Skip to contentSkip to conversation

perf tools: add support for libpfm4

PATCH Superseded Ian Rogers 1 participant 5 messages Apr 14, 2020

Subsystems (4)

v9 of 14 Superseded Latest is v14 →

lore
Share & tools
lore

Ian Rogers

author reviewer
#0 lore raw

v9 cover perf tools: add support for libpfm4

This patch links perf with the libpfm4 library if it is available and NO_LIBPFM4 isn't passed to the build. The libpfm4 library contains hardware event tables for all processors supported by perf_events. It is a helper library that helps convert from a symbolic event name to the event encoding required by the underlying kernel interface. This library is open-source and available from: http://perfmon2.sf.net.

With this patch, it is possible to specify full hardware events by name. Hardware filters are also supported. Events must be specified via the --pfm-events and not -e option. Both options are active at the same time and it is possible to mix and match:

$ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles ....

v9 addresses review comments from [email protected] in particular to reduce the
number of ifdefs and to make the feature extra rather than basic.
v8 addresses review comments from [email protected].
Breaks the patch into 4, adds a test and moves the libpfm code into its own file. perf list encoding tries to be closer to existing:
...
skx pfm-events
UNHALTED_CORE_CYCLES
[Count core clock cycles whenever the clock signal on the specific ...
UNHALTED_REFERENCE_CYCLES
[Unhalted reference cycles]
INSTRUCTION_RETIRED
[Number of instructions at retirement]
INSTRUCTIONS_RETIRED
[This is an alias for INSTRUCTION_RETIRED]
BRANCH_INSTRUCTIONS_RETIRED
[Count branch instructions at retirement. Specifically, this event ...
MISPREDICTED_BRANCH_RETIRED
[Count mispredicted branch instructions at retirement. ...
BACLEARS
[Branch re-steered]
BACLEARS:ANY
[Number of front-end re-steers due to BPU misprediction]
BR_INST_RETIRED
[Branch instructions retired (Precise Event)]
BR_INST_RETIRED:CONDITIONAL
[Counts all taken and not taken macro conditional branch ...
...
and supports --long-desc/-v:
...
BACLEARS
[Branch re-steered]
Code : 0xe6
BACLEARS:ANY
[Number of front-end re-steers due to BPU misprediction] Umask : 0x01 : PMU: [default]
Modif : PMU: [e] : edge level (may require counter-mask >= 1) ... Modif : PMU: [i] : invert (boolean)
Modif : PMU: [c] : counter-mask in range [0-255] (integer) Modif : PMU: [t] : measure any thread (boolean)
Modif : PMU: [intx] : monitor only inside transactional memory ... Modif : PMU: [intxcp] : do not count occurrences inside aborted ... Modif : perf_event: [u] : monitor at user level (boolean) Modif : perf_event: [k] : monitor at kernel level (boolean) Modif : perf_event: [period] : sampling period (integer) Modif : perf_event: [freq] : sampling frequency (Hz) (integer) Modif : perf_event: [excl] : exclusive access (boolean) Modif : perf_event: [mg] : monitor guest execution (boolean) Modif : perf_event: [mh] : monitor host execution (boolean) Modif : perf_event: [cpu] : CPU to program (integer)
Modif : perf_event: [pinned] : pin event to counters (boolean)
BR_INST_RETIRED
[Branch instructions retired (Precise Event)]
Code : 0xc4
BR_INST_RETIRED:CONDITIONAL
[Counts all taken and not taken macro conditional branch ... Umask : 0x01 : PMU: [precise]

v7 rebases and adds fallback code for libpfm4 events.
The fallback code is to force user only priv level in case the perf_event_open() syscall failed for permissions reason. the fallback forces a user privilege level restriction on the event string, so depending on the syntax either u or :u is needed.

But libpfm4 can use a : or . as the separator, so simply searching for ':' vs. '/' is not good enough to determine the syntax needed. Therefore, this patch introduces a new evsel boolean field to mark events coming from libpfm4. The field is then used to adjust the fallback string.
v6 was a rebase.
v5 was a rebase.
v4 was a rebase on
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git
branch perf/core and re-adds the tools/build/feature/test-libpfm4.c missed in v3.
v3 is against acme/perf/core and removes a diagnostic warning. v2 of this patch makes the --pfm-events man page documentation
conditional on libpfm4 behing configured. It tidies some of the documentation and adds the feature test missed in the v1 patch.

Ian Rogers (1):
perf doc: allow ASCIIDOC_EXTRA to be an argument

Stephane Eranian (3):
tools feature: add support for detecting libpfm4 perf pmu: add perf_pmu__find_by_type helper perf tools: add support for libpfm4

 tools/build/Makefile.feature             |   3 +-
 tools/build/feature/Makefile             |   6 +-
 tools/build/feature/test-libpfm4.c       |   9 +
 tools/perf/Documentation/Makefile        |   4 +-
 tools/perf/Documentation/perf-record.txt |  11 +
 tools/perf/Documentation/perf-stat.txt   |  10 +
 tools/perf/Documentation/perf-top.txt    |  11 +
 tools/perf/Makefile.config               |  12 +
 tools/perf/Makefile.perf                 |   6 +-
 tools/perf/builtin-list.c                |  12 +-
 tools/perf/builtin-record.c              |  11 +
 tools/perf/builtin-stat.c                |  13 ++
 tools/perf/builtin-top.c                 |   8 +
 tools/perf/tests/Build                   |   1 +
 tools/perf/tests/builtin-test.c          |   9 +
 tools/perf/tests/pfm.c                   | 207 +++++++++++++++++
 tools/perf/tests/tests.h                 |   3 +
 tools/perf/util/Build                    |   2 +
 tools/perf/util/evsel.c                  |   2 +-
 tools/perf/util/evsel.h                  |   1 +
 tools/perf/util/parse-events.c           |  30 ++-
 tools/perf/util/parse-events.h           |   4 +
 tools/perf/util/pfm.c                    | 278 +++++++++++++++++++++++
 tools/perf/util/pfm.h                    |  43 ++++
 tools/perf/util/pmu.c                    |  11 +
 tools/perf/util/pmu.h                    |   1 +
 26 files changed, 693 insertions(+), 15 deletions(-)
 create mode 100644 tools/build/feature/test-libpfm4.c
 create mode 100644 tools/perf/tests/pfm.c
 create mode 100644 tools/perf/util/pfm.c
 create mode 100644 tools/perf/util/pfm.h
Signature · 1 line
2.26.0.110.g2183baf09c-goog
author reviewer
#1 lore raw

PATCH v9 1/4 perf doc: allow ASCIIDOC_EXTRA to be an argument

This will allow parent makefiles to pass values to asciidoc.

---
 tools/perf/Documentation/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/perf/Documentation/Makefile +2 -2
index 31824d5269cc..6e54979c2124 100644
@@ -48,7 +48,7 @@ man5dir=$(mandir)/man5
 man7dir=$(mandir)/man7
 
 ASCIIDOC=asciidoc
-ASCIIDOC_EXTRA = --unsafe -f asciidoc.conf
+ASCIIDOC_EXTRA += --unsafe -f asciidoc.conf
 ASCIIDOC_HTML = xhtml11
 MANPAGE_XSL = manpage-normal.xsl
 XMLTO_EXTRA =
@@ -59,7 +59,7 @@ HTML_REF = origin/html
 
 ifdef USE_ASCIIDOCTOR
 ASCIIDOC = asciidoctor
-ASCIIDOC_EXTRA = -a compat-mode
+ASCIIDOC_EXTRA += -a compat-mode
 ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions
 ASCIIDOC_EXTRA += -a mansource="perf" -a manmanual="perf Manual"
 ASCIIDOC_HTML = xhtml5
Signature · 1 line
2.26.0.110.g2183baf09c-goog
author reviewer
#2 lore raw

PATCH v9 2/4 tools feature: add support for detecting libpfm4

In reply to Ian Rogers

From: Stephane Eranian <[email protected]>

libpfm4 provides an alternate command line encoding of perf events.

---
 tools/build/Makefile.feature       | 3 ++-
 tools/build/feature/Makefile       | 6 +++++-
 tools/build/feature/test-libpfm4.c | 9 +++++++++
 3 files changed, 16 insertions(+), 2 deletions(-)
 create mode 100644 tools/build/feature/test-libpfm4.c
tools/build/Makefile.feature +2 -1
index 3e0c019ef297..3abd4316cd4f 100644
@@ -98,7 +98,8 @@ FEATURE_TESTS_EXTRA :=                  \
          llvm                           \
          llvm-version                   \
          clang                          \
-         libbpf
+         libbpf                         \
+         libpfm4
 
 FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)
 
tools/build/feature/Makefile +5 -1
index 621f528f7822..a6eded94a36b 100644
@@ -68,7 +68,8 @@ FILES=                                          \
          test-llvm-version.bin			\
          test-libaio.bin			\
          test-libzstd.bin			\
-         test-file-handle.bin
+         test-file-handle.bin			\
+         test-libpfm4.bin
 
 FILES := $(addprefix $(OUTPUT),$(FILES))
 
@@ -325,6 +326,9 @@ $(OUTPUT)test-libzstd.bin:
 $(OUTPUT)test-file-handle.bin:
 	$(BUILD)
 
+$(OUTPUT)test-libpfm4.bin:
+	$(BUILD) -lpfm
+
 ###############################
 
 clean:
tools/build/feature/test-libpfm4.c new file +9 -0
new file mode 100644
index 000000000000..af49b259459e
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <sys/types.h>
+#include <perfmon/pfmlib.h>
+
+int main(void)
+{
+	pfm_initialize();
+	return 0;
+}
Signature · 1 line
2.26.0.110.g2183baf09c-goog
author reviewer
#3 lore raw

PATCH v9 3/4 perf pmu: add perf_pmu__find_by_type helper

In reply to Ian Rogers

From: Stephane Eranian <[email protected]>

This is used by libpfm4 during event parsing to locate the pmu for an event.

---
 tools/perf/util/pmu.c | 11 +++++++++++
 tools/perf/util/pmu.h |  1 +
 2 files changed, 12 insertions(+)
tools/perf/util/pmu.c +11 -0
index ef6a63f3d386..5e918ca740c6 100644
@@ -869,6 +869,17 @@ static struct perf_pmu *pmu_find(const char *name)
 	return NULL;
 }
 
+struct perf_pmu *perf_pmu__find_by_type(unsigned int type)
+{
+	struct perf_pmu *pmu;
+
+	list_for_each_entry(pmu, &pmus, list)
+		if (pmu->type == type)
+			return pmu;
+
+	return NULL;
+}
+
 struct perf_pmu *perf_pmu__scan(struct perf_pmu *pmu)
 {
 	/*
tools/perf/util/pmu.h +1 -0
index 5fb3f16828df..de3b868d912c 100644
@@ -65,6 +65,7 @@ struct perf_pmu_alias {
 };
 
 struct perf_pmu *perf_pmu__find(const char *name);
+struct perf_pmu *perf_pmu__find_by_type(unsigned int type);
 int perf_pmu__config(struct perf_pmu *pmu, struct perf_event_attr *attr,
 		     struct list_head *head_terms,
 		     struct parse_events_error *error);
Signature · 1 line
2.26.0.110.g2183baf09c-goog
author reviewer
#4 lore raw

PATCH v9 4/4 perf tools: add support for libpfm4

In reply to Ian Rogers

From: Stephane Eranian <[email protected]>

This patch links perf with the libpfm4 library if it is available and NO_LIBPFM4 isn't passed to the build. The libpfm4 library contains hardware event tables for all processors supported by perf_events. It is a helper library that helps convert from a symbolic event name to the event encoding required by the underlying kernel interface. This library is open-source and available from: http://perfmon2.sf.net.

With this patch, it is possible to specify full hardware events by name. Hardware filters are also supported. Events must be specified via the --pfm-events and not -e option. Both options are active at the same time and it is possible to mix and match:

$ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles ....
---
 tools/perf/Documentation/perf-record.txt |  11 +
 tools/perf/Documentation/perf-stat.txt   |  10 +
 tools/perf/Documentation/perf-top.txt    |  11 +
 tools/perf/Makefile.config               |  12 +
 tools/perf/Makefile.perf                 |   6 +-
 tools/perf/builtin-list.c                |  12 +-
 tools/perf/builtin-record.c              |  11 +
 tools/perf/builtin-stat.c                |  13 ++
 tools/perf/builtin-top.c                 |   8 +
 tools/perf/tests/Build                   |   1 +
 tools/perf/tests/builtin-test.c          |   9 +
 tools/perf/tests/pfm.c                   | 207 +++++++++++++++++
 tools/perf/tests/tests.h                 |   3 +
 tools/perf/util/Build                    |   2 +
 tools/perf/util/evsel.c                  |   2 +-
 tools/perf/util/evsel.h                  |   1 +
 tools/perf/util/parse-events.c           |  30 ++-
 tools/perf/util/parse-events.h           |   4 +
 tools/perf/util/pfm.c                    | 278 +++++++++++++++++++++++
 tools/perf/util/pfm.h                    |  43 ++++
 20 files changed, 663 insertions(+), 11 deletions(-)
 create mode 100644 tools/perf/tests/pfm.c
 create mode 100644 tools/perf/util/pfm.c
 create mode 100644 tools/perf/util/pfm.h
tools/perf/Documentation/perf-record.txt +11 -0
index b3f3b3f1c161..ad2c41f595c2 100644
@@ -596,6 +596,17 @@ Make a copy of /proc/kcore and place it into a directory with the perf data file
 Limit the sample data max size, <size> is expected to be a number with
 appended unit character - B/K/M/G
 
+ifdef::HAVE_LIBPFM[]
+--pfm-events events::
+Select a PMU event using libpfm4 syntax (see http://perfmon2.sf.net)
+including support for event filters. For example '--pfm-events
+inst_retired:any_p:u:c=1:i'. More than one event can be passed to the
+option using the comma separator. Hardware events and generic hardware
+events cannot be mixed together. The latter must be used with the -e
+option. The -e option and this one can be mixed and matched.  Events
+can be grouped using the {} notation.
+endif::HAVE_LIBPFM[]
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1], linkperf:perf-intel-pt[1]
tools/perf/Documentation/perf-stat.txt +10 -0
index 4d56586b2fb9..536952ad592c 100644
@@ -71,6 +71,16 @@ report::
 --tid=<tid>::
         stat events on existing thread id (comma separated list)
 
+ifdef::HAVE_LIBPFM[]
+--pfm-events events::
+Select a PMU event using libpfm4 syntax (see http://perfmon2.sf.net)
+including support for event filters. For example '--pfm-events
+inst_retired:any_p:u:c=1:i'. More than one event can be passed to the
+option using the comma separator. Hardware events and generic hardware
+events cannot be mixed together. The latter must be used with the -e
+option. The -e option and this one can be mixed and matched.  Events
+can be grouped using the {} notation.
+endif::HAVE_LIBPFM[]
 
 -a::
 --all-cpus::
tools/perf/Documentation/perf-top.txt +11 -0
index 487737a725e9..9858e3640b0c 100644
@@ -319,6 +319,17 @@ Default is to monitor all CPUS.
 	go straight to the histogram browser, just like 'perf top' with no events
 	explicitely specified does.
 
+ifdef::HAVE_LIBPFM[]
+--pfm-events events::
+Select a PMU event using libpfm4 syntax (see http://perfmon2.sf.net)
+including support for event filters. For example '--pfm-events
+inst_retired:any_p:u:c=1:i'. More than one event can be passed to the
+option using the comma separator. Hardware events and generic hardware
+events cannot be mixed together. The latter must be used with the -e
+option. The -e option and this one can be mixed and matched.  Events
+can be grouped using the {} notation.
+endif::HAVE_LIBPFM[]
+
 
 INTERACTIVE PROMPTING KEYS
 --------------------------
tools/perf/Makefile.config +12 -0
index 12a8204d63c6..26167ad38a47 100644
@@ -1012,6 +1012,18 @@ ifdef LIBCLANGLLVM
   endif
 endif
 
+ifndef NO_LIBPFM4
+  ifeq ($(feature-libpfm4), 1)
+    CFLAGS += -DHAVE_LIBPFM
+    EXTLIBS += -lpfm
+    ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1
+    $(call detected,CONFIG_LIBPFM4)
+  else
+    msg := $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev);
+    NO_LIBPFM4 := 1
+  endif
+endif
+
 # Among the variables below, these:
 #   perfexecdir
 #   perf_include_dir
tools/perf/Makefile.perf +4 -2
index d15a311408f1..9787eb3ca0a9 100644
@@ -118,6 +118,8 @@ include ../scripts/utilities.mak
 #
 # Define LIBBPF_DYNAMIC to enable libbpf dynamic linking.
 #
+# Define NO_LIBPFM4 to disable libpfm4 extension.
+#
 
 # As per kernel Makefile, avoid funny character set dependencies
 unexport LC_ALL
@@ -188,7 +190,7 @@ AWK     = awk
 # non-config cases
 config := 1
 
-NON_CONFIG_TARGETS := clean python-clean TAGS tags cscope help install-doc install-man install-html install-info install-pdf doc man html info pdf
+NON_CONFIG_TARGETS := clean python-clean TAGS tags cscope help
 
 ifdef MAKECMDGOALS
 ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
@@ -832,7 +834,7 @@ INSTALL_DOC_TARGETS += quick-install-doc quick-install-man quick-install-html
 
 # 'make doc' should call 'make -C Documentation all'
 $(DOC_TARGETS):
-	$(Q)$(MAKE) -C $(DOC_DIR) O=$(OUTPUT) $(@:doc=all)
+	$(Q)$(MAKE) -C $(DOC_DIR) O=$(OUTPUT) $(@:doc=all) ASCIIDOC_EXTRA=$(ASCIIDOC_EXTRA)
 
 TAG_FOLDERS= . ../lib ../include
 TAG_FILES= ../../include/uapi/linux/perf_event.h
tools/perf/builtin-list.c +11 -1
index 965ef017496f..7e47dfc42b4e 100644
@@ -14,6 +14,7 @@
 #include "util/pmu.h"
 #include "util/debug.h"
 #include "util/metricgroup.h"
+#include "util/pfm.h"
 #include <subcmd/pager.h>
 #include <subcmd/parse-options.h>
 #include <stdio.h>
@@ -45,6 +46,13 @@ int cmd_list(int argc, const char **argv)
 		"perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|event_glob]",
 		NULL
 	};
+#ifndef HAVE_LIBPFM
+	const char *header =
+		"\nList of pre-defined events (to be used in -e):\n\n";
+#else
+	const char *header =
+	 "\nList of pre-defined events (to be used in -e or --pfm-events):\n\n";
+#endif
 
 	set_option_flag(list_options, 0, "raw-dump", PARSE_OPT_HIDDEN);
 
@@ -53,8 +61,10 @@ int cmd_list(int argc, const char **argv)
 
 	setup_pager();
 
+	libpfm_initialize();
+
 	if (!raw_dump && pager_in_use())
-		printf("\nList of pre-defined events (to be used in -e):\n\n");
+		puts(header);
 
 	if (argc == 0) {
 		print_events(NULL, raw_dump, !desc_flag, long_desc_flag,
tools/perf/builtin-record.c +11 -0
index 1ab349abe904..80ac598f125b 100644
@@ -43,6 +43,7 @@
 #include "util/time-utils.h"
 #include "util/units.h"
 #include "util/bpf-event.h"
+#include "util/pfm.h"
 #include "asm/bug.h"
 #include "perf.h"
 
@@ -64,6 +65,9 @@
 #include <linux/zalloc.h>
 #include <linux/bitmap.h>
 
+
+
+
 struct switch_output {
 	bool		 enabled;
 	bool		 signal;
@@ -2421,6 +2425,11 @@ static struct option __record_options[] = {
 #endif
 	OPT_CALLBACK(0, "max-size", &record.output_max_size,
 		     "size", "Limit the maximum size of the output file", parse_output_max_size),
+#ifdef HAVE_LIBPFM
+	OPT_CALLBACK(0, "pfm-events", &record.evlist, "event",
+		"libpfm4 event selector. use 'perf list' to list available events",
+		parse_libpfm_events_option),
+#endif
 	OPT_END()
 };
 
@@ -2461,6 +2470,8 @@ int cmd_record(int argc, const char **argv)
 	if (rec->evlist == NULL)
 		return -ENOMEM;
 
+	libpfm_initialize();
+
 	err = perf_config(perf_record_config, rec);
 	if (err)
 		return err;
tools/perf/builtin-stat.c +13 -0
index ec053dc1e35c..27fc96ee2436 100644
@@ -89,6 +89,10 @@
 #include <linux/ctype.h>
 #include <perf/evlist.h>
 
+#ifdef HAVE_LIBPFM
+#include "util/pfm.h"
+#endif
+
 #define DEFAULT_SEPARATOR	" "
 #define FREEZE_ON_SMI_PATH	"devices/cpu/freeze_on_smi"
 
@@ -933,6 +937,11 @@ static struct option stat_options[] = {
 		    "Use with 'percore' event qualifier to show the event "
 		    "counts of one hardware thread by sum up total hardware "
 		    "threads of same physical core"),
+#ifdef HAVE_LIBPFM
+	OPT_CALLBACK(0, "pfm-events", &evsel_list, "event",
+		"libpfm4 event selector. use 'perf list' to list available events",
+		parse_libpfm_events_option),
+#endif
 	OPT_END()
 };
 
@@ -1871,6 +1880,10 @@ int cmd_stat(int argc, const char **argv)
 	unsigned int interval, timeout;
 	const char * const stat_subcommands[] = { "record", "report" };
 
+#ifdef HAVE_LIBPFM
+	libpfm_initialize();
+#endif
+
 	setlocale(LC_ALL, "");
 
 	evsel_list = evlist__new();
tools/perf/builtin-top.c +8 -0
index 289cf83e658a..f04e2e639894 100644
@@ -52,6 +52,7 @@
 
 #include "util/debug.h"
 #include "util/ordered-events.h"
+#include "util/pfm.h"
 
 #include <assert.h>
 #include <elf.h>
@@ -1571,6 +1572,11 @@ int cmd_top(int argc, const char **argv)
 		    "Sort the output by the event at the index n in group. "
 		    "If n is invalid, sort by the first event. "
 		    "WARNING: should be used on grouped events."),
+#ifdef HAVE_LIBPFM
+	OPT_CALLBACK(0, "pfm-events", &top.evlist, "event",
+		"libpfm4 event selector. use 'perf list' to list available events",
+		parse_libpfm_events_option),
+#endif
 	OPTS_EVSWITCH(&top.evswitch),
 	OPT_END()
 	};
@@ -1584,6 +1590,8 @@ int cmd_top(int argc, const char **argv)
 	if (status < 0)
 		return status;
 
+	libpfm_initialize();
+
 	top.annotation_opts.min_pcnt = 5;
 	top.annotation_opts.context  = 4;
 
tools/perf/tests/Build +1 -0
index b3d1bf13ca07..7d2ccec9fd75 100644
@@ -56,6 +56,7 @@ perf-y += mem2node.o
 perf-y += maps.o
 perf-y += time-utils-test.o
 perf-y += genelf.o
+perf-y += pfm.o
 
 $(OUTPUT)tests/llvm-src-base.c: tests/bpf-script-example.c tests/Build
 	$(call rule_mkdir)
tools/perf/tests/builtin-test.c +9 -0
index b6322eb0f423..8b323151f22c 100644
@@ -313,6 +313,15 @@ static struct test generic_tests[] = {
 		.desc = "maps__merge_in",
 		.func = test__maps__merge_in,
 	},
+	{
+		.desc = "Test libpfm4 support",
+		.func = test__pfm,
+		.subtest = {
+			.skip_if_fail	= true,
+			.get_nr		= test__pfm_subtest_get_nr,
+			.get_desc	= test__pfm_subtest_get_desc,
+		}
+	},
 	{
 		.func = NULL,
 	},
tools/perf/tests/pfm.c new file +207 -0

207 lines not on this page · raw message

tools/perf/tests/tests.h +3 -0
index 61a1ab032080..47cbae753b42 100644
@@ -112,6 +112,9 @@ int test__mem2node(struct test *t, int subtest);
 int test__maps__merge_in(struct test *t, int subtest);
 int test__time_utils(struct test *t, int subtest);
 int test__jit_write_elf(struct test *test, int subtest);
+int test__pfm(struct test *test, int subtest);
+const char *test__pfm_subtest_get_desc(int subtest);
+int test__pfm_subtest_get_nr(void);
 
 bool test__bp_signal_is_supported(void);
 bool test__bp_account_is_supported(void);
tools/perf/util/Build +2 -0
index c0cf8dff694e..afd3d2221c83 100644
@@ -177,6 +177,8 @@ perf-$(CONFIG_LIBBPF) += bpf-event.o
 
 perf-$(CONFIG_CXX) += c++/
 
+perf-$(CONFIG_LIBPFM4) += pfm.o
+
 CFLAGS_config.o   += -DETC_PERFCONFIG="BUILD_STR($(ETC_PERFCONFIG_SQ))"
 CFLAGS_llvm-utils.o += -DPERF_INCLUDE_DIR="BUILD_STR($(perf_include_dir_SQ))"
 
tools/perf/util/evsel.c +1 -1
index d23db6755f51..6ab04b58d2c8 100644
@@ -2448,7 +2448,7 @@ bool perf_evsel__fallback(struct evsel *evsel, int err,
 
 		/* Is there already the separator in the name. */
 		if (strchr(name, '/') ||
-		    strchr(name, ':'))
+		    (strchr(name, ':') && !evsel->is_libpfm_event))
 			sep = "";
 
 		if (asprintf(&new_name, "%s%su", name, sep) < 0)
tools/perf/util/evsel.h +1 -0
index 53187c501ee8..0b6eec714e6f 100644
@@ -76,6 +76,7 @@ struct evsel {
 	bool			ignore_missing_thread;
 	bool			forced_leader;
 	bool			use_uncore_alias;
+	bool			is_libpfm_event;
 	/* parse modifier helper */
 	int			exclude_GH;
 	int			sample_read;
tools/perf/util/parse-events.c +23 -7
index 10107747b361..e7e0faf36e3c 100644
@@ -36,6 +36,7 @@
 #include "metricgroup.h"
 #include "util/evsel_config.h"
 #include "util/event.h"
+#include "util/pfm.h"
 
 #define MAX_NAME_LEN 100
 
@@ -344,6 +345,7 @@ static char *get_config_name(struct list_head *head_terms)
 static struct evsel *
 __add_event(struct list_head *list, int *idx,
 	    struct perf_event_attr *attr,
+	    bool init_attr,
 	    char *name, struct perf_pmu *pmu,
 	    struct list_head *config_terms, bool auto_merge_stats,
 	    const char *cpu_list)
@@ -352,7 +354,8 @@ __add_event(struct list_head *list, int *idx,
 	struct perf_cpu_map *cpus = pmu ? pmu->cpus :
 			       cpu_list ? perf_cpu_map__new(cpu_list) : NULL;
 
-	event_attr_init(attr);
+	if (init_attr)
+		event_attr_init(attr);
 
 	evsel = perf_evsel__new_idx(attr, *idx);
 	if (!evsel)
@@ -370,15 +373,25 @@ __add_event(struct list_head *list, int *idx,
 	if (config_terms)
 		list_splice(config_terms, &evsel->config_terms);
 
-	list_add_tail(&evsel->core.node, list);
+	if (list)
+		list_add_tail(&evsel->core.node, list);
+
 	return evsel;
 }
 
+struct evsel *parse_events__add_event(int idx, struct perf_event_attr *attr,
+					char *name, struct perf_pmu *pmu)
+{
+	return __add_event(NULL, &idx, attr, false, name, pmu, NULL, false,
+			   NULL);
+}
+
 static int add_event(struct list_head *list, int *idx,
 		     struct perf_event_attr *attr, char *name,
 		     struct list_head *config_terms)
 {
-	return __add_event(list, idx, attr, name, NULL, config_terms, false, NULL) ? 0 : -ENOMEM;
+	return __add_event(list, idx, attr, true, name, NULL, config_terms,
+			   false, NULL) ? 0 : -ENOMEM;
 }
 
 static int add_event_tool(struct list_head *list, int *idx,
@@ -390,7 +403,8 @@ static int add_event_tool(struct list_head *list, int *idx,
 		.config = PERF_COUNT_SW_DUMMY,
 	};
 
-	evsel = __add_event(list, idx, &attr, NULL, NULL, NULL, false, "0");
+	evsel = __add_event(list, idx, &attr, true, NULL, NULL, NULL, false,
+			    "0");
 	if (!evsel)
 		return -ENOMEM;
 	evsel->tool_event = tool_event;
@@ -1446,8 +1460,8 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 
 	if (!head_config) {
 		attr.type = pmu->type;
-		evsel = __add_event(list, &parse_state->idx, &attr, NULL, pmu, NULL,
-				    auto_merge_stats, NULL);
+		evsel = __add_event(list, &parse_state->idx, &attr, true, NULL,
+				    pmu, NULL, auto_merge_stats, NULL);
 		if (evsel) {
 			evsel->pmu_name = name ? strdup(name) : NULL;
 			evsel->use_uncore_alias = use_uncore_alias;
@@ -1487,7 +1501,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 		return -EINVAL;
 	}
 
-	evsel = __add_event(list, &parse_state->idx, &attr,
+	evsel = __add_event(list, &parse_state->idx, &attr, true,
 			    get_config_name(head_config), pmu,
 			    &config_terms, auto_merge_stats, NULL);
 	if (evsel) {
@@ -2794,6 +2808,8 @@ void print_events(const char *event_glob, bool name_only, bool quiet_flag,
 	print_sdt_events(NULL, NULL, name_only);
 
 	metricgroup__print(true, true, NULL, name_only, details_flag);
+
+	print_libpfm_events(name_only, long_desc);
 }
 
 int parse_events__is_hardcoded_term(struct parse_events_term *term)
tools/perf/util/parse-events.h +4 -0
index 27596cbd0ba0..f7f555b1ca35 100644
@@ -17,6 +17,7 @@ struct evlist;
 struct parse_events_error;
 
 struct option;
+struct perf_pmu;
 
 struct tracepoint_path {
 	char *system;
@@ -186,6 +187,9 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 			 bool auto_merge_stats,
 			 bool use_alias);
 
+struct evsel *parse_events__add_event(int idx, struct perf_event_attr *attr,
+					char *name, struct perf_pmu *pmu);
+
 int parse_events_multi_pmu_add(struct parse_events_state *parse_state,
 			       char *str,
 			       struct list_head **listp);
tools/perf/util/pfm.c new file +278 -0

278 lines not on this page · raw message

tools/perf/util/pfm.h new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
2.26.0.110.g2183baf09c-goog