Skip to contentSkip to conversation

dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name

PATCH Applied Fabio Estevam 2 participants 2 messages Mar 27, 2020 – Apr 9, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name

The following warnings are seen with 'make dt_binding_check':

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s

Fix it by removing the unneeded i2c unit name.

---
 .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +1 -1
index 8d58709d4b47..383d64a91854 100644
@@ -109,7 +109,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       edt-ft5x06@38 {
Signature · 1 line
2.17.1
maintainer Applied
#1 lore raw
Quoted 5 lines · Fabio Estevam

The following warnings are seen with 'make dt_binding_check':

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s

Quoted 7 lines

Fix it by removing the unneeded i2c unit name.

---
 .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks.

Rob