This patch series introduces universtal update_uboot
v3 cover This patch series introduces universtal update_uboot
wrapper that helps to update U-Boot image on internal storage (eMMC/NAND).
Example of usage:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_uboot
v3:
- No changes
v2:
- No changes
Igor Opaniuk (4):
apalis-tk1: add update_uboot wrapper
apalis_t30: add update_uboot wrapper
colibri_t20: add update_uboot wrapper
colibri_t30: add update_uboot wrapper
include/configs/apalis-tk1.h | 9 +++++++++ include/configs/apalis_t30.h | 11 +++++++++++ include/configs/colibri_t20.h | 8 ++++++-- include/configs/colibri_t30.h | 11 +++++++++++ 4 files changed, 37 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
PATCH v3 1/4 apalis-tk1: add update_uboot wrapper
From: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Create an proper tegra image:
$ cbootimage -s tegra124 apalis-tk1.img.cfg apalis-tk1.img
Flash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_uboot
---
include/configs/apalis-tk1.h | 9 +++++++++ 1 file changed, 9 insertions(+)
include/configs/apalis-tk1.h +9 -0
@@ -46,6 +46,14 @@"zImage fat 0 1 mmcpart 0; " \ "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0" +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=0\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ +#define EMMC_BOOTCMD \ "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ "ro rootfstype=ext4 rootwait\0" \
@@ -104,6 +112,7 @@"fdt_module=" FDT_MODULE "\0" \NFS_BOOTCMD \SD_BOOTCMD \ +UBOOT_UPDATE \"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \"flash_eth.img && source ${loadaddr}\0" \
Signature · 1 line
2.17.1
PATCH v3 1/4 apalis-tk1: add update_uboot wrapper
Quoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add universal
update_ubootwrapper that helps to update U-Boot image on internal storage.
Quoted 8 lines
Create an proper tegra image:
$ cbootimage -s tegra124 apalis-tk1.img.cfg apalis-tk1.imgFlash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_ubootSigned-off-by Igor Opaniuk <[email protected]>
Quoted 35 lines
---
include/configs/apalis-tk1.h | 9 +++++++++ 1 file changed, 9 insertions(+)include/configs/apalis-tk1.h +9
-1@@ -46,6 +46,14 @@"zImage fat 0 1 mmcpart 0; " \ "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0" +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=0\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ +#define EMMC_BOOTCMD \ "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ "ro rootfstype=ext4 rootwait\0" \@@ -104,6 +112,7 @@"fdt_module=" FDT_MODULE "\0" \NFS_BOOTCMD \SD_BOOTCMD \ +UBOOT_UPDATE \"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \"flash_eth.img && source ${loadaddr}\0" \ --2.17.1
Signature · 5 lines
Best regards Oleksandr Suvorov Toradex AG Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00
PATCH v3 2/4 apalis_t30: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Create an proper tegra image:
$ cbootimage -s tegra30 apalis_t30.img.cfg apalis_t30.img
Flash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_uboot
---
include/configs/apalis_t30.h | 11 +++++++++++ 1 file changed, 11 insertions(+)
include/configs/apalis_t30.h +11 -0
@@ -40,6 +40,17 @@#undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32 +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=0\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + +#define BOARD_EXTRA_ENV_SETTINGS \ + UBOOT_UPDATE +#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h"
Signature · 1 line
2.17.1
PATCH v3 2/4 apalis_t30: add update_uboot wrapper
Quoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add universal
update_ubootwrapper that helps to update U-Boot image on internal storage.
Quoted 8 lines
Create an proper tegra image:
$ cbootimage -s tegra30 apalis_t30.img.cfg apalis_t30.imgFlash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_ubootSigned-off-by Igor Opaniuk <[email protected]>
Quoted 30 lines
---
include/configs/apalis_t30.h | 11 +++++++++++ 1 file changed, 11 insertions(+)include/configs/apalis_t30.h +11
-1@@ -40,6 +40,17 @@#undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32 +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=0\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + +#define BOARD_EXTRA_ENV_SETTINGS \ + UBOOT_UPDATE +#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" --2.17.1
Signature · 5 lines
Best regards Oleksandr Suvorov Toradex AG Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00
PATCH v3 3/4 colibri_t20: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage(NAND).
Create an proper tegra image:
$ cbootimage -s tegra20 colibri_t20-512-v12-nand.img.cfg colibri_t20.img
Flash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_uboot
---
include/configs/colibri_t20.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
include/configs/colibri_t20.h +6 -2
@@ -27,10 +27,14 @@#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ +#define UBOOT_UPDATE \ + "update_uboot=nand erase.part u-boot && " \ + "nand write ${loadaddr} u-boot ${filesize}\0" \ +/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ #define BOARD_EXTRA_ENV_SETTINGS \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + UBOOT_UPDATE/* Increase console I/O buffer size */ #undef CONFIG_SYS_CBSIZE
Signature · 1 line
2.17.1
PATCH v3 3/4 colibri_t20: add update_uboot wrapper
Quoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add universal
update_ubootwrapper that helps to update U-Boot image on internal storage(NAND).
Quoted 8 lines
Create an proper tegra image:
$ cbootimage -s tegra20 colibri_t20-512-v12-nand.img.cfg colibri_t20.imgFlash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_ubootSigned-off-by Igor Opaniuk <[email protected]>
Quoted 29 lines
---
include/configs/colibri_t20.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)include/configs/colibri_t20.h +6
-3@@ -27,10 +27,14 @@#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ +#define UBOOT_UPDATE \ + "update_uboot=nand erase.part u-boot && " \ + "nand write ${loadaddr} u-boot ${filesize}\0" \ +/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ #define BOARD_EXTRA_ENV_SETTINGS \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + UBOOT_UPDATE/* Increase console I/O buffer size */ #undef CONFIG_SYS_CBSIZE --2.17.1
Signature · 5 lines
Best regards Oleksandr Suvorov Toradex AG Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00
PATCH v3 4/4 colibri_t30: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Create an proper tegra image:
$ cbootimage -s tegra30 colibri_t30.img.cfg colibri_t30.img
Flash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_uboot
---
include/configs/colibri_t30.h | 11 +++++++++++ 1 file changed, 11 insertions(+)
include/configs/colibri_t30.h +11 -0
@@ -39,6 +39,17 @@#undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32 +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=0\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + +#define BOARD_EXTRA_ENV_SETTINGS \ + UBOOT_UPDATE +#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h"
Signature · 1 line
2.17.1
PATCH v3 4/4 colibri_t30: add update_uboot wrapper
Quoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add universal
update_ubootwrapper that helps to update U-Boot image on internal storage.
Quoted 8 lines
Create an proper tegra image:
$ cbootimage -s tegra30 colibri_t30.img.cfg colibri_t30.imgFlash in U-boot shell:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/${board_name}.img run
update_ubootSigned-off-by Igor Opaniuk <[email protected]>
Quoted 28 lines
---
include/configs/colibri_t30.h | 11 +++++++++++ 1 file changed, 11 insertions(+)include/configs/colibri_t30.h +11
-1@@ -39,6 +39,17 @@#undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32 +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=0\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + +#define BOARD_EXTRA_ENV_SETTINGS \ + UBOOT_UPDATE +#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" --
Quoted 2 lines
2.17.1
--
Best regards
Oleksandr Suvorov
Toradex AG
Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00