Skip to contentSkip to conversation

ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

PATCH New Marek Vasut 3 participants 3 messages Apr 6, 2020 – Apr 15, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

The LED labels do not match the silkscreen on the board, fix it.

Cc Manivannan Sadhasivam <[email protected]>
Cc Patrick Delaunay <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Tom Rini <[email protected]>
---
 arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/stm32mp157a-avenger96.dts +3 -3
index 1f32395e71..735228a895 100644
@@ -36,21 +36,21 @@
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/1 ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

Quoted 3 lines · Marek Vasut

The LED labels do not match the silkscreen on the board, fix it.

Thanks,
Mani

Quoted 40 lines
Cc Manivannan Sadhasivam <[email protected]>
Cc Patrick Delaunay <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Tom Rini <[email protected]>
---
 arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/stm32mp157a-avenger96.dts +3 -3
index 1f32395e71..735228a895 100644
@@ -36,21 +36,21 @@
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
Signature · 1 line
2.25.1
#2 lore raw

PATCH 1/1 ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

Hi

Quoted 8 lines · Manivannan Sadhasivam
Quoted 3 lines · Marek Vasut

The LED labels do not match the silkscreen on the board, fix it.

Thanks,
Mani

Applied to u-boot-stm/next

Thanks

Patrice

Quoted 40 lines
Quoted 40 lines
Cc Manivannan Sadhasivam <[email protected]>
Cc Patrick Delaunay <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Tom Rini <[email protected]>
---
 arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/stm32mp157a-avenger96.dts +3 -3
index 1f32395e71..735228a895 100644
@@ -36,21 +36,21 @@
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
Signature · 1 line
2.25.1