +# @X86CPUFeatureWordInfo: +# +# Information about a X86 CPU feature word +# +# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word +# +# @cpuid-input-ecx: Input ECX value for CPUID instruction for that +# feature word +# +# @cpuid-register: Output register containing the feature bits +# +# @features: value of output register, containing the feature bits +# +# Since: 1.5 +## +{ 'struct': 'X86CPUFeatureWordInfo', + 'data': { 'cpuid-input-eax': 'int', + '*cpuid-input-ecx': 'int', + 'cpuid-register': 'X86CPURegister32', + 'features': 'int' }, + 'if': 'defined(TARGET_I386)' } + +## +# @DummyForceArrays: +# +# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally +# +# Since: 2.5 +## +{ 'struct': 'DummyForceArrays', + 'data': { 'unused': ['X86CPUFeatureWordInfo'] }, + 'if': 'defined(TARGET_I386)' } + ## # @CpuModelInfo: #
qapi/machine.json +0 -42
48 lines not on this page · raw message
target/i386/cpu.c +1 -1
@@ -37,7 +37,7 @@#include "qemu/option.h" #include "qemu/config-file.h" #include "qapi/error.h" -#include "qapi/qapi-visit-machine.h" +#include "qapi/qapi-visit-machine-target.h" #include "qapi/qapi-visit-run-state.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qerror.h"
target/i386/machine-stub.c new file +22 -0
@@ -0,0 +1,22 @@ +/* +* QAPI x86 CPU features stub +* +* Copyright (c) 2020 Red Hat, Inc. +* +* Author: +* Philippe Mathieu-Daudé <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qapi/qapi-visit-machine-target.h" + +void visit_type_X86CPUFeatureWordInfoList (Visitor *v,const char *name, +X86CPUFeatureWordInfoList **obj, +Error **errp) +{ +}
target/i386/Makefile.objs +2 -1
@@ -17,6 +17,7 @@ obj-$(CONFIG_HAX) += hax-all.o hax-mem.o hax-posix.o endif obj-$(CONFIG_HVF) += hvf/ obj-$(CONFIG_WHPX) += whpx-all.o -endif +endif # CONFIG_SOFTMMU obj-$(CONFIG_SEV) += sev.o obj-$(call lnot,$(CONFIG_SEV)) += sev-stub.o +obj-$(call lnot,$(CONFIG_SOFTMMU)) += machine-stub.o
Signature · 1 line
2.21.1
PATCH 5/9 qapi/misc: Move query-uuid command with block code
In reply to Philippe Mathieu-Daudé--- qapi/block-core.json | 30 ++++++++++++++++++++++++++++++ qapi/misc.json | 30 ------------------------------ block/iscsi.c | 2 +- stubs/uuid.c | 2 +- 4 files changed, 32 insertions(+), 32 deletions(-)
qapi/block-core.json +30 -0
@@ -5415,3 +5415,33 @@ { 'command': 'blockdev-snapshot-delete-internal-sync', 'data': { 'device': 'str', '*id': 'str', '*name': 'str'}, 'returns': 'SnapshotInfo' } + +## +# @UuidInfo: +# +# Guest UUID information (Universally Unique Identifier). +# +# @UUID: the UUID of the guest +# +# Since: 0.14.0 +# +# Notes: If no UUID was specified for the guest, a null UUID is returned. +## +{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} } + +## +# @query-uuid: +# +# Query the guest UUID information. +# +# Returns: The @UuidInfo for the guest +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-uuid" } +# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } +# +## +{ 'command': 'query-uuid', 'returns': 'UuidInfo', 'allow-preconfig': true }
qapi/misc.json +0 -30
@@ -65,36 +65,6 @@ ## { 'command': 'query-kvm', 'returns': 'KvmInfo' } -## -# @UuidInfo: -# -# Guest UUID information (Universally Unique Identifier). -# -# @UUID: the UUID of the guest -# -# Since: 0.14.0 -# -# Notes: If no UUID was specified for the guest, a null UUID is returned. -## -{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} } - -## -# @query-uuid: -# -# Query the guest UUID information. -# -# Returns: The @UuidInfo for the guest -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-uuid" } -# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } -# -## -{ 'command': 'query-uuid', 'returns': 'UuidInfo', 'allow-preconfig': true } - ## # @IOThreadInfo: #
block/iscsi.c +1 -1
@@ -42,7 +42,7 @@#include "qemu/uuid.h" #include "sysemu/replay.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-block-core.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qstring.h" #include "crypto/secret.h"
stubs/uuid.c +1 -1
@@ -1,5 +1,5 @@#include "qemu/osdep.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-block-core.h" #include "qemu/uuid.h" UuidInfo *qmp_query_uuid (Error **errp)
Signature · 1 line
2.21.1
cover user-mode: Prune build dependencies (part 2)
This is the second part of a series reducing user-mode dependencies. By stripping out unused code, the build and testing time is reduced (as is space used by objects).
Part 2:
- Extract code not related to user-mode from qapi/misc.json
Based-on: <[email protected]>
Philippe Mathieu-Daudé (9):
target/i386: Restrict X86CPUFeatureWord to X86 targets qapi/misc: Move add_client command with chardev code qapi/misc: Restrict LostTickPolicy enum to machine code qapi/misc: Restrict balloon-related commands to machine code qapi/misc: Move query-uuid command with block code qapi/misc: Restrict query-vm-generation-id command to machine code qapi/misc: Restrict ACPI commands to machine code qapi/misc: Restrict PCI commands to machine code qapi/misc: Restrict device memory commands to machine code
qapi/block-core.json | 30 + qapi/char.json | 32 ++ qapi/machine-target.json | 45 ++ qapi/machine.json | 766 ++++++++++++++++++++++++-- qapi/misc.json | 788 --------------------------- include/hw/acpi/acpi_dev_interface.h | 2 +- include/hw/mem/memory-device.h | 1 + include/hw/rtc/mc146818rtc.h | 2 +- include/hw/virtio/virtio-pmem.h | 2 +- include/sysemu/balloon.h | 2 +- balloon.c | 2 +- block/iscsi.c | 2 +- hw/acpi/core.c | 2 +- hw/acpi/cpu.c | 2 +- hw/acpi/memory_hotplug.c | 2 +- hw/acpi/vmgenid.c | 2 +- hw/core/qdev-properties.c | 1 + hw/i386/kvm/i8254.c | 2 +- hw/pci/pci-stub.c | 2 +- hw/pci/pci.c | 2 +- hw/virtio/virtio-balloon.c | 2 +- monitor/hmp-cmds.c | 1 + monitor/qmp-cmds.c | 1 + stubs/uuid.c | 2 +- stubs/vmgenid.c | 2 +- target/i386/cpu.c | 2 +- target/i386/machine-stub.c | 22 + target/i386/Makefile.objs | 3 +- 28 files changed, 876 insertions(+), 848 deletions(-) create mode 100644 target/i386/machine-stub.c
Signature · 1 line
2.21.1
PATCH 3/9 qapi/misc: Restrict LostTickPolicy enum to machine code
--- qapi/machine.json | 32 ++++++++++++++++++++++++++++++++ qapi/misc.json | 32 -------------------------------- include/hw/rtc/mc146818rtc.h | 2 +- hw/core/qdev-properties.c | 1 + hw/i386/kvm/i8254.c | 2 +- 5 files changed, 35 insertions(+), 34 deletions(-)
qapi/machine.json +32 -0
@@ -415,6 +415,38 @@ ## { 'command': 'query-target', 'returns': 'TargetInfo' } +## +# @LostTickPolicy: +# +# Policy for handling lost ticks in timer devices. Ticks end up getting +# lost when, for example, the guest is paused. +# +# @discard: throw away the missed ticks and continue with future injection +# normally. The guest OS will see the timer jump ahead by a +# potentially quite significant amount all at once, as if the +# intervening chunk of time had simply not existed; needless to +# say, such a sudden jump can easily confuse a guest OS which is +# not specifically prepared to deal with it. Assuming the guest +# OS can deal correctly with the time jump, the time in the guest +# and in the host should now match. +# +# @delay: continue to deliver ticks at the normal rate. The guest OS will +# not notice anything is amiss, as from its point of view time will +# have continued to flow normally. The time in the guest should now +# be behind the time in the host by exactly the amount of time during +# which ticks have been missed. +# +# @slew: deliver ticks at a higher rate to catch up with the missed ticks. +# The guest OS will not notice anything is amiss, as from its point +# of view time will have continued to flow normally. Once the timer +# has managed to catch up with all the missing ticks, the time in +# the guest and in the host should match. +# +# Since: 2.0 +## +{ 'enum': 'LostTickPolicy', + 'data': ['discard', 'delay', 'slew' ] } + ## # @NumaOptionsType: #
qapi/misc.json +0 -32
@@ -7,38 +7,6 @@ { 'include': 'common.json' } -## -# @LostTickPolicy: -# -# Policy for handling lost ticks in timer devices. Ticks end up getting -# lost when, for example, the guest is paused. -# -# @discard: throw away the missed ticks and continue with future injection -# normally. The guest OS will see the timer jump ahead by a -# potentially quite significant amount all at once, as if the -# intervening chunk of time had simply not existed; needless to -# say, such a sudden jump can easily confuse a guest OS which is -# not specifically prepared to deal with it. Assuming the guest -# OS can deal correctly with the time jump, the time in the guest -# and in the host should now match. -# -# @delay: continue to deliver ticks at the normal rate. The guest OS will -# not notice anything is amiss, as from its point of view time will -# have continued to flow normally. The time in the guest should now -# be behind the time in the host by exactly the amount of time during -# which ticks have been missed. -# -# @slew: deliver ticks at a higher rate to catch up with the missed ticks. -# The guest OS will not notice anything is amiss, as from its point -# of view time will have continued to flow normally. Once the timer -# has managed to catch up with all the missing ticks, the time in -# the guest and in the host should match. -# -# Since: 2.0 -## -{ 'enum': 'LostTickPolicy', - 'data': ['discard', 'delay', 'slew' ] } - ## # @NameInfo: #
include/hw/rtc/mc146818rtc.h +1 -1
@@ -9,7 +9,7 @@#ifndef HW_RTC_MC146818RTC_H #define HW_RTC_MC146818RTC_H -#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-machine.h" #include "qemu/queue.h" #include "qemu/timer.h" #include "hw/isa/isa.h"
hw/core/qdev-properties.c +1 -0
@@ -4,6 +4,7 @@#include "qapi/error.h" #include "hw/pci/pci.h" #include "qapi/qapi-types-block.h" +#include "qapi/qapi-types-machine.h" #include "qapi/qapi-types-misc.h" #include "qapi/qmp/qerror.h" #include "qemu/ctype.h"
hw/i386/kvm/i8254.c +1 -1
@@ -25,7 +25,7 @@#include "qemu/osdep.h" #include <linux/kvm.h> -#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-machine.h" #include "qapi/error.h" #include "qemu/module.h" #include "qemu/timer.h"
Signature · 1 line
2.21.1
PATCH 2/9 qapi/misc: Move add_client command with chardev code
In reply to Philippe Mathieu-Daudé--- qapi/char.json | 32 ++++++++++++++++++++++++++++++++ qapi/misc.json | 32 -------------------------------- monitor/qmp-cmds.c | 1 + 3 files changed, 33 insertions(+), 32 deletions(-)
qapi/char.json +32 -0
@@ -572,3 +572,35 @@ { 'event': 'VSERPORT_CHANGE', 'data': { 'id': 'str', 'open': 'bool' } } + +## +# @add_client: +# +# Allow client connections for VNC, Spice and socket based +# character devices to be passed in to QEMU via SCM_RIGHTS. +# +# @protocol: protocol name. Valid names are "vnc", "spice" or the +# name of a character device (eg. from -chardev id=XXXX) +# +# @fdname: file descriptor name previously passed via 'getfd' command +# +# @skipauth: whether to skip authentication. Only applies +# to "vnc" and "spice" protocols +# +# @tls: whether to perform TLS. Only applies to the "spice" +# protocol +# +# Returns: nothing on success. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "add_client", "arguments": { "protocol": "vnc", +# "fdname": "myclient" } } +# <- { "return": {} } +# +## +{ 'command': 'add_client', + 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', + '*tls': 'bool' } }
qapi/misc.json +0 -32
@@ -39,38 +39,6 @@ { 'enum': 'LostTickPolicy', 'data': ['discard', 'delay', 'slew' ] } -## -# @add_client: -# -# Allow client connections for VNC, Spice and socket based -# character devices to be passed in to QEMU via SCM_RIGHTS. -# -# @protocol: protocol name. Valid names are "vnc", "spice" or the -# name of a character device (eg. from -chardev id=XXXX) -# -# @fdname: file descriptor name previously passed via 'getfd' command -# -# @skipauth: whether to skip authentication. Only applies -# to "vnc" and "spice" protocols -# -# @tls: whether to perform TLS. Only applies to the "spice" -# protocol -# -# Returns: nothing on success. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "add_client", "arguments": { "protocol": "vnc", -# "fdname": "myclient" } } -# <- { "return": {} } -# -## -{ 'command': 'add_client', - 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', - '*tls': 'bool' } } - ## # @NameInfo: #
monitor/qmp-cmds.c +1 -0
@@ -31,6 +31,7 @@#include "sysemu/block-backend.h" #include "qapi/error.h" #include "qapi/qapi-commands-block.h" +#include "qapi/qapi-commands-char.h" #include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h"
Signature · 1 line
2.21.1
PATCH 4/9 qapi/misc: Restrict balloon-related commands to machine code
In reply to Philippe Mathieu-Daudé--- qapi/machine.json | 83 ++++++++++++++++++++++++++++++++++++++ qapi/misc.json | 83 -------------------------------------- include/sysemu/balloon.h | 2 +- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 2 +- monitor/hmp-cmds.c | 1 + 6 files changed, 87 insertions(+), 86 deletions(-)
qapi/machine.json +83 -0
@@ -915,3 +915,86 @@ 'data': 'NumaOptions', 'allow-preconfig': true } + +## +# @balloon: +# +# Request the balloon driver to change its balloon size. +# +# @value: the target size of the balloon in bytes +# +# Returns: - Nothing on success +# - If the balloon driver is enabled but not functional because the KVM +# kernel module cannot support it, KvmMissingCap +# - If no balloon device is present, DeviceNotActive +# +# Notes: This command just issues a request to the guest. When it returns, +# the balloon size may not have changed. A guest can change the balloon +# size independent of this command. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "balloon", "arguments": { "value": 536870912 } } +# <- { "return": {} } +# +## +{ 'command': 'balloon', 'data': {'value': 'int'} } + +## +# @BalloonInfo: +# +# Information about the guest balloon device. +# +# @actual: the number of bytes the balloon currently contains +# +# Since: 0.14.0 +# +## +{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } } + +## +# @query-balloon: +# +# Return information about the balloon device. +# +# Returns: - @BalloonInfo on success +# - If the balloon driver is enabled but not functional because the KVM +# kernel module cannot support it, KvmMissingCap +# - If no balloon device is present, DeviceNotActive +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-balloon" } +# <- { "return": { +# "actual": 1073741824, +# } +# } +# +## +{ 'command': 'query-balloon', 'returns': 'BalloonInfo' } + +## +# @BALLOON_CHANGE: +# +# Emitted when the guest changes the actual BALLOON level. This value is +# equivalent to the @actual field return by the 'query-balloon' command +# +# @actual: actual level of the guest memory balloon in bytes +# +# Note: this event is rate-limited. +# +# Since: 1.2 +# +# Example: +# +# <- { "event": "BALLOON_CHANGE", +# "data": { "actual": 944766976 }, +# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } +# +## +{ 'event': 'BALLOON_CHANGE', + 'data': { 'actual': 'int' } }
qapi/misc.json +0 -83
95 lines not on this page · raw message
include/sysemu/balloon.h +1 -1
@@ -15,7 +15,7 @@#define QEMU_BALLOON_H #include "exec/cpu-common.h" -#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-machine.h" typedef void (QEMUBalloonEvent )(void *opaque,ram_addr_t target);typedef void (QEMUBalloonStatus )(void *opaque,BalloonInfo *info);
balloon.c +1 -1
@@ -30,7 +30,7 @@#include "sysemu/balloon.h" #include "trace-root.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-machine.h" #include "qapi/qmp/qerror.h" static QEMUBalloonEvent *balloon_event_fn;
hw/virtio/virtio-balloon.c +1 -1
@@ -24,7 +24,7 @@#include "hw/virtio/virtio-balloon.h" #include "exec/address-spaces.h" #include "qapi/error.h" -#include "qapi/qapi-events-misc.h" +#include "qapi/qapi-events-machine.h" #include "qapi/visitor.h" #include "trace.h" #include "qemu/error-report.h"
monitor/hmp-cmds.c +1 -0
@@ -32,6 +32,7 @@#include "qapi/qapi-commands-block.h" #include "qapi/qapi-commands-char.h" #include "qapi/qapi-commands-control.h" +#include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-commands-misc.h" #include "qapi/qapi-commands-net.h"
Signature · 1 line
2.21.1
PATCH 9/9 qapi/misc: Restrict device memory commands to machine code
In reply to Philippe Mathieu-Daudé--- qapi/machine.json | 131 +++++++++++++++++++++++++++++++ qapi/misc.json | 132 -------------------------------- include/hw/mem/memory-device.h | 1 + include/hw/virtio/virtio-pmem.h | 2 +- 4 files changed, 133 insertions(+), 133 deletions(-)
qapi/machine.json +131 -0
@@ -1476,3 +1476,134 @@ # ## { 'command': 'query-pci', 'returns': ['PciInfo'] } + +## +# @MemoryInfo: +# +# Actual memory information in bytes. +# +# @base-memory: size of "base" memory specified with command line +# option -m. +# +# @plugged-memory: size of memory that can be hot-unplugged. This field +# is omitted if target doesn't support memory hotplug +# (i.e. CONFIG_MEM_DEVICE not defined at build time). +# +# Since: 2.11.0 +## +{ 'struct': 'MemoryInfo', + 'data' : { 'base-memory': 'size', '*plugged-memory': 'size' } } + +## +# @query-memory-size-summary: +# +# Return the amount of initially allocated and present hotpluggable (if +# enabled) memory in bytes. +# +# Example: +# +# -> { "execute": "query-memory-size-summary" } +# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } } +# +# Since: 2.11.0 +## +{ 'command': 'query-memory-size-summary', 'returns': 'MemoryInfo' } + +## +# @PCDIMMDeviceInfo: +# +# PCDIMMDevice state information +# +# @id: device's ID +# +# @addr: physical address, where device is mapped +# +# @size: size of memory that the device provides +# +# @slot: slot number at which device is plugged in +# +# @node: NUMA node number where device is plugged in +# +# @memdev: memory backend linked with device +# +# @hotplugged: true if device was hotplugged +# +# @hotpluggable: true if device if could be added/removed while machine is running +# +# Since: 2.1 +## +{ 'struct': 'PCDIMMDeviceInfo', + 'data': { '*id': 'str', + 'addr': 'int', + 'size': 'int', + 'slot': 'int', + 'node': 'int', + 'memdev': 'str', + 'hotplugged': 'bool', + 'hotpluggable': 'bool' + } +} + +## +# @VirtioPMEMDeviceInfo: +# +# VirtioPMEM state information +# +# @id: device's ID +# +# @memaddr: physical address in memory, where device is mapped +# +# @size: size of memory that the device provides +# +# @memdev: memory backend linked with device +# +# Since: 4.1 +## +{ 'struct': 'VirtioPMEMDeviceInfo', + 'data': { '*id': 'str', + 'memaddr': 'size', + 'size': 'size', + 'memdev': 'str' + } +} + +## +# @MemoryDeviceInfo: +# +# Union containing information about a memory device +# +# nvdimm is included since 2.12. virtio-pmem is included since 4.1. +# +# Since: 2.1 +## +{ 'union': 'MemoryDeviceInfo', + 'data': { 'dimm': 'PCDIMMDeviceInfo', + 'nvdimm': 'PCDIMMDeviceInfo', + 'virtio-pmem': 'VirtioPMEMDeviceInfo' + } +} + +## +# @query-memory-devices: +# +# Lists available memory devices and their state +# +# Since: 2.1 +# +# Example: +# +# -> { "execute": "query-memory-devices" } +# <- { "return": [ { "data": +# { "addr": 5368709120, +# "hotpluggable": true, +# "hotplugged": true, +# "id": "d1", +# "memdev": "/objects/memX", +# "node": 0, +# "size": 1073741824, +# "slot": 0}, +# "type": "dimm" +# } ] } +# +## +{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
qapi/misc.json +0 -132
144 lines not on this page · raw message
include/hw/mem/memory-device.h +1 -0
@@ -14,6 +14,7 @@#define MEMORY_DEVICE_H #include "hw/qdev-core.h" +#include "qapi/qapi-types-machine.h" #include "qapi/qapi-types-misc.h" #include "qom/object.h"
include/hw/virtio/virtio-pmem.h +1 -1
@@ -15,7 +15,7 @@#define HW_VIRTIO_PMEM_H #include "hw/virtio/virtio.h" -#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-machine.h" #define TYPE_VIRTIO_PMEM "virtio-pmem"
Signature · 1 line
2.21.1
PATCH 7/9 qapi/misc: Restrict ACPI commands to machine code
In reply to Philippe Mathieu-Daudé--- qapi/machine.json | 154 +++++++++++++++++++++++++++ qapi/misc.json | 154 --------------------------- include/hw/acpi/acpi_dev_interface.h | 2 +- hw/acpi/core.c | 2 +- hw/acpi/cpu.c | 2 +- hw/acpi/memory_hotplug.c | 2 +- 6 files changed, 158 insertions(+), 158 deletions(-)
qapi/machine.json +154 -0
@@ -1018,3 +1018,157 @@ ## { 'event': 'BALLOON_CHANGE', 'data': { 'actual': 'int' } } + +## +# @AcpiTableOptions: +# +# Specify an ACPI table on the command line to load. +# +# At most one of @file and @data can be specified. The list of files specified +# by any one of them is loaded and concatenated in order. If both are omitted, +# @data is implied. +# +# Other fields / optargs can be used to override fields of the generic ACPI +# table header; refer to the ACPI specification 5.0, section 5.2.6 System +# Description Table Header. If a header field is not overridden, then the +# corresponding value from the concatenated blob is used (in case of @file), or +# it is filled in with a hard-coded value (in case of @data). +# +# String fields are copied into the matching ACPI member from lowest address +# upwards, and silently truncated / NUL-padded to length. +# +# @sig: table signature / identifier (4 bytes) +# +# @rev: table revision number (dependent on signature, 1 byte) +# +# @oem_id: OEM identifier (6 bytes) +# +# @oem_table_id: OEM table identifier (8 bytes) +# +# @oem_rev: OEM-supplied revision number (4 bytes) +# +# @asl_compiler_id: identifier of the utility that created the table +# (4 bytes) +# +# @asl_compiler_rev: revision number of the utility that created the +# table (4 bytes) +# +# @file: colon (:) separated list of pathnames to load and +# concatenate as table data. The resultant binary blob is expected to +# have an ACPI table header. At least one file is required. This field +# excludes @data. +# +# @data: colon (:) separated list of pathnames to load and +# concatenate as table data. The resultant binary blob must not have an +# ACPI table header. At least one file is required. This field excludes +# @file. +# +# Since: 1.5 +## +{ 'struct': 'AcpiTableOptions', + 'data': { + '*sig': 'str', + '*rev': 'uint8', + '*oem_id': 'str', + '*oem_table_id': 'str', + '*oem_rev': 'uint32', + '*asl_compiler_id': 'str', + '*asl_compiler_rev': 'uint32', + '*file': 'str', + '*data': 'str' }} + +## +# @MEM_UNPLUG_ERROR: +# +# Emitted when memory hot unplug error occurs. +# +# @device: device name +# +# @msg: Informative message +# +# Since: 2.4 +# +# Example: +# +# <- { "event": "MEM_UNPLUG_ERROR" +# "data": { "device": "dimm1", +# "msg": "acpi: device unplug for unsupported device" +# }, +# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } +# +## +{ 'event': 'MEM_UNPLUG_ERROR', + 'data': { 'device': 'str', 'msg': 'str' } } + +## +# @ACPISlotType: +# +# @DIMM: memory slot +# @CPU: logical CPU slot (since 2.7) +## +{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] } + +## +# @ACPIOSTInfo: +# +# OSPM Status Indication for a device +# For description of possible values of @source and @status fields +# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec. +# +# @device: device ID associated with slot +# +# @slot: slot ID, unique per slot of a given @slot-type +# +# @slot-type: type of the slot +# +# @source: an integer containing the source event +# +# @status: an integer containing the status code +# +# Since: 2.1 +## +{ 'struct': 'ACPIOSTInfo', + 'data' : { '*device': 'str', + 'slot': 'str', + 'slot-type': 'ACPISlotType', + 'source': 'int', + 'status': 'int' } } + +## +# @query-acpi-ospm-status: +# +# Return a list of ACPIOSTInfo for devices that support status +# reporting via ACPI _OST method. +# +# Since: 2.1 +# +# Example: +# +# -> { "execute": "query-acpi-ospm-status" } +# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0}, +# { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0}, +# { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0}, +# { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0} +# ]} +# +## +{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } + +## +# @ACPI_DEVICE_OST: +# +# Emitted when guest executes ACPI _OST method. +# +# @info: OSPM Status Indication +# +# Since: 2.1 +# +# Example: +# +# <- { "event": "ACPI_DEVICE_OST", +# "data": { "device": "d1", "slot": "0", +# "slot-type": "DIMM", "source": 1, "status": 0 } } +# +## +{ 'event': 'ACPI_DEVICE_OST', + 'data': { 'info': 'ACPIOSTInfo' } }
qapi/misc.json +0 -154
166 lines not on this page · raw message
include/hw/acpi/acpi_dev_interface.h +1 -1
@@ -1,7 +1,7 @@#ifndef ACPI_DEV_INTERFACE_H #define ACPI_DEV_INTERFACE_H -#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-machine.h" #include "qom/object.h" #include "hw/boards.h" #include "hw/qdev-core.h"
hw/acpi/core.c +1 -1
@@ -27,7 +27,7 @@#include "qapi/error.h" #include "qapi/opts-visitor.h" #include "qapi/qapi-events-run-state.h" -#include "qapi/qapi-visit-misc.h" +#include "qapi/qapi-visit-machine.h" #include "qemu/error-report.h" #include "qemu/module.h" #include "qemu/option.h"
hw/acpi/cpu.c +1 -1
@@ -3,7 +3,7 @@#include "migration/vmstate.h" #include "hw/acpi/cpu.h" #include "qapi/error.h" -#include "qapi/qapi-events-misc.h" +#include "qapi/qapi-events-machine.h" #include "trace.h" #include "sysemu/numa.h"
hw/acpi/memory_hotplug.c +1 -1
@@ -7,7 +7,7 @@#include "migration/vmstate.h" #include "trace.h" #include "qapi/error.h" -#include "qapi/qapi-events-misc.h" +#include "qapi/qapi-events-machine.h" #define MEMORY_SLOTS_NUMBER "MDNR"#define MEMORY_HOTPLUG_IO_REGION "HPMR"
Signature · 1 line
2.21.1
PATCH 8/9 qapi/misc: Restrict PCI commands to machine code
In reply to Philippe Mathieu-Daudé--- qapi/machine.json | 304 ++++++++++++++++++++++++++++++++++++++++++++++ qapi/misc.json | 304 ---------------------------------------------- hw/pci/pci-stub.c | 2 +- hw/pci/pci.c | 2 +- 4 files changed, 306 insertions(+), 306 deletions(-)
qapi/machine.json +304 -0
@@ -1172,3 +1172,307 @@ ## { 'event': 'ACPI_DEVICE_OST', 'data': { 'info': 'ACPIOSTInfo' } } + +## +# @PciMemoryRange: +# +# A PCI device memory region +# +# @base: the starting address (guest physical) +# +# @limit: the ending address (guest physical) +# +# Since: 0.14.0 +## +{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} } + +## +# @PciMemoryRegion: +# +# Information about a PCI device I/O region. +# +# @bar: the index of the Base Address Register for this region +# +# @type: - 'io' if the region is a PIO region +# - 'memory' if the region is a MMIO region +# +# @size: memory size +# +# @prefetch: if @type is 'memory', true if the memory is prefetchable +# +# @mem_type_64: if @type is 'memory', true if the BAR is 64-bit +# +# Since: 0.14.0 +## +{ 'struct': 'PciMemoryRegion', + 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int', + '*prefetch': 'bool', '*mem_type_64': 'bool' } } + +## +# @PciBusInfo: +# +# Information about a bus of a PCI Bridge device +# +# @number: primary bus interface number. This should be the number of the +# bus the device resides on. +# +# @secondary: secondary bus interface number. This is the number of the +# main bus for the bridge +# +# @subordinate: This is the highest number bus that resides below the +# bridge. +# +# @io_range: The PIO range for all devices on this bridge +# +# @memory_range: The MMIO range for all devices on this bridge +# +# @prefetchable_range: The range of prefetchable MMIO for all devices on +# this bridge +# +# Since: 2.4 +## +{ 'struct': 'PciBusInfo', + 'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int', + 'io_range': 'PciMemoryRange', + 'memory_range': 'PciMemoryRange', + 'prefetchable_range': 'PciMemoryRange' } } + +## +# @PciBridgeInfo: +# +# Information about a PCI Bridge device +# +# @bus: information about the bus the device resides on +# +# @devices: a list of @PciDeviceInfo for each device on this bridge +# +# Since: 0.14.0 +## +{ 'struct': 'PciBridgeInfo', + 'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} } + +## +# @PciDeviceClass: +# +# Information about the Class of a PCI device +# +# @desc: a string description of the device's class +# +# @class: the class code of the device +# +# Since: 2.4 +## +{ 'struct': 'PciDeviceClass', + 'data': {'*desc': 'str', 'class': 'int'} } + +## +# @PciDeviceId: +# +# Information about the Id of a PCI device +# +# @device: the PCI device id +# +# @vendor: the PCI vendor id +# +# @subsystem: the PCI subsystem id (since 3.1) +# +# @subsystem-vendor: the PCI subsystem vendor id (since 3.1) +# +# Since: 2.4 +## +{ 'struct': 'PciDeviceId', + 'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int', + '*subsystem-vendor': 'int'} } + +## +# @PciDeviceInfo: +# +# Information about a PCI device +# +# @bus: the bus number of the device +# +# @slot: the slot the device is located in +# +# @function: the function of the slot used by the device +# +# @class_info: the class of the device +# +# @id: the PCI device id +# +# @irq: if an IRQ is assigned to the device, the IRQ number +# +# @qdev_id: the device name of the PCI device +# +# @pci_bridge: if the device is a PCI bridge, the bridge information +# +# @regions: a list of the PCI I/O regions associated with the device +# +# Notes: the contents of @class_info.desc are not stable and should only be +# treated as informational. +# +# Since: 0.14.0 +## +{ 'struct': 'PciDeviceInfo', + 'data': {'bus': 'int', 'slot': 'int', 'function': 'int', + 'class_info': 'PciDeviceClass', 'id': 'PciDeviceId', + '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo', + 'regions': ['PciMemoryRegion']} } + +## +# @PciInfo: +# +# Information about a PCI bus +# +# @bus: the bus index +# +# @devices: a list of devices on this bus +# +# Since: 0.14.0 +## +{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} } + +## +# @query-pci: +# +# Return information about the PCI bus topology of the guest. +# +# Returns: a list of @PciInfo for each PCI bus. Each bus is +# represented by a json-object, which has a key with a json-array of +# all PCI devices attached to it. Each device is represented by a +# json-object. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-pci" } +# <- { "return": [ +# { +# "bus": 0, +# "devices": [ +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 0, +# "class_info": { +# "class": 1536, +# "desc": "Host bridge" +# }, +# "id": { +# "device": 32902, +# "vendor": 4663 +# }, +# "function": 0, +# "regions": [ +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 1, +# "class_info": { +# "class": 1537, +# "desc": "ISA bridge" +# }, +# "id": { +# "device": 32902, +# "vendor": 28672 +# }, +# "function": 0, +# "regions": [ +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 1, +# "class_info": { +# "class": 257, +# "desc": "IDE controller" +# }, +# "id": { +# "device": 32902, +# "vendor": 28688 +# }, +# "function": 1, +# "regions": [ +# { +# "bar": 4, +# "size": 16, +# "address": 49152, +# "type": "io" +# } +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 2, +# "class_info": { +# "class": 768, +# "desc": "VGA controller" +# }, +# "id": { +# "device": 4115, +# "vendor": 184 +# }, +# "function": 0, +# "regions": [ +# { +# "prefetch": true, +# "mem_type_64": false, +# "bar": 0, +# "size": 33554432, +# "address": 4026531840, +# "type": "memory" +# }, +# { +# "prefetch": false, +# "mem_type_64": false, +# "bar": 1, +# "size": 4096, +# "address": 4060086272, +# "type": "memory" +# }, +# { +# "prefetch": false, +# "mem_type_64": false, +# "bar": 6, +# "size": 65536, +# "address": -1, +# "type": "memory" +# } +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "irq": 11, +# "slot": 4, +# "class_info": { +# "class": 1280, +# "desc": "RAM controller" +# }, +# "id": { +# "device": 6900, +# "vendor": 4098 +# }, +# "function": 0, +# "regions": [ +# { +# "bar": 0, +# "size": 32, +# "address": 49280, +# "type": "io" +# } +# ] +# } +# ] +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-pci', 'returns': ['PciInfo'] }
qapi/misc.json +0 -304
310 lines not on this page · raw message
hw/pci/pci-stub.c +1 -1
@@ -22,7 +22,7 @@#include "sysemu/sysemu.h" #include "monitor/monitor.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-machine.h" #include "qapi/qmp/qerror.h" #include "hw/pci/pci.h" #include "hw/pci/msi.h"
hw/pci/pci.c +1 -1
@@ -46,7 +46,7 @@#include "hw/hotplug.h" #include "hw/boards.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-machine.h" #include "qemu/cutils.h" //#define DEBUG_PCI
Signature · 1 line
2.21.1
PATCH 6/9 qapi/misc: Restrict query-vm-generation-id command to machine code
In reply to Philippe Mathieu-Daudé--- qapi/machine.json | 20 ++++++++++++++++++++ qapi/misc.json | 21 --------------------- hw/acpi/vmgenid.c | 2 +- stubs/vmgenid.c | 2 +- 4 files changed, 22 insertions(+), 23 deletions(-)
qapi/machine.json +20 -0
@@ -415,6 +415,26 @@ ## { 'command': 'query-target', 'returns': 'TargetInfo' } +## +# @GuidInfo: +# +# GUID information. +# +# @guid: the globally unique identifier +# +# Since: 2.9 +## +{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} } + +## +# @query-vm-generation-id: +# +# Show Virtual Machine Generation ID +# +# Since: 2.9 +## +{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' } + ## # @LostTickPolicy: #
qapi/misc.json +0 -21
@@ -1351,24 +1351,3 @@ # ## { 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} } - -## -# @GuidInfo: -# -# GUID information. -# -# @guid: the globally unique identifier -# -# Since: 2.9 -## -{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} } - -## -# @query-vm-generation-id: -# -# Show Virtual Machine Generation ID -# -# Since: 2.9 -## -{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' } -
hw/acpi/vmgenid.c +1 -1
@@ -12,7 +12,7 @@#include "qemu/osdep.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-machine.h" #include "qemu/module.h" #include "hw/acpi/acpi.h" #include "hw/acpi/aml-build.h"
stubs/vmgenid.c +1 -1
@@ -1,6 +1,6 @@#include "qemu/osdep.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-machine.h" #include "qapi/qmp/qerror.h" GuidInfo *qmp_query_vm_generation_id (Error **errp)
Signature · 1 line
2.21.1
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===
LINK qemu-img/usr/bin/ld: qapi/qapi-commands-char.o: in function `qmp_marshal_add_client':/tmp/qemu-test/build/qapi/qapi-commands-char.c:404: undefined reference to `qmp_add_client'
clang-8: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [/tmp/qemu-test/src/rules.mak:124: qemu-storage-daemon] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
File "./tests/docker/docker.py", line 664, in <module>
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=51e14086532c419b93bbc70aaa6062a4', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=x86_64-softmmu', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-_4qqozfd/src/docker-src.2020-03-13-17.10.10.8098:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-debug']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=51e14086532c419b93bbc70aaa6062a4
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-_4qqozfd/src'
make: *** [docker-run-test-debug@fedora] Error 2
real 4m17.682s
user 0m8.190s
The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1 === TEST SCRIPT END ===
LINK vhost-user-inputqapi/qapi-commands-char.o: In function `qmp_marshal_add_client':/tmp/qemu-test/build/qapi/qapi-commands-char.c:404: undefined reference to `qmp_add_client'
collect2: error: ld returned 1 exit status
make: *** [qemu-storage-daemon] Error 1
make: *** Waiting for unfinished jobs....
GEN x86_64-softmmu/config-target.h
GEN x86_64-softmmu/hmp-commands.h
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=79fd3dced38c4a66beb52a21af5ece9a', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-eu33v9p1/src/docker-src.2020-03-13-17.16.06.18800:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=79fd3dced38c4a66beb52a21af5ece9a
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-eu33v9p1/src'
make: *** [docker-run-test-quick@centos7] Error 2
real 3m28.886s
user 0m8.592s
The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Re: [PATCH 2/9] qapi/misc: Move add_client command with chardev code
In reply to Philippe Mathieu-DaudéHi
Quoted 2 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Without looking at the rest of the series, I fail to see the improvement, quite the opposite. A bit of context?
Quoted 104 lines
--- qapi/char.json | 32 ++++++++++++++++++++++++++++++++ qapi/misc.json | 32 -------------------------------- monitor/qmp-cmds.c | 1 + 3 files changed, 33 insertions(+), 32 deletions(-)qapi/char.json +32
-0@@ -572,3 +572,35 @@ { 'event': 'VSERPORT_CHANGE', 'data': { 'id': 'str', 'open': 'bool' } } + +## +# @add_client: +# +# Allow client connections for VNC, Spice and socket based +# character devices to be passed in to QEMU via SCM_RIGHTS. +# +# @protocol: protocol name. Valid names are "vnc", "spice" or the +# name of a character device (eg. from -chardev id=XXXX) +# +# @fdname: file descriptor name previously passed via 'getfd' command +# +# @skipauth: whether to skip authentication. Only applies +# to "vnc" and "spice" protocols +# +# @tls: whether to perform TLS. Only applies to the "spice" +# protocol +# +# Returns: nothing on success. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "add_client", "arguments": { "protocol": "vnc", +# "fdname": "myclient" } } +# <- { "return": {} } +# +## +{ 'command': 'add_client', + 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', + '*tls': 'bool' } }qapi/misc.json +0
-32@@ -39,38 +39,6 @@ { 'enum': 'LostTickPolicy', 'data': ['discard', 'delay', 'slew' ] } -## -# @add_client: -# -# Allow client connections for VNC, Spice and socket based -# character devices to be passed in to QEMU via SCM_RIGHTS. -# -# @protocol: protocol name. Valid names are "vnc", "spice" or the -# name of a character device (eg. from -chardev id=XXXX) -# -# @fdname: file descriptor name previously passed via 'getfd' command -# -# @skipauth: whether to skip authentication. Only applies -# to "vnc" and "spice" protocols -# -# @tls: whether to perform TLS. Only applies to the "spice" -# protocol -# -# Returns: nothing on success. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "add_client", "arguments": { "protocol": "vnc", -# "fdname": "myclient" } } -# <- { "return": {} } -# -## -{ 'command': 'add_client', - 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', - '*tls': 'bool' } } - ## # @NameInfo: #monitor/qmp-cmds.c +1
-1@@ -31,6 +31,7 @@#include "sysemu/block-backend.h" #include "qapi/error.h" #include "qapi/qapi-commands-block.h" +#include "qapi/qapi-commands-char.h" #include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h" --2.21.1
Re: [PATCH 2/9] qapi/misc: Move add_client command with chardev code
Quoted 9 lines · Marc-André Lureau
Hi
Quoted 2 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Without looking at the rest of the series, I fail to see the improvement, quite the opposite. A bit of context?
You are right this not needed. I guess remember I had a linker failure at some point while working on this series but I then take some patches out while rebasing, so it might be the result of an earlier incorrect patch.
Quoted 106 lines
Quoted 105 lines
--- qapi/char.json | 32 ++++++++++++++++++++++++++++++++ qapi/misc.json | 32 -------------------------------- monitor/qmp-cmds.c | 1 + 3 files changed, 33 insertions(+), 32 deletions(-)qapi/char.json +32
-0@@ -572,3 +572,35 @@ { 'event': 'VSERPORT_CHANGE', 'data': { 'id': 'str', 'open': 'bool' } } + +## +# @add_client: +# +# Allow client connections for VNC, Spice and socket based +# character devices to be passed in to QEMU via SCM_RIGHTS. +# +# @protocol: protocol name. Valid names are "vnc", "spice" or the +# name of a character device (eg. from -chardev id=XXXX) +# +# @fdname: file descriptor name previously passed via 'getfd' command +# +# @skipauth: whether to skip authentication. Only applies +# to "vnc" and "spice" protocols +# +# @tls: whether to perform TLS. Only applies to the "spice" +# protocol +# +# Returns: nothing on success. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "add_client", "arguments": { "protocol": "vnc", +# "fdname": "myclient" } } +# <- { "return": {} } +# +## +{ 'command': 'add_client', + 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', + '*tls': 'bool' } }qapi/misc.json +0
-32@@ -39,38 +39,6 @@ { 'enum': 'LostTickPolicy', 'data': ['discard', 'delay', 'slew' ] } -## -# @add_client: -# -# Allow client connections for VNC, Spice and socket based -# character devices to be passed in to QEMU via SCM_RIGHTS. -# -# @protocol: protocol name. Valid names are "vnc", "spice" or the -# name of a character device (eg. from -chardev id=XXXX) -# -# @fdname: file descriptor name previously passed via 'getfd' command -# -# @skipauth: whether to skip authentication. Only applies -# to "vnc" and "spice" protocols -# -# @tls: whether to perform TLS. Only applies to the "spice" -# protocol -# -# Returns: nothing on success. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "add_client", "arguments": { "protocol": "vnc", -# "fdname": "myclient" } } -# <- { "return": {} } -# -## -{ 'command': 'add_client', - 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', - '*tls': 'bool' } } - ## # @NameInfo: #monitor/qmp-cmds.c +1
-1@@ -31,6 +31,7 @@#include "sysemu/block-backend.h" #include "qapi/error.h" #include "qapi/qapi-commands-block.h" +#include "qapi/qapi-commands-char.h" #include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h" --2.21.1
Re: [PATCH 1/9] target/i386: Restrict X86CPUFeatureWord to X86 targets
In reply to Philippe Mathieu-DaudéQuoted 11 lines · Philippe Mathieu-Daudé
Move out x86-specific structures from generic machine code.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- qapi/machine-target.json | 45 ++++++++++++++++++++++++++++++++++++++ qapi/machine.json | 42 ----------------------------------- target/i386/cpu.c | 2 +- target/i386/machine-stub.c | 22 +++++++++++++++++++ target/i386/Makefile.objs | 3 ++- 5 files changed, 70 insertions(+), 44 deletions(-) create mode 100644 target/i386/machine-stub.c
r~