ARM: dts: stm32: Rename LEDs to match silkscreen on AV96
Subsystems (2)
PATCH 1/1 ARM: dts: stm32: Rename LEDs to match silkscreen on AV96
The LED labels do not match the silkscreen on the board, fix it.
Signed-off-by Marek Vasut <[email protected]>
Cc Manivannan Sadhasivam <[email protected]>
Cc Patrick Delaunay <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Tom Rini <[email protected]>
--- arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/stm32mp157a-avenger96.dts +3 -3
@@ -36,21 +36,21 @@ led { compatible = "gpio-leds"; led1 { - label = "green:user1"; + label = "green:user0"; gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led2 { - label = "green:user2"; + label = "green:user1"; gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; led3 { - label = "green:user3"; + label = "green:user2"; gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; default-state = "off";
Signature · 1 line
2.25.1
PATCH 1/1 ARM: dts: stm32: Rename LEDs to match silkscreen on AV96
Quoted 3 lines · Marek Vasut
The LED labels do not match the silkscreen on the board, fix it.
Signed-off-by Marek Vasut <[email protected]>
Reviewed-by Manivannan Sadhasivam <[email protected]>
Thanks,
Mani
Quoted 40 lines
Cc Manivannan Sadhasivam <[email protected]>Cc Patrick Delaunay <[email protected]>Cc Patrice Chotard <[email protected]>Cc Tom Rini <[email protected]>--- arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)arch/arm/dts/stm32mp157a-avenger96.dts +3
-3@@ -36,21 +36,21 @@ led { compatible = "gpio-leds"; led1 { - label = "green:user1"; + label = "green:user0"; gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led2 { - label = "green:user2"; + label = "green:user1"; gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; led3 { - label = "green:user3"; + label = "green:user2"; gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; default-state = "off";Signature · 1 line
2.25.1
PATCH 1/1 ARM: dts: stm32: Rename LEDs to match silkscreen on AV96
Hi
Quoted 8 lines · Manivannan Sadhasivam
Quoted 3 lines · Marek Vasut
The LED labels do not match the silkscreen on the board, fix it.
Signed-off-by Marek Vasut <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>Thanks,
Mani
Applied to u-boot-stm/next
Thanks
Patrice
Quoted 40 lines
Quoted 40 lines
Cc Manivannan Sadhasivam <[email protected]>Cc Patrick Delaunay <[email protected]>Cc Patrice Chotard <[email protected]>Cc Tom Rini <[email protected]>--- arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)arch/arm/dts/stm32mp157a-avenger96.dts +3
-3@@ -36,21 +36,21 @@ led { compatible = "gpio-leds"; led1 { - label = "green:user1"; + label = "green:user0"; gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led2 { - label = "green:user2"; + label = "green:user1"; gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; led3 { - label = "green:user3"; + label = "green:user2"; gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; default-state = "off";Signature · 1 line
2.25.1