Skip to contentSkip to conversation

toradex: tegra: add update_uboot wrapper

PATCH Superseded Igor Opaniuk 1 participant 5 messages Dec 9, 2019

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover toradex: tegra: add update_uboot wrapper

This patch series introduces universtal update_uboot
wrapper that helps to update U-Boot image on internal storage (eMMC/NAND).

Example of usage:

Quoted 2 lines

tftpboot ${loadaddr} ${board_name}/${board_name}.img run update_uboot

Igor Opaniuk (4):
apalis-tk1: add update_uboot wrapper
apalis_t30: add update_uboot wrapper
colibri_t20: add update_uboot wrapper
colibri_t30: add update_uboot wrapper

 include/configs/apalis-tk1.h  |  9 +++++++++
 include/configs/apalis_t30.h  | 11 +++++++++++
 include/configs/colibri_t20.h |  8 ++++++--
 include/configs/colibri_t30.h | 11 +++++++++++
 4 files changed, 37 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/4 apalis-tk1: add update_uboot wrapper

From: Igor Opaniuk <[email protected]>

Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.

Create an proper tegra image:

$ cbootimage -s tegra124 apalis-tk1.img.cfg apalis-tk1.img

Flash in U-boot shell:

Quoted 2 lines

tftpboot ${loadaddr} ${board_name}/${board_name}.img run update_uboot

---

 include/configs/apalis-tk1.h | 9 +++++++++
 1 file changed, 9 insertions(+)
include/configs/apalis-tk1.h +9 -0
index 4127f2d6c6..8ca571b9b7 100644
@@ -46,6 +46,14 @@
 				"zImage fat 0 1 mmcpart 0; " \
 				"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
 #define EMMC_BOOTCMD \
 	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
 		"ro rootfstype=ext4 rootwait\0" \
@@ -104,6 +112,7 @@
 	"fdt_module=" FDT_MODULE "\0" \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
+	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
Signature · 1 line
2.17.1
#2 lore raw

PATCH v2 2/4 apalis_t30: add update_uboot wrapper

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.

Create an proper tegra image:

$ cbootimage -s tegra30 apalis_t30.img.cfg apalis_t30.img

Flash in U-boot shell:

Quoted 2 lines

tftpboot ${loadaddr} ${board_name}/${board_name}.img run update_uboot

---

 include/configs/apalis_t30.h | 11 +++++++++++
 1 file changed, 11 insertions(+)
include/configs/apalis_t30.h +11 -0
index 821162a2be..701b34aa84 100644
@@ -40,6 +40,17 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	UBOOT_UPDATE
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
Signature · 1 line
2.17.1
#3 lore raw

PATCH v2 3/4 colibri_t20: add update_uboot wrapper

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Add universal update_uboot wrapper that helps to update U-Boot image on internal storage(NAND).

Create an proper tegra image:

$ cbootimage -s tegra20 colibri_t20-512-v12-nand.img.cfg colibri_t20.img

Flash in U-boot shell:

Quoted 2 lines

tftpboot ${loadaddr} ${board_name}/${board_name}.img run update_uboot

---

 include/configs/colibri_t20.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
include/configs/colibri_t20.h +6 -2
index 122294de6f..94e17bbb7c 100644
@@ -27,10 +27,14 @@
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define UBOOT_UPDATE \
+	"update_uboot=nand erase.part u-boot && " \
+		"nand write ${loadaddr} u-boot ${filesize}\0" \
 
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
 #define BOARD_EXTRA_ENV_SETTINGS \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	UBOOT_UPDATE
 
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
Signature · 1 line
2.17.1
#4 lore raw

PATCH v2 4/4 colibri_t30: add update_uboot wrapper

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.

Create an proper tegra image:

$ cbootimage -s tegra30 colibri_t30.img.cfg colibri_t30.img

Flash in U-boot shell:

Quoted 2 lines

tftpboot ${loadaddr} ${board_name}/${board_name}.img run update_uboot

---

 include/configs/colibri_t30.h | 11 +++++++++++
 1 file changed, 11 insertions(+)
include/configs/colibri_t30.h +11 -0
index 5aecf14393..4e5e89b547 100644
@@ -39,6 +39,17 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	UBOOT_UPDATE
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
Signature · 1 line
2.17.1