dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name
Subsystems (3)
PATCH 1/1 dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name
The following warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s
Fix it by removing the unneeded i2c unit name.
--- .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +1 -1
@@ -109,7 +109,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c@00000000 { + i2c { #address-cells = <1>; #size-cells = <0>; edt-ft5x06@38 {
Signature · 1 line
2.17.1
Quoted 5 lines · Fabio Estevam
The following warnings are seen with 'make
dt_binding_check':Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (
unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s
Quoted 7 lines
Fix it by removing the unneeded i2c unit name.
Signed-off-by Fabio Estevam <[email protected]>--- .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
Rob